tjh.dev
commits
Pull USB fixes from Greg KH:
"Here are some small USB fixes, and bunch of reverts for 6.19-rc3.
Included in here are:
- reverts of some typec ucsi driver changes that had a lot of
regression reports after -rc1. Let's just revert it all for now and
it will come back in a way that is better tested.
- other typec bugfixes
- usb-storage quirk fixups
- dwc3 driver fix
- other minor USB fixes for reported problems.
All of these have passed 0-day testing and individual testing"
* tag 'usb-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
Revert "usb: typec: ucsi: Update UCSI structure to have message in and message out fields"
Revert "usb: typec: ucsi: Add support for message out data structure"
Revert "usb: typec: ucsi: Enable debugfs for message_out data structure"
Revert "usb: typec: ucsi: Add support for SET_PDOS command"
Revert "usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common"
Revert "usb: typec: ucsi: Get connector status after enable notifications"
usb: ohci-nxp: clean up probe error labels
usb: gadget: lpc32xx_udc: clean up probe error labels
usb: ohci-nxp: fix device leak on probe failure
usb: phy: isp1301: fix non-OF device reference imbalance
usb: gadget: lpc32xx_udc: fix clock imbalance in error path
usb: typec: ucsi: Get connector status after enable notifications
usb: usb-storage: Maintain minimal modifications to the bcdDevice range.
usb: dwc3: of-simple: fix clock resource leak in dwc3_of_simple_probe
usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common
USB: lpc32xx_udc: Fix error handling in probe
usb: typec: altmodes/displayport: Drop the device reference in dp_altmode_probe()
usb: phy: fsl-usb: Fix use-after-free in delayed work during device removal
usb: renesas_usbhs: Fix a resource leak in usbhs_pipe_malloc()
usb: typec: ucsi: huawei-gaokin: add DRM dependency
...
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for some reported issues.
Included in here are:
- serial sysfs fwnode fix that was much reported
- sh-sci driver fix
- serial device init bugfix
- 8250 bugfix
- xilinx_uartps bugfix
All of these have passed 0-day testing and individual testing"
* tag 'tty-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: xilinx_uartps: fix rs485 delay_rts_after_send
serial: sh-sci: Check that the DMA cookie is valid
serial: core: Fix serial device initialization
serial: 8250: longson: Fix NULL vs IS_ERR() bug in probe
serial: core: Restore sysfs fwnode information
Johan Hovold <johan@kernel.org> says:
The new buffer management code has not been tested or reviewed properly
and breaks boot of machines like the Lenovo ThinkPad X13s.
Fixing this will require designing a proper interface for managing these
transactions, something which most likely involves reverting most of the
offending commit anyway.
Revert the broken code to fix the regression and let Intel come up with
a properly tested implementation for a later kernel.
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull firewire fix from Takashi Sakamoto:
"A fix for PCI driver for Texas Instruments PCILyx series.
The driver had a bug where it allocated a DMA-coherent buffer of 16 KB
but released it using PAGE_SIZE. This disproportion was reported in
2020, but the fix was never merged. It is finally resolved"
* tag 'firewire-fixes-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: nosy: Fix dma_free_coherent() size
RTS line control with delay should be triggered when there is no more
bytes in kfifo and hardware buffer is empty. Without this patch RTS
control is scheduled right after feeding hardware buffer and this is too
early.
RTS line may change state before hardware buffer is empty.
With this patch delayed RTS state change is triggered when function
cdns_uart_handle_tx is called from cdns_uart_isr on
CDNS_UART_IXR_TXEMPTY exactly when hardware completed transmission
Fixes: fccc9d9233f9 ("tty: serial: uartps: Add rs485 support to uartps driver")
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20251221103221.1971125-1-jakub.turek@elsta.tech
Signed-off-by: Jakub Turek <jakub.turek@elsta.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 14ad4c10d5bdd413ff9a914260e89b5f54b7a2c7.
The originally offending commit will be reverted instead of this fix up
at this point in time, so revert this fix.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: stable <stable@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Fixes: 14ad4c10d5bd ("usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common")
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 3e082978c33151d576694deac8abde021ea669a8.
The new buffer management code has not been tested or reviewed properly
and breaks boot of machines like the Lenovo ThinkPad X13s:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
CPU: 0 UID: 0 PID: 813 Comm: kworker/0:3 Not tainted 6.19.0-rc2 #26 PREEMPT
Hardware name: LENOVO 21BYZ9SRUS/21BYZ9SRUS, BIOS N3HET87W (1.59 ) 12/05/2023
Workqueue: events ucsi_handle_connector_change [typec_ucsi]
Call trace:
ucsi_sync_control_common+0xe4/0x1ec [typec_ucsi] (P)
ucsi_run_command+0xcc/0x194 [typec_ucsi]
ucsi_send_command_common+0x84/0x2a0 [typec_ucsi]
ucsi_get_connector_status+0x48/0x78 [typec_ucsi]
ucsi_handle_connector_change+0x5c/0x4f4 [typec_ucsi]
process_one_work+0x208/0x60c
worker_thread+0x244/0x388
The new code completely ignores concurrency so that the message length
can be updated while a transaction is ongoing. In the above case, the
length ends up being modified by another thread while processing an ack
so that the NULL cci pointer is dereferenced.
Fixing this will require designing a proper interface for managing these
transactions, something which most likely involves reverting most of the
offending commit anyway.
Revert the broken code to fix the regression and let Intel come up with
a properly tested implementation for a later kernel.
Fixes: 3e082978c331 ("usb: typec: ucsi: Update UCSI structure to have message in and message out fields")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-5-johan@kernel.org
Pull RISC-V updates from Paul Walmsley:
"Nothing exotic here; these are the cleanup and new ISA extension
probing patches (not including CFI):
- Add probing and userspace reporting support for the standard RISC-V
ISA extensions Zilsd and Zclsd, which implement load/store dual
instructions on RV32
- Abstract the register saving code in setup_sigcontext() so it can
be used for stateful RISC-V ISA extensions beyond the vector
extension
- Add the SBI extension ID and some initial data structure
definitions for the RISC-V standard SBI debug trigger extension
- Clean up some code slightly: change some page table functions to
avoid atomic operations oinn !SMP and to avoid unnecessary casts to
atomic_long_t; and use the existing RISCV_FULL_BARRIER macro in
place of some open-coded 'fence rw,rw' instructions"
* tag 'riscv-for-linus-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add SBI debug trigger extension and function ids
riscv/atomic.h: use RISCV_FULL_BARRIER in _arch_atomic* function.
riscv: hwprobe: export Zilsd and Zclsd ISA extensions
riscv: add ISA extension parsing for Zilsd and Zclsd
dt-bindings: riscv: add Zilsd and Zclsd extension descriptions
riscv: mm: use xchg() on non-atomic_long_t variables, not atomic_long_xchg()
riscv: mm: ptep_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: mm: pmdp_huge_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: signal: abstract header saving for setup_sigcontext
It looks like the buffer allocated and mapped in add_card() is done
with size RCV_BUFFER_SIZE which is 16 KB and 4KB.
Fixes: 286468210d83 ("firewire: new driver: nosy - IEEE 1394 traffic sniffer")
Co-developed-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Co-developed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20251216165420.38355-2-fourier.thomas@gmail.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The driver updates struct sci_port::tx_cookie to zero right before the TX
work is scheduled, or to -EINVAL when DMA is disabled.
dma_async_is_complete(), called through dma_cookie_status() (and possibly
through dmaengine_tx_status()), considers cookies valid only if they have
values greater than or equal to 1.
Passing zero or -EINVAL to dmaengine_tx_status() before any TX DMA
transfer has started leads to an incorrect TX status being reported, as the
cookie is invalid for the DMA subsystem. This may cause long wait times
when the serial device is opened for configuration before any TX activity
has occurred.
Check that the TX cookie is valid before passing it to
dmaengine_tx_status().
Fixes: 7cc0e0a43a91 ("serial: sh-sci: Check if TX data was written to device in .tx_empty()")
Cc: stable <stable@kernel.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251217135759.402015-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 5106dbab44fba8ec6dede3f4e75d17f5aa777ec8.
There are reported issues in this file, so revert the commit for now so
that the original offending changes can be reverted and working systems
can be restored. This can come back at a later time if it is rebased
yet-again (sorry.)
Cc: stable <stable@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Fixes: 5106dbab44fb ("usb: typec: ucsi: Get connector status after enable notifications")
Cc: Kenneth R. Crudup <kenny@panix.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Hsin-Te Yuan <yuanhsinte@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit db0028637cc832add6d87564fcc2ebb12781b046.
The new buffer management code that this feature relies on is broken so
revert for now.
As for the in buffer, nothing prevents the out message size and buffer
from being modified while the message is being processed due to lack of
serialisation.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-4-johan@kernel.org
Pull powerpc fixes from Madhavan Srinivasan:
- Fix for kexec warning due to SMT disable or partial SMT enabled
- Handle font bitmap pointer with reloc_offset to fix boot crash
- Fix to enable cpuidle state for Power11
- Couple of misc fixes
Thanks to Aboorva Devarajan, Aditya Bodkhe, Cedar Maxwell, Christian
Zigotzky, Christophe Leroy, Christophe Leroy (CS GROUP), Finn Thain,
Gopi Krishna Menon, Guenter Roeck, Jan Stancek, Joe Lawrence, Josh
Poimboeuf, Justin M. Forbes, Madadi Vineeth Reddy, Naveen N Rao (AMD),
Nysal Jan K.A., Sachin P Bappalige, Samir M, Sourabh Jain, Srikar
Dronamraju, and Stan Johnson
* tag 'powerpc-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Restore disabling of interrupts at interrupt/syscall exit
powerpc/powernv: Enable cpuidle state detection for POWER11
powerpc: Add reloc_offset() to font bitmap pointer used for bootx_printf()
powerpc/tools: drop `-o pipefail` in gcc check scripts
selftests/powerpc/pmu/: Add check_extended_reg_test to .gitignore
powerpc/kexec: Enable SMT before waking offline CPUs
Debug trigger extension is an SBI extension to support native debugging
in S-mode and VS-mode. This patch adds the extension and the function
IDs defined by the extension.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Link: https://patch.msgid.link/20250710125231.653967-2-hchauhan@ventanamicro.com
[pjw@kernel.org: updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
During restoring sysfs fwnode information the information of_node_reused
was dropped. This was previously set by device_set_of_node_from_dev().
Add it back manually
Fixes: 24ec03cc5512 ("serial: core: Restore sysfs fwnode information")
Cc: stable <stable@kernel.org>
Suggested-by: Cosmin Tanislav <demonsingur@gmail.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Michael Walle <mwalle@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Cosmin Tanislav <demonsingur@gmail.com>
Link: https://patch.msgid.link/20251219152813.1893982-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Error labels should be named after what they do rather than after from
where they are jumped to.
Rename the probe error labels for consistency and to improve
readability.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 775fae520e6ae62c393a8daf42dc534f09692f3f.
The new buffer management code that this relies on is broken so revert
for now.
It also looks like the error handling needs some more thought as the
message out size is not reset on errors.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-3-johan@kernel.org
Pull spi fixes from Mark Brown:
"We've got more fixes here for the Cadence QSPI controller, this time
fixing some issues that come up when working with slower flashes on
some platforms plus a general race condition.
We also add support for the Allwinner A523, this is just some new
compatibles"
* tag 'spi-fix-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Improve CQSPI_SLOW_SRAM quirk if flash is slow
spi: cadence-quadspi: Prevent lost complete() call during indirect read
spi: sun6i: Support A523's SPI controllers
spi: dt-bindings: sun6i: Add compatibles for A523's SPI controllers
Commit 2997876c4a1a ("powerpc/32: Restore clearing of MSR[RI] at
interrupt/syscall exit") delayed clearing of MSR[RI], but missed that
both MSR[RI] and MSR[EE] are cleared at the same time, so the commit
also delayed the disabling of interrupts, leading to unexpected
behaviour.
To fix that, mostly revert the blamed commit and restore the clearing
of MSR[RI] in interrupt_exit_kernel_prepare() instead. For 8xx it
implies adding a synchronising instruction after the mtspr in order to
make sure no instruction counter interrupt (used for perf events) will
fire just after clearing MSR[RI].
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Closes: https://lore.kernel.org/all/4d0bd05d-6158-1323-3509-744d3fbe8fc7@xenosoft.de/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/6b05eb1c-fdef-44e0-91a7-8286825e68f1@roeck-us.net/
Fixes: 2997876c4a1a ("powerpc/32: Restore clearing of MSR[RI] at interrupt/syscall exit")
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/585ea521b2be99d293b539bbfae148366cfb3687.1766146895.git.chleroy@kernel.org
Replace the same code with the pre-defined macro
RISCV_FULL_BARRIER to simplify the code.
Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn>
Link: https://patch.msgid.link/20251120095831.64211-1-min_halo@163.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Pull Coccinelle fixes from Julia Lawall:
"These fix a typo and make the coccicheck script more robust by
ensuring that only compatible semantic patches are executed for the
chosen mode"
* tag 'coccinelle-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Coccinelle: pm_runtime: Fix typo in report message
scripts: coccicheck: filter *.cocci files by MODE
The devm_platform_get_and_ioremap_resource() function never returns
NULL, it returns error pointers. Fix the error checking to match.
Fixes: 25e95d763176 ("serial: 8250: Add Loongson uart driver support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aSsIa3KdAlXh5uQC@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Error labels should be named after what they do rather than after from
where they are jumped to.
Rename the probe error labels for consistency and to improve
readability.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 1b474ee01fbb73b1365adbf9b3067f7375e471ee.
The new buffer management code that this feature relies on is broken so
revert for now.
The interface for writing data and support for UCSI_SET_PDOS looks like
it could use some more thought as well.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-2-johan@kernel.org
Pull regulator fixes from Mark Brown:
"A couple of fixes from Thomas, making the UAPI headers more robustly
correct and ensuring they are covered by checkpatch, and one from
Andreas fixing an update for a change to the DT bindings that I missed
was requested during bindings review in the newly added fp9931 driver"
* tag 'regulator-fix-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fp9931: fix regulator node pointer
regulator: Add UAPI headers to MAINTAINERS
regulator: uapi: Use UAPI integer type
Merge series from Mateusz Litwin <mateusz.litwin@nokia.com>:
On the Stratix10 platform, indirect reads can become very slow due to lost
interrupts and/or missed `complete()` calls, causing
`wait_for_completion_timeout()` to expire.
Three issues were identified:
1) A race condition exists between the read loop and IRQ `complete()`
call:
An IRQ can call `complete()` after the inner loop ends, but before
`reinit_completion()`, losing the completion event and leading to
`wait_for_completion_timeout()` expire. This function will not return
an error because `bytes_to_read` > 0 (indicating data is already in the
FIFO) and the final `ret` value is overwritten by
`cqspi_wait_for_bit()` return value (indicating request completion),
masking the timeout.
For test purpose, logging was added to print the count of timeouts and
the outer loop count.
$ dd if=/dev/mtd0 of=/dev/null bs=64M count=1
[ 2232.925219] cadence-qspi ff8d2000.spi: Indirect read error timeout
(1) loop (12472)
[ 2236.200391] cadence-qspi ff8d2000.spi: Indirect read error timeout
(1) loop (12460)
[ 2239.482836] cadence-qspi ff8d2000.spi: Indirect read error timeout
(5) loop (12450)
This indicates that such an event is rare, but possible.
Tested on the Stratix10 platform.
2) The quirk assumes the indirect read path never leaves the inner loop on
SoCFPGA. This assumption is incorrect when using slow flash. Disabling
IRQs in the inner loop can cause lost interrupts.
3) The `CQSPI_SLOW_SRAM` quirk disables `CQSPI_REG_IRQ_IND_COMP` (indirect
completion) interrupt, relying solely on the `CQSPI_REG_IRQ_WATERMARK`
(FIFO watermark) interrupt. For small transfers sizes, the final data
read might not fill the FIFO sufficiently to trigger the watermark,
preventing completion and leading to wait_for_completion_timeout()
expiration.
Two patches have been prepared to resolve these issues.
- [1/2] spi: cadence-quadspi: Prevent lost complete() call during
indirect read
Moving `reinit_completion()` before the inner loop prevents a race
condition. This might cause a premature IRQ complete() call to occur;
however, in the worst case, this will result in a spurious wakeup and
another wait cycle, which is preferable to waiting for a timeout.
- [2/2] spi: cadence-quadspi: Improve CQSPI_SLOW_SRAM quirk if flash is
slow
Re-enabling `CQSPI_REG_IRQ_IND_COMP` interrupt resolves the problem for
small reads and removes the disabling of interrupts, addressing the
issue with lost interrupts. This marginally increases the IRQ count.
Test:
$ dd if=/dev/mtd0 of=/dev/null bs=1M count=64
Results from the Stratix10 platform with mt25qu02g flash.
FIFO size in all tests: 128
Serviced interrupt call counts:
Without `CQSPI_SLOW_SRAM` quirk: 16 668 850
With `CQSPI_SLOW_SRAM` quirk: 204 176
With `CQSPI_SLOW_SRAM` and this patch: 224 528
Patch 2/2: Delivers a substantial read‑performance improvement for the
Cadence QSPI controller on the Stratix10 platform. Patch 1/2: Applies to
all platforms and should yield a modest performance gain, most noticeable
with large `CQSPI_READ_TIMEOUT_MS` values and workloads dominated by many
small reads.
Extend cpuidle state detection to POWER11 by updating the PVR check.
This ensures POWER11 correctly recognizes supported stop states,
similar to POWER9 and POWER10.
Without Patch: (Power11 - PowerNV systems)
CPUidle driver: powernv_idle
CPUidle governor: menu
analyzing CPU 927:
Number of idle states: 1
Available idle states: snooze
snooze:
Flags/Description: snooze
Latency: 0
Usage: 251631
Duration: 207497715900
--
With Patch: (Power11 - PowerNV systems)
CPUidle driver: powernv_idle
CPUidle governor: menu
analyzing CPU 959:
Number of idle states: 4
Available idle states: snooze stop0_lite stop0 stop3
snooze:
Flags/Description: snooze
Latency: 0
Usage: 2
Duration: 33
stop0_lite:
Flags/Description: stop0_lite
Latency: 1
Usage: 1
Duration: 52
stop0:
Flags/Description: stop0
Latency: 10
Usage: 13
Duration: 1920
stop3:
Flags/Description: stop3
Latency: 45
Usage: 381
Duration: 21638478
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Reviewed-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250908085123.216780-1-aboorvad@linux.ibm.com
Export Zilsd and Zclsd ISA extensions through hwprobe.
Signed-off-by: Pincheng Wang <pincheng.plct@isrc.iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://patch.msgid.link/20250826162939.1494021-4-pincheng.plct@isrc.iscas.ac.cn
[pjw@kernel.org: fixed whitespace; updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Pull input fixes from Dmitry Torokhov:
- a quirk for i8042 to better handle another TUXEDO model
- a quirk to atkbd to handle incorcet behavior of HONOR FMB-P internal
keyboard
- a definition for a new ABS_SND_PROFILE event
- fixes to alps and lkkbd drivers to reliably shut down pending work on
removal
- a fix to apple_z2 driver tightening input report parsing
- a fix for "off-by-one" error when validating config in ti_am335x_tsc
driver
- addition of CRKD Guitars device IDs to xpad driver.
* tag 'input-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ti_am335x_tsc - fix off-by-one error in wire_order validation
Input: xpad - add support for CRKD Guitars
Input: add ABS_SND_PROFILE
Input: apple_z2 - fix reading incorrect reports after exiting sleep
Input: alps - fix use-after-free bugs caused by dev3_register_work
Input: i8042 - add TUXEDO InfinityBook Max Gen10 AMD to i8042 quirk table
Input: atkbd - skip deactivate for HONOR FMB-P's internal keyboard
Input: lkkbd - disable pending work before freeing device
s/Unecessary/Unnecessary/
Reviewed-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
The change that restores sysfs fwnode information does it only for OF cases.
Update the fix to cover all possible types of fwnodes.
Fixes: d36f0e9a0002 ("serial: core: restore of_node information in sysfs")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251127163650.2942075-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the reference taken when looking up the PHY I2C device
during probe on probe failure (e.g. probe deferral) and on driver
unbind.
Fixes: 73108aa90cbf ("USB: ohci-nxp: Use isp1301 driver")
Cc: stable@vger.kernel.org # 3.5
Reported-by: Ma Ke <make24@iscas.ac.cn>
Link: https://lore.kernel.org/lkml/20251117013428.21840-1-make24@iscas.ac.cn/
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lpc32xx_udc_probe() acquires an i2c_client reference through
isp1301_get_client() but fails to release it in both error handling
paths and the normal removal path. This could result in a reference
count leak for the I2C device, preventing proper cleanup and potentially
leading to resource exhaustion. Add put_device() to release the
reference in the probe failure path and in the remove function.
Calling path: isp1301_get_client() -> of_find_i2c_device_by_node() ->
i2c_find_device_by_fwnode(). As comments of i2c_find_device_by_fwnode()
says, 'The user must call put_device(&client->dev) once done with the
i2c client.'
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20251215020931.15324-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull drm fixes from Dave Airlie:
"Post overeating fixes, only msm for this week has anything, so quiet
as expected.
msm:
- GPU:
- Fix crash on a7xx GPUs not supporting IFPC
- Fix perfcntr use with IFPC
- Concurrent binning fix
- DPU:
- Fixed DSC and SSPP fetching issues
- Switched to scnprint instead of snprintf
- Added missing NULL checks in pingpong code"
* tag 'drm-fixes-2025-12-27' of https://gitlab.freedesktop.org/drm/kernel: (27 commits)
drm/msm: Replace unsafe snprintf usage with scnprintf
drm/msm/dpu: Add missing NULL pointer check for pingpong interface
Revert "drm/msm/dpu: Enable quad-pipe for DSC and dual-DSI case"
Revert "drm/msm/dpu: support plane splitting in quad-pipe case"
drm/msm: msm_iommu.c: fix all kernel-doc warnings
drm/msm: msm_gpu.h: fix all kernel-doc warnings
drm/msm: msm_gem_vma.c: fix all kernel-doc warnings
drm/msm: msm_fence.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_wb.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_vbif.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_top.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_sspp.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_pingpong.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_merge3d.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_lm.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_intf.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_dspp.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_dsc.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_cwb.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_ctl.h: fix all kernel-doc warnings
...
Sync the driver with the binding. During review process a regulators
subnode was requested but neither driver nor test setup was updated.
Fixes: 12d821bd13d4 ("regulator: Add FP9931/JD9930 driver")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251223-fp9931-fix-v1-1-b19b4c1e7056@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
The A523 has four SPI controllers. One of them supports MIPI DBI mode
in addition to standard SPI.
Compared to older generations, this newer controller now has a combined
counter for the RX FIFO ad buffer levels. In older generations, the
RX buffer level was a separate bitfield in the FIFO status register.
In practice this difference is negligible. The buffer is mostly
invisible to the implementation. If programmed I/O transfers are limited
to the FIFO size, then the contents of the buffer seem to always be
flushed over to the FIFO. For DMA, the DRQ trigger levels are only tied
to the FIFO levels. In all other aspects, the controller is the same as
the one in the R329.
Support the standard SPI mode controllers using the settings for R329.
DBI is left out as there currently is no infrastructure for enabling a
DBI host controller, as was the case for the R329.
Also fold the entry for the R329 to make the style consistent.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251221110513.1850535-3-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
CQSPI_SLOW_SRAM quirk on the Stratix10 platform causes fewer interrupts,
but also causes timeouts if a small block is used or if flash devices are
slower than or equal in speed to SRAM's read operations. Adding the
CQSPI_REG_IRQ_IND_COMP interrupt would resolve the problem for small
reads, and removing the disabling of interrupts would resolve the issue
with lost interrupts.
This marginally increases IRQ count. Tests show that this will cause only
a few percent more interrupts.
Test:
$ dd if=/dev/mtd0 of=/dev/null bs=1M count=64
Results from the Stratix10 platform with mt25qu02g flash.
FIFO size in all tests: 128
Serviced interrupt call counts:
Without CQSPI_SLOW_SRAM quirk: 16 668 850
With CQSPI_SLOW_SRAM quirk: 204 176
With CQSPI_SLOW_SRAM and this commit: 224 528
Signed-off-by: Mateusz Litwin <mateusz.litwin@nokia.com>
Link: https://patch.msgid.link/20251218-cqspi_indirect_read_improve-v2-2-396079972f2a@nokia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since Linux v6.7, booting using BootX on an Old World PowerMac produces
an early crash. Stan Johnson writes, "the symptoms are that the screen
goes blank and the backlight stays on, and the system freezes (Linux
doesn't boot)."
Further testing revealed that the failure can be avoided by disabling
CONFIG_BOOTX_TEXT. Bisection revealed that the regression was caused by
a change to the font bitmap pointer that's used when btext_init() begins
painting characters on the display, early in the boot process.
Christophe Leroy explains, "before kernel text is relocated to its final
location ... data is addressed with an offset which is added to the
Global Offset Table (GOT) entries at the start of bootx_init()
by function reloc_got2(). But the pointers that are located inside a
structure are not referenced in the GOT and are therefore not updated by
reloc_got2(). It is therefore needed to apply the offset manually by using
PTRRELOC() macro."
Cc: stable@vger.kernel.org
Link: https://lists.debian.org/debian-powerpc/2025/10/msg00111.html
Link: https://lore.kernel.org/linuxppc-dev/d81ddca8-c5ee-d583-d579-02b19ed95301@yahoo.com/
Reported-by: Cedar Maxwell <cedarmaxwell@mac.com>
Closes: https://lists.debian.org/debian-powerpc/2025/09/msg00031.html
Bisected-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 0ebc7feae79a ("powerpc: Use shared font data")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/22b3b247425a052b079ab84da926706b3702c2c7.1762731022.git.fthain@linux-m68k.org
Add parsing for Zilsd and Zclsd ISA extensions which were ratified in
commit f88abf1 ("Integrating load/store pair for RV32 with the
main manual") of the riscv-isa-manual.
Signed-off-by: Pincheng Wang <pincheng.plct@isrc.iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://patch.msgid.link/20250826162939.1494021-3-pincheng.plct@isrc.iscas.ac.cn
[pjw@kernel.org: cleaned up checkpatch issues, whitespace; updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Pull i2c fixes from Wolfram Sang:
- bcm, pxa, rcar: fix void-pointer-to-enum-cast warning
- new hardware IDs / DT bindings for
- Intel Nova Lake-S
- Mobileye
- Qualcomm SM8750
* tag 'i2c-for-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: qcom-cci: Document SM8750 compatible
i2c: i801: Add support for Intel Nova Lake-S
dt-bindings: i2c: dw: Add Mobileye I2C controllers
i2c: rcar: Fix Wvoid-pointer-to-enum-cast warning
i2c: pxa: Fix Wvoid-pointer-to-enum-cast warning
i2c: bcm-iproc: Fix Wvoid-pointer-to-enum-cast warning
The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows
wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds
access when used as index in 'config_pins[wire_order[i]]'.
Since config_pins has 4 elements (indices 0-3), the valid range for
wire_order should be 0-3. Fix the off-by-one error by using >= instead
of > in the validation check.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://patch.msgid.link/20251114062817.852698-1-junjie.cao@intel.com
Fixes: bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Enhance the coccicheck script to filter *.cocci files based on the
specified MODE (e.g., report, patch). This ensures that only compatible
semantic patch files are executed, preventing errors such as:
"virtual rule report not supported"
This error occurs when a .cocci file does not define a 'virtual <MODE>'
rule, yet is executed in that mode.
For example:
make coccicheck M=drivers/hwtracing/coresight/ MODE=report
In this case, running "secs_to_jiffies.cocci" would trigger the error
because it lacks support for 'report' mode. With this change, such files
are skipped automatically, improving robustness and developer
experience.
Signed-off-by: Songwei Chai <quic_songchai@quicinc.com>
Reviewed-by: Julia Lawall <Julia.Lawall@inria.fr>
A recent change fixing a device reference leak in a UDC driver
introduced a potential use-after-free in the non-OF case as the
isp1301_get_client() helper only increases the reference count for the
returned I2C device in the OF case.
Increment the reference count also for non-OF so that the caller can
decrement it unconditionally.
Note that this is inherently racy just as using the returned I2C device
is since nothing is preventing the PHY driver from being unbound while
in use.
Fixes: c84117912bdd ("USB: lpc32xx_udc: Fix error handling in probe")
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In error paths, call typec_altmode_put_plug() to drop the device reference
obtained by typec_altmode_get_plug().
Fixes: 71ba4fe56656 ("usb: typec: altmodes/displayport: add SOP' support")
Cc: stable <stable@kernel.org>
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251206070445.190770-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull SCSI fixes from James Bottomley:
"Three HBA driver and one upper level driver (sg) fix.
The sg change is the largest, but that results mostly from moving code
to avoid the described race condition"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Add ufshcd_update_evt_hist() for UFS suspend error
scsi: sg: Fix occasional bogus elapsed time that exceeds timeout
scsi: mpi3mr: Read missing IOCFacts flag for reply queue full overflow
scsi: scsi_debug: Fix atomic write enable module param description
Fixes for v6.19:
GPU:
- Fix crash on a7xx GPUs not supporting IFPC
- Fix perfcntr use with IFPC
- Concurrent binning fix
DPU:
- Fixed DSC and SSPP fetching issues
- Switched to scnprint instead of snprintf
- Added missing NULL checks in pingpong code
Also documentation fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV01jcLLChsFtmqc4VDNoQ2ic2q+d86n3wdoSUdmW6xaSdQ@mail.gmail.com
The regulator UAPI headers were missing an entry in MAINTAINERS, add it.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20251222-maintainers-regulator-v1-1-7572390fdf1b@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The A523 has four SPI controllers. One of them supports MIPI DBI mode
in addition to standard SPI.
Compared to older generations, this newer controller now has a combined
counter for the RX FIFO ad buffer levels. In older generations, the
RX buffer level was a separate bitfield in the FIFO status register.
In practice this difference is negligible. The buffer is mostly
invisible to the implementation. If programmed I/O transfers are limited
to the FIFO size, then the contents of the buffer seem to always be
flushed over to the FIFO. For DMA, the DRQ trigger levels are only tied
to the FIFO levels. In all other aspects, the controller is the same as
the one in the R329.
Add new compatible strings for the new controllers.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251221110513.1850535-2-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A race condition exists between the read loop and IRQ `complete()` call.
An interrupt could call the complete() between the inner loop and
reinit_completion(), potentially losing the completion event and causing
an unnecessary timeout. Moving reinit_completion() before the loop
prevents this. A premature signal will only result in a spurious wakeup
and another wait cycle, which is preferable to waiting for a timeout.
Signed-off-by: Mateusz Litwin <mateusz.litwin@nokia.com>
Link: https://patch.msgid.link/20251218-cqspi_indirect_read_improve-v2-1-396079972f2a@nokia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: 0f71dcfb4aef ("powerpc/ftrace: Add support for -fpatchable-function-entry")
Fixes: b71c9ffb1405 ("powerpc: Add arch/powerpc/tools directory")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Fixes: 8c50b72a3b4f ("powerpc/ftrace: Add Kconfig & Make glue for mprofile-kernel")
Fixes: abba759796f9 ("powerpc/kbuild: move -mprofile-kernel check to Kconfig")
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/cc6cdd116c3ad9d990df21f13c6d8e8a83815bbd.1758641374.git.jstancek@redhat.com
Add descriptions for the Zilsd (Load/Store pair instructions) and
Zclsd (Compressed Load/Store pair instructions) ISA extensions
which were ratified in commit f88abf1 ("Integrating load/store
pair for RV32 with the main manual") of the riscv-isa-manual.
Signed-off-by: Pincheng Wang <pincheng.plct@isrc.iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250826162939.1494021-2-pincheng.plct@isrc.iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Pull x86 fixes from Ingo Molnar:
- Fix FPU core dumps on certain CPU models
- Fix htmldocs build warning
- Export TLB tracing event name via header
- Remove unused constant from <linux/mm_types.h>
- Fix comments
- Fix whitespace noise in documentation
- Fix variadic structure's definition to un-confuse UBSAN
- Fix posted MSI interrupts irq_retrigger() bug
- Fix asm build failure with older GCC builds
* tag 'x86-urgent-2025-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Fix old GCC compile fails
x86/msi: Make irq_retrigger() functional for posted MSI
x86/platform/uv: Fix UBSAN array-index-out-of-bounds
mm: Remove tlb_flush_reason::NR_TLB_FLUSH_REASONS from <linux/mm_types.h>
x86/mm/tlb/trace: Export the TLB_REMOTE_WRONG_CPU enum in <trace/events/tlb.h>
x86/sgx: Remove unmatched quote in __sgx_encl_extend function comment
x86/boot/Documentation: Fix whitespace noise in boot.rst
x86/fpu: Fix FPU state core dump truncation on CPUs with no extended xfeatures
x86/boot/Documentation: Fix htmldocs build warning due to malformed table in boot.rst
Add SM8750 compatible consistent with CAMSS CCI interfaces.
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251126-add-support-for-camss-on-sm8750-v1-1-646fee2eb720@oss.qualcomm.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Add support for various CRKD Guitar Controllers.
Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com>
Link: https://patch.msgid.link/20251129073720.2750-2-sanjay.govind9@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull ata fix from Damien Le Moal:
- Disable link power management (LPM) for a Seagate drive that is
misbehaving when LPM is enabled
* tag 'ata-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Disable LPM on ST2000DM008-2FR102
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
A recent change fixing a device reference leak introduced a clock
imbalance by reusing an error path so that the clock may be disabled
before having been enabled.
Note that the clock framework allows for passing in NULL clocks so there
is no risk for a NULL pointer dereference.
Also drop the bogus I2C client NULL check added by the offending commit
as the pointer has already been verified to be non-NULL.
Fixes: c84117912bdd ("USB: lpc32xx_udc: Fix error handling in probe")
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull USB fixes from Greg KH:
"Here are some small USB fixes, and bunch of reverts for 6.19-rc3.
Included in here are:
- reverts of some typec ucsi driver changes that had a lot of
regression reports after -rc1. Let's just revert it all for now and
it will come back in a way that is better tested.
- other typec bugfixes
- usb-storage quirk fixups
- dwc3 driver fix
- other minor USB fixes for reported problems.
All of these have passed 0-day testing and individual testing"
* tag 'usb-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
Revert "usb: typec: ucsi: Update UCSI structure to have message in and message out fields"
Revert "usb: typec: ucsi: Add support for message out data structure"
Revert "usb: typec: ucsi: Enable debugfs for message_out data structure"
Revert "usb: typec: ucsi: Add support for SET_PDOS command"
Revert "usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common"
Revert "usb: typec: ucsi: Get connector status after enable notifications"
usb: ohci-nxp: clean up probe error labels
usb: gadget: lpc32xx_udc: clean up probe error labels
usb: ohci-nxp: fix device leak on probe failure
usb: phy: isp1301: fix non-OF device reference imbalance
usb: gadget: lpc32xx_udc: fix clock imbalance in error path
usb: typec: ucsi: Get connector status after enable notifications
usb: usb-storage: Maintain minimal modifications to the bcdDevice range.
usb: dwc3: of-simple: fix clock resource leak in dwc3_of_simple_probe
usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common
USB: lpc32xx_udc: Fix error handling in probe
usb: typec: altmodes/displayport: Drop the device reference in dp_altmode_probe()
usb: phy: fsl-usb: Fix use-after-free in delayed work during device removal
usb: renesas_usbhs: Fix a resource leak in usbhs_pipe_malloc()
usb: typec: ucsi: huawei-gaokin: add DRM dependency
...
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for some reported issues.
Included in here are:
- serial sysfs fwnode fix that was much reported
- sh-sci driver fix
- serial device init bugfix
- 8250 bugfix
- xilinx_uartps bugfix
All of these have passed 0-day testing and individual testing"
* tag 'tty-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: xilinx_uartps: fix rs485 delay_rts_after_send
serial: sh-sci: Check that the DMA cookie is valid
serial: core: Fix serial device initialization
serial: 8250: longson: Fix NULL vs IS_ERR() bug in probe
serial: core: Restore sysfs fwnode information
Johan Hovold <johan@kernel.org> says:
The new buffer management code has not been tested or reviewed properly
and breaks boot of machines like the Lenovo ThinkPad X13s.
Fixing this will require designing a proper interface for managing these
transactions, something which most likely involves reverting most of the
offending commit anyway.
Revert the broken code to fix the regression and let Intel come up with
a properly tested implementation for a later kernel.
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull firewire fix from Takashi Sakamoto:
"A fix for PCI driver for Texas Instruments PCILyx series.
The driver had a bug where it allocated a DMA-coherent buffer of 16 KB
but released it using PAGE_SIZE. This disproportion was reported in
2020, but the fix was never merged. It is finally resolved"
* tag 'firewire-fixes-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: nosy: Fix dma_free_coherent() size
RTS line control with delay should be triggered when there is no more
bytes in kfifo and hardware buffer is empty. Without this patch RTS
control is scheduled right after feeding hardware buffer and this is too
early.
RTS line may change state before hardware buffer is empty.
With this patch delayed RTS state change is triggered when function
cdns_uart_handle_tx is called from cdns_uart_isr on
CDNS_UART_IXR_TXEMPTY exactly when hardware completed transmission
Fixes: fccc9d9233f9 ("tty: serial: uartps: Add rs485 support to uartps driver")
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20251221103221.1971125-1-jakub.turek@elsta.tech
Signed-off-by: Jakub Turek <jakub.turek@elsta.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 14ad4c10d5bdd413ff9a914260e89b5f54b7a2c7.
The originally offending commit will be reverted instead of this fix up
at this point in time, so revert this fix.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: stable <stable@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Fixes: 14ad4c10d5bd ("usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common")
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 3e082978c33151d576694deac8abde021ea669a8.
The new buffer management code has not been tested or reviewed properly
and breaks boot of machines like the Lenovo ThinkPad X13s:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
CPU: 0 UID: 0 PID: 813 Comm: kworker/0:3 Not tainted 6.19.0-rc2 #26 PREEMPT
Hardware name: LENOVO 21BYZ9SRUS/21BYZ9SRUS, BIOS N3HET87W (1.59 ) 12/05/2023
Workqueue: events ucsi_handle_connector_change [typec_ucsi]
Call trace:
ucsi_sync_control_common+0xe4/0x1ec [typec_ucsi] (P)
ucsi_run_command+0xcc/0x194 [typec_ucsi]
ucsi_send_command_common+0x84/0x2a0 [typec_ucsi]
ucsi_get_connector_status+0x48/0x78 [typec_ucsi]
ucsi_handle_connector_change+0x5c/0x4f4 [typec_ucsi]
process_one_work+0x208/0x60c
worker_thread+0x244/0x388
The new code completely ignores concurrency so that the message length
can be updated while a transaction is ongoing. In the above case, the
length ends up being modified by another thread while processing an ack
so that the NULL cci pointer is dereferenced.
Fixing this will require designing a proper interface for managing these
transactions, something which most likely involves reverting most of the
offending commit anyway.
Revert the broken code to fix the regression and let Intel come up with
a properly tested implementation for a later kernel.
Fixes: 3e082978c331 ("usb: typec: ucsi: Update UCSI structure to have message in and message out fields")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-5-johan@kernel.org
Pull RISC-V updates from Paul Walmsley:
"Nothing exotic here; these are the cleanup and new ISA extension
probing patches (not including CFI):
- Add probing and userspace reporting support for the standard RISC-V
ISA extensions Zilsd and Zclsd, which implement load/store dual
instructions on RV32
- Abstract the register saving code in setup_sigcontext() so it can
be used for stateful RISC-V ISA extensions beyond the vector
extension
- Add the SBI extension ID and some initial data structure
definitions for the RISC-V standard SBI debug trigger extension
- Clean up some code slightly: change some page table functions to
avoid atomic operations oinn !SMP and to avoid unnecessary casts to
atomic_long_t; and use the existing RISCV_FULL_BARRIER macro in
place of some open-coded 'fence rw,rw' instructions"
* tag 'riscv-for-linus-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add SBI debug trigger extension and function ids
riscv/atomic.h: use RISCV_FULL_BARRIER in _arch_atomic* function.
riscv: hwprobe: export Zilsd and Zclsd ISA extensions
riscv: add ISA extension parsing for Zilsd and Zclsd
dt-bindings: riscv: add Zilsd and Zclsd extension descriptions
riscv: mm: use xchg() on non-atomic_long_t variables, not atomic_long_xchg()
riscv: mm: ptep_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: mm: pmdp_huge_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: signal: abstract header saving for setup_sigcontext
It looks like the buffer allocated and mapped in add_card() is done
with size RCV_BUFFER_SIZE which is 16 KB and 4KB.
Fixes: 286468210d83 ("firewire: new driver: nosy - IEEE 1394 traffic sniffer")
Co-developed-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Co-developed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20251216165420.38355-2-fourier.thomas@gmail.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The driver updates struct sci_port::tx_cookie to zero right before the TX
work is scheduled, or to -EINVAL when DMA is disabled.
dma_async_is_complete(), called through dma_cookie_status() (and possibly
through dmaengine_tx_status()), considers cookies valid only if they have
values greater than or equal to 1.
Passing zero or -EINVAL to dmaengine_tx_status() before any TX DMA
transfer has started leads to an incorrect TX status being reported, as the
cookie is invalid for the DMA subsystem. This may cause long wait times
when the serial device is opened for configuration before any TX activity
has occurred.
Check that the TX cookie is valid before passing it to
dmaengine_tx_status().
Fixes: 7cc0e0a43a91 ("serial: sh-sci: Check if TX data was written to device in .tx_empty()")
Cc: stable <stable@kernel.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251217135759.402015-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 5106dbab44fba8ec6dede3f4e75d17f5aa777ec8.
There are reported issues in this file, so revert the commit for now so
that the original offending changes can be reverted and working systems
can be restored. This can come back at a later time if it is rebased
yet-again (sorry.)
Cc: stable <stable@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Fixes: 5106dbab44fb ("usb: typec: ucsi: Get connector status after enable notifications")
Cc: Kenneth R. Crudup <kenny@panix.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Hsin-Te Yuan <yuanhsinte@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit db0028637cc832add6d87564fcc2ebb12781b046.
The new buffer management code that this feature relies on is broken so
revert for now.
As for the in buffer, nothing prevents the out message size and buffer
from being modified while the message is being processed due to lack of
serialisation.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-4-johan@kernel.org
Pull powerpc fixes from Madhavan Srinivasan:
- Fix for kexec warning due to SMT disable or partial SMT enabled
- Handle font bitmap pointer with reloc_offset to fix boot crash
- Fix to enable cpuidle state for Power11
- Couple of misc fixes
Thanks to Aboorva Devarajan, Aditya Bodkhe, Cedar Maxwell, Christian
Zigotzky, Christophe Leroy, Christophe Leroy (CS GROUP), Finn Thain,
Gopi Krishna Menon, Guenter Roeck, Jan Stancek, Joe Lawrence, Josh
Poimboeuf, Justin M. Forbes, Madadi Vineeth Reddy, Naveen N Rao (AMD),
Nysal Jan K.A., Sachin P Bappalige, Samir M, Sourabh Jain, Srikar
Dronamraju, and Stan Johnson
* tag 'powerpc-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Restore disabling of interrupts at interrupt/syscall exit
powerpc/powernv: Enable cpuidle state detection for POWER11
powerpc: Add reloc_offset() to font bitmap pointer used for bootx_printf()
powerpc/tools: drop `-o pipefail` in gcc check scripts
selftests/powerpc/pmu/: Add check_extended_reg_test to .gitignore
powerpc/kexec: Enable SMT before waking offline CPUs
Debug trigger extension is an SBI extension to support native debugging
in S-mode and VS-mode. This patch adds the extension and the function
IDs defined by the extension.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Link: https://patch.msgid.link/20250710125231.653967-2-hchauhan@ventanamicro.com
[pjw@kernel.org: updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
During restoring sysfs fwnode information the information of_node_reused
was dropped. This was previously set by device_set_of_node_from_dev().
Add it back manually
Fixes: 24ec03cc5512 ("serial: core: Restore sysfs fwnode information")
Cc: stable <stable@kernel.org>
Suggested-by: Cosmin Tanislav <demonsingur@gmail.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Michael Walle <mwalle@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Cosmin Tanislav <demonsingur@gmail.com>
Link: https://patch.msgid.link/20251219152813.1893982-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Error labels should be named after what they do rather than after from
where they are jumped to.
Rename the probe error labels for consistency and to improve
readability.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 775fae520e6ae62c393a8daf42dc534f09692f3f.
The new buffer management code that this relies on is broken so revert
for now.
It also looks like the error handling needs some more thought as the
message out size is not reset on errors.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-3-johan@kernel.org
Pull spi fixes from Mark Brown:
"We've got more fixes here for the Cadence QSPI controller, this time
fixing some issues that come up when working with slower flashes on
some platforms plus a general race condition.
We also add support for the Allwinner A523, this is just some new
compatibles"
* tag 'spi-fix-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Improve CQSPI_SLOW_SRAM quirk if flash is slow
spi: cadence-quadspi: Prevent lost complete() call during indirect read
spi: sun6i: Support A523's SPI controllers
spi: dt-bindings: sun6i: Add compatibles for A523's SPI controllers
Commit 2997876c4a1a ("powerpc/32: Restore clearing of MSR[RI] at
interrupt/syscall exit") delayed clearing of MSR[RI], but missed that
both MSR[RI] and MSR[EE] are cleared at the same time, so the commit
also delayed the disabling of interrupts, leading to unexpected
behaviour.
To fix that, mostly revert the blamed commit and restore the clearing
of MSR[RI] in interrupt_exit_kernel_prepare() instead. For 8xx it
implies adding a synchronising instruction after the mtspr in order to
make sure no instruction counter interrupt (used for perf events) will
fire just after clearing MSR[RI].
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Closes: https://lore.kernel.org/all/4d0bd05d-6158-1323-3509-744d3fbe8fc7@xenosoft.de/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/6b05eb1c-fdef-44e0-91a7-8286825e68f1@roeck-us.net/
Fixes: 2997876c4a1a ("powerpc/32: Restore clearing of MSR[RI] at interrupt/syscall exit")
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/585ea521b2be99d293b539bbfae148366cfb3687.1766146895.git.chleroy@kernel.org
Pull Coccinelle fixes from Julia Lawall:
"These fix a typo and make the coccicheck script more robust by
ensuring that only compatible semantic patches are executed for the
chosen mode"
* tag 'coccinelle-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Coccinelle: pm_runtime: Fix typo in report message
scripts: coccicheck: filter *.cocci files by MODE
The devm_platform_get_and_ioremap_resource() function never returns
NULL, it returns error pointers. Fix the error checking to match.
Fixes: 25e95d763176 ("serial: 8250: Add Loongson uart driver support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aSsIa3KdAlXh5uQC@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Error labels should be named after what they do rather than after from
where they are jumped to.
Rename the probe error labels for consistency and to improve
readability.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 1b474ee01fbb73b1365adbf9b3067f7375e471ee.
The new buffer management code that this feature relies on is broken so
revert for now.
The interface for writing data and support for UCSI_SET_PDOS looks like
it could use some more thought as well.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-2-johan@kernel.org
Pull regulator fixes from Mark Brown:
"A couple of fixes from Thomas, making the UAPI headers more robustly
correct and ensuring they are covered by checkpatch, and one from
Andreas fixing an update for a change to the DT bindings that I missed
was requested during bindings review in the newly added fp9931 driver"
* tag 'regulator-fix-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fp9931: fix regulator node pointer
regulator: Add UAPI headers to MAINTAINERS
regulator: uapi: Use UAPI integer type
Merge series from Mateusz Litwin <mateusz.litwin@nokia.com>:
On the Stratix10 platform, indirect reads can become very slow due to lost
interrupts and/or missed `complete()` calls, causing
`wait_for_completion_timeout()` to expire.
Three issues were identified:
1) A race condition exists between the read loop and IRQ `complete()`
call:
An IRQ can call `complete()` after the inner loop ends, but before
`reinit_completion()`, losing the completion event and leading to
`wait_for_completion_timeout()` expire. This function will not return
an error because `bytes_to_read` > 0 (indicating data is already in the
FIFO) and the final `ret` value is overwritten by
`cqspi_wait_for_bit()` return value (indicating request completion),
masking the timeout.
For test purpose, logging was added to print the count of timeouts and
the outer loop count.
$ dd if=/dev/mtd0 of=/dev/null bs=64M count=1
[ 2232.925219] cadence-qspi ff8d2000.spi: Indirect read error timeout
(1) loop (12472)
[ 2236.200391] cadence-qspi ff8d2000.spi: Indirect read error timeout
(1) loop (12460)
[ 2239.482836] cadence-qspi ff8d2000.spi: Indirect read error timeout
(5) loop (12450)
This indicates that such an event is rare, but possible.
Tested on the Stratix10 platform.
2) The quirk assumes the indirect read path never leaves the inner loop on
SoCFPGA. This assumption is incorrect when using slow flash. Disabling
IRQs in the inner loop can cause lost interrupts.
3) The `CQSPI_SLOW_SRAM` quirk disables `CQSPI_REG_IRQ_IND_COMP` (indirect
completion) interrupt, relying solely on the `CQSPI_REG_IRQ_WATERMARK`
(FIFO watermark) interrupt. For small transfers sizes, the final data
read might not fill the FIFO sufficiently to trigger the watermark,
preventing completion and leading to wait_for_completion_timeout()
expiration.
Two patches have been prepared to resolve these issues.
- [1/2] spi: cadence-quadspi: Prevent lost complete() call during
indirect read
Moving `reinit_completion()` before the inner loop prevents a race
condition. This might cause a premature IRQ complete() call to occur;
however, in the worst case, this will result in a spurious wakeup and
another wait cycle, which is preferable to waiting for a timeout.
- [2/2] spi: cadence-quadspi: Improve CQSPI_SLOW_SRAM quirk if flash is
slow
Re-enabling `CQSPI_REG_IRQ_IND_COMP` interrupt resolves the problem for
small reads and removes the disabling of interrupts, addressing the
issue with lost interrupts. This marginally increases the IRQ count.
Test:
$ dd if=/dev/mtd0 of=/dev/null bs=1M count=64
Results from the Stratix10 platform with mt25qu02g flash.
FIFO size in all tests: 128
Serviced interrupt call counts:
Without `CQSPI_SLOW_SRAM` quirk: 16 668 850
With `CQSPI_SLOW_SRAM` quirk: 204 176
With `CQSPI_SLOW_SRAM` and this patch: 224 528
Patch 2/2: Delivers a substantial read‑performance improvement for the
Cadence QSPI controller on the Stratix10 platform. Patch 1/2: Applies to
all platforms and should yield a modest performance gain, most noticeable
with large `CQSPI_READ_TIMEOUT_MS` values and workloads dominated by many
small reads.
Extend cpuidle state detection to POWER11 by updating the PVR check.
This ensures POWER11 correctly recognizes supported stop states,
similar to POWER9 and POWER10.
Without Patch: (Power11 - PowerNV systems)
CPUidle driver: powernv_idle
CPUidle governor: menu
analyzing CPU 927:
Number of idle states: 1
Available idle states: snooze
snooze:
Flags/Description: snooze
Latency: 0
Usage: 251631
Duration: 207497715900
--
With Patch: (Power11 - PowerNV systems)
CPUidle driver: powernv_idle
CPUidle governor: menu
analyzing CPU 959:
Number of idle states: 4
Available idle states: snooze stop0_lite stop0 stop3
snooze:
Flags/Description: snooze
Latency: 0
Usage: 2
Duration: 33
stop0_lite:
Flags/Description: stop0_lite
Latency: 1
Usage: 1
Duration: 52
stop0:
Flags/Description: stop0
Latency: 10
Usage: 13
Duration: 1920
stop3:
Flags/Description: stop3
Latency: 45
Usage: 381
Duration: 21638478
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Reviewed-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250908085123.216780-1-aboorvad@linux.ibm.com
Export Zilsd and Zclsd ISA extensions through hwprobe.
Signed-off-by: Pincheng Wang <pincheng.plct@isrc.iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://patch.msgid.link/20250826162939.1494021-4-pincheng.plct@isrc.iscas.ac.cn
[pjw@kernel.org: fixed whitespace; updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Pull input fixes from Dmitry Torokhov:
- a quirk for i8042 to better handle another TUXEDO model
- a quirk to atkbd to handle incorcet behavior of HONOR FMB-P internal
keyboard
- a definition for a new ABS_SND_PROFILE event
- fixes to alps and lkkbd drivers to reliably shut down pending work on
removal
- a fix to apple_z2 driver tightening input report parsing
- a fix for "off-by-one" error when validating config in ti_am335x_tsc
driver
- addition of CRKD Guitars device IDs to xpad driver.
* tag 'input-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ti_am335x_tsc - fix off-by-one error in wire_order validation
Input: xpad - add support for CRKD Guitars
Input: add ABS_SND_PROFILE
Input: apple_z2 - fix reading incorrect reports after exiting sleep
Input: alps - fix use-after-free bugs caused by dev3_register_work
Input: i8042 - add TUXEDO InfinityBook Max Gen10 AMD to i8042 quirk table
Input: atkbd - skip deactivate for HONOR FMB-P's internal keyboard
Input: lkkbd - disable pending work before freeing device
The change that restores sysfs fwnode information does it only for OF cases.
Update the fix to cover all possible types of fwnodes.
Fixes: d36f0e9a0002 ("serial: core: restore of_node information in sysfs")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251127163650.2942075-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the reference taken when looking up the PHY I2C device
during probe on probe failure (e.g. probe deferral) and on driver
unbind.
Fixes: 73108aa90cbf ("USB: ohci-nxp: Use isp1301 driver")
Cc: stable@vger.kernel.org # 3.5
Reported-by: Ma Ke <make24@iscas.ac.cn>
Link: https://lore.kernel.org/lkml/20251117013428.21840-1-make24@iscas.ac.cn/
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lpc32xx_udc_probe() acquires an i2c_client reference through
isp1301_get_client() but fails to release it in both error handling
paths and the normal removal path. This could result in a reference
count leak for the I2C device, preventing proper cleanup and potentially
leading to resource exhaustion. Add put_device() to release the
reference in the probe failure path and in the remove function.
Calling path: isp1301_get_client() -> of_find_i2c_device_by_node() ->
i2c_find_device_by_fwnode(). As comments of i2c_find_device_by_fwnode()
says, 'The user must call put_device(&client->dev) once done with the
i2c client.'
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20251215020931.15324-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull drm fixes from Dave Airlie:
"Post overeating fixes, only msm for this week has anything, so quiet
as expected.
msm:
- GPU:
- Fix crash on a7xx GPUs not supporting IFPC
- Fix perfcntr use with IFPC
- Concurrent binning fix
- DPU:
- Fixed DSC and SSPP fetching issues
- Switched to scnprint instead of snprintf
- Added missing NULL checks in pingpong code"
* tag 'drm-fixes-2025-12-27' of https://gitlab.freedesktop.org/drm/kernel: (27 commits)
drm/msm: Replace unsafe snprintf usage with scnprintf
drm/msm/dpu: Add missing NULL pointer check for pingpong interface
Revert "drm/msm/dpu: Enable quad-pipe for DSC and dual-DSI case"
Revert "drm/msm/dpu: support plane splitting in quad-pipe case"
drm/msm: msm_iommu.c: fix all kernel-doc warnings
drm/msm: msm_gpu.h: fix all kernel-doc warnings
drm/msm: msm_gem_vma.c: fix all kernel-doc warnings
drm/msm: msm_fence.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_wb.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_vbif.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_top.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_sspp.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_pingpong.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_merge3d.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_lm.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_intf.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_dspp.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_dsc.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_cwb.h: fix all kernel-doc warnings
drm/msm/dpu: dpu_hw_ctl.h: fix all kernel-doc warnings
...
Sync the driver with the binding. During review process a regulators
subnode was requested but neither driver nor test setup was updated.
Fixes: 12d821bd13d4 ("regulator: Add FP9931/JD9930 driver")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251223-fp9931-fix-v1-1-b19b4c1e7056@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
The A523 has four SPI controllers. One of them supports MIPI DBI mode
in addition to standard SPI.
Compared to older generations, this newer controller now has a combined
counter for the RX FIFO ad buffer levels. In older generations, the
RX buffer level was a separate bitfield in the FIFO status register.
In practice this difference is negligible. The buffer is mostly
invisible to the implementation. If programmed I/O transfers are limited
to the FIFO size, then the contents of the buffer seem to always be
flushed over to the FIFO. For DMA, the DRQ trigger levels are only tied
to the FIFO levels. In all other aspects, the controller is the same as
the one in the R329.
Support the standard SPI mode controllers using the settings for R329.
DBI is left out as there currently is no infrastructure for enabling a
DBI host controller, as was the case for the R329.
Also fold the entry for the R329 to make the style consistent.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251221110513.1850535-3-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
CQSPI_SLOW_SRAM quirk on the Stratix10 platform causes fewer interrupts,
but also causes timeouts if a small block is used or if flash devices are
slower than or equal in speed to SRAM's read operations. Adding the
CQSPI_REG_IRQ_IND_COMP interrupt would resolve the problem for small
reads, and removing the disabling of interrupts would resolve the issue
with lost interrupts.
This marginally increases IRQ count. Tests show that this will cause only
a few percent more interrupts.
Test:
$ dd if=/dev/mtd0 of=/dev/null bs=1M count=64
Results from the Stratix10 platform with mt25qu02g flash.
FIFO size in all tests: 128
Serviced interrupt call counts:
Without CQSPI_SLOW_SRAM quirk: 16 668 850
With CQSPI_SLOW_SRAM quirk: 204 176
With CQSPI_SLOW_SRAM and this commit: 224 528
Signed-off-by: Mateusz Litwin <mateusz.litwin@nokia.com>
Link: https://patch.msgid.link/20251218-cqspi_indirect_read_improve-v2-2-396079972f2a@nokia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since Linux v6.7, booting using BootX on an Old World PowerMac produces
an early crash. Stan Johnson writes, "the symptoms are that the screen
goes blank and the backlight stays on, and the system freezes (Linux
doesn't boot)."
Further testing revealed that the failure can be avoided by disabling
CONFIG_BOOTX_TEXT. Bisection revealed that the regression was caused by
a change to the font bitmap pointer that's used when btext_init() begins
painting characters on the display, early in the boot process.
Christophe Leroy explains, "before kernel text is relocated to its final
location ... data is addressed with an offset which is added to the
Global Offset Table (GOT) entries at the start of bootx_init()
by function reloc_got2(). But the pointers that are located inside a
structure are not referenced in the GOT and are therefore not updated by
reloc_got2(). It is therefore needed to apply the offset manually by using
PTRRELOC() macro."
Cc: stable@vger.kernel.org
Link: https://lists.debian.org/debian-powerpc/2025/10/msg00111.html
Link: https://lore.kernel.org/linuxppc-dev/d81ddca8-c5ee-d583-d579-02b19ed95301@yahoo.com/
Reported-by: Cedar Maxwell <cedarmaxwell@mac.com>
Closes: https://lists.debian.org/debian-powerpc/2025/09/msg00031.html
Bisected-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 0ebc7feae79a ("powerpc: Use shared font data")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/22b3b247425a052b079ab84da926706b3702c2c7.1762731022.git.fthain@linux-m68k.org
Add parsing for Zilsd and Zclsd ISA extensions which were ratified in
commit f88abf1 ("Integrating load/store pair for RV32 with the
main manual") of the riscv-isa-manual.
Signed-off-by: Pincheng Wang <pincheng.plct@isrc.iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://patch.msgid.link/20250826162939.1494021-3-pincheng.plct@isrc.iscas.ac.cn
[pjw@kernel.org: cleaned up checkpatch issues, whitespace; updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Pull i2c fixes from Wolfram Sang:
- bcm, pxa, rcar: fix void-pointer-to-enum-cast warning
- new hardware IDs / DT bindings for
- Intel Nova Lake-S
- Mobileye
- Qualcomm SM8750
* tag 'i2c-for-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: qcom-cci: Document SM8750 compatible
i2c: i801: Add support for Intel Nova Lake-S
dt-bindings: i2c: dw: Add Mobileye I2C controllers
i2c: rcar: Fix Wvoid-pointer-to-enum-cast warning
i2c: pxa: Fix Wvoid-pointer-to-enum-cast warning
i2c: bcm-iproc: Fix Wvoid-pointer-to-enum-cast warning
The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows
wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds
access when used as index in 'config_pins[wire_order[i]]'.
Since config_pins has 4 elements (indices 0-3), the valid range for
wire_order should be 0-3. Fix the off-by-one error by using >= instead
of > in the validation check.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://patch.msgid.link/20251114062817.852698-1-junjie.cao@intel.com
Fixes: bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Enhance the coccicheck script to filter *.cocci files based on the
specified MODE (e.g., report, patch). This ensures that only compatible
semantic patch files are executed, preventing errors such as:
"virtual rule report not supported"
This error occurs when a .cocci file does not define a 'virtual <MODE>'
rule, yet is executed in that mode.
For example:
make coccicheck M=drivers/hwtracing/coresight/ MODE=report
In this case, running "secs_to_jiffies.cocci" would trigger the error
because it lacks support for 'report' mode. With this change, such files
are skipped automatically, improving robustness and developer
experience.
Signed-off-by: Songwei Chai <quic_songchai@quicinc.com>
Reviewed-by: Julia Lawall <Julia.Lawall@inria.fr>
A recent change fixing a device reference leak in a UDC driver
introduced a potential use-after-free in the non-OF case as the
isp1301_get_client() helper only increases the reference count for the
returned I2C device in the OF case.
Increment the reference count also for non-OF so that the caller can
decrement it unconditionally.
Note that this is inherently racy just as using the returned I2C device
is since nothing is preventing the PHY driver from being unbound while
in use.
Fixes: c84117912bdd ("USB: lpc32xx_udc: Fix error handling in probe")
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In error paths, call typec_altmode_put_plug() to drop the device reference
obtained by typec_altmode_get_plug().
Fixes: 71ba4fe56656 ("usb: typec: altmodes/displayport: add SOP' support")
Cc: stable <stable@kernel.org>
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251206070445.190770-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull SCSI fixes from James Bottomley:
"Three HBA driver and one upper level driver (sg) fix.
The sg change is the largest, but that results mostly from moving code
to avoid the described race condition"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Add ufshcd_update_evt_hist() for UFS suspend error
scsi: sg: Fix occasional bogus elapsed time that exceeds timeout
scsi: mpi3mr: Read missing IOCFacts flag for reply queue full overflow
scsi: scsi_debug: Fix atomic write enable module param description
Fixes for v6.19:
GPU:
- Fix crash on a7xx GPUs not supporting IFPC
- Fix perfcntr use with IFPC
- Concurrent binning fix
DPU:
- Fixed DSC and SSPP fetching issues
- Switched to scnprint instead of snprintf
- Added missing NULL checks in pingpong code
Also documentation fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV01jcLLChsFtmqc4VDNoQ2ic2q+d86n3wdoSUdmW6xaSdQ@mail.gmail.com
The A523 has four SPI controllers. One of them supports MIPI DBI mode
in addition to standard SPI.
Compared to older generations, this newer controller now has a combined
counter for the RX FIFO ad buffer levels. In older generations, the
RX buffer level was a separate bitfield in the FIFO status register.
In practice this difference is negligible. The buffer is mostly
invisible to the implementation. If programmed I/O transfers are limited
to the FIFO size, then the contents of the buffer seem to always be
flushed over to the FIFO. For DMA, the DRQ trigger levels are only tied
to the FIFO levels. In all other aspects, the controller is the same as
the one in the R329.
Add new compatible strings for the new controllers.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251221110513.1850535-2-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A race condition exists between the read loop and IRQ `complete()` call.
An interrupt could call the complete() between the inner loop and
reinit_completion(), potentially losing the completion event and causing
an unnecessary timeout. Moving reinit_completion() before the loop
prevents this. A premature signal will only result in a spurious wakeup
and another wait cycle, which is preferable to waiting for a timeout.
Signed-off-by: Mateusz Litwin <mateusz.litwin@nokia.com>
Link: https://patch.msgid.link/20251218-cqspi_indirect_read_improve-v2-1-396079972f2a@nokia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: 0f71dcfb4aef ("powerpc/ftrace: Add support for -fpatchable-function-entry")
Fixes: b71c9ffb1405 ("powerpc: Add arch/powerpc/tools directory")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Fixes: 8c50b72a3b4f ("powerpc/ftrace: Add Kconfig & Make glue for mprofile-kernel")
Fixes: abba759796f9 ("powerpc/kbuild: move -mprofile-kernel check to Kconfig")
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/cc6cdd116c3ad9d990df21f13c6d8e8a83815bbd.1758641374.git.jstancek@redhat.com
Add descriptions for the Zilsd (Load/Store pair instructions) and
Zclsd (Compressed Load/Store pair instructions) ISA extensions
which were ratified in commit f88abf1 ("Integrating load/store
pair for RV32 with the main manual") of the riscv-isa-manual.
Signed-off-by: Pincheng Wang <pincheng.plct@isrc.iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250826162939.1494021-2-pincheng.plct@isrc.iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Pull x86 fixes from Ingo Molnar:
- Fix FPU core dumps on certain CPU models
- Fix htmldocs build warning
- Export TLB tracing event name via header
- Remove unused constant from <linux/mm_types.h>
- Fix comments
- Fix whitespace noise in documentation
- Fix variadic structure's definition to un-confuse UBSAN
- Fix posted MSI interrupts irq_retrigger() bug
- Fix asm build failure with older GCC builds
* tag 'x86-urgent-2025-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Fix old GCC compile fails
x86/msi: Make irq_retrigger() functional for posted MSI
x86/platform/uv: Fix UBSAN array-index-out-of-bounds
mm: Remove tlb_flush_reason::NR_TLB_FLUSH_REASONS from <linux/mm_types.h>
x86/mm/tlb/trace: Export the TLB_REMOTE_WRONG_CPU enum in <trace/events/tlb.h>
x86/sgx: Remove unmatched quote in __sgx_encl_extend function comment
x86/boot/Documentation: Fix whitespace noise in boot.rst
x86/fpu: Fix FPU state core dump truncation on CPUs with no extended xfeatures
x86/boot/Documentation: Fix htmldocs build warning due to malformed table in boot.rst
Add SM8750 compatible consistent with CAMSS CCI interfaces.
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251126-add-support-for-camss-on-sm8750-v1-1-646fee2eb720@oss.qualcomm.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
A recent change fixing a device reference leak introduced a clock
imbalance by reusing an error path so that the clock may be disabled
before having been enabled.
Note that the clock framework allows for passing in NULL clocks so there
is no risk for a NULL pointer dereference.
Also drop the bogus I2C client NULL check added by the offending commit
as the pointer has already been verified to be non-NULL.
Fixes: c84117912bdd ("USB: lpc32xx_udc: Fix error handling in probe")
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>