Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial core fixes for 6.5-rc7 that resolve
a lot of reported issues.

Primarily in here are the fixes for the serial bus code from Tony that
came in -rc1, as it hit wider testing with the huge number of
different types of systems and serial ports. All of the reported
issues with duplicate names and other issues with this code are now
resolved.

Other than that included in here is:

- n_gsm fix for a previous fix

- 8250 lockdep annotation fix

- fsl_lpuart serial driver fix

- TIOCSTI documentation update for previous CAP_SYS_ADMIN change

All of these have been in linux-next for a while with no reported
problems"

* tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: core: Fix serial core port id, including multiport devices
serial: 8250: drop lockdep annotation from serial8250_clear_IER()
tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
serial: core: Revert port_id use
TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig
serial: 8250: Fix oops for port->pm on uart_change_pm()
serial: 8250: Reinit port_id when adding back serial8250_isa_devs
serial: core: Fix kmemleak issue for serial core device remove
MAINTAINERS: Merge TTY layer and serial drivers
serial: core: Fix serial_base_match() after fixing controller port name
serial: core: Fix serial core controller port name to show controller id
serial: core: Fix serial core port id to not use port->line
serial: core: Controller id cannot be negative
tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms

Pull rust fix from Miguel Ojeda:

- Macros: fix 'HAS_*' redefinition by the '#[vtable]' macro
under conditional compilation

* tag 'rust-fixes-6.5-rc7' of https://github.com/Rust-for-Linux/linux:
rust: macros: vtable: fix `HAS_*` redefinition (`gen_const_name`)

We want to fix the serial core port DEVNAME to use a port id of the
hardware specific controller port instance instead of the port->line.

For example, the 8250 driver sets up a number of serial8250 ports
initially that can be inherited by the hardware specific driver. At that
the port->line no longer decribes the port's relation to the serial core
controller instance.

Let's fix the issue by assigning port->port_id for each serial core
controller port instance.

Fixes: 7d695d83767c ("serial: core: Fix serial_base_match() after fixing controller port name")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811103648.2826-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull i2c fixes from Wolfram Sang:
"Usual set of driver fixes. A bit more than usual because I was
unavailable for a while"

* tag 'i2c-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue
i2c: Update documentation to use .probe() again
i2c: sun6i-p2wi: Fix an error message in probe()
i2c: hisi: Only handle the interrupt of the driver's transfer
i2c: tegra: Fix i2c-tegra DMA config option processing
i2c: tegra: Fix failure during probe deferral cleanup
i2c: designware: Handle invalid SMBus block data response length value
i2c: designware: Correct length byte validation logic
i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work

If we define the same function name twice in a trait (using `#[cfg]`),
the `vtable` macro will redefine its `gen_const_name`, e.g. this will
define `HAS_BAR` twice:

#[vtable]
pub trait Foo {
#[cfg(CONFIG_X)]
fn bar();

#[cfg(not(CONFIG_X))]
fn bar(x: usize);
}

Fixes: b44becc5ee80 ("rust: macros: add `#[vtable]` proc macro")
Signed-off-by: Qingsong Chen <changxian.cqs@antgroup.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Sergio González Collado <sergio.collado@gmail.com>
Link: https://lore.kernel.org/r/20230808025404.2053471-1-changxian.cqs@antgroup.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

The port lock is not always held when calling serial8250_clear_IER().
When an oops is in progress, the lock is tried to be taken and when it
is not, a warning is issued:
WARNING: CPU: 0 PID: 1 at drivers/tty/serial/8250/8250_port.c:707 +0x57/0x60
Modules linked in:
CPU: 0 PID: 1 Comm: init Not tainted 6.5.0-rc5-1.g225bfb7-default+ #774 00f1be860db663ed29479b8255d3b01ab1135bd3
Hardware name: QEMU Standard PC ...
RIP: 0010:serial8250_clear_IER+0x57/0x60
...
Call Trace:
<TASK>
serial8250_console_write+0x9e/0x4b0
console_flush_all+0x217/0x5f0
...

Therefore, remove the annotation as it doesn't hold for all invocations.

The other option would be to make the lockdep test conditional on
'oops_in_progress' or pass 'locked' from serial8250_console_write(). I
don't think, that is worth it.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Cc: John Ogness <john.ogness@linutronix.de>
Fixes: d0b309a5d3f4 (serial: 8250: synchronize and annotate UART_IER access)
Link: https://lore.kernel.org/r/20230811064340.13400-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull btrfs fixes from David Sterba:

- fix infinite loop in readdir(), could happen in a big directory when
files get renamed during enumeration

- fix extent map handling of skipped pinned ranges

- fix a corner case when handling ordered extent length

- fix a potential crash when balance cancel races with pause

- verify correct uuid when starting scrub or device replace

* tag 'for-6.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix incorrect splitting in btrfs_drop_extent_map_range
btrfs: fix BUG_ON condition in btrfs_cancel_balance
btrfs: only subtract from len_to_oe_boundary when it is tracking an extent
btrfs: fix replace/scrub failure with metadata_uuid
btrfs: fix infinite directory reads

iproc_i2c_rd_reg() and iproc_i2c_wr_reg() are called from both
interrupt context (e.g. bcm_iproc_i2c_isr) and process context
(e.g. bcm_iproc_i2c_suspend). Therefore, interrupts should be
disabled to avoid potential deadlock. To prevent this scenario,
use spin_lock_irqsave().

Fixes: 9a1038728037 ("i2c: iproc: add NIC I2C support")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

In commit 9b9c8195f3f0 ("tty: n_gsm: fix UAF in gsm_cleanup_mux"), the UAF
problem is not completely fixed. There is a race condition in
gsm_cleanup_mux(), which caused this UAF.

The UAF problem is triggered by the following race:
task[5046] task[5054]
----------------------- -----------------------
gsm_cleanup_mux();
dlci = gsm->dlci[0];
mutex_lock(&gsm->mutex);
gsm_cleanup_mux();
dlci = gsm->dlci[0]; //Didn't take the lock
gsm_dlci_release(gsm->dlci[i]);
gsm->dlci[i] = NULL;
mutex_unlock(&gsm->mutex);
mutex_lock(&gsm->mutex);
dlci->dead = true; //UAF

Fix it by assigning values after mutex_lock().

Link: https://syzkaller.appspot.com/text?tag=CrashReport&x=176188b5a80000
Cc: stable <stable@kernel.org>
Fixes: 9b9c8195f3f0 ("tty: n_gsm: fix UAF in gsm_cleanup_mux")
Fixes: aa371e96f05d ("tty: n_gsm: fix restart handling via CLD command")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Co-developed-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Signed-off-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Link: https://lore.kernel.org/r/20230811031121.153237-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull fbdev fixes and cleanups from Helge Deller:

- various code cleanups in amifb, atmel_lcdfb, ssd1307fb, kyro and
goldfishfb

* tag 'fbdev-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: goldfishfb: Do not check 0 for platform_get_irq()
fbdev: atmel_lcdfb: Remove redundant of_match_ptr()
fbdev: kyro: Remove unused declarations
fbdev: ssd1307fb: Print the PWM's label instead of its number
fbdev: mmp: fix value check in mmphw_probe()
fbdev: amifb: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper

In production we were seeing a variety of WARN_ON()'s in the extent_map
code, specifically in btrfs_drop_extent_map_range() when we have to call
add_extent_mapping() for our second split.

Consider the following extent map layout

PINNED
[0 16K) [32K, 48K)

and then we call btrfs_drop_extent_map_range for [0, 36K), with
skip_pinned == true. The initial loop will have

start = 0
end = 36K
len = 36K

we will find the [0, 16k) extent, but since we are pinned we will skip
it, which has this code

start = em_end;
if (end != (u64)-1)
len = start + len - em_end;

em_end here is 16K, so now the values are

start = 16K
len = 16K + 36K - 16K = 36K

len should instead be 20K. This is a problem when we find the next
extent at [32K, 48K), we need to split this extent to leave [36K, 48k),
however the code for the split looks like this

split->start = start + len;
split->len = em_end - (start + len);

In this case we have

em_end = 48K
split->start = 16K + 36K // this should be 16K + 20K
split->len = 48K - (16K + 36K) // this overflows as 16K + 36K is 52K

and now we have an invalid extent_map in the tree that potentially
overlaps other entries in the extent map. Even in the non-overlapping
case we will have split->start set improperly, which will cause problems
with any block related calculations.

We don't actually need len in this loop, we can simply use end as our
end point, and only adjust start up when we find a pinned extent we need
to skip.

Adjust the logic to do this, which keeps us from inserting an invalid
extent map.

We only skip_pinned in the relocation case, so this is relatively rare,
except in the case where you are running relocation a lot, which can
happen with auto relocation on.

Fixes: 55ef68990029 ("Btrfs: Fix btrfs_drop_extent_cache for skip pinned case")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Since commit 03c835f498b5 ("i2c: Switch .probe() to not take an id
parameter") .probe() is the recommended callback to implement (again).
Reflect this in the documentation and don't mention .probe_new() any
more.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Pull vfs fixes from Christian Brauner:

- Fix a wrong check for O_TMPFILE during RESOLVE_CACHED lookup

- Clean up directory iterators and clarify file_needs_f_pos_lock()

* tag 'v6.5-rc5.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: rely on ->iterate_shared to determine f_pos locking
vfs: get rid of old '->iterate' directory operation
proc: fix missing conversion to 'iterate_shared'
open: make RESOLVE_CACHED correctly test for O_TMPFILE

Guenter reports boot issues with duplicate sysfs entries for multiport
drivers. Let's go back to using port->line for now to fix the regression.

With this change, the serial core port device names are not correct for the
hardware specific 8250 single port drivers, but that's a cosmetic issue for
now.

Fixes: d962de6ae51f ("serial: core: Fix serial core port id to not use port->line")
Reported-by: Guenter Roeck <groeck7@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230806062052.47737-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>