tjh.dev / kernel
Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
fork atom

ARM: dts: at91: correct gpio-keys properties

gpio-keys children do not use unit addresses.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220616005333.18491-39-krzysztof.kozlowski@linaro.org

Krzysztof Kozlowski fa8cc83a 17413b15

+3 -18
-2
arch/arm/boot/dts/at91-kizbox.dts
··· 30 30 31 31 gpio-keys { 32 32 compatible = "gpio-keys"; 33 - #address-cells = <1>; 34 - #size-cells = <0>; 35 33 36 34 button-reset { 37 35 label = "PB_RST";
-2
arch/arm/boot/dts/at91-kizbox2-common.dtsi
··· 33 33 34 34 gpio-keys { 35 35 compatible = "gpio-keys"; 36 - #address-cells = <1>; 37 - #size-cells = <0>; 38 36 39 37 button-prog { 40 38 label = "PB_PROG";
-2
arch/arm/boot/dts/at91-kizboxmini-common.dtsi
··· 36 36 37 37 gpio_keys { 38 38 compatible = "gpio-keys"; 39 - #address-cells = <1>; 40 - #size-cells = <0>; 41 39 42 40 key-prog { 43 41 label = "PB_PROG";
-2
arch/arm/boot/dts/at91-qil_a9260.dts
··· 198 198 199 199 gpio_keys { 200 200 compatible = "gpio-keys"; 201 - #address-cells = <1>; 202 - #size-cells = <0>; 203 201 204 202 button-user { 205 203 label = "user_pb";
+1 -4
arch/arm/boot/dts/at91-wb45n.dts
··· 14 14 15 15 gpio-keys { 16 16 compatible = "gpio-keys"; 17 - #address-cells = <1>; 18 - #size-cells = <0>; 19 17 20 - irqbtn@18 { 21 - reg = <18>; 18 + button { 22 19 label = "IRQBTN"; 23 20 linux,code = <99>; 24 21 gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+2 -6
arch/arm/boot/dts/at91-wb50n.dts
··· 15 15 16 16 gpio-keys { 17 17 compatible = "gpio-keys"; 18 - #address-cells = <1>; 19 - #size-cells = <0>; 20 18 21 - btn0@10 { 22 - reg = <10>; 19 + button-0 { 23 20 label = "BTNESC"; 24 21 linux,code = <1>; /* ESC button */ 25 22 gpios = <&pioA 10 GPIO_ACTIVE_LOW>; 26 23 wakeup-source; 27 24 }; 28 25 29 - irqbtn@31 { 30 - reg = <31>; 26 + button-1 { 31 27 label = "IRQBTN"; 32 28 linux,code = <99>; /* SysReq button */ 33 29 gpios = <&pioE 31 GPIO_ACTIVE_LOW>;