Merge tag 'v4.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts32 updates for 4.12 part1" from Heiko Stübner:

Contains one new board, the Tinkerboard from Asus based on the rk3288,
definitions for the mmc resets in the socs reset controller, sound
support for the Rock2, dma support for mmc controllers on the rk3188
and a led-fix for the MiQi board and and irq-fix for older Cortex-A9 socs.

* tag 'v4.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: setup DMA-channels for mmc0 and emmc for rk3188
ARM: dts: rockchip: fix PPI misconfiguration on Cortex-A9 socs
ARM: dts: rockchip: add rk322x dw-mmc resets
ARM: dts: rockchip: add rk3066/rk3188 dw-mmc resets
ARM: dts: rockchip: add rk3036 dw-mmc resets
ARM: dts: rockchip: add rk3288 dw-mmc resets
ARM: dts: rockchip: add dts for RK3288-Tinker board
dt-bindings: add rk3288-based Asus Tinker board
ARM: dts: rockchip: fix the MiQi board's LED definition
ARM: dts: rockchip: Add support for ES8388 to the Radxa Rock 2

Documentation/devicetree/bindings/arm/rockchip.txt

···
 Rockchip platforms device tree bindings
 ---------------------------------------
+- Asus Tinker board
+    Required root node properties:
+      - compatible = "asus,rk3288-tinker", "rockchip,rk3288";
 
 - Kylin RK3036 board:
     Required root node properties:

arch/arm/boot/dts/Makefile

···
 	rk3288-popmetal.dtb \
 	rk3288-r89.dtb \
 	rk3288-rock2-square.dtb \
+	rk3288-tinker.dtb \
 	rk3288-veyron-brain.dtb \
 	rk3288-veyron-jaq.dtb \
 	rk3288-veyron-jerry.dtb \

arch/arm/boot/dts/rk3036.dtsi

···
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_MMC0>;
+		reset-names = "reset";
 		status = "disabled";
 	};
 
···
 		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_SDIO>;
+		reset-names = "reset";
 		status = "disabled";
 	};
 
···
 		num-slots = <1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/rk3188.dtsi

···
 };
 
 &global_timer {
-	interrupts = <GIC_PPI 11 0xf04>;
+	interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 };
 
 &local_timer {
-	interrupts = <GIC_PPI 13 0xf04>;
+	interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 };
 
 &i2c0 {

arch/arm/boot/dts/rk322x.dtsi

···
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/rk3288-miqi.dts

···
 		compatible = "gpio-leds";
 
 		work {
-			gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
 			label = "miqi:green:user";
-			linux,default-trigger = "default-on";
-			pinctrl-names = "default";
-			pinctrl-0 = <&led_ctl>;
+			linux,default-trigger = "timer";
 		};
 	};
 
···
 
 		phy_rst: phy-rst {
 			rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-	};
-
-	leds {
-		led_ctl: led-ctl {
-			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 

arch/arm/boot/dts/rk3288-rock2-som.dtsi

···
 				regulator-always-on;
 			};
 
-			vcc_io: REG2 {
+			vcc_io: vccio_codec: REG2 {
 				regulator-name = "VCC_IO";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;

arch/arm/boot/dts/rk3288-rock2-square.dts

···
 		#sound-dai-cells = <0>;
 	};
 
+	sound-i2s {
+		compatible = "rockchip,rk3288-hdmi-analog";
+		pinctrl-names = "default";
+		pinctrl-0 = <&phone_ctl>, <&hp_det>;
+		rockchip,audio-codec = <&es8388>;
+		rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+		rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
+		rockchip,i2s-controller = <&i2s>;
+		rockchip,model = "I2S";
+		rockchip,routing = "Analog", "LOUT2",
+				   "Analog", "ROUT2";
+	};
+
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&hym8563>;
···
 	};
 };
 
+&i2c2 {
+	status = "okay";
+
+	es8388: es8388@10 {
+		compatible = "everest,es8388", "everest,es8328";
+		reg = <0x10>;
+		AVDD-supply = <&vccio_codec>;
+		DVDD-supply = <&vccio_codec>;
+		HPVDD-supply = <&vccio_codec>;
+		PVDD-supply = <&vccio_codec>;
+		clocks = <&cru SCLK_I2S0_OUT>;
+	};
+};
+
 &i2c5 {
+	status = "okay";
+};
+
+&i2s {
 	status = "okay";
 };
 
···
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		phone_ctl: phone-ctl {
+			rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 

arch/arm/boot/dts/rk3288-tinker.dts

···
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3288.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rockchip RK3288 Tinker Board";
+	compatible = "asus,rk3288-tinker", "rockchip,rk3288";
+
+	memory {
+		reg = <0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		button@0 {
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		act-led {
+			gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger="mmc0";
+		};
+
+		heartbeat-led {
+			gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger="heartbeat";
+		};
+
+		pwr-led {
+			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "rockchip,tinker-codec";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s>;
+		};
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	phy-supply = <&vcc33_lan>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+				<&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-ramp-delay = <6000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-ramp-delay = <6000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc18_ldo1: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_ldo1";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc33_mipi: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33_mipi";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc18_codec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_codec";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc33_sd: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc33_lan: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_lan";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	sdcard-supply = <&vccio_sd>;
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	eth_phy {
+		eth_phy_pwr: eth-phy-pwr {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
+					&pcfg_pull_up>;
+		};
+
+		dvs_1: dvs-1 {
+			rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
+					&pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
+					&pcfg_pull_down>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 \
+					&pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pwr_3g: pwr-3g {
+			rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc18_ldo1>;
+	status ="okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;			/* wp not hooked up */
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+	vmmc-supply = <&vcc33_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status= "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};

arch/arm/boot/dts/rk3288.dtsi

···
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0xff0c0000 0x4000>;
+		resets = <&cru SRST_MMC0>;
+		reset-names = "reset";
 		status = "disabled";
 	};
 
···
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0xff0d0000 0x4000>;
+		resets = <&cru SRST_SDIO0>;
+		reset-names = "reset";
 		status = "disabled";
 	};
 
···
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0xff0e0000 0x4000>;
+		resets = <&cru SRST_SDIO1>;
+		reset-names = "reset";
 		status = "disabled";
 	};
 
···
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0xff0f0000 0x4000>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/rk3xxx.dtsi

···
 	global_timer: global-timer@1013c200 {
 		compatible = "arm,cortex-a9-global-timer";
 		reg = <0x1013c200 0x20>;
-		interrupts = <GIC_PPI 11 0x304>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&cru CORE_PERI>;
 	};
 
 	local_timer: local-timer@1013c600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x1013c600 0x20>;
-		interrupts = <GIC_PPI 13 0x304>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&cru CORE_PERI>;
 	};
 
···
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
 		clock-names = "biu", "ciu";
+		dmas = <&dmac2 1>;
+		dma-names = "rx-tx";
 		fifo-depth = <256>;
+		resets = <&cru SRST_SDMMC>;
+		reset-names = "reset";
 		status = "disabled";
 	};
 
···
 		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
 		clock-names = "biu", "ciu";
+		dmas = <&dmac2 3>;
+		dma-names = "rx-tx";
 		fifo-depth = <256>;
+		resets = <&cru SRST_SDIO>;
+		reset-names = "reset";
 		status = "disabled";
 	};
 
···
 		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
 		clock-names = "biu", "ciu";
+		dmas = <&dmac2 4>;
+		dma-names = "rx-tx";
 		fifo-depth = <256>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
 		status = "disabled";
 	};