[media] mceusb: add support for Conexant Hybrid TV RDU253S

Another multi-function Conexant device. Interface 0 is IR, though on
this model, TX isn't wired up at all, so I've mixed in support for
models without TX (and verified that lircd says TX isn't supported when
trying to send w/this device).

Signed-off-by: Jarod Wilson <[e-mail]>
Signed-off-by: Mauro Carvalho Chehab <[e-mail]>

drivers/media/IR/mceusb.c

···
 	MCE_GEN3,
 	MCE_GEN2_TX_INV,
 	POLARIS_EVK,
+	CX_HYBRID_TV,
 };
 
 struct mceusb_model {
···
 	u32 mce_gen3:1;
 	u32 tx_mask_inverted:1;
 	u32 is_polaris:1;
+	u32 no_tx:1;
 
 	const char *rc_map;	/* Allow specify a per-board map */
 	const char *name;	/* per-board name */
···
 		 * to allow testing it
 		 */
 		.rc_map = RC_MAP_RC5_HAUPPAUGE_NEW,
-		.name = "cx231xx MCE IR",
+		.name = "Conexant Hybrid TV (cx231xx) MCE IR",
+	},
+	[CX_HYBRID_TV] = {
+		.is_polaris = 1,
+		.no_tx = 1, /* tx isn't wired up at all */
+		.name = "Conexant Hybrid TV (cx231xx) MCE IR",
 	},
 };
 
···
 	{ USB_DEVICE(VENDOR_NORTHSTAR, 0xe004) },
 	/* TiVo PC IR Receiver */
 	{ USB_DEVICE(VENDOR_TIVO, 0x2000) },
-	/* Conexant SDK */
+	/* Conexant Hybrid TV "Shelby" Polaris SDK */
 	{ USB_DEVICE(VENDOR_CONEXANT, 0x58a1),
 	  .driver_info = POLARIS_EVK },
+	/* Conexant Hybrid TV RDU253S Polaris */
+	{ USB_DEVICE(VENDOR_CONEXANT, 0x58a5),
+	  .driver_info = CX_HYBRID_TV },
 	/* Terminating entry */
 	{ }
 };
···
 		u32 connected:1;
 		u32 tx_mask_inverted:1;
 		u32 microsoft_gen1:1;
+		u32 no_tx:1;
 	} flags;
 
 	/* transmit support */
···
 	return ret ? ret : n;
 }
 
-/* Sets active IR outputs -- mce devices typically (all?) have two */
+/* Sets active IR outputs -- mce devices typically have two */
 static int mceusb_set_tx_mask(void *priv, u32 mask)
 {
 	struct mceusb_dev *ir = priv;
···
 	mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
 	mce_sync_in(ir, NULL, maxp);
 
-	/* get the transmitter bitmask */
-	mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
-	mce_sync_in(ir, NULL, maxp);
+	if (!ir->flags.no_tx) {
+		/* get the transmitter bitmask */
+		mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
+		mce_sync_in(ir, NULL, maxp);
+	}
 
 	/* get receiver timeout value */
 	mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
···
 	props->priv = ir;
 	props->driver_type = RC_DRIVER_IR_RAW;
 	props->allowed_protos = IR_TYPE_ALL;
-	props->s_tx_mask = mceusb_set_tx_mask;
-	props->s_tx_carrier = mceusb_set_tx_carrier;
-	props->tx_ir = mceusb_tx_ir;
+	if (!ir->flags.no_tx) {
+		props->s_tx_mask = mceusb_set_tx_mask;
+		props->s_tx_carrier = mceusb_set_tx_carrier;
+		props->tx_ir = mceusb_tx_ir;
+	}
 
 	ir->props = props;
 
···
 	ir->len_in = maxp;
 	ir->flags.microsoft_gen1 = is_microsoft_gen1;
 	ir->flags.tx_mask_inverted = tx_mask_inverted;
+	ir->flags.no_tx = mceusb_model[model].no_tx;
 	ir->model = model;
 
 	init_ir_raw_event(&ir->rawir);
···
 
 	mceusb_get_parameters(ir);
 
-	mceusb_set_tx_mask(ir, MCE_DEFAULT_TX_MASK);
+	if (!ir->flags.no_tx)
+		mceusb_set_tx_mask(ir, MCE_DEFAULT_TX_MASK);
 
 	usb_set_intfdata(intf, ir);