Merge tag 'stm32-dt-for-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.4, round 1

Highlights:
----------

MPU part:
-Add FMC2 NAND controller support on stm32mp157c-ev1.
-Add M4 remoteproc support:
-Add support in stm32mp157c.dtsi.
-Declare copro reserved memories region on stm32mp157 EV1 and DK1
boards.
-Enable M4 copro support on stm32mp157 EV1 and DK1.
-Add booster for ADC on stm32mp157c.
-Add audio codec support on stm32mp157 DK1.

MCU part:
-Remove fixed regulator unit address on stm32429i-eval used by ADC.
-Add missing vdd-supply required by ADC on stm32429i-eval and
stm32h743i-eval.
-Add pwm cells on f746 and f429.

* tag 'stm32-dt-for-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (21 commits)
ARM: dts: stm32: remove useless pinctrl entries in stm32mp157-pinctrl
ARM: dts: stm32: add phy-dsi-supply property on stm32mp157c-ev1
ARM: dts: stm32: add audio codec support on stm32mp157a-dk1 board
ARM: dts: stm32: add syscfg to ADC on stm32mp157c
ARM: dts: stm32: add pwm cells to stm32f746
ARM: dts: stm32: add pwm cells to stm32f429
ARM: dts: stm32: add pwm cells to stm32mp157c
ARM: dts: stm32: fix -Wall W=1 compilation in stm32mp157 pinctrl for mcan
ARM: dts: stm32: add booster for ADC analog switches on stm32mp157c
ARM: dts: stm32: enable m4 coprocessor support on STM32MP157a-dk1
ARM: dts: stm32: declare copro reserved memories on STM32MP157a-dk1
ARM: dts: stm32: enable m4 coprocessor support on STM32MP157c-ed1
ARM: dts: stm32: declare copro reserved memories on STM32MP157c-ed1
ARM: dts: stm32: add m4 remoteproc support on STM32MP157c
ARM: dts: stm32: add missing vdda-supply to adc on stm32h743i-eval
ARM: dts: stm32: add missing vdda-supply to adc on stm32429i-eval
ARM: dts: stm32: remove fixed regulator unit address on stm32429i-eval
ARM: dts: stm32: enable FMC2 NAND controller on stm32mp157c-ev1
ARM: dts: stm32: add FMC2 NAND controller pins muxing on stm32mp157c-ev1
ARM: dts: stm32: add FMC2 NAND controller support on stm32mp157c
...

Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Arnd Bergmann <[e-mail]>

arch/arm/boot/dts/stm32429i-eval.dts

···
 		dma-ranges = <0xc0000000 0x0 0x10000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	vdda: regulator-vdda {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		reg_vref: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vref";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
+	vref: regulator-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
 	leds {
···
 &adc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&adc3_in8_pin>;
-	vref-supply = <&reg_vref>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vref>;
 	status = "okay";
 	adc3: adc@200 {
 		st,adc-channels = <8>;

arch/arm/boot/dts/stm32f429.dtsi

···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 		};
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 		};
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 		};
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 		};

arch/arm/boot/dts/stm32f746.dtsi

···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 		};
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 		};
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 		};
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 		};

arch/arm/boot/dts/stm32h743i-eval.dts

···
 };
 
 &adc_12 {
+	vdda-supply = <&vdda>;
 	vref-supply = <&vdda>;
 	status = "okay";
 	adc1: adc@0 {

arch/arm/boot/dts/stm32mp157-pinctrl.dtsi

···
 				reg = <0x0 0x400>;
 				clocks = <&rcc GPIOA>;
 				st,bank-name = "GPIOA";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 0 16>;
 				status = "disabled";
 			};
 
···
 				reg = <0x1000 0x400>;
 				clocks = <&rcc GPIOB>;
 				st,bank-name = "GPIOB";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 16 16>;
 				status = "disabled";
 			};
 
···
 				reg = <0x2000 0x400>;
 				clocks = <&rcc GPIOC>;
 				st,bank-name = "GPIOC";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 32 16>;
 				status = "disabled";
 			};
 
···
 				reg = <0x3000 0x400>;
 				clocks = <&rcc GPIOD>;
 				st,bank-name = "GPIOD";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 48 16>;
 				status = "disabled";
 			};
 
···
 				reg = <0x4000 0x400>;
 				clocks = <&rcc GPIOE>;
 				st,bank-name = "GPIOE";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 64 16>;
 				status = "disabled";
 			};
 
···
 				reg = <0x5000 0x400>;
 				clocks = <&rcc GPIOF>;
 				st,bank-name = "GPIOF";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 80 16>;
 				status = "disabled";
 			};
 
···
 				reg = <0x6000 0x400>;
 				clocks = <&rcc GPIOG>;
 				st,bank-name = "GPIOG";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 96 16>;
 				status = "disabled";
 			};
 
···
 				reg = <0x7000 0x400>;
 				clocks = <&rcc GPIOH>;
 				st,bank-name = "GPIOH";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 112 16>;
 				status = "disabled";
 			};
 
···
 				reg = <0x8000 0x400>;
 				clocks = <&rcc GPIOI>;
 				st,bank-name = "GPIOI";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 128 16>;
 				status = "disabled";
 			};
 
···
 				reg = <0x9000 0x400>;
 				clocks = <&rcc GPIOJ>;
 				st,bank-name = "GPIOJ";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 144 16>;
 				status = "disabled";
 			};
 
···
 				reg = <0xa000 0x400>;
 				clocks = <&rcc GPIOK>;
 				st,bank-name = "GPIOK";
-				ngpios = <8>;
-				gpio-ranges = <&pinctrl 0 160 8>;
 				status = "disabled";
 			};
 
···
 						 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
 						 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
 						 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+				};
+			};
+
+			fmc_pins_a: fmc-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+						 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+						 <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
+						 <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
+						 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+						 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+						 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+						 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+						 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+						 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+						 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+						 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+						 <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <1>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
+					bias-pull-up;
+				};
+			};
+
+			fmc_sleep_pins_a: fmc-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+						 <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+						 <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
+						 <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
+						 <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+						 <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+						 <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+						 <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+						 <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+						 <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+						 <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+						 <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+						 <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
+						 <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
 				};
 			};
 
···
 				};
 			};
 
-			m_can1_sleep_pins_a: m_can1-sleep@0 {
+			m_can1_sleep_pins_a: m_can1-sleep-0 {
 				pins {
 					pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
 						 <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
···
 				clocks = <&rcc GPIOZ>;
 				st,bank-name = "GPIOZ";
 				st,bank-ioport = <11>;
-				ngpios = <8>;
-				gpio-ranges = <&pinctrl_z 0 400 8>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/stm32mp157a-dk1.dts

···
 		#size-cells = <1>;
 		ranges;
 
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
 		gpu_reserved: gpu@d4000000 {
 			reg = <0xd4000000 0x4000000>;
 			no-map;
···
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "STM32MP1-DK";
+		routing =
+			"Playback" , "MCLK",
+			"Capture" , "MCLK",
+			"MICL" , "Mic Bias";
+		dais = <&sai2a_port &sai2b_port>;
+		status = "okay";
 	};
 };
 
···
 				sii9022_in: endpoint {
 					remote-endpoint = <&ltdc_ep0_out>;
 				};
+			};
+		};
+	};
+
+	cs42l51: cs42l51@4a {
+		compatible = "cirrus,cs42l51";
+		reg = <0x4a>;
+		#sound-dai-cells = <0>;
+		VL-supply = <&v3v3>;
+		VD-supply = <&v1v8_audio>;
+		VA-supply = <&v1v8_audio>;
+		VAHP-supply = <&v1v8_audio>;
+		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+		clocks = <&sai2a>;
+		clock-names = "MCLK";
+		status = "okay";
+
+		cs42l51_port: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cs42l51_tx_endpoint: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&sai2a_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+
+			cs42l51_rx_endpoint: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&sai2b_endpoint>;
+				frame-master;
+				bitclock-master;
 			};
 		};
 	};
···
 	};
 };
 
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
 &rng1 {
 	status = "okay";
 };
 
 &rtc {
 	status = "okay";
+};
+
+&sai2 {
+	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
+	pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
+	status = "okay";
+
+	sai2a: audio-controller@4400b004 {
+		#clock-cells = <0>;
+		dma-names = "tx";
+		clocks = <&rcc SAI2_K>;
+		clock-names = "sai_ck";
+		status = "okay";
+
+		sai2a_port: port {
+			sai2a_endpoint: endpoint {
+				remote-endpoint = <&cs42l51_tx_endpoint>;
+				format = "i2s";
+				mclk-fs = <256>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <32>;
+			};
+		};
+	};
+
+	sai2b: audio-controller@4400b024 {
+		dma-names = "rx";
+		st,sync = <&sai2a 2>;
+		clocks = <&rcc SAI2_K>, <&sai2a>;
+		clock-names = "sai_ck", "MCLK";
+		status = "okay";
+
+		sai2b_port: port {
+			sai2b_endpoint: endpoint {
+				remote-endpoint = <&cs42l51_rx_endpoint>;
+				format = "i2s";
+				mclk-fs = <256>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <32>;
+			};
+		};
+	};
 };
 
 &sdmmc1 {

arch/arm/boot/dts/stm32mp157c-ed1.dts

···
 		#size-cells = <1>;
 		ranges;
 
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
 		gpu_reserved: gpu@e8000000 {
 			reg = <0xe8000000 0x8000000>;
 			no-map;
···
 
 &iwdg2 {
 	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
 	status = "okay";
 };
 

arch/arm/boot/dts/stm32mp157c-ev1.dts

···
 &dsi {
 	#address-cells = <1>;
 	#size-cells = <0>;
+	phy-dsi-supply = <&reg18>;
 	status = "okay";
 
 	ports {
···
 		phy0: ethernet-phy@0 {
 			reg = <0>;
 		};
+	};
+};
+
+&fmc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&fmc_pins_a>;
+	pinctrl-1 = <&fmc_sleep_pins_a>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nand@0 {
+		reg = <0>;
+		nand-on-flash-bbt;
+		#address-cells = <1>;
+		#size-cells = <1>;
 	};
 };
 

arch/arm/boot/dts/stm32mp157c.dtsi

···
 		};
 	};
 
+	booster: regulator-booster {
+		compatible = "st,stm32mp1-booster";
+		st,syscfg = <&syscfg>;
+		status = "disabled";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 			timer@15 {
···
 
 			pwm {
 				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
···
 			clocks = <&rcc ADC12>, <&rcc ADC12_K>;
 			clock-names = "bus", "adc";
 			interrupt-controller;
+			st,syscfg = <&syscfg>;
 			#interrupt-cells = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
···
 			dma-requests = <48>;
 		};
 
+		fmc: nand-controller@58002000 {
+			compatible = "st,stm32mp15-fmc2";
+			reg = <0x58002000 0x1000>,
+			      <0x80000000 0x1000>,
+			      <0x88010000 0x1000>,
+			      <0x88020000 0x1000>,
+			      <0x81000000 0x1000>,
+			      <0x89010000 0x1000>,
+			      <0x89020000 0x1000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&mdma1 20 0x10 0x12000a02 0x0 0x0>,
+			       <&mdma1 20 0x10 0x12000a08 0x0 0x0>,
+			       <&mdma1 21 0x10 0x12000a0a 0x0 0x0>;
+			dma-names = "tx", "rx", "ecc";
+			clocks = <&rcc FMC_K>;
+			resets = <&rcc FMC_R>;
+			status = "disabled";
+		};
+
 		qspi: spi@58003000 {
 			compatible = "st,stm32f469-qspi";
 			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
 			reg-names = "qspi", "qspi_mm";
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
+			       <&mdma1 22 0x10 0x100008 0x0 0x0>;
+			dma-names = "tx", "rx";
 			clocks = <&rcc QSPI_K>;
 			resets = <&rcc QSPI_R>;
 			status = "disabled";
···
 			resets = <&rcc I2C6_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	mlahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-ranges = <0x00000000 0x38000000 0x10000>,
+			     <0x10000000 0x10000000 0x60000>,
+			     <0x30000000 0x30000000 0x60000>;
+
+		m4_rproc: m4@10000000 {
+			compatible = "st,stm32mp1-m4";
+			reg = <0x10000000 0x40000>,
+			      <0x30000000 0x40000>,
+			      <0x38000000 0x10000>;
+			resets = <&rcc MCU_R>;
+			st,syscfg-holdboot = <&rcc 0x10C 0x1>;
+			st,syscfg-tz = <&rcc 0x000 0x1>;
 			status = "disabled";
 		};
 	};