Merge tag 'ux500-dts-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

Ux500 DTS changes for the v4.20 kernel cycle.
Assorted housekeeping DTS patches.

* tag 'ux500-dts-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: dts: ux500: Mark PRCMU as syscon compatible
arm: dts: ste: Update coresight bindings for hardware port
ARM: dts: ste: Fix SPI controller node names
ARM: dts: ux500: Get rid of DTC warnings
ARM: dts: ux500: Fix LCDA clock line muxing
dt-bindings: arm: scu: Correct example SCU unit addresses
ARM: dts: ux500: Correct SCU unit address

Signed-off-by: Olof Johansson <[e-mail]>

Documentation/devicetree/bindings/arm/scu.txt

···
 
 Example:
 
-scu@a04100000 {
+scu@a0410000 {
 	compatible = "arm,cortex-a9-scu";
 	reg = <0xa0410000 0x100>;
 };

Documentation/devicetree/bindings/arm/ux500/boards.txt

···
 			      <0xa0410100 0x100>;
 		};
 
-		scu@a04100000 {
+		scu@a0410000 {
 			compatible = "arm,cortex-a9-scu";
 			reg = <0xa0410000 0x100>;
 		};

arch/arm/boot/dts/ste-dbx5x0.dtsi

···
 #include <dt-bindings/arm/ux500_pm_domains.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/ste-ab8500.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
···
 			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
 			clock-names = "apb_pclk", "atclk";
 			cpu = <&CPU0>;
-			port {
-				ptm0_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port0>;
+			out-ports {
+				port {
+					ptm0_out_port: endpoint {
+						remote-endpoint = <&funnel_in_port0>;
+					};
 				};
 			};
 		};
···
 			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
 			clock-names = "apb_pclk", "atclk";
 			cpu = <&CPU1>;
-			port {
-				ptm1_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port1>;
+			out-ports {
+				port {
+					ptm1_out_port: endpoint {
+						remote-endpoint = <&funnel_in_port1>;
+					};
 				};
 			};
 		};
···
 
 			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
 			clock-names = "apb_pclk", "atclk";
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/* funnel output ports */
-				port@0 {
-					reg = <0>;
+			out-ports {
+				port {
 					funnel_out_port: endpoint {
 						remote-endpoint =
 							<&replicator_in_port0>;
 					};
 				};
+			};
 
-				/* funnel input ports */
-				port@1 {
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
 					reg = <0>;
 					funnel_in_port0: endpoint {
-						slave-mode;
 						remote-endpoint = <&ptm0_out_port>;
 					};
 				};
 
-				port@2 {
+				port@1 {
 					reg = <1>;
 					funnel_in_port1: endpoint {
-						slave-mode;
 						remote-endpoint = <&ptm1_out_port>;
 					};
 				};
···
 			clocks = <&prcmu_clk PRCMU_APEATCLK>;
 			clock-names = "atclk";
 
-			ports {
+			out-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				/* replicator output ports */
 				port@0 {
 					reg = <0>;
 					replicator_out_port0: endpoint {
···
 						remote-endpoint = <&etb_in_port>;
 					};
 				};
+			};
 
-				/* replicator input port */
-				port@2 {
-					reg = <0>;
+			in-ports {
+				port {
 					replicator_in_port0: endpoint {
-						slave-mode;
 						remote-endpoint = <&funnel_out_port>;
 					};
 				};
···
 
 			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
 			clock-names = "apb_pclk", "atclk";
-			port {
-				tpiu_in_port: endpoint {
-					slave-mode;
-					remote-endpoint = <&replicator_out_port0>;
+			in-ports {
+				port {
+					tpiu_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port0>;
+					};
 				};
 			};
 		};
···
 
 			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
 			clock-names = "apb_pclk", "atclk";
-			port {
-				etb_in_port: endpoint {
-					slave-mode;
-					remote-endpoint = <&replicator_out_port1>;
+			in-ports {
+				port {
+					etb_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port1>;
+					};
 				};
 			};
 		};
···
 			      <0xa0410100 0x100>;
 		};
 
-		scu@a04100000 {
+		scu@a0410000 {
 			compatible = "arm,cortex-a9-scu";
 			reg = <0xa0410000 0x100>;
 		};
···
 		};
 
 		prcmu: prcmu@80157000 {
-			compatible = "stericsson,db8500-prcmu";
+			compatible = "stericsson,db8500-prcmu", "syscon";
 			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
 			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
···
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80002000 0x1000>;
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
···
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		ssp@80003000 {
+		spi@80003000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80003000 0x1000>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/ste-href-family-pinctrl.dtsi

···
 
 			mcde {
 				lcd_default_mode: lcd_default {
-					default_mux {
+					default_mux1 {
 						/* Mux in VSI0 and all the data lines */
 						function = "lcd";
 						groups =
 						"lcdvsi0_a_1", /* VSI0 for LCD */
 						"lcd_d0_d7_a_1", /* Data lines */
 						"lcd_d8_d11_a_1", /* TV-out */
-						"lcdaclk_b_1", /* Clock line for TV-out */
 						"lcdvsi1_a_1"; /* VSI1 for HDMI */
+					};
+					default_mux2 {
+						function = "lcda";
+						groups =
+						"lcdaclk_b_1"; /* Clock line for TV-out */
 					};
 					default_cfg1 {
 						pins =

arch/arm/boot/dts/ste-href.dtsi

···
 
 / {
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x20000000>;
 	};
 

arch/arm/boot/dts/ste-hrefprev60.dtsi

···
 			};
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			/*
 			 * On the first generation boards, this SSP/SPI port was connected
 			 * to the AB8500.

arch/arm/boot/dts/ste-snowball.dts

···
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x20000000>;
 	};
 
···
 			pinctrl-1 = <&i2c3_sleep_mode>;
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&ssp0_snowball_mode>;
 		};

arch/arm/boot/dts/ste-u300.dts

···
 			dma-names = "rx";
 		};
 
-		spi: ssp@c0006000 {
+		spi: spi@c0006000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0xc0006000 0x1000>;
 			interrupt-parent = <&vica>;