Pull perf tool updates from Arnaldo Carvalho de Melo:
"Third version of perf tool updates, with the build problems with with
using a 'vmlinux.h' generated from the main build fixed, and the bpf
skeleton build disabled by default.

Build:

- Require libtraceevent to build, one can disable it using
NO_LIBTRACEEVENT=1.

It is required for tools like 'perf sched', 'perf kvm', 'perf
trace', etc.

libtraceevent is available in most distros so installing
'libtraceevent-devel' should be a one-time event to continue
building perf as usual.

Using NO_LIBTRACEEVENT=1 produces tooling that is functional and
sufficient for lots of users not interested in those libtraceevent
dependent features.

- Allow Python support in 'perf script' when libtraceevent isn't
linked, as not all features requires it, for instance Intel PT does
not use tracepoints.

- Error if the python interpreter needed for jevents to work isn't
available and NO_JEVENTS=1 isn't set, preventing a build without
support for JSON vendor events, which is a rare but possible
condition. The two check error messages:

$(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.)
$(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.)

- Make libbpf 1.0 the minimum required when building with out of
tree, distro provided libbpf.

- Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++
demangler, add 'perf test' entry for it.

- Make binutils libraries opt in, as distros disable building with it
due to licensing, they were used for C++ demangling, for instance.

- Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or
equivalent) isn't installed, we'll just have a build warning:

Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev

- Add a feature test for scandirat(), that is not implemented so far
in musl and uclibc, disabling features that need it, such as
scanning for tracepoints in /sys/kernel/tracing/events.

perf BPF filters:

- New feature where BPF can be used to filter samples, for instance:

$ sudo ./perf record -e cycles --filter 'period > 1000' true
$ sudo ./perf script
perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms])
perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms])
perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms])
perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms])
perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms])
true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms])
true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)

- In addition to 'period' (PERF_SAMPLE_PERIOD), the other
PERF_SAMPLE_ can be used for filtering, and also some other sample
accessible values, from tools/perf/Documentation/perf-record.txt:

Essentially the BPF filter expression is:

<term> <operator> <value> (("," | "||") <term> <operator> <value>)*

The <term> can be one of:
ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr,
code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat,
p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock,
mem_dtlb, mem_blk, mem_hops

The <operator> can be one of:
==, !=, >, >=, <, <=, &

The <value> can be one of:
<number> (for any term)
na, load, store, pfetch, exec (for mem_op)
l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl)
na, none, hit, miss, hitm, fwd, peer (for mem_snoop)
remote (for mem_remote)
na, locked (for mem_locked)
na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb)
na, by_data, by_addr (for mem_blk)
hops0, hops1, hops2, hops3 (for mem_hops)

perf lock contention:

- Show lock type with address.

- Track and show mmap_lock, siglock and per-cpu rq_lock with address.
This is done for mmap_lock by following the current->mm pointer:

$ sudo ./perf lock con -abl -- sleep 10
contended total wait max wait avg wait address symbol
...
16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640
17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0
3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock
3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58
1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70
9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock
14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0
3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock
16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560
11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock
1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8
1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock
581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058
5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070
112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120
381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock
255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80

- Update default map size to 16384.

- Allocate single letter option -M for --map-nr-entries, as it is
proving being frequently used.

- Fix struct rq lock access for older kernels with BPF's CO-RE
(Compile once, run everywhere).

- Fix problems found with MSAn.

perf report/top:

- Add inline information when using --call-graph=fp or lbr, as was
already done to the --call-graph=dwarf callchain mode.

- Improve the 'srcfile' sort key performance by really using an
optimization introduced in 6.2 for the 'srcline' sort key that
avoids calling addr2line for comparision with each sample.

perf sched:

- Make 'perf sched latency/map/replay' to use "sched:sched_waking"
instead of "sched:sched_waking", consistent with 'perf record'
since d566a9c2d482 ("perf sched: Prefer sched_waking event when it
exists").

perf ftrace:

- Make system wide the default target for latency subcommand, run the
following command then generate some network traffic and press
control+C:

# perf ftrace latency -T __kfree_skb
^C
DURATION | COUNT | GRAPH |
0 - 1 us | 27 | ############# |
1 - 2 us | 22 | ########### |
2 - 4 us | 8 | #### |
4 - 8 us | 5 | ## |
8 - 16 us | 24 | ############ |
16 - 32 us | 2 | # |
32 - 64 us | 1 | |
64 - 128 us | 0 | |
128 - 256 us | 0 | |
256 - 512 us | 0 | |
512 - 1024 us | 0 | |
1 - 2 ms | 0 | |
2 - 4 ms | 0 | |
4 - 8 ms | 0 | |
8 - 16 ms | 0 | |
16 - 32 ms | 0 | |
32 - 64 ms | 0 | |
64 - 128 ms | 0 | |
128 - 256 ms | 0 | |
256 - 512 ms | 0 | |
512 - 1024 ms | 0 | |
1 - ... s | 0 | |
#

perf top:

- Add --branch-history (LBR: Last Branch Record) option, just like
already available for 'perf record'.

- Fix segfault in thread__comm_len() where thread->comm was being
used outside thread->comm_lock.

perf annotate:

- Allow configuring objdump and addr2line in ~/.perfconfig., so that
you can use alternative binaries, such as llvm's.

perf kvm:

- Add TUI mode for 'perf kvm stat report'.

Reference counting:

- Add reference count checking infrastructure to check for use after
free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs,
more to come.

To build with it use -DREFCNT_CHECKING=1 in the make command line
to build tools/perf. Documented at:

https://perf.wiki.kernel.org/index.php/Reference_Count_Checking

- The above caught, for instance, fix, present in this series:

- Fix maps use after put in 'perf test "Share thread maps"':

'maps' is copied from leader, but the leader is put on line 79
and then 'maps' is used to read the reference count below - so
a use after put, with the put of maps happening within
thread__put.

Fixed by reversing the order of puts so that the leader is put
last.

- Also several fixes were made to places where reference counts were
not being held.

- Make this one of the tests in 'make -C tools/perf build-test' to
regularly build test it and to make sure no direct access to the
reference counted structs are made, doing that via accessors to
check the validity of the struct pointer.

ARM64:

- Fix 'perf report' segfault when filtering coresight traces by
sparse lists of CPUs.

- Add support for 'simd' as a sort field for 'perf report', to show
ARM's NEON SIMD's predicate flags: "partial" and "empty".

arm64 vendor events:

- Add N1 metrics.

Intel vendor events:

- Add graniterapids, grandridge and sierraforrest events.

- Refresh events for: alderlake, aldernaken, broadwell, broadwellde,
broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex,
jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids,
silvermont, skylake, tigerlake and westmereep-dp

- Refresh metrics for alderlake-n, broadwell, broadwellde,
broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and
skylakex.

perf stat:

- Implement --topdown using JSON metrics.

- Add TopdownL1 JSON metric as a default if present, but disable it
for now for some Intel hybrid architectures, a series of patches
addressing this is being reviewed and will be submitted for v6.5.

- Use metrics for --smi-cost.

- Update topdown documentation.

Vendor events (JSON) infrastructure:

- Add support for computing and printing metric threshold values. For
instance, here is one found in thesapphirerapids json file:

{
"BriefDescription": "Percentage of cycles spent in System Management Interrupts.",
"MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)",
"MetricGroup": "smi",
"MetricName": "smi_cycles",
"MetricThreshold": "smi_cycles > 0.1",
"ScaleUnit": "100%"
},

- Test parsing metric thresholds with the fake PMU in 'perf test
pmu-events'.

- Support for printing metric thresholds in 'perf list'.

- Add --metric-no-threshold option to 'perf stat'.

- Add rand (reverse and) and has_pmem (optane memory) support to
metrics.

- Sort list of input files to avoid depending on the order from
readdir() helping in obtaining reproducible builds.

S/390:

- Add common metrics: - CPI (cycles per instruction), prbstate (ratio
of instructions executed in problem state compared to total number
of instructions), l1mp (Level one instruction and data cache misses
per 100 instructions).

- Add cache metrics for z13, z14, z15 and z16.

- Add metric for TLB and cache.

ARM:

- Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE
(Memory Tagging Extension) and MOPS (Memory Operations) load/store.

Intel PT hardware tracing:

- Add event type names UINTR (User interrupt delivered) and UIRET
(Exiting from user interrupt routine), documented in table 32-50
"CFE Packet Type and Vector Fields Details" in the Intel Processor
Trace chapter of The Intel SDM Volume 3 version 078.

- Add support for new branch instructions ERETS and ERETU.

- Fix CYC timestamps after standalone CBR

ARM CoreSight hardware tracing:

- Allow user to override timestamp and contextid settings.

- Fix segfault in dso lookup.

- Fix timeless decode mode detection.

- Add separate decode paths for timeless and per-thread modes.

auxtrace:

- Fix address filter entire kernel size.

Miscellaneous:

- Fix use-after-free and unaligned bugs in the PLT handling routines.

- Use zfree() to reduce chances of use after free.

- Add missing 0x prefix for addresses printed in hexadecimal in 'perf
probe'.

- Suppress massive unsupported target platform errors in the unwind
code.

- Fix return incorrect build_id size in elf_read_build_id().

- Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 .

- Add missing new parameter in kfree_skb tracepoint to the python
scripts using it.

- Add 'perf bench syscall fork' benchmark.

- Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in
'perf mem'.

- Fix wrong size expectation for perf test 'Setup struct
perf_event_attr' caused by the patch adding
perf_event_attr::config3.

- Fix some spelling mistakes"

* tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits)
Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL"
Revert "perf build: Warn for BPF skeletons if endian mismatches"
perf metrics: Fix SEGV with --for-each-cgroup
perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE
perf stat: Separate bperf from bpf_profiler
perf test record+probe_libc_inet_pton: Fix call chain match on x86_64
perf test record+probe_libc_inet_pton: Fix call chain match on s390
perf tracepoint: Fix memory leak in is_valid_tracepoint()
perf cs-etm: Add fix for coresight trace for any range of CPUs
perf build: Fix unescaped # in perf build-test
perf unwind: Suppress massive unsupported target platform errors
perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it
perf script: Print raw ip instead of binary offset for callchain
perf symbols: Fix return incorrect build_id size in elf_read_build_id()
perf list: Modify the warning message about scandirat(3)
perf list: Fix memory leaks in print_tracepoint_events()
perf lock contention: Rework offset calculation with BPF CO-RE
perf lock contention: Fix struct rq lock access
perf stat: Disable TopdownL1 on hybrid
perf stat: Avoid SEGV on counter->name
...

Pull debugobjects fix from Thomas Gleixner:
"A single fix for debugobjects:

The recent fix to ensure atomicity of lookup and allocation
inadvertently broke the pool refill mechanism, so that debugobject
OOMs now in certain situations. The reason is that the functions which
got updated no longer invoke debug_objecs_init(), which is now the
only place to care about refilling the tracking object pool.

Restore the original behaviour by adding explicit refill opportunities
to those places"

* tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobject: Ensure pool refill (again)

This reverts commit a980755beb5aca9002e1c95ba519b83a44242b5b.

We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull crypto fixes from Herbert Xu:

- A long-standing bug in crypto_engine

- A buggy but harmless check in the sun8i-ss driver

- A regression in the CRYPTO_USER interface

* tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: api - Fix CRYPTO_USER checks for report function
crypto: engine - fix crypto_queue backlog handling
crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()

The recent fix to ensure atomicity of lookup and allocation inadvertently
broke the pool refill mechanism.

Prior to that change debug_objects_activate() and debug_objecs_assert_init()
invoked debug_objecs_init() to set up the tracking object for statically
initialized objects. That's not longer the case and debug_objecs_init() is
now the only place which does pool refills.

Depending on the number of statically initialized objects this can be
enough to actually deplete the pool, which was observed by Ido via a
debugobjects OOM warning.

Restore the old behaviour by adding explicit refill opportunities to
debug_objects_activate() and debug_objecs_assert_init().

Fixes: 63a759694eed ("debugobject: Prevent init race with static objects")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/871qk05a9d.ffs@tglx

This reverts commit 51924ae69eea5bc90b5da525fbcf4bbd5f8551b3.

We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull cifs fixes from Steve French:
"smb3 client fixes, mostly DFS or reconnect related:

- Two DFS connection sharing fixes

- DFS refresh fix

- Reconnect fix

- Two potential use after free fixes

- Also print prefix patch in mount debug msg

- Two small cleanup fixes"

* tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Remove unneeded semicolon
cifs: fix sharing of DFS connections
cifs: avoid potential races when handling multiple dfs tcons
cifs: protect access of TCP_Server_Info::{origin,leaf}_fullpath
cifs: fix potential race when tree connecting ipc
cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname
cifs: print smb3_fs_context::source when mounting
cifs: protect session status check in smb2_reconnect()
SMB3.1.1: correct definition for app_instance_id create contexts

Checking the config via ifdef incorrectly compiles out the report
functions when CRYPTO_USER is set to =m. Fix it by using IS_ENABLED()
instead.

Fixes: c0f9e01dd266 ("crypto: api - Check CRYPTO_USER instead of NET for report")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Statically initialized objects are usually not initialized via the init()
function of the subsystem. They are special cased and the subsystem
provides a function to validate whether an object which is not yet tracked
by debugobjects is statically initialized. This means the object is started
to be tracked on first use, e.g. activation.

This works perfectly fine, unless there are two concurrent operations on
that object. Schspa decoded the problem:

T0 T1

debug_object_assert_init(addr)
lock_hash_bucket()
obj = lookup_object(addr);
if (!obj) {
unlock_hash_bucket();
- > preemption
lock_subsytem_object(addr);
activate_object(addr)
lock_hash_bucket();
obj = lookup_object(addr);
if (!obj) {
unlock_hash_bucket();
if (is_static_object(addr))
init_and_track(addr);
lock_hash_bucket();
obj = lookup_object(addr);
obj->state = ACTIVATED;
unlock_hash_bucket();

subsys function modifies content of addr,
so static object detection does
not longer work.

unlock_subsytem_object(addr);

if (is_static_object(addr)) <- Fails

debugobject emits a warning and invokes the fixup function which
reinitializes the already active object in the worst case.

This race exists forever, but was never observed until mod_timer() got a
debug_object_assert_init() added which is outside of the timer base lock
held section right at the beginning of the function to cover the lockless
early exit points too.

Rework the code so that the lookup, the static object check and the
tracking object association happens atomically under the hash bucket
lock. This prevents the issue completely as all callers are serialized on
the hash bucket lock and therefore cannot observe inconsistent state.

Fixes: 3ac7fe5a4aab ("infrastructure to debug (dynamic) objects")
Reported-by: syzbot+5093ba19745994288b53@syzkaller.appspotmail.com
Debugged-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://syzkaller.appspot.com/bug?id=22c8a5938eab640d1c6bcc0e3dc7be519d878462
Link: https://lore.kernel.org/lkml/20230303161906.831686-1-schspa@gmail.com
Link: https://lore.kernel.org/r/87zg7dzgao.ffs@tglx

Ensure the metric threshold is copied correctly or else a use of
uninitialized memory happens.

Fixes: d0a3052f6faefffc ("perf metric: Compute and print threshold values")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230505204119.3443491-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull clk fixes from Stephen Boyd:
"A couple more patches that would be good to get into -rc1:

- Revert an i.MX patch that's causing video failures because division
math goes sideways

- Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit
variable instead of the usual u64 type

- Fix a Kconfig bug in the StarFive JH7110 clk config that selects a
reset controller when it can't be selected"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case
clk: sp7021: Adjust width of _m in HWM_FIELD_PREP()
Revert "clk: imx: composite-8m: Add support to determine_rate"

./fs/cifs/smb2pdu.c:4140:2-3: Unneeded semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4863
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

CRYPTO_TFM_REQ_MAY_BACKLOG tells the crypto driver that it should
internally backlog requests until the crypto hw's queue becomes
full. At that point, crypto_engine backlogs the request and returns
-EBUSY. Calling driver such as dm-crypt then waits until the
complete() function is called with a status of -EINPROGRESS before
sending a new request.

The problem lies in the call to complete() with a value of -EINPROGRESS
that is made when a backlog item is present on the queue. The call is
done before the successful execution of the crypto request. In the case
that do_one_request() returns < 0 and the retry support is available,
the request is put back in the queue. This leads upper drivers to send
a new request even if the queue is still full.

The problem can be reproduced by doing a large dd into a crypto
dm-crypt device. This is pretty easy to see when using
Freescale CAAM crypto driver and SWIOTLB dma. Since the actual amount
of requests that can be hold in the queue is unlimited we get IOs error
and dma allocation.

The fix is to call complete with a value of -EINPROGRESS only if
the request is not enqueued back in crypto_queue. This is done
by calling complete() later in the code. In order to delay the decision,
crypto_queue is modified to correctly set the backlog pointer
when a request is enqueued back.

Fixes: 6a89f492f8e5 ("crypto: engine - support for parallel requests based on retry mechanism")
Co-developed-by: Sylvain Ouellet <souellet@genetec.com>
Signed-off-by: Sylvain Ouellet <souellet@genetec.com>
Signed-off-by: Olivier Bacon <obacon@genetec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Linus reported a build break due to using a vmlinux without a BTF elf
section to generate the vmlinux.h header with bpftool for use in the BPF
tools in tools/perf/util/bpf_skel/*.bpf.c.

Instead add a vmlinux.h file with the structs needed with the fields the
tools need, marking the structs with __attribute__((preserve_access_index)),
so that libbpf's CO-RE code can fixup the struct field offsets.

In some cases the vmlinux.h file that was being generated by bpftool
from the kernel BTF information was not needed at all, just including
linux/bpf.h, sometimes linux/perf_event.h was enough as non-UAPI
types were not being used.

To keep te patch small, include those UAPI headers from the trimmed down
vmlinux.h file, that then provides the tools with just the structs and
the subset of its fields needed for them.

Testing it:

# perf lock contention -b find / > /dev/null
^C contended total wait max wait avg wait type caller

7 53.59 us 10.86 us 7.66 us rwlock:R start_this_handle+0xa0
2 30.35 us 21.99 us 15.17 us rwsem:R iterate_dir+0x52
1 9.04 us 9.04 us 9.04 us rwlock:W start_this_handle+0x291
1 8.73 us 8.73 us 8.73 us spinlock raw_spin_rq_lock_nested+0x1e
#
# perf lock contention -abl find / > /dev/null
^C contended total wait max wait avg wait address symbol

1 262.96 ms 262.96 ms 262.96 ms ffff8e67502d0170 (mutex)
12 244.24 us 39.91 us 20.35 us ffff8e6af56f8070 mmap_lock (rwsem)
7 30.28 us 6.85 us 4.33 us ffff8e6c865f1d40 rq_lock (spinlock)
3 7.42 us 4.03 us 2.47 us ffff8e6c864b1d40 rq_lock (spinlock)
2 3.72 us 2.19 us 1.86 us ffff8e6c86571d40 rq_lock (spinlock)
1 2.42 us 2.42 us 2.42 us ffff8e6c86471d40 rq_lock (spinlock)
4 2.11 us 559 ns 527 ns ffffffff9a146c80 rcu_state (spinlock)
3 1.45 us 818 ns 482 ns ffff8e674ae8384c (rwlock)
1 870 ns 870 ns 870 ns ffff8e68456ee060 (rwlock)
1 663 ns 663 ns 663 ns ffff8e6c864f1d40 rq_lock (spinlock)
1 573 ns 573 ns 573 ns ffff8e6c86531d40 rq_lock (spinlock)
1 472 ns 472 ns 472 ns ffff8e6c86431740 (spinlock)
1 397 ns 397 ns 397 ns ffff8e67413a4f04 (spinlock)
#
# perf test offcpu
95: perf record offcpu profiling tests : Ok
#
# perf kwork latency --use-bpf
Starting trace, Hit <Ctrl+C> to stop and report
^C
Kwork Name | Cpu | Avg delay | Count | Max delay | Max delay start | Max delay end |
--------------------------------------------------------------------------------------------------------------------------------
(w)flush_memcg_stats_dwork | 0000 | 1056.212 ms | 2 | 2112.345 ms | 550113.229573 s | 550115.341919 s |
(w)toggle_allocation_gate | 0000 | 10.144 ms | 62 | 416.389 ms | 550113.453518 s | 550113.869907 s |
(w)0xffff8e6748e28080 | 0002 | 0.623 ms | 1 | 0.623 ms | 550110.989841 s | 550110.990464 s |
(w)vmstat_shepherd | 0000 | 0.586 ms | 10 | 2.828 ms | 550111.971536 s | 550111.974364 s |
(w)vmstat_update | 0007 | 0.363 ms | 5 | 1.634 ms | 550113.222520 s | 550113.224154 s |
(w)vmstat_update | 0000 | 0.324 ms | 10 | 2.827 ms | 550111.971526 s | 550111.974354 s |
(w)0xffff8e674c5f4a58 | 0002 | 0.102 ms | 5 | 0.134 ms | 550110.989839 s | 550110.989972 s |
(w)psi_avgs_work | 0001 | 0.086 ms | 3 | 0.107 ms | 550114.957852 s | 550114.957959 s |
(w)psi_avgs_work | 0000 | 0.079 ms | 5 | 0.100 ms | 550118.605668 s | 550118.605768 s |
(w)kfree_rcu_monitor | 0006 | 0.079 ms | 1 | 0.079 ms | 550110.925821 s | 550110.925900 s |
(w)psi_avgs_work | 0004 | 0.079 ms | 1 | 0.079 ms | 550109.581835 s | 550109.581914 s |
(w)psi_avgs_work | 0001 | 0.078 ms | 1 | 0.078 ms | 550109.197809 s | 550109.197887 s |
(w)psi_avgs_work | 0002 | 0.077 ms | 5 | 0.086 ms | 550110.669819 s | 550110.669905 s |
<SNIP>
# strace -e bpf -o perf-stat-bpf-counters.output perf stat -e cycles --bpf-counters sleep 1

Performance counter stats for 'sleep 1':

6,197,983 cycles

1.003922848 seconds time elapsed

0.000000000 seconds user
0.002032000 seconds sys

# head -7 perf-stat-bpf-counters.output
bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/perf_attr_map", bpf_fd=0, file_flags=0}, 16) = 3
bpf(BPF_OBJ_GET_INFO_BY_FD, {info={bpf_fd=3, info_len=88, info=0x7ffcead64990}}, 16) = 0
bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=3, key=0x24129e0, value=0x7ffcead65a48, flags=BPF_ANY}, 32) = 0
bpf(BPF_LINK_GET_FD_BY_ID, {link_id=1252}, 12) = -1 ENOENT (No such file or directory)
bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65780, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0,
+func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 116) = 4
bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65920, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0,
+func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0, fd_array=NULL}, 128) = 4
bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0\20\0\0\0\20\0\0\0\5\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=45, btf_log_size=0, btf_log_level=0}, 28) = 4
#

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/lkml/ZFU1PJrn8YtHIqno@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull mailbox updates from Jassi Brar:

- mailbox api: allow direct registration to a channel and convert omap
and pcc to use mbox_bind_client

- omap and hi6220 : use of_property_read_bool

- test: fix double-free and use spinlock header

- rockchip and bcm-pdc: drop of_match_ptr

- mpfs: change config symbol

- mediatek gce: support MT6795

- qcom apcs: consolidate of_device_id and support IPQ9574

* tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC
mailbox: qcom-apcs-ipc: do not grow the of_device_id
dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants
dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795
mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
mailbox: bcm-pdc: drop of_match_ptr for ID table
mailbox: rockchip: drop of_match_ptr for ID table
mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()
mailbox: mailbox-test: Explicitly include header for spinlock support
mailbox: Use of_property_read_bool() for boolean properties
mailbox: pcc: Use mbox_bind_client
mailbox: omap: Use mbox_bind_client
mailbox: Allow direct registration to a channel

When (ARCH_STARFIVE [=n] && COMPILE_TEST [=y] && RESET_CONTROLLER [=n]),
RESET_STARFIVE_JH7110 can't be selected by CLK_STARFIVE_JH7110_SYS
and CLK_STARFIVE_JH7110_AON.

Add a condition `if RESET_CONTROLLER` to fix it. Also, delete redundant
selected options of CLK_STARFIVE_JH7110_AON because these options are
already selected by the dependency.

Fixes: edab7204afe5 ("clk: starfive: Add StarFive JH7110 system clock driver")
Fixes: b2ab3c94f41f ("clk: starfive: Add StarFive JH7110 always-on clock driver")
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230418123756.62495-2-hal.feng@starfivetech.com
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

When matching DFS connections, we can't rely on the values set in
cifs_sb_info::prepath and cifs_tcon::tree_name as they might change
during DFS failover. The DFS referrals related to a specific DFS tcon
are already matched earlier in match_server(), therefore we can safely
skip those checks altogether as the connection is guaranteed to be
unique for the DFS tcon.

Besides, when creating or finding an SMB session, make sure to also
refcount any DFS root session related to it (cifs_ses::dfs_root_ses),
so if a new DFS mount ends up reusing the connection from the old
mount while there was an umount(2) still in progress (e.g. umount(2)
-> cifs_umount() -> reconnect -> cifs_put_tcon()), the connection
could potentially be put right after the umount(2) finished.

Patch has minor update to include fix for unused variable issue
noted by the kernel test robot

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305041040.j7W2xQSy-lkp@intel.com/
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

SS_ENCRYPTION is (0 << 7 = 0), so the test can never be true.
Use a direct comparison to SS_ENCRYPTION instead.

The same king of test is already done the same way in sun8i_ss_run_task().

Fixes: 359e893e8af4 ("crypto: sun8i-ss - rework handling of IV")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull perf fixes from Borislav Petkov:

- Fix "same task" check when redirecting event output

- Do not wait unconditionally for RCU on the event migration path if
there are no events to migrate

* tag 'perf_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix the same task check in perf_event_set_output
perf: Optimize perf_pmu_migrate_context()

It seems that perf stat -b <prog id> doesn't produce any results:

$ perf stat -e cycles -b 4 -I 10000 -vvv
Control descriptor is not initialized
cycles: 0 0 0
time counts unit events
10.007641640 <not supported> cycles

Looks like this happens because fentry/fexit progs are getting loaded, but the
corresponding perf event is not enabled and not added into the events bpf map.
I think there is some mixing up between two type of bpf support, one for bperf
and one for bpf_profiler. Both are identified via evsel__is_bpf, based on which
perf events are enabled, but for the latter (bpf_profiler) a perf event is
required. Using evsel__is_bperf to check only bperf produces expected results:

$ perf stat -e cycles -b 4 -I 10000 -vvv
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
size 136
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
[...perf_event_attr for other CPUs...]
------------------------------------------------------------
cycles: 309426 169009 169009
time counts unit events
10.010091271 309426 cycles

The final numbers correspond (at least in the level of magnitude) to the
same metric obtained via bpftool.

Fixes: 112cb56164bc2108 ("perf stat: Introduce config stat.bpf-counter-events")
Reviewed-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Tested-by: Song Liu <song@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230412182316.11628-1-9erthalion6@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull more io_uring updates from Jens Axboe:
"Nothing major in here, just two different parts:

- A small series from Breno that enables passing the full SQE down
for ->uring_cmd().

This is a prerequisite for enabling full network socket operations.
Queued up a bit late because of some stylistic concerns that got
resolved, would be nice to have this in 6.4-rc1 so the dependent
work will be easier to handle for 6.5.

- Fix for the huge page coalescing, which was a regression introduced
in the 6.3 kernel release (Tobias)"

* tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux:
io_uring: Remove unnecessary BUILD_BUG_ON
io_uring: Pass whole sqe to commands
io_uring: Create a helper to return the SQE size
io_uring/rsrc: check for nonconsecutive pages

Add the mailbox compatible for IPQ9574 SoC.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

When building with clang + W=1, there is a warning around an internal
comparison check within the FIELD_PREP() macro, due to a 32-bit variable
comparison against ~0ull:

drivers/clk/clk-sp7021.c:316:8: error: result of comparison of constant 18446744073709551615 with expression of type 'typeof (_Generic((_m), ...' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
r0 |= HWM_FIELD_PREP(MASK_SEL_FRA, clk->p[SEL_FRA]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/clk/clk-sp7021.c:45:15: note: expanded from macro 'HWM_FIELD_PREP'
(_m << 16) | FIELD_PREP(_m, value); \
^~~~~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:114:3: note: expanded from macro 'FIELD_PREP'
__BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:71:53: note: expanded from macro '__BF_FIELD_CHECK'
BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) > \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/compiler_types.h:397:22: note: expanded from macro 'compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:385:23: note: expanded from macro '_compiletime_assert'
__compiletime_assert(condition, msg, prefix, suffix)
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:377:9: note: expanded from macro '__compiletime_assert'
if (!(condition)) \
^~~~~~~~~

This is expected given the types of the input. Increase the size of the
temporary variable in HWM_FIELD_PREP() to eliminate the warning, which
follows the logic of commit cfd6fb45cfaf ("crypto: ccree - avoid
out-of-range warnings from clang") for the same reasons.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230501-sp7021-field_prep-warning-v1-1-5b36d71feefe@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/202303221947.pXP2v4xJ-lkp@intel.com/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Now that a DFS tcon manages its own list of DFS referrals and
sessions, there is no point in having a single worker to refresh
referrals of all DFS tcons. Make it faster and less prone to race
conditions when having several mounts by queueing a worker per DFS
tcon that will take care of refreshing only the DFS referrals related
to it.

Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Mendocino and later platform don't use the platform feature mailbox for
communication for I2C arbitration, they rely upon ringing a doorbell.

Detect the platform by the device ID of the root port and choose the
appropriate method.

Link: https://lore.kernel.org/linux-i2c/20220916131854.687371-3-jsd@semihalf.com/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Mark Hasemeyer <markhas@chromium.org>
Tested-by: Mark Hasemeyer <markhas@chromium.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull x86 fixes from Borislav Petkov:

- Add a new Intel Arrow Lake CPU model number

- Fix a confusion about how to check the version of the ACPI spec which
supports a "online capable" bit in the MADT table which lead to a
bunch of boot breakages with Zen1 systems and VMs

* tag 'x86_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add model number for Intel Arrow Lake processor
x86/acpi/boot: Correct acpi_is_processor_usable() check
x86/ACPI/boot: Use FADT version to check support for online capable

The same task check in perf_event_set_output has some potential issues
for some usages.

For the current perf code, there is a problem if using of
perf_event_open() to have multiple samples getting into the same mmap’d
memory when they are both attached to the same process.
https://lore.kernel.org/all/92645262-D319-4068-9C44-2409EF44888E@gmail.com/
Because the event->ctx is not ready when the perf_event_set_output() is
invoked in the perf_event_open().

Besides the above issue, before the commit bd2756811766 ("perf: Rewrite
core context handling"), perf record can errors out when sampling with
a hardware event and a software event as below.
$ perf record -e cycles,dummy --per-thread ls
failed to mmap with 22 (Invalid argument)
That's because that prior to the commit a hardware event and a software
event are from different task context.

The problem should be a long time issue since commit c3f00c70276d
("perk: Separate find_get_context() from event initialization").

The task struct is stored in the event->hw.target for each per-thread
event. It is a more reliable way to determine whether two events are
attached to the same task.

The event->hw.target was also introduced several years ago by the
commit 50f16a8bf9d7 ("perf: Remove type specific target pointers"). It
can not only be used to fix the issue with the current code, but also
back port to fix the issues with an older kernel.

Note: The event->hw.target was introduced later than commit
c3f00c70276d. The patch may cannot be applied between the commit
c3f00c70276d and commit 50f16a8bf9d7. Anybody that wants to back-port
this at that period may have to find other solutions.

Fixes: c3f00c70276d ("perf: Separate find_get_context() from event initialization")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lkml.kernel.org/r/20230322202449.512091-1-kan.liang@linux.intel.com

The test case probe libc's inet_pton & backtrace it with ping fails with
Fedora 38 on x86_64.

Function getaddrinfo() does not show up in the call chain anymore:

# ./perf script
ping 1803 [000] 728.567146: probe_libc:inet_pton: (7f5275afc840)
133840 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
27b4a __libc_start_call_main+0x7a (/usr/lib64/libc.so.6)
27c0b __libc_start_main@@GLIBC_2.34+0x8b (/usr/lib64/libc.so.6)

ping 1803 [000] 728.567184: probe_libc:inet_pton: (7f5275afc840)
133840 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
493e main+0xcde (/usr/bin/ping)
27b4a __libc_start_call_main+0x7a (/usr/lib64/libc.so.6)

#

which causes the test case to fail. Remove function getaddrinfo()
from list of expected functions.

Output before:

# ./perf test 'libc'
91: probe libc's inet_pton & backtrace it with ping : FAILED!
#

Output after:

# ./perf test 'libc'
91: probe libc's inet_pton & backtrace it with ping : Ok
#

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230503081255.3372986-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull dmapool updates - again - from Andrew Morton:
"Reinstate the dmapool changes which were accidentally removed by a
mishap on the last commit in the previous attempt at the series"

Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup").

[ The whole old series: def8574308ed..2d55c16c0c54 results in an empty
diff because that last commit ended up being just a revert of all that
came everything before it. - Linus ]

* tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
dmapool: link blocks across pages
dmapool: don't memset on free twice
dmapool: simplify freeing
dmapool: consolidate page initialization
dmapool: rearrange page alloc failure handling
dmapool: move debug code to own functions
dmapool: speedup DMAPOOL_DEBUG with init_on_alloc
dmapool: cleanup integer types
dmapool: use sysfs_emit() instead of scnprintf()
dmapool: remove checks for dev == NULL

In the io_uring_cmd_prep_async() there is an unnecessary compilation time
check to check if cmd is correctly placed at field 48 of the SQE.

This is unnecessary, since this check is already in place at
io_uring_init():

BUILD_BUG_SQE_ELEM(48, __u64, addr3);

Remove it and the uring_cmd_pdu_size() function, which is not used
anymore.

Keith started a discussion about this topic in the following thread:
Link: https://lore.kernel.org/lkml/ZDBmQOhbyU0iLhMw@kbusch-mbp.dhcp.thefacebook.com/

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230504121856.904491-4-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Re-organize the compatible devices and add a comment to avoid unneeded
of_device_id growth with every new SoC. These devices have quite a lot
of similarities and they can use only one compatible fallback for driver
binding.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

This reverts commit 156e96ff2172518b6f83e97d8f11f677bc668e22.

This patch was found to cause some division issues on the i.MX8MP
which causes the video clocks to not properly divide when division
was greate than 8. This causes video failures on disp1_pix and
disp2_pix clocks.

Until a better solution is found, we'll have to revert this.

Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20230423123828.1346511-1-aford173@gmail.com
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Protect access of TCP_Server_Info::{origin,leaf}_fullpath when
matching DFS connections, and get rid of
TCP_Server_Info::current_fullpath while we're at it.

Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Currently the PSP semaphore communication base address is discovered
by using an MSR that is not architecturally guaranteed for future
platforms. Also the mailbox that is utilized for communication with
the PSP may have other consumers in the kernel, so it's better to
make all communication go through a single driver.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Hasemeyer <markhas@chromium.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Mark Hasemeyer <markhas@chromium.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull compute express link (cxl) fixes from Dan Williams:
"Several fixes for driver startup regressions that landed during the
merge window as well as some older bugs.

The regressions were due to a lack of testing with what the CXL
specification calls Restricted CXL Host (RCH) topologies compared to
the testing with Virtual Host (VH) CXL topologies. A VH topology is
typical PCIe while RCH topologies map CXL endpoints as Root Complex
Integrated endpoints. The impact is some driver crashes on startup.

This merge window also added compatibility for range registers (the
mechanism that CXL 1.1 defined for mapping memory) to treat them like
HDM decoders (the mechanism that CXL 2.0 defined for mapping
Host-managed Device Memory). That work collided with the new region
enumeration code that was tested with CXL 2.0 setups, and fails with
crashes at startup.

Lastly, the DOE (Data Object Exchange) implementation for retrieving
an ACPI-like data table from CXL devices is being reworked for v6.4.
Several fixes fell out of that work that are suitable for v6.3.

All of this has been in linux-next for a while, and all reported
issues [1] have been addressed.

Summary:

- Fix several issues with region enumeration in RCH topologies that
can trigger crashes on driver startup or shutdown.

- Fix CXL DVSEC range register compatibility versus region
enumeration that leads to startup crashes

- Fix CDAT endiannes handling

- Fix multiple buffer handling boundary conditions

- Fix Data Object Exchange (DOE) workqueue usage vs
CONFIG_DEBUG_OBJECTS warn splats"

Link: http://lore.kernel.org/r/20230405075704.33de8121@canb.auug.org.au [1]

* tag 'cxl-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/hdm: Extend DVSEC range register emulation for region enumeration
cxl/hdm: Limit emulation to the number of range registers
cxl/region: Move coherence tracking into cxl_region_attach()
cxl/region: Fix region setup/teardown for RCDs
cxl/port: Fix find_cxl_root() for RCDs and simplify it
cxl/hdm: Skip emulation when driver manages mem_enable
cxl/hdm: Fix double allocation of @cxlhdm
PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y
PCI/DOE: Silence WARN splat with CONFIG_DEBUG_OBJECTS=y
cxl/pci: Handle excessive CDAT length
cxl/pci: Handle truncated CDAT entries
cxl/pci: Handle truncated CDAT header
cxl/pci: Fix CDAT retrieval on big endian

Successor to Lunar Lake.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230404174641.426593-1-tony.luck@intel.com

Thomas reported that offlining CPUs spends a lot of time in
synchronize_rcu() as called from perf_pmu_migrate_context() even though
he's not actually using uncore events.

Turns out, the thing is unconditionally waiting for RCU, even if there's
no actual events to migrate.

Fixes: 0cda4c023132 ("perf: Introduce perf_pmu_migrate_context()")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lkml.kernel.org/r/20230403090858.GT4253@hirez.programming.kicks-ass.net

With Fedora 38 the perf test 86 probe libc's inet_pton fails on s390.
The call chain of the ping command changed. The functions
text_to_binary_address() and gaih_inet() do not show up in the call
chain anymore.

Output before:

# ./perf test -v 86
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 541050
fgrep: warning: fgrep is obsolescent; using grep -F
fgrep: warning: fgrep is obsolescent; using grep -F
BFD: DWARF error: could not find variable specification at offset 0x22011
...

ping 541078 [002] 348826.679581: probe_libc:inet_pton_1: (3ffad84b940)
14b940 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
10e9c3 __GI_getaddrinfo+0xeb3 (inlined)
4397 main+0x737 (/usr/bin/ping)
FAIL: expected backtrace entry "gaih_inet.*\+0x[[:xdigit:]]\
+[[:space:]]\(/usr/lib64/libc.so.6|inlined\)$"
got "4397 main+0x737 (/usr/bin/ping)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
#

Output after:

# ./perf test -v 86
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 541098
fgrep: warning: fgrep is obsolescent; using grep -F
fgrep: warning: fgrep is obsolescent; using grep -F
BFD: DWARF error: could not find variable specification at offset 0x309d1
...

ping 541126 [006] 349309.099067: probe_libc:inet_pton_1: (3ffb7f4b940)
14b940 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
10e9c3 __GI_getaddrinfo+0xeb3 (inlined)
4397 main+0x737 (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230503081134.3372415-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull hotfixes from Andrew Morton:
"Five hotfixes.

Three are cc:stable, two pertain to merge window changes"

* tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
afs: fix the afs_dir_get_folio return value
nilfs2: do not write dirty data after degenerating to read-only
mm: do not reclaim private data from pinned page
nilfs2: fix infinite loop in nilfs_mdt_get_block()
mm/mmap/vma_merge: always check invariants

The allocated dmapool pages are never freed for the lifetime of the pool.
There is no need for the two level list+stack lookup for finding a free
block since nothing is ever removed from the list. Just use a simple
stack, reducing time complexity to constant.

The implementation inserts the stack linking elements and the dma handle
of the block within itself when freed. This means the smallest possible
dmapool block is increased to at most 16 bytes to accommodate these
fields, but there are no exisiting users requesting a dma pool smaller
than that anyway.

Removing the list has a significant change in performance. Using the
kernel's micro-benchmarking self test:

Before:

# modprobe dmapool_test
dmapool test: size:16 blocks:8192 time:57282
dmapool test: size:64 blocks:8192 time:172562
dmapool test: size:256 blocks:8192 time:789247
dmapool test: size:1024 blocks:2048 time:371823
dmapool test: size:4096 blocks:1024 time:362237

After:

# modprobe dmapool_test
dmapool test: size:16 blocks:8192 time:24997
dmapool test: size:64 blocks:8192 time:26584
dmapool test: size:256 blocks:8192 time:33542
dmapool test: size:1024 blocks:2048 time:9022
dmapool test: size:4096 blocks:1024 time:6045

The module test allocates quite a few blocks that may not accurately
represent how these pools are used in real life. For a more marco level
benchmark, running fio high-depth + high-batched on nvme, this patch shows
submission and completion latency reduced by ~100usec each, 1% IOPs
improvement, and perf record's time spent in dma_pool_alloc/free were
reduced by half.

[kbusch@kernel.org: push new blocks in ascending order]
Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com
Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Currently uring CMD operation relies on having large SQEs, but future
operations might want to use normal SQE.

The io_uring_cmd currently only saves the payload (cmd) part of the SQE,
but, for commands that use normal SQE size, it might be necessary to
access the initial SQE fields outside of the payload/cmd block. So,
saves the whole SQE other than just the pdu.

This changes slightly how the io_uring_cmd works, since the cmd
structures and callbacks are not opaque to io_uring anymore. I.e, the
callbacks can look at the SQE entries, not only, in the cmd structure.

The main advantage is that we don't need to create custom structures for
simple commands.

Creates io_uring_sqe_cmd() that returns the cmd private data as a null
pointer and avoids casting in the callee side.
Also, make most of ublk_drv's sqe->cmd priv structure into const, and use
io_uring_sqe_cmd() to get the private structure, removing the unwanted
cast. (There is one case where the cast is still needed since the
header->{len,addr} is updated in the private structure)

Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230504121856.904491-3-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Rework the compatibles of IPQ8074, SC7180, SC8180X and SM8150 as
compatible devices (same from Linux driver point of view). This allows
smaller of_device_id table in the Linux driver and smaller
allOf:if:then: constraints.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

* clk-imx: (25 commits)
clk: imx: imx8ulp: update clk flag for system critical clock
clk: imx: imx8ulp: Add tpm5 clock as critical gate clock
clk: imx: imx8ulp: keep MU0_B clock enabled always
clk: imx: imx8ulp: Add divider closest support to get more accurate clock rate
clk: imx: imx8ulp: Fix XBAR_DIVBUS and AD_SLOW clock parents
clk: imx: imx93: Add nic and A55 clk
dt-bindings: clock: imx93: add NIC, A55 and ARM PLL CLK
clk: imx: imx93: add mcore_booted module paratemter
clk: imx: fracn-gppll: Add 300MHz freq support for imx9
clk: imx: fracn-gppll: support integer pll
clk: imx: fracn-gppll: disable hardware select control
clk: imx: fracn-gppll: fix the rate table
clk: imx: imx8mp: change the 'nand_usdhc_bus' clock to non-critical
clk: imx: imx8mp: Add LDB root clock
dt-bindings: clock: imx8mp: Add LDB clock entry
clk: imx: imx8mp: correct DISP2 pixel clock type
clk: imx: drop duplicated macro
clk: imx: clk-gpr-mux: Provide clock name in error message
clk: imx: Let IMX8MN_CLK_DISP_PIXEL set parent rate
clk: imx8mm: Let IMX8MM_CLK_LCDIF_PIXEL set parent rate
...

Protect access of TCP_Server_Info::hostname when building the ipc tree
name as it might get freed in cifsd thread and thus causing an
use-after-free bug in __tree_connect_dfs_target(). Also, while at it,
update status of IPC tcon on success and then avoid any extra tree
connects.

Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Move Power10 feature, PPC_MODULE_FEATURE_P10, definition to be in
arch/powerpc/include/asm/cpufeature.h.

Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull cifs client fixes from Steve French:
"Two cifs/smb3 client fixes, one for stable:

- double lock fix for a cifs/smb1 reconnect path

- DFS prefixpath fix for reconnect when server moved"

* tag '6.3-rc5-smb3-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: double lock in cifs_reconnect_tcon()
cifs: sanitize paths in cifs_update_super_prepath.

Pick up the fixes (first 6 patches) from the DOE rework series from
Lukas for v6.3-rc.

Link: https://lore.kernel.org/all/cover.1678543498.git.lukas@wunner.de/

The logic in acpi_is_processor_usable() requires the online capable
bit be set for hotpluggable CPUs. The online capable bit has been
introduced in ACPI 6.3.

However, for ACPI revisions < 6.3 which do not support that bit, CPUs
should be reported as usable, not the other way around.

Reverse the check.

[ bp: Rewrite commit message. ]

Fixes: e2869bd7af60 ("x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC")
Suggested-by: Miguel Luis <miguel.luis@oracle.com>
Suggested-by: Boris Ostrovsky <boris.ovstrosky@oracle.com>
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: David R <david@unsolicited.net>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230327191026.3454-2-eric.devolder@oracle.com

When is_valid_tracepoint() returns 1, need to call put_events_file() to
free `dir_path`.

Fixes: 25a7d914274de386 ("perf parse-events: Use get/put_events_file()")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230421025953.173826-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Fix another case of an incorrect check for the returned 'folio' value
from __filemap_get_folio().

The failure case used to return NULL, but was changed by commit
66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio").

But in the meantime, commit ec108d3cc766 ("NFS: Convert readdir page
array functions to use a folio") added a new user of that function.

And my merge of the two did not fix this up correctly.

The ext4 merge had the same issue, but that one had been caught in
linux-next and got properly fixed while merging.

Fixes: 0127f25b5dfc ("Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs")
Cc: Anna Schumaker <anna@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Keep returning NULL on failure instead of letting an ERR_PTR escape to
callers that don't expect it.

Link: https://lkml.kernel.org/r/20230503154526.1223095-2-hch@lst.de
Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If debug is enabled, dmapool will poison the range, so no need to clear it
to 0 immediately before writing over it.

Link: https://lkml.kernel.org/r/20230126215125.4069751-11-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Create a simple helper that returns the size of the SQE. The SQE could
have two size, depending of the flags.

If IO_URING_SETUP_SQE128 flag is set, then return a double SQE,
otherwise returns the sizeof of io_uring_sqe (64 bytes).

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230504121856.904491-2-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add a compatible string for the MT6795 Helio X10 SoC using MT8173
binding and add a header for the MT6795's GCE mailbox.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

* clk-of:
clk: add missing of_node_put() in "assigned-clocks" property parsing

* clk-samsung:
clk: samsung: exynos850: Make PMU_ALIVE_PCLK critical
clk: samsung: Convert to platform remove callback returning void
clk: samsung: exynos5433: Extract PM support to common ARM64 layer
clk: samsung: Extract parent clock enabling to common function
clk: samsung: Extract clocks registration to common function
clk: samsung: exynos850: Add AUD and HSI main gate clocks
clk: samsung: exynos850: Implement CMU_G3D domain
clk: samsung: clk-pll: Implement pll0818x PLL type
clk: samsung: Set dev in samsung_clk_init()
clk: samsung: Don't pass reg_base to samsung_clk_register_pll()
clk: samsung: Remove np argument from samsung_clk_init()
dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks
dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D

* clk-rockchip:
clk: rockchip: rk3588: make gate linked clocks critical
clk: rockchip: rk3399: allow clk_cifout to force clk_cifout_src to reparent

* clk-qcom: (57 commits)
clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
clk: qcom: add the GPUCC driver for sa8775p
dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
clk: qcom: Add Global Clock Controller driver for IPQ9574
dt-bindings: clock: Add ipq9574 clock and reset definitions
clk: qcom: gpucc-sm6375: Configure CX_GDSC disable wait value
clk: qcom: gcc-sm6115: Mark RCGs shared where applicable
clk: qcom: dispcc-qcm2290: Add MDSS_CORE reset
dt-bindings: clock: dispcc-qcm2290: Add MDSS_CORE reset
clk: qcom: apss-ipq-pll: add support for IPQ5332
dt-bindings: clock: qcom,a53pll: add IPQ5332 compatible
clk: qcom: apss-ipq-pll: refactor the driver to accommodate different PLL types
dt-bindings: mailbox: qcom,apcs-kpss-global: fix SDX55 'if' match
dt-bindings: mailbox: qcom,apcs-kpss-global: correct SDX55 clocks
...

Pull i.MX clk driver updates from Abel Vesa:

- Add clock generic devm_clk_hw_register_gate_parent_data.
- Add audiomix block control for i.MX8MP.
- Add support for determine_rate to composite-8m.
- Add new macro for composite-8m to allow custom flags.
- Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate.
- Provide clock name in error message for clk-gpr-mux on get parent
failure.
- Drop duplicate imx_clk_mux_flags macro.
- Register the i.MX8MP Media Disp2 Pix clock as bus clock.
- Add Media LDB root clock to i.MX8MP.
- Make i.MX8MP nand_usdhc_bus clock as non-critical.
- Fix the rate table for fracn-gppll.
- Disable HW control for the fracn-gppll in order to be controlled by
register write.
- Add support for interger PLL in fracn-gppll.
- Add mcore_booted module parameter to i.MX93 provider.
- Add NIC, A55 and ARM PLL clocks to i.MX93.
- Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents.
- Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to
get more accurate clock rates.
- Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical.
- Update some of the critical clocks flags to allow glitchless
on-the-fly rate change.

* tag 'clk-imx-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux: (25 commits)
clk: imx: imx8ulp: update clk flag for system critical clock
clk: imx: imx8ulp: Add tpm5 clock as critical gate clock
clk: imx: imx8ulp: keep MU0_B clock enabled always
clk: imx: imx8ulp: Add divider closest support to get more accurate clock rate
clk: imx: imx8ulp: Fix XBAR_DIVBUS and AD_SLOW clock parents
clk: imx: imx93: Add nic and A55 clk
dt-bindings: clock: imx93: add NIC, A55 and ARM PLL CLK
clk: imx: imx93: add mcore_booted module paratemter
clk: imx: fracn-gppll: Add 300MHz freq support for imx9
clk: imx: fracn-gppll: support integer pll
clk: imx: fracn-gppll: disable hardware select control
clk: imx: fracn-gppll: fix the rate table
clk: imx: imx8mp: change the 'nand_usdhc_bus' clock to non-critical
clk: imx: imx8mp: Add LDB root clock
dt-bindings: clock: imx8mp: Add LDB clock entry
clk: imx: imx8mp: correct DISP2 pixel clock type
clk: imx: drop duplicated macro
clk: imx: clk-gpr-mux: Provide clock name in error message
clk: imx: Let IMX8MN_CLK_DISP_PIXEL set parent rate
clk: imx8mm: Let IMX8MM_CLK_LCDIF_PIXEL set parent rate
...