arm64: Mark the Applied Micro X-Gene SATA controller as DMA coherent

Since the default DMA ops for arm64 are non-coherent, mark the X-Gene
controller explicitly as dma-coherent to avoid additional cache
maintenance.

Signed-off-by: Catalin Marinas <[e-mail]>
Cc: Loc Ho <[e-mail]>

Documentation/devicetree/bindings/ata/apm-xgene.txt

···
   * "sata-phy" for the SATA 6.0Gbps PHY
 
 Optional properties:
+- dma-coherent		: Present if dma operations are coherent
 - status		: Shall be "ok" if enabled or "disabled" if disabled.
 			  Default is "ok".
 
···
 			      <0x0 0x1f22e000 0x0 0x1000>,
 			      <0x0 0x1f227000 0x0 0x1000>;
 			interrupts = <0x0 0x87 0x4>;
+			dma-coherent;
 			status = "ok";
 			clocks = <&sataclk 0>;
 			phys = <&phy2 0>;
···
 			      <0x0 0x1f23e000 0x0 0x1000>,
 			      <0x0 0x1f237000 0x0 0x1000>;
 			interrupts = <0x0 0x88 0x4>;
+			dma-coherent;
 			status = "ok";
 			clocks = <&sataclk 0>;
 			phys = <&phy3 0>;

arch/arm64/boot/dts/apm-storm.dtsi

···
 			      <0x0 0x1f21e000 0x0 0x1000>,
 			      <0x0 0x1f217000 0x0 0x1000>;
 			interrupts = <0x0 0x86 0x4>;
+			dma-coherent;
 			status = "disabled";
 			clocks = <&sata01clk 0>;
 			phys = <&phy1 0>;
···
 			      <0x0 0x1f22e000 0x0 0x1000>,
 			      <0x0 0x1f227000 0x0 0x1000>;
 			interrupts = <0x0 0x87 0x4>;
+			dma-coherent;
 			status = "ok";
 			clocks = <&sata23clk 0>;
 			phys = <&phy2 0>;
···
 			      <0x0 0x1f23d000 0x0 0x1000>,
 			      <0x0 0x1f23e000 0x0 0x1000>;
 			interrupts = <0x0 0x88 0x4>;
+			dma-coherent;
 			status = "ok";
 			clocks = <&sata45clk 0>;
 			phys = <&phy3 0>;