Pull x86 fix from Borislav Petkov:
"A single change adding Dave Hansen to our maintainers team"

* tag 'x86_urgent_for_v5.15_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add Dave Hansen to the x86 maintainer team

Pull ksmbd fixes from Steve French:
"Ten fixes for the ksmbd kernel server, for improved security and
additional buffer overflow checks:

- a security improvement to session establishment to reduce the
possibility of dictionary attacks

- fix to ensure that maximum i/o size negotiated in the protocol is
not less than 64K and not more than 8MB to better match expected
behavior

- fix for crediting (flow control) important to properly verify that
sufficient credits are available for the requested operation

- seven additional buffer overflow, buffer validation checks"

* tag '5.15-rc6-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add buffer validation in session setup
ksmbd: throttle session setup failures to avoid dictionary attacks
ksmbd: validate OutputBufferLength of QUERY_DIR, QUERY_INFO, IOCTL requests
ksmbd: validate credit charge after validating SMB2 PDU body size
ksmbd: add buffer validation for smb direct
ksmbd: limit read/write/trans buffer size not to exceed 8MB
ksmbd: validate compound response buffer
ksmbd: fix potencial 32bit overflow from data area check in smb2_write
ksmbd: improve credits management
ksmbd: add validation in smb2_ioctl

Dave is already listed as x86/mm maintainer, has a profund knowledge
of the x86 architecture in general and a good taste in terms of kernel
programming in general.

Add him as a full x86 maintainer with all rights and duties.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/87zgr3flq7.ffs@tglx

Pull SCSI fixes from James Bottomley:
"Ten fixes, seven of which are in drivers.

The core fixes are one to fix a potential crash on resume, one to sort
out our reference count releases to avoid releasing in-use modules and
one to adjust the cmd per lun calculation to avoid an overflow in
hyper-v"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-pci: Force a full restore after suspend-to-disk
scsi: qla2xxx: Fix unmap of already freed sgl
scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()
scsi: qla2xxx: Return -ENOMEM if kzalloc() fails
scsi: sd: Fix crashes in sd_resume_runtime()
scsi: mpi3mr: Fix duplicate device entries when scanning through sysfs
scsi: core: Put LLD module refcnt after SCSI device is released
scsi: storvsc: Fix validation for unsolicited incoming packets
scsi: iscsi: Fix set_param() handling
scsi: core: Fix shost->cmd_per_lun calculation in scsi_add_host_with_dma()

Make sure the security buffer's length/offset are valid with regards to
the packet length.

Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull block fixes from Jens Axboe:
"Fix for the cgroup code not ussing irq safe stats updates, and one fix
for an error handling condition in add_partition()"

* tag 'block-5.15-2021-10-22' of git://git.kernel.dk/linux-block:
block: fix incorrect references to disk objects
blk-cgroup: blk_cgroup_bio_start() should use irq-safe operations on blkg->iostat_cpu

Implement the ->restore() PM operation and set the link to off, which will
force a full reset and restore. This ensures that Host Performance Booster
is reset after suspend-to-disk.

The Host Performance Booster feature caches logical-to-physical mapping
information in the host memory. After suspend-to-disk, such information is
not valid, so a full reset and restore is needed.

A full reset and restore is done if the SPM level is 5 or 6, but not for
other SPM levels, so this change fixes those cases.

A full reset and restore also restores base address registers, so that code
is removed.

Link: https://lore.kernel.org/r/20211018151004.284200-2-adrian.hunter@intel.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

To avoid dictionary attacks (repeated session setups rapidly sent) to
connect to server, ksmbd make a delay of a 5 seconds on session setup
failure to make it harder to send enough random connection requests
to break into a server if a user insert the wrong password 10 times
in a row.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull libata fixes from Damien Le Moal:
"Two fixes for this cycle:

- Fix a null pointer dereference in ahci-platform driver (from Hai)

- Fix uninitialized variables in pata_legacy driver (from Dan)"

* tag 'libata-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators()
pata_legacy: fix a couple uninitialized variable bugs

Pull io_uring fixes from Jens Axboe:
"Two fixes for the max workers limit API that was introduced this
series: one fix for an issue with that code, and one fixing a linked
timeout regression in this series"

* tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-block:
io_uring: apply worker limits to previous users
io_uring: fix ltimeout unprep
io_uring: apply max_workers limit to all future users
io-wq: max_worker fixes

When adding partitions to the disk, the reference count of the disk
object is increased. then alloc partition device and called
device_add(), if the device_add() return error, the reference
count of the disk object will be reduced twice, at put_device(pdev)
and put_disk(disk). this leads to the end of the object's life cycle
prematurely, and trigger following calltrace.

__init_work+0x2d/0x50 kernel/workqueue.c:519
synchronize_rcu_expedited+0x3af/0x650 kernel/rcu/tree_exp.h:847
bdi_remove_from_list mm/backing-dev.c:938 [inline]
bdi_unregister+0x17f/0x5c0 mm/backing-dev.c:946
release_bdi+0xa1/0xc0 mm/backing-dev.c:968
kref_put include/linux/kref.h:65 [inline]
bdi_put+0x72/0xa0 mm/backing-dev.c:976
bdev_free_inode+0x11e/0x220 block/bdev.c:408
i_callback+0x3f/0x70 fs/inode.c:226
rcu_do_batch kernel/rcu/tree.c:2508 [inline]
rcu_core+0x76d/0x16c0 kernel/rcu/tree.c:2743
__do_softirq+0x1d7/0x93b kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0xf2/0x130 kernel/softirq.c:648
sysvec_apic_timer_interrupt+0x93/0xc0

making disk is NULL when calling put_disk().

Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211018103422.2043-1-qiang.zhang1211@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The sgl is freed in the target stack in target_release_cmd_kref() before
calling qlt_free_cmd() but there is an unmap of sgl in qlt_free_cmd() that
causes a panic if sgl is not yet DMA unmapped:

NIP dma_direct_unmap_sg+0xdc/0x180
LR dma_direct_unmap_sg+0xc8/0x180
Call Trace:
ql_dbg_prefix+0x68/0xc0 [qla2xxx] (unreliable)
dma_unmap_sg_attrs+0x54/0xf0
qlt_unmap_sg.part.19+0x54/0x1c0 [qla2xxx]
qlt_free_cmd+0x124/0x1d0 [qla2xxx]
tcm_qla2xxx_release_cmd+0x4c/0xa0 [tcm_qla2xxx]
target_put_sess_cmd+0x198/0x370 [target_core_mod]
transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
tcm_qla2xxx_complete_free+0x6c/0x90 [tcm_qla2xxx]

The sgl may be left unmapped in error cases of response sending. For
instance, qlt_rdy_to_xfer() maps sgl and exits when session is being
deleted keeping the sgl mapped.

This patch removes use-after-free of the sgl and ensures that the sgl is
unmapped for any command that was not sent to firmware.

Link: https://lore.kernel.org/r/20211018122650.11846-1-d.bogdanov@yadro.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>