tjh.dev
commits
Pull x86 fixes from Thomas Gleixner:
"Hopefully the last round of fixes for 3.19
- regression fix for the LDT changes
- regression fix for XEN interrupt handling caused by the APIC
changes
- regression fixes for the PAT changes
- last minute fixes for new the MPX support
- regression fix for 32bit UP
- fix for a long standing relocation issue on 64bit tagged for stable
- functional fix for the Hyper-V clocksource tagged for stable
- downgrade of a pr_err which tends to confuse users
Looks a bit on the large side, but almost half of it are valuable
comments"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Change Fast TSC calibration failed from error to info
x86/apic: Re-enable PCI_MSI support for non-SMP X86_32
x86, mm: Change cachemode exports to non-gpl
x86, tls: Interpret an all-zero struct user_desc as "no segment"
x86, tls, ldt: Stop checking lm in LDT_empty
x86, mpx: Strictly enforce empty prctl() args
x86, mpx: Fix potential performance issue on unmaps
x86, mpx: Explicitly disable 32-bit MPX support on 64-bit kernels
x86, hyperv: Mark the Hyper-V clocksource as being continuous
x86: Don't rely on VMWare emulating PAT MSR correctly
x86, irq: Properly tag virtualization entry in /proc/interrupts
x86, boot: Skip relocs when load address unchanged
x86/xen: Override ACPI IRQ management callback __acpi_unregister_gsi
ACPI: pci: Do not clear pci_dev->irq in acpi_pci_irq_disable()
x86/xen: Treat SCI interrupt as normal GSI interrupt
Pull irq fixes from Thomas Gleixner:
"From the irqchip departement you get:
- regression fix for omap-intc
- regression fix for atmel-aic-common
- functional correctness fix for hip04
- type mismatch fix for gic-v3-its
- proper error pointer check for mtd-sysirq
Mostly one and two liners except for the omap regression fix which is
slightly larger than desired"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type
irqchip: omap-intc: Fix legacy DMA regression
irqchip: gic-v3-its: Fix use of max with decimal constant
irqchip: hip04: Initialize hip04_cpu_map to 0xffff
irqchip: mtk-sysirq: Use IS_ERR() instead of NULL pointer check
Many users see this message when booting without knowning that it is
of no importance and that TSC calibration may have succeeded by
another way.
As explained by Paul Bolle in
http://lkml.kernel.org/r/1348488259.1436.22.camel@x61.thuisdomein
"Fast TSC calibration failed" should not be considered as an error
since other calibration methods are being tried afterward. At most,
those send a warning if they fail (not an error). So let's change
the message from error to warning.
[ tglx: Make if pr_info. It's really not important at all ]
Fixes: c767a54ba065 x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1418106470-6906-1-git-send-email-alexandre.f.demers@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull timer fixes from Thomas Gleixner:
"A set of small fixes:
- regression fix for exynos_mct clocksource
- trivial build fix for kona clocksource
- functional one liner fix for the sh_tmu clocksource
- two validation fixes to prevent (root only) data corruption in the
kernel via settimeofday and adjtimex. Tagged for stable"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: adjtimex: Validate the ADJ_FREQUENCY values
time: settimeofday: Validate the values of tv from user
clocksource: sh_tmu: Set cpu_possible_mask to fix SMP broadcast
clocksource: kona: fix __iomem annotation
clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write
irqchip urgent fixes for v3.19 from Jason Cooper
- mtk-sysirq: Fix error handling
- hip04: Fix cpu map for 16bit value
- gic-v3-its: Clear a warning regarding decimal constants
- omap-intc: Fix legacy DMA regression
- atmel-aic-common: Retain priority when changing type
Commit 0dbc6078c06bc0 ('x86, build, pci: Fix PCI_MSI build on !SMP')
introduced the dependency that X86_UP_APIC is only available when
PCI_MSI is false. This effectively prevents PCI_MSI support on 32bit
UP systems because it disables both APIC and IO-APIC. But APIC support
is architecturally required for PCI_MSI.
The intention of the patch was to enforce APIC support when PCI_MSI is
enabled, but failed to do so.
Remove the !PCI_MSI dependency from X86_UP_APIC and enforce
X86_UP_APIC when PCI_MSI support is enabled on 32bit UP systems.
[ tglx: Massaged changelog ]
Fixes 0dbc6078c06bc0 'x86, build, pci: Fix PCI_MSI build on !SMP'
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1421967529-9037-1-git-send-email-pure.logic@nexus-software.ie
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull ARM SoC fixes from Olof Johansson:
"A week's worth of fixes for various ARM platforms. Diff wise, the
largest fix is for OMAP to deal with how GIC now registers interrupts
(irq_domain_add_legacy() -> irq_domain_add_linear() changes).
Besides this, a few more renesas platforms needed the GIC instatiation
done for legacy boards. There's also a fix that disables coherency of
mvebu due to issues, and a few other smaller fixes"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: add baud rate to Juno stdout-path
ARM: dts: imx25: Fix PWM "per" clocks
bus: mvebu-mbus: fix support of MBus window 13
Merge tag 'mvebu-fixes-3.19-3' of git://git.infradead.org/linux-mvebu into fixes
ARM: mvebu: completely disable hardware I/O coherency
ARM: OMAP: Work around hardcoded interrupts
ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds
ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds
arm: boot: dts: dra7: enable dwc3 suspend PHY quirk
Pull urgent fixes from John Stultz:
Two urgent fixes for user triggerable time related overflow issues
Since the rework of the sparse interrupt code to actually free the
unused interrupt descriptors there exists a race between the /proc
interfaces to the irq subsystem and the code which frees the interrupt
descriptor.
CPU0 CPU1
show_interrupts()
desc = irq_to_desc(X);
free_desc(desc)
remove_from_radix_tree();
kfree(desc);
raw_spinlock_irq(&desc->lock);
/proc/interrupts is the only interface which can actively corrupt
kernel memory via the lock access. /proc/stat can only read from freed
memory. Extremly hard to trigger, but possible.
The interfaces in /proc/irq/N/ are not affected by this because the
removal of the proc file is serialized in procfs against concurrent
readers/writers. The removal happens before the descriptor is freed.
For architectures which have CONFIG_SPARSE_IRQ=n this is a non issue
as the descriptor is never freed. It's merely cleared out with the irq
descriptor lock held. So any concurrent proc access will either see
the old correct value or the cleared out ones.
Protect the lookup and access to the irq descriptor in
show_interrupts() with the sparse_irq_lock.
Provide kstat_irqs_usr() which is protecting the lookup and access
with sparse_irq_lock and switch /proc/stat to use it.
Document the existing kstat_irqs interfaces so it's clear that the
caller needs to take care about protection. The users of these
interfaces are either not affected due to SPARSE_IRQ=n or already
protected against removal.
Fixes: 1f5a5b87f78f "genirq: Implement a sane sparse_irq allocator"
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
This patch makes the bitmask for AIC_SRCTYPE consistent
with that of its valid values, and prevents the priority
field at bits 2:0 from being clobbered by an incorrect
AND with the AIC_SRCTYPE mask.
Signed-off-by: Gavin Li <gavinli@thegavinli.com>
Cc: <stable@vger.kernel.org> # v3.17+
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Link: https://lkml.kernel.org/r/1420598843-8409-1-git-send-email-gavinli@thegavinli.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Commit 281d4078bec3 ("x86: Make page cache mode a real type")
introduced the symbols __cachemode2pte_tbl and __pte2cachemode_tbl and
exported them via EXPORT_SYMBOL_GPL. The exports are part of a
replacement of code which has been EXPORT_SYMBOL before these changes
resulting in build breakage of out-of-tree non-gpl modules.
Change EXPORT_SYMBOL_GPL to EXPORT-SYMBOL for these two symbols.
Fixes: 281d4078bec3 "x86: Make page cache mode a real type"
Reported-and-tested-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/1421926997-28615-1-git-send-email-jgross@suse.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull vfs fixes from Al Viro:
"A couple of fixes - deadlock in CIFS and build breakage in cris serial
driver (resurfaced f_dentry in there)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Convert file->f_dentry->d_inode to file_inode()
fix deadlock in cifs_ioctl_clone()
Merge "ARM: imx: fixes for 3.19, 2nd round" from Shawn Guo:
The i.MX fixes for 3.19, 2nd round:
- Correct pwm clock assignment in i.MX25 device tree to fix the broken
pwm support on i.MX25
* tag 'imx-fixes-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx25: Fix PWM "per" clocks
Signed-off-by: Olof Johansson <olof@lixom.net>
Update the TMU driver to use cpu_possible_mask as cpumask to make
r8a7779 SMP work as expected with or without the ARM TWD timer.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Verify that the frequency value from userspace is valid and makes sense.
Unverified values can cause overflows later on.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[jstultz: Fix up bug for negative values and drop redunent cap check]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Pull x86 microcode loading updates from Ingo Molnar:
"The main changes in this cycle are:
- Reload microcode when resuming and the case when only the early
loader has been utilized. (Borislav Petkov)
- Also, do not load the driver on paravirt guests. (Boris
Ostrovsky)"
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/intel: Fish out the stashed microcode for the BSP
x86, microcode: Reload microcode on resume
x86, microcode: Don't initialize microcode code on paravirt
x86, microcode, intel: Drop unused parameter
x86, microcode, AMD: Do not use smp_processor_id() in preemtible context
commit 55601c9f2467 (arm: omap: intc: switch over
to linear irq domain) introduced a regression with
SDMA legacy driver because that driver strictly depends
on INTC's IRQs starting at NR_IRQs. Aparently
irq_domain_add_linear() won't guarantee that, since we see
a 7 IRQs difference when booting with and without the
commit cited above.
Until arch/arm/plat-omap/dma.c is properly fixed, we
must maintain OMAP2/3 using irq_domain_add_legacy().
A FIXME note was added so people know to delete that
code once that legacy DMA driver is fixed up.
Fixes: 55601c9f2467 (arm: omap: intc: switch over to linear irq domain)
Cc: <stable@vger.kernel.org> # v3.18
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Link: https://lkml.kernel.org/r/1420576688-10604-1-git-send-email-balbi@ti.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The Witcher 2 did something like this to allocate a TLS segment index:
struct user_desc u_info;
bzero(&u_info, sizeof(u_info));
u_info.entry_number = (uint32_t)-1;
syscall(SYS_set_thread_area, &u_info);
Strictly speaking, this code was never correct. It should have set
read_exec_only and seg_not_present to 1 to indicate that it wanted
to find a free slot without putting anything there, or it should
have put something sensible in the TLS slot if it wanted to allocate
a TLS entry for real. The actual effect of this code was to
allocate a bogus segment that could be used to exploit espfix.
The set_thread_area hardening patches changed the behavior, causing
set_thread_area to return -EINVAL and crashing the game.
This changes set_thread_area to interpret this as a request to find
a free slot and to leave it empty, which isn't *quite* what the game
expects but should be close enough to keep it working. In
particular, using the code above to allocate two segments will
allocate the same segment both times.
According to FrostbittenKing on Github, this fixes The Witcher 2.
If this somehow still causes problems, we could instead allocate
a limit==0 32-bit data segment, but that seems rather ugly to me.
Fixes: 41bdc78544b8 x86/tls: Validate TLS entries to protect espfix
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: stable@vger.kernel.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/0cb251abe1ff0958b8e468a9a9a905b80ae3a746.1421954363.git.luto@amacapital.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull device mapper fixes from Mike Snitzer:
"Two stable fixes for dm-cache and one 3.19 DM core fix:
- fix potential for dm-cache metadata corruption via stale metadata
buffers being used when switching an inactive cache table to
active; this could occur due to each table having it's own bufio
client rather than sharing the client between tables.
- fix dm-cache target to properly account for discard IO while
suspending otherwise IO quiescing could complete prematurely.
- fix DM core's handling of multiple internal suspends by maintaining
an 'internal_suspend_count' and only resuming the device when this
count drops to zero"
* tag 'dm-3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix handling of multiple internal suspends
dm cache: fix problematic dual use of a single migration count variable
dm cache: share cache-metadata object across inactive and active DM tables
Convert file->f_dentry->d_inode to file_inode() so as to get layered
filesystems right.
Found with: git grep '[.>]f_dentry'
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Without explicit command-line parameters, the Juno UART ends up running
at 57600 baud in the kernel, which is at odds with the 115200 baud used
by the rest of the firmware. Since commit 7914a7c5651a5161 now lets us
fix this by specifying default options in stdout-path, do so.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Currently PWM functionality is broken on mx25 due to the wrong assignment of the
PWM "per" clock.
According to Documentation/devicetree/bindings/clock/imx25-clock.txt:
pwm_ipg_per 52
,so update the pwm "per" to use 'pwm_ipg_per' instead of 'per10' clock.
With this change PWM can work fine on mx25.
Cc: <stable@vger.kernel.org>
Reported-by: Carlos Soto <csotoalonso@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
It makes no sense to hide the __iomem annotation from the function
that uses it, especially since it causes a sparse warning:
drivers/clocksource/bcm_kona_timer.c:118:38: warning: incorrect type in argument 1 (different address spaces)
drivers/clocksource/bcm_kona_timer.c:118:38: expected void *timer_base
drivers/clocksource/bcm_kona_timer.c:118:38: got void [noderef] <asn:2>*static [toplevel] tmr_regs
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
An unvalidated user input is multiplied by a constant, which can result in
an undefined behaviour for large values. While this is validated later,
we should avoid triggering undefined behaviour.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[jstultz: include trivial milisecond->microsecond correction noticed
by Andy]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Pull x86 vdso updates from Ingo Molnar:
"Various vDSO updates from Andy Lutomirski, mostly cleanups and
reorganization to improve maintainability, but also some
micro-optimizations and robustization changes"
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86_64/vsyscall: Restore orig_ax after vsyscall seccomp
x86_64: Add a comment explaining the TASK_SIZE_MAX guard page
x86_64,vsyscall: Make vsyscall emulation configurable
x86_64, vsyscall: Rewrite comment and clean up headers in vsyscall code
x86_64, vsyscall: Turn vsyscalls all the way off when vsyscall==none
x86,vdso: Use LSL unconditionally for vgetcpu
x86: vdso: Fix build with older gcc
x86_64/vdso: Clean up vgetcpu init and merge the vdso initcalls
x86_64/vdso: Remove jiffies from the vvar page
x86/vdso: Make the PER_CPU segment 32 bits
x86/vdso: Make the PER_CPU segment start out accessed
x86/vdso: Change the PER_CPU segment to use struct desc_struct
x86_64/vdso: Move getcpu code from vsyscall_64.c to vdso/vma.c
x86_64/vsyscall: Move all of the gate_area code to vsyscall_64.c
I'm such a moron! The simple solution of saving the BSP patch
for use on resume was too simple (and wrong!), hint:
sizeof(struct microcode_intel).
What needs to be done instead is to fish out the microcode patch
we have stashed previously and apply that on the BSP in case the
late loader hasn't been utilized.
So do that instead.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20141208110820.GB20057@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
arm64 defconfig spits out the following compiler warning from the ITS
driver:
In file included from include/linux/bitmap.h:9:0,
from drivers/irqchip/irq-gic-v3-its.c:18:
drivers/irqchip/irq-gic-v3-its.c: In function ‘its_create_device’:
include/linux/kernel.h:716:17: warning: comparison of distinct pointer types lacks a cast
(void) (&_max1 == &_max2); \
^
drivers/irqchip/irq-gic-v3-its.c:1056:12: note: in expansion of macro ‘max’
nr_ites = max(2, roundup_pow_of_two(nvecs));
Fix the warning by specifying the decimal constant `2' explicitly as an
unsigned long type.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1418825469-30529-1-git-send-email-will.deacon@arm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
32-bit programs don't have an lm bit in their ABI, so they can't
reliably cause LDT_empty to return true without resorting to memset.
They shouldn't need to do this.
This should fix a longstanding, if minor, issue in all 64-bit kernels
as well as a potential regression in the TLS hardening code.
Fixes: 41bdc78544b8 x86/tls: Validate TLS entries to protect espfix
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/72a059de55e86ad5e2935c80aa91880ddf19d07c.1421954363.git.luto@amacapital.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull two block layer fixes from Jens Axboe:
"Two small patches that should make it into 3.19:
- a fixup from me for NVMe, making the cq_vector a signed variable.
Otherwise our -1 comparison fails, and commit 2b25d981790b doesn't
do what it was supposed to.
- a fixup for the hotplug handling for blk-mq from Ming Lei, using
the proper kobject referencing to ensure we release resources at
the right time"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: fix hctx/ctx kobject use-after-free
NVMe: cq_vector should be signed
Commit ffcc393641 ("dm: enhance internal suspend and resume interface")
attempted to handle multiple internal suspends on the same device, but
it did that incorrectly. When these functions are called in this order
on the same device the device is no longer suspended, but it should be:
dm_internal_suspend_noflush
dm_internal_suspend_noflush
dm_internal_resume
Fix this bug by maintaining an 'internal_suspend_count' and resuming
the device when this count drops to zero.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
It really needs to check that src is non-directory *and* use
{un,}lock_two_nodirectories(). As it is, it's trivial to cause
double-lock (ioctl(fd, CIFS_IOC_COPYCHUNK_FILE, fd)) and if the
last argument is an fd of directory, we are asking for trouble
by violating the locking order - all directories go before all
non-directories. If the last argument is an fd of parent
directory, it has 50% odds of locking child before parent,
which will cause AB-BA deadlock if we race with unlink().
Cc: stable@vger.kernel.org @ 3.13+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge "mvebu/fixes #3" from Andrew Lunn:
mvebu fixes for 3.19. (Part 4)
bus: mvebu-mbus: fix support of MBus window 13
* tag 'mvebu-fixes-3.19-4' of git://git.infradead.org/linux-mvebu:
bus: mvebu-mbus: fix support of MBus window 13
ARM: mvebu: completely disable hardware I/O coherency
Signed-off-by: Olof Johansson <olof@lixom.net>
GPIO2_5 is the reset GPIO for the USB3317 ULPI PHY. Instead of modelling it as
a regulator, the correct approach is to use the 'reset_gpios' property of the
"usb-nop-xceiv" node.
GPIO1_7 is the reset GPIO for the USB2517 USB hub. As we currently don't have
dt bindings to describe a HUB reset, let's keep using the regulator approach.
Rename the regulator to 'reg_hub_reset' to better describe its function and bind
it with the USB host1 port instead.
USB host support has been introduced by commit 9bf206a9d13be3 ("ARM: dts:
imx51-babbage: Add USB Host1 support"), which landed in 3.16 and it seems that
USB has only been functional due to previous bootloader initialization.
With this patch applied we can get USB host to work without relying on the
bootloader.
Cc: <stable@vger.kernel.org> # 3.16+
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
EXYNOS4_MCT_L_MASK is defined as 0xffffff00, so applying this bitmask
produces a number outside the range 0x00 to 0xff, which always results
in execution of the default switch statement.
Obviously this is wrong and git history shows that the bitmask inversion
was incorrectly set during a refactoring of the MCT code.
Fix this by putting the inversion at the correct position again.
Cc: stable@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Reported-by: GP Orcullo <kinsamanka@gmail.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Pull x86 RAS update from Ingo Molnar:
"The biggest change in this cycle is better support for UCNA
(UnCorrected No Action) events:
"Handle all uncorrected error reports in the same way (soft
offline the page). We used to only do that for SRAO
(software recoverable action optional) machine checks, but
it makes sense to also do it for UCNA (UnCorrected No
Action) logs found by CMCI or polling."
plus various x86 MCE handling updates and fixes"
* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Spell "panicked" correctly
x86, mce: Support memory error recovery for both UCNA and Deferred error in machine_check_poll
x86, mce, severity: Extend the the mce_severity mechanism to handle UCNA/DEFERRED error
x86, MCE, AMD: Assign interrupt handler only when bank supports it
x86, MCE, AMD: Drop software-defined bank in error thresholding
x86, MCE, AMD: Move invariant code out from loop body
x86, MCE, AMD: Correct thresholding error logging
x86, MCE, AMD: Use macros to compute bank MSRs
RAS, HWPOISON: Fix wrong error recovery status
GHES: Make ghes_estatus_caches static
APEI, GHES: Cleanup unnecessary function for lockless list
The vsyscall emulation code sets orig_ax for seccomp's benefit,
but it forgot to set it back.
I'm not sure that this is observable at all, but it could cause
confusion to various /proc or ptrace users, and it's possible
that it could cause minor artifacts if a signal were to be
delivered on return from vsyscall emulation.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/cdc6a564517a4df09235572ee5f530ccdcf933f7.1415144089.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 microcode fixes from Borislav Petkov:
"Reload microcode when resuming and the case when only the early loader
has been utilized.
Also, do not load the driver on paravirt guests, from Boris Ostrovsky."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
HiP04 GIC extends to support 16 cores, so we should
initialize the hip04_cpu_map to 0xffff.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Link: https://lkml.kernel.org/r/1418295816-179583-1-git-send-email-long.wanglong@huawei.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Description from Michael Kerrisk. He suggested an identical patch
to one I had already coded up and tested.
commit fe3d197f8431 "x86, mpx: On-demand kernel allocation of bounds
tables" added two new prctl() operations, PR_MPX_ENABLE_MANAGEMENT and
PR_MPX_DISABLE_MANAGEMENT. However, no checks were included to ensure
that unused arguments are zero, as is done in many existing prctl()s
and as should be done for all new prctl()s. This patch adds the
required checks.
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Suggested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20150108223022.7F56FD13@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
pULL SCSI fixes from James Bottomley:
"This consists of four real fixes and three MAINTAINER updates.
Three of the fixes are obvious (the DIX and atomic allocation are bug
on and warn on fixes and the other is just trivial) and the ipr one is
a bit more involved but is required because without it, the card
double completes aborted commands and causes a kernel oops"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
MAINTAINERS: ibmvscsi driver maintainer change
MAINTAINERS: ibmvfc driver maintainer change
MAINTAINERS: Remove self as isci maintainer
scsi_debug: test always evaluates to false, || should be used instead
scsi: Avoid crashing if device uses DIX but adapter does not support it
scsi_debug: use atomic allocation in resp_rsup_opcodes
ipr: wait for aborted command responses
The kobject memory shouldn't have been freed before the kobject
is released because driver core can access it freely before its
release.
This patch frees hctx in its release callback. For ctx, they
share one single per-cpu variable which is associated with
the request queue, so free ctx in q->mq_kobj's release handler.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
(fix ctx kobjects)
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Introduce a new variable to count the number of allocated migration
structures. The existing variable cache->nr_migrations became
overloaded. It was used to:
i) track of the number of migrations in flight for the purposes of
quiescing during suspend.
ii) to estimate the amount of background IO occuring.
Recent discard changes meant that REQ_DISCARD bios are processed with
a migration. Discards are not background IO so nr_migrations was not
incremented. However this could cause quiescing to complete early.
(i) is now handled with a new variable cache->nr_allocated_migrations.
cache->nr_migrations has been renamed cache->nr_io_migrations.
cleanup_migration() is now called free_io_migration(), since it
decrements that variable.
Also, remove the unused cache->next_migration variable that got replaced
with with prealloc_structs a while ago.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Merge "Second Round of Renesas ARM Based SoC Fixes for v3.19" from Simon
Horman:
* Instantiate GIC from C board code in legacy builds on r8a7778 and r8a7779
* tag 'renesas-soc-fixes2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds
ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds
Signed-off-by: Olof Johansson <olof@lixom.net>
On Armada XP, 375 and 38x the MBus window 13 has the remap capability,
like windows 0 to 7. However, the mvebu-mbus driver isn't currently
taking into account this special case, which means that when window 13
is actually used, the remap registers are left to 0, making the device
using this MBus window unavailable.
As a minimal fix for stable, don't use window 13. A full fix will
follow later.
Fixes: fddddb52a6c ("bus: introduce an Marvell EBU MBus driver")
Cc: <stable@vger.kernel.org> # v3.10+
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
The default qspi2_clk_sel field of register CCM_CS2CDR contains '110' which is
marked as 'reserved', so we can't rely on the default value.
Provide a proper parent for QSPI clocks to avoid a kernel oops:
[ 1.037920] Division by zero in kernel.
[ 1.041807] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc7-next-20141204-00002-g5aa23e1 #2143
[ 1.050967] Hardware name: Freescale i.MX6 SoloX (Device Tree)
[ 1.056853] Backtrace:
[ 1.059360] [<80011ea0>] (dump_backtrace) from [<8001203c>] (show_stack+0x18/0x1c)
[ 1.066982] r6:00000000 r5:00000000 r4:00000000 r3:00000000
[ 1.072754] [<80012024>] (show_stack) from [<806b7100>] (dump_stack+0x88/0xa4)
[ 1.080038] [<806b7078>] (dump_stack) from [<80011d20>] (__div0+0x18/0x20)
[ 1.086958] r5:be018500 r4:be017c00
[ 1.090600] [<80011d08>] (__div0) from [<802aa418>] (Ldiv0+0x8/0x10)
[ 1.097012] [<80504fbc>] (clk_divider_set_rate) from [<80503ddc>] (clk_change_rate+0x14c/0x17c)
[ 1.105759] r7:00000000 r6:00000000 r5:be018500 r4:00000000
[ 1.111516] [<80503c90>] (clk_change_rate) from [<80503ea0>] (clk_set_rate+0x94/0x98)
[ 1.119391] r8:be7e0368 r7:00000000 r6:be11a000 r5:be018500 r4:00000000 r3:00000000
[ 1.127290] [<80503e0c>] (clk_set_rate) from [<80410558>] (fsl_qspi_probe+0x23c/0x75c)
[ 1.135260] r5:be11a010 r4:be350010
[ 1.138900] [<8041031c>] (fsl_qspi_probe) from [<80385a18>] (platform_drv_probe+0x50/0xac)
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
commit 4dbd27711cd9 "tick: export nohz tick idle symbols for module
use" was merged via the thermal tree without an explicit ack from the
relevant maintainers.
The exports are abused by the intel powerclamp driver which implements
a fake idle state from a sched FIFO task. This causes all kinds of
wreckage in the NOHZ core code which rightfully assumes that
tick_nohz_idle_enter/exit() are only called from the idle task itself.
Recent changes in the NOHZ core lead to a failure of the powerclamp
driver and now people try to hack completely broken and backwards
workarounds into the NOHZ core code. This is completely unacceptable
and just papers over the real problem. There are way more subtle
issues lurking around the corner.
The real solution is to fix the powerclamp driver by rewriting it with
a sane concept, but that's beyond the scope of this.
So the only solution for now is to remove the calls into the core NOHZ
code from the powerclamp trainwreck along with the exports.
Fixes: d6d71ee4a14a "PM: Introduce Intel PowerClamp Driver"
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Pan Jacob jun <jacob.jun.pan@intel.com>
Cc: LKP <lkp@01.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412181110110.17382@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull libata fixes from Tejun Heo:
"Three libata fixes for v3.18. Nothing too interesting. PCI ID ID and
quirk additions to ahci and an error handling path fix in sata_fsl"
* 'for-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: disable MSI on SAMSUNG 0xa800 SSD
sata_fsl: fix error handling of irq_of_parse_and_map
AHCI: Add DeviceIDs for Sunrise Point-LP SATA controller
Pull x86 mm tree changes from Ingo Molnar:
"The biggest change is full PAT support from Jürgen Gross:
The x86 architecture offers via the PAT (Page Attribute Table) a
way to specify different caching modes in page table entries. The
PAT MSR contains 8 entries each specifying one of 6 possible cache
modes. A pte references one of those entries via 3 bits:
_PAGE_PAT, _PAGE_PWT and _PAGE_PCD.
The Linux kernel currently supports only 4 different cache modes.
The PAT MSR is set up in a way that the setting of _PAGE_PAT in a
pte doesn't matter: the top 4 entries in the PAT MSR are the same
as the 4 lower entries.
This results in the kernel not supporting e.g. write-through mode.
Especially this cache mode would speed up drivers of video cards
which now have to use uncached accesses.
OTOH some old processors (Pentium) don't support PAT correctly and
the Xen hypervisor has been using a different PAT MSR configuration
for some time now and can't change that as this setting is part of
the ABI.
This patch set abstracts the cache mode from the pte and introduces
tables to translate between cache mode and pte bits (the default
cache mode "write back" is hard-wired to PAT entry 0). The tables
are statically initialized with values being compatible to old
processors and current usage. As soon as the PAT MSR is changed
(or - in case of Xen - is read at boot time) the tables are changed
accordingly. Requests of mappings with special cache modes are
always possible now, in case they are not supported there will be a
fallback to a compatible but slower mode.
Summing it up, this patch set adds the following features:
- capability to support WT and WP cache modes on processors with
full PAT support
- processors with no or uncorrect PAT support are still working as
today, even if WT or WP cache mode are selected by drivers for
some pages
- reduction of Xen special handling regarding cache mode
Another change is a boot speedup on ridiculously large RAM systems,
plus other smaller fixes"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86: mm: Move PAT only functions to mm/pat.c
xen: Support Xen pv-domains using PAT
x86: Enable PAT to use cache mode translation tables
x86: Respect PAT bit when copying pte values between large and normal pages
x86: Support PAT bit in pagetable dump for lower levels
x86: Clean up pgtable_types.h
x86: Use new cache mode type in memtype related functions
x86: Use new cache mode type in mm/ioremap.c
x86: Use new cache mode type in setting page attributes
x86: Remove looking for setting of _PAGE_PAT_LARGE in pageattr.c
x86: Use new cache mode type in track_pfn_remap() and track_pfn_insert()
x86: Use new cache mode type in mm/iomap_32.c
x86: Use new cache mode type in asm/pgtable.h
x86: Use new cache mode type in arch/x86/mm/init_64.c
x86: Use new cache mode type in arch/x86/pci
x86: Use new cache mode type in drivers/video/fbdev/vermilion
x86: Use new cache mode type in drivers/video/fbdev/gbefb.c
x86: Use new cache mode type in include/asm/fb.h
x86: Make page cache mode a real type
x86: mm: Use 2GB memory block size on large-memory x86-64 systems
...
We need the additional "k" to make it a hard-c:
https://en.wiktionary.org/wiki/panicked
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1417642605-15730-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
That guard page is absolutely necessary; explain why for
posterity.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/23320cb5017c2da8475ec20fcde8089d82aa2699.1415144745.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Hand down the cpu number instead, otherwise lockdep screams when doing
echo 1 > /sys/devices/system/cpu/microcode/reload.
BUG: using smp_processor_id() in preemptible [00000000] code: amd64-microcode/2470
caller is debug_smp_processor_id+0x12/0x20
CPU: 1 PID: 2470 Comm: amd64-microcode Not tainted 3.18.0-rc6+ #26
...
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1417428741-4501-1-git-send-email-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Normally, we do reapply microcode on resume. However, in the cases where
that microcode comes from the early loader and the late loader hasn't
been utilized yet, there's no easy way for us to go and apply the patch
applied during boot by the early loader.
Thus, reuse the patch stashed by the early loader for the BSP.
Signed-off-by: Borislav Petkov <bp@suse.de>
Beniamino noticed a bug that an invalid DT file for the mediatek interrupt
polarity extension will cause kernel oops.
The reason is that the interrupt polarity support for mediatek chips
merely checks for NULL pointer instead of a casted error return
value in mtk_sysirq_of_init() so any other casted error value passes
the NULL pointer check and causes a kernel panic when dereferenced.
Use IS_ERR() and return the error value via PTR_ERR().
[ jac: took V2 over V3 for diff formatting, hand-added V3 changes,
tweaked subject line. ]
Reported-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Link: https://lkml.kernel.org/r/1418205302-22531-1-git-send-email-yingjoe.chen@mediatek.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The 3.19 merge window saw some TLB modifications merged which caused a
performance regression. They were fixed in commit 045bbb9fa.
Once that fix was applied, I also noticed that there was a small
but intermittent regression still present. It was not present
consistently enough to bisect reliably, but I'm fairly confident
that it came from (my own) MPX patches. The source was reading
a relatively unused field in the mm_struct via arch_unmap.
I also noted that this code was in the main instruction flow of
do_munmap() and probably had more icache impact than we want.
This patch does two things:
1. Adds a static (via Kconfig) and dynamic (via cpuid) check
for MPX with cpu_feature_enabled(). This keeps us from
reading that cacheline in the mm and trades it for a check
of the global CPUID variables at least on CPUs without MPX.
2. Adds an unlikely() to ensure that the MPX call ends up out
of the main instruction flow in do_munmap(). I've added
a detailed comment about why this was done and why we want
it even on systems where MPX is present.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: luto@amacapital.net
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20150108223021.AEEAB987@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull watchdog fixes from Wim Van Sebroeck:
"This will fix reboot issues with the imx2_wdt driver and it also drops
some forgotten owner assignments from platform_drivers"
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: drop owner assignment from platform_drivers
watchdog: imx2_wdt: Disable power down counter on boot
watchdog: imx2_wdt: Improve power management support.
Change maintainer of ibmvscsi driver to Tyrel Datwyler.
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This was inadvertently dropped from an earlier commit, otherwise
the check against cq_vector == -1 to prevent double free doesn't
make any sense.
Fixes: 2b25d981790b
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull x86 fixes from Thomas Gleixner:
"Hopefully the last round of fixes for 3.19
- regression fix for the LDT changes
- regression fix for XEN interrupt handling caused by the APIC
changes
- regression fixes for the PAT changes
- last minute fixes for new the MPX support
- regression fix for 32bit UP
- fix for a long standing relocation issue on 64bit tagged for stable
- functional fix for the Hyper-V clocksource tagged for stable
- downgrade of a pr_err which tends to confuse users
Looks a bit on the large side, but almost half of it are valuable
comments"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Change Fast TSC calibration failed from error to info
x86/apic: Re-enable PCI_MSI support for non-SMP X86_32
x86, mm: Change cachemode exports to non-gpl
x86, tls: Interpret an all-zero struct user_desc as "no segment"
x86, tls, ldt: Stop checking lm in LDT_empty
x86, mpx: Strictly enforce empty prctl() args
x86, mpx: Fix potential performance issue on unmaps
x86, mpx: Explicitly disable 32-bit MPX support on 64-bit kernels
x86, hyperv: Mark the Hyper-V clocksource as being continuous
x86: Don't rely on VMWare emulating PAT MSR correctly
x86, irq: Properly tag virtualization entry in /proc/interrupts
x86, boot: Skip relocs when load address unchanged
x86/xen: Override ACPI IRQ management callback __acpi_unregister_gsi
ACPI: pci: Do not clear pci_dev->irq in acpi_pci_irq_disable()
x86/xen: Treat SCI interrupt as normal GSI interrupt
Pull irq fixes from Thomas Gleixner:
"From the irqchip departement you get:
- regression fix for omap-intc
- regression fix for atmel-aic-common
- functional correctness fix for hip04
- type mismatch fix for gic-v3-its
- proper error pointer check for mtd-sysirq
Mostly one and two liners except for the omap regression fix which is
slightly larger than desired"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type
irqchip: omap-intc: Fix legacy DMA regression
irqchip: gic-v3-its: Fix use of max with decimal constant
irqchip: hip04: Initialize hip04_cpu_map to 0xffff
irqchip: mtk-sysirq: Use IS_ERR() instead of NULL pointer check
Many users see this message when booting without knowning that it is
of no importance and that TSC calibration may have succeeded by
another way.
As explained by Paul Bolle in
http://lkml.kernel.org/r/1348488259.1436.22.camel@x61.thuisdomein
"Fast TSC calibration failed" should not be considered as an error
since other calibration methods are being tried afterward. At most,
those send a warning if they fail (not an error). So let's change
the message from error to warning.
[ tglx: Make if pr_info. It's really not important at all ]
Fixes: c767a54ba065 x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1418106470-6906-1-git-send-email-alexandre.f.demers@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull timer fixes from Thomas Gleixner:
"A set of small fixes:
- regression fix for exynos_mct clocksource
- trivial build fix for kona clocksource
- functional one liner fix for the sh_tmu clocksource
- two validation fixes to prevent (root only) data corruption in the
kernel via settimeofday and adjtimex. Tagged for stable"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: adjtimex: Validate the ADJ_FREQUENCY values
time: settimeofday: Validate the values of tv from user
clocksource: sh_tmu: Set cpu_possible_mask to fix SMP broadcast
clocksource: kona: fix __iomem annotation
clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write
Commit 0dbc6078c06bc0 ('x86, build, pci: Fix PCI_MSI build on !SMP')
introduced the dependency that X86_UP_APIC is only available when
PCI_MSI is false. This effectively prevents PCI_MSI support on 32bit
UP systems because it disables both APIC and IO-APIC. But APIC support
is architecturally required for PCI_MSI.
The intention of the patch was to enforce APIC support when PCI_MSI is
enabled, but failed to do so.
Remove the !PCI_MSI dependency from X86_UP_APIC and enforce
X86_UP_APIC when PCI_MSI support is enabled on 32bit UP systems.
[ tglx: Massaged changelog ]
Fixes 0dbc6078c06bc0 'x86, build, pci: Fix PCI_MSI build on !SMP'
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1421967529-9037-1-git-send-email-pure.logic@nexus-software.ie
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull ARM SoC fixes from Olof Johansson:
"A week's worth of fixes for various ARM platforms. Diff wise, the
largest fix is for OMAP to deal with how GIC now registers interrupts
(irq_domain_add_legacy() -> irq_domain_add_linear() changes).
Besides this, a few more renesas platforms needed the GIC instatiation
done for legacy boards. There's also a fix that disables coherency of
mvebu due to issues, and a few other smaller fixes"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: add baud rate to Juno stdout-path
ARM: dts: imx25: Fix PWM "per" clocks
bus: mvebu-mbus: fix support of MBus window 13
Merge tag 'mvebu-fixes-3.19-3' of git://git.infradead.org/linux-mvebu into fixes
ARM: mvebu: completely disable hardware I/O coherency
ARM: OMAP: Work around hardcoded interrupts
ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds
ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds
arm: boot: dts: dra7: enable dwc3 suspend PHY quirk
Since the rework of the sparse interrupt code to actually free the
unused interrupt descriptors there exists a race between the /proc
interfaces to the irq subsystem and the code which frees the interrupt
descriptor.
CPU0 CPU1
show_interrupts()
desc = irq_to_desc(X);
free_desc(desc)
remove_from_radix_tree();
kfree(desc);
raw_spinlock_irq(&desc->lock);
/proc/interrupts is the only interface which can actively corrupt
kernel memory via the lock access. /proc/stat can only read from freed
memory. Extremly hard to trigger, but possible.
The interfaces in /proc/irq/N/ are not affected by this because the
removal of the proc file is serialized in procfs against concurrent
readers/writers. The removal happens before the descriptor is freed.
For architectures which have CONFIG_SPARSE_IRQ=n this is a non issue
as the descriptor is never freed. It's merely cleared out with the irq
descriptor lock held. So any concurrent proc access will either see
the old correct value or the cleared out ones.
Protect the lookup and access to the irq descriptor in
show_interrupts() with the sparse_irq_lock.
Provide kstat_irqs_usr() which is protecting the lookup and access
with sparse_irq_lock and switch /proc/stat to use it.
Document the existing kstat_irqs interfaces so it's clear that the
caller needs to take care about protection. The users of these
interfaces are either not affected due to SPARSE_IRQ=n or already
protected against removal.
Fixes: 1f5a5b87f78f "genirq: Implement a sane sparse_irq allocator"
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
This patch makes the bitmask for AIC_SRCTYPE consistent
with that of its valid values, and prevents the priority
field at bits 2:0 from being clobbered by an incorrect
AND with the AIC_SRCTYPE mask.
Signed-off-by: Gavin Li <gavinli@thegavinli.com>
Cc: <stable@vger.kernel.org> # v3.17+
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Link: https://lkml.kernel.org/r/1420598843-8409-1-git-send-email-gavinli@thegavinli.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Commit 281d4078bec3 ("x86: Make page cache mode a real type")
introduced the symbols __cachemode2pte_tbl and __pte2cachemode_tbl and
exported them via EXPORT_SYMBOL_GPL. The exports are part of a
replacement of code which has been EXPORT_SYMBOL before these changes
resulting in build breakage of out-of-tree non-gpl modules.
Change EXPORT_SYMBOL_GPL to EXPORT-SYMBOL for these two symbols.
Fixes: 281d4078bec3 "x86: Make page cache mode a real type"
Reported-and-tested-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/1421926997-28615-1-git-send-email-jgross@suse.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Merge "ARM: imx: fixes for 3.19, 2nd round" from Shawn Guo:
The i.MX fixes for 3.19, 2nd round:
- Correct pwm clock assignment in i.MX25 device tree to fix the broken
pwm support on i.MX25
* tag 'imx-fixes-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx25: Fix PWM "per" clocks
Signed-off-by: Olof Johansson <olof@lixom.net>
Verify that the frequency value from userspace is valid and makes sense.
Unverified values can cause overflows later on.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[jstultz: Fix up bug for negative values and drop redunent cap check]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Pull x86 microcode loading updates from Ingo Molnar:
"The main changes in this cycle are:
- Reload microcode when resuming and the case when only the early
loader has been utilized. (Borislav Petkov)
- Also, do not load the driver on paravirt guests. (Boris
Ostrovsky)"
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/intel: Fish out the stashed microcode for the BSP
x86, microcode: Reload microcode on resume
x86, microcode: Don't initialize microcode code on paravirt
x86, microcode, intel: Drop unused parameter
x86, microcode, AMD: Do not use smp_processor_id() in preemtible context
commit 55601c9f2467 (arm: omap: intc: switch over
to linear irq domain) introduced a regression with
SDMA legacy driver because that driver strictly depends
on INTC's IRQs starting at NR_IRQs. Aparently
irq_domain_add_linear() won't guarantee that, since we see
a 7 IRQs difference when booting with and without the
commit cited above.
Until arch/arm/plat-omap/dma.c is properly fixed, we
must maintain OMAP2/3 using irq_domain_add_legacy().
A FIXME note was added so people know to delete that
code once that legacy DMA driver is fixed up.
Fixes: 55601c9f2467 (arm: omap: intc: switch over to linear irq domain)
Cc: <stable@vger.kernel.org> # v3.18
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Link: https://lkml.kernel.org/r/1420576688-10604-1-git-send-email-balbi@ti.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The Witcher 2 did something like this to allocate a TLS segment index:
struct user_desc u_info;
bzero(&u_info, sizeof(u_info));
u_info.entry_number = (uint32_t)-1;
syscall(SYS_set_thread_area, &u_info);
Strictly speaking, this code was never correct. It should have set
read_exec_only and seg_not_present to 1 to indicate that it wanted
to find a free slot without putting anything there, or it should
have put something sensible in the TLS slot if it wanted to allocate
a TLS entry for real. The actual effect of this code was to
allocate a bogus segment that could be used to exploit espfix.
The set_thread_area hardening patches changed the behavior, causing
set_thread_area to return -EINVAL and crashing the game.
This changes set_thread_area to interpret this as a request to find
a free slot and to leave it empty, which isn't *quite* what the game
expects but should be close enough to keep it working. In
particular, using the code above to allocate two segments will
allocate the same segment both times.
According to FrostbittenKing on Github, this fixes The Witcher 2.
If this somehow still causes problems, we could instead allocate
a limit==0 32-bit data segment, but that seems rather ugly to me.
Fixes: 41bdc78544b8 x86/tls: Validate TLS entries to protect espfix
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: stable@vger.kernel.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/0cb251abe1ff0958b8e468a9a9a905b80ae3a746.1421954363.git.luto@amacapital.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull device mapper fixes from Mike Snitzer:
"Two stable fixes for dm-cache and one 3.19 DM core fix:
- fix potential for dm-cache metadata corruption via stale metadata
buffers being used when switching an inactive cache table to
active; this could occur due to each table having it's own bufio
client rather than sharing the client between tables.
- fix dm-cache target to properly account for discard IO while
suspending otherwise IO quiescing could complete prematurely.
- fix DM core's handling of multiple internal suspends by maintaining
an 'internal_suspend_count' and only resuming the device when this
count drops to zero"
* tag 'dm-3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix handling of multiple internal suspends
dm cache: fix problematic dual use of a single migration count variable
dm cache: share cache-metadata object across inactive and active DM tables
Without explicit command-line parameters, the Juno UART ends up running
at 57600 baud in the kernel, which is at odds with the 115200 baud used
by the rest of the firmware. Since commit 7914a7c5651a5161 now lets us
fix this by specifying default options in stdout-path, do so.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Currently PWM functionality is broken on mx25 due to the wrong assignment of the
PWM "per" clock.
According to Documentation/devicetree/bindings/clock/imx25-clock.txt:
pwm_ipg_per 52
,so update the pwm "per" to use 'pwm_ipg_per' instead of 'per10' clock.
With this change PWM can work fine on mx25.
Cc: <stable@vger.kernel.org>
Reported-by: Carlos Soto <csotoalonso@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
It makes no sense to hide the __iomem annotation from the function
that uses it, especially since it causes a sparse warning:
drivers/clocksource/bcm_kona_timer.c:118:38: warning: incorrect type in argument 1 (different address spaces)
drivers/clocksource/bcm_kona_timer.c:118:38: expected void *timer_base
drivers/clocksource/bcm_kona_timer.c:118:38: got void [noderef] <asn:2>*static [toplevel] tmr_regs
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
An unvalidated user input is multiplied by a constant, which can result in
an undefined behaviour for large values. While this is validated later,
we should avoid triggering undefined behaviour.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[jstultz: include trivial milisecond->microsecond correction noticed
by Andy]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Pull x86 vdso updates from Ingo Molnar:
"Various vDSO updates from Andy Lutomirski, mostly cleanups and
reorganization to improve maintainability, but also some
micro-optimizations and robustization changes"
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86_64/vsyscall: Restore orig_ax after vsyscall seccomp
x86_64: Add a comment explaining the TASK_SIZE_MAX guard page
x86_64,vsyscall: Make vsyscall emulation configurable
x86_64, vsyscall: Rewrite comment and clean up headers in vsyscall code
x86_64, vsyscall: Turn vsyscalls all the way off when vsyscall==none
x86,vdso: Use LSL unconditionally for vgetcpu
x86: vdso: Fix build with older gcc
x86_64/vdso: Clean up vgetcpu init and merge the vdso initcalls
x86_64/vdso: Remove jiffies from the vvar page
x86/vdso: Make the PER_CPU segment 32 bits
x86/vdso: Make the PER_CPU segment start out accessed
x86/vdso: Change the PER_CPU segment to use struct desc_struct
x86_64/vdso: Move getcpu code from vsyscall_64.c to vdso/vma.c
x86_64/vsyscall: Move all of the gate_area code to vsyscall_64.c
I'm such a moron! The simple solution of saving the BSP patch
for use on resume was too simple (and wrong!), hint:
sizeof(struct microcode_intel).
What needs to be done instead is to fish out the microcode patch
we have stashed previously and apply that on the BSP in case the
late loader hasn't been utilized.
So do that instead.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20141208110820.GB20057@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
arm64 defconfig spits out the following compiler warning from the ITS
driver:
In file included from include/linux/bitmap.h:9:0,
from drivers/irqchip/irq-gic-v3-its.c:18:
drivers/irqchip/irq-gic-v3-its.c: In function ‘its_create_device’:
include/linux/kernel.h:716:17: warning: comparison of distinct pointer types lacks a cast
(void) (&_max1 == &_max2); \
^
drivers/irqchip/irq-gic-v3-its.c:1056:12: note: in expansion of macro ‘max’
nr_ites = max(2, roundup_pow_of_two(nvecs));
Fix the warning by specifying the decimal constant `2' explicitly as an
unsigned long type.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1418825469-30529-1-git-send-email-will.deacon@arm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
32-bit programs don't have an lm bit in their ABI, so they can't
reliably cause LDT_empty to return true without resorting to memset.
They shouldn't need to do this.
This should fix a longstanding, if minor, issue in all 64-bit kernels
as well as a potential regression in the TLS hardening code.
Fixes: 41bdc78544b8 x86/tls: Validate TLS entries to protect espfix
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/72a059de55e86ad5e2935c80aa91880ddf19d07c.1421954363.git.luto@amacapital.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull two block layer fixes from Jens Axboe:
"Two small patches that should make it into 3.19:
- a fixup from me for NVMe, making the cq_vector a signed variable.
Otherwise our -1 comparison fails, and commit 2b25d981790b doesn't
do what it was supposed to.
- a fixup for the hotplug handling for blk-mq from Ming Lei, using
the proper kobject referencing to ensure we release resources at
the right time"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: fix hctx/ctx kobject use-after-free
NVMe: cq_vector should be signed
Commit ffcc393641 ("dm: enhance internal suspend and resume interface")
attempted to handle multiple internal suspends on the same device, but
it did that incorrectly. When these functions are called in this order
on the same device the device is no longer suspended, but it should be:
dm_internal_suspend_noflush
dm_internal_suspend_noflush
dm_internal_resume
Fix this bug by maintaining an 'internal_suspend_count' and resuming
the device when this count drops to zero.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
It really needs to check that src is non-directory *and* use
{un,}lock_two_nodirectories(). As it is, it's trivial to cause
double-lock (ioctl(fd, CIFS_IOC_COPYCHUNK_FILE, fd)) and if the
last argument is an fd of directory, we are asking for trouble
by violating the locking order - all directories go before all
non-directories. If the last argument is an fd of parent
directory, it has 50% odds of locking child before parent,
which will cause AB-BA deadlock if we race with unlink().
Cc: stable@vger.kernel.org @ 3.13+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge "mvebu/fixes #3" from Andrew Lunn:
mvebu fixes for 3.19. (Part 4)
bus: mvebu-mbus: fix support of MBus window 13
* tag 'mvebu-fixes-3.19-4' of git://git.infradead.org/linux-mvebu:
bus: mvebu-mbus: fix support of MBus window 13
ARM: mvebu: completely disable hardware I/O coherency
Signed-off-by: Olof Johansson <olof@lixom.net>
GPIO2_5 is the reset GPIO for the USB3317 ULPI PHY. Instead of modelling it as
a regulator, the correct approach is to use the 'reset_gpios' property of the
"usb-nop-xceiv" node.
GPIO1_7 is the reset GPIO for the USB2517 USB hub. As we currently don't have
dt bindings to describe a HUB reset, let's keep using the regulator approach.
Rename the regulator to 'reg_hub_reset' to better describe its function and bind
it with the USB host1 port instead.
USB host support has been introduced by commit 9bf206a9d13be3 ("ARM: dts:
imx51-babbage: Add USB Host1 support"), which landed in 3.16 and it seems that
USB has only been functional due to previous bootloader initialization.
With this patch applied we can get USB host to work without relying on the
bootloader.
Cc: <stable@vger.kernel.org> # 3.16+
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
EXYNOS4_MCT_L_MASK is defined as 0xffffff00, so applying this bitmask
produces a number outside the range 0x00 to 0xff, which always results
in execution of the default switch statement.
Obviously this is wrong and git history shows that the bitmask inversion
was incorrectly set during a refactoring of the MCT code.
Fix this by putting the inversion at the correct position again.
Cc: stable@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Reported-by: GP Orcullo <kinsamanka@gmail.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Pull x86 RAS update from Ingo Molnar:
"The biggest change in this cycle is better support for UCNA
(UnCorrected No Action) events:
"Handle all uncorrected error reports in the same way (soft
offline the page). We used to only do that for SRAO
(software recoverable action optional) machine checks, but
it makes sense to also do it for UCNA (UnCorrected No
Action) logs found by CMCI or polling."
plus various x86 MCE handling updates and fixes"
* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Spell "panicked" correctly
x86, mce: Support memory error recovery for both UCNA and Deferred error in machine_check_poll
x86, mce, severity: Extend the the mce_severity mechanism to handle UCNA/DEFERRED error
x86, MCE, AMD: Assign interrupt handler only when bank supports it
x86, MCE, AMD: Drop software-defined bank in error thresholding
x86, MCE, AMD: Move invariant code out from loop body
x86, MCE, AMD: Correct thresholding error logging
x86, MCE, AMD: Use macros to compute bank MSRs
RAS, HWPOISON: Fix wrong error recovery status
GHES: Make ghes_estatus_caches static
APEI, GHES: Cleanup unnecessary function for lockless list
The vsyscall emulation code sets orig_ax for seccomp's benefit,
but it forgot to set it back.
I'm not sure that this is observable at all, but it could cause
confusion to various /proc or ptrace users, and it's possible
that it could cause minor artifacts if a signal were to be
delivered on return from vsyscall emulation.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/cdc6a564517a4df09235572ee5f530ccdcf933f7.1415144089.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
HiP04 GIC extends to support 16 cores, so we should
initialize the hip04_cpu_map to 0xffff.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Link: https://lkml.kernel.org/r/1418295816-179583-1-git-send-email-long.wanglong@huawei.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Description from Michael Kerrisk. He suggested an identical patch
to one I had already coded up and tested.
commit fe3d197f8431 "x86, mpx: On-demand kernel allocation of bounds
tables" added two new prctl() operations, PR_MPX_ENABLE_MANAGEMENT and
PR_MPX_DISABLE_MANAGEMENT. However, no checks were included to ensure
that unused arguments are zero, as is done in many existing prctl()s
and as should be done for all new prctl()s. This patch adds the
required checks.
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Suggested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20150108223022.7F56FD13@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
pULL SCSI fixes from James Bottomley:
"This consists of four real fixes and three MAINTAINER updates.
Three of the fixes are obvious (the DIX and atomic allocation are bug
on and warn on fixes and the other is just trivial) and the ipr one is
a bit more involved but is required because without it, the card
double completes aborted commands and causes a kernel oops"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
MAINTAINERS: ibmvscsi driver maintainer change
MAINTAINERS: ibmvfc driver maintainer change
MAINTAINERS: Remove self as isci maintainer
scsi_debug: test always evaluates to false, || should be used instead
scsi: Avoid crashing if device uses DIX but adapter does not support it
scsi_debug: use atomic allocation in resp_rsup_opcodes
ipr: wait for aborted command responses
The kobject memory shouldn't have been freed before the kobject
is released because driver core can access it freely before its
release.
This patch frees hctx in its release callback. For ctx, they
share one single per-cpu variable which is associated with
the request queue, so free ctx in q->mq_kobj's release handler.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
(fix ctx kobjects)
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Introduce a new variable to count the number of allocated migration
structures. The existing variable cache->nr_migrations became
overloaded. It was used to:
i) track of the number of migrations in flight for the purposes of
quiescing during suspend.
ii) to estimate the amount of background IO occuring.
Recent discard changes meant that REQ_DISCARD bios are processed with
a migration. Discards are not background IO so nr_migrations was not
incremented. However this could cause quiescing to complete early.
(i) is now handled with a new variable cache->nr_allocated_migrations.
cache->nr_migrations has been renamed cache->nr_io_migrations.
cleanup_migration() is now called free_io_migration(), since it
decrements that variable.
Also, remove the unused cache->next_migration variable that got replaced
with with prealloc_structs a while ago.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Merge "Second Round of Renesas ARM Based SoC Fixes for v3.19" from Simon
Horman:
* Instantiate GIC from C board code in legacy builds on r8a7778 and r8a7779
* tag 'renesas-soc-fixes2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds
ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds
Signed-off-by: Olof Johansson <olof@lixom.net>
On Armada XP, 375 and 38x the MBus window 13 has the remap capability,
like windows 0 to 7. However, the mvebu-mbus driver isn't currently
taking into account this special case, which means that when window 13
is actually used, the remap registers are left to 0, making the device
using this MBus window unavailable.
As a minimal fix for stable, don't use window 13. A full fix will
follow later.
Fixes: fddddb52a6c ("bus: introduce an Marvell EBU MBus driver")
Cc: <stable@vger.kernel.org> # v3.10+
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
The default qspi2_clk_sel field of register CCM_CS2CDR contains '110' which is
marked as 'reserved', so we can't rely on the default value.
Provide a proper parent for QSPI clocks to avoid a kernel oops:
[ 1.037920] Division by zero in kernel.
[ 1.041807] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc7-next-20141204-00002-g5aa23e1 #2143
[ 1.050967] Hardware name: Freescale i.MX6 SoloX (Device Tree)
[ 1.056853] Backtrace:
[ 1.059360] [<80011ea0>] (dump_backtrace) from [<8001203c>] (show_stack+0x18/0x1c)
[ 1.066982] r6:00000000 r5:00000000 r4:00000000 r3:00000000
[ 1.072754] [<80012024>] (show_stack) from [<806b7100>] (dump_stack+0x88/0xa4)
[ 1.080038] [<806b7078>] (dump_stack) from [<80011d20>] (__div0+0x18/0x20)
[ 1.086958] r5:be018500 r4:be017c00
[ 1.090600] [<80011d08>] (__div0) from [<802aa418>] (Ldiv0+0x8/0x10)
[ 1.097012] [<80504fbc>] (clk_divider_set_rate) from [<80503ddc>] (clk_change_rate+0x14c/0x17c)
[ 1.105759] r7:00000000 r6:00000000 r5:be018500 r4:00000000
[ 1.111516] [<80503c90>] (clk_change_rate) from [<80503ea0>] (clk_set_rate+0x94/0x98)
[ 1.119391] r8:be7e0368 r7:00000000 r6:be11a000 r5:be018500 r4:00000000 r3:00000000
[ 1.127290] [<80503e0c>] (clk_set_rate) from [<80410558>] (fsl_qspi_probe+0x23c/0x75c)
[ 1.135260] r5:be11a010 r4:be350010
[ 1.138900] [<8041031c>] (fsl_qspi_probe) from [<80385a18>] (platform_drv_probe+0x50/0xac)
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
commit 4dbd27711cd9 "tick: export nohz tick idle symbols for module
use" was merged via the thermal tree without an explicit ack from the
relevant maintainers.
The exports are abused by the intel powerclamp driver which implements
a fake idle state from a sched FIFO task. This causes all kinds of
wreckage in the NOHZ core code which rightfully assumes that
tick_nohz_idle_enter/exit() are only called from the idle task itself.
Recent changes in the NOHZ core lead to a failure of the powerclamp
driver and now people try to hack completely broken and backwards
workarounds into the NOHZ core code. This is completely unacceptable
and just papers over the real problem. There are way more subtle
issues lurking around the corner.
The real solution is to fix the powerclamp driver by rewriting it with
a sane concept, but that's beyond the scope of this.
So the only solution for now is to remove the calls into the core NOHZ
code from the powerclamp trainwreck along with the exports.
Fixes: d6d71ee4a14a "PM: Introduce Intel PowerClamp Driver"
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Pan Jacob jun <jacob.jun.pan@intel.com>
Cc: LKP <lkp@01.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412181110110.17382@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull libata fixes from Tejun Heo:
"Three libata fixes for v3.18. Nothing too interesting. PCI ID ID and
quirk additions to ahci and an error handling path fix in sata_fsl"
* 'for-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: disable MSI on SAMSUNG 0xa800 SSD
sata_fsl: fix error handling of irq_of_parse_and_map
AHCI: Add DeviceIDs for Sunrise Point-LP SATA controller
Pull x86 mm tree changes from Ingo Molnar:
"The biggest change is full PAT support from Jürgen Gross:
The x86 architecture offers via the PAT (Page Attribute Table) a
way to specify different caching modes in page table entries. The
PAT MSR contains 8 entries each specifying one of 6 possible cache
modes. A pte references one of those entries via 3 bits:
_PAGE_PAT, _PAGE_PWT and _PAGE_PCD.
The Linux kernel currently supports only 4 different cache modes.
The PAT MSR is set up in a way that the setting of _PAGE_PAT in a
pte doesn't matter: the top 4 entries in the PAT MSR are the same
as the 4 lower entries.
This results in the kernel not supporting e.g. write-through mode.
Especially this cache mode would speed up drivers of video cards
which now have to use uncached accesses.
OTOH some old processors (Pentium) don't support PAT correctly and
the Xen hypervisor has been using a different PAT MSR configuration
for some time now and can't change that as this setting is part of
the ABI.
This patch set abstracts the cache mode from the pte and introduces
tables to translate between cache mode and pte bits (the default
cache mode "write back" is hard-wired to PAT entry 0). The tables
are statically initialized with values being compatible to old
processors and current usage. As soon as the PAT MSR is changed
(or - in case of Xen - is read at boot time) the tables are changed
accordingly. Requests of mappings with special cache modes are
always possible now, in case they are not supported there will be a
fallback to a compatible but slower mode.
Summing it up, this patch set adds the following features:
- capability to support WT and WP cache modes on processors with
full PAT support
- processors with no or uncorrect PAT support are still working as
today, even if WT or WP cache mode are selected by drivers for
some pages
- reduction of Xen special handling regarding cache mode
Another change is a boot speedup on ridiculously large RAM systems,
plus other smaller fixes"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86: mm: Move PAT only functions to mm/pat.c
xen: Support Xen pv-domains using PAT
x86: Enable PAT to use cache mode translation tables
x86: Respect PAT bit when copying pte values between large and normal pages
x86: Support PAT bit in pagetable dump for lower levels
x86: Clean up pgtable_types.h
x86: Use new cache mode type in memtype related functions
x86: Use new cache mode type in mm/ioremap.c
x86: Use new cache mode type in setting page attributes
x86: Remove looking for setting of _PAGE_PAT_LARGE in pageattr.c
x86: Use new cache mode type in track_pfn_remap() and track_pfn_insert()
x86: Use new cache mode type in mm/iomap_32.c
x86: Use new cache mode type in asm/pgtable.h
x86: Use new cache mode type in arch/x86/mm/init_64.c
x86: Use new cache mode type in arch/x86/pci
x86: Use new cache mode type in drivers/video/fbdev/vermilion
x86: Use new cache mode type in drivers/video/fbdev/gbefb.c
x86: Use new cache mode type in include/asm/fb.h
x86: Make page cache mode a real type
x86: mm: Use 2GB memory block size on large-memory x86-64 systems
...
Hand down the cpu number instead, otherwise lockdep screams when doing
echo 1 > /sys/devices/system/cpu/microcode/reload.
BUG: using smp_processor_id() in preemptible [00000000] code: amd64-microcode/2470
caller is debug_smp_processor_id+0x12/0x20
CPU: 1 PID: 2470 Comm: amd64-microcode Not tainted 3.18.0-rc6+ #26
...
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1417428741-4501-1-git-send-email-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Normally, we do reapply microcode on resume. However, in the cases where
that microcode comes from the early loader and the late loader hasn't
been utilized yet, there's no easy way for us to go and apply the patch
applied during boot by the early loader.
Thus, reuse the patch stashed by the early loader for the BSP.
Signed-off-by: Borislav Petkov <bp@suse.de>
Beniamino noticed a bug that an invalid DT file for the mediatek interrupt
polarity extension will cause kernel oops.
The reason is that the interrupt polarity support for mediatek chips
merely checks for NULL pointer instead of a casted error return
value in mtk_sysirq_of_init() so any other casted error value passes
the NULL pointer check and causes a kernel panic when dereferenced.
Use IS_ERR() and return the error value via PTR_ERR().
[ jac: took V2 over V3 for diff formatting, hand-added V3 changes,
tweaked subject line. ]
Reported-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Link: https://lkml.kernel.org/r/1418205302-22531-1-git-send-email-yingjoe.chen@mediatek.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The 3.19 merge window saw some TLB modifications merged which caused a
performance regression. They were fixed in commit 045bbb9fa.
Once that fix was applied, I also noticed that there was a small
but intermittent regression still present. It was not present
consistently enough to bisect reliably, but I'm fairly confident
that it came from (my own) MPX patches. The source was reading
a relatively unused field in the mm_struct via arch_unmap.
I also noted that this code was in the main instruction flow of
do_munmap() and probably had more icache impact than we want.
This patch does two things:
1. Adds a static (via Kconfig) and dynamic (via cpuid) check
for MPX with cpu_feature_enabled(). This keeps us from
reading that cacheline in the mm and trades it for a check
of the global CPUID variables at least on CPUs without MPX.
2. Adds an unlikely() to ensure that the MPX call ends up out
of the main instruction flow in do_munmap(). I've added
a detailed comment about why this was done and why we want
it even on systems where MPX is present.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: luto@amacapital.net
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20150108223021.AEEAB987@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull watchdog fixes from Wim Van Sebroeck:
"This will fix reboot issues with the imx2_wdt driver and it also drops
some forgotten owner assignments from platform_drivers"
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: drop owner assignment from platform_drivers
watchdog: imx2_wdt: Disable power down counter on boot
watchdog: imx2_wdt: Improve power management support.