tjh.dev
commits
Pull i2c fix from Wolfram Sang:
"Revert one cleanup which turned out to eat too much stack space"
* tag 'i2c-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Allocate temporary client dynamically
Pull EDAC fix from Borislav Petkov:
- Have qcom_edac use the correct interrupt enable register to configure
the RAS interrupt lines
* tag 'edac_urgent_for_v6.14_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/qcom: Correct interrupt enable register configuration
drivers/i2c/i2c-core-base.c: In function ‘i2c_detect.isra’:
drivers/i2c/i2c-core-base.c:2544:1: warning: the frame size of 1312 bytes is larger than 1024 bytes [-Wframe-larger-than=]
2544 | }
| ^
Fix this by allocating the temporary client structure dynamically, as it
is a rather large structure (1216 bytes, depending on kernel config).
This is basically a revert of the to-be-fixed commit with some
checkpatch improvements.
Fixes: 735668f8e5c9 ("i2c: core: Allocate temp client on the stack in i2c_detect")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
[wsa: updated commit message, merged tags from similar patch]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Pull smb client fix from Steve French:
- Fix potential null pointer dereference
* tag 'v6.14-rc3-smb3-client-fix-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Add check for next_buffer in receive_encrypted_standard()
The previous implementation incorrectly configured the cmn_interrupt_2_enable
register for interrupt handling. Using cmn_interrupt_2_enable to configure
Tag, Data RAM ECC interrupts would lead to issues like double handling of the
interrupts (EL1 and EL3) as cmn_interrupt_2_enable is meant to be configured
for interrupts which needs to be handled by EL3.
EL1 LLCC EDAC driver needs to use cmn_interrupt_0_enable register to configure
Tag, Data RAM ECC interrupts instead of cmn_interrupt_2_enable.
Fixes: 27450653f1db ("drivers: edac: Add EDAC driver support for QCOM SoCs")
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20241119064608.12326-1-quic_kbajaj@quicinc.com
Pull x86 fixes from Ingo Molnar:
- Fix AVX-VNNI CPU feature dependency bug triggered via the 'noxsave'
boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
* tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
docs: arch/x86/sva: Fix two grammar errors under Background and FAQ
x86/cpufeatures: Make AVX-VNNI depend on AVX
MAINTAINERS: Change maintainer for RDT
Add check for the return value of cifs_buf_get() and cifs_small_buf_get()
in receive_encrypted_standard() to prevent null pointer dereference.
Fixes: eec04ea11969 ("smb: client: fix OOB in receive_encrypted_standard()")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull Kbuild fixes from Masahiro Yamada:
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
* tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix a few typos in a comment
kbuild: userprogs: fix bitsize and target detection on clang
kbuild: fix linux-headers package build when $(CC) cannot link userspace
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
Pull rseq fixes from Ingo Molnar:
- Fix overly spread-out RSEQ concurrency ID allocation pattern that
regressed certain workloads
- Fix RSEQ registration syscall behavior on -EFAULT errors when
CONFIG_DEBUG_RSEQ=y (This debug option is disabled on most
distributions)
* tag 'sched-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Fix rseq registration with CONFIG_DEBUG_RSEQ
sched: Compact RSEQ concurrency IDs with reduced threads and affinity
- Correct "in order" to "in order to"
- Append missing quantifier
Signed-off-by: Brian Ochoa <brianeochoa@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250219150920.445802-1-brianeochoa@gmail.com
Pull smb client fixes from Steve French:
- Fix for chmod regression
- Two reparse point related fixes
- One minor cleanup (for GCC 14 compiles)
- Fix for SMB3.1.1 POSIX Extensions reporting incorrect file type
* tag 'v6.14-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Treat unhandled directory name surrogate reparse points as mount directory nodes
cifs: Throw -EOPNOTSUPP error on unsupported reparse point type from parse_reparse_point()
smb311: failure to open files of length 1040 when mounting with SMB3.1.1 POSIX extensions
smb: client, common: Avoid multiple -Wflex-array-member-not-at-end warnings
smb: client: fix chmod(2) regression with ATTR_READONLY
Pull Kbuild fixes from Masahiro Yamada:
- Suppress false-positive -Wformat-{overflow,truncation}-non-kprintf
warnings regardless of the W= option
- Avoid CONFIG_TRIM_UNUSED_KSYMS dropping symbols passed to symbol_get()
- Fix a build regression of the Debian linux-headers package
* tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: add missing quotation marks for CC variable
kbuild: fix misspelling in scripts/Makefile.lib
kbuild: keep symbols for symbol_get() even with CONFIG_TRIM_UNUSED_KSYMS
scripts/Makefile.extrawarn: Do not show clang's non-kprintf warnings at W=1
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
Namely: s/becasue/because/ and s/wiht/with/ plus an added article.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull perf event fixes from Ingo Molnar:
"Fix x86 Intel Lion Cove CPU event constraints, and fix uprobes
debug/error printk output pointer-value verbosity"
* tag 'perf-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix event constraints for LNC
uprobes: Don't use %pK through printk
With CONFIG_DEBUG_RSEQ=y, at rseq registration the read-only fields are
copied from user-space, if this copy fails the syscall returns -EFAULT
and the registration should not be activated - but it erroneously is.
Move the activation of the registration after the copy of the fields to
fix this bug.
Fixes: 7d5265ffcd8b ("rseq: Validate read-only fields under DEBUG_RSEQ config")
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20250219205330.324770-1-mjeanson@efficios.com
The 'noxsave' boot option disables support for AVX, but support for the
AVX-VNNI feature was still declared on CPUs that support it. Fix this.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250220060124.89622-1-ebiggers@kernel.org
Pull bcachefs fixes from Kent Overstreet:
"Small stuff:
- The fsck code for Hongbo's directory i_size patch was wrong, caught
by transaction restart injection: we now have the CI running
another test variant with restart injection enabled
- Another fixup for reflink pointers to missing indirect extents:
previous fix was for fsck code, this fixes the normal runtime paths
- Another small srcu lock hold time fix, reported by jpsollie"
* tag 'bcachefs-2025-02-20' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix srcu lock warning in btree_update_nodes_written()
bcachefs: Fix bch2_indirect_extent_missing_error()
bcachefs: Fix fsck directory i_size checking
If the reparse point was not handled (indicated by the -EOPNOTSUPP from
ops->parse_reparse_point() call) but reparse tag is of type name surrogate
directory type, then treat is as a new mount point.
Name surrogate reparse point represents another named entity in the system.
From SMB client point of view, this another entity is resolved on the SMB
server, and server serves its content automatically. Therefore from Linux
client point of view, this name surrogate reparse point of directory type
crosses mount point.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull power management fix from Rafael Wysocki:
"Fix a recently introduced kernel crash due to a NULL pointer
dereference during system-wide suspend (Rafael Wysocki)"
* tag 'pm-6.14-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Restrict power.set_active propagation
While attempting to build a Debian packages with CC="ccache gcc", I
saw the following error as builddeb builds linux-headers-$KERNELVERSION:
make HOSTCC=ccache gcc VPATH= srcroot=. -f ./scripts/Makefile.build obj=debian/linux-headers-6.14.0-rc1/usr/src/linux-headers-6.14.0-rc1/scripts
make[6]: *** No rule to make target 'gcc'. Stop.
Upon investigation, it seems that one instance of $(CC) variable reference
in ./scripts/package/install-extmod-build was missing quotation marks,
causing the above error.
Add the missing quotation marks around $(CC) to fix build.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package")
Co-developed-by: Mingcong Bai <jeffbai@aosc.io>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Tested-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for some reported problems.
Nothing major, just:
- sc16is7xx irq check fix
- 8250 fifo underflow fix
- serial_port and 8250 iotype fixes
Most of these have been in linux-next already, and all have passed
0-day testing"
* tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Fix fifo underflow on flush
serial: 8250_pnp: Remove unneeded ->iotype assignment
serial: 8250_platform: Remove unneeded ->iotype assignment
serial: 8250_of: Remove unneeded ->iotype assignment
serial: port: Make ->iotype validation global in __uart_read_properties()
serial: port: Always update ->iotype in __uart_read_properties()
serial: port: Assign ->iotype correctly when ->iobase is set
serial: sc16is7xx: Fix IRQ number check behavior
This introduces a module for working with faux devices in rust, along with
adding sample code to show how the API is used. Unlike other types of
devices, we don't provide any hooks for device probe/removal - since these
are optional for the faux API and are unnecessary in rust.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Maíra Canal <mairacanal@riseup.net>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/2025021026-exert-accent-b4c6@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scripts/Makefile.clang was changed in the linked commit to move --target from
KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope.
However that variable is not inspected by the userprogs logic,
breaking cross compilation on clang.
Use both variables to detect bitsize and target arguments for userprogs.
Fixes: feb843a469fb ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull irq fixes from Ingo Molnar:
"Fix miscellaneous irqchip bugs"
* tag 'irq-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom-pdc: Workaround hardware register bug on X1E80100
irqchip/jcore-aic, clocksource/drivers/jcore: Fix jcore-pit interrupt request
irqchip/gic-v3: Fix rk3399 workaround when secure interrupts are enabled
According to the latest event list, update the event constraint tables
for Lion Cove core.
The general rule (the event codes < 0x90 are restricted to counters
0-3.) has been removed. There is no restriction for most of the
performance monitoring events.
Fixes: a932aa0e868f ("perf/x86: Add Lunar Lake and Arrow Lake support")
Reported-by: Amiri Khalil <amiri.khalil@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250219141005.2446823-1-kan.liang@linux.intel.com
When a process reduces its number of threads or clears bits in its CPU
affinity mask, the mm_cid allocation should eventually converge towards
smaller values.
However, the change introduced by:
commit 7e019dcc470f ("sched: Improve cache locality of RSEQ concurrency
IDs for intermittent workloads")
adds a per-mm/CPU recent_cid which is never unset unless a thread
migrates.
This is a tradeoff between:
A) Preserving cache locality after a transition from many threads to few
threads, or after reducing the hamming weight of the allowed CPU mask.
B) Making the mm_cid upper bounds wrt nr threads and allowed CPU mask
easy to document and understand.
C) Allowing applications to eventually react to mm_cid compaction after
reduction of the nr threads or allowed CPU mask, making the tracking
of mm_cid compaction easier by shrinking it back towards 0 or not.
D) Making sure applications that periodically reduce and then increase
again the nr threads or allowed CPU mask still benefit from good
cache locality with mm_cid.
Introduce the following changes:
* After shrinking the number of threads or reducing the number of
allowed CPUs, reduce the value of max_nr_cid so expansion of CID
allocation will preserve cache locality if the number of threads or
allowed CPUs increase again.
* Only re-use a recent_cid if it is within the max_nr_cid upper bound,
else find the first available CID.
Fixes: 7e019dcc470f ("sched: Improve cache locality of RSEQ concurrency IDs for intermittent workloads")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lkml.kernel.org/r/20250210153253.460471-2-gmonaco@redhat.com
Due to job transition, I am stepping down as RDT maintainer.
Add Tony as a co-maintainer.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20250131190731.3981085-1-fenghua.yu%40intel.com
Pull xfs fixes from Carlos Maiolino:
"Just a collection of bug fixes, nothing really stands out"
* tag 'xfs-fixes-6.14-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: flush inodegc before swapon
xfs: rename xfs_iomap_swapfile_activate to xfs_vm_swap_activate
xfs: Do not allow norecovery mount with quotacheck
xfs: do not check NEEDSREPAIR if ro,norecovery mount.
xfs: fix data fork format filtering during inode repair
xfs: fix online repair probing when CONFIG_XFS_ONLINE_REPAIR=n
We don't want to be holding the srcu lock while waiting on btree write
completions - easily fixed.
Reported-by: Janpieter Sollie <janpieter.sollie@edpnet.be>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This would help to track and detect by caller if the reparse point type was
processed or not.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after the
rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully
emulated guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
- move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code.
As an initial set of cleanups, move some code from mm/gmap into kvm
and start using __kvm_faultin_pfn() to fault-in pages as needed;
but especially stop abusing page->index and page->lru to aid in the
pgdesc conversion.
x86:
- Add missing check in the fix to defer starting the huge page
recovery vhost_task
- SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
KVM: remove kvm_arch_post_init_vm
KVM: selftests: Fix spelling mistake "initally" -> "initially"
kvm: x86: SRSO_USER_KERNEL_NO is not synthesized
KVM: arm64: timer: Don't adjust the EL2 virtual timer offset
KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV
KVM: arm64: timer: Always evaluate the need for a soft timer
KVM: arm64: Fix nested S2 MMU structures reallocation
KVM: arm64: Fail protected mode init if no vgic hardware is present
KVM: arm64: Flush/sync debug state in protected mode
KVM: s390: selftests: Streamline uc_skey test to issue iske after sske
KVM: s390: remove the last user of page->index
KVM: s390: move PGSTE softbits
KVM: s390: remove useless page->index usage
KVM: s390: move gmap_shadow_pgt_lookup() into kvm
KVM: s390: stop using lists to keep track of used dat tables
KVM: s390: stop using page->index for non-shadow gmaps
KVM: s390: move some gmap shadowing functions away from mm/gmap.c
KVM: s390: get rid of gmap_translate()
KVM: s390: get rid of gmap_fault()
...
Commit 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of
parents and children") exposed an issue related to simple_pm_bus_pm_ops
that uses pm_runtime_force_suspend() and pm_runtime_force_resume() as
bus type PM callbacks for the noirq phases of system-wide suspend and
resume.
The problem is that pm_runtime_force_suspend() does not distinguish
runtime-suspended devices from devices for which runtime PM has never
been enabled, so if it sees a device with runtime PM status set to
RPM_ACTIVE, it will assume that runtime PM is enabled for that device
and so it will attempt to suspend it with the help of its runtime PM
callbacks which may not be ready for that. As it turns out, this
causes simple_pm_bus_runtime_suspend() to crash due to a NULL pointer
dereference.
Another problem related to the above commit and simple_pm_bus_pm_ops is
that setting runtime PM status of a device handled by the latter to
RPM_ACTIVE will actually prevent it from being resumed because
pm_runtime_force_resume() only resumes devices with runtime PM status
set to RPM_SUSPENDED.
To mitigate these issues, do not allow power.set_active to propagate
beyond the parent of the device with DPM_FLAG_SMART_SUSPEND set that
will need to be resumed, which should be a sufficient stop-gap for the
time being, but they will need to be properly addressed in the future
because in general during system-wide resume it is necessary to resume
all devices in a dependency chain in which at least one device is going
to be resumed.
Fixes: 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of parents and children")
Closes: https://lore.kernel.org/linux-pm/1c2433d4-7e0f-4395-b841-b8eac7c25651@nvidia.com/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6137505.lOV4Wx5bFT@rjwysocki.net
Signed-off-by: Oleh Zadorozhnyi <lesorubshayan@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes, and new device ids, for
6.14-rc3. Lots of tiny stuff for reported problems, including:
- new device ids and quirks
- usb hub crash fix found by syzbot
- dwc2 driver fix
- dwc3 driver fixes
- uvc gadget driver fix
- cdc-acm driver fixes for a variety of different issues
- other tiny bugfixes
Almost all of these have been in linux-next this week, and all have
passed 0-day testing"
* tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY
usb: roles: set switch registered flag early on
usb: gadget: uvc: Fix unstarted kthread worker
USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist
usb: gadget: core: flush gadget workqueue after device removal
USB: gadget: f_midi: f_midi_complete to call queue_work
usb: core: fix pipe creation for get_bMaxPacketSize0
usb: dwc3: Fix timeout issue during controller enter/exit from halt state
USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone
USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk
usb: cdc-acm: Fix handling of oversized fragments
usb: cdc-acm: Check control transfer buffer size before access
usb: xhci: Restore xhci_pci support for Renesas HCs
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI
USB: serial: option: drop MeiG Smart defines
USB: serial: option: fix Telit Cinterion FN990A name
USB: serial: option: add Telit Cinterion FN990B compositions
USB: serial: option: add MeiG Smart SLM828
usb: gadget: f_midi: fix MIDI Streaming descriptor lengths
usb: dwc2: gadget: remove of_node reference upon udc_stop
...
When flushing the serial port's buffer, uart_flush_buffer() calls
kfifo_reset() but if there is an outstanding DMA transfer then the
completion function will consume data from the kfifo via
uart_xmit_advance(), underflowing and leading to ongoing DMA as the
driver tries to transmit another 2^32 bytes.
This is readily reproduced with serial-generic and amidi sending even
short messages as closing the device on exit will wait for the fifo to
drain and in the underflow case amidi hangs for 30 seconds on exit in
tty_wait_until_sent(). A trace of that gives:
kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3
amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo
irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3
irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293
irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197
irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101
irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096
Since the port lock is held in when the kfifo is reset in
uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer
hook to adjust the outstanding DMA byte count is sufficient to avoid the
kfifo underflow.
Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable <stable@kernel.org>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20250208124148.1189191-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many drivers abuse the platform driver/bus system as it provides a
simple way to create and bind a device to a driver-specific set of
probe/release functions. Instead of doing that, and wasting all of the
memory associated with a platform device, here is a "faux" bus that
can be used instead.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/2025021026-atlantic-gibberish-3f0c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling
linux-headers package"), the linux-headers Debian package fails to
build when $(CC) cannot build userspace applications, for example,
when using toolchains installed by the 0day bot.
The host programs in the linux-headers package should be rebuilt using
the disto's cross-compiler, ${DEB_HOST_GNU_TYPE}-gcc instead of $(CC).
Hence, the variable 'CC' must be expanded in this shell script instead
of in the top-level Makefile.
Commit f354fc88a72a ("kbuild: install-extmod-build: add missing
quotation marks for CC variable") was not a correct fix because
CC="ccache gcc" should be unrelated when rebuilding userspace tools.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package")
Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-kbuild/CAK7LNARb3xO3ptBWOMpwKcyf3=zkfhMey5H2KnB1dOmUwM79dA@mail.gmail.com/T/#t
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Pull s390 fixes from Vasily Gorbik:
- Fix inline asm constraint in cmma_test_essa() to avoid potential ESSA
detection miscompilation
- Fix build failure with CONFIG_GENDWARFKSYMS by disabling purgatory
symbol exports with -D__DISABLE_EXPORTS
- Update defconfigs
* tag 's390-6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Fix ESSA detection
s390/purgatory: Use -D__DISABLE_EXPORTS
s390: Update defconfigs
On X1E80100, there is a hardware bug in the register logic of the
IRQ_ENABLE_BANK register: While read accesses work on the normal address,
all write accesses must be made to a shifted address. Without a workaround
for this, the wrong interrupt gets enabled in the PDC and it is impossible
to wakeup from deep suspend (CX collapse). This has not caused problems so
far, because the deep suspend state was not enabled. A workaround is
required now since work is ongoing to fix this.
The PDC has multiple "DRV" regions, each one has a size of 0x10000 and
provides the same set of registers for a particular client in the system.
Linux is one the clients and uses DRV region 2 on X1E. Each "bank" inside
the DRV region consists of 32 interrupt pins that can be enabled using the
IRQ_ENABLE_BANK register:
IRQ_ENABLE_BANK[bank] = base + IRQ_ENABLE_BANK + bank * sizeof(u32)
On X1E, this works as intended for read access. However, write access to
most banks is shifted by 2:
IRQ_ENABLE_BANK_X1E[0] = IRQ_ENABLE_BANK[-2]
IRQ_ENABLE_BANK_X1E[1] = IRQ_ENABLE_BANK[-1]
IRQ_ENABLE_BANK_X1E[2] = IRQ_ENABLE_BANK[0] = IRQ_ENABLE_BANK[2 - 2]
IRQ_ENABLE_BANK_X1E[3] = IRQ_ENABLE_BANK[1] = IRQ_ENABLE_BANK[3 - 2]
IRQ_ENABLE_BANK_X1E[4] = IRQ_ENABLE_BANK[2] = IRQ_ENABLE_BANK[4 - 2]
IRQ_ENABLE_BANK_X1E[5] = IRQ_ENABLE_BANK[5] (this one works as intended)
The negative indexes underflow to banks of the previous DRV/client region:
IRQ_ENABLE_BANK_X1E[drv 2][bank 0] = IRQ_ENABLE_BANK[drv 2][bank -2]
= IRQ_ENABLE_BANK[drv 1][bank 5-2]
= IRQ_ENABLE_BANK[drv 1][bank 3]
= IRQ_ENABLE_BANK[drv 1][bank 0 + 3]
IRQ_ENABLE_BANK_X1E[drv 2][bank 1] = IRQ_ENABLE_BANK[drv 2][bank -1]
= IRQ_ENABLE_BANK[drv 1][bank 5-1]
= IRQ_ENABLE_BANK[drv 1][bank 4]
= IRQ_ENABLE_BANK[drv 1][bank 1 + 3]
Introduce a workaround for the bug by matching the qcom,x1e80100-pdc
compatible and apply the offsets as shown above:
- Bank 0...1: previous DRV region, bank += 3
- Bank 1...4: our DRV region, bank -= 2
- Bank 5: our DRV region, no fixup required
The PDC node in the device tree only describes the DRV region for the Linux
client, but the workaround also requires to map parts of the previous DRV
region to issue writes there. To maintain compatibility with old device
trees, obtain the base address of the preceeding region by applying the
-0x10000 offset. Note that this is also more correct from a conceptual
point of view:
It does not really make use of the other region; it just issues shifted
writes that end up in the registers of the Linux associated DRV region 2.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/all/20250218-x1e80100-pdc-hw-wa-v2-1-29be4c98e355@linaro.org
Restricted pointers ("%pK") are not meant to be used through printk().
It can unintentionally expose security sensitive, raw pointer values.
Use regular pointer formatting instead.
For more background, see:
https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250217-restricted-pointers-uprobes-v1-1-e8cbe5bb22a7@linutronix.de
GCC 15 changed the default C standard version to C23, which should not
have impacted the kernel because it requests the gnu11 standard via
'-std=' in the main Makefile. However, the x86 compressed boot Makefile
uses its own set of KBUILD_CFLAGS without a '-std=' value (i.e., using
the default), resulting in errors from the kernel's definitions of bool,
true, and false in stddef.h, which are reserved keywords under C23.
./include/linux/stddef.h:11:9: error: expected identifier before ‘false’
11 | false = 0,
./include/linux/types.h:35:33: error: two or more data types in declaration specifiers
35 | typedef _Bool bool;
Set '-std=gnu11' in the x86 compressed boot Makefile to resolve the
error and consistently use the same C standard version for the entire
kernel.
Closes: https://lore.kernel.org/4OAhbllK7x4QJGpZjkYjtBYNLd_2whHx9oFiuZcGwtVR4hIzvduultkgfAIRZI3vQpZylu7Gl929HaYFRGeMEalWCpeMzCIIhLxxRhq4U-Y=@protonmail.com/
Closes: https://lore.kernel.org/Z4467umXR2PZ0M1H@tucnak/
Reported-by: Kostadin Shishmanov <kostadinshishmanov@protonmail.com>
Reported-by: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250121-x86-use-std-consistently-gcc-15-v1-1-8ab0acf645cb%40kernel.org
Pull misc fixes from Andrew Morton:
"18 hotfixes. 5 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
10 are for MM and 8 are for non-MM. All are singletons, please see the
changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-19-17-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
test_xarray: fix failure in check_pause when CONFIG_XARRAY_MULTI is not defined
kasan: don't call find_vm_area() in a PREEMPT_RT kernel
MAINTAINERS: update Nick's contact info
selftests/mm: fix check for running THP tests
mm: hugetlb: avoid fallback for specific node allocation of 1G pages
memcg: avoid dead loop when setting memory.max
mailmap: update Nick's entry
mm: pgtable: fix incorrect reclaim of non-empty PTE pages
taskstats: modify taskstats version
getdelays: fix error format characters
mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize()
tools/mm: fix build warnings with musl-libc
mailmap: add entry for Feng Tang
.mailmap: add entries for Jeff Johnson
mm,madvise,hugetlb: check for 0-length range after end address adjustment
mm/zswap: fix inconsistency when zswap_store_page() fails
lib/iov_iter: fix import_iovec_ubuf iovec management
procfs: fix a locking bug in a vmcore_add_device_dump() error path
Fix the brand new xfstest that tries to swapon on a recently unshared
file and use the chance to document the other bit of magic in this
function.
The big comment is taken from a mailinglist post by Dave Chinner.
Fixes: 5e672cd69f0a53 ("xfs: introduce xfs_inodegc_push()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
We had some error handling confusion here;
-BCH_ERR_missing_indirect_extent is thrown by
trans_trigger_reflink_p_segment(); at this point we haven't decide
whether we're generating an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If a file size has bits 0x410 = ATTR_DIRECTORY | ATTR_REPARSE set
then during queryinfo (stat) the file is regarded as a directory
and subsequent opens can fail. A simple test example is trying
to open any file 1040 bytes long when mounting with "posix"
(SMB3.1.1 POSIX/Linux Extensions).
The cause of this bug is that Attributes field in smb2_file_all_info
struct occupies the same place that EndOfFile field in
smb311_posix_qinfo, and sometimes the latter struct is incorrectly
processed as if it was the first one.
Reported-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Tested-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull hardening fixes from Kees Cook:
"Address a KUnit stack initialization regression that got tickled on
m68k, and solve a Clang(v14 and earlier) bug found by 0day:
- Fix stackinit KUnit regression on m68k
- Use ARRAY_SIZE() for memtostr*()/strtomem*()"
* tag 'hardening-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string.h: Use ARRAY_SIZE() for memtostr*()/strtomem*()
compiler.h: Introduce __must_be_byte_array()
compiler.h: Move C string helpers into C-only kernel section
stackinit: Fix comment for test_small_end
stackinit: Keep selftest union size small on m68k
When waking a VM's NX huge page recovery thread, ensure the thread is
actually alive before trying to wake it. Now that the thread is spawned
on-demand during KVM_RUN, a VM without a recovery thread is reachable via
the related module params.
BUG: kernel NULL pointer dereference, address: 0000000000000040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:vhost_task_wake+0x5/0x10
Call Trace:
<TASK>
set_nx_huge_pages+0xcc/0x1e0 [kvm]
param_attr_store+0x8a/0xd0
module_attr_store+0x1a/0x30
kernfs_fop_write_iter+0x12f/0x1e0
vfs_write+0x233/0x3e0
ksys_write+0x60/0xd0
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f3b52710104
</TASK>
Modules linked in: kvm_intel kvm
CR2: 0000000000000040
Fixes: 931656b9e2ff ("kvm: defer huge page recovery vhost task to later")
Cc: stable@vger.kernel.org
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250124234623.3609069-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a possible memory leak in the power capping subsystem (Joe Hattori).
* pm-powercap:
powercap: call put_device() on an error path in powercap_register_control_type()
Linus observed that the symbol_request(utf8_data_table) call fails when
CONFIG_UNICODE=y and CONFIG_TRIM_UNUSED_KSYMS=y.
symbol_get() relies on the symbol data being present in the ksymtab for
symbol lookups. However, EXPORT_SYMBOL_GPL(utf8_data_table) is dropped
due to CONFIG_TRIM_UNUSED_KSYMS, as no module references it in this case.
Probably, this has been broken since commit dbacb0ef670d ("kconfig option
for TRIM_UNUSED_KSYMS").
This commit addresses the issue by leveraging modpost. Symbol names
passed to symbol_get() are recorded in the special .no_trim_symbol
section, which is then parsed by modpost to forcibly keep such symbols.
The .no_trim_symbol section is discarded by the linker scripts, so there
is no impact on the size of the final vmlinux or modules.
This commit cannot resolve the issue for direct calls to __symbol_get()
because the symbol name is not known at compile-time.
Although symbol_get() may eventually be deprecated, this workaround
should be good enough meanwhile.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull irq Kconfig cleanup from Borislav Petkov:
- Remove an unused config item GENERIC_PENDING_IRQ_CHIPFLAGS
* tag 'irq_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Remove unused CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGS
As PD2.0 spec ("6.5.6.2 PSSourceOffTimer")，the PSSourceOffTimer is
used by the Policy Engine in Dual-Role Power device that is currently
acting as a Sink to timeout on a PS_RDY Message during a Power Role
Swap sequence. This condition leads to a Hard Reset for USB Type-A and
Type-B Plugs and Error Recovery for Type-C plugs and return to USB
Default Operation.
Therefore, after PSSourceOffTimer timeout, the tcpm state machine should
switch from PR_SWAP_SNK_SRC_SINK_OFF to ERROR_RECOVERY. This can also
solve the test items in the USB power delivery compliance test:
TEST.PD.PROT.SNK.12 PR_Swap – PSSourceOffTimer Timeout
[1] https://usb.org/document-library/usb-power-delivery-compliance-test-specification-0/USB_PD3_CTS_Q4_2025_OR.zip
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <stable@kernel.org>
Signed-off-by: Jos Wang <joswang@lenovo.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Amit Sunil Dhamne <amitsd@google.com>
Link: https://lore.kernel.org/r/20250213134921.3798-1-joswang1221@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If ->iobase is set the default will be UPIO_PORT for ->iotype after
the uart_read_and_validate_port_properties() call. Hence no need
to assign that explicitly. Otherwise it will be UPIO_MEM.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250124161530.398361-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_OBJTOOL=y or CONFIG_DEBUG_INFO_BTF=y, parallel builds
show awkward "mkdir -p ..." logs.
$ make -j16
[ snip ]
mkdir -p /home/masahiro/ref/linux/tools/objtool && make O=/home/masahiro/ref/linux subdir=tools/objtool --no-print-directory -C objtool
mkdir -p /home/masahiro/ref/linux/tools/bpf/resolve_btfids && make O=/home/masahiro/ref/linux subdir=tools/bpf/resolve_btfids --no-print-directory -C bpf/resolve_btfids
Defining MAKEFLAGS=<value> on the command line wipes out command line
switches from the resultant MAKEFLAGS definition, even though the command
line switches are active. [1]
MAKEFLAGS puts all single-letter options into the first word, and that
word will be empty if no single-letter options were given. [2]
However, this breaks if MAKEFLAGS=<value> is given on the command line.
The tools/ and tools/% targets set MAKEFLAGS=<value> on the command
line, which breaks the following code in tools/scripts/Makefile.include:
short-opts := $(firstword -$(MAKEFLAGS))
If MAKEFLAGS really needs modification, it should be done through the
environment variable, as follows:
MAKEFLAGS=<value> $(MAKE) ...
That said, I question whether modifying MAKEFLAGS is necessary here.
The only flag we might want to exclude is --no-print-directory, as the
tools build system changes the working directory. However, people might
find the "Entering/Leaving directory" logs annoying.
I simply removed the offending MAKEFLAGS=<value>.
[1]: https://savannah.gnu.org/bugs/?62469
[2]: https://www.gnu.org/software/make/manual/make.html#Testing-Flags
Fixes: ea01fa9f63ae ("tools: Connect to the kernel build system")
Fixes: a50e43332756 ("perf tools: Honor parallel jobs")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Pull tracing fixes from Steven Rostedt:
"Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to
ftrace. The manager ops does not have any callback but calls the
sub-ops callbacks. The manage ops hashes (what is used to tell
ftrace what functions to attach to) is built on the sub-ops it
manages.
There was an error in the way it built the hash. An empty hash
means to attach to all functions. When the manager ops had one
sub-ops it properly copied its hash. But when the manager ops had
more than one sub-ops, it went into a loop to make a set of all
functions it needed to add to the hash. If any of the subops hashes
was empty, that would mean to attach to all functions. The error
was that the first iteration of the loop passed in an empty hash to
start with in order to add the other hashes. That starting hash was
mistaken as to attach to all functions. This made the manage ops
attach to all functions whenever it had two or more sub-ops, even
if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for
that function will be added to the manager ops for each subops.
This causes waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is
attached to. It also has a counter of how many fprobes are
attached. When the last fprobe is removed, it unregisters the
fprobe from ftrace but does not remove the functions the last
fprobe was attached to from the hash. This leaves the old functions
attached. When a new fprobe is added, the fprobe infrastructure
attaches to not only the functions of the new fprobe, but also to
the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes
from zero to one, it attaches its ops to ftrace. When an fprobe is
removed, the counter is decremented. If the counter goes from 1 to
zero, it removes the fprobes ops from ftrace.
There was an issue where if two fprobes trace the same function,
the addition of each fprobe would increment the counter. But when
removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not
remove the functions from the ftrace ops.
But it also did not decrement the counter, so when the last fprobe
is removed, the counter is still one. This leaves the fprobes
callback still registered with ftrace and it being called by the
functions defined by the fprobes ops hash. Worse yet, because all
the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions.
Thus, this puts the state of the system where every function is
calling the fprobe callback handler (which does nothing as there
are no registered fprobes), but this causes a good 13% slow down of
the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which
added another layer of preempt disable. As the preempt_count gets
traced in the event, it needs to subtract the amount of preempt
disabling the tracer does to record what the preempt_count was when
the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that
is set by the return of the next() function. The start() function
allocates it and the stop() function frees it. But when the last
item is found, the next() returns NULL which leaks the data that
was allocated in start(). The m->private is used for something
else, so have next() free the data when it returns NULL, as stop()
will then just receive NULL in that case"
* tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak when reading set_event file
ftrace: Correct preemption accounting for function tracing.
selftests/ftrace: Update fprobe test to check enabled_functions file
fprobe: Fix accounting of when to unregister from function graph
fprobe: Always unregister fgraph function from ops
ftrace: Do not add duplicate entries in subops manager ops
ftrace: Fix accounting of adding subops to a manager ops
The cmma_test_essa() inline assembly uses tmp as input and output, however
tmp is specified as output only, which allows the compiler to optimize the
initialization of tmp away.
Therefore the ESSA detection may or may not work depending on previous
contents of the register that the compiler selected for tmp.
Fix this by using the correct constraint modifier.
Fixes: 468a3bc2b7b9 ("s390/cmma: move parsing of cmma kernel parameter to early boot code")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The jcore-aic irqchip does not have separate interrupt numbers reserved for
cpu-local vs global interrupts. Therefore the device drivers need to
request the given interrupt as per CPU interrupt.
69a9dcbd2d65 ("clocksource/drivers/jcore: Use request_percpu_irq()")
converted the clocksource driver over to request_percpu_irq(), but failed
to do add all the required changes, resulting in a failure to register PIT
interrupts.
Fix this by:
1) Explicitly mark the interrupt via irq_set_percpu_devid() in
jcore_pit_init().
2) Enable and disable the per CPU interrupt in the CPU hotplug callbacks.
3) Pass the correct per-cpu cookie to the irq handler by using
handle_percpu_devid_irq() instead of handle_percpu_irq() in
handle_jcore_irq().
[ tglx: Massage change log ]
Fixes: 69a9dcbd2d65 ("clocksource/drivers/jcore: Use request_percpu_irq()")
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/all/20250216175545.35079-3-contact@artur-rojek.eu
drivers/i2c/i2c-core-base.c: In function ‘i2c_detect.isra’:
drivers/i2c/i2c-core-base.c:2544:1: warning: the frame size of 1312 bytes is larger than 1024 bytes [-Wframe-larger-than=]
2544 | }
| ^
Fix this by allocating the temporary client structure dynamically, as it
is a rather large structure (1216 bytes, depending on kernel config).
This is basically a revert of the to-be-fixed commit with some
checkpatch improvements.
Fixes: 735668f8e5c9 ("i2c: core: Allocate temp client on the stack in i2c_detect")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
[wsa: updated commit message, merged tags from similar patch]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The previous implementation incorrectly configured the cmn_interrupt_2_enable
register for interrupt handling. Using cmn_interrupt_2_enable to configure
Tag, Data RAM ECC interrupts would lead to issues like double handling of the
interrupts (EL1 and EL3) as cmn_interrupt_2_enable is meant to be configured
for interrupts which needs to be handled by EL3.
EL1 LLCC EDAC driver needs to use cmn_interrupt_0_enable register to configure
Tag, Data RAM ECC interrupts instead of cmn_interrupt_2_enable.
Fixes: 27450653f1db ("drivers: edac: Add EDAC driver support for QCOM SoCs")
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20241119064608.12326-1-quic_kbajaj@quicinc.com
Pull x86 fixes from Ingo Molnar:
- Fix AVX-VNNI CPU feature dependency bug triggered via the 'noxsave'
boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
* tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
docs: arch/x86/sva: Fix two grammar errors under Background and FAQ
x86/cpufeatures: Make AVX-VNNI depend on AVX
MAINTAINERS: Change maintainer for RDT
Add check for the return value of cifs_buf_get() and cifs_small_buf_get()
in receive_encrypted_standard() to prevent null pointer dereference.
Fixes: eec04ea11969 ("smb: client: fix OOB in receive_encrypted_standard()")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull Kbuild fixes from Masahiro Yamada:
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
* tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix a few typos in a comment
kbuild: userprogs: fix bitsize and target detection on clang
kbuild: fix linux-headers package build when $(CC) cannot link userspace
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
Pull rseq fixes from Ingo Molnar:
- Fix overly spread-out RSEQ concurrency ID allocation pattern that
regressed certain workloads
- Fix RSEQ registration syscall behavior on -EFAULT errors when
CONFIG_DEBUG_RSEQ=y (This debug option is disabled on most
distributions)
* tag 'sched-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Fix rseq registration with CONFIG_DEBUG_RSEQ
sched: Compact RSEQ concurrency IDs with reduced threads and affinity
Pull smb client fixes from Steve French:
- Fix for chmod regression
- Two reparse point related fixes
- One minor cleanup (for GCC 14 compiles)
- Fix for SMB3.1.1 POSIX Extensions reporting incorrect file type
* tag 'v6.14-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Treat unhandled directory name surrogate reparse points as mount directory nodes
cifs: Throw -EOPNOTSUPP error on unsupported reparse point type from parse_reparse_point()
smb311: failure to open files of length 1040 when mounting with SMB3.1.1 POSIX extensions
smb: client, common: Avoid multiple -Wflex-array-member-not-at-end warnings
smb: client: fix chmod(2) regression with ATTR_READONLY
Pull Kbuild fixes from Masahiro Yamada:
- Suppress false-positive -Wformat-{overflow,truncation}-non-kprintf
warnings regardless of the W= option
- Avoid CONFIG_TRIM_UNUSED_KSYMS dropping symbols passed to symbol_get()
- Fix a build regression of the Debian linux-headers package
* tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: add missing quotation marks for CC variable
kbuild: fix misspelling in scripts/Makefile.lib
kbuild: keep symbols for symbol_get() even with CONFIG_TRIM_UNUSED_KSYMS
scripts/Makefile.extrawarn: Do not show clang's non-kprintf warnings at W=1
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
Pull perf event fixes from Ingo Molnar:
"Fix x86 Intel Lion Cove CPU event constraints, and fix uprobes
debug/error printk output pointer-value verbosity"
* tag 'perf-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix event constraints for LNC
uprobes: Don't use %pK through printk
With CONFIG_DEBUG_RSEQ=y, at rseq registration the read-only fields are
copied from user-space, if this copy fails the syscall returns -EFAULT
and the registration should not be activated - but it erroneously is.
Move the activation of the registration after the copy of the fields to
fix this bug.
Fixes: 7d5265ffcd8b ("rseq: Validate read-only fields under DEBUG_RSEQ config")
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20250219205330.324770-1-mjeanson@efficios.com
The 'noxsave' boot option disables support for AVX, but support for the
AVX-VNNI feature was still declared on CPUs that support it. Fix this.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250220060124.89622-1-ebiggers@kernel.org
Pull bcachefs fixes from Kent Overstreet:
"Small stuff:
- The fsck code for Hongbo's directory i_size patch was wrong, caught
by transaction restart injection: we now have the CI running
another test variant with restart injection enabled
- Another fixup for reflink pointers to missing indirect extents:
previous fix was for fsck code, this fixes the normal runtime paths
- Another small srcu lock hold time fix, reported by jpsollie"
* tag 'bcachefs-2025-02-20' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix srcu lock warning in btree_update_nodes_written()
bcachefs: Fix bch2_indirect_extent_missing_error()
bcachefs: Fix fsck directory i_size checking
If the reparse point was not handled (indicated by the -EOPNOTSUPP from
ops->parse_reparse_point() call) but reparse tag is of type name surrogate
directory type, then treat is as a new mount point.
Name surrogate reparse point represents another named entity in the system.
From SMB client point of view, this another entity is resolved on the SMB
server, and server serves its content automatically. Therefore from Linux
client point of view, this name surrogate reparse point of directory type
crosses mount point.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull power management fix from Rafael Wysocki:
"Fix a recently introduced kernel crash due to a NULL pointer
dereference during system-wide suspend (Rafael Wysocki)"
* tag 'pm-6.14-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Restrict power.set_active propagation
While attempting to build a Debian packages with CC="ccache gcc", I
saw the following error as builddeb builds linux-headers-$KERNELVERSION:
make HOSTCC=ccache gcc VPATH= srcroot=. -f ./scripts/Makefile.build obj=debian/linux-headers-6.14.0-rc1/usr/src/linux-headers-6.14.0-rc1/scripts
make[6]: *** No rule to make target 'gcc'. Stop.
Upon investigation, it seems that one instance of $(CC) variable reference
in ./scripts/package/install-extmod-build was missing quotation marks,
causing the above error.
Add the missing quotation marks around $(CC) to fix build.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package")
Co-developed-by: Mingcong Bai <jeffbai@aosc.io>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Tested-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for some reported problems.
Nothing major, just:
- sc16is7xx irq check fix
- 8250 fifo underflow fix
- serial_port and 8250 iotype fixes
Most of these have been in linux-next already, and all have passed
0-day testing"
* tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Fix fifo underflow on flush
serial: 8250_pnp: Remove unneeded ->iotype assignment
serial: 8250_platform: Remove unneeded ->iotype assignment
serial: 8250_of: Remove unneeded ->iotype assignment
serial: port: Make ->iotype validation global in __uart_read_properties()
serial: port: Always update ->iotype in __uart_read_properties()
serial: port: Assign ->iotype correctly when ->iobase is set
serial: sc16is7xx: Fix IRQ number check behavior
This introduces a module for working with faux devices in rust, along with
adding sample code to show how the API is used. Unlike other types of
devices, we don't provide any hooks for device probe/removal - since these
are optional for the faux API and are unnecessary in rust.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Maíra Canal <mairacanal@riseup.net>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/2025021026-exert-accent-b4c6@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scripts/Makefile.clang was changed in the linked commit to move --target from
KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope.
However that variable is not inspected by the userprogs logic,
breaking cross compilation on clang.
Use both variables to detect bitsize and target arguments for userprogs.
Fixes: feb843a469fb ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull irq fixes from Ingo Molnar:
"Fix miscellaneous irqchip bugs"
* tag 'irq-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom-pdc: Workaround hardware register bug on X1E80100
irqchip/jcore-aic, clocksource/drivers/jcore: Fix jcore-pit interrupt request
irqchip/gic-v3: Fix rk3399 workaround when secure interrupts are enabled
According to the latest event list, update the event constraint tables
for Lion Cove core.
The general rule (the event codes < 0x90 are restricted to counters
0-3.) has been removed. There is no restriction for most of the
performance monitoring events.
Fixes: a932aa0e868f ("perf/x86: Add Lunar Lake and Arrow Lake support")
Reported-by: Amiri Khalil <amiri.khalil@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250219141005.2446823-1-kan.liang@linux.intel.com
When a process reduces its number of threads or clears bits in its CPU
affinity mask, the mm_cid allocation should eventually converge towards
smaller values.
However, the change introduced by:
commit 7e019dcc470f ("sched: Improve cache locality of RSEQ concurrency
IDs for intermittent workloads")
adds a per-mm/CPU recent_cid which is never unset unless a thread
migrates.
This is a tradeoff between:
A) Preserving cache locality after a transition from many threads to few
threads, or after reducing the hamming weight of the allowed CPU mask.
B) Making the mm_cid upper bounds wrt nr threads and allowed CPU mask
easy to document and understand.
C) Allowing applications to eventually react to mm_cid compaction after
reduction of the nr threads or allowed CPU mask, making the tracking
of mm_cid compaction easier by shrinking it back towards 0 or not.
D) Making sure applications that periodically reduce and then increase
again the nr threads or allowed CPU mask still benefit from good
cache locality with mm_cid.
Introduce the following changes:
* After shrinking the number of threads or reducing the number of
allowed CPUs, reduce the value of max_nr_cid so expansion of CID
allocation will preserve cache locality if the number of threads or
allowed CPUs increase again.
* Only re-use a recent_cid if it is within the max_nr_cid upper bound,
else find the first available CID.
Fixes: 7e019dcc470f ("sched: Improve cache locality of RSEQ concurrency IDs for intermittent workloads")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lkml.kernel.org/r/20250210153253.460471-2-gmonaco@redhat.com
Due to job transition, I am stepping down as RDT maintainer.
Add Tony as a co-maintainer.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20250131190731.3981085-1-fenghua.yu%40intel.com
Pull xfs fixes from Carlos Maiolino:
"Just a collection of bug fixes, nothing really stands out"
* tag 'xfs-fixes-6.14-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: flush inodegc before swapon
xfs: rename xfs_iomap_swapfile_activate to xfs_vm_swap_activate
xfs: Do not allow norecovery mount with quotacheck
xfs: do not check NEEDSREPAIR if ro,norecovery mount.
xfs: fix data fork format filtering during inode repair
xfs: fix online repair probing when CONFIG_XFS_ONLINE_REPAIR=n
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after the
rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully
emulated guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
- move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code.
As an initial set of cleanups, move some code from mm/gmap into kvm
and start using __kvm_faultin_pfn() to fault-in pages as needed;
but especially stop abusing page->index and page->lru to aid in the
pgdesc conversion.
x86:
- Add missing check in the fix to defer starting the huge page
recovery vhost_task
- SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
KVM: remove kvm_arch_post_init_vm
KVM: selftests: Fix spelling mistake "initally" -> "initially"
kvm: x86: SRSO_USER_KERNEL_NO is not synthesized
KVM: arm64: timer: Don't adjust the EL2 virtual timer offset
KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV
KVM: arm64: timer: Always evaluate the need for a soft timer
KVM: arm64: Fix nested S2 MMU structures reallocation
KVM: arm64: Fail protected mode init if no vgic hardware is present
KVM: arm64: Flush/sync debug state in protected mode
KVM: s390: selftests: Streamline uc_skey test to issue iske after sske
KVM: s390: remove the last user of page->index
KVM: s390: move PGSTE softbits
KVM: s390: remove useless page->index usage
KVM: s390: move gmap_shadow_pgt_lookup() into kvm
KVM: s390: stop using lists to keep track of used dat tables
KVM: s390: stop using page->index for non-shadow gmaps
KVM: s390: move some gmap shadowing functions away from mm/gmap.c
KVM: s390: get rid of gmap_translate()
KVM: s390: get rid of gmap_fault()
...
Commit 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of
parents and children") exposed an issue related to simple_pm_bus_pm_ops
that uses pm_runtime_force_suspend() and pm_runtime_force_resume() as
bus type PM callbacks for the noirq phases of system-wide suspend and
resume.
The problem is that pm_runtime_force_suspend() does not distinguish
runtime-suspended devices from devices for which runtime PM has never
been enabled, so if it sees a device with runtime PM status set to
RPM_ACTIVE, it will assume that runtime PM is enabled for that device
and so it will attempt to suspend it with the help of its runtime PM
callbacks which may not be ready for that. As it turns out, this
causes simple_pm_bus_runtime_suspend() to crash due to a NULL pointer
dereference.
Another problem related to the above commit and simple_pm_bus_pm_ops is
that setting runtime PM status of a device handled by the latter to
RPM_ACTIVE will actually prevent it from being resumed because
pm_runtime_force_resume() only resumes devices with runtime PM status
set to RPM_SUSPENDED.
To mitigate these issues, do not allow power.set_active to propagate
beyond the parent of the device with DPM_FLAG_SMART_SUSPEND set that
will need to be resumed, which should be a sufficient stop-gap for the
time being, but they will need to be properly addressed in the future
because in general during system-wide resume it is necessary to resume
all devices in a dependency chain in which at least one device is going
to be resumed.
Fixes: 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of parents and children")
Closes: https://lore.kernel.org/linux-pm/1c2433d4-7e0f-4395-b841-b8eac7c25651@nvidia.com/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6137505.lOV4Wx5bFT@rjwysocki.net
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes, and new device ids, for
6.14-rc3. Lots of tiny stuff for reported problems, including:
- new device ids and quirks
- usb hub crash fix found by syzbot
- dwc2 driver fix
- dwc3 driver fixes
- uvc gadget driver fix
- cdc-acm driver fixes for a variety of different issues
- other tiny bugfixes
Almost all of these have been in linux-next this week, and all have
passed 0-day testing"
* tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY
usb: roles: set switch registered flag early on
usb: gadget: uvc: Fix unstarted kthread worker
USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist
usb: gadget: core: flush gadget workqueue after device removal
USB: gadget: f_midi: f_midi_complete to call queue_work
usb: core: fix pipe creation for get_bMaxPacketSize0
usb: dwc3: Fix timeout issue during controller enter/exit from halt state
USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone
USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk
usb: cdc-acm: Fix handling of oversized fragments
usb: cdc-acm: Check control transfer buffer size before access
usb: xhci: Restore xhci_pci support for Renesas HCs
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI
USB: serial: option: drop MeiG Smart defines
USB: serial: option: fix Telit Cinterion FN990A name
USB: serial: option: add Telit Cinterion FN990B compositions
USB: serial: option: add MeiG Smart SLM828
usb: gadget: f_midi: fix MIDI Streaming descriptor lengths
usb: dwc2: gadget: remove of_node reference upon udc_stop
...
When flushing the serial port's buffer, uart_flush_buffer() calls
kfifo_reset() but if there is an outstanding DMA transfer then the
completion function will consume data from the kfifo via
uart_xmit_advance(), underflowing and leading to ongoing DMA as the
driver tries to transmit another 2^32 bytes.
This is readily reproduced with serial-generic and amidi sending even
short messages as closing the device on exit will wait for the fifo to
drain and in the underflow case amidi hangs for 30 seconds on exit in
tty_wait_until_sent(). A trace of that gives:
kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3
amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo
irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3
irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293
irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197
irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101
irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096
Since the port lock is held in when the kfifo is reset in
uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer
hook to adjust the outstanding DMA byte count is sufficient to avoid the
kfifo underflow.
Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable <stable@kernel.org>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20250208124148.1189191-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many drivers abuse the platform driver/bus system as it provides a
simple way to create and bind a device to a driver-specific set of
probe/release functions. Instead of doing that, and wasting all of the
memory associated with a platform device, here is a "faux" bus that
can be used instead.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/2025021026-atlantic-gibberish-3f0c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling
linux-headers package"), the linux-headers Debian package fails to
build when $(CC) cannot build userspace applications, for example,
when using toolchains installed by the 0day bot.
The host programs in the linux-headers package should be rebuilt using
the disto's cross-compiler, ${DEB_HOST_GNU_TYPE}-gcc instead of $(CC).
Hence, the variable 'CC' must be expanded in this shell script instead
of in the top-level Makefile.
Commit f354fc88a72a ("kbuild: install-extmod-build: add missing
quotation marks for CC variable") was not a correct fix because
CC="ccache gcc" should be unrelated when rebuilding userspace tools.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package")
Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-kbuild/CAK7LNARb3xO3ptBWOMpwKcyf3=zkfhMey5H2KnB1dOmUwM79dA@mail.gmail.com/T/#t
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Pull s390 fixes from Vasily Gorbik:
- Fix inline asm constraint in cmma_test_essa() to avoid potential ESSA
detection miscompilation
- Fix build failure with CONFIG_GENDWARFKSYMS by disabling purgatory
symbol exports with -D__DISABLE_EXPORTS
- Update defconfigs
* tag 's390-6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Fix ESSA detection
s390/purgatory: Use -D__DISABLE_EXPORTS
s390: Update defconfigs
On X1E80100, there is a hardware bug in the register logic of the
IRQ_ENABLE_BANK register: While read accesses work on the normal address,
all write accesses must be made to a shifted address. Without a workaround
for this, the wrong interrupt gets enabled in the PDC and it is impossible
to wakeup from deep suspend (CX collapse). This has not caused problems so
far, because the deep suspend state was not enabled. A workaround is
required now since work is ongoing to fix this.
The PDC has multiple "DRV" regions, each one has a size of 0x10000 and
provides the same set of registers for a particular client in the system.
Linux is one the clients and uses DRV region 2 on X1E. Each "bank" inside
the DRV region consists of 32 interrupt pins that can be enabled using the
IRQ_ENABLE_BANK register:
IRQ_ENABLE_BANK[bank] = base + IRQ_ENABLE_BANK + bank * sizeof(u32)
On X1E, this works as intended for read access. However, write access to
most banks is shifted by 2:
IRQ_ENABLE_BANK_X1E[0] = IRQ_ENABLE_BANK[-2]
IRQ_ENABLE_BANK_X1E[1] = IRQ_ENABLE_BANK[-1]
IRQ_ENABLE_BANK_X1E[2] = IRQ_ENABLE_BANK[0] = IRQ_ENABLE_BANK[2 - 2]
IRQ_ENABLE_BANK_X1E[3] = IRQ_ENABLE_BANK[1] = IRQ_ENABLE_BANK[3 - 2]
IRQ_ENABLE_BANK_X1E[4] = IRQ_ENABLE_BANK[2] = IRQ_ENABLE_BANK[4 - 2]
IRQ_ENABLE_BANK_X1E[5] = IRQ_ENABLE_BANK[5] (this one works as intended)
The negative indexes underflow to banks of the previous DRV/client region:
IRQ_ENABLE_BANK_X1E[drv 2][bank 0] = IRQ_ENABLE_BANK[drv 2][bank -2]
= IRQ_ENABLE_BANK[drv 1][bank 5-2]
= IRQ_ENABLE_BANK[drv 1][bank 3]
= IRQ_ENABLE_BANK[drv 1][bank 0 + 3]
IRQ_ENABLE_BANK_X1E[drv 2][bank 1] = IRQ_ENABLE_BANK[drv 2][bank -1]
= IRQ_ENABLE_BANK[drv 1][bank 5-1]
= IRQ_ENABLE_BANK[drv 1][bank 4]
= IRQ_ENABLE_BANK[drv 1][bank 1 + 3]
Introduce a workaround for the bug by matching the qcom,x1e80100-pdc
compatible and apply the offsets as shown above:
- Bank 0...1: previous DRV region, bank += 3
- Bank 1...4: our DRV region, bank -= 2
- Bank 5: our DRV region, no fixup required
The PDC node in the device tree only describes the DRV region for the Linux
client, but the workaround also requires to map parts of the previous DRV
region to issue writes there. To maintain compatibility with old device
trees, obtain the base address of the preceeding region by applying the
-0x10000 offset. Note that this is also more correct from a conceptual
point of view:
It does not really make use of the other region; it just issues shifted
writes that end up in the registers of the Linux associated DRV region 2.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/all/20250218-x1e80100-pdc-hw-wa-v2-1-29be4c98e355@linaro.org
Restricted pointers ("%pK") are not meant to be used through printk().
It can unintentionally expose security sensitive, raw pointer values.
Use regular pointer formatting instead.
For more background, see:
https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250217-restricted-pointers-uprobes-v1-1-e8cbe5bb22a7@linutronix.de
GCC 15 changed the default C standard version to C23, which should not
have impacted the kernel because it requests the gnu11 standard via
'-std=' in the main Makefile. However, the x86 compressed boot Makefile
uses its own set of KBUILD_CFLAGS without a '-std=' value (i.e., using
the default), resulting in errors from the kernel's definitions of bool,
true, and false in stddef.h, which are reserved keywords under C23.
./include/linux/stddef.h:11:9: error: expected identifier before ‘false’
11 | false = 0,
./include/linux/types.h:35:33: error: two or more data types in declaration specifiers
35 | typedef _Bool bool;
Set '-std=gnu11' in the x86 compressed boot Makefile to resolve the
error and consistently use the same C standard version for the entire
kernel.
Closes: https://lore.kernel.org/4OAhbllK7x4QJGpZjkYjtBYNLd_2whHx9oFiuZcGwtVR4hIzvduultkgfAIRZI3vQpZylu7Gl929HaYFRGeMEalWCpeMzCIIhLxxRhq4U-Y=@protonmail.com/
Closes: https://lore.kernel.org/Z4467umXR2PZ0M1H@tucnak/
Reported-by: Kostadin Shishmanov <kostadinshishmanov@protonmail.com>
Reported-by: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250121-x86-use-std-consistently-gcc-15-v1-1-8ab0acf645cb%40kernel.org
Pull misc fixes from Andrew Morton:
"18 hotfixes. 5 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
10 are for MM and 8 are for non-MM. All are singletons, please see the
changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-19-17-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
test_xarray: fix failure in check_pause when CONFIG_XARRAY_MULTI is not defined
kasan: don't call find_vm_area() in a PREEMPT_RT kernel
MAINTAINERS: update Nick's contact info
selftests/mm: fix check for running THP tests
mm: hugetlb: avoid fallback for specific node allocation of 1G pages
memcg: avoid dead loop when setting memory.max
mailmap: update Nick's entry
mm: pgtable: fix incorrect reclaim of non-empty PTE pages
taskstats: modify taskstats version
getdelays: fix error format characters
mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize()
tools/mm: fix build warnings with musl-libc
mailmap: add entry for Feng Tang
.mailmap: add entries for Jeff Johnson
mm,madvise,hugetlb: check for 0-length range after end address adjustment
mm/zswap: fix inconsistency when zswap_store_page() fails
lib/iov_iter: fix import_iovec_ubuf iovec management
procfs: fix a locking bug in a vmcore_add_device_dump() error path
Fix the brand new xfstest that tries to swapon on a recently unshared
file and use the chance to document the other bit of magic in this
function.
The big comment is taken from a mailinglist post by Dave Chinner.
Fixes: 5e672cd69f0a53 ("xfs: introduce xfs_inodegc_push()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
If a file size has bits 0x410 = ATTR_DIRECTORY | ATTR_REPARSE set
then during queryinfo (stat) the file is regarded as a directory
and subsequent opens can fail. A simple test example is trying
to open any file 1040 bytes long when mounting with "posix"
(SMB3.1.1 POSIX/Linux Extensions).
The cause of this bug is that Attributes field in smb2_file_all_info
struct occupies the same place that EndOfFile field in
smb311_posix_qinfo, and sometimes the latter struct is incorrectly
processed as if it was the first one.
Reported-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Tested-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull hardening fixes from Kees Cook:
"Address a KUnit stack initialization regression that got tickled on
m68k, and solve a Clang(v14 and earlier) bug found by 0day:
- Fix stackinit KUnit regression on m68k
- Use ARRAY_SIZE() for memtostr*()/strtomem*()"
* tag 'hardening-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string.h: Use ARRAY_SIZE() for memtostr*()/strtomem*()
compiler.h: Introduce __must_be_byte_array()
compiler.h: Move C string helpers into C-only kernel section
stackinit: Fix comment for test_small_end
stackinit: Keep selftest union size small on m68k
When waking a VM's NX huge page recovery thread, ensure the thread is
actually alive before trying to wake it. Now that the thread is spawned
on-demand during KVM_RUN, a VM without a recovery thread is reachable via
the related module params.
BUG: kernel NULL pointer dereference, address: 0000000000000040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:vhost_task_wake+0x5/0x10
Call Trace:
<TASK>
set_nx_huge_pages+0xcc/0x1e0 [kvm]
param_attr_store+0x8a/0xd0
module_attr_store+0x1a/0x30
kernfs_fop_write_iter+0x12f/0x1e0
vfs_write+0x233/0x3e0
ksys_write+0x60/0xd0
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f3b52710104
</TASK>
Modules linked in: kvm_intel kvm
CR2: 0000000000000040
Fixes: 931656b9e2ff ("kvm: defer huge page recovery vhost task to later")
Cc: stable@vger.kernel.org
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250124234623.3609069-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus observed that the symbol_request(utf8_data_table) call fails when
CONFIG_UNICODE=y and CONFIG_TRIM_UNUSED_KSYMS=y.
symbol_get() relies on the symbol data being present in the ksymtab for
symbol lookups. However, EXPORT_SYMBOL_GPL(utf8_data_table) is dropped
due to CONFIG_TRIM_UNUSED_KSYMS, as no module references it in this case.
Probably, this has been broken since commit dbacb0ef670d ("kconfig option
for TRIM_UNUSED_KSYMS").
This commit addresses the issue by leveraging modpost. Symbol names
passed to symbol_get() are recorded in the special .no_trim_symbol
section, which is then parsed by modpost to forcibly keep such symbols.
The .no_trim_symbol section is discarded by the linker scripts, so there
is no impact on the size of the final vmlinux or modules.
This commit cannot resolve the issue for direct calls to __symbol_get()
because the symbol name is not known at compile-time.
Although symbol_get() may eventually be deprecated, this workaround
should be good enough meanwhile.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As PD2.0 spec ("6.5.6.2 PSSourceOffTimer")，the PSSourceOffTimer is
used by the Policy Engine in Dual-Role Power device that is currently
acting as a Sink to timeout on a PS_RDY Message during a Power Role
Swap sequence. This condition leads to a Hard Reset for USB Type-A and
Type-B Plugs and Error Recovery for Type-C plugs and return to USB
Default Operation.
Therefore, after PSSourceOffTimer timeout, the tcpm state machine should
switch from PR_SWAP_SNK_SRC_SINK_OFF to ERROR_RECOVERY. This can also
solve the test items in the USB power delivery compliance test:
TEST.PD.PROT.SNK.12 PR_Swap – PSSourceOffTimer Timeout
[1] https://usb.org/document-library/usb-power-delivery-compliance-test-specification-0/USB_PD3_CTS_Q4_2025_OR.zip
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <stable@kernel.org>
Signed-off-by: Jos Wang <joswang@lenovo.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Amit Sunil Dhamne <amitsd@google.com>
Link: https://lore.kernel.org/r/20250213134921.3798-1-joswang1221@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If ->iobase is set the default will be UPIO_PORT for ->iotype after
the uart_read_and_validate_port_properties() call. Hence no need
to assign that explicitly. Otherwise it will be UPIO_MEM.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250124161530.398361-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_OBJTOOL=y or CONFIG_DEBUG_INFO_BTF=y, parallel builds
show awkward "mkdir -p ..." logs.
$ make -j16
[ snip ]
mkdir -p /home/masahiro/ref/linux/tools/objtool && make O=/home/masahiro/ref/linux subdir=tools/objtool --no-print-directory -C objtool
mkdir -p /home/masahiro/ref/linux/tools/bpf/resolve_btfids && make O=/home/masahiro/ref/linux subdir=tools/bpf/resolve_btfids --no-print-directory -C bpf/resolve_btfids
Defining MAKEFLAGS=<value> on the command line wipes out command line
switches from the resultant MAKEFLAGS definition, even though the command
line switches are active. [1]
MAKEFLAGS puts all single-letter options into the first word, and that
word will be empty if no single-letter options were given. [2]
However, this breaks if MAKEFLAGS=<value> is given on the command line.
The tools/ and tools/% targets set MAKEFLAGS=<value> on the command
line, which breaks the following code in tools/scripts/Makefile.include:
short-opts := $(firstword -$(MAKEFLAGS))
If MAKEFLAGS really needs modification, it should be done through the
environment variable, as follows:
MAKEFLAGS=<value> $(MAKE) ...
That said, I question whether modifying MAKEFLAGS is necessary here.
The only flag we might want to exclude is --no-print-directory, as the
tools build system changes the working directory. However, people might
find the "Entering/Leaving directory" logs annoying.
I simply removed the offending MAKEFLAGS=<value>.
[1]: https://savannah.gnu.org/bugs/?62469
[2]: https://www.gnu.org/software/make/manual/make.html#Testing-Flags
Fixes: ea01fa9f63ae ("tools: Connect to the kernel build system")
Fixes: a50e43332756 ("perf tools: Honor parallel jobs")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Pull tracing fixes from Steven Rostedt:
"Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to
ftrace. The manager ops does not have any callback but calls the
sub-ops callbacks. The manage ops hashes (what is used to tell
ftrace what functions to attach to) is built on the sub-ops it
manages.
There was an error in the way it built the hash. An empty hash
means to attach to all functions. When the manager ops had one
sub-ops it properly copied its hash. But when the manager ops had
more than one sub-ops, it went into a loop to make a set of all
functions it needed to add to the hash. If any of the subops hashes
was empty, that would mean to attach to all functions. The error
was that the first iteration of the loop passed in an empty hash to
start with in order to add the other hashes. That starting hash was
mistaken as to attach to all functions. This made the manage ops
attach to all functions whenever it had two or more sub-ops, even
if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for
that function will be added to the manager ops for each subops.
This causes waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is
attached to. It also has a counter of how many fprobes are
attached. When the last fprobe is removed, it unregisters the
fprobe from ftrace but does not remove the functions the last
fprobe was attached to from the hash. This leaves the old functions
attached. When a new fprobe is added, the fprobe infrastructure
attaches to not only the functions of the new fprobe, but also to
the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes
from zero to one, it attaches its ops to ftrace. When an fprobe is
removed, the counter is decremented. If the counter goes from 1 to
zero, it removes the fprobes ops from ftrace.
There was an issue where if two fprobes trace the same function,
the addition of each fprobe would increment the counter. But when
removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not
remove the functions from the ftrace ops.
But it also did not decrement the counter, so when the last fprobe
is removed, the counter is still one. This leaves the fprobes
callback still registered with ftrace and it being called by the
functions defined by the fprobes ops hash. Worse yet, because all
the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions.
Thus, this puts the state of the system where every function is
calling the fprobe callback handler (which does nothing as there
are no registered fprobes), but this causes a good 13% slow down of
the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which
added another layer of preempt disable. As the preempt_count gets
traced in the event, it needs to subtract the amount of preempt
disabling the tracer does to record what the preempt_count was when
the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that
is set by the return of the next() function. The start() function
allocates it and the stop() function frees it. But when the last
item is found, the next() returns NULL which leaks the data that
was allocated in start(). The m->private is used for something
else, so have next() free the data when it returns NULL, as stop()
will then just receive NULL in that case"
* tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak when reading set_event file
ftrace: Correct preemption accounting for function tracing.
selftests/ftrace: Update fprobe test to check enabled_functions file
fprobe: Fix accounting of when to unregister from function graph
fprobe: Always unregister fgraph function from ops
ftrace: Do not add duplicate entries in subops manager ops
ftrace: Fix accounting of adding subops to a manager ops
The cmma_test_essa() inline assembly uses tmp as input and output, however
tmp is specified as output only, which allows the compiler to optimize the
initialization of tmp away.
Therefore the ESSA detection may or may not work depending on previous
contents of the register that the compiler selected for tmp.
Fix this by using the correct constraint modifier.
Fixes: 468a3bc2b7b9 ("s390/cmma: move parsing of cmma kernel parameter to early boot code")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The jcore-aic irqchip does not have separate interrupt numbers reserved for
cpu-local vs global interrupts. Therefore the device drivers need to
request the given interrupt as per CPU interrupt.
69a9dcbd2d65 ("clocksource/drivers/jcore: Use request_percpu_irq()")
converted the clocksource driver over to request_percpu_irq(), but failed
to do add all the required changes, resulting in a failure to register PIT
interrupts.
Fix this by:
1) Explicitly mark the interrupt via irq_set_percpu_devid() in
jcore_pit_init().
2) Enable and disable the per CPU interrupt in the CPU hotplug callbacks.
3) Pass the correct per-cpu cookie to the irq handler by using
handle_percpu_devid_irq() instead of handle_percpu_irq() in
handle_jcore_irq().
[ tglx: Massage change log ]
Fixes: 69a9dcbd2d65 ("clocksource/drivers/jcore: Use request_percpu_irq()")
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/all/20250216175545.35079-3-contact@artur-rojek.eu