tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
staging: iio: accel: adis16203: Fix 'line over 80 characters' warning
Many of the comments in the same lines with #define
caused checkpatch warning 'line over 80 characters'.
Move all such comments to line before #define.
This style is already used in some other .h files in accel:
Add blank lines after #define to improve readability.
Signed-off-by: Svetlana Orlik <sveta.orlik.code@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
authored by
Svetlana Orlik
and committed by
Greg Kroah-Hartman
a48b2362
81da8a89
+99
-33
+99
-33
drivers/staging/iio/accel/adis16203.h
+99
-33
drivers/staging/iio/accel/adis16203.h
···
3
3
4
4
#define ADIS16203_STARTUP_DELAY 220 /* ms */
5
5
6
-
#define ADIS16203_FLASH_CNT 0x00 /* Flash memory write count */
7
-
#define ADIS16203_SUPPLY_OUT 0x02 /* Output, power supply */
8
-
#define ADIS16203_AUX_ADC 0x08 /* Output, auxiliary ADC input */
9
-
#define ADIS16203_TEMP_OUT 0x0A /* Output, temperature */
10
-
#define ADIS16203_XINCL_OUT 0x0C /* Output, x-axis inclination */
11
-
#define ADIS16203_YINCL_OUT 0x0E /* Output, y-axis inclination */
12
-
#define ADIS16203_INCL_NULL 0x18 /* Incline null calibration */
13
-
#define ADIS16203_ALM_MAG1 0x20 /* Alarm 1 amplitude threshold */
14
-
#define ADIS16203_ALM_MAG2 0x22 /* Alarm 2 amplitude threshold */
15
-
#define ADIS16203_ALM_SMPL1 0x24 /* Alarm 1, sample period */
16
-
#define ADIS16203_ALM_SMPL2 0x26 /* Alarm 2, sample period */
17
-
#define ADIS16203_ALM_CTRL 0x28 /* Alarm control */
18
-
#define ADIS16203_AUX_DAC 0x30 /* Auxiliary DAC data */
19
-
#define ADIS16203_GPIO_CTRL 0x32 /* General-purpose digital input/output control */
20
-
#define ADIS16203_MSC_CTRL 0x34 /* Miscellaneous control */
21
-
#define ADIS16203_SMPL_PRD 0x36 /* Internal sample period (rate) control */
22
-
#define ADIS16203_AVG_CNT 0x38 /* Operation, filter configuration */
23
-
#define ADIS16203_SLP_CNT 0x3A /* Operation, sleep mode control */
24
-
#define ADIS16203_DIAG_STAT 0x3C /* Diagnostics, system status register */
25
-
#define ADIS16203_GLOB_CMD 0x3E /* Operation, system command register */
6
+
/* Flash memory write count */
7
+
#define ADIS16203_FLASH_CNT 0x00
8
+
9
+
/* Output, power supply */
10
+
#define ADIS16203_SUPPLY_OUT 0x02
11
+
12
+
/* Output, auxiliary ADC input */
13
+
#define ADIS16203_AUX_ADC 0x08
14
+
15
+
/* Output, temperature */
16
+
#define ADIS16203_TEMP_OUT 0x0A
17
+
18
+
/* Output, x-axis inclination */
19
+
#define ADIS16203_XINCL_OUT 0x0C
20
+
21
+
/* Output, y-axis inclination */
22
+
#define ADIS16203_YINCL_OUT 0x0E
23
+
24
+
/* Incline null calibration */
25
+
#define ADIS16203_INCL_NULL 0x18
26
+
27
+
/* Alarm 1 amplitude threshold */
28
+
#define ADIS16203_ALM_MAG1 0x20
29
+
30
+
/* Alarm 2 amplitude threshold */
31
+
#define ADIS16203_ALM_MAG2 0x22
32
+
33
+
/* Alarm 1, sample period */
34
+
#define ADIS16203_ALM_SMPL1 0x24
35
+
36
+
/* Alarm 2, sample period */
37
+
#define ADIS16203_ALM_SMPL2 0x26
38
+
39
+
/* Alarm control */
40
+
#define ADIS16203_ALM_CTRL 0x28
41
+
42
+
/* Auxiliary DAC data */
43
+
#define ADIS16203_AUX_DAC 0x30
44
+
45
+
/* General-purpose digital input/output control */
46
+
#define ADIS16203_GPIO_CTRL 0x32
47
+
48
+
/* Miscellaneous control */
49
+
#define ADIS16203_MSC_CTRL 0x34
50
+
51
+
/* Internal sample period (rate) control */
52
+
#define ADIS16203_SMPL_PRD 0x36
53
+
54
+
/* Operation, filter configuration */
55
+
#define ADIS16203_AVG_CNT 0x38
56
+
57
+
/* Operation, sleep mode control */
58
+
#define ADIS16203_SLP_CNT 0x3A
59
+
60
+
/* Diagnostics, system status register */
61
+
#define ADIS16203_DIAG_STAT 0x3C
62
+
63
+
/* Operation, system command register */
64
+
#define ADIS16203_GLOB_CMD 0x3E
26
65
27
66
/* MSC_CTRL */
28
-
#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST BIT(10) /* Self-test at power-on: 1 = disabled, 0 = enabled */
29
-
#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN BIT(9) /* Reverses rotation of both inclination outputs */
30
-
#define ADIS16203_MSC_CTRL_SELF_TEST_EN BIT(8) /* Self-test enable */
31
-
#define ADIS16203_MSC_CTRL_DATA_RDY_EN BIT(2) /* Data-ready enable: 1 = enabled, 0 = disabled */
32
-
#define ADIS16203_MSC_CTRL_ACTIVE_HIGH BIT(1) /* Data-ready polarity: 1 = active high, 0 = active low */
33
-
#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 BIT(0) /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
67
+
68
+
/* Self-test at power-on: 1 = disabled, 0 = enabled */
69
+
#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST BIT(10)
70
+
71
+
/* Reverses rotation of both inclination outputs */
72
+
#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN BIT(9)
73
+
74
+
/* Self-test enable */
75
+
#define ADIS16203_MSC_CTRL_SELF_TEST_EN BIT(8)
76
+
77
+
/* Data-ready enable: 1 = enabled, 0 = disabled */
78
+
#define ADIS16203_MSC_CTRL_DATA_RDY_EN BIT(2)
79
+
80
+
/* Data-ready polarity: 1 = active high, 0 = active low */
81
+
#define ADIS16203_MSC_CTRL_ACTIVE_HIGH BIT(1)
82
+
83
+
/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
84
+
#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
34
85
35
86
/* DIAG_STAT */
36
-
#define ADIS16203_DIAG_STAT_ALARM2 BIT(9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
37
-
#define ADIS16203_DIAG_STAT_ALARM1 BIT(8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
38
-
#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag */
39
-
#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT 3 /* SPI communications failure */
40
-
#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT 2 /* Flash update failure */
41
-
#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT 1 /* Power supply above 3.625 V */
42
-
#define ADIS16203_DIAG_STAT_POWER_LOW_BIT 0 /* Power supply below 3.15 V */
87
+
88
+
/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
89
+
#define ADIS16203_DIAG_STAT_ALARM2 BIT(9)
90
+
91
+
/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
92
+
#define ADIS16203_DIAG_STAT_ALARM1 BIT(8)
93
+
94
+
/* Self-test diagnostic error flag */
95
+
#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5
96
+
97
+
/* SPI communications failure */
98
+
#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT 3
99
+
100
+
/* Flash update failure */
101
+
#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT 2
102
+
103
+
/* Power supply above 3.625 V */
104
+
#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT 1
105
+
106
+
/* Power supply below 3.15 V */
107
+
#define ADIS16203_DIAG_STAT_POWER_LOW_BIT 0
43
108
44
109
/* GLOB_CMD */
110
+
45
111
#define ADIS16203_GLOB_CMD_SW_RESET BIT(7)
46
112
#define ADIS16203_GLOB_CMD_CLEAR_STAT BIT(4)
47
113
#define ADIS16203_GLOB_CMD_FACTORY_CAL BIT(1)