net: stmmac: platform: guarantee uniqueness of bus_id

bus_id is currently derived from the ethernetX alias. If one is missing
for the device, 0 is used. If ethernet0 points to another stmmac device
or if there are 2+ stmmac devices without an ethernet alias, then bus_id
will be 0 for all of those.

This is an issue because the bus_id is used to generate the mdio bus id
(new_bus->id in drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
stmmac_mdio_register) and this needs to be unique.

This allows to avoid needing to define ethernet aliases for devices with
multiple stmmac controllers (such as the Rockchip RK3588) for multiple
stmmac devices to probe properly.

Obviously, the bus_id isn't guaranteed to be stable across reboots if no
alias is set for the device but that is easily fixed by simply adding an
alias if this is desired.

Fixes: 25c83b5c2e82 ("dt:net:stmmac: Add support to dwmac version 3.610 and 3.710")
Signed-off-by: Quentin Schulz <[e-mail]>
Reviewed-by: Maxime Chevallier <[e-mail]>
Link: https://patch.msgid.link/[e-mail]
Signed-off-by: Paolo Abeni <[e-mail]>

drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c

···
 	struct device_node *np = pdev->dev.of_node;
 	struct plat_stmmacenet_data *plat;
 	struct stmmac_dma_cfg *dma_cfg;
+	static int bus_id = -ENODEV;
 	int phy_mode;
 	void *ret;
 	int rc;
···
 	of_property_read_u32(np, "max-speed", &plat->max_speed);
 
 	plat->bus_id = of_alias_get_id(np, "ethernet");
-	if (plat->bus_id < 0)
-		plat->bus_id = 0;
+	if (plat->bus_id < 0) {
+		if (bus_id < 0)
+			bus_id = of_alias_get_highest_id("ethernet");
+		/* No ethernet alias found, init at -1 so first bus_id is 0 */
+		if (bus_id < 0)
+			bus_id = -1;
+		plat->bus_id = ++bus_id;
+	}
 
 	/* Default to phy auto-detection */
 	plat->phy_addr = -1;