This reverts commit 45e34c8af58f23db4474e2bfe79183efec09a18b, and the
two subsequent fixes to it:

3f874c9b2aae ("x86/smp: Don't send INIT to non-present and non-booted CPUs")
b1472a60a584 ("x86/smp: Don't send INIT to boot CPU")

because it seems to result in hung machines at shutdown. Particularly
some Dell machines, but Thomas says

"The rest seems to be Lenovo and Sony with Alderlake/Raptorlake CPUs -
at least that's what I could figure out from the various bug reports.

I don't know which CPUs the DELL machines have, so I can't say it's a
pattern.

I agree with the revert for now"

Ashok Raj chimes in:

"There was a report (probably this same one), and it turns out it was a
bug in the BIOS SMI handler.

The client BIOS's were waiting for the lowest APICID to be the SMI
rendevous master. If this is MeteorLake, the BSP wasn't the one with
the lowest APIC and it triped here.

The BIOS change is also being pushed to others for assimilation :)

Server BIOS's had this correctly for a while now"

and it does look likely to be some bad interaction between SMI and the
non-BSP cores having put into INIT (and thus unresponsive until reset).

Link: https://bbs.archlinux.org/viewtopic.php?pid=2124429
Link: https://www.reddit.com/r/openSUSE/comments/16qq99b/tumbleweed_shutdown_did_not_finish_completely/
Link: https://forum.artixlinux.org/index.php/topic,5997.0.html
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2241279
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 295525e29a5b ("virtio_net: merge dma operations when filling
mergeable buffers") unmaps the buffer with DMA_ATTR_SKIP_CPU_SYNC when
the dma->ref is zero. We do that with DMA_ATTR_SKIP_CPU_SYNC, because we
do not want to do the sync for the entire page_frag. But that misses the
sync for the current area.

This patch does cpu sync regardless of whether the ref is zero or not.

Fixes: 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers")
Reported-by: Michael Roth <michael.roth@amd.com>
Closes: http://lore.kernel.org/all/20230926130451.axgodaa6tvwqs3ut@amd.com
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB and Thunderbolt driver fixes for 6.6-rc6 to resolve
a number of small reported issues. Included in here are:

- thunderbolt driver fixes

- xhci driver fixes

- cdns3 driver fixes

- musb driver fixes

- a number of typec driver fixes

- a few other small driver fixes

All of these have been in linux-next with no reported issues"

* tag 'usb-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
usb: typec: ucsi: Use GET_CAPABILITY attributes data to set power supply scope
usb: typec: ucsi: Fix missing link removal
usb: typec: altmodes/displayport: Signal hpd low when exiting mode
xhci: Preserve RsvdP bits in ERSTBA register correctly
xhci: Clear EHB bit only at end of interrupt handler
xhci: track port suspend state correctly in unsuccessful resume cases
usb: xhci: xhci-ring: Use sysdev for mapping bounce buffer
usb: typec: ucsi: Clear EVENT_PENDING bit if ucsi_send_command fails
usb: misc: onboard_hub: add support for Microchip USB2412 USB 2.0 hub
usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
usb: cdns3: Modify the return value of cdns_set_active () to void when CONFIG_PM_SLEEP is disabled
usb: dwc3: Soft reset phy on probe for host
usb: hub: Guard against accesses to uninitialized BOS descriptors
usb: typec: qcom: Update the logic of regulator enable and disable
usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call
usb: musb: Get the musb_qh poniter after musb_giveback
usb: musb: Modify the "HWVers" register address
usb: cdnsp: Fixes issue with dequeuing not queued requests
thunderbolt: Restart XDomain discovery handshake after failure
thunderbolt: Correct TMU mode initialization from hardware
...

Pull tty/serial driver fixes from Greg KH:
"Here are some small tty/serial driver fixes for 6.6-rc6 that resolve
some reported issues. Included in here are:

- serial core pm runtime fix for issue reported by many

- 8250_omap driver fix

- rs485 spinlock fix for reported problem

- ams-delta bugfix for previous tty api changes in -rc1 that missed
this driver that never seems to get built in any test systems

All of these have been in linux-next for over a week with no reported
problems"

* tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
ASoC: ti: ams-delta: Fix cx81801_receive() argument types
serial: core: Fix checks for tx runtime PM state
serial: 8250_omap: Fix errors with no_console_suspend
serial: Reduce spinlocked portion of uart_rs485_config()

On some OEM systems, adding a W7900 dGPU triggers RAS errors and hangs
at a black screen on startup. This issue occurs only if `ucsi_acpi` has
loaded before `amdgpu` has loaded. The reason for this failure is that
`amdgpu` uses power_supply_is_system_supplied() to determine if running
on AC or DC power at startup. If this value is reported incorrectly the
dGPU will also be programmed incorrectly and trigger errors.

power_supply_is_system_supplied() reports the wrong value because UCSI
power supplies provided as part of the system don't properly report the
scope as "DEVICE" scope (not powering the system).

In order to fix this issue check the capabilities reported from the UCSI
power supply to ensure that it supports charging a battery and that it can
be powered by AC. Mark the scope accordingly.

Cc: stable@vger.kernel.org
Fixes: a7fbfd44c020 ("usb: typec: ucsi: Mark dGPUs as DEVICE scope")
Link: https://www.intel.com/content/www/us/en/products/docs/io/universal-serial-bus/usb-type-c-ucsi-spec.html p28
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231009184643.129986-1-mario.limonciello@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull char/misc driver fixes from Greg KH:
"Here is a small set of char/misc and other smaller driver subsystem
fixes for 6.6-rc6. Included in here are:

- lots of iio driver fixes

- binder memory leak fix

- mcb driver fixes

- counter driver fixes

- firmware loader documentation fix

- documentation update for embargoed hardware issues

All of these have been in linux-next for over a week with no reported
issues"

* tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
binder: fix memory leaks of spam and pending work
firmware_loader: Update contact emails for ABI docs
Documentation: embargoed-hardware-issues.rst: Clarify prenotifaction
mcb: remove is_added flag from mcb_device struct
coresight: tmc-etr: Disable warnings for allocation failures
coresight: Fix run time warnings while reusing ETR buffer
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
...

Since types of arguments accepted by tty_ldis_ops::receive_buf() have
changed, the driver no longer builds.

.../linux/sound/soc/ti/ams-delta.c:403:24: error: initialization of 'void (*)(struct tty_struct *, const u8 *, const u8 *, size_t)' {aka 'void (*)(struct tty_struct *, const unsigned char *, const unsigned char *, unsigned int)'} from incompatible pointer type 'void (*)(struct tty_struct *, const u8 *, const char *, int)' {aka 'void (*)(struct tty_struct *, const unsigned char *, const char *, int)'} [-Werror=incompatible-pointer-types]
403 | .receive_buf = cx81801_receive,

Fix it.

Fixes: e8161447bb0c ("tty: make tty_ldisc_ops::*buf*() hooks operate on size_t")
Fixes: 892bc209f250 ("tty: use u8 for flags")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20231007213820.376360-1-jmkrzyszt@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The link between the partner device and its USB Power
Delivery instance was never removed which prevented the
device from being released. Removing the link always when
the partner is unregistered.

Fixes: b04e1747fbcc ("usb: typec: ucsi: Register USB Power Delivery Capabilities")
Cc: stable <stable@kernel.org>
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Closes: https://lore.kernel.org/linux-usb/ZSUMXdw9nanHtnw2@kuha.fi.intel.com/
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231010141749.3912016-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull overlayfs fixes from Amir Goldstein:

- Various fixes for regressions due to conversion to new mount
api in v6.5

- Disable a new mount option syntax (append lowerdir) that was
added in v6.5 because we plan to add a different lowerdir
append syntax in v6.7

* tag 'ovl-fixes-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: temporarily disable appending lowedirs
ovl: fix regression in showing lowerdir mount option
ovl: fix regression in parsing of mount options with escaped comma
fs: factor out vfs_parse_monolithic_sep() helper

Jonathan writes:

1st set of IIO fixes for 6.6

Note last minute rebase to fix up a stale Fixes tag. All patches have been
in Linux-next for some time.

adi,ad3552r
- Fix swapped device IDs for the two parts that are supported.
adi,ad7192
- Use the right reference voltage source.
adi,ad7292
- Fix additionalProperties to be false, not true.
adi,ad74413
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
adi,admv1013
- Fix up some corner cases for the mixer vgate register value.
bosch,bmp280
- Fix a null pointer dereference caused by a wrong boolean operator.
bosch,bno055
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
freescale,imx8eqxp
- Fix some wrong register addresses.
google,cros_ec
- Fix a use after free if very badly timed buffer disable occurs by
holding the device in buffered mode.
infineon,dps310
- Expand a timeout so we don't hit it on working parts.
meas,m5611
- Allow for a ROM CRC of 0 as it is a valid value and there are devices
out there where it happens.
murata,irsd200
- Make sure the buffer used to build up the scan is large enough to take
the timestamp.
rohm,bu27010 binding
- Add a missing required vdd-supply
vishay,vcnl4000
- Don't power down chip in wrong place.

* tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs

Maximilian reported that surface_serial_hub serdev tx does not work during
system suspend. During system suspend, runtime PM gets disabled in
__device_suspend_late(), and tx is unable to wake-up the serial core port
device that we use to check if tx is safe to start. Johan summarized the
regression noting that serdev tx no longer always works as earlier when the
serdev device is runtime PM active.

The serdev device and the serial core controller devices are siblings of
the serial port hardware device. The runtime PM usage count from serdev
device does not propagate to the serial core device siblings, it only
propagates to the parent.

In addition to the tx issue for suspend, testing for the serial core port
device can cause an unnecessary delay in enabling tx while waiting for the
serial core port device to wake-up. The serial core port device wake-up is
only needed to flush pending tx when the serial port hardware device was
in runtime PM suspended state.

To fix the regression, we need to check the runtime PM state of the parent
serial port hardware device for tx instead of the serial core port device.

As the serial port device drivers may or may not implement runtime PM, we
need to also add a check for pm_runtime_enabled().

Reported-by: Maximilian Luz <luzmaximilian@gmail.com>
Cc: stable <stable@kernel.org>
Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231005075644.25936-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Upon receiving an ACK for a sent EXIT_MODE message, the DisplayPort
driver currently resets the status and configuration of the port partner.
The hpd signal is not updated despite being part of the status, so the
Display stack can still transmit video despite typec_altmode_exit placing
the lanes in a Safe State.

Set hpd to low when a sent EXIT_MODE message is ACK'ed.

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231009210057.3773877-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull powerpc fixes from Michael Ellerman:

- Fix softlockup/crash when using hcall tracing

- Fix pte_access_permitted() for PAGE_NONE on 8xx

- Fix inverted pte_young() test in __ptep_test_and_clear_young()
on 64-bit BookE

- Fix unhandled math emulation exception on 85xx

- Fix kernel crash on syscall return on 476

Thanks to Athira Rajeev, Christophe Leroy, Eddie James, and Naveen N
Rao.

* tag 'powerpc-6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/47x: Fix 47x syscall return crash
powerpc/85xx: Fix math emulation exception
powerpc/64e: Fix wrong test in __ptep_test_and_clear_young()
powerpc/8xx: Fix pte_access_permitted() for PAGE_NONE
powerpc/pseries: Remove unused r0 in the hcall tracing code
powerpc/pseries: Fix STK_PARAM access in the hcall tracing code

Kernel v6.5 converted overlayfs to new mount api.
As an added bonus, it also added a feature to allow appending lowerdirs
using lowerdir=:/lower2,lowerdir=::/data3 syntax.

This new syntax has raised some concerns regarding escaping of colons.
We decided to try and disable this syntax, which hasn't been in the wild
for so long and introduce it again in 6.7 using explicit mount options
lowerdir+=/lower2,datadir+=/data3.

Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/r/CAJfpegsr3A4YgF2YBevWa6n3=AcP7hNndG6EPMu3ncvV-AM71A@mail.gmail.com/
Fixes: b36a5780cb44 ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>

A transaction complete work is allocated and queued for each
transaction. Under certain conditions the work->type might be marked as
BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT to notify userspace about
potential spamming threads or as BINDER_WORK_TRANSACTION_PENDING when
the target is currently frozen.

However, these work types are not being handled in binder_release_work()
so they will leak during a cleanup. This was reported by syzkaller with
the following kmemleak dump:

BUG: memory leak
unreferenced object 0xffff88810e2d6de0 (size 32):
comm "syz-executor338", pid 5046, jiffies 4294968230 (age 13.590s)
hex dump (first 32 bytes):
e0 6d 2d 0e 81 88 ff ff e0 6d 2d 0e 81 88 ff ff .m-......m-.....
04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81573b75>] kmalloc_trace+0x25/0x90 mm/slab_common.c:1114
[<ffffffff83d41873>] kmalloc include/linux/slab.h:599 [inline]
[<ffffffff83d41873>] kzalloc include/linux/slab.h:720 [inline]
[<ffffffff83d41873>] binder_transaction+0x573/0x4050 drivers/android/binder.c:3152
[<ffffffff83d45a05>] binder_thread_write+0x6b5/0x1860 drivers/android/binder.c:4010
[<ffffffff83d486dc>] binder_ioctl_write_read drivers/android/binder.c:5066 [inline]
[<ffffffff83d486dc>] binder_ioctl+0x1b2c/0x3cf0 drivers/android/binder.c:5352
[<ffffffff816b25f2>] vfs_ioctl fs/ioctl.c:51 [inline]
[<ffffffff816b25f2>] __do_sys_ioctl fs/ioctl.c:871 [inline]
[<ffffffff816b25f2>] __se_sys_ioctl fs/ioctl.c:857 [inline]
[<ffffffff816b25f2>] __x64_sys_ioctl+0xf2/0x140 fs/ioctl.c:857
[<ffffffff84b30008>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84b30008>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
[<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fix the leaks by kfreeing these work types in binder_release_work() and
handle them as a BINDER_WORK_TRANSACTION_COMPLETE cleanup.

Cc: stable@vger.kernel.org
Fixes: 0567461a7a6e ("binder: return pending info for frozen async txns")
Fixes: a7dc1e6f99df ("binder: tell userspace to dump current backtrace when detected oneway spamming")
Reported-by: syzbot+7f10c1653e35933c0f1e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7f10c1653e35933c0f1e
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20230922175138.230331-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ms5611 driver falsely rejects lots of MS5607-02BA03-50 chips
with "PROM integrity check failed" because it doesn't accept a prom crc
value of zero as legitimate.

According to the datasheet for this chip (and the manufacturer's
application note about the PROM CRC), none of the possible values for the
CRC are excluded - but the current code in ms5611_prom_is_valid() ends with

return crc_orig != 0x0000 && crc == crc_orig

Discussed with the driver author (Tomasz Duszynski) and he indicated that
at that time (2015) he was dealing with some faulty chip samples which
returned blank data under some circumstances and/or followed example code
which indicated CRC zero being bad.

As far as I can tell this exception should not be applied anymore; We've
got a few hundred custom boards here with this chip where large numbers
of the prom have a legitimate CRC value 0, and do work fine, but which the
current driver code wrongly rejects.

Signed-off-by: Alexander Zangerl <az@breathe-safe.com>
Fixes: c0644160a8b5 ("iio: pressure: add support for MS5611 pressure and temperature sensor")
Link: https://lore.kernel.org/r/2535-1695168070.831792@Ze3y.dhYT.s3fx
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

We now get errors on system suspend if no_console_suspend is set as
reported by Thomas. The errors started with commit 20a41a62618d ("serial:
8250_omap: Use force_suspend and resume for system suspend").

Let's fix the issue by checking for console_suspend_enabled in the system
suspend and resume path.

Note that with this fix the checks for console_suspend_enabled in
omap8250_runtime_suspend() become useless. We now keep runtime PM usage
count for an attached kernel console starting with commit bedb404e91bb
("serial: 8250_port: Don't use power management for kernel console").

Fixes: 20a41a62618d ("serial: 8250_omap: Use force_suspend and resume for system suspend")
Cc: stable <stable@kernel.org>
Cc: Udit Kumar <u-kumar1@ti.com>
Reported-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230926061319.15140-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci_add_interrupter() erroneously preserves only the lowest 4 bits when
writing the ERSTBA register, not the lowest 6 bits. Fix it.

Migrate the ERST_BASE_RSVDP macro to the modern GENMASK_ULL() syntax to
avoid a u64 cast.

This was previously fixed by commit 8c1cbec9db1a ("xhci: fix event ring
segment table related masks and variables in header"), but immediately
undone by commit b17a57f89f69 ("xhci: Refactor interrupter code for
initial multi interrupter support.").

Fixes: b17a57f89f69 ("xhci: Refactor interrupter code for initial multi interrupter support.")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.3+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230915143108.1532163-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull CPU hotplug fix from Ingo Molnar:
"Fix a Longsoon build warning by harmonizing the
arch_[un]register_cpu() prototypes between architectures"

* tag 'smp-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu-hotplug: Provide prototypes for arch CPU registration

Eddie reported that newer kernels were crashing during boot on his 476
FSP2 system:

kernel tried to execute user page (b7ee2000) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0xb7ee2000
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K FSP-2
Modules linked in:
CPU: 0 PID: 61 Comm: mount Not tainted 6.1.55-d23900f.ppcnf-fsp2 #1
Hardware name: ibm,fsp2 476fpe 0x7ff520c0 FSP-2
NIP:  b7ee2000 LR: 8c008000 CTR: 00000000
REGS: bffebd83 TRAP: 0400   Not tainted (6.1.55-d23900f.ppcnf-fs p2)
MSR:  00000030 <IR,DR>  CR: 00001000  XER: 20000000
GPR00: c00110ac bffebe63 bffebe7e bffebe88 8c008000 00001000 00000d12 b7ee2000
GPR08: 00000033 00000000 00000000 c139df10 48224824 1016c314 10160000 00000000
GPR16: 10160000 10160000 00000008 00000000 10160000 00000000 10160000 1017f5b0
GPR24: 1017fa50 1017f4f0 1017fa50 1017f740 1017f630 00000000 00000000 1017f4f0
NIP [b7ee2000] 0xb7ee2000
LR [8c008000] 0x8c008000
Call Trace:
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
---[ end trace 0000000000000000 ]---

The problem is in ret_from_syscall where the check for
icache_44x_need_flush is done. When the flush is needed the code jumps
out-of-line to do the flush, and then intends to jump back to continue
the syscall return.

However the branch back to label 1b doesn't return to the correct
location, instead branching back just prior to the return to userspace,
causing bogus register values to be used by the rfi.

The breakage was introduced by commit 6f76a01173cc
("powerpc/syscall: implement system call entry/exit logic in C for PPC32") which
inadvertently removed the "1" label and reused it elsewhere.

Fix it by adding named local labels in the correct locations. Note that
the return label needs to be outside the ifdef so that CONFIG_PPC_47x=n
compiles.

Fixes: 6f76a01173cc ("powerpc/syscall: implement system call entry/exit logic in C for PPC32")
Cc: stable@vger.kernel.org # v5.12+
Reported-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/linuxppc-dev/fdaadc46-7476-9237-e104-1d2168526e72@linux.ibm.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://msgid.link/20231010114750.847794-1-mpe@ellerman.id.au

Before commit b36a5780cb44 ("ovl: modify layer parameter parsing"),
spaces and commas in lowerdir mount option value used to be escaped using
seq_show_option().

In current upstream, when lowerdir value has a space, it is not escaped
in /proc/mounts, e.g.:

none /mnt overlay rw,relatime,lowerdir=l l,upperdir=u,workdir=w 0 0

which results in broken output of the mount utility:

none on /mnt type overlay (rw,relatime,lowerdir=l)

Store the original lowerdir mount options before unescaping and show
them using the same escaping used for seq_show_option() in addition to
escaping the colon separator character.

Fixes: b36a5780cb44 ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>

Update the firmware_loader documentation and corresponding section
in the MAINTAINERs file with a new email address.

Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20230929151326.311959-1-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"additionalProperties: true" is only for incomplete schemas such as bus
child nodes in a bus's schema. That doesn't apply to the "channel" nodes
in the adi,ad7292 binding, so fix additionalProperties to be false.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/20230926164357.100325-1-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Commit 44b27aec9d96 ("serial: core, 8250: set RS485 termination GPIO in
serial core") enabled support for RS485 termination GPIOs behind i2c
expanders by setting the GPIO outside of the critical section protected
by the port spinlock. Access to the i2c expander may sleep, which
caused a splat with the port spinlock held.

Commit 7c7f9bc986e6 ("serial: Deassert Transmit Enable on probe in
driver-specific way") erroneously regressed that by spinlocking the
GPIO manipulation again.

Fix by moving uart_rs485_config() (the function manipulating the GPIO)
outside of the spinlocked section and acquiring the spinlock inside of
uart_rs485_config() for the invocation of ->rs485_config() only.

This gets us one step closer to pushing the spinlock down into the
->rs485_config() callbacks which actually need it. (Some callbacks
do not want to be spinlocked because they perform sleepable register
accesses, see e.g. sc16is7xx_config_rs485().)

Stack trace for posterity:

Voluntary context switch within RCU read-side critical section!
WARNING: CPU: 0 PID: 56 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch
Call trace:
rcu_note_context_switch
__schedule
schedule
schedule_timeout
wait_for_completion_timeout
bcm2835_i2c_xfer
__i2c_transfer
i2c_transfer
i2c_transfer_buffer_flags
regmap_i2c_write
_regmap_raw_write_impl
_regmap_bus_raw_write
_regmap_write
_regmap_update_bits
regmap_update_bits_base
pca953x_gpio_set_value
gpiod_set_raw_value_commit
gpiod_set_value_nocheck
gpiod_set_value_cansleep
uart_rs485_config
uart_add_one_port
pl011_register_port
pl011_probe

Fixes: 7c7f9bc986e6 ("serial: Deassert Transmit Enable on probe in driver-specific way")
Suggested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.1+
Link: https://lore.kernel.org/r/f3a35967c28b32f3c6432d0aa5936e6a9908282d.1695307688.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Event Handler Busy bit shall be cleared by software when the Event
Ring is empty. The xHC is thereby informed that it may raise another
interrupt once it has enqueued new events (sec 4.17.2).

However since commit dc0ffbea5729 ("usb: host: xhci: update event ring
dequeue pointer on purpose"), the EHB bit is already cleared after half
a segment has been processed.

As a result, spurious interrupts may occur:

- xhci_irq() processes half a segment, clears EHB, continues processing
remaining events.
- xHC enqueues new events. Because EHB has been cleared, xHC sets
Interrupt Pending bit. Interrupt moderation countdown begins.
- Meanwhile xhci_irq() continues processing events. Interrupt
moderation countdown reaches zero, so an MSI interrupt is signaled.
- xhci_irq() empties the Event Ring, clears EHB again and is done.
- Because an MSI interrupt has been signaled, xhci_irq() is run again.
It discovers there's nothing to do and returns IRQ_NONE.

Avoid by clearing the EHB bit only at the end of xhci_irq().

Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v5.5+
Cc: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230915143108.1532163-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull smb server fixes from Steve French:

- Fix for possible double free in RPC read

- Add additional check to clarify smb2_open path and quiet Coverity

- Fix incorrect error rsp in a compounding path

- Fix to properly fail open of file with pending delete on close

* tag '6.6-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix potential double free on smb2_read_pipe() error path
ksmbd: fix Null pointer dereferences in ksmbd_update_fstate()
ksmbd: fix wrong error response status by using set_smb2_rsp_status()
ksmbd: not allow to open file if delelete on close bit is set

Provide common prototypes for arch_register_cpu() and
arch_unregister_cpu(). These are called by acpi_processor.c, with weak
versions, so the prototype for this is already set. It is generally not
necessary for function prototypes to be conditional on preprocessor macros.

Some architectures (e.g. Loongarch) are missing the prototype for this, and
rather than add it to Loongarch's asm/cpu.h, do the job once for everyone.

Since this covers everyone, remove the now unnecessary prototypes in
asm/cpu.h, and therefore remove the 'static' from one of ia64's
arch_register_cpu() definitions.

[ tglx: Bring back the ia64 part and remove the ACPI prototypes ]

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/E1qkoRr-0088Q8-Da@rmk-PC.armlinux.org.uk

Booting mpc85xx_defconfig kernel on QEMU leads to:

Bad trap at PC: fe9bab0, SR: 2d000, vector=800
awk[82]: unhandled trap (5) at 0 nip fe9bab0 lr fe9e01c code 5 in libc-2.27.so[fe5a000+17a000]
awk[82]: code: 3aa00000 3a800010 4bffe03c 9421fff0 7ca62b78 38a00000 93c10008 83c10008
awk[82]: code: 38210010 4bffdec8 9421ffc0 7c0802a6 <fc00048e> d8010008 4815190d 93810030
Trace/breakpoint trap
WARNING: no useful console

This is because allthough CONFIG_MATH_EMULATION is selected,
Exception 800 calls unknown_exception().

Call emulation_assist_interrupt() instead.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/066caa6d9480365da9b8ed83692d7101e10ac5f8.1695657339.git.christophe.leroy@csgroup.eu

Ever since commit 91c77947133f ("ovl: allow filenames with comma"), the
following example was legit overlayfs mount options:

mount -t overlay overlay -o 'lowerdir=/tmp/a\,b/lower' /mnt

The conversion to new mount api moved to using the common helper
generic_parse_monolithic() and discarded the specialized ovl_next_opt()
option separator.

Bring back ovl_next_opt() and use vfs_parse_monolithic_sep() to fix the
regression.

Reported-by: Ryan Hendrickson <ryan.hendrickson@alum.mit.edu>
Closes: https://lore.kernel.org/r/8da307fb-9318-cf78-8a27-ba5c5a0aef6d@alum.mit.edu/
Fixes: 1784fbc2ed9c ("ovl: port to new mount api")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>

There has been a repeated misunderstanding about what the hardware embargo
list is for. Clarify the language in the process so that it is clear
that only fixes are coordinated. There is explicitly no prenotification
process. The list members are also expected to keep total radio silence
during embargoes.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: workflows@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231004004959.work.258-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The avdd and the reference voltage are two different sources but the
reference voltage was assigned according to the avdd supply.

Add vref regulator structure and set the reference voltage according to
the vref supply from the devicetree.

In case vref supply is missing, reference voltage is set according to
the avdd supply for compatibility with old devicetrees.

Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging")
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230924152149.41884-1-alisadariana@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

xhci-hub.c tracks suspended ports in a suspended_port bitfield.
This is checked when responding to a Get_Status(PORT) request to see if a
port in running U0 state was recently resumed, and adds the required
USB_PORT_STAT_C_SUSPEND change bit in those cases.

The suspended_port bit was left uncleared if a device is disconnected
during suspend. The bit remained set even when a new device was connected
and enumerated. The set bit resulted in a incorrect Get_Status(PORT)
response with a bogus USB_PORT_STAT_C_SUSPEND change
bit set once the new device reached U0 link state.

USB_PORT_STAT_C_SUSPEND change bit is only used for USB2 ports, but
xhci-hub keeps track of both USB2 and USB3 suspended ports.

Cc: stable@vger.kernel.org
Reported-by: Wesley Cheng <quic_wcheng@quicinc.com>
Closes: https://lore.kernel.org/linux-usb/d68aa806-b26a-0e43-42fb-b8067325e967@quicinc.com/
Fixes: 1d5810b6923c ("xhci: Rework port suspend structures for limited ports.")
Tested-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230915143108.1532163-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull smb client fixes from Steve French:

- fix caching race with open_cached_dir and laundromat cleanup of
cached dirs (addresses a problem spotted with xfstest run with
directory leases enabled)

- reduce excessive resource usage of laundromat threads

* tag '6.6-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: prevent new fids from being removed by laundromat
smb: client: make laundromat a delayed worker

Fix new smatch warnings:
fs/smb/server/smb2pdu.c:6131 smb2_read_pipe() error: double free of 'rpc_resp'

Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Commit 45201c879469 ("powerpc/nohash: Remove hash related code from
nohash headers.") replaced:

if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
return 0;

By:

if (pte_young(*ptep))
return 0;

But it should be:

if (!pte_young(*ptep))
return 0;

Fix it.

Fixes: 45201c879469 ("powerpc/nohash: Remove hash related code from nohash headers.")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/8bb7f06494e21adada724ede47a4c3d97e879d40.1695659959.git.christophe.leroy@csgroup.eu

Factor out vfs_parse_monolithic_sep() from generic_parse_monolithic(),
so filesystems could use it with a custom option separator callback.

Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>

When calling mcb_bus_add_devices(), both mcb devices and the mcb
bus will attempt to attach a device to a driver because they share
the same bus_type. This causes an issue when trying to cast the
container of the device to mcb_device struct using to_mcb_device(),
leading to a wrong cast when the mcb_bus is added. A crash occurs
when freing the ida resources as the bus numbering of mcb_bus gets
confused with the is_added flag on the mcb_device struct.

The only reason for this cast was to keep an is_added flag on the
mcb_device struct that does not seem necessary. The function
device_attach() handles already bound devices and the mcb subsystem
does nothing special with this is_added flag so remove it completely.

Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device")
Cc: stable <stable@kernel.org>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Co-developed-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com>
Signed-off-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com>
Link: https://lore.kernel.org/r/20230906114901.63174-2-JoseJavier.Rodriguez@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After enabling/disabling interrupts on the vcnl4040 chip the als and/or
ps sensor is powered on or off depending on the interrupt enable bits.
This is made as a last step in write_event_config.

But there is no reason to do this as the runtime PM handles the power
state of the sensors. Interfering with this may impact sensor readings.

Consider the following:
1. Userspace makes sensor data reading which triggers RPM resume
(sensor powered on) and a RPM suspend timeout. The timeout is 2000ms
before RPM suspend powers the sensor off if no new reading is made
within the timeout period.
2. Userspace disables interrupts => powers sensor off
3. Userspace reads sensor data = 0 because sensor is off and the
suspend timeout has not passed. For each new reading made within the
timeout period the timeout is renewed with 2000ms and RPM will not
make a new resume (device was not suspended). So the sensor will
not be powered on.
4. No further userspace reading for 2000ms ends RPM suspend timeout and
triggers suspend (powers off already powered off sensor).

Powering sensor off in (2) makes all consecutive readings made within
2000ms to the previous reading (3) return invalid data.

Skip setting power state when writing new event config.

Fixes: 546676121cb9 ("iio: light: vcnl4000: Add interrupt support for vcnl4040")
Fixes: bc292aaf9cb4 ("iio: light: vcnl4000: add illuminance irq vcnl4040/4200")
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Link: https://lore.kernel.org/r/20230907-vcnl4000-pm-fix-v2-1-298e01f54db4@axis.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Pull Kbuild fixes from Masahiro Yamada:

- Fix the module compression with xz so the in-kernel decompressor
works

- Document a kconfig idiom to express an optional dependency between
modules

- Make modpost, when W=1 is given, detect broken drivers that reference
.exit.* sections

- Remove unused code

* tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: remove stale code for 'source' symlink in packaging scripts
modpost: Don't let "driver"s reference .exit.*
vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros
modpost: add missing else to the "of" check
Documentation: kbuild: explain handling optional dependencies
kbuild: Use CRC32 and a 1MiB dictionary for XZ compressed modules

As mentioned in:
commit 474ed23a6257 ("xhci: align the last trb before link if it is
easily splittable.")

A bounce buffer is utilized for ensuring that transfers that span across
ring segments are aligned to the EP's max packet size. However, the device
that is used to map the DMA buffer to is currently using the XHCI HCD,
which does not carry any DMA operations in certain configrations.
Migration to using the sysdev entry was introduced for DWC3 based
implementations where the IOMMU operations are present.

Replace the reference to the controller device to sysdev instead. This
allows the bounce buffer to be properly mapped to any implementations that
have an IOMMU involved.

cc: stable@vger.kernel.org
Fixes: 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration")
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230915143108.1532163-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull x86 fixes from Ingo Molnar:
"Fix a false-positive KASAN warning, fix an AMD erratum on Zen4 CPUs,
and fix kernel-doc build warnings"

* tag 'x86-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Disable KASAN in apply_alternatives()
x86/cpu: Fix AMD erratum #1485 on Zen4-based CPUs
x86/resctrl: Fix kernel-doc warnings

Check if @cfid->time is set in laundromat so we guarantee that only
fully cached fids will be selected for removal. While we're at it,
add missing locks to protect access of @cfid fields in order to avoid
races with open_cached_dir() and cfids_laundromat_worker(),
respectively.

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Coverity Scan report the following one. This report is a false alarm.
Because fp is never NULL when rc is zero. This patch add null check for fp
in ksmbd_update_fstate to make alarm silence.

*** CID 1568583: Null pointer dereferences (FORWARD_NULL)
/fs/smb/server/smb2pdu.c: 3408 in smb2_open()
3402 path_put(&path);
3403 path_put(&parent_path);
3404 }
3405 ksmbd_revert_fsids(work);
3406 err_out1:
3407 if (!rc) {
>>> CID 1568583: Null pointer dereferences (FORWARD_NULL)
>>> Passing null pointer "fp" to "ksmbd_update_fstate", which dereferences it.
3408 ksmbd_update_fstate(&work->sess->file_table, fp, FP_INITED);
3409 rc = ksmbd_iov_pin_rsp(work, (void *)rsp, iov_len);
3410 }
3411 if (rc) {
3412 if (rc == -EINVAL)
3413 rsp->hdr.Status = STATUS_INVALID_PARAMETER;

Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Reported-by: Coverity Scan <scan-admin@coverity.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull smb server fixes from Steve French:
"Six SMB3 server fixes for various races found by RO0T Lab of Huawei:

- Fix oops when racing between oplock break ack and freeing file

- Simultaneous request fixes for parallel logoffs, and for parallel
lock requests

- Fixes for tree disconnect race, session expire race, and close/open
race"

* tag '6.6-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix race condition between tree conn lookup and disconnect
ksmbd: fix race condition from parallel smb2 lock requests
ksmbd: fix race condition from parallel smb2 logoff requests
ksmbd: fix uaf in smb20_oplock_break_ack
ksmbd: fix race condition with fp
ksmbd: fix race condition between session lookup and expire

On 8xx, PAGE_NONE is handled by setting _PAGE_NA instead of clearing
_PAGE_USER.

But then pte_user() returns 1 also for PAGE_NONE.

As _PAGE_NA prevent reads, add a specific version of pte_read()
that returns 0 when _PAGE_NA is set instead of always returning 1.

Fixes: 351750331fc1 ("powerpc/mm: Introduce _PAGE_NA")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/57bcfbe578e43123f9ed73e040229b80f1ad56ec.1695659959.git.christophe.leroy@csgroup.eu

Suzuki writes:

coresight: Fixes for v6.6

Couple of fixes for the CoreSight self-hosted tracing
targeting v6.6. Includes :

- Fix runtime warnings while reusing the TMC-ETR buffer
- Fix (disable) warning when a large buffer is allocated in
the flat mode.

* tag 'coresight-fixes-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: tmc-etr: Disable warnings for allocation failures
coresight: Fix run time warnings while reusing ETR buffer

Building ad74413r without selecting IIO_BUFFER and
IIO_TRIGGERED_BUFFER generates error with respect to the iio trigger
functions that are used within the driver.
Update the Kconfig accordingly.

Fixes: fea251b6a5db ("iio: addac: add AD74413R driver")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20230912085421.51102-1-antoniu.miclaus@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Pull misc fixes from Andrew Morton:
"Fourteen hotfixes, eleven of which are cc:stable. The remainder
pertain to issues which were introduced after 6.5"

* tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Crash: add lock to serialize crash hotplug handling
selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error
mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified
mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()
mm, memcg: reconsider kmem.limit_in_bytes deprecation
mm: zswap: fix potential memory corruption on duplicate store
arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries
mm: hugetlb: add huge page size param to set_huge_pte_at()
maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states
maple_tree: add mas_is_active() to detect in-tree walks
nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
mm: abstract moving to the next PFN
mm: report success more often from filemap_map_folio_range()
fs: binfmt_elf_efpic: fix personality for ELF-FDPIC

Since commit d8131c2965d5 ("kbuild: remove $(MODLIB)/source symlink"),
modules_install does not create the 'source' symlink.

Remove the stale code from builddeb and kernel.spec.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Currently if ucsi_send_command() fails, then we bail out without
clearing EVENT_PENDING flag. So when the next connector change
event comes, ucsi_connector_change() won't queue the con->work,
because of which none of the new events will be processed.

Fix this by clearing EVENT_PENDING flag if ucsi_send_command()
fails.

Cc: stable@vger.kernel.org # 5.16
Fixes: 512df95b9432 ("usb: typec: ucsi: Better fix for missing unplug events issue")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/1694423055-8440-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull scheduler fixes from Ingo Molnar:
"Two EEVDF fixes"

* tag 'sched-urgent-2023-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/eevdf: Fix pick_eevdf()
sched/eevdf: Fix min_deadline heap integrity

Fei has reported that KASAN triggers during apply_alternatives() on
a 5-level paging machine:

BUG: KASAN: out-of-bounds in rcu_is_watching()
Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0
...
__asan_load4()
rcu_is_watching()
trace_hardirqs_on()
text_poke_early()
apply_alternatives()
...

On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57)
gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on
__VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled().

KASAN gets confused when apply_alternatives() patches the
KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START
static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue.

Fix it for real by disabling KASAN while the kernel is patching alternatives.

[ mingo: updated the changelog ]

Fixes: 6657fca06e3f ("x86/mm: Allow to boot without LA57 if CONFIG_X86_5LEVEL=y")
Reported-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231012100424.1456-1-kirill.shutemov@linux.intel.com

By having laundromat kthread processing cached directories on every
second turned out to be overkill, especially when having multiple SMB
mounts.

Relax it by using a delayed worker instead that gets scheduled on
every @dir_cache_timeout (default=30) seconds per tcon.

This also fixes the 1s delay when tearing down tcon.

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

set_smb2_rsp_status() after __process_request() sets the wrong error
status. This patch resets all iov vectors and sets the error status
on clean one.

Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull misc scheduler fixes from Ingo Molnar:

- Two EEVDF fixes: one to fix sysctl_sched_base_slice propagation, and
to fix an avg_vruntime() corner-case.

- A cpufreq frequency scaling fix

* tag 'sched-urgent-2023-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpufreq: schedutil: Update next_freq when cpufreq_limits change
sched/eevdf: Fix avg_vruntime()
sched/eevdf: Also update slice on placement

if thread A in smb2_write is using work-tcon, other thread B use
smb2_tree_disconnect free the tcon, then thread A will use free'd tcon.

Time
+
Thread A | Thread A
smb2_write | smb2_tree_disconnect
|
|
| kfree(tree_conn)
|
// UAF! |
work->tcon->share_conf |
+

This patch add state, reference count and lock for tree conn to fix race
condition issue.

Reported-by: luosili <rootlab@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>