tjh.dev
commits
Pull more tracing updates from Steven Rostedt:
- Rename the staging files to give them some meaning. Just
stage1,stag2,etc, does not show what they are for
- Check for NULL from allocation in bootconfig
- Hold event mutex for dyn_event call in user events
- Mark user events to broken (to work on the API)
- Remove eBPF updates from user events
- Remove user events from uapi header to keep it from being installed.
- Move ftrace_graph_is_dead() into inline as it is called from hot
paths and also convert it into a static branch.
* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Move user_events.h temporarily out of include/uapi
ftrace: Make ftrace_graph_is_dead() a static branch
tracing: Set user_events to BROKEN
tracing/user_events: Remove eBPF interfaces
tracing/user_events: Hold event_mutex during dyn_event_add
proc: bootconfig: Add null pointer check
tracing: Rename the staging files for trace_events
Pull clk fix from Stephen Boyd:
"A single revert to fix a boot regression seen when clk_put() started
dropping rate range requests. It's best to keep various systems
booting so we'll kick this out and try again next time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Revert "clk: Drop the rate range on clk_put()"
While user_events API is under development and has been marked for broken
to not let the API become fixed, move the header file out of the uapi
directory. This is to prevent it from being installed, then later changed,
and then have an old distro user space update with a new kernel, where
applications see the user_events being available, but the old header is in
place, and then they get compiled incorrectly.
Also, surround the include with CONFIG_COMPILE_TEST to the current
location, but when the BROKEN tag is taken off, it will use the uapi
directory, and fail to compile. This is a good way to remind us to move
the header back.
Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home
Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com
Link: https://lkml.kernel.org/r/20220401143903.188384f3@gandalf.local.home
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
This reverts commit 7dabfa2bc4803eed83d6f22bd6f045495f40636b. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com
Cc: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
ftrace_graph_is_dead() is used on hot paths, it just reads a variable
in memory and is not worth suffering function call constraints.
For instance, at entry of prepare_ftrace_return(), inlining it avoids
saving prepare_ftrace_return() parameters to stack and restoring them
after calling ftrace_graph_is_dead().
While at it using a static branch is even more performant and is
rather well adapted considering that the returned value will almost
never change.
Inline ftrace_graph_is_dead() and replace 'kill_ftrace_graph' bool
by a static branch.
The performance improvement is noticeable.
Link: https://lkml.kernel.org/r/e0411a6a0ed3eafff0ad2bc9cd4b0e202b4617df.1648623570.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull RT signal fix from Thomas Gleixner:
"Revert the RT related signal changes. They need to be reworked and
generalized"
* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
Use the offset calculation to do the size calculation which avoids yet
another series of CPUID instructions for each invocation.
[ Fix the FP/SSE only case which missed to take the xstate
header into account, as
Reported-by: kernel test robot <oliver.sang@intel.com> ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/87o81pgbp2.ffs@tglx
* clk-sifive:
clk: sifive: Move all stuff into SoCs header files from C files
clk: sifive: Add SoCs prefix in each SoCs-dependent data
riscv: dts: Change the macro name of prci in each device node
dt-bindings: change the macro name of prci in header files and example
clk: sifive: duplicate the macro definitions for the time being
* clk-visconti:
clk: visconti: prevent array overflow in visconti_clk_register_gates()
After being merged, user_events become more visible to a wider audience
that have concerns with the current API. It is too late to fix this for
this release, but instead of a full revert, just mark it as BROKEN (which
prevents it from being selected in make config). Then we can work finding
a better API. If that fails, then it will need to be completely reverted.
Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/
Link: https://lkml.kernel.org/r/20220330155835.5e1f6669@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull more dma-mapping updates from Christoph Hellwig:
- fix a regression in dma remap handling vs AMD memory encryption (me)
- finally kill off the legacy PCI DMA API (Christophe JAILLET)
* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: move pgprot_decrypted out of dma_pgprot
PCI/doc: cleanup references to the legacy PCI DMA API
PCI: Remove the deprecated "pci-dma-compat.h" API
Revert commit bf9ad37dc8a. It needs to be better encapsulated and
generalized.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
The size calculation in __xstate_request_perm() fails to take supervisor
states into account because the permission bitmap is only relevant for user
states.
Up to 5.17 this does not matter because there are no supervisor states
supported, but the (re-)enabling of ENQCMD makes them available.
Fixes: 7c1ef59145f1 ("x86/cpufeatures: Re-enable ENQCMD")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.681768598@linutronix.de
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range
- Support for NCO blocks on Apple SoCs
* clk-range:
clk: Drop the rate range on clk_put()
clk: test: Test clk_set_rate_range on orphan mux
clk: Initialize orphan req_rate
clk: bcm: rpi: Run some clocks at the minimum rate allowed
clk: bcm: rpi: Set a default minimum rate
clk: bcm: rpi: Add variant structure
clk: Add clk_drop_range
clk: Always set the rate on clk_set_range_rate
clk: Use clamp instead of open-coding our own
clk: Always clamp the rounded rate
clk: Enforce that disjoints limits are invalid
clk: Introduce Kunit Tests for the framework
clk: Fix clk_hw_get_clk() when dev is NULL
* clk-uniphier:
clk: uniphier: Fix fixed-rate initialization
* clk-apple:
clk: clk-apple-nco: Allow and fix module building
MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE
clk: clk-apple-nco: Add driver for Apple NCO
dt-bindings: clock: Add Apple NCO
* clk-qcom: (61 commits)
clk: qcom: gcc-msm8994: Fix gpll4 width
dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
clk: qcom: Add display clock controller driver for SM6125
dt-bindings: clock: add QCOM SM6125 display clock bindings
clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig
clk: qcom: gcc: Add emac GDSC support for SM8150
clk: qcom: gcc: sm8150: Fix some identation issues
clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150
clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150
clk: qcom: clk-rcg2: Update the frac table for pixel clock
clk: qcom: clk-rcg2: Update logic to calculate D value for RCG
clk: qcom: smd: Add missing MSM8998 RPM clocks
clk: qcom: smd: Add missing RPM clocks for msm8992/4
dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks
clk: qcom: gcc-ipq806x: add CryptoEngine resets
dt-bindings: reset: add ipq8064 ce5 resets
clk: qcom: gcc-ipq806x: add CryptoEngine clocks
dt-bindings: clock: add ipq8064 ce5 clk define
clk: qcom: gcc-ipq806x: add additional freq for sdc table
clk: qcom: clk-rcg: add clk_rcg_floor_ops ops
...
Improve PRCI driver to reduce the complexity, we remove the SoCs C files
by putting all stuff in each SoCs header files, and include these
SoCs-specific header files in core of PRCI. It can also avoid the W=1
kernel build warnings about variable defined but not used
[-Wunused-const-variable=], like commit 487dc7bb6a0c ("clk: sifive:
fu540-prci: Declare static const variable 'prci_clk_fu540' where it's
used") does.
Signed-off-by: Zong Li <zong.li@sifive.com>
Suggested-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/a3c7ec5c46c1d8be455d1c347db4855bb56cec53.1646388139.git.zong.li@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This code was using -1 to represent that there was no reset function.
Unfortunately, the -1 was stored in u8 so the if (clks[i].rs_id >= 0)
condition was always true. This lead to an out of bounds access in
visconti_clk_register_gates().
Fixes: b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220316083533.GA30941@kili
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Remove eBPF interfaces within user_events to ensure they are fully
reviewed.
Link: https://lore.kernel.org/all/20220329165718.GA10381@kbox/
Link: https://lkml.kernel.org/r/20220329173051.10087-1-beaub@linux.microsoft.com
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull ARM fixes from Russell King:
- avoid unnecessary rebuilds for library objects
- fix return value of __setup handlers
- fix invalid input check for "crashkernel=" kernel option
- silence KASAN warnings in unwind_frame
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()
ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0'
ARM: 9187/1: JIVE: fix return value of __setup handler
ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
pgprot_decrypted is used by AMD SME systems to allow access to memory
that was set to not encrypted using set_memory_decrypted. That only
happens for dma-direct memory as the IOMMU solves the addressing
challenges for the encryption bit using its own remapping.
Move the pgprot_decrypted call out of dma_pgprot which is also used
by the IOMMU mappings and into dma-direct so that it is only used with
memory that was set decrypted.
Fixes: f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP")
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Whenever a buddy page is found, page_is_buddy() should be called to
check its validity. Add the missing check during pageblock merge check.
Fixes: 1dd214b8f21c ("mm: page_alloc: avoid merging non-fallbackable pageblocks with others")
Link: https://lore.kernel.org/all/20220330154208.71aca532@gandalf.local.home/
Reported-and-tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So far the cached fixed compacted offsets worked, but with (re-)enabling
of ENQCMD this does no longer work with KVM fpstate.
KVM does not have supervisor features enabled for the guest FPU, which
means that KVM has then a different XSAVE area layout than the host FPU
state. This in turn breaks the copy from/to UABI functions when invoked for
a guest state.
Remove the pre-calculated compacted offsets and calculate the offset
of each component at runtime based on the XCOMP_BV field in the XSAVE
header.
The runtime overhead is not interesting because these copy from/to UABI
functions are not used in critical fast paths. KVM uses them to save and
restore FPU state during migration. The host uses them for ptrace and for
the slow path of 32bit signal handling.
Fixes: 7c1ef59145f1 ("x86/cpufeatures: Re-enable ENQCMD")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.627636809@linutronix.de
- Audio clks on StarFive JH7100 RISC-V SoC
- Terminate arrays with sentinels and make that clearer
- Cleanup SPDX tags
- Fix typos in comments
* clk-starfive:
clk: starfive: Add JH7100 audio clock driver
clk: starfive: jh7100: Support more clock types
clk: starfive: jh7100: Make hw clock implementation reusable
dt-bindings: clock: Add starfive,jh7100-audclk bindings
dt-bindings: clock: Add JH7100 audio clock definitions
clk: starfive: jh7100: Handle audio_div clock properly
clk: starfive: jh7100: Don't round divisor up twice
* clk-ti:
clk: ti: Drop legacy compatibility clocks for dra7
clk: ti: Drop legacy compatibility clocks for am4
clk: ti: Drop legacy compatibility clocks for am3
clk: ti: Update component clocks to use ti_dt_clk_name()
clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name()
clk: ti: Add ti_dt_clk_name() helper to use clock-output-names
clk: ti: Use clock-output-names for clkctrl
clk: ti: Add ti_find_clock_provider() to use clock-output-names
clk: ti: Optionally parse IO address from parent clock node
clk: ti: Preserve node in ti_dt_clocks_register()
clk: ti: Constify clkctrl_name
* clk-terminate:
clk: actions: Make sentinel elements more obvious
clk: clps711x: Terminate clk_div_table with sentinel element
clk: hisilicon: Terminate clk_div_table with sentinel element
clk: loongson1: Terminate clk_div_table with sentinel element
clk: actions: Terminate clk_div_table with sentinel element
* clk-cleanup:
clk: zynq: Update the parameters to zynq_clk_register_periph_clk
clk: zynq: trivial warning fix
clk: qcom: sm6125-gcc: fix typos in comments
clk: ti: clkctrl: fix typos in comments
clk: COMMON_CLK_LAN966X should depend on SOC_LAN966
clk: Use of_device_get_match_data()
clk: bcm2835: Remove unused variable
clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
clk: cleanup comments
clk: socfpga: cleanup spdx tags
When clk_put() is called we don't make another clk_set_rate() call to
re-evaluate the rate boundaries. This is unlike clk_set_rate_range()
that evaluates the rate again each time it is called.
However, clk_put() is essentially equivalent to clk_set_rate_range()
since after clk_put() completes the consumer's boundaries shouldn't be
enforced anymore.
Let's add a call to clk_set_rate_range() in clk_put() to make sure those
rate boundaries are dropped and the clock provider drivers can react.
Also add a few tests to make sure this case is covered.
Fixes: c80ac50cbb37 ("clk: Always set the rate on clk_set_range_rate")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220325161144.1901695-4-maxime@cerno.tech
[sboyd@kernel.org: Reword commit text]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fixed-rate clocks in UniPhier don't have any parent clocks, however,
initial data "init.flags" isn't initialized, so it might be determined
that there is a parent clock for fixed-rate clock.
This sets init.flags to zero as initialization.
Cc: <stable@vger.kernel.org>
Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1646808918-30899-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220312135722.20770-1-povik+lin@cutebit.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The gpll4 postdiv is actually a div4, so make sure that Linux is aware of
this.
This fixes the following error messages:
mmc1: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz
mmc1: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz
Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220319174940.341137-1-konrad.dybcio@somainline.org
Tested-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This patch is prerequisite for moving SoCs C files into SoCs header
files. Currently, fu540-prci.c and fu740-prci.c use same names for
several macro definitions and variables, it would cause redefinition
error when we trying to include all stuff in sifive-prci.c. In this
patch, we also remove the temporary macro definitions which are
added by previous patch.
Signed-off-by: Zong Li <zong.li@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/7728ef662c59449ce954b1b62c6ad5241e07adfb.1646388139.git.zong.li@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Make sure the event_mutex is properly held during dyn_event_add call.
This is required when adding dynamic events.
Link: https://lkml.kernel.org/r/20220328223225.1992-1-beaub@linux.microsoft.com
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Avoid SEGV if core.cpus isn't set in 'perf stat'.
- Stop depending on .git files for building PERF-VERSION-FILE, used in
'perf --version', fixing some perf tools build scenarios.
- Convert tracepoint.py example to python3.
- Update UAPI header copies from the kernel sources: socket,
mman-common, msr-index, KVM, i915 and cpufeatures.
- Update copy of libbpf's hashmap.c.
- Directly return instead of using local ret variable in
evlist__create_syswide_maps(), found by coccinelle.
* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf python: Convert tracepoint.py example to python3
perf evlist: Directly return instead of using local ret variable
perf cpumap: More cpu map reuse by merge.
perf cpumap: Add is_subset function
perf evlist: Rename cpus to user_requested_cpus
perf tools: Stop depending on .git files for building PERF-VERSION-FILE
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools kvm headers arm64: Update KVM headers from the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf beauty: Update copy of linux/socket.h with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
perf stat: Avoid SEGV if core.cpus isn't set
Mention the regular DMA API calls instead of the now removed PCI DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Pull more parisc architecture updates from Helge Deller:
- Revert a patch to the invalidate/flush vmap routines which broke
kernel patching functions on older PA-RISC machines.
- Fix the kernel patching code wrt locking and flushing. Works now on
B160L machine as well.
- Fix CPU IRQ affinity for LASI, WAX and Dino chips
- Add CPU hotplug support
- Detect the hppa-suse-linux-gcc compiler when cross-compiling
* tag 'for-5.18/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix patch code locking and flushing
parisc: Find a new timesync master if current CPU is removed
parisc: Move common_stext into .text section when CONFIG_HOTPLUG_CPU=y
parisc: Rewrite arch_cpu_idle_dead() for CPU hotplugging
parisc: Implement __cpu_die() and __cpu_disable() for CPU hotplugging
parisc: Add PDC locking functions for rendezvous code
parisc: Move disable_sr_hashing_asm() into .text section
parisc: Move CPU startup-related functions into .text section
parisc: Move store_cpu_topology() into text section
parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGY
parisc: Ensure set_firmware_width() is called only once
parisc: Add constants for control registers and clean up mfctl()
parisc: Detect hppa-suse-linux-gcc compiler for cross-building
parisc: Clean up cpu_check_affinity() and drop cpu_set_affinity_irq()
parisc: Fix CPU affinity for Lasi, WAX and Dino chips
Revert "parisc: Fix invalidate/flush vmap routines"
In preparation for runtime calculation of XSAVE offsets cache the feature
flags for each XSTATE component during feature enumeration via CPUID(0xD).
EDX has two relevant bits:
0 Supervisor component
1 Feature storage must be 64 byte aligned
These bits are currently only evaluated during init, but the alignment bit
must be cached to make runtime calculation of XSAVE offsets efficient.
Cache the full EDX content and use it for the existing alignment and
supervisor checks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.573656209@linutronix.de
- Mark mux table as const in clk-mux
- Make the all_lists array const
* clk-mvebu:
clk: mvebu: use time_is_before_eq_jiffies() instead of open coding it
* clk-const:
clk: Mark clk_core_evict_parent_cache_subtree() 'target' const
clk: Mark 'all_lists' as const
clk: pistachio: Declare mux table as const u32[]
clk: qcom: Declare mux table as const u32[]
clk: mmp: Declare mux tables as const u32[]
clk: hisilicon: Remove unnecessary cast of mux table to u32 *
clk: mux: Declare u32 *table parameter as const
clk: nxp: Declare mux table parameter as const u32 *
clk: nxp: Remove unused variable
* clk-imx: (28 commits)
dt-bindings: clock: drop useless consumer example
clk: imx: Select MXC_CLK for i.MX93 clock driver
clk: imx: remove redundant re-assignment of pll->base
MAINTAINERS: clk: imx: add git tree and dt-bindings files
clk: imx: pll14xx: Support dynamic rates
clk: imx: pll14xx: Add pr_fmt
clk: imx: pll14xx: explicitly return lowest rate
clk: imx: pll14xx: name variables after usage
clk: imx: pll14xx: consolidate rate calculation
clk: imx: pll14xx: Use FIELD_GET/FIELD_PREP
clk: imx: pll14xx: Drop wrong shifting
clk: imx: pll14xx: Use register defines consistently
clk: imx8mp: remove SYS PLL 1/2 clock gates
clk: imx8mn: remove SYS PLL 1/2 clock gates
clk: imx8mm: remove SYS PLL 1/2 clock gates
clk: imx: add i.MX93 clk
clk: imx: support fracn gppll
clk: imx: add i.MX93 composite clk
dt-bindings: clock: add i.MX93 clock definition
dt-bindings: clock: Add imx93 clock support
...
* clk-rockchip:
clk: rockchip: re-add rational best approximation algorithm to the fractional divider
clk/rockchip: Use of_device_get_match_data()
clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568
clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568
clk: rockchip: Add more PLL rates for rk3568
Add a driver for the audio clocks on the Starfive JH7100 RISC-V SoC.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220126173953.1016706-8-kernel@esmil.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We no longer have users for the compatibility clocks and we can drop them.
These are old duplicate clocks for what we using.
Depends-on: 31aa7056bbec ("ARM: dts: Don't use legacy clock defines for dra7 clkctrl")
Depends-on: 9206a3af4fc0 ("clk: ti: Move dra7 clock devices out of the legacy section")
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220203085618.16043-4-tony@atomide.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The sentinel elements of various tables in drivers/clk/actions can be a
bit hard to recognize. Make them easier to see by changing the style
from { 0, 0 } to { /* sentinel */ }.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220218000922.134857-6-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In case there are only one gate or the two_gate is 0 the clk1 clock
passed is not used. We are passing 0 which is arm_pll.
Pass a invalid clock instead.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220222130903.17235-3-shubhrajyoti.datta@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
A bug recently affected the Tegra30 where calling clk_set_rate_range()
on a clock would make it change its rate to the minimum.
This was due to the clock in question being a mux that was orphan at
registration, which lead to the clk_core req_rate being 0, and the
clk_set_rate_range() function then calling clk_set_rate() with req_rate,
effectively making that clock running at the minimum rate allowed, even
though the initial rate was within that range.
Make a test suite to create a mux initially orphan, and then make sure
that if our clock rate was initially within a given range, then
enforcing that range won't affect it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220325161144.1901695-3-maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220208183411.61090-4-povik+lin@cutebit.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
qcom,gcc-other Documentation lacks a '|' for the description. This cause
dt_binding_check to incorrectly parse "See also:" as a new value.
Add the missing '|' to correctly parse the description.
Fixes: a03965ed1310 ("dt-bindings: clock: split qcom,gcc.yaml to common and specific schema")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20220323194248.26970-1-ansuelsmth@gmail.com
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We currently change the macro name for fu540 and fu740 by adding the
prefix respectively, these marcos are referenced by some device nodes,
they should be modified as well.
Signed-off-by: Zong Li <zong.li@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/db92d209fa700f7da8bc8028083476fcc138d80e.1646388139.git.zong.li@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Fix printing 'phys_addr' in 'perf script'.
- Fix failure to add events with 'perf probe' in ppc64 due to not
removing leading dot (ppc64 ABIv1).
- Fix cpu_map__item() python binding building.
- Support event alias in form foo-bar-baz, add pmu-events and
parse-event tests for it.
- No need to setup affinities when starting a workload or attaching to
a pid.
- Use path__join() to compose a path instead of ad-hoc snprintf()
equivalent.
- Override attr->sample_period for non-libpfm4 events.
- Use libperf cpumap APIs instead of accessing the internal state
directly.
- Sync x86 arch prctl headers and files changed by the new
set_mempolicy_home_node syscall with the kernel sources.
- Remove duplicate include in cpumap.h.
- Remove redundant err variable.
* tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Remove redundant err variable
perf test: Add parse-events test for aliases with hyphens
perf test: Add pmu-events test for aliases with hyphens
perf parse-events: Support event alias in form foo-bar-baz
perf evsel: Override attr->sample_period for non-libpfm4 events
perf cpumap: Remove duplicate include in cpumap.h
perf cpumap: Migrate to libperf cpumap api
perf python: Fix cpu_map__item() building
perf script: Fix printing 'phys_addr' failure issue
tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall
tools headers UAPI: Sync x86 arch prctl headers with the kernel sources
perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename)
perf evlist: No need to setup affinities when disabling events for pid targets
perf evlist: No need to setup affinities when enabling events for pid targets
perf stat: No need to setup affinities when starting a workload
perf affinity: Allow passing a NULL arg to affinity__cleanup()
perf probe: Fix ppc64 'perf probe add events failed' case
kzalloc is a memory allocation function which can return NULL when some
internal memory errors happen. It is safer to add null pointer check.
Link: https://lkml.kernel.org/r/20220329104004.2376879-1-lv.ruyi@zte.com.cn
Cc: stable@vger.kernel.org
Fixes: c1a3c36017d4 ("proc: bootconfig: Add /proc/bootconfig to show boot config list")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull Kbuild fixes from Masahiro Yamada:
- Fix empty $(PYTHON) expansion.
- Fix UML, which got broken by the attempt to suppress Clang warnings.
- Fix warning message in modpost.
* tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: restore the warning message for missing symbol versions
Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS"
kbuild: Remove '-mno-global-merge'
kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh
kconfig: remove stale comment about removed kconfig_print_symbol()
Convert the tracepoint.py file to python3 as many of the files in
tools/perf are already written in python3.
Committer testing:
# export PYTHONPATH=/tmp/build/perf/python/
# python3 ~acme/git/perf/tools/perf/python/tracepoint.py | head
time 67394457376909 prev_comm=swapper/12 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=gnome-terminal- next_pid=3313 next_prio=120
time 67394457807669 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457811859 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457824929 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457831899 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457842299 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457844179 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457853879 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457856339 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457865659 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
Traceback (most recent call last):
File "/var/home/acme/git/perf/tools/perf/python/tracepoint.py", line 48, in <module>
main()
File "/var/home/acme/git/perf/tools/perf/python/tracepoint.py", line 37, in main
print("time %u prev_comm=%s prev_pid=%d prev_prio=%d prev_state=0x%x ==> next_comm=%s next_pid=%d next_prio=%d" % (
BrokenPipeError: [Errno 32] Broken pipe
#
Signed-off-by: Tanu M <tanu235m@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/linux-perf-users/CAPS78prawYzRZnyhWjgOnGw4EwoswNwztvfZFdCOPOydFzVwzQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following KASAN warning is detected by QEMU.
==================================================================
BUG: KASAN: stack-out-of-bounds in unwind_frame+0x508/0x870
Read of size 4 at addr c36bba90 by task cat/163
CPU: 1 PID: 163 Comm: cat Not tainted 5.10.0-rc1 #40
Hardware name: ARM-Versatile Express
[<c0113fac>] (unwind_backtrace) from [<c010e71c>] (show_stack+0x10/0x14)
[<c010e71c>] (show_stack) from [<c0b805b4>] (dump_stack+0x98/0xb0)
[<c0b805b4>] (dump_stack) from [<c0b7d658>] (print_address_description.constprop.0+0x58/0x4bc)
[<c0b7d658>] (print_address_description.constprop.0) from [<c031435c>] (kasan_report+0x154/0x170)
[<c031435c>] (kasan_report) from [<c0113c44>] (unwind_frame+0x508/0x870)
[<c0113c44>] (unwind_frame) from [<c010e298>] (__save_stack_trace+0x110/0x134)
[<c010e298>] (__save_stack_trace) from [<c01ce0d8>] (stack_trace_save+0x8c/0xb4)
[<c01ce0d8>] (stack_trace_save) from [<c0313520>] (kasan_set_track+0x38/0x60)
[<c0313520>] (kasan_set_track) from [<c0314cb8>] (kasan_set_free_info+0x20/0x2c)
[<c0314cb8>] (kasan_set_free_info) from [<c0313474>] (__kasan_slab_free+0xec/0x120)
[<c0313474>] (__kasan_slab_free) from [<c0311e20>] (kmem_cache_free+0x7c/0x334)
[<c0311e20>] (kmem_cache_free) from [<c01c35dc>] (rcu_core+0x390/0xccc)
[<c01c35dc>] (rcu_core) from [<c01013a8>] (__do_softirq+0x180/0x518)
[<c01013a8>] (__do_softirq) from [<c0135214>] (irq_exit+0x9c/0xe0)
[<c0135214>] (irq_exit) from [<c01a40e4>] (__handle_domain_irq+0xb0/0x110)
[<c01a40e4>] (__handle_domain_irq) from [<c0691248>] (gic_handle_irq+0xa0/0xb8)
[<c0691248>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x94)
Exception stack(0xc36bb928 to 0xc36bb970)
b920: c36bb9c0 00000000 c0126919 c0101228 c36bb9c0 b76d7730
b940: c36b8000 c36bb9a0 c3335b00 c01ce0d8 00000003 c36bba3c c36bb940 c36bb978
b960: c010e298 c011373c 60000013 ffffffff
[<c0100b0c>] (__irq_svc) from [<c011373c>] (unwind_frame+0x0/0x870)
[<c011373c>] (unwind_frame) from [<00000000>] (0x0)
The buggy address belongs to the page:
page:(ptrval) refcount:0 mapcount:0 mapping:00000000 index:0x0 pfn:0x636bb
flags: 0x0()
raw: 00000000 00000000 ef867764 00000000 00000000 00000000 ffffffff 00000000
page dumped because: kasan: bad access detected
addr c36bba90 is located in stack of task cat/163 at offset 48 in frame:
stack_trace_save+0x0/0xb4
this frame has 1 object:
[32, 48) 'trace'
Memory state around the buggy address:
c36bb980: f1 f1 f1 f1 00 04 f2 f2 00 00 f3 f3 00 00 00 00
c36bba00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
>c36bba80: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
^
c36bbb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c36bbb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
There is a same issue on x86 and has been resolved by the commit f7d27c35ddff
("x86/mm, kasan: Silence KASAN warnings in get_wchan()").
The solution could be applied to arm architecture too.
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Reported-by: He Ying <heying24@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Since commit 251cc826be7d ("ARM: 9154/1: decompressor: do not copy source
files while building"), the following three are rebuilt every time.
AS arch/arm/boot/compressed/lib1funcs.o
AS arch/arm/boot/compressed/ashldi3.o
AS arch/arm/boot/compressed/bswapsdi2.o
Move the "OBJS += ..." line up so these objects are added to 'targets'.
Fixes: 251cc826be7d ("ARM: 9154/1: decompressor: do not copy source files while building")
Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Now that all usages of the functions defined in "pci-dma-compat.h" have
been removed, it is time to remove this file as well.
In order not to break builds, move the "#include <linux/dma-mapping.h>"
that was in "pci-dma-compat.h" into "include/linux/pci.h"
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pull module update from Luis Chamberlain:
"There is only one patch which qualifies for modules for v5.18-rc1 and
its a small fix from Dan Carpenter for lib/test_kmod module.
The rest of the changes are too major and landed in modules-testing
too late for inclusion. The good news is that most of the major
changes for v5.19 is going to be tested very early through linux-next.
This simple fix is all we have for modules for v5.18-rc1"
* tag 'modules-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
lib/test: use after free in register_test_dev_kmod()
This change fixes the following:
1) The flags variable is not initialized. Always use raw_spin_lock_irqsave
and raw_spin_unlock_irqrestore to serialize patching.
2) flush_kernel_vmap_range is primarily intended for DMA flushes. Since
__patch_text_multiple is often called with interrupts disabled, it is
better to directly call flush_kernel_dcache_range_asm and
flush_kernel_icache_range_asm. This avoids an extra call.
3) The final call to flush_icache_range is unnecessary.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Reading XSTATE feature information from CPUID over and over does not make
sense. The information has to be cached anyway, so it can be done early.
Prepare for runtime calculation of XSTATE offsets and allow
consolidation of the size calculation functions in a later step.
Rename the function while at it as it does not setup any features.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.519411939@linutronix.de
- Kunit tests for clk-gate implementation
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add
support for dynamic mode
* clk-xilinx:
clk: zynqmp: replace warn_once with pr_debug for failed clock ops
* clk-kunit:
clk: gate: Add some kunit test suites
* clk-cs2000:
clk: cs2000-cp: convert driver to regmap
clk: cs2000-cp: freeze config during register fiddling
clk: cs2000-cp: make clock skip setting configurable
clk: cs2000-cp: add support for dynamic mode
clk: cs2000-cp: Make aux output function controllable
dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode
dt-bindings: clock: cs2000-cp: document cirrus,clock-skip flag
dt-bindings: clock: cs2000-cp: document aux-output-source
dt-bindings: clock: convert cs2000-cp bindings to yaml
* clk-renesas:
dt-bindings: clock: renesas: Make example 'clocks' parsable
clk: rs9: Add Renesas 9-series PCIe clock generator driver
clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
clk: renesas: r8a779f0: Add PFC clock
clk: renesas: r8a779f0: Add I2C clocks
clk: renesas: r8a779f0: Add WDT clock
clk: renesas: r8a779f0: Fix RSW2 clock divider
clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC
dt-bindings: clock: renesas: Document RZ/V2L SoC
dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions
clk: renesas: r8a779a0: Add CANFD module clock
clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3
clk: renesas: r8a7799[05]: Add MLP clocks
clk: renesas: r8a779f0: Add SYS-DMAC clocks
Use the helper function time_is_{before,after}_jiffies() to improve
code readability.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1644890154-64915-3-git-send-email-wangqing@vivo.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Clarify that the 'target' clk isn't being modified, instead it's being
searched for. Mark it const so the function can't modify it.
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220217220554.2711696-3-sboyd@kernel.org
Consumer examples in the bindings of resource providers are trivial,
useless and duplication of code. Remove the example code for consumer
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220316130858.93455-2-krzysztof.kozlowski@canonical.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull Rockchip clk driver updates from Heiko Stuebner:
- Improve the clocks for the rk3568 display outputs (parenting, pll-rates)
- Use of_device_get_match_data() instead of open-coding on rk3568
- Reintroduce the expected fractional-divider behaviour that disappeared
with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
* tag 'v5.18-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: re-add rational best approximation algorithm to the fractional divider
clk/rockchip: Use of_device_get_match_data()
clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568
clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568
clk: rockchip: Add more PLL rates for rk3568
Unlike the system clocks there are audio clocks that combine both
multiplexer/divider and gate/multiplexer/divider, so add support for
that.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220126173953.1016706-7-kernel@esmil.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull more tracing updates from Steven Rostedt:
- Rename the staging files to give them some meaning. Just
stage1,stag2,etc, does not show what they are for
- Check for NULL from allocation in bootconfig
- Hold event mutex for dyn_event call in user events
- Mark user events to broken (to work on the API)
- Remove eBPF updates from user events
- Remove user events from uapi header to keep it from being installed.
- Move ftrace_graph_is_dead() into inline as it is called from hot
paths and also convert it into a static branch.
* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Move user_events.h temporarily out of include/uapi
ftrace: Make ftrace_graph_is_dead() a static branch
tracing: Set user_events to BROKEN
tracing/user_events: Remove eBPF interfaces
tracing/user_events: Hold event_mutex during dyn_event_add
proc: bootconfig: Add null pointer check
tracing: Rename the staging files for trace_events
Pull clk fix from Stephen Boyd:
"A single revert to fix a boot regression seen when clk_put() started
dropping rate range requests. It's best to keep various systems
booting so we'll kick this out and try again next time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Revert "clk: Drop the rate range on clk_put()"
While user_events API is under development and has been marked for broken
to not let the API become fixed, move the header file out of the uapi
directory. This is to prevent it from being installed, then later changed,
and then have an old distro user space update with a new kernel, where
applications see the user_events being available, but the old header is in
place, and then they get compiled incorrectly.
Also, surround the include with CONFIG_COMPILE_TEST to the current
location, but when the BROKEN tag is taken off, it will use the uapi
directory, and fail to compile. This is a good way to remind us to move
the header back.
Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home
Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com
Link: https://lkml.kernel.org/r/20220401143903.188384f3@gandalf.local.home
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
This reverts commit 7dabfa2bc4803eed83d6f22bd6f045495f40636b. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com
Cc: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
ftrace_graph_is_dead() is used on hot paths, it just reads a variable
in memory and is not worth suffering function call constraints.
For instance, at entry of prepare_ftrace_return(), inlining it avoids
saving prepare_ftrace_return() parameters to stack and restoring them
after calling ftrace_graph_is_dead().
While at it using a static branch is even more performant and is
rather well adapted considering that the returned value will almost
never change.
Inline ftrace_graph_is_dead() and replace 'kill_ftrace_graph' bool
by a static branch.
The performance improvement is noticeable.
Link: https://lkml.kernel.org/r/e0411a6a0ed3eafff0ad2bc9cd4b0e202b4617df.1648623570.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Use the offset calculation to do the size calculation which avoids yet
another series of CPUID instructions for each invocation.
[ Fix the FP/SSE only case which missed to take the xstate
header into account, as
Reported-by: kernel test robot <oliver.sang@intel.com> ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/87o81pgbp2.ffs@tglx
* clk-sifive:
clk: sifive: Move all stuff into SoCs header files from C files
clk: sifive: Add SoCs prefix in each SoCs-dependent data
riscv: dts: Change the macro name of prci in each device node
dt-bindings: change the macro name of prci in header files and example
clk: sifive: duplicate the macro definitions for the time being
* clk-visconti:
clk: visconti: prevent array overflow in visconti_clk_register_gates()
After being merged, user_events become more visible to a wider audience
that have concerns with the current API. It is too late to fix this for
this release, but instead of a full revert, just mark it as BROKEN (which
prevents it from being selected in make config). Then we can work finding
a better API. If that fails, then it will need to be completely reverted.
Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/
Link: https://lkml.kernel.org/r/20220330155835.5e1f6669@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull more dma-mapping updates from Christoph Hellwig:
- fix a regression in dma remap handling vs AMD memory encryption (me)
- finally kill off the legacy PCI DMA API (Christophe JAILLET)
* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: move pgprot_decrypted out of dma_pgprot
PCI/doc: cleanup references to the legacy PCI DMA API
PCI: Remove the deprecated "pci-dma-compat.h" API
The size calculation in __xstate_request_perm() fails to take supervisor
states into account because the permission bitmap is only relevant for user
states.
Up to 5.17 this does not matter because there are no supervisor states
supported, but the (re-)enabling of ENQCMD makes them available.
Fixes: 7c1ef59145f1 ("x86/cpufeatures: Re-enable ENQCMD")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.681768598@linutronix.de
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range
- Support for NCO blocks on Apple SoCs
* clk-range:
clk: Drop the rate range on clk_put()
clk: test: Test clk_set_rate_range on orphan mux
clk: Initialize orphan req_rate
clk: bcm: rpi: Run some clocks at the minimum rate allowed
clk: bcm: rpi: Set a default minimum rate
clk: bcm: rpi: Add variant structure
clk: Add clk_drop_range
clk: Always set the rate on clk_set_range_rate
clk: Use clamp instead of open-coding our own
clk: Always clamp the rounded rate
clk: Enforce that disjoints limits are invalid
clk: Introduce Kunit Tests for the framework
clk: Fix clk_hw_get_clk() when dev is NULL
* clk-uniphier:
clk: uniphier: Fix fixed-rate initialization
* clk-apple:
clk: clk-apple-nco: Allow and fix module building
MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE
clk: clk-apple-nco: Add driver for Apple NCO
dt-bindings: clock: Add Apple NCO
* clk-qcom: (61 commits)
clk: qcom: gcc-msm8994: Fix gpll4 width
dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
clk: qcom: Add display clock controller driver for SM6125
dt-bindings: clock: add QCOM SM6125 display clock bindings
clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig
clk: qcom: gcc: Add emac GDSC support for SM8150
clk: qcom: gcc: sm8150: Fix some identation issues
clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150
clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150
clk: qcom: clk-rcg2: Update the frac table for pixel clock
clk: qcom: clk-rcg2: Update logic to calculate D value for RCG
clk: qcom: smd: Add missing MSM8998 RPM clocks
clk: qcom: smd: Add missing RPM clocks for msm8992/4
dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks
clk: qcom: gcc-ipq806x: add CryptoEngine resets
dt-bindings: reset: add ipq8064 ce5 resets
clk: qcom: gcc-ipq806x: add CryptoEngine clocks
dt-bindings: clock: add ipq8064 ce5 clk define
clk: qcom: gcc-ipq806x: add additional freq for sdc table
clk: qcom: clk-rcg: add clk_rcg_floor_ops ops
...
Improve PRCI driver to reduce the complexity, we remove the SoCs C files
by putting all stuff in each SoCs header files, and include these
SoCs-specific header files in core of PRCI. It can also avoid the W=1
kernel build warnings about variable defined but not used
[-Wunused-const-variable=], like commit 487dc7bb6a0c ("clk: sifive:
fu540-prci: Declare static const variable 'prci_clk_fu540' where it's
used") does.
Signed-off-by: Zong Li <zong.li@sifive.com>
Suggested-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/a3c7ec5c46c1d8be455d1c347db4855bb56cec53.1646388139.git.zong.li@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This code was using -1 to represent that there was no reset function.
Unfortunately, the -1 was stored in u8 so the if (clks[i].rs_id >= 0)
condition was always true. This lead to an out of bounds access in
visconti_clk_register_gates().
Fixes: b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220316083533.GA30941@kili
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Remove eBPF interfaces within user_events to ensure they are fully
reviewed.
Link: https://lore.kernel.org/all/20220329165718.GA10381@kbox/
Link: https://lkml.kernel.org/r/20220329173051.10087-1-beaub@linux.microsoft.com
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull ARM fixes from Russell King:
- avoid unnecessary rebuilds for library objects
- fix return value of __setup handlers
- fix invalid input check for "crashkernel=" kernel option
- silence KASAN warnings in unwind_frame
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()
ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0'
ARM: 9187/1: JIVE: fix return value of __setup handler
ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
pgprot_decrypted is used by AMD SME systems to allow access to memory
that was set to not encrypted using set_memory_decrypted. That only
happens for dma-direct memory as the IOMMU solves the addressing
challenges for the encryption bit using its own remapping.
Move the pgprot_decrypted call out of dma_pgprot which is also used
by the IOMMU mappings and into dma-direct so that it is only used with
memory that was set decrypted.
Fixes: f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP")
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Whenever a buddy page is found, page_is_buddy() should be called to
check its validity. Add the missing check during pageblock merge check.
Fixes: 1dd214b8f21c ("mm: page_alloc: avoid merging non-fallbackable pageblocks with others")
Link: https://lore.kernel.org/all/20220330154208.71aca532@gandalf.local.home/
Reported-and-tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So far the cached fixed compacted offsets worked, but with (re-)enabling
of ENQCMD this does no longer work with KVM fpstate.
KVM does not have supervisor features enabled for the guest FPU, which
means that KVM has then a different XSAVE area layout than the host FPU
state. This in turn breaks the copy from/to UABI functions when invoked for
a guest state.
Remove the pre-calculated compacted offsets and calculate the offset
of each component at runtime based on the XCOMP_BV field in the XSAVE
header.
The runtime overhead is not interesting because these copy from/to UABI
functions are not used in critical fast paths. KVM uses them to save and
restore FPU state during migration. The host uses them for ptrace and for
the slow path of 32bit signal handling.
Fixes: 7c1ef59145f1 ("x86/cpufeatures: Re-enable ENQCMD")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.627636809@linutronix.de
- Audio clks on StarFive JH7100 RISC-V SoC
- Terminate arrays with sentinels and make that clearer
- Cleanup SPDX tags
- Fix typos in comments
* clk-starfive:
clk: starfive: Add JH7100 audio clock driver
clk: starfive: jh7100: Support more clock types
clk: starfive: jh7100: Make hw clock implementation reusable
dt-bindings: clock: Add starfive,jh7100-audclk bindings
dt-bindings: clock: Add JH7100 audio clock definitions
clk: starfive: jh7100: Handle audio_div clock properly
clk: starfive: jh7100: Don't round divisor up twice
* clk-ti:
clk: ti: Drop legacy compatibility clocks for dra7
clk: ti: Drop legacy compatibility clocks for am4
clk: ti: Drop legacy compatibility clocks for am3
clk: ti: Update component clocks to use ti_dt_clk_name()
clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name()
clk: ti: Add ti_dt_clk_name() helper to use clock-output-names
clk: ti: Use clock-output-names for clkctrl
clk: ti: Add ti_find_clock_provider() to use clock-output-names
clk: ti: Optionally parse IO address from parent clock node
clk: ti: Preserve node in ti_dt_clocks_register()
clk: ti: Constify clkctrl_name
* clk-terminate:
clk: actions: Make sentinel elements more obvious
clk: clps711x: Terminate clk_div_table with sentinel element
clk: hisilicon: Terminate clk_div_table with sentinel element
clk: loongson1: Terminate clk_div_table with sentinel element
clk: actions: Terminate clk_div_table with sentinel element
* clk-cleanup:
clk: zynq: Update the parameters to zynq_clk_register_periph_clk
clk: zynq: trivial warning fix
clk: qcom: sm6125-gcc: fix typos in comments
clk: ti: clkctrl: fix typos in comments
clk: COMMON_CLK_LAN966X should depend on SOC_LAN966
clk: Use of_device_get_match_data()
clk: bcm2835: Remove unused variable
clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
clk: cleanup comments
clk: socfpga: cleanup spdx tags
When clk_put() is called we don't make another clk_set_rate() call to
re-evaluate the rate boundaries. This is unlike clk_set_rate_range()
that evaluates the rate again each time it is called.
However, clk_put() is essentially equivalent to clk_set_rate_range()
since after clk_put() completes the consumer's boundaries shouldn't be
enforced anymore.
Let's add a call to clk_set_rate_range() in clk_put() to make sure those
rate boundaries are dropped and the clock provider drivers can react.
Also add a few tests to make sure this case is covered.
Fixes: c80ac50cbb37 ("clk: Always set the rate on clk_set_range_rate")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220325161144.1901695-4-maxime@cerno.tech
[sboyd@kernel.org: Reword commit text]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fixed-rate clocks in UniPhier don't have any parent clocks, however,
initial data "init.flags" isn't initialized, so it might be determined
that there is a parent clock for fixed-rate clock.
This sets init.flags to zero as initialization.
Cc: <stable@vger.kernel.org>
Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1646808918-30899-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The gpll4 postdiv is actually a div4, so make sure that Linux is aware of
this.
This fixes the following error messages:
mmc1: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz
mmc1: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz
Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220319174940.341137-1-konrad.dybcio@somainline.org
Tested-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This patch is prerequisite for moving SoCs C files into SoCs header
files. Currently, fu540-prci.c and fu740-prci.c use same names for
several macro definitions and variables, it would cause redefinition
error when we trying to include all stuff in sifive-prci.c. In this
patch, we also remove the temporary macro definitions which are
added by previous patch.
Signed-off-by: Zong Li <zong.li@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/7728ef662c59449ce954b1b62c6ad5241e07adfb.1646388139.git.zong.li@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Make sure the event_mutex is properly held during dyn_event_add call.
This is required when adding dynamic events.
Link: https://lkml.kernel.org/r/20220328223225.1992-1-beaub@linux.microsoft.com
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Avoid SEGV if core.cpus isn't set in 'perf stat'.
- Stop depending on .git files for building PERF-VERSION-FILE, used in
'perf --version', fixing some perf tools build scenarios.
- Convert tracepoint.py example to python3.
- Update UAPI header copies from the kernel sources: socket,
mman-common, msr-index, KVM, i915 and cpufeatures.
- Update copy of libbpf's hashmap.c.
- Directly return instead of using local ret variable in
evlist__create_syswide_maps(), found by coccinelle.
* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf python: Convert tracepoint.py example to python3
perf evlist: Directly return instead of using local ret variable
perf cpumap: More cpu map reuse by merge.
perf cpumap: Add is_subset function
perf evlist: Rename cpus to user_requested_cpus
perf tools: Stop depending on .git files for building PERF-VERSION-FILE
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools kvm headers arm64: Update KVM headers from the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf beauty: Update copy of linux/socket.h with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
perf stat: Avoid SEGV if core.cpus isn't set
Pull more parisc architecture updates from Helge Deller:
- Revert a patch to the invalidate/flush vmap routines which broke
kernel patching functions on older PA-RISC machines.
- Fix the kernel patching code wrt locking and flushing. Works now on
B160L machine as well.
- Fix CPU IRQ affinity for LASI, WAX and Dino chips
- Add CPU hotplug support
- Detect the hppa-suse-linux-gcc compiler when cross-compiling
* tag 'for-5.18/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix patch code locking and flushing
parisc: Find a new timesync master if current CPU is removed
parisc: Move common_stext into .text section when CONFIG_HOTPLUG_CPU=y
parisc: Rewrite arch_cpu_idle_dead() for CPU hotplugging
parisc: Implement __cpu_die() and __cpu_disable() for CPU hotplugging
parisc: Add PDC locking functions for rendezvous code
parisc: Move disable_sr_hashing_asm() into .text section
parisc: Move CPU startup-related functions into .text section
parisc: Move store_cpu_topology() into text section
parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGY
parisc: Ensure set_firmware_width() is called only once
parisc: Add constants for control registers and clean up mfctl()
parisc: Detect hppa-suse-linux-gcc compiler for cross-building
parisc: Clean up cpu_check_affinity() and drop cpu_set_affinity_irq()
parisc: Fix CPU affinity for Lasi, WAX and Dino chips
Revert "parisc: Fix invalidate/flush vmap routines"
In preparation for runtime calculation of XSAVE offsets cache the feature
flags for each XSTATE component during feature enumeration via CPUID(0xD).
EDX has two relevant bits:
0 Supervisor component
1 Feature storage must be 64 byte aligned
These bits are currently only evaluated during init, but the alignment bit
must be cached to make runtime calculation of XSAVE offsets efficient.
Cache the full EDX content and use it for the existing alignment and
supervisor checks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.573656209@linutronix.de
- Mark mux table as const in clk-mux
- Make the all_lists array const
* clk-mvebu:
clk: mvebu: use time_is_before_eq_jiffies() instead of open coding it
* clk-const:
clk: Mark clk_core_evict_parent_cache_subtree() 'target' const
clk: Mark 'all_lists' as const
clk: pistachio: Declare mux table as const u32[]
clk: qcom: Declare mux table as const u32[]
clk: mmp: Declare mux tables as const u32[]
clk: hisilicon: Remove unnecessary cast of mux table to u32 *
clk: mux: Declare u32 *table parameter as const
clk: nxp: Declare mux table parameter as const u32 *
clk: nxp: Remove unused variable
* clk-imx: (28 commits)
dt-bindings: clock: drop useless consumer example
clk: imx: Select MXC_CLK for i.MX93 clock driver
clk: imx: remove redundant re-assignment of pll->base
MAINTAINERS: clk: imx: add git tree and dt-bindings files
clk: imx: pll14xx: Support dynamic rates
clk: imx: pll14xx: Add pr_fmt
clk: imx: pll14xx: explicitly return lowest rate
clk: imx: pll14xx: name variables after usage
clk: imx: pll14xx: consolidate rate calculation
clk: imx: pll14xx: Use FIELD_GET/FIELD_PREP
clk: imx: pll14xx: Drop wrong shifting
clk: imx: pll14xx: Use register defines consistently
clk: imx8mp: remove SYS PLL 1/2 clock gates
clk: imx8mn: remove SYS PLL 1/2 clock gates
clk: imx8mm: remove SYS PLL 1/2 clock gates
clk: imx: add i.MX93 clk
clk: imx: support fracn gppll
clk: imx: add i.MX93 composite clk
dt-bindings: clock: add i.MX93 clock definition
dt-bindings: clock: Add imx93 clock support
...
* clk-rockchip:
clk: rockchip: re-add rational best approximation algorithm to the fractional divider
clk/rockchip: Use of_device_get_match_data()
clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568
clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568
clk: rockchip: Add more PLL rates for rk3568
We no longer have users for the compatibility clocks and we can drop them.
These are old duplicate clocks for what we using.
Depends-on: 31aa7056bbec ("ARM: dts: Don't use legacy clock defines for dra7 clkctrl")
Depends-on: 9206a3af4fc0 ("clk: ti: Move dra7 clock devices out of the legacy section")
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220203085618.16043-4-tony@atomide.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The sentinel elements of various tables in drivers/clk/actions can be a
bit hard to recognize. Make them easier to see by changing the style
from { 0, 0 } to { /* sentinel */ }.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220218000922.134857-6-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In case there are only one gate or the two_gate is 0 the clk1 clock
passed is not used. We are passing 0 which is arm_pll.
Pass a invalid clock instead.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220222130903.17235-3-shubhrajyoti.datta@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
A bug recently affected the Tegra30 where calling clk_set_rate_range()
on a clock would make it change its rate to the minimum.
This was due to the clock in question being a mux that was orphan at
registration, which lead to the clk_core req_rate being 0, and the
clk_set_rate_range() function then calling clk_set_rate() with req_rate,
effectively making that clock running at the minimum rate allowed, even
though the initial rate was within that range.
Make a test suite to create a mux initially orphan, and then make sure
that if our clock rate was initially within a given range, then
enforcing that range won't affect it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220325161144.1901695-3-maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
qcom,gcc-other Documentation lacks a '|' for the description. This cause
dt_binding_check to incorrectly parse "See also:" as a new value.
Add the missing '|' to correctly parse the description.
Fixes: a03965ed1310 ("dt-bindings: clock: split qcom,gcc.yaml to common and specific schema")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20220323194248.26970-1-ansuelsmth@gmail.com
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We currently change the macro name for fu540 and fu740 by adding the
prefix respectively, these marcos are referenced by some device nodes,
they should be modified as well.
Signed-off-by: Zong Li <zong.li@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/db92d209fa700f7da8bc8028083476fcc138d80e.1646388139.git.zong.li@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Fix printing 'phys_addr' in 'perf script'.
- Fix failure to add events with 'perf probe' in ppc64 due to not
removing leading dot (ppc64 ABIv1).
- Fix cpu_map__item() python binding building.
- Support event alias in form foo-bar-baz, add pmu-events and
parse-event tests for it.
- No need to setup affinities when starting a workload or attaching to
a pid.
- Use path__join() to compose a path instead of ad-hoc snprintf()
equivalent.
- Override attr->sample_period for non-libpfm4 events.
- Use libperf cpumap APIs instead of accessing the internal state
directly.
- Sync x86 arch prctl headers and files changed by the new
set_mempolicy_home_node syscall with the kernel sources.
- Remove duplicate include in cpumap.h.
- Remove redundant err variable.
* tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Remove redundant err variable
perf test: Add parse-events test for aliases with hyphens
perf test: Add pmu-events test for aliases with hyphens
perf parse-events: Support event alias in form foo-bar-baz
perf evsel: Override attr->sample_period for non-libpfm4 events
perf cpumap: Remove duplicate include in cpumap.h
perf cpumap: Migrate to libperf cpumap api
perf python: Fix cpu_map__item() building
perf script: Fix printing 'phys_addr' failure issue
tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall
tools headers UAPI: Sync x86 arch prctl headers with the kernel sources
perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename)
perf evlist: No need to setup affinities when disabling events for pid targets
perf evlist: No need to setup affinities when enabling events for pid targets
perf stat: No need to setup affinities when starting a workload
perf affinity: Allow passing a NULL arg to affinity__cleanup()
perf probe: Fix ppc64 'perf probe add events failed' case
kzalloc is a memory allocation function which can return NULL when some
internal memory errors happen. It is safer to add null pointer check.
Link: https://lkml.kernel.org/r/20220329104004.2376879-1-lv.ruyi@zte.com.cn
Cc: stable@vger.kernel.org
Fixes: c1a3c36017d4 ("proc: bootconfig: Add /proc/bootconfig to show boot config list")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull Kbuild fixes from Masahiro Yamada:
- Fix empty $(PYTHON) expansion.
- Fix UML, which got broken by the attempt to suppress Clang warnings.
- Fix warning message in modpost.
* tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: restore the warning message for missing symbol versions
Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS"
kbuild: Remove '-mno-global-merge'
kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh
kconfig: remove stale comment about removed kconfig_print_symbol()
Convert the tracepoint.py file to python3 as many of the files in
tools/perf are already written in python3.
Committer testing:
# export PYTHONPATH=/tmp/build/perf/python/
# python3 ~acme/git/perf/tools/perf/python/tracepoint.py | head
time 67394457376909 prev_comm=swapper/12 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=gnome-terminal- next_pid=3313 next_prio=120
time 67394457807669 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457811859 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457824929 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457831899 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457842299 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457844179 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457853879 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457856339 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457865659 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
Traceback (most recent call last):
File "/var/home/acme/git/perf/tools/perf/python/tracepoint.py", line 48, in <module>
main()
File "/var/home/acme/git/perf/tools/perf/python/tracepoint.py", line 37, in main
print("time %u prev_comm=%s prev_pid=%d prev_prio=%d prev_state=0x%x ==> next_comm=%s next_pid=%d next_prio=%d" % (
BrokenPipeError: [Errno 32] Broken pipe
#
Signed-off-by: Tanu M <tanu235m@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/linux-perf-users/CAPS78prawYzRZnyhWjgOnGw4EwoswNwztvfZFdCOPOydFzVwzQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following KASAN warning is detected by QEMU.
==================================================================
BUG: KASAN: stack-out-of-bounds in unwind_frame+0x508/0x870
Read of size 4 at addr c36bba90 by task cat/163
CPU: 1 PID: 163 Comm: cat Not tainted 5.10.0-rc1 #40
Hardware name: ARM-Versatile Express
[<c0113fac>] (unwind_backtrace) from [<c010e71c>] (show_stack+0x10/0x14)
[<c010e71c>] (show_stack) from [<c0b805b4>] (dump_stack+0x98/0xb0)
[<c0b805b4>] (dump_stack) from [<c0b7d658>] (print_address_description.constprop.0+0x58/0x4bc)
[<c0b7d658>] (print_address_description.constprop.0) from [<c031435c>] (kasan_report+0x154/0x170)
[<c031435c>] (kasan_report) from [<c0113c44>] (unwind_frame+0x508/0x870)
[<c0113c44>] (unwind_frame) from [<c010e298>] (__save_stack_trace+0x110/0x134)
[<c010e298>] (__save_stack_trace) from [<c01ce0d8>] (stack_trace_save+0x8c/0xb4)
[<c01ce0d8>] (stack_trace_save) from [<c0313520>] (kasan_set_track+0x38/0x60)
[<c0313520>] (kasan_set_track) from [<c0314cb8>] (kasan_set_free_info+0x20/0x2c)
[<c0314cb8>] (kasan_set_free_info) from [<c0313474>] (__kasan_slab_free+0xec/0x120)
[<c0313474>] (__kasan_slab_free) from [<c0311e20>] (kmem_cache_free+0x7c/0x334)
[<c0311e20>] (kmem_cache_free) from [<c01c35dc>] (rcu_core+0x390/0xccc)
[<c01c35dc>] (rcu_core) from [<c01013a8>] (__do_softirq+0x180/0x518)
[<c01013a8>] (__do_softirq) from [<c0135214>] (irq_exit+0x9c/0xe0)
[<c0135214>] (irq_exit) from [<c01a40e4>] (__handle_domain_irq+0xb0/0x110)
[<c01a40e4>] (__handle_domain_irq) from [<c0691248>] (gic_handle_irq+0xa0/0xb8)
[<c0691248>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x94)
Exception stack(0xc36bb928 to 0xc36bb970)
b920: c36bb9c0 00000000 c0126919 c0101228 c36bb9c0 b76d7730
b940: c36b8000 c36bb9a0 c3335b00 c01ce0d8 00000003 c36bba3c c36bb940 c36bb978
b960: c010e298 c011373c 60000013 ffffffff
[<c0100b0c>] (__irq_svc) from [<c011373c>] (unwind_frame+0x0/0x870)
[<c011373c>] (unwind_frame) from [<00000000>] (0x0)
The buggy address belongs to the page:
page:(ptrval) refcount:0 mapcount:0 mapping:00000000 index:0x0 pfn:0x636bb
flags: 0x0()
raw: 00000000 00000000 ef867764 00000000 00000000 00000000 ffffffff 00000000
page dumped because: kasan: bad access detected
addr c36bba90 is located in stack of task cat/163 at offset 48 in frame:
stack_trace_save+0x0/0xb4
this frame has 1 object:
[32, 48) 'trace'
Memory state around the buggy address:
c36bb980: f1 f1 f1 f1 00 04 f2 f2 00 00 f3 f3 00 00 00 00
c36bba00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
>c36bba80: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
^
c36bbb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c36bbb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
There is a same issue on x86 and has been resolved by the commit f7d27c35ddff
("x86/mm, kasan: Silence KASAN warnings in get_wchan()").
The solution could be applied to arm architecture too.
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Reported-by: He Ying <heying24@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Since commit 251cc826be7d ("ARM: 9154/1: decompressor: do not copy source
files while building"), the following three are rebuilt every time.
AS arch/arm/boot/compressed/lib1funcs.o
AS arch/arm/boot/compressed/ashldi3.o
AS arch/arm/boot/compressed/bswapsdi2.o
Move the "OBJS += ..." line up so these objects are added to 'targets'.
Fixes: 251cc826be7d ("ARM: 9154/1: decompressor: do not copy source files while building")
Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Now that all usages of the functions defined in "pci-dma-compat.h" have
been removed, it is time to remove this file as well.
In order not to break builds, move the "#include <linux/dma-mapping.h>"
that was in "pci-dma-compat.h" into "include/linux/pci.h"
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pull module update from Luis Chamberlain:
"There is only one patch which qualifies for modules for v5.18-rc1 and
its a small fix from Dan Carpenter for lib/test_kmod module.
The rest of the changes are too major and landed in modules-testing
too late for inclusion. The good news is that most of the major
changes for v5.19 is going to be tested very early through linux-next.
This simple fix is all we have for modules for v5.18-rc1"
* tag 'modules-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
lib/test: use after free in register_test_dev_kmod()
This change fixes the following:
1) The flags variable is not initialized. Always use raw_spin_lock_irqsave
and raw_spin_unlock_irqrestore to serialize patching.
2) flush_kernel_vmap_range is primarily intended for DMA flushes. Since
__patch_text_multiple is often called with interrupts disabled, it is
better to directly call flush_kernel_dcache_range_asm and
flush_kernel_icache_range_asm. This avoids an extra call.
3) The final call to flush_icache_range is unnecessary.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Reading XSTATE feature information from CPUID over and over does not make
sense. The information has to be cached anyway, so it can be done early.
Prepare for runtime calculation of XSTATE offsets and allow
consolidation of the size calculation functions in a later step.
Rename the function while at it as it does not setup any features.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.519411939@linutronix.de
- Kunit tests for clk-gate implementation
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add
support for dynamic mode
* clk-xilinx:
clk: zynqmp: replace warn_once with pr_debug for failed clock ops
* clk-kunit:
clk: gate: Add some kunit test suites
* clk-cs2000:
clk: cs2000-cp: convert driver to regmap
clk: cs2000-cp: freeze config during register fiddling
clk: cs2000-cp: make clock skip setting configurable
clk: cs2000-cp: add support for dynamic mode
clk: cs2000-cp: Make aux output function controllable
dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode
dt-bindings: clock: cs2000-cp: document cirrus,clock-skip flag
dt-bindings: clock: cs2000-cp: document aux-output-source
dt-bindings: clock: convert cs2000-cp bindings to yaml
* clk-renesas:
dt-bindings: clock: renesas: Make example 'clocks' parsable
clk: rs9: Add Renesas 9-series PCIe clock generator driver
clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
clk: renesas: r8a779f0: Add PFC clock
clk: renesas: r8a779f0: Add I2C clocks
clk: renesas: r8a779f0: Add WDT clock
clk: renesas: r8a779f0: Fix RSW2 clock divider
clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC
dt-bindings: clock: renesas: Document RZ/V2L SoC
dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions
clk: renesas: r8a779a0: Add CANFD module clock
clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3
clk: renesas: r8a7799[05]: Add MLP clocks
clk: renesas: r8a779f0: Add SYS-DMAC clocks
Consumer examples in the bindings of resource providers are trivial,
useless and duplication of code. Remove the example code for consumer
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220316130858.93455-2-krzysztof.kozlowski@canonical.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull Rockchip clk driver updates from Heiko Stuebner:
- Improve the clocks for the rk3568 display outputs (parenting, pll-rates)
- Use of_device_get_match_data() instead of open-coding on rk3568
- Reintroduce the expected fractional-divider behaviour that disappeared
with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
* tag 'v5.18-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: re-add rational best approximation algorithm to the fractional divider
clk/rockchip: Use of_device_get_match_data()
clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568
clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568
clk: rockchip: Add more PLL rates for rk3568
Unlike the system clocks there are audio clocks that combine both
multiplexer/divider and gate/multiplexer/divider, so add support for
that.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220126173953.1016706-7-kernel@esmil.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>