Pull scheduler fix from Borislav Petkov:

- Do not pull tasks to the local scheduling group if its average load
is higher than the average system load

* tag 'sched_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix imbalance overflow

Pull x86 fix from Borislav Petkov:

- Drop __init annotation from two rtc functions which get called after
boot is done, in order to prevent a crash

* tag 'x86_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/rtc: Remove __init for runtime functions

When local group is fully busy but its average load is above system load,
computing the imbalance will overflow and local group is not the best
target for pulling this load.

Fixes: 0b0695f2b34a ("sched/fair: Rework load_balance()")
Reported-by: Tingjia Cao <tjcao980311@gmail.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Tingjia Cao <tjcao980311@gmail.com>
Link: https://lore.kernel.org/lkml/CABcWv9_DAhVBOq2=W=2ypKE9dKM5s2DvoV8-U0+GDwwuKZ89jQ@mail.gmail.com/T/

Pull powerpc fix from Michael Ellerman:

- A fix for NUMA distance handling in the pseries SCM (pmem) driver.

Thanks to Aneesh Kumar K.V.

* tag 'powerpc-6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Update the NUMA distance table for the target node

set_rtc_noop(), get_rtc_noop() are after booting, therefore their __init
annotation is wrong.

A crash was observed on an x86 platform where CMOS RTC is unused and
disabled via device tree. set_rtc_noop() was invoked from ntp:
sync_hw_clock(), although CONFIG_RTC_SYSTOHC=n, however sync_cmos_clock()
doesn't honour that.

Workqueue: events_power_efficient sync_hw_clock
RIP: 0010:set_rtc_noop
Call Trace:
update_persistent_clock64
sync_hw_clock

Fix this by dropping the __init annotation from set/get_rtc_noop().

Fixes: c311ed6183f4 ("x86/init: Allow DT configured systems to disable RTC at boot time")
Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/59f7ceb1-446b-1d3d-0bc8-1f0ee94b1e18@nokia.com

Pull Kbuild fixes from Masahiro Yamada:

- Drop debug info from purgatory objects again

- Document that kernel.org provides prebuilt LLVM toolchains

- Give up handling untracked files for source package builds

- Avoid creating corrupted cpio when KBUILD_BUILD_TIMESTAMP is given
with a pre-epoch data.

- Change panic_show_mem() to a macro to handle variable-length argument

- Compress tarballs on-the-fly again

* tag 'kbuild-fixes-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: do not create intermediate *.tar for tar packages
kbuild: do not create intermediate *.tar for source tarballs
kbuild: merge cmd_archive_linux and cmd_archive_perf
init/initramfs: Fix argument forwarding to panic() in panic_show_mem()
initramfs: Check negative timestamp to prevent broken cpio archive
kbuild: give up untracked files for source package builds
Documentation/llvm: Add a note about prebuilt kernel.org toolchains
purgatory: fix disabling debug info

Platform device helper routines won't update the NUMA distance table
while creating a platform device, even if the device is present on a
NUMA node that doesn't have memory or CPU. This is especially true for
pmem devices. If the target node of the pmem device is not online, we
find the nearest online node to the device and associate the pmem device
with that online node. To find the nearest online node, we should have
the numa distance table updated correctly. Update the distance
information during the device probe.

For a papr scm device on NUMA node 3 distance_lookup_table value for
distance_ref_points_depth = 2 before and after fix is below:

Before fix:
node 3 distance depth 0 - 0
node 3 distance depth 1 - 0
node 4 distance depth 0 - 4
node 4 distance depth 1 - 2
node 5 distance depth 0 - 5
node 5 distance depth 1 - 1

After fix
node 3 distance depth 0 - 3
node 3 distance depth 1 - 1
node 4 distance depth 0 - 4
node 4 distance depth 1 - 2
node 5 distance depth 0 - 5
node 5 distance depth 1 - 1

Without the fix, the nearest numa node to the pmem device (NUMA node 3)
will be picked as 4. After the fix, we get the correct numa node which
is 5.

Fixes: da1115fdbd6e ("powerpc/nvdimm: Pick nearby online node if the device node is not online")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230404041433.1781804-1-aneesh.kumar@linux.ibm.com

Pull perf fixes from Borislav Petkov:

- Fix "same task" check when redirecting event output

- Do not wait unconditionally for RCU on the event migration path if
there are no events to migrate

* tag 'perf_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix the same task check in perf_event_set_output
perf: Optimize perf_pmu_migrate_context()

Pull ksmbd server fix from Steve French:
"smb311 server preauth integrity negotiate context parsing fix (check
for out of bounds access)"

* tag '6.3-rc6-ksmbd-server-fix' of git://git.samba.org/ksmbd:
ksmbd: avoid out of bounds access in decode_preauth_ctxt()

Commit 05e96e96a315 ("kbuild: use git-archive for source package
creation") split the compression as a separate step to factor out
the common build rules.

With the previous commit, we got back to the situation where source
tarballs are compressed on-the-fly.
There is no reason to keep the separate compression rules.

Generate the comressed tar packages directly.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>

The hypervisor supports user-mode NX from Power10.

pseries_vas_dlpar_cpu() is called from lparcfg_write() to update VAS
windows for DLPAR event in shared processor mode and the kernel gets
-ENOTSUPP for HCALLs if the user-mode NX is not supported. The current
VAS implementation also supports only with Radix page tables. Whereas in
dedicated processor mode, pseries_vas_notifier() is registered only if
the copy/paste feature is enabled. So instead of displaying HCALL error
messages, update VAS capabilities if the copy/paste feature is
available.

This patch ignores updating VAS capabilities in pseries_vas_dlpar_cpu()
and returns success if the copy/paste feature is not enabled. Then
lparcfg_write() completes the processor DLPAR operations without any
failures.

Fixes: 2147783d6bf0 ("powerpc/pseries: Use lparcfg to reconfig VAS windows for DLPAR CPU")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1d0e727e7dbd9a28627ef08ca9df9c86a50175e2.camel@linux.ibm.com

Pull x86 fixes from Borislav Petkov:

- Add a new Intel Arrow Lake CPU model number

- Fix a confusion about how to check the version of the ACPI spec which
supports a "online capable" bit in the MADT table which lead to a
bunch of boot breakages with Zen1 systems and VMs

* tag 'x86_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add model number for Intel Arrow Lake processor
x86/acpi/boot: Correct acpi_is_processor_usable() check
x86/ACPI/boot: Use FADT version to check support for online capable

The same task check in perf_event_set_output has some potential issues
for some usages.

For the current perf code, there is a problem if using of
perf_event_open() to have multiple samples getting into the same mmap’d
memory when they are both attached to the same process.
https://lore.kernel.org/all/92645262-D319-4068-9C44-2409EF44888E@gmail.com/
Because the event->ctx is not ready when the perf_event_set_output() is
invoked in the perf_event_open().

Besides the above issue, before the commit bd2756811766 ("perf: Rewrite
core context handling"), perf record can errors out when sampling with
a hardware event and a software event as below.
$ perf record -e cycles,dummy --per-thread ls
failed to mmap with 22 (Invalid argument)
That's because that prior to the commit a hardware event and a software
event are from different task context.

The problem should be a long time issue since commit c3f00c70276d
("perk: Separate find_get_context() from event initialization").

The task struct is stored in the event->hw.target for each per-thread
event. It is a more reliable way to determine whether two events are
attached to the same task.

The event->hw.target was also introduced several years ago by the
commit 50f16a8bf9d7 ("perf: Remove type specific target pointers"). It
can not only be used to fix the issue with the current code, but also
back port to fix the issues with an older kernel.

Note: The event->hw.target was introduced later than commit
c3f00c70276d. The patch may cannot be applied between the commit
c3f00c70276d and commit 50f16a8bf9d7. Anybody that wants to back-port
this at that period may have to find other solutions.

Fixes: c3f00c70276d ("perf: Separate find_get_context() from event initialization")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lkml.kernel.org/r/20230322202449.512091-1-kan.liang@linux.intel.com

Pull cifs fix from Steve French:
"Small client fix for better checking for smb311 negotiate context
overflows, also marked for stable"

* tag '6.3-rc6-smb311-client-negcontext-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix negotiate context parsing