Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
"First round of updates for the input subsystem.

You will get a new touchsreen driver for Cypress 4th generation
devices, a driver for a special controller implementing PS/2 protocol
in OLPC devices, and a driver for power key for SiRFprimaII PWRC.

HID and bcm5497 now support for the 2013 MacBook Air.

EVIOCGKEY and the rest of evdev ioctls now flush events of matching
type from the client's event queue so that clients can be sure any
events received after issuing EVIOCG* ioctl are new events.

And a host of cleanups and improvements in other drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits)
Input: cyttsp4 - kfree xfer_buf on error path in probe()
Input: tps6507x-ts - select INPUT_POLLDEV
Input: bcm5974 - add support for the 2013 MacBook Air
HID: apple: Add support for the 2013 Macbook Air
Input: cyttsp4 - leak on error path in probe()
Input: cyttsp4 - silence NULL dereference warning
Input: cyttsp4 - silence shift wrap warning
Input: tps6507x-ts - convert to polled input device infrastructure
ARM: davinci: da850-evm: remove vref from touchscreen platform data
Input: cyttsp4 - SPI driver for Cypress TMA4XX touchscreen devices
Input: cyttsp4 - I2C driver for Cypress TMA4XX touchscreen devices
Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices
Input: cyttsp - I2C driver split into two modules
Input: add OLPC AP-SP driver
Input: nspire-keypad - remove redundant dev_err call in nspire_keypad_probe()
Input: tps6507x-ts - remove vref from platform data
Input: tps6507x-ts - use bool for booleans
Input: tps6507x-ts - remove bogus unreachable code
Input: samsung-keypad - let device core setup the default pin configuration
Input: wacom_i2c - implement hovering capability
...

Documentation/devicetree/bindings/input/pxa27x-keypad.txt

···
+* Marvell PXA Keypad controller
+
+Required Properties
+- compatible : should be "marvell,pxa27x-keypad"
+- reg : Address and length of the register set for the device
+- interrupts : The interrupt for the keypad controller
+- marvell,debounce-interval : How long time the key will be
+  recognized when it is pressed. It is a u32 value, and bit[31:16]
+  is debounce interval for direct key and bit[15:0] is debounce
+  interval for matrix key. The value is in binary number of 2ms
+
+Optional Properties For Matrix Keyes
+Please refer to matrix-keymap.txt
+
+Optional Properties for Direct Keyes
+- marvell,direct-key-count : How many direct keyes are used.
+- marvell,direct-key-mask : The mask indicates which keyes
+  are used. If bit[X] of the mask is set, the direct key X
+  is used.
+- marvell,direct-key-low-active : Direct key status register
+  tells the level of pins that connects to the direct keyes.
+  When this property is set, it means that when the pin level
+  is low, the key is pressed(active).
+- marvell,direct-key-map : It is a u16 array. Each item indicates
+  the linux key-code for the direct key.
+
+Optional Properties For Rotary
+- marvell,rotary0 : It is a u32 value. Bit[31:16] is the
+  linux key-code for rotary up. Bit[15:0] is the linux key-code
+  for rotary down. It is for rotary 0.
+- marvell,rotary1 : Same as marvell,rotary0. It is for rotary 1.
+- marvell,rotary-rel-key : When rotary is used for relative axes
+  in the device, the value indicates the key-code for relative
+  axes measurement in the device. It is a u32 value. Bit[31:16]
+  is for rotary 1, and Bit[15:0] is for rotary 0.
+
+Examples:
+	keypad: keypad@d4012000 {
+		keypad,num-rows = <3>;
+		keypad,num-columns = <5>;
+		linux,keymap = <0x0000000e	/* KEY_BACKSPACE */
+				0x0001006b	/* KEY_END */
+				0x00020061	/* KEY_RIGHTCTRL */
+				0x0003000b	/* KEY_0 */
+				0x00040002	/* KEY_1 */
+				0x0100008b	/* KEY_MENU */
+				0x01010066	/* KEY_HOME */
+				0x010200e7	/* KEY_SEND */
+				0x01030009	/* KEY_8 */
+				0x0104000a	/* KEY_9 */
+				0x02000160	/* KEY_OK */
+				0x02010003	/* KEY_2 */
+				0x02020004	/* KEY_3 */
+				0x02030005	/* KEY_4 */
+				0x02040006>;	/* KEY_5 */
+		marvell,rotary0 = <0x006c0067>;	/* KEY_UP & KEY_DOWN */
+		marvell,direct-key-count = <1>;
+		marvell,direct-key-map = <0x001c>;
+		marvell,debounce-interval = <0x001e001e>;
+	};

Documentation/devicetree/bindings/input/samsung-keypad.txt

···
 - samsung,keypad-num-columns: Number of column lines connected to the
   keypad controller.
 
-- row-gpios: List of gpios used as row lines. The gpio specifier for
-  this property depends on the gpio controller to which these row lines
-  are connected.
-
-- col-gpios: List of gpios used as column lines. The gpio specifier for
-  this property depends on the gpio controller to which these column
-  lines are connected.
-
 - Keys represented as child nodes: Each key connected to the keypad
   controller is represented as a child node to the keypad controller
   device node and should include the following properties.
···
   - keypad,column: the column number to which the key is connected.
   - linux,code: the key-code to be reported when the key is pressed
     and released.
+
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
 
 Optional Properties specific to linux:
 - linux,keypad-no-autorepeat: do no enable autorepeat feature.
···
 		linux,input-no-autorepeat;
 		linux,input-wakeup;
 
-		row-gpios = <&gpx2 0 3 3 0
-			     &gpx2 1 3 3 0>;
-
-		col-gpios = <&gpx1 0 3 0 0
-			     &gpx1 1 3 0 0
-			     &gpx1 2 3 0 0
-			     &gpx1 3 3 0 0
-			     &gpx1 4 3 0 0
-			     &gpx1 5 3 0 0
-			     &gpx1 6 3 0 0
-			     &gpx1 7 3 0 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&keypad_rows &keypad_columns>;
 
 		key_1 {
 			keypad,row = <0>;

Documentation/devicetree/bindings/input/ti,nspire-keypad.txt

···
+TI-NSPIRE Keypad
+
+Required properties:
+- compatible: Compatible property value should be "ti,nspire-keypad".
+
+- reg: Physical base address of the peripheral and length of memory mapped
+  region.
+
+- interrupts: The interrupt number for the peripheral.
+
+- scan-interval: How often to scan in us. Based on a APB speed of 33MHz, the
+	maximum and minimum delay time is ~2000us and ~500us respectively
+
+- row-delay: How long to wait before scanning each row.
+
+- clocks: The clock this peripheral is attached to.
+
+- linux,keymap: The keymap to use
+	(see Documentation/devicetree/bindings/input/matrix-keymap.txt)
+
+Optional properties:
+- active-low: Specify that the keypad is active low (i.e. logical low signifies
+	a key press).
+
+Example:
+
+input {
+	compatible = "ti,nspire-keypad";
+	reg = <0x900E0000 0x1000>;
+	interrupts = <16>;
+
+	scan-interval = <1000>;
+	row-delay = <200>;
+
+	clocks = <&apb_pclk>;
+
+	linux,keymap = <
+	0x0000001c	0x0001001c	0x00040039
+	0x0005002c	0x00060015	0x0007000b
+	0x0008000f	0x0100002d	0x01010011
+	0x0102002f	0x01030004	0x01040016
+	0x01050014	0x0106001f	0x01070002
+	0x010a006a	0x02000013	0x02010010
+	0x02020019	0x02030007	0x02040018
+	0x02050031	0x02060032	0x02070005
+	0x02080028	0x0209006c	0x03000026
+	0x03010025	0x03020024	0x0303000a
+	0x03040017	0x03050023	0x03060022
+	0x03070008	0x03080035	0x03090069
+	0x04000021	0x04010012	0x04020020
+	0x0404002e	0x04050030	0x0406001e
+	0x0407000d	0x04080037	0x04090067
+	0x05010038	0x0502000c	0x0503001b
+	0x05040034	0x0505001a	0x05060006
+	0x05080027	0x0509000e	0x050a006f
+	0x0600002b	0x0602004e	0x06030068
+	0x06040003	0x0605006d	0x06060009
+	0x06070001	0x0609000f	0x0708002a
+	0x0709001d	0x070a0033	>;
+};

Documentation/devicetree/bindings/serio/olpc,ap-sp.txt

···
+OLPC AP-SP serio interface
+
+Required properties:
+- compatible : "olpc,ap-sp"
+- reg : base address and length of SoC's WTM registers
+- interrupts : SP-AP interrupt
+
+Example:
+	ap-sp@d4290000 {
+		compatible = "olpc,ap-sp";
+		reg = <0xd4290000 0x1000>;
+		interrupts = <40>;
+	}

Documentation/input/multi-touch-protocol.txt

···
 by noting that the largest supported BTN_TOOL_*TAP event is larger than the
 total number of type B slots reported in the absinfo for the ABS_MT_SLOT axis.
 
+The minimum value of the ABS_MT_SLOT axis must be 0.
+
 Protocol Example A
 ------------------
 

arch/arm/mach-davinci/board-da850-evm.c

···
 static struct touchscreen_init_data tps6507x_touchscreen_data = {
 	.poll_period =  30,	/* ms between touch samples */
 	.min_pressure = 0x30,	/* minimum pressure to trigger touch */
-	.vref = 0,		/* turn off vref when not using A/D */
 	.vendor = 0,		/* /sys/class/input/input?/id/vendor */
 	.product = 65070,	/* /sys/class/input/input?/id/product */
 	.version = 0x100,	/* /sys/class/input/input?/id/version */

arch/arm/mach-mmp/aspenite.c

···
 	.invert_pixclock	= 0,
 };
 
-static unsigned int aspenite_matrix_key_map[] = {
+static const unsigned int aspenite_matrix_key_map[] = {
 	KEY(0, 6, KEY_UP),	/* SW 4 */
 	KEY(0, 7, KEY_DOWN),	/* SW 5 */
 	KEY(1, 6, KEY_LEFT),	/* SW 6 */
···
 	KEY(4, 7, KEY_ESC),	/* SW 9 */
 };
 
+static struct matrix_keymap_data aspenite_matrix_keymap_data = {
+	.keymap			= aspenite_matrix_key_map,
+	.keymap_size		= ARRAY_SIZE(aspenite_matrix_key_map),
+};
+
 static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
 	.matrix_key_rows	= 5,
 	.matrix_key_cols	= 8,
-	.matrix_key_map		= aspenite_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(aspenite_matrix_key_map),
+	.matrix_keymap_data	= &aspenite_matrix_keymap_data,
 	.debounce_interval	= 30,
 };
 

arch/arm/mach-mmp/teton_bga.c

···
 	KEY(1, 7, KEY_RIGHT),
 };
 
+static struct matrix_keymap_data teton_bga_matrix_keymap_data = {
+	.keymap			= teton_bga_matrix_key_map,
+	.keymap_size		= ARRAY_SIZE(teton_bga_matrix_key_map),
+};
+
 static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = {
 	.matrix_key_rows        = 2,
 	.matrix_key_cols        = 8,
-	.matrix_key_map         = teton_bga_matrix_key_map,
-	.matrix_key_map_size    = ARRAY_SIZE(teton_bga_matrix_key_map),
+	.matrix_keymap_data	= &teton_bga_matrix_keymap_data,
 	.debounce_interval      = 30,
 };
 

arch/arm/mach-pxa/em-x270.c

···
 #endif
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int em_x270_module_matrix_keys[] = {
+static const unsigned int em_x270_module_matrix_keys[] = {
 	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
 	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
 	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
+
+static struct matrix_keymap_data em_x270_matrix_keymap_data = {
+	.keymap			= em_x270_module_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(em_x270_module_matrix_keys),
 };
 
 struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
 	/* code map for the matrix keys */
 	.matrix_key_rows	= 3,
 	.matrix_key_cols	= 3,
-	.matrix_key_map		= em_x270_module_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(em_x270_module_matrix_keys),
+	.matrix_keymap_data	= &em_x270_matrix_keymap_data,
 };
 
-static unsigned int em_x270_exeda_matrix_keys[] = {
+static const unsigned int em_x270_exeda_matrix_keys[] = {
 	KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
 	KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
 	KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
···
 	KEY(7, 6, 0), KEY(7, 7, 0),
 };
 
+static struct matrix_keymap_data em_x270_exeda_matrix_keymap_data = {
+	.keymap			= em_x270_exeda_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(em_x270_exeda_matrix_keys),
+};
+
 struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
 	/* code map for the matrix keys */
 	.matrix_key_rows	= 8,
 	.matrix_key_cols	= 8,
-	.matrix_key_map		= em_x270_exeda_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(em_x270_exeda_matrix_keys),
+	.matrix_keymap_data	= &em_x270_exeda_matrix_keymap_data,
 };
 
 static void __init em_x270_init_keypad(void)

arch/arm/mach-pxa/ezx.c

···
 
 /* KEYPAD */
 #ifdef CONFIG_MACH_EZX_A780
-static unsigned int a780_key_map[] = {
+static const unsigned int a780_key_map[] = {
 	KEY(0, 0, KEY_SEND),
 	KEY(0, 1, KEY_BACK),
 	KEY(0, 2, KEY_END),
···
 	KEY(4, 4, KEY_DOWN),
 };
 
+static struct matrix_keymap_data a780_matrix_keymap_data = {
+	.keymap			= a780_key_map,
+	.keymap_size		= ARRAY_SIZE(a780_key_map),
+};
+
 static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
 	.matrix_key_rows = 5,
 	.matrix_key_cols = 5,
-	.matrix_key_map = a780_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(a780_key_map),
+	.matrix_keymap_data = &a780_matrix_keymap_data,
 
 	.direct_key_map = { KEY_CAMERA },
 	.direct_key_num = 1,
···
 #endif /* CONFIG_MACH_EZX_A780 */
 
 #ifdef CONFIG_MACH_EZX_E680
-static unsigned int e680_key_map[] = {
+static const unsigned int e680_key_map[] = {
 	KEY(0, 0, KEY_UP),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_RESERVED),
···
 	KEY(2, 3, KEY_KPENTER),
 };
 
+static struct matrix_keymap_data e680_matrix_keymap_data = {
+	.keymap			= e680_key_map,
+	.keymap_size		= ARRAY_SIZE(e680_key_map),
+};
+
 static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
 	.matrix_key_rows = 3,
 	.matrix_key_cols = 4,
-	.matrix_key_map = e680_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(e680_key_map),
+	.matrix_keymap_data = &e680_matrix_keymap_data,
 
 	.direct_key_map = {
 		KEY_CAMERA,
···
 #endif /* CONFIG_MACH_EZX_E680 */
 
 #ifdef CONFIG_MACH_EZX_A1200
-static unsigned int a1200_key_map[] = {
+static const unsigned int a1200_key_map[] = {
 	KEY(0, 0, KEY_RESERVED),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_PAGEDOWN),
···
 	KEY(4, 5, KEY_RESERVED),
 };
 
+static struct matrix_keymap_data a1200_matrix_keymap_data = {
+	.keymap			= a1200_key_map,
+	.keymap_size		= ARRAY_SIZE(a1200_key_map),
+};
+
 static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
 	.matrix_key_rows = 5,
 	.matrix_key_cols = 6,
-	.matrix_key_map = a1200_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(a1200_key_map),
+	.matrix_keymap_data = &a1200_matrix_keymap_data,
 
 	.debounce_interval = 30,
 };
 #endif /* CONFIG_MACH_EZX_A1200 */
 
 #ifdef CONFIG_MACH_EZX_E6
-static unsigned int e6_key_map[] = {
+static const unsigned int e6_key_map[] = {
 	KEY(0, 0, KEY_RESERVED),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_PAGEDOWN),
···
 	KEY(4, 5, KEY_PREVIOUSSONG),
 };
 
+static struct matrix_keymap_data e6_keymap_data = {
+	.keymap			= e6_key_map,
+	.keymap_size		= ARRAY_SIZE(e6_key_map),
+};
+
 static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
 	.matrix_key_rows = 5,
 	.matrix_key_cols = 6,
-	.matrix_key_map = e6_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(e6_key_map),
+	.matrix_keymap_data = &e6_keymap_data,
 
 	.debounce_interval = 30,
 };
 #endif /* CONFIG_MACH_EZX_E6 */
 
 #ifdef CONFIG_MACH_EZX_A910
-static unsigned int a910_key_map[] = {
+static const unsigned int a910_key_map[] = {
 	KEY(0, 0, KEY_NUMERIC_6),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_PAGEDOWN),
···
 	KEY(4, 5, KEY_RESERVED),
 };
 
+static struct matrix_keymap_data a910_matrix_keymap_data = {
+	.keymap			= a910_key_map,
+	.keymap_size		= ARRAY_SIZE(a910_key_map),
+};
+
 static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
 	.matrix_key_rows = 5,
 	.matrix_key_cols = 6,
-	.matrix_key_map = a910_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(a910_key_map),
+	.matrix_keymap_data = &a910_matrix_keymap_data,
 
 	.debounce_interval = 30,
 };
 #endif /* CONFIG_MACH_EZX_A910 */
 
 #ifdef CONFIG_MACH_EZX_E2
-static unsigned int e2_key_map[] = {
+static const unsigned int e2_key_map[] = {
 	KEY(0, 0, KEY_NUMERIC_6),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_NUMERIC_9),
···
 	KEY(4, 5, KEY_RESERVED),
 };
 
+static struct matrix_keymap_data e2_matrix_keymap_data = {
+	.keymap			= e2_key_map,
+	.keymap_size		= ARRAY_SIZE(e2_key_map),
+};
+
 static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
 	.matrix_key_rows = 5,
 	.matrix_key_cols = 6,
-	.matrix_key_map = e2_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(e2_key_map),
+	.matrix_keymap_data = &e2_matrix_keymap_data,
 
 	.debounce_interval = 30,
 };

arch/arm/mach-pxa/littleton.c

···
 #endif
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int littleton_matrix_key_map[] = {
+static const unsigned int littleton_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
 	KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
···
 	KEY(3, 1, KEY_F23),	/* soft2 */
 };
 
+static struct matrix_keymap_data littleton_matrix_keymap_data = {
+	.keymap			= littleton_matrix_key_map,
+	.keymap_size		= ARRAY_SIZE(littleton_matrix_key_map),
+};
+
 static struct pxa27x_keypad_platform_data littleton_keypad_info = {
 	.matrix_key_rows	= 6,
 	.matrix_key_cols	= 5,
-	.matrix_key_map		= littleton_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(littleton_matrix_key_map),
+	.matrix_keymap_data	= &littleton_matrix_keymap_data,
 
 	.enable_rotary0		= 1,
 	.rotary0_up_key		= KEY_UP,

arch/arm/mach-pxa/mainstone.c

···
 };
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int mainstone_matrix_keys[] = {
+static const unsigned int mainstone_matrix_keys[] = {
 	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
 	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
 	KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I),
···
 	KEY(4, 6, KEY_SELECT),
 };
 
+static struct matrix_keymap_data mainstone_matrix_keymap_data = {
+	.keymap			= mainstone_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(mainstone_matrix_keys),
+};
+
 struct pxa27x_keypad_platform_data mainstone_keypad_info = {
 	.matrix_key_rows	= 6,
 	.matrix_key_cols	= 7,
-	.matrix_key_map		= mainstone_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(mainstone_matrix_keys),
+	.matrix_keymap_data	= &mainstone_matrix_keymap_data,
 
 	.enable_rotary0		= 1,
 	.rotary0_up_key		= KEY_UP,

arch/arm/mach-pxa/mioa701.c

···
 /*
  * Keyboard configuration
  */
-static unsigned int mioa701_matrix_keys[] = {
+static const unsigned int mioa701_matrix_keys[] = {
 	KEY(0, 0, KEY_UP),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_MEDIA),
···
 	KEY(2, 1, KEY_PHONE),	/* Phone Green key */
 	KEY(2, 2, KEY_CAMERA)	/* Camera key */
 };
+
+static struct matrix_keymap_data mioa701_matrix_keymap_data = {
+	.keymap			= mioa701_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(mioa701_matrix_keys),
+};
+
 static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
 	.matrix_key_rows = 3,
 	.matrix_key_cols = 3,
-	.matrix_key_map = mioa701_matrix_keys,
-	.matrix_key_map_size = ARRAY_SIZE(mioa701_matrix_keys),
+	.matrix_keymap_data = &mioa701_matrix_keymap_data,
 };
 
 /*

arch/arm/mach-pxa/palmld.c

···
  * GPIO keyboard
  ******************************************************************************/
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmld_matrix_keys[] = {
+static const unsigned int palmld_matrix_keys[] = {
 	KEY(0, 1, KEY_F2),
 	KEY(0, 2, KEY_UP),
 
···
 	KEY(3, 2, KEY_LEFT),
 };
 
+static struct matrix_keymap_data palmld_matrix_keymap_data = {
+	.keymap			= palmld_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(palmld_matrix_keys),
+};
+
 static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
 	.matrix_key_rows	= 4,
 	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmld_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmld_matrix_keys),
+	.matrix_keymap_data	= &palmld_matrix_keymap_data,
 
 	.debounce_interval	= 30,
 };

arch/arm/mach-pxa/palmt5.c

···
  * GPIO keyboard
  ******************************************************************************/
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmt5_matrix_keys[] = {
+static const unsigned int palmt5_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
 	KEY(0, 2, KEY_ENTER),
···
 	KEY(3, 2, KEY_LEFT),
 };
 
+static struct matrix_keymap_data palmt5_matrix_keymap_data = {
+	.keymap			= palmt5_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(palmt5_matrix_keys),
+};
+
 static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
 	.matrix_key_rows	= 4,
 	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmt5_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmt5_matrix_keys),
+	.matrix_keymap_data	= &palmt5_matrix_keymap_data,
 
 	.debounce_interval	= 30,
 };

arch/arm/mach-pxa/palmtreo.c

···
  * GPIO keyboard
  ******************************************************************************/
 #if IS_ENABLED(CONFIG_KEYBOARD_PXA27x)
-static unsigned int treo680_matrix_keys[] = {
+static const unsigned int treo680_matrix_keys[] = {
 	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
 	KEY(0, 1, KEY_LEFT),
 	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
···
 	KEY(7, 5, KEY_I),
 };
 
-static unsigned int centro_matrix_keys[] = {
+static const unsigned int centro_matrix_keys[] = {
 	KEY(0, 0, KEY_F9),		/* Home */
 	KEY(0, 1, KEY_LEFT),
 	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
···
 	KEY(7, 5, KEY_I),
 };
 
+static struct matrix_keymap_data treo680_matrix_keymap_data = {
+	.keymap			= treo680_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(treo680_matrix_keys),
+};
+
+static struct matrix_keymap_data centro_matrix_keymap_data = {
+	.keymap			= centro_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(centro_matrix_keys),
+};
+
 static struct pxa27x_keypad_platform_data treo680_keypad_pdata = {
 	.matrix_key_rows	= 8,
 	.matrix_key_cols	= 7,
-	.matrix_key_map		= treo680_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(treo680_matrix_keys),
+	.matrix_keymap_data	= &treo680_matrix_keymap_data,
 	.direct_key_map		= { KEY_CONNECT },
 	.direct_key_num		= 1,
 
···
 {
 	static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata;
 
-	if (machine_is_centro()) {
-		data->matrix_key_map = centro_matrix_keys;
-		data->matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys);
-	}
+	if (machine_is_centro())
+		data->matrix_keymap_data = &centro_matrix_keymap_data;
 
 	pxa_set_keypad_info(&treo680_keypad_pdata);
 }

arch/arm/mach-pxa/palmtx.c

···
  * GPIO keyboard
  ******************************************************************************/
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmtx_matrix_keys[] = {
+static const unsigned int palmtx_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
 	KEY(0, 2, KEY_ENTER),
···
 	KEY(3, 2, KEY_LEFT),
 };
 
+static struct matrix_keymap_data palmtx_matrix_keymap_data = {
+	.keymap			= palmtx_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(palmtx_matrix_keys),
+};
+
 static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
 	.matrix_key_rows	= 4,
 	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmtx_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmtx_matrix_keys),
+	.matrix_keymap_data	= &palmtx_matrix_keymap_data,
 
 	.debounce_interval	= 30,
 };

arch/arm/mach-pxa/palmz72.c

···
  * GPIO keyboard
  ******************************************************************************/
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmz72_matrix_keys[] = {
+static const unsigned int palmz72_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
 	KEY(0, 2, KEY_ENTER),
···
 	KEY(3, 2, KEY_LEFT),
 };
 
+static struct matrix_keymap_data almz72_matrix_keymap_data = {
+	.keymap			= palmz72_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(palmz72_matrix_keys),
+};
+
 static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
 	.matrix_key_rows	= 4,
 	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmz72_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmz72_matrix_keys),
+	.matrix_keymap_data	= &almz72_matrix_keymap_data,
 
 	.debounce_interval	= 30,
 };

arch/arm/mach-pxa/tavorevb.c

···
 };
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int tavorevb_matrix_key_map[] = {
+static const unsigned int tavorevb_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(0, 4, KEY_A), KEY(0, 5, KEY_B), KEY(0, 6, KEY_C),
 	KEY(1, 4, KEY_E), KEY(1, 5, KEY_F), KEY(1, 6, KEY_G),
···
 	KEY(3, 3, KEY_F23),	/* soft2 */
 };
 
+static struct matrix_keymap_data tavorevb_matrix_keymap_data = {
+	.keymap		= tavorevb_matrix_key_map,
+	.keymap_size	= ARRAY_SIZE(tavorevb_matrix_key_map),
+};
+
 static struct pxa27x_keypad_platform_data tavorevb_keypad_info = {
 	.matrix_key_rows	= 7,
 	.matrix_key_cols	= 7,
-	.matrix_key_map		= tavorevb_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(tavorevb_matrix_key_map),
+	.matrix_keymap_data	= &tavorevb_matrix_keymap_data,
 	.debounce_interval	= 30,
 };
 

arch/arm/mach-pxa/z2.c

···
  * GPIO keyboard
  ******************************************************************************/
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int z2_matrix_keys[] = {
+static const unsigned int z2_matrix_keys[] = {
 	KEY(0, 0, KEY_OPTION),
 	KEY(1, 0, KEY_UP),
 	KEY(2, 0, KEY_DOWN),
···
 	KEY(5, 7, KEY_DOT),
 };
 
+static struct matrix_keymap_data z2_matrix_keymap_data = {
+	.keymap			= z2_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(z2_matrix_keys),
+};
+
 static struct pxa27x_keypad_platform_data z2_keypad_platform_data = {
 	.matrix_key_rows	= 7,
 	.matrix_key_cols	= 8,
-	.matrix_key_map		= z2_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(z2_matrix_keys),
+	.matrix_keymap_data	= &z2_matrix_keymap_data,
 
 	.debounce_interval	= 30,
 };

arch/arm/mach-pxa/zylonite.c

···
 #endif
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int zylonite_matrix_key_map[] = {
+static const unsigned int zylonite_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
 	KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H),
···
 	KEY(0, 3, KEY_AUX),	/* contact */
 };
 
+static struct matrix_keymap_data zylonite_matrix_keymap_data = {
+	.keymap			= zylonite_matrix_key_map,
+	.keymap_size		= ARRAY_SIZE(zylonite_matrix_key_map),
+};
+
 static struct pxa27x_keypad_platform_data zylonite_keypad_info = {
 	.matrix_key_rows	= 8,
 	.matrix_key_cols	= 8,
-	.matrix_key_map		= zylonite_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(zylonite_matrix_key_map),
+	.matrix_keymap_data	= &zylonite_matrix_keymap_data,
 
 	.enable_rotary0		= 1,
 	.rotary0_up_key		= KEY_UP,

drivers/hid/hid-apple.c

···
 		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
 		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI),
+		.driver_data = APPLE_HAS_FN },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO),
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS),
+		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),

drivers/hid/hid-core.c

···
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
···
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
 	{ }

drivers/hid/hid-ids.h

···
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS   0x023b
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI  0x0255
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO   0x0256
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI	0x0291
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO	0x0292
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS	0x0293
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY	0x030a
 #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY	0x030b
 #define USB_DEVICE_ID_APPLE_IRCONTROL	0x8240

drivers/input/evdev.c

···
 	struct input_event buffer[];
 };
 
+/* flush queued events of type @type, caller must hold client->buffer_lock */
+static void __evdev_flush_queue(struct evdev_client *client, unsigned int type)
+{
+	unsigned int i, head, num;
+	unsigned int mask = client->bufsize - 1;
+	bool is_report;
+	struct input_event *ev;
+
+	BUG_ON(type == EV_SYN);
+
+	head = client->tail;
+	client->packet_head = client->tail;
+
+	/* init to 1 so a leading SYN_REPORT will not be dropped */
+	num = 1;
+
+	for (i = client->tail; i != client->head; i = (i + 1) & mask) {
+		ev = &client->buffer[i];
+		is_report = ev->type == EV_SYN && ev->code == SYN_REPORT;
+
+		if (ev->type == type) {
+			/* drop matched entry */
+			continue;
+		} else if (is_report && !num) {
+			/* drop empty SYN_REPORT groups */
+			continue;
+		} else if (head != i) {
+			/* move entry to fill the gap */
+			client->buffer[head].time = ev->time;
+			client->buffer[head].type = ev->type;
+			client->buffer[head].code = ev->code;
+			client->buffer[head].value = ev->value;
+		}
+
+		num++;
+		head = (head + 1) & mask;
+
+		if (is_report) {
+			num = 0;
+			client->packet_head = head;
+		}
+	}
+
+	client->head = head;
+}
+
+/* queue SYN_DROPPED event */
+static void evdev_queue_syn_dropped(struct evdev_client *client)
+{
+	unsigned long flags;
+	struct input_event ev;
+	ktime_t time;
+
+	time = ktime_get();
+	if (client->clkid != CLOCK_MONOTONIC)
+		time = ktime_sub(time, ktime_get_monotonic_offset());
+
+	ev.time = ktime_to_timeval(time);
+	ev.type = EV_SYN;
+	ev.code = SYN_DROPPED;
+	ev.value = 0;
+
+	spin_lock_irqsave(&client->buffer_lock, flags);
+
+	client->buffer[client->head++] = ev;
+	client->head &= client->bufsize - 1;
+
+	if (unlikely(client->head == client->tail)) {
+		/* drop queue but keep our SYN_DROPPED event */
+		client->tail = (client->head - 1) & (client->bufsize - 1);
+		client->packet_head = client->tail;
+	}
+
+	spin_unlock_irqrestore(&client->buffer_lock, flags);
+}
+
 static void __pass_event(struct evdev_client *client,
 			 const struct input_event *event)
 {
···
 	return input_set_keycode(dev, &ke);
 }
 
+/*
+ * If we transfer state to the user, we should flush all pending events
+ * of the same type from the client's queue. Otherwise, they might end up
+ * with duplicate events, which can screw up client's state tracking.
+ * If bits_to_user fails after flushing the queue, we queue a SYN_DROPPED
+ * event so user-space will notice missing events.
+ *
+ * LOCKING:
+ * We need to take event_lock before buffer_lock to avoid dead-locks. But we
+ * need the even_lock only to guarantee consistent state. We can safely release
+ * it while flushing the queue. This allows input-core to handle filters while
+ * we flush the queue.
+ */
+static int evdev_handle_get_val(struct evdev_client *client,
+				struct input_dev *dev, unsigned int type,
+				unsigned long *bits, unsigned int max,
+				unsigned int size, void __user *p, int compat)
+{
+	int ret;
+	unsigned long *mem;
+
+	mem = kmalloc(sizeof(unsigned long) * max, GFP_KERNEL);
+	if (!mem)
+		return -ENOMEM;
+
+	spin_lock_irq(&dev->event_lock);
+	spin_lock(&client->buffer_lock);
+
+	memcpy(mem, bits, sizeof(unsigned long) * max);
+
+	spin_unlock(&dev->event_lock);
+
+	__evdev_flush_queue(client, type);
+
+	spin_unlock_irq(&client->buffer_lock);
+
+	ret = bits_to_user(mem, max, size, p, compat);
+	if (ret < 0)
+		evdev_queue_syn_dropped(client);
+
+	kfree(mem);
+
+	return ret;
+}
+
 static int evdev_handle_mt_request(struct input_dev *dev,
 				   unsigned int size,
 				   int __user *ip)
···
 		return evdev_handle_mt_request(dev, size, ip);
 
 	case EVIOCGKEY(0):
-		return bits_to_user(dev->key, KEY_MAX, size, p, compat_mode);
+		return evdev_handle_get_val(client, dev, EV_KEY, dev->key,
+					    KEY_MAX, size, p, compat_mode);
 
 	case EVIOCGLED(0):
-		return bits_to_user(dev->led, LED_MAX, size, p, compat_mode);
+		return evdev_handle_get_val(client, dev, EV_LED, dev->led,
+					    LED_MAX, size, p, compat_mode);
 
 	case EVIOCGSND(0):
-		return bits_to_user(dev->snd, SND_MAX, size, p, compat_mode);
+		return evdev_handle_get_val(client, dev, EV_SND, dev->snd,
+					    SND_MAX, size, p, compat_mode);
 
 	case EVIOCGSW(0):
-		return bits_to_user(dev->sw, SW_MAX, size, p, compat_mode);
+		return evdev_handle_get_val(client, dev, EV_SW, dev->sw,
+					    SW_MAX, size, p, compat_mode);
 
 	case EVIOCGNAME(0):
 		return str_to_user(dev->name, size, p);

drivers/input/keyboard/Kconfig

···
 	  To compile this driver as a module, choose M here: the
 	  module will be called nmk-ske-keypad.
 
+config KEYBOARD_NSPIRE
+	tristate "TI-NSPIRE built-in keyboard"
+	depends on ARCH_NSPIRE && OF
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use the built-in keypad on TI-NSPIRE.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nspire-keypad.
+
 config KEYBOARD_TEGRA
 	tristate "NVIDIA Tegra internal matrix keyboard controller support"
 	depends on ARCH_TEGRA && OF
···
 config KEYBOARD_PXA27x
 	tristate "PXA27x/PXA3xx keypad support"
 	depends on PXA27x || PXA3xx || ARCH_MMP
+	select INPUT_MATRIXKMAP
 	help
 	  Enable support for PXA27x/PXA3xx keypad controller.
 

drivers/input/keyboard/Makefile

···
 obj-$(CONFIG_KEYBOARD_MPR121)		+= mpr121_touchkey.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_NOMADIK)		+= nomadik-ske-keypad.o
+obj-$(CONFIG_KEYBOARD_NSPIRE)		+= nspire-keypad.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
 obj-$(CONFIG_KEYBOARD_OMAP4)		+= omap4-keypad.o
 obj-$(CONFIG_KEYBOARD_OPENCORES)	+= opencores-kbd.o

drivers/input/keyboard/amikbd.c

···
 {
 	struct input_dev *dev = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
 	free_irq(IRQ_AMIGA_CIAA_SP, dev);
 	input_unregister_device(dev);
 	return 0;

drivers/input/keyboard/bf54x-keys.c

···
 	kfree(bf54x_kpad->keycode);
 out:
 	kfree(bf54x_kpad);
-	platform_set_drvdata(pdev, NULL);
 
 	return error;
 }
···
 
 	kfree(bf54x_kpad->keycode);
 	kfree(bf54x_kpad);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/input/keyboard/davinci_keyscan.c

···
 	iounmap(davinci_ks->base);
 	release_mem_region(davinci_ks->pbase, davinci_ks->base_size);
 
-	platform_set_drvdata(pdev, NULL);
-
 	kfree(davinci_ks);
 
 	return 0;

drivers/input/keyboard/ep93xx_keypad.c

···
 	return 0;
 
 failed_free_irq:
-	free_irq(keypad->irq, pdev);
-	platform_set_drvdata(pdev, NULL);
+	free_irq(keypad->irq, keypad);
 failed_free_dev:
 	input_free_device(input_dev);
 failed_put_clk:
···
 	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
 	struct resource *res;
 
-	free_irq(keypad->irq, pdev);
-
-	platform_set_drvdata(pdev, NULL);
+	free_irq(keypad->irq, keypad);
 
 	if (keypad->enabled)
 		clk_disable(keypad->clk);

drivers/input/keyboard/gpio_keys.c

···
 	while (--i >= 0)
 		gpio_remove_key(&ddata->data[i]);
 
-	platform_set_drvdata(pdev, NULL);
  fail1:
 	input_free_device(input);
 	kfree(ddata);

drivers/input/keyboard/gpio_keys_polled.c

···
 
 err_free_bdev:
 	kfree(bdev);
-	platform_set_drvdata(pdev, NULL);
 
 err_free_pdata:
 	/* If we have no platform_data, we allocated pdata dynamically.  */
···
 		kfree(pdata);
 
 	kfree(bdev);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/input/keyboard/jornada680_kbd.c

···
  failed:
 	printk(KERN_ERR "Jornadakbd: failed to register driver, error: %d\n",
 		error);
-	platform_set_drvdata(pdev, NULL);
 	input_free_polled_device(poll_dev);
 	kfree(jornadakbd);
 	return error;
···
 {
 	struct jornadakbd *jornadakbd = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
 	input_unregister_polled_device(jornadakbd->poll_dev);
 	input_free_polled_device(jornadakbd->poll_dev);
 	kfree(jornadakbd);

drivers/input/keyboard/jornada720_kbd.c

···
  fail2:	/* IRQ, DEVICE, MEMORY */
 	free_irq(IRQ_GPIO0, pdev);
  fail1:	/* DEVICE, MEMORY */
-	platform_set_drvdata(pdev, NULL);
 	input_free_device(input_dev);
 	kfree(jornadakbd);
 	return err;
···
 	struct jornadakbd *jornadakbd = platform_get_drvdata(pdev);
 
 	free_irq(IRQ_GPIO0, pdev);
-	platform_set_drvdata(pdev, NULL);
 	input_unregister_device(jornadakbd->input);
 	kfree(jornadakbd);
 

drivers/input/keyboard/matrix_keypad.c

···
 	input_unregister_device(keypad->input_dev);
 	kfree(keypad);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/keyboard/nspire-keypad.c

···
+/*
+ *  Copyright (C) 2013 Daniel Tang <[e-mail]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/input/matrix_keypad.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#define KEYPAD_SCAN_MODE	0x00
+#define KEYPAD_CNTL		0x04
+#define KEYPAD_INT		0x08
+#define KEYPAD_INTMSK		0x0C
+
+#define KEYPAD_DATA		0x10
+#define KEYPAD_GPIO		0x30
+
+#define KEYPAD_UNKNOWN_INT	0x40
+#define KEYPAD_UNKNOWN_INT_STS	0x44
+
+#define KEYPAD_BITMASK_COLS	11
+#define KEYPAD_BITMASK_ROWS	8
+
+struct nspire_keypad {
+	void __iomem *reg_base;
+	u32 int_mask;
+
+	struct input_dev *input;
+	struct clk *clk;
+
+	struct matrix_keymap_data *keymap;
+	int row_shift;
+
+	/* Maximum delay estimated assuming 33MHz APB */
+	u32 scan_interval;	/* In microseconds (~2000us max) */
+	u32 row_delay;		/* In microseconds (~500us max) */
+
+	u16 state[KEYPAD_BITMASK_ROWS];
+
+	bool active_low;
+};
+
+static irqreturn_t nspire_keypad_irq(int irq, void *dev_id)
+{
+	struct nspire_keypad *keypad = dev_id;
+	struct input_dev *input = keypad->input;
+	unsigned short *keymap = input->keycode;
+	unsigned int code;
+	int row, col;
+	u32 int_sts;
+	u16 state[8];
+	u16 bits, changed;
+
+	int_sts = readl(keypad->reg_base + KEYPAD_INT) & keypad->int_mask;
+	if (!int_sts)
+		return IRQ_NONE;
+
+	memcpy_fromio(state, keypad->reg_base + KEYPAD_DATA, sizeof(state));
+
+	for (row = 0; row < KEYPAD_BITMASK_ROWS; row++) {
+		bits = state[row];
+		if (keypad->active_low)
+			bits = ~bits;
+
+		changed = bits ^ keypad->state[row];
+		if (!changed)
+			continue;
+
+		keypad->state[row] = bits;
+
+		for (col = 0; col < KEYPAD_BITMASK_COLS; col++) {
+			if (!(changed & (1U << col)))
+				continue;
+
+			code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+			input_event(input, EV_MSC, MSC_SCAN, code);
+			input_report_key(input, keymap[code],
+					 bits & (1U << col));
+		}
+	}
+
+	input_sync(input);
+
+	writel(0x3, keypad->reg_base + KEYPAD_INT);
+
+	return IRQ_HANDLED;
+}
+
+static int nspire_keypad_chip_init(struct nspire_keypad *keypad)
+{
+	unsigned long val = 0, cycles_per_us, delay_cycles, row_delay_cycles;
+
+	cycles_per_us = (clk_get_rate(keypad->clk) / 1000000);
+	if (cycles_per_us == 0)
+		cycles_per_us = 1;
+
+	delay_cycles = cycles_per_us * keypad->scan_interval;
+	WARN_ON(delay_cycles >= (1 << 16)); /* Overflow */
+	delay_cycles &= 0xffff;
+
+	row_delay_cycles = cycles_per_us * keypad->row_delay;
+	WARN_ON(row_delay_cycles >= (1 << 14)); /* Overflow */
+	row_delay_cycles &= 0x3fff;
+
+	val |= 3 << 0; /* Set scan mode to 3 (continuous scan) */
+	val |= row_delay_cycles << 2; /* Delay between scanning each row */
+	val |= delay_cycles << 16; /* Delay between scans */
+	writel(val, keypad->reg_base + KEYPAD_SCAN_MODE);
+
+	val = (KEYPAD_BITMASK_ROWS & 0xff) | (KEYPAD_BITMASK_COLS & 0xff)<<8;
+	writel(val, keypad->reg_base + KEYPAD_CNTL);
+
+	/* Enable interrupts */
+	keypad->int_mask = 1 << 1;
+	writel(keypad->int_mask, keypad->reg_base + 0xc);
+
+	/* Disable GPIO interrupts to prevent hanging on touchpad */
+	/* Possibly used to detect touchpad events */
+	writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT);
+	/* Acknowledge existing interrupts */
+	writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS);
+
+	return 0;
+}
+
+static int nspire_keypad_open(struct input_dev *input)
+{
+	struct nspire_keypad *keypad = input_get_drvdata(input);
+	int error;
+
+	error = clk_prepare_enable(keypad->clk);
+	if (error)
+		return error;
+
+	error = nspire_keypad_chip_init(keypad);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static void nspire_keypad_close(struct input_dev *input)
+{
+	struct nspire_keypad *keypad = input_get_drvdata(input);
+
+	clk_disable_unprepare(keypad->clk);
+}
+
+static int nspire_keypad_probe(struct platform_device *pdev)
+{
+	const struct device_node *of_node = pdev->dev.of_node;
+	struct nspire_keypad *keypad;
+	struct input_dev *input;
+	struct resource *res;
+	int irq;
+	int error;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "failed to get keypad irq\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing platform resources\n");
+		return -EINVAL;
+	}
+
+	keypad = devm_kzalloc(&pdev->dev, sizeof(struct nspire_keypad),
+			      GFP_KERNEL);
+	if (!keypad) {
+		dev_err(&pdev->dev, "failed to allocate keypad memory\n");
+		return -ENOMEM;
+	}
+
+	keypad->row_shift = get_count_order(KEYPAD_BITMASK_COLS);
+
+	error = of_property_read_u32(of_node, "scan-interval",
+				     &keypad->scan_interval);
+	if (error) {
+		dev_err(&pdev->dev, "failed to get scan-interval\n");
+		return error;
+	}
+
+	error = of_property_read_u32(of_node, "row-delay",
+				     &keypad->row_delay);
+	if (error) {
+		dev_err(&pdev->dev, "failed to get row-delay\n");
+		return error;
+	}
+
+	keypad->active_low = of_property_read_bool(of_node, "active-low");
+
+	keypad->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(keypad->clk)) {
+		dev_err(&pdev->dev, "unable to get clock\n");
+		return PTR_ERR(keypad->clk);
+	}
+
+	keypad->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(keypad->reg_base))
+		return PTR_ERR(keypad->reg_base);
+
+	keypad->input = input = devm_input_allocate_device(&pdev->dev);
+	if (!input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	input_set_drvdata(input, keypad);
+
+	input->id.bustype = BUS_HOST;
+	input->name = "nspire-keypad";
+	input->open = nspire_keypad_open;
+	input->close = nspire_keypad_close;
+
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(EV_REP, input->evbit);
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   KEYPAD_BITMASK_ROWS,
+					   KEYPAD_BITMASK_COLS,
+					   NULL, input);
+	if (error) {
+		dev_err(&pdev->dev, "building keymap failed\n");
+		return error;
+	}
+
+	error = devm_request_irq(&pdev->dev, irq, nspire_keypad_irq, 0,
+				 "nspire_keypad", keypad);
+	if (error) {
+		dev_err(&pdev->dev, "allocate irq %d failed\n", irq);
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev,
+			"unable to register input device: %d\n", error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, keypad);
+
+	dev_dbg(&pdev->dev,
+		"TI-NSPIRE keypad at %pR (scan_interval=%uus, row_delay=%uus%s)\n",
+		res, keypad->row_delay, keypad->scan_interval,
+		keypad->active_low ? ", active_low" : "");
+
+	return 0;
+}
+
+static const struct of_device_id nspire_keypad_dt_match[] = {
+	{ .compatible = "ti,nspire-keypad" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, nspire_keypad_dt_match);
+
+static struct platform_driver nspire_keypad_driver = {
+	.driver = {
+		.name = "nspire-keypad",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(nspire_keypad_dt_match),
+	},
+	.probe = nspire_keypad_probe,
+};
+
+module_platform_driver(nspire_keypad_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("TI-NSPIRE Keypad Driver");

drivers/input/keyboard/omap4-keypad.c

···
 	kfree(keypad_data->keymap);
 	kfree(keypad_data);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/keyboard/opencores-kbd.c

···
 	input_unregister_device(opencores_kbd->input);
 	kfree(opencores_kbd);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/keyboard/pmic8xxx-keypad.c

···
 err_get_irq:
 	input_free_device(kp->input);
 err_alloc_device:
-	platform_set_drvdata(pdev, NULL);
 	kfree(kp);
 	return rc;
 }
···
 	input_unregister_device(kp->input);
 	kfree(kp);
 
-	platform_set_drvdata(pdev, NULL);
 	return 0;
 }
 

drivers/input/keyboard/pxa27x_keypad.c

···
 #define MAX_KEYPAD_KEYS		(MAX_MATRIX_KEY_NUM + MAX_DIRECT_KEY_NUM)
 
 struct pxa27x_keypad {
-	struct pxa27x_keypad_platform_data *pdata;
+	const struct pxa27x_keypad_platform_data *pdata;
 
 	struct clk *clk;
 	struct input_dev *input_dev;
···
 	unsigned int direct_key_mask;
 };
 
-static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
+#ifdef CONFIG_OF
+static int pxa27x_keypad_matrix_key_parse_dt(struct pxa27x_keypad *keypad,
+				struct pxa27x_keypad_platform_data *pdata)
 {
-	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
 	struct input_dev *input_dev = keypad->input_dev;
-	unsigned short keycode;
-	int i;
+	struct device *dev = input_dev->dev.parent;
+	u32 rows, cols;
+	int error;
 
-	for (i = 0; i < pdata->matrix_key_map_size; i++) {
-		unsigned int key = pdata->matrix_key_map[i];
-		unsigned int row = KEY_ROW(key);
-		unsigned int col = KEY_COL(key);
-		unsigned int scancode = MATRIX_SCAN_CODE(row, col,
-							 MATRIX_ROW_SHIFT);
+	error = matrix_keypad_parse_of_params(dev, &rows, &cols);
+	if (error)
+		return error;
 
-		keycode = KEY_VAL(key);
-		keypad->keycodes[scancode] = keycode;
-		__set_bit(keycode, input_dev->keybit);
+	if (rows > MAX_MATRIX_KEY_ROWS || cols > MAX_MATRIX_KEY_COLS) {
+		dev_err(dev, "rows or cols exceeds maximum value\n");
+		return -EINVAL;
 	}
 
+	pdata->matrix_key_rows = rows;
+	pdata->matrix_key_cols = cols;
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   pdata->matrix_key_rows,
+					   pdata->matrix_key_cols,
+					   keypad->keycodes, input_dev);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static int pxa27x_keypad_direct_key_parse_dt(struct pxa27x_keypad *keypad,
+				struct pxa27x_keypad_platform_data *pdata)
+{
+	struct input_dev *input_dev = keypad->input_dev;
+	struct device *dev = input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+	const __be16 *prop;
+	unsigned short code;
+	unsigned int proplen, size;
+	int i;
+	int error;
+
+	error = of_property_read_u32(np, "marvell,direct-key-count",
+				     &pdata->direct_key_num);
+	if (error) {
+		/*
+		 * If do not have marvel,direct-key-count defined,
+		 * it means direct key is not supported.
+		 */
+		return error == -EINVAL ? 0 : error;
+	}
+
+	error = of_property_read_u32(np, "marvell,direct-key-mask",
+				     &pdata->direct_key_mask);
+	if (error) {
+		if (error != -EINVAL)
+			return error;
+
+		/*
+		 * If marvell,direct-key-mask is not defined, driver will use
+		 * default value. Default value is set when configure the keypad.
+		 */
+		pdata->direct_key_mask = 0;
+	}
+
+	pdata->direct_key_low_active = of_property_read_bool(np,
+					"marvell,direct-key-low-active");
+
+	prop = of_get_property(np, "marvell,direct-key-map", &proplen);
+	if (!prop)
+		return -EINVAL;
+
+	if (proplen % sizeof(u16))
+		return -EINVAL;
+
+	size = proplen / sizeof(u16);
+
+	/* Only MAX_DIRECT_KEY_NUM is accepted.*/
+	if (size > MAX_DIRECT_KEY_NUM)
+		return -EINVAL;
+
+	for (i = 0; i < size; i++) {
+		code = be16_to_cpup(prop + i);
+		keypad->keycodes[MAX_MATRIX_KEY_NUM + i] = code;
+		__set_bit(code, input_dev->keybit);
+	}
+
+	return 0;
+}
+
+static int pxa27x_keypad_rotary_parse_dt(struct pxa27x_keypad *keypad,
+				struct pxa27x_keypad_platform_data *pdata)
+{
+	const __be32 *prop;
+	int i, relkey_ret;
+	unsigned int code, proplen;
+	const char *rotaryname[2] = {
+			"marvell,rotary0", "marvell,rotary1"};
+	const char relkeyname[] = {"marvell,rotary-rel-key"};
+	struct input_dev *input_dev = keypad->input_dev;
+	struct device *dev = input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+
+	relkey_ret = of_property_read_u32(np, relkeyname, &code);
+	/* if can read correct rotary key-code, we do not need this. */
+	if (relkey_ret == 0) {
+		unsigned short relcode;
+
+		/* rotary0 taks lower half, rotary1 taks upper half. */
+		relcode = code & 0xffff;
+		pdata->rotary0_rel_code = (code & 0xffff);
+		__set_bit(relcode, input_dev->relbit);
+
+		relcode = code >> 16;
+		pdata->rotary1_rel_code = relcode;
+		__set_bit(relcode, input_dev->relbit);
+	}
+
+	for (i = 0; i < 2; i++) {
+		prop = of_get_property(np, rotaryname[i], &proplen);
+		/*
+		 * If the prop is not set, it means keypad does not need
+		 * initialize the rotaryX.
+		 */
+		if (!prop)
+			continue;
+
+		code = be32_to_cpup(prop);
+		/*
+		 * Not all up/down key code are valid.
+		 * Now we depends on direct-rel-code.
+		 */
+		if ((!(code & 0xffff) || !(code >> 16)) && relkey_ret) {
+			return relkey_ret;
+		} else {
+			unsigned int n = MAX_MATRIX_KEY_NUM + (i << 1);
+			unsigned short keycode;
+
+			keycode = code & 0xffff;
+			keypad->keycodes[n] = keycode;
+			__set_bit(keycode, input_dev->keybit);
+
+			keycode = code >> 16;
+			keypad->keycodes[n + 1] = keycode;
+			__set_bit(keycode, input_dev->keybit);
+
+			if (i == 0)
+				pdata->rotary0_rel_code = -1;
+			else
+				pdata->rotary1_rel_code = -1;
+		}
+		if (i == 0)
+			pdata->enable_rotary0 = 1;
+		else
+			pdata->enable_rotary1 = 1;
+	}
+
+	keypad->rotary_rel_code[0] = pdata->rotary0_rel_code;
+	keypad->rotary_rel_code[1] = pdata->rotary1_rel_code;
+
+	return 0;
+}
+
+static int pxa27x_keypad_build_keycode_from_dt(struct pxa27x_keypad *keypad)
+{
+	struct input_dev *input_dev = keypad->input_dev;
+	struct device *dev = input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+	struct pxa27x_keypad_platform_data *pdata;
+	int error;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(dev, "failed to allocate memory for pdata\n");
+		return -ENOMEM;
+	}
+
+	error = pxa27x_keypad_matrix_key_parse_dt(keypad, pdata);
+	if (error) {
+		dev_err(dev, "failed to parse matrix key\n");
+		return error;
+	}
+
+	error = pxa27x_keypad_direct_key_parse_dt(keypad, pdata);
+	if (error) {
+		dev_err(dev, "failed to parse direct key\n");
+		return error;
+	}
+
+	error = pxa27x_keypad_rotary_parse_dt(keypad, pdata);
+	if (error) {
+		dev_err(dev, "failed to parse rotary key\n");
+		return error;
+	}
+
+	error = of_property_read_u32(np, "marvell,debounce-interval",
+				     &pdata->debounce_interval);
+	if (error) {
+		dev_err(dev, "failed to parse debpunce-interval\n");
+		return error;
+	}
+
+	/*
+	 * The keycodes may not only includes matrix key but also the direct
+	 * key or rotary key.
+	 */
+	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+
+	keypad->pdata = pdata;
+	return 0;
+}
+
+#else
+
+static int pxa27x_keypad_build_keycode_from_dt(struct pxa27x_keypad *keypad)
+{
+	dev_info(keypad->input_dev->dev.parent, "missing platform data\n");
+
+	return -EINVAL;
+}
+
+#endif
+
+static int pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
+{
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	struct input_dev *input_dev = keypad->input_dev;
+	const struct matrix_keymap_data *keymap_data =
+				pdata ? pdata->matrix_keymap_data : NULL;
+	unsigned short keycode;
+	int i;
+	int error;
+
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   pdata->matrix_key_rows,
+					   pdata->matrix_key_cols,
+					   keypad->keycodes, input_dev);
+	if (error)
+		return error;
+
+	/*
+	 * The keycodes may not only include matrix keys but also the direct
+	 * or rotary keys.
+	 */
+	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+
+	/* For direct keys. */
 	for (i = 0; i < pdata->direct_key_num; i++) {
 		keycode = pdata->direct_key_map[i];
 		keypad->keycodes[MAX_MATRIX_KEY_NUM + i] = keycode;
···
 	}
 
 	__clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	return 0;
 }
 
 static void pxa27x_keypad_scan_matrix(struct pxa27x_keypad *keypad)
 {
-	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
 	struct input_dev *input_dev = keypad->input_dev;
 	int row, col, num_keys_pressed = 0;
 	uint32_t new_state[MAX_MATRIX_KEY_COLS];
···
 
 static void pxa27x_keypad_scan_rotary(struct pxa27x_keypad *keypad)
 {
-	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
 	uint32_t kprec;
 
 	/* read and reset to default count value */
···
 
 static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad)
 {
-	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
 	struct input_dev *input_dev = keypad->input_dev;
 	unsigned int new_state;
 	uint32_t kpdk, bits_changed;
···
 
 static void clear_wakeup_event(struct pxa27x_keypad *keypad)
 {
-	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
 
 	if (pdata->clear_wakeup_event)
 		(pdata->clear_wakeup_event)();
···
 
 static void pxa27x_keypad_config(struct pxa27x_keypad *keypad)
 {
-	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+	const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
 	unsigned int mask = 0, direct_key_num = 0;
 	unsigned long kpc = 0;
 
···
 	clk_disable_unprepare(keypad->clk);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int pxa27x_keypad_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
···
 
 	return 0;
 }
-
-static const struct dev_pm_ops pxa27x_keypad_pm_ops = {
-	.suspend	= pxa27x_keypad_suspend,
-	.resume		= pxa27x_keypad_resume,
-};
 #endif
+
+static SIMPLE_DEV_PM_OPS(pxa27x_keypad_pm_ops,
+			 pxa27x_keypad_suspend, pxa27x_keypad_resume);
+
 
 static int pxa27x_keypad_probe(struct platform_device *pdev)
 {
-	struct pxa27x_keypad_platform_data *pdata = pdev->dev.platform_data;
+	const struct pxa27x_keypad_platform_data *pdata =
+					dev_get_platdata(&pdev->dev);
+	struct device_node *np = pdev->dev.of_node;
 	struct pxa27x_keypad *keypad;
 	struct input_dev *input_dev;
 	struct resource *res;
 	int irq, error;
 
-	if (pdata == NULL) {
-		dev_err(&pdev->dev, "no platform data defined\n");
+	/* Driver need build keycode from device tree or pdata */
+	if (!np && !pdata)
 		return -EINVAL;
-	}
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
···
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 
-	pxa27x_keypad_build_keycode(keypad);
+	if (pdata)
+		error = pxa27x_keypad_build_keycode(keypad);
+	else
+		error = pxa27x_keypad_build_keycode_from_dt(keypad);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keycode\n");
+		goto failed_put_clk;
+	}
 
 	if ((pdata->enable_rotary0 && keypad->rotary_rel_code[0] != -1) ||
 	    (pdata->enable_rotary1 && keypad->rotary_rel_code[1] != -1)) {
···
 	return 0;
 
 failed_free_irq:
-	free_irq(irq, pdev);
+	free_irq(irq, keypad);
 failed_put_clk:
 	clk_put(keypad->clk);
 failed_free_io:
···
 	struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
 	struct resource *res;
 
-	free_irq(keypad->irq, pdev);
+	free_irq(keypad->irq, keypad);
 	clk_put(keypad->clk);
 
 	input_unregister_device(keypad->input_dev);
···
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
-	platform_set_drvdata(pdev, NULL);
 	kfree(keypad);
 
 	return 0;
···
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:pxa27x-keypad");
 
+#ifdef CONFIG_OF
+static const struct of_device_id pxa27x_keypad_dt_match[] = {
+	{ .compatible = "marvell,pxa27x-keypad" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pxa27x_keypad_dt_match);
+#endif
+
 static struct platform_driver pxa27x_keypad_driver = {
 	.probe		= pxa27x_keypad_probe,
 	.remove		= pxa27x_keypad_remove,
 	.driver		= {
 		.name	= "pxa27x-keypad",
+		.of_match_table = of_match_ptr(pxa27x_keypad_dt_match),
 		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
 		.pm	= &pxa27x_keypad_pm_ops,
-#endif
 	},
 };
 module_platform_driver(pxa27x_keypad_driver);

drivers/input/keyboard/pxa930_rotary.c

···
 	free_irq(platform_get_irq(pdev, 0), r);
 	input_unregister_device(r->input_dev);
 	iounmap(r->mmio_base);
-	platform_set_drvdata(pdev, NULL);
 	kfree(r);
 
 	return 0;

drivers/input/keyboard/samsung-keypad.c

···
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/sched.h>
 #include <linux/input/samsung-keypad.h>
 
···
 	unsigned int rows;
 	unsigned int cols;
 	unsigned int row_state[SAMSUNG_MAX_COLS];
-#ifdef CONFIG_OF
-	int row_gpios[SAMSUNG_MAX_ROWS];
-	int col_gpios[SAMSUNG_MAX_COLS];
-#endif
 	unsigned short keycodes[];
 };
 
···
 
 	return pdata;
 }
-
-static void samsung_keypad_parse_dt_gpio(struct device *dev,
-				struct samsung_keypad *keypad)
-{
-	struct device_node *np = dev->of_node;
-	int gpio, error, row, col;
-
-	for (row = 0; row < keypad->rows; row++) {
-		gpio = of_get_named_gpio(np, "row-gpios", row);
-		keypad->row_gpios[row] = gpio;
-		if (!gpio_is_valid(gpio)) {
-			dev_err(dev, "keypad row[%d]: invalid gpio %d\n",
-					row, gpio);
-			continue;
-		}
-
-		error = devm_gpio_request(dev, gpio, "keypad-row");
-		if (error)
-			dev_err(dev,
-				"keypad row[%d] gpio request failed: %d\n",
-				row, error);
-	}
-
-	for (col = 0; col < keypad->cols; col++) {
-		gpio = of_get_named_gpio(np, "col-gpios", col);
-		keypad->col_gpios[col] = gpio;
-		if (!gpio_is_valid(gpio)) {
-			dev_err(dev, "keypad column[%d]: invalid gpio %d\n",
-					col, gpio);
-			continue;
-		}
-
-		error = devm_gpio_request(dev, gpio, "keypad-col");
-		if (error)
-			dev_err(dev,
-				"keypad column[%d] gpio request failed: %d\n",
-				col, error);
-	}
-}
 #else
 static
 struct samsung_keypad_platdata *samsung_keypad_parse_dt(struct device *dev)
···
 	keypad->stopped = true;
 	init_waitqueue_head(&keypad->wait);
 
-	if (pdev->dev.of_node) {
-#ifdef CONFIG_OF
-		samsung_keypad_parse_dt_gpio(&pdev->dev, keypad);
+	if (pdev->dev.of_node)
 		keypad->type = of_device_is_compatible(pdev->dev.of_node,
 					"samsung,s5pv210-keypad");
-#endif
-	} else {
+	else
 		keypad->type = platform_get_device_id(pdev)->driver_data;
-	}
 
 	input_dev->name = pdev->name;
 	input_dev->id.bustype = BUS_HOST;
···
 err_disable_runtime_pm:
 	pm_runtime_disable(&pdev->dev);
 	device_init_wakeup(&pdev->dev, 0);
-	platform_set_drvdata(pdev, NULL);
 err_unprepare_clk:
 	clk_unprepare(keypad->clk);
 	return error;
···
 
 	pm_runtime_disable(&pdev->dev);
 	device_init_wakeup(&pdev->dev, 0);
-	platform_set_drvdata(pdev, NULL);
 
 	input_unregister_device(keypad->input_dev);
 

drivers/input/keyboard/sh_keysc.c

···
  err2:
 	iounmap(priv->iomem_base);
  err1:
-	platform_set_drvdata(pdev, NULL);
 	kfree(priv);
  err0:
 	return error;
···
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
-	platform_set_drvdata(pdev, NULL);
 	kfree(priv);
 
 	return 0;

drivers/input/keyboard/spear-keyboard.c

···
 	clk_unprepare(kbd->clk);
 
 	device_init_wakeup(&pdev->dev, 0);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/input/keyboard/tnetv107x-keypad.c

···
 error_map:
 	release_mem_region(kp->res->start, resource_size(kp->res));
 error_res:
-	platform_set_drvdata(pdev, NULL);
 	kfree(kp);
 	return error;
 }
···
 	clk_put(kp->clk);
 	iounmap(kp->regs);
 	release_mem_region(kp->res->start, resource_size(kp->res));
-	platform_set_drvdata(pdev, NULL);
 	kfree(kp);
 
 	return 0;

drivers/input/keyboard/twl4030_keypad.c

···
 err3:
 	/* mask all events - we don't care about the result */
 	(void) twl4030_kpwrite_u8(kp, 0xff, KEYP_IMR1);
-	free_irq(kp->irq, NULL);
+	free_irq(kp->irq, kp);
 err2:
 	input_unregister_device(input);
 	input = NULL;
···
 
 	free_irq(kp->irq, kp);
 	input_unregister_device(kp->input);
-	platform_set_drvdata(pdev, NULL);
 	kfree(kp);
 
 	return 0;

drivers/input/keyboard/w90p910_keypad.c

···
 	return 0;
 
 failed_free_irq:
-	free_irq(irq, pdev);
+	free_irq(irq, keypad);
 failed_put_clk:
 	clk_put(keypad->clk);
 failed_free_io:
···
 	struct w90p910_keypad *keypad = platform_get_drvdata(pdev);
 	struct resource *res;
 
-	free_irq(keypad->irq, pdev);
+	free_irq(keypad->irq, keypad);
 
 	clk_put(keypad->clk);
 
···
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
-	platform_set_drvdata(pdev, NULL);
 	kfree(keypad);
 
 	return 0;

drivers/input/misc/Kconfig

···
 	  To compile this driver as a module, choose M here: the
 	  module will be called xen-kbdfront.
 
+config INPUT_SIRFSOC_ONKEY
+	bool "CSR SiRFSoC power on/off/suspend key support"
+	depends on ARCH_SIRF && OF
+	default y
+	help
+	  Say Y here if you want to support for the SiRFSoC power on/off/suspend key
+	  in Linux, after you press the onkey, system will suspend.
+
+	  If unsure, say N.
+
 endif

drivers/input/misc/Makefile

···
 obj-$(CONFIG_INPUT_RETU_PWRBUTTON)	+= retu-pwrbutton.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
+obj-$(CONFIG_INPUT_SIRFSOC_ONKEY)	+= sirfsoc-onkey.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
 obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o

drivers/input/misc/ab8500-ponkey.c

···
 	input_unregister_device(ponkey->idev);
 	kfree(ponkey);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/misc/bfin_rotary.c

···
 	peripheral_free_list(per_cnt);
 
 	kfree(rotary);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/input/misc/gpio_tilt_polled.c

···
 	struct gpio_tilt_polled_dev *tdev = platform_get_drvdata(pdev);
 	const struct gpio_tilt_platform_data *pdata = tdev->pdata;
 
-	platform_set_drvdata(pdev, NULL);
-
 	input_unregister_polled_device(tdev->poll_dev);
 	input_free_polled_device(tdev->poll_dev);
 

drivers/input/misc/ixp4xx-beeper.c

···
 	return 0;
 
  err_free_irq:
-	free_irq(IRQ_IXP4XX_TIMER2, dev);
+	free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id);
  err_free_device:
 	input_free_device(input_dev);
 
···
 	unsigned int pin = (unsigned int) input_get_drvdata(input_dev);
 
 	input_unregister_device(input_dev);
-	platform_set_drvdata(dev, NULL);
 
 	/* turn the speaker off */
 	disable_irq(IRQ_IXP4XX_TIMER2);
 	ixp4xx_spkr_control(pin, 0);
 
-	free_irq(IRQ_IXP4XX_TIMER2, dev);
+	free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id);
 
 	return 0;
 }

drivers/input/misc/m68kspkr.c

···
 	struct input_dev *input_dev = platform_get_drvdata(dev);
 
 	input_unregister_device(input_dev);
-	platform_set_drvdata(dev, NULL);
 	/* turn off the speaker */
 	m68kspkr_event(NULL, EV_SND, SND_BELL, 0);
 

drivers/input/misc/max8925_onkey.c

···
 	input_unregister_device(info->idev);
 	kfree(info);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/misc/mc13783-pwrbutton.c

···
 
 	input_unregister_device(priv->pwr);
 	kfree(priv);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/input/misc/pcspkr.c

···
 	struct input_dev *pcspkr_dev = platform_get_drvdata(dev);
 
 	input_unregister_device(pcspkr_dev);
-	platform_set_drvdata(dev, NULL);
 	/* turn off the speaker */
 	pcspkr_event(NULL, EV_SND, SND_BELL, 0);
 

drivers/input/misc/pm8xxx-vibrator.c

···
 	input_unregister_device(vib->vib_input_dev);
 	kfree(vib);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/misc/pmic8xxx-pwrkey.c

···
 	return 0;
 
 free_press_irq:
-	free_irq(key_press_irq, NULL);
+	free_irq(key_press_irq, pwrkey);
 unreg_input_dev:
-	platform_set_drvdata(pdev, NULL);
 	input_unregister_device(pwr);
 	pwr = NULL;
 free_input_dev:
···
 	free_irq(key_press_irq, pwrkey);
 	free_irq(key_release_irq, pwrkey);
 	input_unregister_device(pwrkey->pwr);
-	platform_set_drvdata(pdev, NULL);
 	kfree(pwrkey);
 
 	return 0;

drivers/input/misc/pwm-beeper.c

···
 {
 	struct pwm_beeper *beeper = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
 	input_unregister_device(beeper->input);
 
 	pwm_disable(beeper->pwm);

drivers/input/misc/rotary_encoder.c

···
 	if (!dev_get_platdata(&pdev->dev))
 		kfree(pdata);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/misc/sgi_btns.c

···
 	__clear_bit(KEY_RESERVED, input->keybit);
 
 	bdev->poll_dev = poll_dev;
-	dev_set_drvdata(&pdev->dev, bdev);
+	platform_set_drvdata(pdev, bdev);
 
 	error = input_register_polled_device(poll_dev);
 	if (error)
···
  err_free_mem:
 	input_free_polled_device(poll_dev);
 	kfree(bdev);
-	dev_set_drvdata(&pdev->dev, NULL);
 	return error;
 }
 
 static int sgi_buttons_remove(struct platform_device *pdev)
 {
-	struct device *dev = &pdev->dev;
-	struct buttons_dev *bdev = dev_get_drvdata(dev);
+	struct buttons_dev *bdev = platform_get_drvdata(pdev);
 
 	input_unregister_polled_device(bdev->poll_dev);
 	input_free_polled_device(bdev->poll_dev);
 	kfree(bdev);
-	dev_set_drvdata(dev, NULL);
 
 	return 0;
 }

drivers/input/misc/sirfsoc-onkey.c

···
+/*
+ * Power key driver for SiRF PrimaII
+ *
+ * Copyright (c) 2013 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/rtc/sirfsoc_rtciobrg.h>
+#include <linux/of.h>
+
+struct sirfsoc_pwrc_drvdata {
+	u32			pwrc_base;
+	struct input_dev	*input;
+};
+
+#define PWRC_ON_KEY_BIT			(1 << 0)
+
+#define PWRC_INT_STATUS			0xc
+#define PWRC_INT_MASK			0x10
+
+static irqreturn_t sirfsoc_pwrc_isr(int irq, void *dev_id)
+{
+	struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_id;
+	u32 int_status;
+
+	int_status = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base +
+							PWRC_INT_STATUS);
+	sirfsoc_rtc_iobrg_writel(int_status & ~PWRC_ON_KEY_BIT,
+				 pwrcdrv->pwrc_base + PWRC_INT_STATUS);
+
+	/*
+	 * For a typical Linux system, we report KEY_SUSPEND to trigger apm-power.c
+	 * to queue a SUSPEND APM event
+	 */
+	input_event(pwrcdrv->input, EV_PWR, KEY_SUSPEND, 1);
+	input_sync(pwrcdrv->input);
+
+	/*
+	 * Todo: report KEY_POWER event for Android platforms, Android PowerManager
+	 * will handle the suspend and powerdown/hibernation
+	 */
+
+	return IRQ_HANDLED;
+}
+
+static const struct of_device_id sirfsoc_pwrc_of_match[] = {
+	{ .compatible = "sirf,prima2-pwrc" },
+	{},
+}
+MODULE_DEVICE_TABLE(of, sirfsoc_pwrc_of_match);
+
+static int sirfsoc_pwrc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sirfsoc_pwrc_drvdata *pwrcdrv;
+	int irq;
+	int error;
+
+	pwrcdrv = devm_kzalloc(&pdev->dev, sizeof(struct sirfsoc_pwrc_drvdata),
+			       GFP_KERNEL);
+	if (!pwrcdrv) {
+		dev_info(&pdev->dev, "Not enough memory for the device data\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * we can't use of_iomap because pwrc is not mapped in memory,
+	 * the so-called base address is only offset in rtciobrg
+	 */
+	error = of_property_read_u32(np, "reg", &pwrcdrv->pwrc_base);
+	if (error) {
+		dev_err(&pdev->dev,
+			"unable to find base address of pwrc node in dtb\n");
+		return error;
+	}
+
+	pwrcdrv->input = devm_input_allocate_device(&pdev->dev);
+	if (!pwrcdrv->input)
+		return -ENOMEM;
+
+	pwrcdrv->input->name = "sirfsoc pwrckey";
+	pwrcdrv->input->phys = "pwrc/input0";
+	pwrcdrv->input->evbit[0] = BIT_MASK(EV_PWR);
+
+	irq = platform_get_irq(pdev, 0);
+	error = devm_request_irq(&pdev->dev, irq,
+				 sirfsoc_pwrc_isr, IRQF_SHARED,
+				 "sirfsoc_pwrc_int", pwrcdrv);
+	if (error) {
+		dev_err(&pdev->dev, "unable to claim irq %d, error: %d\n",
+			irq, error);
+		return error;
+	}
+
+	sirfsoc_rtc_iobrg_writel(
+		sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base + PWRC_INT_MASK) |
+			PWRC_ON_KEY_BIT,
+		pwrcdrv->pwrc_base + PWRC_INT_MASK);
+
+	error = input_register_device(pwrcdrv->input);
+	if (error) {
+		dev_err(&pdev->dev,
+			"unable to register input device, error: %d\n",
+			error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, pwrcdrv);
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+}
+
+static int sirfsoc_pwrc_remove(struct platform_device *pdev)
+{
+	device_init_wakeup(&pdev->dev, 0);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pwrc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sirfsoc_pwrc_drvdata *pwrcdrv = platform_get_drvdata(pdev);
+
+	/*
+	 * Do not mask pwrc interrupt as we want pwrc work as a wakeup source
+	 * if users touch X_ONKEY_B, see arch/arm/mach-prima2/pm.c
+	 */
+	sirfsoc_rtc_iobrg_writel(
+		sirfsoc_rtc_iobrg_readl(
+		pwrcdrv->pwrc_base + PWRC_INT_MASK) | PWRC_ON_KEY_BIT,
+		pwrcdrv->pwrc_base + PWRC_INT_MASK);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sirfsoc_pwrc_pm_ops, NULL, pwrc_resume);
+
+static struct platform_driver sirfsoc_pwrc_driver = {
+	.probe		= sirfsoc_pwrc_probe,
+	.remove		= sirfsoc_pwrc_remove,
+	.driver		= {
+		.name	= "sirfsoc-pwrc",
+		.owner	= THIS_MODULE,
+		.pm	= &sirfsoc_pwrc_pm_ops,
+		.of_match_table = of_match_ptr(sirfsoc_pwrc_of_match),
+	}
+};
+
+module_platform_driver(sirfsoc_pwrc_driver);
+
+MODULE_LICENSE("GPLv2");
+MODULE_AUTHOR("Binghua Duan <[e-mail]>, Xianglong Du <[e-mail]>");
+MODULE_DESCRIPTION("CSR Prima2 PWRC Driver");
+MODULE_ALIAS("platform:sirfsoc-pwrc");

drivers/input/misc/sparcspkr.c

···
 
 static void sparcspkr_shutdown(struct platform_device *dev)
 {
-	struct sparcspkr_state *state = dev_get_drvdata(&dev->dev);
+	struct sparcspkr_state *state = platform_get_drvdata(dev);
 	struct input_dev *input_dev = state->input_dev;
 
 	/* turn off the speaker */
···
 	if (!info->regs)
 		goto out_free;
 
-	dev_set_drvdata(&op->dev, state);
+	platform_set_drvdata(op, state);
 
 	err = sparcspkr_probe(&op->dev);
 	if (err)
···
 	return 0;
 
 out_clear_drvdata:
-	dev_set_drvdata(&op->dev, NULL);
 	of_iounmap(&op->resource[0], info->regs, 6);
 
 out_free:
···
 
 static int bbc_remove(struct platform_device *op)
 {
-	struct sparcspkr_state *state = dev_get_drvdata(&op->dev);
+	struct sparcspkr_state *state = platform_get_drvdata(op);
 	struct input_dev *input_dev = state->input_dev;
 	struct bbc_beep_info *info = &state->u.bbc;
 
···
 
 	of_iounmap(&op->resource[0], info->regs, 6);
 
-	dev_set_drvdata(&op->dev, NULL);
 	kfree(state);
 
 	return 0;
···
 	if (!info->enable_reg)
 		goto out_unmap_freq_regs;
 
-	dev_set_drvdata(&op->dev, state);
+	platform_set_drvdata(op, state);
 
 	err = sparcspkr_probe(&op->dev);
 	if (err)
···
 	return 0;
 
 out_clear_drvdata:
-	dev_set_drvdata(&op->dev, NULL);
 	of_iounmap(&op->resource[3], info->enable_reg, 1);
 
 out_unmap_freq_regs:
···
 
 static int grover_remove(struct platform_device *op)
 {
-	struct sparcspkr_state *state = dev_get_drvdata(&op->dev);
+	struct sparcspkr_state *state = platform_get_drvdata(op);
 	struct grover_beep_info *info = &state->u.grover;
 	struct input_dev *input_dev = state->input_dev;
 
···
 	of_iounmap(&op->resource[3], info->enable_reg, 1);
 	of_iounmap(&op->resource[2], info->freq_regs, 2);
 
-	dev_set_drvdata(&op->dev, NULL);
 	kfree(state);
 
 	return 0;

drivers/input/mouse/amimouse.c

···
 {
 	struct input_dev *dev = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
 	input_unregister_device(dev);
 	return 0;
 }

drivers/input/mouse/bcm5974.c

···
 #define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI	0x0259
 #define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO	0x025a
 #define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS	0x025b
+/* MacbookAir6,2 (unibody, June 2013) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI	0x0291
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO	0x0292
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS	0x0293
 
 #define BCM5974_DEVICE(prod) {					\
 	.match_flags = (USB_DEVICE_ID_MATCH_DEVICE |		\
···
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
+	/* MacbookAir6,2 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_JIS),
 	/* Terminating entry */
 	{}
 };
···
 /* trackpad header types */
 enum tp_type {
 	TYPE1,			/* plain trackpad */
-	TYPE2			/* button integrated in trackpad */
+	TYPE2,			/* button integrated in trackpad */
+	TYPE3			/* additional header fields since June 2013 */
 };
 
 /* trackpad finger data offsets, le16-aligned */
 #define FINGER_TYPE1		(13 * sizeof(__le16))
 #define FINGER_TYPE2		(15 * sizeof(__le16))
+#define FINGER_TYPE3		(19 * sizeof(__le16))
 
 /* trackpad button data offsets */
 #define BUTTON_TYPE2		15
+#define BUTTON_TYPE3		23
 
 /* list of device capability bits */
 #define HAS_INTEGRATED_BUTTON	1
···
 		{ SN_COORD, -150, 6730 },
 		{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
 	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING8_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING8_JIS,
+		HAS_INTEGRATED_BUTTON,
+		0, sizeof(struct bt_data),
+		0x83, TYPE3, FINGER_TYPE3, FINGER_TYPE3 + SIZEOF_ALL_FINGERS,
+		{ SN_PRESSURE, 0, 300 },
+		{ SN_WIDTH, 0, 2048 },
+		{ SN_COORD, -4620, 5140 },
+		{ SN_COORD, -150, 6600 },
+		{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
+	},
 	{}
 };
 
···
 		input_report_key(input, BTN_LEFT, ibt);
 	}
 
+	if (c->tp_type == TYPE3)
+		input_report_key(input, BTN_LEFT, dev->tp_data[BUTTON_TYPE3]);
+
 	input_sync(input);
 
 	return 0;
···
 
 static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
 {
-	char *data = kmalloc(8, GFP_KERNEL);
 	int retval = 0, size;
+	char *data;
 
+	/* Type 3 does not require a mode switch */
+	if (dev->cfg.tp_type == TYPE3)
+		return 0;
+
+	data = kmalloc(8, GFP_KERNEL);
 	if (!data) {
 		dev_err(&dev->intf->dev, "out of memory\n");
 		retval = -ENOMEM;

drivers/input/mouse/gpio_mouse.c

···
 
  out_free_polldev:
 	input_free_polled_device(input_poll);
-	platform_set_drvdata(pdev, NULL);
 
  out_free_gpios:
 	while (--i >= 0) {
···
 		if (pin >= 0)
 			gpio_free(pin);
 	}
-
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/input/mouse/navpoint.c

···
 	return 0;
 
 err_free_irq:
-	free_irq(ssp->irq, &pdev->dev);
+	free_irq(ssp->irq, navpoint);
 err_free_mem:
 	input_free_device(input);
 	kfree(navpoint);

drivers/input/serio/Kconfig

···
 	  To compile this driver as a module, choose M here: the module will
 	  be called apbps2.
 
+config SERIO_OLPC_APSP
+	tristate "OLPC AP-SP input support"
+	depends on OF
+	help
+	  Say Y here if you want support for the keyboard and touchpad included
+	  in the OLPC XO-1.75 and XO-4 laptops.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called olpc_apsp.
+
 endif

drivers/input/serio/Makefile

···
 obj-$(CONFIG_SERIO_ALTERA_PS2)	+= altera_ps2.o
 obj-$(CONFIG_SERIO_ARC_PS2)	+= arc_ps2.o
 obj-$(CONFIG_SERIO_APBPS2)	+= apbps2.o
+obj-$(CONFIG_SERIO_OLPC_APSP)	+= olpc_apsp.o

drivers/input/serio/altera_ps2.c

···
 {
 	struct ps2if *ps2if = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
 	serio_unregister_port(ps2if->io);
 	free_irq(ps2if->irq, ps2if);
 	iounmap(ps2if->base);

drivers/input/serio/at32psif.c

···
 	clk_put(psif->pclk);
 	kfree(psif);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/serio/olpc_apsp.c

···
+/*
+ * OLPC serio driver for multiplexed input from Marvell MMP security processor
+ *
+ * Copyright (C) 2011-2013 One Laptop Per Child
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+/*
+ * The OLPC XO-1.75 and XO-4 laptops do not have a hardware PS/2 controller.
+ * Instead, the OLPC firmware runs a bit-banging PS/2 implementation on an
+ * otherwise-unused slow processor which is included in the Marvell MMP2/MMP3
+ * SoC, known as the "Security Processor" (SP) or "Wireless Trusted Module"
+ * (WTM). This firmware then reports its results via the WTM registers,
+ * which we read from the Application Processor (AP, i.e. main CPU) in this
+ * driver.
+ *
+ * On the hardware side we have a PS/2 mouse and an AT keyboard, the data
+ * is multiplexed through this system. We create a serio port for each one,
+ * and demultiplex the data accordingly.
+ */
+
+/* WTM register offsets */
+#define SECURE_PROCESSOR_COMMAND	0x40
+#define COMMAND_RETURN_STATUS		0x80
+#define COMMAND_FIFO_STATUS		0xc4
+#define PJ_RST_INTERRUPT		0xc8
+#define PJ_INTERRUPT_MASK		0xcc
+
+/*
+ * The upper byte of SECURE_PROCESSOR_COMMAND and COMMAND_RETURN_STATUS is
+ * used to identify which port (device) is being talked to. The lower byte
+ * is the data being sent/received.
+ */
+#define PORT_MASK	0xff00
+#define DATA_MASK	0x00ff
+#define PORT_SHIFT	8
+#define KEYBOARD_PORT	0
+#define TOUCHPAD_PORT	1
+
+/* COMMAND_FIFO_STATUS */
+#define CMD_CNTR_MASK		0x7 /* Number of pending/unprocessed commands */
+#define MAX_PENDING_CMDS	4   /* from device specs */
+
+/* PJ_RST_INTERRUPT */
+#define SP_COMMAND_COMPLETE_RESET	0x1
+
+/* PJ_INTERRUPT_MASK */
+#define INT_0	(1 << 0)
+
+/* COMMAND_FIFO_STATUS */
+#define CMD_STS_MASK	0x100
+
+struct olpc_apsp {
+	struct device *dev;
+	struct serio *kbio;
+	struct serio *padio;
+	void __iomem *base;
+	int open_count;
+	int irq;
+};
+
+static int olpc_apsp_write(struct serio *port, unsigned char val)
+{
+	struct olpc_apsp *priv = port->port_data;
+	unsigned int i;
+	u32 which = 0;
+
+	if (port == priv->padio)
+		which = TOUCHPAD_PORT << PORT_SHIFT;
+	else
+		which = KEYBOARD_PORT << PORT_SHIFT;
+
+	dev_dbg(priv->dev, "olpc_apsp_write which=%x val=%x\n", which, val);
+	for (i = 0; i < 50; i++) {
+		u32 sts = readl(priv->base + COMMAND_FIFO_STATUS);
+		if ((sts & CMD_CNTR_MASK) < MAX_PENDING_CMDS) {
+			writel(which | val,
+			       priv->base + SECURE_PROCESSOR_COMMAND);
+			return 0;
+		}
+		/* SP busy. This has not been seen in practice. */
+		mdelay(1);
+	}
+
+	dev_dbg(priv->dev, "olpc_apsp_write timeout, status=%x\n",
+		readl(priv->base + COMMAND_FIFO_STATUS));
+
+	return -ETIMEDOUT;
+}
+
+static irqreturn_t olpc_apsp_rx(int irq, void *dev_id)
+{
+	struct olpc_apsp *priv = dev_id;
+	unsigned int w, tmp;
+	struct serio *serio;
+
+	/*
+	 * Write 1 to PJ_RST_INTERRUPT to acknowledge and clear the interrupt
+	 * Write 0xff00 to SECURE_PROCESSOR_COMMAND.
+	 */
+	tmp = readl(priv->base + PJ_RST_INTERRUPT);
+	if (!(tmp & SP_COMMAND_COMPLETE_RESET)) {
+		dev_warn(priv->dev, "spurious interrupt?\n");
+		return IRQ_NONE;
+	}
+
+	w = readl(priv->base + COMMAND_RETURN_STATUS);
+	dev_dbg(priv->dev, "olpc_apsp_rx %x\n", w);
+
+	if (w >> PORT_SHIFT == KEYBOARD_PORT)
+		serio = priv->kbio;
+	else
+		serio = priv->padio;
+
+	serio_interrupt(serio, w & DATA_MASK, 0);
+
+	/* Ack and clear interrupt */
+	writel(tmp | SP_COMMAND_COMPLETE_RESET, priv->base + PJ_RST_INTERRUPT);
+	writel(PORT_MASK, priv->base + SECURE_PROCESSOR_COMMAND);
+
+	pm_wakeup_event(priv->dev, 1000);
+	return IRQ_HANDLED;
+}
+
+static int olpc_apsp_open(struct serio *port)
+{
+	struct olpc_apsp *priv = port->port_data;
+	unsigned int tmp;
+
+	if (priv->open_count++ == 0) {
+		/* Enable interrupt 0 by clearing its bit */
+		tmp = readl(priv->base + PJ_INTERRUPT_MASK);
+		writel(tmp & ~INT_0, priv->base + PJ_INTERRUPT_MASK);
+	}
+
+	return 0;
+}
+
+static void olpc_apsp_close(struct serio *port)
+{
+	struct olpc_apsp *priv = port->port_data;
+	unsigned int tmp;
+
+	if (--priv->open_count == 0) {
+		/* Disable interrupt 0 */
+		tmp = readl(priv->base + PJ_INTERRUPT_MASK);
+		writel(tmp | INT_0, priv->base + PJ_INTERRUPT_MASK);
+	}
+}
+
+static int olpc_apsp_probe(struct platform_device *pdev)
+{
+	struct serio *kb_serio, *pad_serio;
+	struct olpc_apsp *priv;
+	struct resource *res;
+	struct device_node *np;
+	unsigned long l;
+	int error;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct olpc_apsp), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	np = pdev->dev.of_node;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base)) {
+		dev_err(&pdev->dev, "Failed to map WTM registers\n");
+		return PTR_ERR(priv->base);
+	}
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0)
+		return priv->irq;
+
+	l = readl(priv->base + COMMAND_FIFO_STATUS);
+	if (!(l & CMD_STS_MASK)) {
+		dev_err(&pdev->dev, "SP cannot accept commands.\n");
+		return -EIO;
+	}
+
+	/* KEYBOARD */
+	kb_serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!kb_serio)
+		return -ENOMEM;
+	kb_serio->id.type	= SERIO_8042_XL;
+	kb_serio->write		= olpc_apsp_write;
+	kb_serio->open		= olpc_apsp_open;
+	kb_serio->close		= olpc_apsp_close;
+	kb_serio->port_data	= priv;
+	kb_serio->dev.parent	= &pdev->dev;
+	strlcpy(kb_serio->name, "sp keyboard", sizeof(kb_serio->name));
+	strlcpy(kb_serio->phys, "sp/serio0", sizeof(kb_serio->phys));
+	priv->kbio		= kb_serio;
+	serio_register_port(kb_serio);
+
+	/* TOUCHPAD */
+	pad_serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!pad_serio) {
+		error = -ENOMEM;
+		goto err_pad;
+	}
+	pad_serio->id.type	= SERIO_8042;
+	pad_serio->write	= olpc_apsp_write;
+	pad_serio->open		= olpc_apsp_open;
+	pad_serio->close	= olpc_apsp_close;
+	pad_serio->port_data	= priv;
+	pad_serio->dev.parent	= &pdev->dev;
+	strlcpy(pad_serio->name, "sp touchpad", sizeof(pad_serio->name));
+	strlcpy(pad_serio->phys, "sp/serio1", sizeof(pad_serio->phys));
+	priv->padio		= pad_serio;
+	serio_register_port(pad_serio);
+
+	error = request_irq(priv->irq, olpc_apsp_rx, 0, "olpc-apsp", priv);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to request IRQ\n");
+		goto err_irq;
+	}
+
+	priv->dev = &pdev->dev;
+	device_init_wakeup(priv->dev, 1);
+	platform_set_drvdata(pdev, priv);
+
+	dev_dbg(&pdev->dev, "probed successfully.\n");
+	return 0;
+
+err_irq:
+	serio_unregister_port(pad_serio);
+err_pad:
+	serio_unregister_port(kb_serio);
+	return error;
+}
+
+static int olpc_apsp_remove(struct platform_device *pdev)
+{
+	struct olpc_apsp *priv = platform_get_drvdata(pdev);
+
+	free_irq(priv->irq, priv);
+
+	serio_unregister_port(priv->kbio);
+	serio_unregister_port(priv->padio);
+
+	return 0;
+}
+
+static struct of_device_id olpc_apsp_dt_ids[] = {
+	{ .compatible = "olpc,ap-sp", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, olpc_apsp_dt_ids);
+
+static struct platform_driver olpc_apsp_driver = {
+	.probe		= olpc_apsp_probe,
+	.remove		= olpc_apsp_remove,
+	.driver		= {
+		.name	= "olpc-apsp",
+		.owner	= THIS_MODULE,
+		.of_match_table = olpc_apsp_dt_ids,
+	},
+};
+
+MODULE_DESCRIPTION("OLPC AP-SP serio driver");
+MODULE_LICENSE("GPL");
+module_platform_driver(olpc_apsp_driver);

drivers/input/serio/q40kbd.c

···
 	free_irq(Q40_IRQ_KEYBOARD, q40kbd);
 	kfree(q40kbd);
 
-	platform_set_drvdata(pdev, NULL);
 	return 0;
 }
 

drivers/input/serio/xilinx_ps2.c

···
 
 	kfree(drvdata);
 
-	platform_set_drvdata(of_dev, NULL);
-
 	return 0;
 }
 

drivers/input/touchscreen/88pm860x-ts.c

···
 	touch = kzalloc(sizeof(struct pm860x_touch), GFP_KERNEL);
 	if (touch == NULL)
 		return -ENOMEM;
-	dev_set_drvdata(&pdev->dev, touch);
+	platform_set_drvdata(pdev, touch);
 
 	touch->idev = input_allocate_device();
 	if (touch->idev == NULL) {
···
 
 	input_unregister_device(touch->idev);
 	free_irq(touch->irq, touch);
-	platform_set_drvdata(pdev, NULL);
 	kfree(touch);
 	return 0;
 }

drivers/input/touchscreen/Kconfig

···
 	  To compile this driver as a module, choose M here: the
 	  module will be called cyttsp_spi.
 
+config TOUCHSCREEN_CYTTSP4_CORE
+	tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
+	help
+	  Core driver for Cypress TrueTouch(tm) Standard Product
+	  Generation4 touchscreen controllers.
+
+	  Say Y here if you have a Cypress Gen4 touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here.
+
+config TOUCHSCREEN_CYTTSP4_I2C
+	tristate "support I2C bus connection"
+	depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
+	help
+	  Say Y here if the touchscreen is connected via I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp4_i2c.
+
+config TOUCHSCREEN_CYTTSP4_SPI
+	tristate "support SPI bus connection"
+	depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
+	help
+	  Say Y here if the touchscreen is connected via SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp4_spi.
+
 config TOUCHSCREEN_DA9034
 	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 	depends on PMIC_DA903X
···
 config TOUCHSCREEN_TPS6507X
 	tristate "TPS6507x based touchscreens"
 	depends on I2C
+	select INPUT_POLLDEV
 	help
 	  Say Y here if you have a TPS6507x based touchscreen
 	  controller.

drivers/input/touchscreen/Makefile

···
 obj-$(CONFIG_TOUCHSCREEN_BU21013)	+= bu21013_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)	+= cyttsp_core.o
-obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o cyttsp_i2c_common.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI)	+= cyttsp_spi.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE)	+= cyttsp4_core.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C)	+= cyttsp4_i2c.o cyttsp_i2c_common.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI)	+= cyttsp4_spi.o
 obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
 obj-$(CONFIG_TOUCHSCREEN_DA9052)	+= da9052_tsi.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o

drivers/input/touchscreen/atmel-wm97xx.c

···
 err_irq:
 	free_irq(atmel_wm97xx->ac97c_irq, atmel_wm97xx);
 err:
-	platform_set_drvdata(pdev, NULL);
 	kfree(atmel_wm97xx);
 	return ret;
 }
···
 	free_irq(atmel_wm97xx->ac97c_irq, atmel_wm97xx);
 	del_timer_sync(&atmel_wm97xx->pen_timer);
 	wm97xx_unregister_mach_ops(wm);
-	platform_set_drvdata(pdev, NULL);
 	kfree(atmel_wm97xx);
 
 	return 0;

drivers/input/touchscreen/atmel_tsadcc.c

···
 	struct input_dev	*input_dev;
 	struct resource		*res;
 	struct at91_tsadcc_data *pdata = pdev->dev.platform_data;
-	int		err = 0;
+	int		err;
 	unsigned int	prsc;
 	unsigned int	reg;
+
+	if (!pdata)
+		return -EINVAL;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
···
 	prsc = clk_get_rate(ts_dev->clk);
 	dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc);
 
-	if (!pdata)
-		goto err_fail;
-
 	if (!pdata->adc_clock)
 		pdata->adc_clock = ADC_DEFAULT_CLOCK;
 
···
 
 static int atmel_tsadcc_remove(struct platform_device *pdev)
 {
-	struct atmel_tsadcc *ts_dev = dev_get_drvdata(&pdev->dev);
+	struct atmel_tsadcc *ts_dev = platform_get_drvdata(pdev);
 	struct resource *res;
 
 	free_irq(ts_dev->irq, ts_dev);

drivers/input/touchscreen/cyttsp4_core.c

···
+/*
+ * cyttsp4_core.c
+ * Cypress TrueTouch(TM) Standard Product V4 Core driver module.
+ * For use with Cypress Txx4xx parts.
+ * Supported parts include:
+ * TMA4XX
+ * TMA1036
+ *
+ * Copyright (C) 2012 Cypress Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <[e-mail]>
+ *
+ */
+
+#include "cyttsp4_core.h"
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+/* Timeout in ms. */
+#define CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT	500
+#define CY_CORE_SLEEP_REQUEST_EXCLUSIVE_TIMEOUT	5000
+#define CY_CORE_MODE_CHANGE_TIMEOUT		1000
+#define CY_CORE_RESET_AND_WAIT_TIMEOUT		500
+#define CY_CORE_WAKEUP_TIMEOUT			500
+
+#define CY_CORE_STARTUP_RETRY_COUNT		3
+
+static const u8 ldr_exit[] = {
+	0xFF, 0x01, 0x3B, 0x00, 0x00, 0x4F, 0x6D, 0x17
+};
+
+static const u8 ldr_err_app[] = {
+	0x01, 0x02, 0x00, 0x00, 0x55, 0xDD, 0x17
+};
+
+static inline size_t merge_bytes(u8 high, u8 low)
+{
+	return (high << 8) + low;
+}
+
+#ifdef VERBOSE_DEBUG
+static void cyttsp4_pr_buf(struct device *dev, u8 *pr_buf, u8 *dptr, int size,
+		const char *data_name)
+{
+	int i, k;
+	const char fmt[] = "%02X ";
+	int max;
+
+	if (!size)
+		return;
+
+	max = (CY_MAX_PRBUF_SIZE - 1) - sizeof(CY_PR_TRUNCATED);
+
+	pr_buf[0] = 0;
+	for (i = k = 0; i < size && k < max; i++, k += 3)
+		scnprintf(pr_buf + k, CY_MAX_PRBUF_SIZE, fmt, dptr[i]);
+
+	dev_vdbg(dev, "%s:  %s[0..%d]=%s%s\n", __func__, data_name, size - 1,
+			pr_buf, size <= max ? "" : CY_PR_TRUNCATED);
+}
+#else
+#define cyttsp4_pr_buf(dev, pr_buf, dptr, size, data_name) do { } while (0)
+#endif
+
+static int cyttsp4_load_status_regs(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	struct device *dev = cd->dev;
+	int rc;
+
+	rc = cyttsp4_adap_read(cd, CY_REG_BASE, si->si_ofs.mode_size,
+			si->xy_mode);
+	if (rc < 0)
+		dev_err(dev, "%s: fail read mode regs r=%d\n",
+			__func__, rc);
+	else
+		cyttsp4_pr_buf(dev, cd->pr_buf, si->xy_mode,
+			si->si_ofs.mode_size, "xy_mode");
+
+	return rc;
+}
+
+static int cyttsp4_handshake(struct cyttsp4 *cd, u8 mode)
+{
+	u8 cmd = mode ^ CY_HST_TOGGLE;
+	int rc;
+
+	/*
+	 * Mode change issued, handshaking now will cause endless mode change
+	 * requests, for sync mode modechange will do same with handshake
+	 * */
+	if (mode & CY_HST_MODE_CHANGE)
+		return 0;
+
+	rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(cmd), &cmd);
+	if (rc < 0)
+		dev_err(cd->dev, "%s: bus write fail on handshake (ret=%d)\n",
+				__func__, rc);
+
+	return rc;
+}
+
+static int cyttsp4_hw_soft_reset(struct cyttsp4 *cd)
+{
+	u8 cmd = CY_HST_RESET;
+	int rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(cmd), &cmd);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: FAILED to execute SOFT reset\n",
+				__func__);
+		return rc;
+	}
+	return 0;
+}
+
+static int cyttsp4_hw_hard_reset(struct cyttsp4 *cd)
+{
+	if (cd->cpdata->xres) {
+		cd->cpdata->xres(cd->cpdata, cd->dev);
+		dev_dbg(cd->dev, "%s: execute HARD reset\n", __func__);
+		return 0;
+	}
+	dev_err(cd->dev, "%s: FAILED to execute HARD reset\n", __func__);
+	return -ENOSYS;
+}
+
+static int cyttsp4_hw_reset(struct cyttsp4 *cd)
+{
+	int rc = cyttsp4_hw_hard_reset(cd);
+	if (rc == -ENOSYS)
+		rc = cyttsp4_hw_soft_reset(cd);
+	return rc;
+}
+
+/*
+ * Gets number of bits for a touch filed as parameter,
+ * sets maximum value for field which is used as bit mask
+ * and returns number of bytes required for that field
+ */
+static int cyttsp4_bits_2_bytes(unsigned int nbits, size_t *max)
+{
+	*max = 1UL << nbits;
+	return (nbits + 7) / 8;
+}
+
+static int cyttsp4_si_data_offsets(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	int rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(si->si_data),
+			&si->si_data);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail read sysinfo data offsets r=%d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	/* Print sysinfo data offsets */
+	cyttsp4_pr_buf(cd->dev, cd->pr_buf, (u8 *)&si->si_data,
+		       sizeof(si->si_data), "sysinfo_data_offsets");
+
+	/* convert sysinfo data offset bytes into integers */
+
+	si->si_ofs.map_sz = merge_bytes(si->si_data.map_szh,
+			si->si_data.map_szl);
+	si->si_ofs.map_sz = merge_bytes(si->si_data.map_szh,
+			si->si_data.map_szl);
+	si->si_ofs.cydata_ofs = merge_bytes(si->si_data.cydata_ofsh,
+			si->si_data.cydata_ofsl);
+	si->si_ofs.test_ofs = merge_bytes(si->si_data.test_ofsh,
+			si->si_data.test_ofsl);
+	si->si_ofs.pcfg_ofs = merge_bytes(si->si_data.pcfg_ofsh,
+			si->si_data.pcfg_ofsl);
+	si->si_ofs.opcfg_ofs = merge_bytes(si->si_data.opcfg_ofsh,
+			si->si_data.opcfg_ofsl);
+	si->si_ofs.ddata_ofs = merge_bytes(si->si_data.ddata_ofsh,
+			si->si_data.ddata_ofsl);
+	si->si_ofs.mdata_ofs = merge_bytes(si->si_data.mdata_ofsh,
+			si->si_data.mdata_ofsl);
+	return rc;
+}
+
+static int cyttsp4_si_get_cydata(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	int read_offset;
+	int mfgid_sz, calc_mfgid_sz;
+	void *p;
+	int rc;
+
+	si->si_ofs.cydata_size = si->si_ofs.test_ofs - si->si_ofs.cydata_ofs;
+	dev_dbg(cd->dev, "%s: cydata size: %Zd\n", __func__,
+			si->si_ofs.cydata_size);
+
+	p = krealloc(si->si_ptrs.cydata, si->si_ofs.cydata_size, GFP_KERNEL);
+	if (p == NULL) {
+		dev_err(cd->dev, "%s: fail alloc cydata memory\n", __func__);
+		return -ENOMEM;
+	}
+	si->si_ptrs.cydata = p;
+
+	read_offset = si->si_ofs.cydata_ofs;
+
+	/* Read the CYDA registers up to MFGID field */
+	rc = cyttsp4_adap_read(cd, read_offset,
+			offsetof(struct cyttsp4_cydata, mfgid_sz)
+				+ sizeof(si->si_ptrs.cydata->mfgid_sz),
+			si->si_ptrs.cydata);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail read cydata r=%d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	/* Check MFGID size */
+	mfgid_sz = si->si_ptrs.cydata->mfgid_sz;
+	calc_mfgid_sz = si->si_ofs.cydata_size - sizeof(struct cyttsp4_cydata);
+	if (mfgid_sz != calc_mfgid_sz) {
+		dev_err(cd->dev, "%s: mismatch in MFGID size, reported:%d calculated:%d\n",
+			__func__, mfgid_sz, calc_mfgid_sz);
+		return -EINVAL;
+	}
+
+	read_offset += offsetof(struct cyttsp4_cydata, mfgid_sz)
+			+ sizeof(si->si_ptrs.cydata->mfgid_sz);
+
+	/* Read the CYDA registers for MFGID field */
+	rc = cyttsp4_adap_read(cd, read_offset, si->si_ptrs.cydata->mfgid_sz,
+			si->si_ptrs.cydata->mfg_id);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail read cydata r=%d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	read_offset += si->si_ptrs.cydata->mfgid_sz;
+
+	/* Read the rest of the CYDA registers */
+	rc = cyttsp4_adap_read(cd, read_offset,
+			sizeof(struct cyttsp4_cydata)
+				- offsetof(struct cyttsp4_cydata, cyito_idh),
+			&si->si_ptrs.cydata->cyito_idh);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail read cydata r=%d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	cyttsp4_pr_buf(cd->dev, cd->pr_buf, (u8 *)si->si_ptrs.cydata,
+		si->si_ofs.cydata_size, "sysinfo_cydata");
+	return rc;
+}
+
+static int cyttsp4_si_get_test_data(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	void *p;
+	int rc;
+
+	si->si_ofs.test_size = si->si_ofs.pcfg_ofs - si->si_ofs.test_ofs;
+
+	p = krealloc(si->si_ptrs.test, si->si_ofs.test_size, GFP_KERNEL);
+	if (p == NULL) {
+		dev_err(cd->dev, "%s: fail alloc test memory\n", __func__);
+		return -ENOMEM;
+	}
+	si->si_ptrs.test = p;
+
+	rc = cyttsp4_adap_read(cd, si->si_ofs.test_ofs, si->si_ofs.test_size,
+			si->si_ptrs.test);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail read test data r=%d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	cyttsp4_pr_buf(cd->dev, cd->pr_buf,
+		       (u8 *)si->si_ptrs.test, si->si_ofs.test_size,
+		       "sysinfo_test_data");
+	if (si->si_ptrs.test->post_codel &
+	    CY_POST_CODEL_WDG_RST)
+		dev_info(cd->dev, "%s: %s codel=%02X\n",
+			 __func__, "Reset was a WATCHDOG RESET",
+			 si->si_ptrs.test->post_codel);
+
+	if (!(si->si_ptrs.test->post_codel &
+	      CY_POST_CODEL_CFG_DATA_CRC_FAIL))
+		dev_info(cd->dev, "%s: %s codel=%02X\n", __func__,
+			 "Config Data CRC FAIL",
+			 si->si_ptrs.test->post_codel);
+
+	if (!(si->si_ptrs.test->post_codel &
+	      CY_POST_CODEL_PANEL_TEST_FAIL))
+		dev_info(cd->dev, "%s: %s codel=%02X\n",
+			 __func__, "PANEL TEST FAIL",
+			 si->si_ptrs.test->post_codel);
+
+	dev_info(cd->dev, "%s: SCANNING is %s codel=%02X\n",
+		 __func__, si->si_ptrs.test->post_codel & 0x08 ?
+		 "ENABLED" : "DISABLED",
+		 si->si_ptrs.test->post_codel);
+	return rc;
+}
+
+static int cyttsp4_si_get_pcfg_data(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	void *p;
+	int rc;
+
+	si->si_ofs.pcfg_size = si->si_ofs.opcfg_ofs - si->si_ofs.pcfg_ofs;
+
+	p = krealloc(si->si_ptrs.pcfg, si->si_ofs.pcfg_size, GFP_KERNEL);
+	if (p == NULL) {
+		rc = -ENOMEM;
+		dev_err(cd->dev, "%s: fail alloc pcfg memory r=%d\n",
+			__func__, rc);
+		return rc;
+	}
+	si->si_ptrs.pcfg = p;
+
+	rc = cyttsp4_adap_read(cd, si->si_ofs.pcfg_ofs, si->si_ofs.pcfg_size,
+			si->si_ptrs.pcfg);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail read pcfg data r=%d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	si->si_ofs.max_x = merge_bytes((si->si_ptrs.pcfg->res_xh
+			& CY_PCFG_RESOLUTION_X_MASK), si->si_ptrs.pcfg->res_xl);
+	si->si_ofs.x_origin = !!(si->si_ptrs.pcfg->res_xh
+			& CY_PCFG_ORIGIN_X_MASK);
+	si->si_ofs.max_y = merge_bytes((si->si_ptrs.pcfg->res_yh
+			& CY_PCFG_RESOLUTION_Y_MASK), si->si_ptrs.pcfg->res_yl);
+	si->si_ofs.y_origin = !!(si->si_ptrs.pcfg->res_yh
+			& CY_PCFG_ORIGIN_Y_MASK);
+	si->si_ofs.max_p = merge_bytes(si->si_ptrs.pcfg->max_zh,
+			si->si_ptrs.pcfg->max_zl);
+
+	cyttsp4_pr_buf(cd->dev, cd->pr_buf,
+		       (u8 *)si->si_ptrs.pcfg,
+		       si->si_ofs.pcfg_size, "sysinfo_pcfg_data");
+	return rc;
+}
+
+static int cyttsp4_si_get_opcfg_data(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	struct cyttsp4_tch_abs_params *tch;
+	struct cyttsp4_tch_rec_params *tch_old, *tch_new;
+	enum cyttsp4_tch_abs abs;
+	int i;
+	void *p;
+	int rc;
+
+	si->si_ofs.opcfg_size = si->si_ofs.ddata_ofs - si->si_ofs.opcfg_ofs;
+
+	p = krealloc(si->si_ptrs.opcfg, si->si_ofs.opcfg_size, GFP_KERNEL);
+	if (p == NULL) {
+		dev_err(cd->dev, "%s: fail alloc opcfg memory\n", __func__);
+		rc = -ENOMEM;
+		goto cyttsp4_si_get_opcfg_data_exit;
+	}
+	si->si_ptrs.opcfg = p;
+
+	rc = cyttsp4_adap_read(cd, si->si_ofs.opcfg_ofs, si->si_ofs.opcfg_size,
+			si->si_ptrs.opcfg);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail read opcfg data r=%d\n",
+			__func__, rc);
+		goto cyttsp4_si_get_opcfg_data_exit;
+	}
+	si->si_ofs.cmd_ofs = si->si_ptrs.opcfg->cmd_ofs;
+	si->si_ofs.rep_ofs = si->si_ptrs.opcfg->rep_ofs;
+	si->si_ofs.rep_sz = (si->si_ptrs.opcfg->rep_szh * 256) +
+		si->si_ptrs.opcfg->rep_szl;
+	si->si_ofs.num_btns = si->si_ptrs.opcfg->num_btns;
+	si->si_ofs.num_btn_regs = (si->si_ofs.num_btns +
+		CY_NUM_BTN_PER_REG - 1) / CY_NUM_BTN_PER_REG;
+	si->si_ofs.tt_stat_ofs = si->si_ptrs.opcfg->tt_stat_ofs;
+	si->si_ofs.obj_cfg0 = si->si_ptrs.opcfg->obj_cfg0;
+	si->si_ofs.max_tchs = si->si_ptrs.opcfg->max_tchs &
+		CY_BYTE_OFS_MASK;
+	si->si_ofs.tch_rec_size = si->si_ptrs.opcfg->tch_rec_size &
+		CY_BYTE_OFS_MASK;
+
+	/* Get the old touch fields */
+	for (abs = CY_TCH_X; abs < CY_NUM_TCH_FIELDS; abs++) {
+		tch = &si->si_ofs.tch_abs[abs];
+		tch_old = &si->si_ptrs.opcfg->tch_rec_old[abs];
+
+		tch->ofs = tch_old->loc & CY_BYTE_OFS_MASK;
+		tch->size = cyttsp4_bits_2_bytes(tch_old->size,
+						 &tch->max);
+		tch->bofs = (tch_old->loc & CY_BOFS_MASK) >> CY_BOFS_SHIFT;
+	}
+
+	/* button fields */
+	si->si_ofs.btn_rec_size = si->si_ptrs.opcfg->btn_rec_size;
+	si->si_ofs.btn_diff_ofs = si->si_ptrs.opcfg->btn_diff_ofs;
+	si->si_ofs.btn_diff_size = si->si_ptrs.opcfg->btn_diff_size;
+
+	if (si->si_ofs.tch_rec_size > CY_TMA1036_TCH_REC_SIZE) {
+		/* Get the extended touch fields */
+		for (i = 0; i < CY_NUM_EXT_TCH_FIELDS; abs++, i++) {
+			tch = &si->si_ofs.tch_abs[abs];
+			tch_new = &si->si_ptrs.opcfg->tch_rec_new[i];
+
+			tch->ofs = tch_new->loc & CY_BYTE_OFS_MASK;
+			tch->size = cyttsp4_bits_2_bytes(tch_new->size,
+							 &tch->max);
+			tch->bofs = (tch_new->loc & CY_BOFS_MASK) >> CY_BOFS_SHIFT;
+		}
+	}
+
+	for (abs = 0; abs < CY_TCH_NUM_ABS; abs++) {
+		dev_dbg(cd->dev, "%s: tch_rec_%s\n", __func__,
+			cyttsp4_tch_abs_string[abs]);
+		dev_dbg(cd->dev, "%s:     ofs =%2Zd\n", __func__,
+			si->si_ofs.tch_abs[abs].ofs);
+		dev_dbg(cd->dev, "%s:     siz =%2Zd\n", __func__,
+			si->si_ofs.tch_abs[abs].size);
+		dev_dbg(cd->dev, "%s:     max =%2Zd\n", __func__,
+			si->si_ofs.tch_abs[abs].max);
+		dev_dbg(cd->dev, "%s:     bofs=%2Zd\n", __func__,
+			si->si_ofs.tch_abs[abs].bofs);
+	}
+
+	si->si_ofs.mode_size = si->si_ofs.tt_stat_ofs + 1;
+	si->si_ofs.data_size = si->si_ofs.max_tchs *
+		si->si_ptrs.opcfg->tch_rec_size;
+
+	cyttsp4_pr_buf(cd->dev, cd->pr_buf, (u8 *)si->si_ptrs.opcfg,
+		si->si_ofs.opcfg_size, "sysinfo_opcfg_data");
+
+cyttsp4_si_get_opcfg_data_exit:
+	return rc;
+}
+
+static int cyttsp4_si_get_ddata(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	void *p;
+	int rc;
+
+	si->si_ofs.ddata_size = si->si_ofs.mdata_ofs - si->si_ofs.ddata_ofs;
+
+	p = krealloc(si->si_ptrs.ddata, si->si_ofs.ddata_size, GFP_KERNEL);
+	if (p == NULL) {
+		dev_err(cd->dev, "%s: fail alloc ddata memory\n", __func__);
+		return -ENOMEM;
+	}
+	si->si_ptrs.ddata = p;
+
+	rc = cyttsp4_adap_read(cd, si->si_ofs.ddata_ofs, si->si_ofs.ddata_size,
+			si->si_ptrs.ddata);
+	if (rc < 0)
+		dev_err(cd->dev, "%s: fail read ddata data r=%d\n",
+			__func__, rc);
+	else
+		cyttsp4_pr_buf(cd->dev, cd->pr_buf,
+			       (u8 *)si->si_ptrs.ddata,
+			       si->si_ofs.ddata_size, "sysinfo_ddata");
+	return rc;
+}
+
+static int cyttsp4_si_get_mdata(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	void *p;
+	int rc;
+
+	si->si_ofs.mdata_size = si->si_ofs.map_sz - si->si_ofs.mdata_ofs;
+
+	p = krealloc(si->si_ptrs.mdata, si->si_ofs.mdata_size, GFP_KERNEL);
+	if (p == NULL) {
+		dev_err(cd->dev, "%s: fail alloc mdata memory\n", __func__);
+		return -ENOMEM;
+	}
+	si->si_ptrs.mdata = p;
+
+	rc = cyttsp4_adap_read(cd, si->si_ofs.mdata_ofs, si->si_ofs.mdata_size,
+			si->si_ptrs.mdata);
+	if (rc < 0)
+		dev_err(cd->dev, "%s: fail read mdata data r=%d\n",
+			__func__, rc);
+	else
+		cyttsp4_pr_buf(cd->dev, cd->pr_buf,
+			       (u8 *)si->si_ptrs.mdata,
+			       si->si_ofs.mdata_size, "sysinfo_mdata");
+	return rc;
+}
+
+static int cyttsp4_si_get_btn_data(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	int btn;
+	int num_defined_keys;
+	u16 *key_table;
+	void *p;
+	int rc = 0;
+
+	if (si->si_ofs.num_btns) {
+		si->si_ofs.btn_keys_size = si->si_ofs.num_btns *
+			sizeof(struct cyttsp4_btn);
+
+		p = krealloc(si->btn, si->si_ofs.btn_keys_size,
+				GFP_KERNEL|__GFP_ZERO);
+		if (p == NULL) {
+			dev_err(cd->dev, "%s: %s\n", __func__,
+				"fail alloc btn_keys memory");
+			return -ENOMEM;
+		}
+		si->btn = p;
+
+		if (cd->cpdata->sett[CY_IC_GRPNUM_BTN_KEYS] == NULL)
+			num_defined_keys = 0;
+		else if (cd->cpdata->sett[CY_IC_GRPNUM_BTN_KEYS]->data == NULL)
+			num_defined_keys = 0;
+		else
+			num_defined_keys = cd->cpdata->sett
+				[CY_IC_GRPNUM_BTN_KEYS]->size;
+
+		for (btn = 0; btn < si->si_ofs.num_btns &&
+			btn < num_defined_keys; btn++) {
+			key_table = (u16 *)cd->cpdata->sett
+				[CY_IC_GRPNUM_BTN_KEYS]->data;
+			si->btn[btn].key_code = key_table[btn];
+			si->btn[btn].state = CY_BTN_RELEASED;
+			si->btn[btn].enabled = true;
+		}
+		for (; btn < si->si_ofs.num_btns; btn++) {
+			si->btn[btn].key_code = KEY_RESERVED;
+			si->btn[btn].state = CY_BTN_RELEASED;
+			si->btn[btn].enabled = true;
+		}
+
+		return rc;
+	}
+
+	si->si_ofs.btn_keys_size = 0;
+	kfree(si->btn);
+	si->btn = NULL;
+	return rc;
+}
+
+static int cyttsp4_si_get_op_data_ptrs(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	void *p;
+
+	p = krealloc(si->xy_mode, si->si_ofs.mode_size, GFP_KERNEL|__GFP_ZERO);
+	if (p == NULL)
+		return -ENOMEM;
+	si->xy_mode = p;
+
+	p = krealloc(si->xy_data, si->si_ofs.data_size, GFP_KERNEL|__GFP_ZERO);
+	if (p == NULL)
+		return -ENOMEM;
+	si->xy_data = p;
+
+	p = krealloc(si->btn_rec_data,
+			si->si_ofs.btn_rec_size * si->si_ofs.num_btns,
+			GFP_KERNEL|__GFP_ZERO);
+	if (p == NULL)
+		return -ENOMEM;
+	si->btn_rec_data = p;
+
+	return 0;
+}
+
+static void cyttsp4_si_put_log_data(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	dev_dbg(cd->dev, "%s: cydata_ofs =%4Zd siz=%4Zd\n", __func__,
+		si->si_ofs.cydata_ofs, si->si_ofs.cydata_size);
+	dev_dbg(cd->dev, "%s: test_ofs   =%4Zd siz=%4Zd\n", __func__,
+		si->si_ofs.test_ofs, si->si_ofs.test_size);
+	dev_dbg(cd->dev, "%s: pcfg_ofs   =%4Zd siz=%4Zd\n", __func__,
+		si->si_ofs.pcfg_ofs, si->si_ofs.pcfg_size);
+	dev_dbg(cd->dev, "%s: opcfg_ofs  =%4Zd siz=%4Zd\n", __func__,
+		si->si_ofs.opcfg_ofs, si->si_ofs.opcfg_size);
+	dev_dbg(cd->dev, "%s: ddata_ofs  =%4Zd siz=%4Zd\n", __func__,
+		si->si_ofs.ddata_ofs, si->si_ofs.ddata_size);
+	dev_dbg(cd->dev, "%s: mdata_ofs  =%4Zd siz=%4Zd\n", __func__,
+		si->si_ofs.mdata_ofs, si->si_ofs.mdata_size);
+
+	dev_dbg(cd->dev, "%s: cmd_ofs       =%4Zd\n", __func__,
+		si->si_ofs.cmd_ofs);
+	dev_dbg(cd->dev, "%s: rep_ofs       =%4Zd\n", __func__,
+		si->si_ofs.rep_ofs);
+	dev_dbg(cd->dev, "%s: rep_sz        =%4Zd\n", __func__,
+		si->si_ofs.rep_sz);
+	dev_dbg(cd->dev, "%s: num_btns      =%4Zd\n", __func__,
+		si->si_ofs.num_btns);
+	dev_dbg(cd->dev, "%s: num_btn_regs  =%4Zd\n", __func__,
+		si->si_ofs.num_btn_regs);
+	dev_dbg(cd->dev, "%s: tt_stat_ofs   =%4Zd\n", __func__,
+		si->si_ofs.tt_stat_ofs);
+	dev_dbg(cd->dev, "%s: tch_rec_size  =%4Zd\n", __func__,
+		si->si_ofs.tch_rec_size);
+	dev_dbg(cd->dev, "%s: max_tchs      =%4Zd\n", __func__,
+		si->si_ofs.max_tchs);
+	dev_dbg(cd->dev, "%s: mode_size     =%4Zd\n", __func__,
+		si->si_ofs.mode_size);
+	dev_dbg(cd->dev, "%s: data_size     =%4Zd\n", __func__,
+		si->si_ofs.data_size);
+	dev_dbg(cd->dev, "%s: map_sz        =%4Zd\n", __func__,
+		si->si_ofs.map_sz);
+
+	dev_dbg(cd->dev, "%s: btn_rec_size   =%2Zd\n", __func__,
+		si->si_ofs.btn_rec_size);
+	dev_dbg(cd->dev, "%s: btn_diff_ofs   =%2Zd\n", __func__,
+		si->si_ofs.btn_diff_ofs);
+	dev_dbg(cd->dev, "%s: btn_diff_size  =%2Zd\n", __func__,
+		si->si_ofs.btn_diff_size);
+
+	dev_dbg(cd->dev, "%s: max_x    = 0x%04ZX (%Zd)\n", __func__,
+		si->si_ofs.max_x, si->si_ofs.max_x);
+	dev_dbg(cd->dev, "%s: x_origin = %Zd (%s)\n", __func__,
+		si->si_ofs.x_origin,
+		si->si_ofs.x_origin == CY_NORMAL_ORIGIN ?
+		"left corner" : "right corner");
+	dev_dbg(cd->dev, "%s: max_y    = 0x%04ZX (%Zd)\n", __func__,
+		si->si_ofs.max_y, si->si_ofs.max_y);
+	dev_dbg(cd->dev, "%s: y_origin = %Zd (%s)\n", __func__,
+		si->si_ofs.y_origin,
+		si->si_ofs.y_origin == CY_NORMAL_ORIGIN ?
+		"upper corner" : "lower corner");
+	dev_dbg(cd->dev, "%s: max_p    = 0x%04ZX (%Zd)\n", __func__,
+		si->si_ofs.max_p, si->si_ofs.max_p);
+
+	dev_dbg(cd->dev, "%s: xy_mode=%p xy_data=%p\n", __func__,
+		si->xy_mode, si->xy_data);
+}
+
+static int cyttsp4_get_sysinfo_regs(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	int rc;
+
+	rc = cyttsp4_si_data_offsets(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_cydata(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_test_data(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_pcfg_data(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_opcfg_data(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_ddata(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_mdata(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_btn_data(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_op_data_ptrs(cd);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: failed to get_op_data\n",
+			__func__);
+		return rc;
+	}
+
+	cyttsp4_si_put_log_data(cd);
+
+	/* provide flow control handshake */
+	rc = cyttsp4_handshake(cd, si->si_data.hst_mode);
+	if (rc < 0)
+		dev_err(cd->dev, "%s: handshake fail on sysinfo reg\n",
+			__func__);
+
+	si->ready = true;
+	return rc;
+}
+
+static void cyttsp4_queue_startup_(struct cyttsp4 *cd)
+{
+	if (cd->startup_state == STARTUP_NONE) {
+		cd->startup_state = STARTUP_QUEUED;
+		schedule_work(&cd->startup_work);
+		dev_dbg(cd->dev, "%s: cyttsp4_startup queued\n", __func__);
+	} else {
+		dev_dbg(cd->dev, "%s: startup_state = %d\n", __func__,
+			cd->startup_state);
+	}
+}
+
+static void cyttsp4_report_slot_liftoff(struct cyttsp4_mt_data *md,
+		int max_slots)
+{
+	int t;
+
+	if (md->num_prv_tch == 0)
+		return;
+
+	for (t = 0; t < max_slots; t++) {
+		input_mt_slot(md->input, t);
+		input_mt_report_slot_state(md->input,
+			MT_TOOL_FINGER, false);
+	}
+}
+
+static void cyttsp4_lift_all(struct cyttsp4_mt_data *md)
+{
+	if (!md->si)
+		return;
+
+	if (md->num_prv_tch != 0) {
+		cyttsp4_report_slot_liftoff(md,
+				md->si->si_ofs.tch_abs[CY_TCH_T].max);
+		input_sync(md->input);
+		md->num_prv_tch = 0;
+	}
+}
+
+static void cyttsp4_get_touch_axis(struct cyttsp4_mt_data *md,
+	int *axis, int size, int max, u8 *xy_data, int bofs)
+{
+	int nbyte;
+	int next;
+
+	for (nbyte = 0, *axis = 0, next = 0; nbyte < size; nbyte++) {
+		dev_vdbg(&md->input->dev,
+			"%s: *axis=%02X(%d) size=%d max=%08X xy_data=%p"
+			" xy_data[%d]=%02X(%d) bofs=%d\n",
+			__func__, *axis, *axis, size, max, xy_data, next,
+			xy_data[next], xy_data[next], bofs);
+		*axis = (*axis * 256) + (xy_data[next] >> bofs);
+		next++;
+	}
+
+	*axis &= max - 1;
+
+	dev_vdbg(&md->input->dev,
+		"%s: *axis=%02X(%d) size=%d max=%08X xy_data=%p"
+		" xy_data[%d]=%02X(%d)\n",
+		__func__, *axis, *axis, size, max, xy_data, next,
+		xy_data[next], xy_data[next]);
+}
+
+static void cyttsp4_get_touch(struct cyttsp4_mt_data *md,
+	struct cyttsp4_touch *touch, u8 *xy_data)
+{
+	struct device *dev = &md->input->dev;
+	struct cyttsp4_sysinfo *si = md->si;
+	enum cyttsp4_tch_abs abs;
+	int tmp;
+	bool flipped;
+
+	for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) {
+		cyttsp4_get_touch_axis(md, &touch->abs[abs],
+			si->si_ofs.tch_abs[abs].size,
+			si->si_ofs.tch_abs[abs].max,
+			xy_data + si->si_ofs.tch_abs[abs].ofs,
+			si->si_ofs.tch_abs[abs].bofs);
+		dev_vdbg(dev, "%s: get %s=%04X(%d)\n", __func__,
+			cyttsp4_tch_abs_string[abs],
+			touch->abs[abs], touch->abs[abs]);
+	}
+
+	if (md->pdata->flags & CY_FLAG_FLIP) {
+		tmp = touch->abs[CY_TCH_X];
+		touch->abs[CY_TCH_X] = touch->abs[CY_TCH_Y];
+		touch->abs[CY_TCH_Y] = tmp;
+		flipped = true;
+	} else
+		flipped = false;
+
+	if (md->pdata->flags & CY_FLAG_INV_X) {
+		if (flipped)
+			touch->abs[CY_TCH_X] = md->si->si_ofs.max_y -
+				touch->abs[CY_TCH_X];
+		else
+			touch->abs[CY_TCH_X] = md->si->si_ofs.max_x -
+				touch->abs[CY_TCH_X];
+	}
+	if (md->pdata->flags & CY_FLAG_INV_Y) {
+		if (flipped)
+			touch->abs[CY_TCH_Y] = md->si->si_ofs.max_x -
+				touch->abs[CY_TCH_Y];
+		else
+			touch->abs[CY_TCH_Y] = md->si->si_ofs.max_y -
+				touch->abs[CY_TCH_Y];
+	}
+
+	dev_vdbg(dev, "%s: flip=%s inv-x=%s inv-y=%s x=%04X(%d) y=%04X(%d)\n",
+		__func__, flipped ? "true" : "false",
+		md->pdata->flags & CY_FLAG_INV_X ? "true" : "false",
+		md->pdata->flags & CY_FLAG_INV_Y ? "true" : "false",
+		touch->abs[CY_TCH_X], touch->abs[CY_TCH_X],
+		touch->abs[CY_TCH_Y], touch->abs[CY_TCH_Y]);
+}
+
+static void cyttsp4_final_sync(struct input_dev *input, int max_slots, int *ids)
+{
+	int t;
+
+	for (t = 0; t < max_slots; t++) {
+		if (ids[t])
+			continue;
+		input_mt_slot(input, t);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
+	}
+
+	input_sync(input);
+}
+
+static void cyttsp4_get_mt_touches(struct cyttsp4_mt_data *md, int num_cur_tch)
+{
+	struct device *dev = &md->input->dev;
+	struct cyttsp4_sysinfo *si = md->si;
+	struct cyttsp4_touch tch;
+	int sig;
+	int i, j, t = 0;
+	int ids[max(CY_TMA1036_MAX_TCH, CY_TMA4XX_MAX_TCH)];
+
+	memset(ids, 0, si->si_ofs.tch_abs[CY_TCH_T].max * sizeof(int));
+	for (i = 0; i < num_cur_tch; i++) {
+		cyttsp4_get_touch(md, &tch, si->xy_data +
+			(i * si->si_ofs.tch_rec_size));
+		if ((tch.abs[CY_TCH_T] < md->pdata->frmwrk->abs
+			[(CY_ABS_ID_OST * CY_NUM_ABS_SET) + CY_MIN_OST]) ||
+			(tch.abs[CY_TCH_T] > md->pdata->frmwrk->abs
+			[(CY_ABS_ID_OST * CY_NUM_ABS_SET) + CY_MAX_OST])) {
+			dev_err(dev, "%s: tch=%d -> bad trk_id=%d max_id=%d\n",
+				__func__, i, tch.abs[CY_TCH_T],
+				md->pdata->frmwrk->abs[(CY_ABS_ID_OST *
+				CY_NUM_ABS_SET) + CY_MAX_OST]);
+			continue;
+		}
+
+		/* use 0 based track id's */
+		sig = md->pdata->frmwrk->abs
+			[(CY_ABS_ID_OST * CY_NUM_ABS_SET) + 0];
+		if (sig != CY_IGNORE_VALUE) {
+			t = tch.abs[CY_TCH_T] - md->pdata->frmwrk->abs
+				[(CY_ABS_ID_OST * CY_NUM_ABS_SET) + CY_MIN_OST];
+			if (tch.abs[CY_TCH_E] == CY_EV_LIFTOFF) {
+				dev_dbg(dev, "%s: t=%d e=%d lift-off\n",
+					__func__, t, tch.abs[CY_TCH_E]);
+				goto cyttsp4_get_mt_touches_pr_tch;
+			}
+			input_mt_slot(md->input, t);
+			input_mt_report_slot_state(md->input, MT_TOOL_FINGER,
+					true);
+			ids[t] = true;
+		}
+
+		/* all devices: position and pressure fields */
+		for (j = 0; j <= CY_ABS_W_OST; j++) {
+			sig = md->pdata->frmwrk->abs[((CY_ABS_X_OST + j) *
+				CY_NUM_ABS_SET) + 0];
+			if (sig != CY_IGNORE_VALUE)
+				input_report_abs(md->input, sig,
+					tch.abs[CY_TCH_X + j]);
+		}
+		if (si->si_ofs.tch_rec_size > CY_TMA1036_TCH_REC_SIZE) {
+			/*
+			 * TMA400 size and orientation fields:
+			 * if pressure is non-zero and major touch
+			 * signal is zero, then set major and minor touch
+			 * signals to minimum non-zero value
+			 */
+			if (tch.abs[CY_TCH_P] > 0 && tch.abs[CY_TCH_MAJ] == 0)
+				tch.abs[CY_TCH_MAJ] = tch.abs[CY_TCH_MIN] = 1;
+
+			/* Get the extended touch fields */
+			for (j = 0; j < CY_NUM_EXT_TCH_FIELDS; j++) {
+				sig = md->pdata->frmwrk->abs
+					[((CY_ABS_MAJ_OST + j) *
+					CY_NUM_ABS_SET) + 0];
+				if (sig != CY_IGNORE_VALUE)
+					input_report_abs(md->input, sig,
+						tch.abs[CY_TCH_MAJ + j]);
+			}
+		}
+
+cyttsp4_get_mt_touches_pr_tch:
+		if (si->si_ofs.tch_rec_size > CY_TMA1036_TCH_REC_SIZE)
+			dev_dbg(dev,
+				"%s: t=%d x=%d y=%d z=%d M=%d m=%d o=%d e=%d\n",
+				__func__, t,
+				tch.abs[CY_TCH_X],
+				tch.abs[CY_TCH_Y],
+				tch.abs[CY_TCH_P],
+				tch.abs[CY_TCH_MAJ],
+				tch.abs[CY_TCH_MIN],
+				tch.abs[CY_TCH_OR],
+				tch.abs[CY_TCH_E]);
+		else
+			dev_dbg(dev,
+				"%s: t=%d x=%d y=%d z=%d e=%d\n", __func__,
+				t,
+				tch.abs[CY_TCH_X],
+				tch.abs[CY_TCH_Y],
+				tch.abs[CY_TCH_P],
+				tch.abs[CY_TCH_E]);
+	}
+
+	cyttsp4_final_sync(md->input, si->si_ofs.tch_abs[CY_TCH_T].max, ids);
+
+	md->num_prv_tch = num_cur_tch;
+
+	return;
+}
+
+/* read xy_data for all current touches */
+static int cyttsp4_xy_worker(struct cyttsp4 *cd)
+{
+	struct cyttsp4_mt_data *md = &cd->md;
+	struct device *dev = &md->input->dev;
+	struct cyttsp4_sysinfo *si = md->si;
+	u8 num_cur_tch;
+	u8 hst_mode;
+	u8 rep_len;
+	u8 rep_stat;
+	u8 tt_stat;
+	int rc = 0;
+
+	/*
+	 * Get event data from cyttsp4 device.
+	 * The event data includes all data
+	 * for all active touches.
+	 * Event data also includes button data
+	 */
+	/*
+	 * Use 2 reads:
+	 * 1st read to get mode + button bytes + touch count (core)
+	 * 2nd read (optional) to get touch 1 - touch n data
+	 */
+	hst_mode = si->xy_mode[CY_REG_BASE];
+	rep_len = si->xy_mode[si->si_ofs.rep_ofs];
+	rep_stat = si->xy_mode[si->si_ofs.rep_ofs + 1];
+	tt_stat = si->xy_mode[si->si_ofs.tt_stat_ofs];
+	dev_vdbg(dev, "%s: %s%02X %s%d %s%02X %s%02X\n", __func__,
+		"hst_mode=", hst_mode, "rep_len=", rep_len,
+		"rep_stat=", rep_stat, "tt_stat=", tt_stat);
+
+	num_cur_tch = GET_NUM_TOUCHES(tt_stat);
+	dev_vdbg(dev, "%s: num_cur_tch=%d\n", __func__, num_cur_tch);
+
+	if (rep_len == 0 && num_cur_tch > 0) {
+		dev_err(dev, "%s: report length error rep_len=%d num_tch=%d\n",
+			__func__, rep_len, num_cur_tch);
+		goto cyttsp4_xy_worker_exit;
+	}
+
+	/* read touches */
+	if (num_cur_tch > 0) {
+		rc = cyttsp4_adap_read(cd, si->si_ofs.tt_stat_ofs + 1,
+				num_cur_tch * si->si_ofs.tch_rec_size,
+				si->xy_data);
+		if (rc < 0) {
+			dev_err(dev, "%s: read fail on touch regs r=%d\n",
+				__func__, rc);
+			goto cyttsp4_xy_worker_exit;
+		}
+	}
+
+	/* print xy data */
+	cyttsp4_pr_buf(dev, cd->pr_buf, si->xy_data, num_cur_tch *
+		si->si_ofs.tch_rec_size, "xy_data");
+
+	/* check any error conditions */
+	if (IS_BAD_PKT(rep_stat)) {
+		dev_dbg(dev, "%s: Invalid buffer detected\n", __func__);
+		rc = 0;
+		goto cyttsp4_xy_worker_exit;
+	}
+
+	if (IS_LARGE_AREA(tt_stat))
+		dev_dbg(dev, "%s: Large area detected\n", __func__);
+
+	if (num_cur_tch > si->si_ofs.max_tchs) {
+		dev_err(dev, "%s: too many tch; set to max tch (n=%d c=%Zd)\n",
+				__func__, num_cur_tch, si->si_ofs.max_tchs);
+		num_cur_tch = si->si_ofs.max_tchs;
+	}
+
+	/* extract xy_data for all currently reported touches */
+	dev_vdbg(dev, "%s: extract data num_cur_tch=%d\n", __func__,
+		num_cur_tch);
+	if (num_cur_tch)
+		cyttsp4_get_mt_touches(md, num_cur_tch);
+	else
+		cyttsp4_lift_all(md);
+
+	rc = 0;
+
+cyttsp4_xy_worker_exit:
+	return rc;
+}
+
+static int cyttsp4_mt_attention(struct cyttsp4 *cd)
+{
+	struct device *dev = cd->dev;
+	struct cyttsp4_mt_data *md = &cd->md;
+	int rc = 0;
+
+	if (!md->si)
+		return 0;
+
+	mutex_lock(&md->report_lock);
+	if (!md->is_suspended) {
+		/* core handles handshake */
+		rc = cyttsp4_xy_worker(cd);
+	} else {
+		dev_vdbg(dev, "%s: Ignoring report while suspended\n",
+			__func__);
+	}
+	mutex_unlock(&md->report_lock);
+	if (rc < 0)
+		dev_err(dev, "%s: xy_worker error r=%d\n", __func__, rc);
+
+	return rc;
+}
+
+static irqreturn_t cyttsp4_irq(int irq, void *handle)
+{
+	struct cyttsp4 *cd = handle;
+	struct device *dev = cd->dev;
+	enum cyttsp4_mode cur_mode;
+	u8 cmd_ofs = cd->sysinfo.si_ofs.cmd_ofs;
+	u8 mode[3];
+	int rc;
+
+	/*
+	 * Check whether this IRQ should be ignored (external)
+	 * This should be the very first thing to check since
+	 * ignore_irq may be set for a very short period of time
+	 */
+	if (atomic_read(&cd->ignore_irq)) {
+		dev_vdbg(dev, "%s: Ignoring IRQ\n", __func__);
+		return IRQ_HANDLED;
+	}
+
+	dev_dbg(dev, "%s int:0x%x\n", __func__, cd->int_status);
+
+	mutex_lock(&cd->system_lock);
+
+	/* Just to debug */
+	if (cd->sleep_state == SS_SLEEP_ON || cd->sleep_state == SS_SLEEPING)
+		dev_vdbg(dev, "%s: Received IRQ while in sleep\n", __func__);
+
+	rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), mode);
+	if (rc) {
+		dev_err(cd->dev, "%s: Fail read adapter r=%d\n", __func__, rc);
+		goto cyttsp4_irq_exit;
+	}
+	dev_vdbg(dev, "%s mode[0-2]:0x%X 0x%X 0x%X\n", __func__,
+			mode[0], mode[1], mode[2]);
+
+	if (IS_BOOTLOADER(mode[0], mode[1])) {
+		cur_mode = CY_MODE_BOOTLOADER;
+		dev_vdbg(dev, "%s: bl running\n", __func__);
+		if (cd->mode == CY_MODE_BOOTLOADER) {
+			/* Signal bootloader heartbeat heard */
+			wake_up(&cd->wait_q);
+			goto cyttsp4_irq_exit;
+		}
+
+		/* switch to bootloader */
+		dev_dbg(dev, "%s: restart switch to bl m=%d -> m=%d\n",
+			__func__, cd->mode, cur_mode);
+
+		/* catch operation->bl glitch */
+		if (cd->mode != CY_MODE_UNKNOWN) {
+			/* Incase startup_state do not let startup_() */
+			cd->mode = CY_MODE_UNKNOWN;
+			cyttsp4_queue_startup_(cd);
+			goto cyttsp4_irq_exit;
+		}
+
+		/*
+		 * do not wake thread on this switch since
+		 * it is possible to get an early heartbeat
+		 * prior to performing the reset
+		 */
+		cd->mode = cur_mode;
+
+		goto cyttsp4_irq_exit;
+	}
+
+	switch (mode[0] & CY_HST_MODE) {
+	case CY_HST_OPERATE:
+		cur_mode = CY_MODE_OPERATIONAL;
+		dev_vdbg(dev, "%s: operational\n", __func__);
+		break;
+	case CY_HST_CAT:
+		cur_mode = CY_MODE_CAT;
+		dev_vdbg(dev, "%s: CaT\n", __func__);
+		break;
+	case CY_HST_SYSINFO:
+		cur_mode = CY_MODE_SYSINFO;
+		dev_vdbg(dev, "%s: sysinfo\n", __func__);
+		break;
+	default:
+		cur_mode = CY_MODE_UNKNOWN;
+		dev_err(dev, "%s: unknown HST mode 0x%02X\n", __func__,
+			mode[0]);
+		break;
+	}
+
+	/* Check whether this IRQ should be ignored (internal) */
+	if (cd->int_status & CY_INT_IGNORE) {
+		dev_vdbg(dev, "%s: Ignoring IRQ\n", __func__);
+		goto cyttsp4_irq_exit;
+	}
+
+	/* Check for wake up interrupt */
+	if (cd->int_status & CY_INT_AWAKE) {
+		cd->int_status &= ~CY_INT_AWAKE;
+		wake_up(&cd->wait_q);
+		dev_vdbg(dev, "%s: Received wake up interrupt\n", __func__);
+		goto cyttsp4_irq_handshake;
+	}
+
+	/* Expecting mode change interrupt */
+	if ((cd->int_status & CY_INT_MODE_CHANGE)
+			&& (mode[0] & CY_HST_MODE_CHANGE) == 0) {
+		cd->int_status &= ~CY_INT_MODE_CHANGE;
+		dev_dbg(dev, "%s: finish mode switch m=%d -> m=%d\n",
+				__func__, cd->mode, cur_mode);
+		cd->mode = cur_mode;
+		wake_up(&cd->wait_q);
+		goto cyttsp4_irq_handshake;
+	}
+
+	/* compare current core mode to current device mode */
+	dev_vdbg(dev, "%s: cd->mode=%d cur_mode=%d\n",
+			__func__, cd->mode, cur_mode);
+	if ((mode[0] & CY_HST_MODE_CHANGE) == 0 && cd->mode != cur_mode) {
+		/* Unexpected mode change occurred */
+		dev_err(dev, "%s %d->%d 0x%x\n", __func__, cd->mode,
+				cur_mode, cd->int_status);
+		dev_dbg(dev, "%s: Unexpected mode change, startup\n",
+				__func__);
+		cyttsp4_queue_startup_(cd);
+		goto cyttsp4_irq_exit;
+	}
+
+	/* Expecting command complete interrupt */
+	dev_vdbg(dev, "%s: command byte:0x%x\n", __func__, mode[cmd_ofs]);
+	if ((cd->int_status & CY_INT_EXEC_CMD)
+			&& mode[cmd_ofs] & CY_CMD_COMPLETE) {
+		cd->int_status &= ~CY_INT_EXEC_CMD;
+		dev_vdbg(dev, "%s: Received command complete interrupt\n",
+				__func__);
+		wake_up(&cd->wait_q);
+		/*
+		 * It is possible to receive a single interrupt for
+		 * command complete and touch/button status report.
+		 * Continue processing for a possible status report.
+		 */
+	}
+
+	/* This should be status report, read status regs */
+	if (cd->mode == CY_MODE_OPERATIONAL) {
+		dev_vdbg(dev, "%s: Read status registers\n", __func__);
+		rc = cyttsp4_load_status_regs(cd);
+		if (rc < 0)
+			dev_err(dev, "%s: fail read mode regs r=%d\n",
+				__func__, rc);
+	}
+
+	cyttsp4_mt_attention(cd);
+
+cyttsp4_irq_handshake:
+	/* handshake the event */
+	dev_vdbg(dev, "%s: Handshake mode=0x%02X r=%d\n",
+			__func__, mode[0], rc);
+	rc = cyttsp4_handshake(cd, mode[0]);
+	if (rc < 0)
+		dev_err(dev, "%s: Fail handshake mode=0x%02X r=%d\n",
+				__func__, mode[0], rc);
+
+	/*
+	 * a non-zero udelay period is required for using
+	 * IRQF_TRIGGER_LOW in order to delay until the
+	 * device completes isr deassert
+	 */
+	udelay(cd->cpdata->level_irq_udelay);
+
+cyttsp4_irq_exit:
+	mutex_unlock(&cd->system_lock);
+	return IRQ_HANDLED;
+}
+
+static void cyttsp4_start_wd_timer(struct cyttsp4 *cd)
+{
+	if (!CY_WATCHDOG_TIMEOUT)
+		return;
+
+	mod_timer(&cd->watchdog_timer, jiffies +
+			msecs_to_jiffies(CY_WATCHDOG_TIMEOUT));
+}
+
+static void cyttsp4_stop_wd_timer(struct cyttsp4 *cd)
+{
+	if (!CY_WATCHDOG_TIMEOUT)
+		return;
+
+	/*
+	 * Ensure we wait until the watchdog timer
+	 * running on a different CPU finishes
+	 */
+	del_timer_sync(&cd->watchdog_timer);
+	cancel_work_sync(&cd->watchdog_work);
+	del_timer_sync(&cd->watchdog_timer);
+}
+
+static void cyttsp4_watchdog_timer(unsigned long handle)
+{
+	struct cyttsp4 *cd = (struct cyttsp4 *)handle;
+
+	dev_vdbg(cd->dev, "%s: Watchdog timer triggered\n", __func__);
+
+	if (!cd)
+		return;
+
+	if (!work_pending(&cd->watchdog_work))
+		schedule_work(&cd->watchdog_work);
+
+	return;
+}
+
+static int cyttsp4_request_exclusive(struct cyttsp4 *cd, void *ownptr,
+		int timeout_ms)
+{
+	int t = msecs_to_jiffies(timeout_ms);
+	bool with_timeout = (timeout_ms != 0);
+
+	mutex_lock(&cd->system_lock);
+	if (!cd->exclusive_dev && cd->exclusive_waits == 0) {
+		cd->exclusive_dev = ownptr;
+		goto exit;
+	}
+
+	cd->exclusive_waits++;
+wait:
+	mutex_unlock(&cd->system_lock);
+	if (with_timeout) {
+		t = wait_event_timeout(cd->wait_q, !cd->exclusive_dev, t);
+		if (IS_TMO(t)) {
+			dev_err(cd->dev, "%s: tmo waiting exclusive access\n",
+				__func__);
+			mutex_lock(&cd->system_lock);
+			cd->exclusive_waits--;
+			mutex_unlock(&cd->system_lock);
+			return -ETIME;
+		}
+	} else {
+		wait_event(cd->wait_q, !cd->exclusive_dev);
+	}
+	mutex_lock(&cd->system_lock);
+	if (cd->exclusive_dev)
+		goto wait;
+	cd->exclusive_dev = ownptr;
+	cd->exclusive_waits--;
+exit:
+	mutex_unlock(&cd->system_lock);
+
+	return 0;
+}
+
+/*
+ * returns error if was not owned
+ */
+static int cyttsp4_release_exclusive(struct cyttsp4 *cd, void *ownptr)
+{
+	mutex_lock(&cd->system_lock);
+	if (cd->exclusive_dev != ownptr) {
+		mutex_unlock(&cd->system_lock);
+		return -EINVAL;
+	}
+
+	dev_vdbg(cd->dev, "%s: exclusive_dev %p freed\n",
+		__func__, cd->exclusive_dev);
+	cd->exclusive_dev = NULL;
+	wake_up(&cd->wait_q);
+	mutex_unlock(&cd->system_lock);
+	return 0;
+}
+
+static int cyttsp4_wait_bl_heartbeat(struct cyttsp4 *cd)
+{
+	long t;
+	int rc = 0;
+
+	/* wait heartbeat */
+	dev_vdbg(cd->dev, "%s: wait heartbeat...\n", __func__);
+	t = wait_event_timeout(cd->wait_q, cd->mode == CY_MODE_BOOTLOADER,
+			msecs_to_jiffies(CY_CORE_RESET_AND_WAIT_TIMEOUT));
+	if (IS_TMO(t)) {
+		dev_err(cd->dev, "%s: tmo waiting bl heartbeat cd->mode=%d\n",
+			__func__, cd->mode);
+		rc = -ETIME;
+	}
+
+	return rc;
+}
+
+static int cyttsp4_wait_sysinfo_mode(struct cyttsp4 *cd)
+{
+	long t;
+
+	dev_vdbg(cd->dev, "%s: wait sysinfo...\n", __func__);
+
+	t = wait_event_timeout(cd->wait_q, cd->mode == CY_MODE_SYSINFO,
+			msecs_to_jiffies(CY_CORE_MODE_CHANGE_TIMEOUT));
+	if (IS_TMO(t)) {
+		dev_err(cd->dev, "%s: tmo waiting exit bl cd->mode=%d\n",
+			__func__, cd->mode);
+		mutex_lock(&cd->system_lock);
+		cd->int_status &= ~CY_INT_MODE_CHANGE;
+		mutex_unlock(&cd->system_lock);
+		return -ETIME;
+	}
+
+	return 0;
+}
+
+static int cyttsp4_reset_and_wait(struct cyttsp4 *cd)
+{
+	int rc;
+
+	/* reset hardware */
+	mutex_lock(&cd->system_lock);
+	dev_dbg(cd->dev, "%s: reset hw...\n", __func__);
+	rc = cyttsp4_hw_reset(cd);
+	cd->mode = CY_MODE_UNKNOWN;
+	mutex_unlock(&cd->system_lock);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s:Fail hw reset r=%d\n", __func__, rc);
+		return rc;
+	}
+
+	return cyttsp4_wait_bl_heartbeat(cd);
+}
+
+/*
+ * returns err if refused or timeout; block until mode change complete
+ * bit is set (mode change interrupt)
+ */
+static int cyttsp4_set_mode(struct cyttsp4 *cd, int new_mode)
+{
+	u8 new_dev_mode;
+	u8 mode;
+	long t;
+	int rc;
+
+	switch (new_mode) {
+	case CY_MODE_OPERATIONAL:
+		new_dev_mode = CY_HST_OPERATE;
+		break;
+	case CY_MODE_SYSINFO:
+		new_dev_mode = CY_HST_SYSINFO;
+		break;
+	case CY_MODE_CAT:
+		new_dev_mode = CY_HST_CAT;
+		break;
+	default:
+		dev_err(cd->dev, "%s: invalid mode: %02X(%d)\n",
+			__func__, new_mode, new_mode);
+		return -EINVAL;
+	}
+
+	/* change mode */
+	dev_dbg(cd->dev, "%s: %s=%p new_dev_mode=%02X new_mode=%d\n",
+			__func__, "have exclusive", cd->exclusive_dev,
+			new_dev_mode, new_mode);
+
+	mutex_lock(&cd->system_lock);
+	rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode);
+	if (rc < 0) {
+		mutex_unlock(&cd->system_lock);
+		dev_err(cd->dev, "%s: Fail read mode r=%d\n",
+			__func__, rc);
+		goto exit;
+	}
+
+	/* Clear device mode bits and set to new mode */
+	mode &= ~CY_HST_MODE;
+	mode |= new_dev_mode | CY_HST_MODE_CHANGE;
+
+	cd->int_status |= CY_INT_MODE_CHANGE;
+	rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(mode), &mode);
+	mutex_unlock(&cd->system_lock);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: Fail write mode change r=%d\n",
+				__func__, rc);
+		goto exit;
+	}
+
+	/* wait for mode change done interrupt */
+	t = wait_event_timeout(cd->wait_q,
+			(cd->int_status & CY_INT_MODE_CHANGE) == 0,
+			msecs_to_jiffies(CY_CORE_MODE_CHANGE_TIMEOUT));
+	dev_dbg(cd->dev, "%s: back from wait t=%ld cd->mode=%d\n",
+			__func__, t, cd->mode);
+
+	if (IS_TMO(t)) {
+		dev_err(cd->dev, "%s: %s\n", __func__,
+				"tmo waiting mode change");
+		mutex_lock(&cd->system_lock);
+		cd->int_status &= ~CY_INT_MODE_CHANGE;
+		mutex_unlock(&cd->system_lock);
+		rc = -EINVAL;
+	}
+
+exit:
+	return rc;
+}
+
+static void cyttsp4_watchdog_work(struct work_struct *work)
+{
+	struct cyttsp4 *cd =
+		container_of(work, struct cyttsp4, watchdog_work);
+	u8 *mode;
+	int retval;
+
+	mutex_lock(&cd->system_lock);
+	retval = cyttsp4_load_status_regs(cd);
+	if (retval < 0) {
+		dev_err(cd->dev,
+			"%s: failed to access device in watchdog timer r=%d\n",
+			__func__, retval);
+		cyttsp4_queue_startup_(cd);
+		goto cyttsp4_timer_watchdog_exit_error;
+	}
+	mode = &cd->sysinfo.xy_mode[CY_REG_BASE];
+	if (IS_BOOTLOADER(mode[0], mode[1])) {
+		dev_err(cd->dev,
+			"%s: device found in bootloader mode when operational mode\n",
+			__func__);
+		cyttsp4_queue_startup_(cd);
+		goto cyttsp4_timer_watchdog_exit_error;
+	}
+
+	cyttsp4_start_wd_timer(cd);
+cyttsp4_timer_watchdog_exit_error:
+	mutex_unlock(&cd->system_lock);
+	return;
+}
+
+static int cyttsp4_core_sleep_(struct cyttsp4 *cd)
+{
+	enum cyttsp4_sleep_state ss = SS_SLEEP_ON;
+	enum cyttsp4_int_state int_status = CY_INT_IGNORE;
+	int rc = 0;
+	u8 mode[2];
+
+	/* Already in sleep mode? */
+	mutex_lock(&cd->system_lock);
+	if (cd->sleep_state == SS_SLEEP_ON) {
+		mutex_unlock(&cd->system_lock);
+		return 0;
+	}
+	cd->sleep_state = SS_SLEEPING;
+	mutex_unlock(&cd->system_lock);
+
+	cyttsp4_stop_wd_timer(cd);
+
+	/* Wait until currently running IRQ handler exits and disable IRQ */
+	disable_irq(cd->irq);
+
+	dev_vdbg(cd->dev, "%s: write DEEP SLEEP...\n", __func__);
+	mutex_lock(&cd->system_lock);
+	rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode);
+	if (rc) {
+		mutex_unlock(&cd->system_lock);
+		dev_err(cd->dev, "%s: Fail read adapter r=%d\n", __func__, rc);
+		goto error;
+	}
+
+	if (IS_BOOTLOADER(mode[0], mode[1])) {
+		mutex_unlock(&cd->system_lock);
+		dev_err(cd->dev, "%s: Device in BOOTLADER mode.\n", __func__);
+		rc = -EINVAL;
+		goto error;
+	}
+
+	mode[0] |= CY_HST_SLEEP;
+	rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(mode[0]), &mode[0]);
+	mutex_unlock(&cd->system_lock);
+	if (rc) {
+		dev_err(cd->dev, "%s: Fail write adapter r=%d\n", __func__, rc);
+		goto error;
+	}
+	dev_vdbg(cd->dev, "%s: write DEEP SLEEP succeeded\n", __func__);
+
+	if (cd->cpdata->power) {
+		dev_dbg(cd->dev, "%s: Power down HW\n", __func__);
+		rc = cd->cpdata->power(cd->cpdata, 0, cd->dev, &cd->ignore_irq);
+	} else {
+		dev_dbg(cd->dev, "%s: No power function\n", __func__);
+		rc = 0;
+	}
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: HW Power down fails r=%d\n",
+				__func__, rc);
+		goto error;
+	}
+
+	/* Give time to FW to sleep */
+	msleep(50);
+
+	goto exit;
+
+error:
+	ss = SS_SLEEP_OFF;
+	int_status = CY_INT_NONE;
+	cyttsp4_start_wd_timer(cd);
+
+exit:
+	mutex_lock(&cd->system_lock);
+	cd->sleep_state = ss;
+	cd->int_status |= int_status;
+	mutex_unlock(&cd->system_lock);
+	enable_irq(cd->irq);
+	return rc;
+}
+
+static int cyttsp4_core_sleep(struct cyttsp4 *cd)
+{
+	int rc;
+
+	rc = cyttsp4_request_exclusive(cd, cd->dev,
+			CY_CORE_SLEEP_REQUEST_EXCLUSIVE_TIMEOUT);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n",
+				__func__, cd->exclusive_dev, cd->dev);
+		return 0;
+	}
+
+	rc = cyttsp4_core_sleep_(cd);
+
+	if (cyttsp4_release_exclusive(cd, cd->dev) < 0)
+		dev_err(cd->dev, "%s: fail to release exclusive\n", __func__);
+	else
+		dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__);
+
+	return rc;
+}
+
+static int cyttsp4_core_wake_(struct cyttsp4 *cd)
+{
+	struct device *dev = cd->dev;
+	int rc;
+	u8 mode;
+	int t;
+
+	/* Already woken? */
+	mutex_lock(&cd->system_lock);
+	if (cd->sleep_state == SS_SLEEP_OFF) {
+		mutex_unlock(&cd->system_lock);
+		return 0;
+	}
+	cd->int_status &= ~CY_INT_IGNORE;
+	cd->int_status |= CY_INT_AWAKE;
+	cd->sleep_state = SS_WAKING;
+
+	if (cd->cpdata->power) {
+		dev_dbg(dev, "%s: Power up HW\n", __func__);
+		rc = cd->cpdata->power(cd->cpdata, 1, dev, &cd->ignore_irq);
+	} else {
+		dev_dbg(dev, "%s: No power function\n", __func__);
+		rc = -ENOSYS;
+	}
+	if (rc < 0) {
+		dev_err(dev, "%s: HW Power up fails r=%d\n",
+				__func__, rc);
+
+		/* Initiate a read transaction to wake up */
+		cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode);
+	} else
+		dev_vdbg(cd->dev, "%s: HW power up succeeds\n",
+			__func__);
+	mutex_unlock(&cd->system_lock);
+
+	t = wait_event_timeout(cd->wait_q,
+			(cd->int_status & CY_INT_AWAKE) == 0,
+			msecs_to_jiffies(CY_CORE_WAKEUP_TIMEOUT));
+	if (IS_TMO(t)) {
+		dev_err(dev, "%s: TMO waiting for wakeup\n", __func__);
+		mutex_lock(&cd->system_lock);
+		cd->int_status &= ~CY_INT_AWAKE;
+		/* Try starting up */
+		cyttsp4_queue_startup_(cd);
+		mutex_unlock(&cd->system_lock);
+	}
+
+	mutex_lock(&cd->system_lock);
+	cd->sleep_state = SS_SLEEP_OFF;
+	mutex_unlock(&cd->system_lock);
+
+	cyttsp4_start_wd_timer(cd);
+
+	return 0;
+}
+
+static int cyttsp4_core_wake(struct cyttsp4 *cd)
+{
+	int rc;
+
+	rc = cyttsp4_request_exclusive(cd, cd->dev,
+			CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n",
+				__func__, cd->exclusive_dev, cd->dev);
+		return 0;
+	}
+
+	rc = cyttsp4_core_wake_(cd);
+
+	if (cyttsp4_release_exclusive(cd, cd->dev) < 0)
+		dev_err(cd->dev, "%s: fail to release exclusive\n", __func__);
+	else
+		dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__);
+
+	return rc;
+}
+
+static int cyttsp4_startup_(struct cyttsp4 *cd)
+{
+	int retry = CY_CORE_STARTUP_RETRY_COUNT;
+	int rc;
+
+	cyttsp4_stop_wd_timer(cd);
+
+reset:
+	if (retry != CY_CORE_STARTUP_RETRY_COUNT)
+		dev_dbg(cd->dev, "%s: Retry %d\n", __func__,
+			CY_CORE_STARTUP_RETRY_COUNT - retry);
+
+	/* reset hardware and wait for heartbeat */
+	rc = cyttsp4_reset_and_wait(cd);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: Error on h/w reset r=%d\n", __func__, rc);
+		if (retry--)
+			goto reset;
+		goto exit;
+	}
+
+	/* exit bl into sysinfo mode */
+	dev_vdbg(cd->dev, "%s: write exit ldr...\n", __func__);
+	mutex_lock(&cd->system_lock);
+	cd->int_status &= ~CY_INT_IGNORE;
+	cd->int_status |= CY_INT_MODE_CHANGE;
+
+	rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(ldr_exit),
+			(u8 *)ldr_exit);
+	mutex_unlock(&cd->system_lock);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: Fail write r=%d\n", __func__, rc);
+		if (retry--)
+			goto reset;
+		goto exit;
+	}
+
+	rc = cyttsp4_wait_sysinfo_mode(cd);
+	if (rc < 0) {
+		u8 buf[sizeof(ldr_err_app)];
+		int rc1;
+
+		/* Check for invalid/corrupted touch application */
+		rc1 = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(ldr_err_app),
+				buf);
+		if (rc1) {
+			dev_err(cd->dev, "%s: Fail read r=%d\n", __func__, rc1);
+		} else if (!memcmp(buf, ldr_err_app, sizeof(ldr_err_app))) {
+			dev_err(cd->dev, "%s: Error launching touch application\n",
+				__func__);
+			mutex_lock(&cd->system_lock);
+			cd->invalid_touch_app = true;
+			mutex_unlock(&cd->system_lock);
+			goto exit_no_wd;
+		}
+
+		if (retry--)
+			goto reset;
+		goto exit;
+	}
+
+	mutex_lock(&cd->system_lock);
+	cd->invalid_touch_app = false;
+	mutex_unlock(&cd->system_lock);
+
+	/* read sysinfo data */
+	dev_vdbg(cd->dev, "%s: get sysinfo regs..\n", __func__);
+	rc = cyttsp4_get_sysinfo_regs(cd);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: failed to get sysinfo regs rc=%d\n",
+			__func__, rc);
+		if (retry--)
+			goto reset;
+		goto exit;
+	}
+
+	rc = cyttsp4_set_mode(cd, CY_MODE_OPERATIONAL);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: failed to set mode to operational rc=%d\n",
+			__func__, rc);
+		if (retry--)
+			goto reset;
+		goto exit;
+	}
+
+	cyttsp4_lift_all(&cd->md);
+
+	/* restore to sleep if was suspended */
+	mutex_lock(&cd->system_lock);
+	if (cd->sleep_state == SS_SLEEP_ON) {
+		cd->sleep_state = SS_SLEEP_OFF;
+		mutex_unlock(&cd->system_lock);
+		cyttsp4_core_sleep_(cd);
+		goto exit_no_wd;
+	}
+	mutex_unlock(&cd->system_lock);
+
+exit:
+	cyttsp4_start_wd_timer(cd);
+exit_no_wd:
+	return rc;
+}
+
+static int cyttsp4_startup(struct cyttsp4 *cd)
+{
+	int rc;
+
+	mutex_lock(&cd->system_lock);
+	cd->startup_state = STARTUP_RUNNING;
+	mutex_unlock(&cd->system_lock);
+
+	rc = cyttsp4_request_exclusive(cd, cd->dev,
+			CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n",
+				__func__, cd->exclusive_dev, cd->dev);
+		goto exit;
+	}
+
+	rc = cyttsp4_startup_(cd);
+
+	if (cyttsp4_release_exclusive(cd, cd->dev) < 0)
+		/* Don't return fail code, mode is already changed. */
+		dev_err(cd->dev, "%s: fail to release exclusive\n", __func__);
+	else
+		dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__);
+
+exit:
+	mutex_lock(&cd->system_lock);
+	cd->startup_state = STARTUP_NONE;
+	mutex_unlock(&cd->system_lock);
+
+	/* Wake the waiters for end of startup */
+	wake_up(&cd->wait_q);
+
+	return rc;
+}
+
+static void cyttsp4_startup_work_function(struct work_struct *work)
+{
+	struct cyttsp4 *cd =  container_of(work, struct cyttsp4, startup_work);
+	int rc;
+
+	rc = cyttsp4_startup(cd);
+	if (rc < 0)
+		dev_err(cd->dev, "%s: Fail queued startup r=%d\n",
+			__func__, rc);
+}
+
+static void cyttsp4_free_si_ptrs(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+
+	if (!si)
+		return;
+
+	kfree(si->si_ptrs.cydata);
+	kfree(si->si_ptrs.test);
+	kfree(si->si_ptrs.pcfg);
+	kfree(si->si_ptrs.opcfg);
+	kfree(si->si_ptrs.ddata);
+	kfree(si->si_ptrs.mdata);
+	kfree(si->btn);
+	kfree(si->xy_mode);
+	kfree(si->xy_data);
+	kfree(si->btn_rec_data);
+}
+
+#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME)
+static int cyttsp4_core_suspend(struct device *dev)
+{
+	struct cyttsp4 *cd = dev_get_drvdata(dev);
+	struct cyttsp4_mt_data *md = &cd->md;
+	int rc;
+
+	md->is_suspended = true;
+
+	rc = cyttsp4_core_sleep(cd);
+	if (rc < 0) {
+		dev_err(dev, "%s: Error on sleep\n", __func__);
+		return -EAGAIN;
+	}
+	return 0;
+}
+
+static int cyttsp4_core_resume(struct device *dev)
+{
+	struct cyttsp4 *cd = dev_get_drvdata(dev);
+	struct cyttsp4_mt_data *md = &cd->md;
+	int rc;
+
+	md->is_suspended = false;
+
+	rc = cyttsp4_core_wake(cd);
+	if (rc < 0) {
+		dev_err(dev, "%s: Error on wake\n", __func__);
+		return -EAGAIN;
+	}
+
+	return 0;
+}
+#endif
+
+const struct dev_pm_ops cyttsp4_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(cyttsp4_core_suspend, cyttsp4_core_resume)
+	SET_RUNTIME_PM_OPS(cyttsp4_core_suspend, cyttsp4_core_resume, NULL)
+};
+EXPORT_SYMBOL_GPL(cyttsp4_pm_ops);
+
+static int cyttsp4_mt_open(struct input_dev *input)
+{
+	pm_runtime_get(input->dev.parent);
+	return 0;
+}
+
+static void cyttsp4_mt_close(struct input_dev *input)
+{
+	struct cyttsp4_mt_data *md = input_get_drvdata(input);
+	mutex_lock(&md->report_lock);
+	if (!md->is_suspended)
+		pm_runtime_put(input->dev.parent);
+	mutex_unlock(&md->report_lock);
+}
+
+
+static int cyttsp4_setup_input_device(struct cyttsp4 *cd)
+{
+	struct device *dev = cd->dev;
+	struct cyttsp4_mt_data *md = &cd->md;
+	int signal = CY_IGNORE_VALUE;
+	int max_x, max_y, max_p, min, max;
+	int max_x_tmp, max_y_tmp;
+	int i;
+	int rc;
+
+	dev_vdbg(dev, "%s: Initialize event signals\n", __func__);
+	__set_bit(EV_ABS, md->input->evbit);
+	__set_bit(EV_REL, md->input->evbit);
+	__set_bit(EV_KEY, md->input->evbit);
+
+	max_x_tmp = md->si->si_ofs.max_x;
+	max_y_tmp = md->si->si_ofs.max_y;
+
+	/* get maximum values from the sysinfo data */
+	if (md->pdata->flags & CY_FLAG_FLIP) {
+		max_x = max_y_tmp - 1;
+		max_y = max_x_tmp - 1;
+	} else {
+		max_x = max_x_tmp - 1;
+		max_y = max_y_tmp - 1;
+	}
+	max_p = md->si->si_ofs.max_p;
+
+	/* set event signal capabilities */
+	for (i = 0; i < (md->pdata->frmwrk->size / CY_NUM_ABS_SET); i++) {
+		signal = md->pdata->frmwrk->abs
+			[(i * CY_NUM_ABS_SET) + CY_SIGNAL_OST];
+		if (signal != CY_IGNORE_VALUE) {
+			__set_bit(signal, md->input->absbit);
+			min = md->pdata->frmwrk->abs
+				[(i * CY_NUM_ABS_SET) + CY_MIN_OST];
+			max = md->pdata->frmwrk->abs
+				[(i * CY_NUM_ABS_SET) + CY_MAX_OST];
+			if (i == CY_ABS_ID_OST) {
+				/* shift track ids down to start at 0 */
+				max = max - min;
+				min = min - min;
+			} else if (i == CY_ABS_X_OST)
+				max = max_x;
+			else if (i == CY_ABS_Y_OST)
+				max = max_y;
+			else if (i == CY_ABS_P_OST)
+				max = max_p;
+			input_set_abs_params(md->input, signal, min, max,
+				md->pdata->frmwrk->abs
+				[(i * CY_NUM_ABS_SET) + CY_FUZZ_OST],
+				md->pdata->frmwrk->abs
+				[(i * CY_NUM_ABS_SET) + CY_FLAT_OST]);
+			dev_dbg(dev, "%s: register signal=%02X min=%d max=%d\n",
+				__func__, signal, min, max);
+			if ((i == CY_ABS_ID_OST) &&
+				(md->si->si_ofs.tch_rec_size <
+				CY_TMA4XX_TCH_REC_SIZE))
+				break;
+		}
+	}
+
+	input_mt_init_slots(md->input, md->si->si_ofs.tch_abs[CY_TCH_T].max,
+			INPUT_MT_DIRECT);
+	rc = input_register_device(md->input);
+	if (rc < 0)
+		dev_err(dev, "%s: Error, failed register input device r=%d\n",
+			__func__, rc);
+	return rc;
+}
+
+static int cyttsp4_mt_probe(struct cyttsp4 *cd)
+{
+	struct device *dev = cd->dev;
+	struct cyttsp4_mt_data *md = &cd->md;
+	struct cyttsp4_mt_platform_data *pdata = cd->pdata->mt_pdata;
+	int rc = 0;
+
+	mutex_init(&md->report_lock);
+	md->pdata = pdata;
+	/* Create the input device and register it. */
+	dev_vdbg(dev, "%s: Create the input device and register it\n",
+		__func__);
+	md->input = input_allocate_device();
+	if (md->input == NULL) {
+		dev_err(dev, "%s: Error, failed to allocate input device\n",
+			__func__);
+		rc = -ENOSYS;
+		goto error_alloc_failed;
+	}
+
+	md->input->name = pdata->inp_dev_name;
+	scnprintf(md->phys, sizeof(md->phys)-1, "%s", dev_name(dev));
+	md->input->phys = md->phys;
+	md->input->id.bustype = cd->bus_ops->bustype;
+	md->input->dev.parent = dev;
+	md->input->open = cyttsp4_mt_open;
+	md->input->close = cyttsp4_mt_close;
+	input_set_drvdata(md->input, md);
+
+	/* get sysinfo */
+	md->si = &cd->sysinfo;
+	if (!md->si) {
+		dev_err(dev, "%s: Fail get sysinfo pointer from core p=%p\n",
+			__func__, md->si);
+		goto error_get_sysinfo;
+	}
+
+	rc = cyttsp4_setup_input_device(cd);
+	if (rc)
+		goto error_init_input;
+
+	return 0;
+
+error_init_input:
+	input_free_device(md->input);
+error_get_sysinfo:
+	input_set_drvdata(md->input, NULL);
+error_alloc_failed:
+	dev_err(dev, "%s failed.\n", __func__);
+	return rc;
+}
+
+struct cyttsp4 *cyttsp4_probe(const struct cyttsp4_bus_ops *ops,
+		struct device *dev, u16 irq, size_t xfer_buf_size)
+{
+	struct cyttsp4 *cd;
+	struct cyttsp4_platform_data *pdata = dev_get_platdata(dev);
+	unsigned long irq_flags;
+	int rc = 0;
+
+	if (!pdata || !pdata->core_pdata || !pdata->mt_pdata) {
+		dev_err(dev, "%s: Missing platform data\n", __func__);
+		rc = -ENODEV;
+		goto error_no_pdata;
+	}
+
+	cd = kzalloc(sizeof(*cd), GFP_KERNEL);
+	if (!cd) {
+		dev_err(dev, "%s: Error, kzalloc\n", __func__);
+		rc = -ENOMEM;
+		goto error_alloc_data;
+	}
+
+	cd->xfer_buf = kzalloc(xfer_buf_size, GFP_KERNEL);
+	if (!cd->xfer_buf) {
+		dev_err(dev, "%s: Error, kzalloc\n", __func__);
+		rc = -ENOMEM;
+		goto error_free_cd;
+	}
+
+	/* Initialize device info */
+	cd->dev = dev;
+	cd->pdata = pdata;
+	cd->cpdata = pdata->core_pdata;
+	cd->bus_ops = ops;
+
+	/* Initialize mutexes and spinlocks */
+	mutex_init(&cd->system_lock);
+	mutex_init(&cd->adap_lock);
+
+	/* Initialize wait queue */
+	init_waitqueue_head(&cd->wait_q);
+
+	/* Initialize works */
+	INIT_WORK(&cd->startup_work, cyttsp4_startup_work_function);
+	INIT_WORK(&cd->watchdog_work, cyttsp4_watchdog_work);
+
+	/* Initialize IRQ */
+	cd->irq = gpio_to_irq(cd->cpdata->irq_gpio);
+	if (cd->irq < 0) {
+		rc = -EINVAL;
+		goto error_free_xfer;
+	}
+
+	dev_set_drvdata(dev, cd);
+
+	/* Call platform init function */
+	if (cd->cpdata->init) {
+		dev_dbg(cd->dev, "%s: Init HW\n", __func__);
+		rc = cd->cpdata->init(cd->cpdata, 1, cd->dev);
+	} else {
+		dev_dbg(cd->dev, "%s: No HW INIT function\n", __func__);
+		rc = 0;
+	}
+	if (rc < 0)
+		dev_err(cd->dev, "%s: HW Init fail r=%d\n", __func__, rc);
+
+	dev_dbg(dev, "%s: initialize threaded irq=%d\n", __func__, cd->irq);
+	if (cd->cpdata->level_irq_udelay > 0)
+		/* use level triggered interrupts */
+		irq_flags = IRQF_TRIGGER_LOW | IRQF_ONESHOT;
+	else
+		/* use edge triggered interrupts */
+		irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
+
+	rc = request_threaded_irq(cd->irq, NULL, cyttsp4_irq, irq_flags,
+		dev_name(dev), cd);
+	if (rc < 0) {
+		dev_err(dev, "%s: Error, could not request irq\n", __func__);
+		goto error_request_irq;
+	}
+
+	/* Setup watchdog timer */
+	setup_timer(&cd->watchdog_timer, cyttsp4_watchdog_timer,
+		(unsigned long)cd);
+
+	/*
+	 * call startup directly to ensure that the device
+	 * is tested before leaving the probe
+	 */
+	rc = cyttsp4_startup(cd);
+
+	/* Do not fail probe if startup fails but the device is detected */
+	if (rc < 0 && cd->mode == CY_MODE_UNKNOWN) {
+		dev_err(cd->dev, "%s: Fail initial startup r=%d\n",
+			__func__, rc);
+		goto error_startup;
+	}
+
+	rc = cyttsp4_mt_probe(cd);
+	if (rc < 0) {
+		dev_err(dev, "%s: Error, fail mt probe\n", __func__);
+		goto error_startup;
+	}
+
+	pm_runtime_enable(dev);
+
+	return cd;
+
+error_startup:
+	cancel_work_sync(&cd->startup_work);
+	cyttsp4_stop_wd_timer(cd);
+	pm_runtime_disable(dev);
+	cyttsp4_free_si_ptrs(cd);
+	free_irq(cd->irq, cd);
+error_request_irq:
+	if (cd->cpdata->init)
+		cd->cpdata->init(cd->cpdata, 0, dev);
+	dev_set_drvdata(dev, NULL);
+error_free_xfer:
+	kfree(cd->xfer_buf);
+error_free_cd:
+	kfree(cd);
+error_alloc_data:
+error_no_pdata:
+	dev_err(dev, "%s failed.\n", __func__);
+	return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(cyttsp4_probe);
+
+static void cyttsp4_mt_release(struct cyttsp4_mt_data *md)
+{
+	input_unregister_device(md->input);
+	input_set_drvdata(md->input, NULL);
+}
+
+int cyttsp4_remove(struct cyttsp4 *cd)
+{
+	struct device *dev = cd->dev;
+
+	cyttsp4_mt_release(&cd->md);
+
+	/*
+	 * Suspend the device before freeing the startup_work and stopping
+	 * the watchdog since sleep function restarts watchdog on failure
+	 */
+	pm_runtime_suspend(dev);
+	pm_runtime_disable(dev);
+
+	cancel_work_sync(&cd->startup_work);
+
+	cyttsp4_stop_wd_timer(cd);
+
+	free_irq(cd->irq, cd);
+	if (cd->cpdata->init)
+		cd->cpdata->init(cd->cpdata, 0, dev);
+	dev_set_drvdata(dev, NULL);
+	cyttsp4_free_si_ptrs(cd);
+	kfree(cd);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cyttsp4_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen core driver");
+MODULE_AUTHOR("Cypress");

drivers/input/touchscreen/cyttsp4_core.h

···
+/*
+ * cyttsp4_core.h
+ * Cypress TrueTouch(TM) Standard Product V4 Core driver module.
+ * For use with Cypress Txx4xx parts.
+ * Supported parts include:
+ * TMA4XX
+ * TMA1036
+ *
+ * Copyright (C) 2012 Cypress Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <[e-mail]>
+ *
+ */
+
+#ifndef _LINUX_CYTTSP4_CORE_H
+#define _LINUX_CYTTSP4_CORE_H
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+#include <linux/types.h>
+#include <linux/platform_data/cyttsp4.h>
+
+#define CY_REG_BASE			0x00
+
+#define CY_POST_CODEL_WDG_RST		0x01
+#define CY_POST_CODEL_CFG_DATA_CRC_FAIL	0x02
+#define CY_POST_CODEL_PANEL_TEST_FAIL	0x04
+
+#define CY_NUM_BTN_PER_REG		4
+
+/* touch record system information offset masks and shifts */
+#define CY_BYTE_OFS_MASK		0x1F
+#define CY_BOFS_MASK			0xE0
+#define CY_BOFS_SHIFT			5
+
+#define CY_TMA1036_TCH_REC_SIZE		6
+#define CY_TMA4XX_TCH_REC_SIZE		9
+#define CY_TMA1036_MAX_TCH		0x0E
+#define CY_TMA4XX_MAX_TCH		0x1E
+
+#define CY_NORMAL_ORIGIN		0	/* upper, left corner */
+#define CY_INVERT_ORIGIN		1	/* lower, right corner */
+
+/* helpers */
+#define GET_NUM_TOUCHES(x)		((x) & 0x1F)
+#define IS_LARGE_AREA(x)		((x) & 0x20)
+#define IS_BAD_PKT(x)			((x) & 0x20)
+#define IS_BOOTLOADER(hst_mode, reset_detect)	\
+		((hst_mode) & 0x01 || (reset_detect) != 0)
+#define IS_TMO(t)			((t) == 0)
+
+
+enum cyttsp_cmd_bits {
+	CY_CMD_COMPLETE = (1 << 6),
+};
+
+/* Timeout in ms. */
+#define CY_WATCHDOG_TIMEOUT		1000
+
+#define CY_MAX_PRINT_SIZE		512
+#ifdef VERBOSE_DEBUG
+#define CY_MAX_PRBUF_SIZE		PIPE_BUF
+#define CY_PR_TRUNCATED			" truncated..."
+#endif
+
+enum cyttsp4_ic_grpnum {
+	CY_IC_GRPNUM_RESERVED,
+	CY_IC_GRPNUM_CMD_REGS,
+	CY_IC_GRPNUM_TCH_REP,
+	CY_IC_GRPNUM_DATA_REC,
+	CY_IC_GRPNUM_TEST_REC,
+	CY_IC_GRPNUM_PCFG_REC,
+	CY_IC_GRPNUM_TCH_PARM_VAL,
+	CY_IC_GRPNUM_TCH_PARM_SIZE,
+	CY_IC_GRPNUM_RESERVED1,
+	CY_IC_GRPNUM_RESERVED2,
+	CY_IC_GRPNUM_OPCFG_REC,
+	CY_IC_GRPNUM_DDATA_REC,
+	CY_IC_GRPNUM_MDATA_REC,
+	CY_IC_GRPNUM_TEST_REGS,
+	CY_IC_GRPNUM_BTN_KEYS,
+	CY_IC_GRPNUM_TTHE_REGS,
+	CY_IC_GRPNUM_NUM
+};
+
+enum cyttsp4_int_state {
+	CY_INT_NONE,
+	CY_INT_IGNORE      = (1 << 0),
+	CY_INT_MODE_CHANGE = (1 << 1),
+	CY_INT_EXEC_CMD    = (1 << 2),
+	CY_INT_AWAKE       = (1 << 3),
+};
+
+enum cyttsp4_mode {
+	CY_MODE_UNKNOWN,
+	CY_MODE_BOOTLOADER   = (1 << 1),
+	CY_MODE_OPERATIONAL  = (1 << 2),
+	CY_MODE_SYSINFO      = (1 << 3),
+	CY_MODE_CAT          = (1 << 4),
+	CY_MODE_STARTUP      = (1 << 5),
+	CY_MODE_LOADER       = (1 << 6),
+	CY_MODE_CHANGE_MODE  = (1 << 7),
+	CY_MODE_CHANGED      = (1 << 8),
+	CY_MODE_CMD_COMPLETE = (1 << 9),
+};
+
+enum cyttsp4_sleep_state {
+	SS_SLEEP_OFF,
+	SS_SLEEP_ON,
+	SS_SLEEPING,
+	SS_WAKING,
+};
+
+enum cyttsp4_startup_state {
+	STARTUP_NONE,
+	STARTUP_QUEUED,
+	STARTUP_RUNNING,
+};
+
+#define CY_NUM_REVCTRL			8
+struct cyttsp4_cydata {
+	u8 ttpidh;
+	u8 ttpidl;
+	u8 fw_ver_major;
+	u8 fw_ver_minor;
+	u8 revctrl[CY_NUM_REVCTRL];
+	u8 blver_major;
+	u8 blver_minor;
+	u8 jtag_si_id3;
+	u8 jtag_si_id2;
+	u8 jtag_si_id1;
+	u8 jtag_si_id0;
+	u8 mfgid_sz;
+	u8 cyito_idh;
+	u8 cyito_idl;
+	u8 cyito_verh;
+	u8 cyito_verl;
+	u8 ttsp_ver_major;
+	u8 ttsp_ver_minor;
+	u8 device_info;
+	u8 mfg_id[];
+} __packed;
+
+struct cyttsp4_test {
+	u8 post_codeh;
+	u8 post_codel;
+} __packed;
+
+struct cyttsp4_pcfg {
+	u8 electrodes_x;
+	u8 electrodes_y;
+	u8 len_xh;
+	u8 len_xl;
+	u8 len_yh;
+	u8 len_yl;
+	u8 res_xh;
+	u8 res_xl;
+	u8 res_yh;
+	u8 res_yl;
+	u8 max_zh;
+	u8 max_zl;
+	u8 panel_info0;
+} __packed;
+
+struct cyttsp4_tch_rec_params {
+	u8 loc;
+	u8 size;
+} __packed;
+
+#define CY_NUM_TCH_FIELDS		7
+#define CY_NUM_EXT_TCH_FIELDS		3
+struct cyttsp4_opcfg {
+	u8 cmd_ofs;
+	u8 rep_ofs;
+	u8 rep_szh;
+	u8 rep_szl;
+	u8 num_btns;
+	u8 tt_stat_ofs;
+	u8 obj_cfg0;
+	u8 max_tchs;
+	u8 tch_rec_size;
+	struct cyttsp4_tch_rec_params tch_rec_old[CY_NUM_TCH_FIELDS];
+	u8 btn_rec_size;	/* btn record size (in bytes) */
+	u8 btn_diff_ofs;	/* btn data loc, diff counts  */
+	u8 btn_diff_size;	/* btn size of diff counts (in bits) */
+	struct cyttsp4_tch_rec_params tch_rec_new[CY_NUM_EXT_TCH_FIELDS];
+} __packed;
+
+struct cyttsp4_sysinfo_ptr {
+	struct cyttsp4_cydata *cydata;
+	struct cyttsp4_test *test;
+	struct cyttsp4_pcfg *pcfg;
+	struct cyttsp4_opcfg *opcfg;
+	struct cyttsp4_ddata *ddata;
+	struct cyttsp4_mdata *mdata;
+} __packed;
+
+struct cyttsp4_sysinfo_data {
+	u8 hst_mode;
+	u8 reserved;
+	u8 map_szh;
+	u8 map_szl;
+	u8 cydata_ofsh;
+	u8 cydata_ofsl;
+	u8 test_ofsh;
+	u8 test_ofsl;
+	u8 pcfg_ofsh;
+	u8 pcfg_ofsl;
+	u8 opcfg_ofsh;
+	u8 opcfg_ofsl;
+	u8 ddata_ofsh;
+	u8 ddata_ofsl;
+	u8 mdata_ofsh;
+	u8 mdata_ofsl;
+} __packed;
+
+enum cyttsp4_tch_abs {	/* for ordering within the extracted touch data array */
+	CY_TCH_X,	/* X */
+	CY_TCH_Y,	/* Y */
+	CY_TCH_P,	/* P (Z) */
+	CY_TCH_T,	/* TOUCH ID */
+	CY_TCH_E,	/* EVENT ID */
+	CY_TCH_O,	/* OBJECT ID */
+	CY_TCH_W,	/* SIZE */
+	CY_TCH_MAJ,	/* TOUCH_MAJOR */
+	CY_TCH_MIN,	/* TOUCH_MINOR */
+	CY_TCH_OR,	/* ORIENTATION */
+	CY_TCH_NUM_ABS
+};
+
+static const char * const cyttsp4_tch_abs_string[] = {
+	[CY_TCH_X]	= "X",
+	[CY_TCH_Y]	= "Y",
+	[CY_TCH_P]	= "P",
+	[CY_TCH_T]	= "T",
+	[CY_TCH_E]	= "E",
+	[CY_TCH_O]	= "O",
+	[CY_TCH_W]	= "W",
+	[CY_TCH_MAJ]	= "MAJ",
+	[CY_TCH_MIN]	= "MIN",
+	[CY_TCH_OR]	= "OR",
+	[CY_TCH_NUM_ABS] = "INVALID"
+};
+
+struct cyttsp4_touch {
+	int abs[CY_TCH_NUM_ABS];
+};
+
+struct cyttsp4_tch_abs_params {
+	size_t ofs;	/* abs byte offset */
+	size_t size;	/* size in bits */
+	size_t max;	/* max value */
+	size_t bofs;	/* bit offset */
+};
+
+struct cyttsp4_sysinfo_ofs {
+	size_t chip_type;
+	size_t cmd_ofs;
+	size_t rep_ofs;
+	size_t rep_sz;
+	size_t num_btns;
+	size_t num_btn_regs;	/* ceil(num_btns/4) */
+	size_t tt_stat_ofs;
+	size_t tch_rec_size;
+	size_t obj_cfg0;
+	size_t max_tchs;
+	size_t mode_size;
+	size_t data_size;
+	size_t map_sz;
+	size_t max_x;
+	size_t x_origin;	/* left or right corner */
+	size_t max_y;
+	size_t y_origin;	/* upper or lower corner */
+	size_t max_p;
+	size_t cydata_ofs;
+	size_t test_ofs;
+	size_t pcfg_ofs;
+	size_t opcfg_ofs;
+	size_t ddata_ofs;
+	size_t mdata_ofs;
+	size_t cydata_size;
+	size_t test_size;
+	size_t pcfg_size;
+	size_t opcfg_size;
+	size_t ddata_size;
+	size_t mdata_size;
+	size_t btn_keys_size;
+	struct cyttsp4_tch_abs_params tch_abs[CY_TCH_NUM_ABS];
+	size_t btn_rec_size; /* btn record size (in bytes) */
+	size_t btn_diff_ofs;/* btn data loc ,diff counts, (Op-Mode byte ofs) */
+	size_t btn_diff_size;/* btn size of diff counts (in bits) */
+};
+
+enum cyttsp4_btn_state {
+	CY_BTN_RELEASED,
+	CY_BTN_PRESSED,
+	CY_BTN_NUM_STATE
+};
+
+struct cyttsp4_btn {
+	bool enabled;
+	int state;	/* CY_BTN_PRESSED, CY_BTN_RELEASED */
+	int key_code;
+};
+
+struct cyttsp4_sysinfo {
+	bool ready;
+	struct cyttsp4_sysinfo_data si_data;
+	struct cyttsp4_sysinfo_ptr si_ptrs;
+	struct cyttsp4_sysinfo_ofs si_ofs;
+	struct cyttsp4_btn *btn;	/* button states */
+	u8 *btn_rec_data;		/* button diff count data */
+	u8 *xy_mode;			/* operational mode and status regs */
+	u8 *xy_data;			/* operational touch regs */
+};
+
+struct cyttsp4_mt_data {
+	struct cyttsp4_mt_platform_data *pdata;
+	struct cyttsp4_sysinfo *si;
+	struct input_dev *input;
+	struct mutex report_lock;
+	bool is_suspended;
+	char phys[NAME_MAX];
+	int num_prv_tch;
+};
+
+struct cyttsp4 {
+	struct device *dev;
+	struct mutex system_lock;
+	struct mutex adap_lock;
+	enum cyttsp4_mode mode;
+	enum cyttsp4_sleep_state sleep_state;
+	enum cyttsp4_startup_state startup_state;
+	int int_status;
+	wait_queue_head_t wait_q;
+	int irq;
+	struct work_struct startup_work;
+	struct work_struct watchdog_work;
+	struct timer_list watchdog_timer;
+	struct cyttsp4_sysinfo sysinfo;
+	void *exclusive_dev;
+	int exclusive_waits;
+	atomic_t ignore_irq;
+	bool invalid_touch_app;
+	struct cyttsp4_mt_data md;
+	struct cyttsp4_platform_data *pdata;
+	struct cyttsp4_core_platform_data *cpdata;
+	const struct cyttsp4_bus_ops *bus_ops;
+	u8 *xfer_buf;
+#ifdef VERBOSE_DEBUG
+	u8 pr_buf[CY_MAX_PRBUF_SIZE];
+#endif
+};
+
+struct cyttsp4_bus_ops {
+	u16 bustype;
+	int (*write)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
+			const void *values);
+	int (*read)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
+			void *values);
+};
+
+enum cyttsp4_hst_mode_bits {
+	CY_HST_TOGGLE      = (1 << 7),
+	CY_HST_MODE_CHANGE = (1 << 3),
+	CY_HST_MODE        = (7 << 4),
+	CY_HST_OPERATE     = (0 << 4),
+	CY_HST_SYSINFO     = (1 << 4),
+	CY_HST_CAT         = (2 << 4),
+	CY_HST_LOWPOW      = (1 << 2),
+	CY_HST_SLEEP       = (1 << 1),
+	CY_HST_RESET       = (1 << 0),
+};
+
+/* abs settings */
+#define CY_IGNORE_VALUE			0xFFFF
+
+/* abs signal capabilities offsets in the frameworks array */
+enum cyttsp4_sig_caps {
+	CY_SIGNAL_OST,
+	CY_MIN_OST,
+	CY_MAX_OST,
+	CY_FUZZ_OST,
+	CY_FLAT_OST,
+	CY_NUM_ABS_SET	/* number of signal capability fields */
+};
+
+/* abs axis signal offsets in the framworks array  */
+enum cyttsp4_sig_ost {
+	CY_ABS_X_OST,
+	CY_ABS_Y_OST,
+	CY_ABS_P_OST,
+	CY_ABS_W_OST,
+	CY_ABS_ID_OST,
+	CY_ABS_MAJ_OST,
+	CY_ABS_MIN_OST,
+	CY_ABS_OR_OST,
+	CY_NUM_ABS_OST	/* number of abs signals */
+};
+
+enum cyttsp4_flags {
+	CY_FLAG_NONE = 0x00,
+	CY_FLAG_HOVER = 0x04,
+	CY_FLAG_FLIP = 0x08,
+	CY_FLAG_INV_X = 0x10,
+	CY_FLAG_INV_Y = 0x20,
+	CY_FLAG_VKEYS = 0x40,
+};
+
+enum cyttsp4_object_id {
+	CY_OBJ_STANDARD_FINGER,
+	CY_OBJ_LARGE_OBJECT,
+	CY_OBJ_STYLUS,
+	CY_OBJ_HOVER,
+};
+
+enum cyttsp4_event_id {
+	CY_EV_NO_EVENT,
+	CY_EV_TOUCHDOWN,
+	CY_EV_MOVE,		/* significant displacement (> act dist) */
+	CY_EV_LIFTOFF,		/* record reports last position */
+};
+
+/* x-axis resolution of panel in pixels */
+#define CY_PCFG_RESOLUTION_X_MASK	0x7F
+
+/* y-axis resolution of panel in pixels */
+#define CY_PCFG_RESOLUTION_Y_MASK	0x7F
+
+/* x-axis, 0:origin is on left side of panel, 1: right */
+#define CY_PCFG_ORIGIN_X_MASK		0x80
+
+/* y-axis, 0:origin is on top side of panel, 1: bottom */
+#define CY_PCFG_ORIGIN_Y_MASK		0x80
+
+static inline int cyttsp4_adap_read(struct cyttsp4 *ts, u8 addr, int size,
+		void *buf)
+{
+	return ts->bus_ops->read(ts->dev, ts->xfer_buf, addr, size, buf);
+}
+
+static inline int cyttsp4_adap_write(struct cyttsp4 *ts, u8 addr, int size,
+		const void *buf)
+{
+	return ts->bus_ops->write(ts->dev, ts->xfer_buf, addr, size, buf);
+}
+
+extern struct cyttsp4 *cyttsp4_probe(const struct cyttsp4_bus_ops *ops,
+		struct device *dev, u16 irq, size_t xfer_buf_size);
+extern int cyttsp4_remove(struct cyttsp4 *ts);
+int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
+		u8 length, const void *values);
+int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
+		u8 length, void *values);
+extern const struct dev_pm_ops cyttsp4_pm_ops;
+
+#endif /* _LINUX_CYTTSP4_CORE_H */

drivers/input/touchscreen/cyttsp4_i2c.c

···
+/*
+ * cyttsp_i2c.c
+ * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
+ * For use with Cypress  Txx4xx parts.
+ * Supported parts include:
+ * TMA4XX
+ * TMA1036
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <[e-mail]>
+ * Copyright (C) 2013 Cypress Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <[e-mail]>
+ *
+ */
+
+#include "cyttsp4_core.h"
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+
+#define CYTTSP4_I2C_DATA_SIZE	(3 * 256)
+
+static const struct cyttsp4_bus_ops cyttsp4_i2c_bus_ops = {
+	.bustype	= BUS_I2C,
+	.write		= cyttsp_i2c_write_block_data,
+	.read           = cyttsp_i2c_read_block_data,
+};
+
+static int cyttsp4_i2c_probe(struct i2c_client *client,
+				      const struct i2c_device_id *id)
+{
+	struct cyttsp4 *ts;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "I2C functionality not Supported\n");
+		return -EIO;
+	}
+
+	ts = cyttsp4_probe(&cyttsp4_i2c_bus_ops, &client->dev, client->irq,
+			  CYTTSP4_I2C_DATA_SIZE);
+
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	return 0;
+}
+
+static int cyttsp4_i2c_remove(struct i2c_client *client)
+{
+	struct cyttsp4 *ts = i2c_get_clientdata(client);
+
+	cyttsp4_remove(ts);
+
+	return 0;
+}
+
+static const struct i2c_device_id cyttsp4_i2c_id[] = {
+	{ CYTTSP4_I2C_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, cyttsp4_i2c_id);
+
+static struct i2c_driver cyttsp4_i2c_driver = {
+	.driver = {
+		.name	= CYTTSP4_I2C_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &cyttsp4_pm_ops,
+	},
+	.probe		= cyttsp4_i2c_probe,
+	.remove		= cyttsp4_i2c_remove,
+	.id_table	= cyttsp4_i2c_id,
+};
+
+module_i2c_driver(cyttsp4_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver");
+MODULE_AUTHOR("Cypress");
+MODULE_ALIAS("i2c:cyttsp4");

drivers/input/touchscreen/cyttsp4_spi.c

···
+/*
+ * Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver.
+ * For use with Cypress Txx4xx parts.
+ * Supported parts include:
+ * TMA4XX
+ * TMA1036
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <[e-mail]>
+ * Copyright (C) 2013 Cypress Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <[e-mail]>
+ *
+ */
+
+#include "cyttsp4_core.h"
+
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+
+#define CY_SPI_WR_OP		0x00 /* r/~w */
+#define CY_SPI_RD_OP		0x01
+#define CY_SPI_BITS_PER_WORD	8
+#define CY_SPI_A8_BIT		0x02
+#define CY_SPI_WR_HEADER_BYTES	2
+#define CY_SPI_RD_HEADER_BYTES	1
+#define CY_SPI_CMD_BYTES	2
+#define CY_SPI_SYNC_BYTE	0
+#define CY_SPI_SYNC_ACK		0x62 /* from TRM *A protocol */
+#define CY_SPI_DATA_SIZE	(2 * 256)
+
+#define CY_SPI_DATA_BUF_SIZE	(CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)
+
+static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
+			   u8 op, u8 reg, u8 *buf, int length)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct spi_message msg;
+	struct spi_transfer xfer[2];
+	u8 *wr_buf = &xfer_buf[0];
+	u8 rd_buf[CY_SPI_CMD_BYTES];
+	int retval;
+	int i;
+
+	if (length > CY_SPI_DATA_SIZE) {
+		dev_err(dev, "%s: length %d is too big.\n",
+			__func__, length);
+		return -EINVAL;
+	}
+
+	memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE);
+	memset(rd_buf, 0, CY_SPI_CMD_BYTES);
+
+	if (reg > 255)
+		wr_buf[0] = op + CY_SPI_A8_BIT;
+	else
+		wr_buf[0] = op;
+	if (op == CY_SPI_WR_OP)
+		wr_buf[1] = reg % 256;
+	if (op == CY_SPI_WR_OP && length > 0)
+		memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length);
+
+	memset(xfer, 0, sizeof(xfer));
+	spi_message_init(&msg);
+
+	/*
+	  We set both TX and RX buffers because Cypress TTSP
+	  requires full duplex operation.
+	*/
+	xfer[0].tx_buf = wr_buf;
+	xfer[0].rx_buf = rd_buf;
+	switch (op) {
+	case CY_SPI_WR_OP:
+		xfer[0].len = length + CY_SPI_CMD_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+		break;
+
+	case CY_SPI_RD_OP:
+		xfer[0].len = CY_SPI_RD_HEADER_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+
+		xfer[1].rx_buf = buf;
+		xfer[1].len = length;
+		spi_message_add_tail(&xfer[1], &msg);
+		break;
+
+	default:
+		dev_err(dev, "%s: bad operation code=%d\n", __func__, op);
+		return -EINVAL;
+	}
+
+	retval = spi_sync(spi, &msg);
+	if (retval < 0) {
+		dev_dbg(dev, "%s: spi_sync() error %d, len=%d, op=%d\n",
+			__func__, retval, xfer[1].len, op);
+
+		/*
+		 * do not return here since was a bad ACK sequence
+		 * let the following ACK check handle any errors and
+		 * allow silent retries
+		 */
+	}
+
+	if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK) {
+		dev_dbg(dev, "%s: operation %d failed\n", __func__, op);
+
+		for (i = 0; i < CY_SPI_CMD_BYTES; i++)
+			dev_dbg(dev, "%s: test rd_buf[%d]:0x%02x\n",
+				__func__, i, rd_buf[i]);
+		for (i = 0; i < length; i++)
+			dev_dbg(dev, "%s: test buf[%d]:0x%02x\n",
+				__func__, i, buf[i]);
+
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf,
+				      u8 addr, u8 length, void *data)
+{
+	int rc;
+
+	rc = cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, NULL, 0);
+	if (rc)
+		return rc;
+	else
+		return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data,
+				length);
+}
+
+static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf,
+				       u8 addr, u8 length, const void *data)
+{
+	return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data,
+			length);
+}
+
+static const struct cyttsp4_bus_ops cyttsp_spi_bus_ops = {
+	.bustype	= BUS_SPI,
+	.write		= cyttsp_spi_write_block_data,
+	.read		= cyttsp_spi_read_block_data,
+};
+
+static int cyttsp4_spi_probe(struct spi_device *spi)
+{
+	struct cyttsp4 *ts;
+	int error;
+
+	/* Set up SPI*/
+	spi->bits_per_word = CY_SPI_BITS_PER_WORD;
+	spi->mode = SPI_MODE_0;
+	error = spi_setup(spi);
+	if (error < 0) {
+		dev_err(&spi->dev, "%s: SPI setup error %d\n",
+			__func__, error);
+		return error;
+	}
+
+	ts = cyttsp4_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq,
+			  CY_SPI_DATA_BUF_SIZE);
+
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	return 0;
+}
+
+static int cyttsp4_spi_remove(struct spi_device *spi)
+{
+	struct cyttsp4 *ts = spi_get_drvdata(spi);
+	cyttsp4_remove(ts);
+
+	return 0;
+}
+
+static struct spi_driver cyttsp4_spi_driver = {
+	.driver = {
+		.name	= CYTTSP4_SPI_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &cyttsp4_pm_ops,
+	},
+	.probe  = cyttsp4_spi_probe,
+	.remove = cyttsp4_spi_remove,
+};
+
+module_spi_driver(cyttsp4_spi_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver");
+MODULE_AUTHOR("Cypress");
+MODULE_ALIAS("spi:cyttsp4");

drivers/input/touchscreen/cyttsp_core.c

···
 	int tries;
 
 	for (tries = 0; tries < CY_NUM_RETRY; tries++) {
-		error = ts->bus_ops->read(ts, command, length, buf);
+		error = ts->bus_ops->read(ts->dev, ts->xfer_buf, command,
+				length, buf);
 		if (!error)
 			return 0;
 
···
 	int tries;
 
 	for (tries = 0; tries < CY_NUM_RETRY; tries++) {
-		error = ts->bus_ops->write(ts, command, length, buf);
+		error = ts->bus_ops->write(ts->dev, ts->xfer_buf, command,
+				length, buf);
 		if (!error)
 			return 0;
 

drivers/input/touchscreen/cyttsp_core.h

···
 
 struct cyttsp_bus_ops {
 	u16 bustype;
-	int (*write)(struct cyttsp *ts,
-		     u8 addr, u8 length, const void *values);
-	int (*read)(struct cyttsp *ts, u8 addr, u8 length, void *values);
+	int (*write)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
+			const void *values);
+	int (*read)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
+			void *values);
 };
 
 enum cyttsp_state {
···
 			    struct device *dev, int irq, size_t xfer_buf_size);
 void cyttsp_remove(struct cyttsp *ts);
 
+int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
+		u8 length, const void *values);
+int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
+		u8 length, void *values);
 extern const struct dev_pm_ops cyttsp_pm_ops;
 
 #endif /* __CYTTSP_CORE_H__ */

drivers/input/touchscreen/cyttsp_i2c.c

···
 /*
- * Source for:
+ * cyttsp_i2c.c
  * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
  * For use with Cypress Txx3xx parts.
  * Supported parts include:
···
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- *
- * Contact Cypress Semiconductor at www.cypress.com <[e-mail]>
+ * Contact Cypress Semiconductor at www.cypress.com <[e-mail]>
  *
  */
 
···
 #include <linux/input.h>
 
 #define CY_I2C_DATA_SIZE	128
-
-static int cyttsp_i2c_read_block_data(struct cyttsp *ts,
-				      u8 addr, u8 length, void *values)
-{
-	struct i2c_client *client = to_i2c_client(ts->dev);
-	struct i2c_msg msgs[] = {
-		{
-			.addr = client->addr,
-			.flags = 0,
-			.len = 1,
-			.buf = &addr,
-		},
-		{
-			.addr = client->addr,
-			.flags = I2C_M_RD,
-			.len = length,
-			.buf = values,
-		},
-	};
-	int retval;
-
-	retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
-	if (retval < 0)
-		return retval;
-
-	return retval != ARRAY_SIZE(msgs) ? -EIO : 0;
-}
-
-static int cyttsp_i2c_write_block_data(struct cyttsp *ts,
-				       u8 addr, u8 length, const void *values)
-{
-	struct i2c_client *client = to_i2c_client(ts->dev);
-	int retval;
-
-	ts->xfer_buf[0] = addr;
-	memcpy(&ts->xfer_buf[1], values, length);
-
-	retval = i2c_master_send(client, ts->xfer_buf, length + 1);
-
-	return retval < 0 ? retval : 0;
-}
 
 static const struct cyttsp_bus_ops cyttsp_i2c_bus_ops = {
 	.bustype	= BUS_I2C,
···
 		return PTR_ERR(ts);
 
 	i2c_set_clientdata(client, ts);
-
 	return 0;
 }
 

drivers/input/touchscreen/cyttsp_i2c_common.c

···
+/*
+ * cyttsp_i2c_common.c
+ * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
+ * For use with Cypress Txx3xx and Txx4xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ * TMA4XX
+ * TMA1036
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <[e-mail]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <[e-mail]>
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf,
+				      u8 addr, u8 length, void *values)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct i2c_msg msgs[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = 1,
+			.buf = &addr,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = length,
+			.buf = values,
+		},
+	};
+	int retval;
+
+	retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (retval < 0)
+		return retval;
+
+	return retval != ARRAY_SIZE(msgs) ? -EIO : 0;
+}
+EXPORT_SYMBOL_GPL(cyttsp_i2c_read_block_data);
+
+int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf,
+				       u8 addr, u8 length, const void *values)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int retval;
+
+	xfer_buf[0] = addr;
+	memcpy(&xfer_buf[1], values, length);
+
+	retval = i2c_master_send(client, xfer_buf, length + 1);
+
+	return retval < 0 ? retval : 0;
+}
+EXPORT_SYMBOL_GPL(cyttsp_i2c_write_block_data);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cypress");

drivers/input/touchscreen/cyttsp_spi.c

···
  *
  * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
  * Copyright (C) 2012 Javier Martinez Canillas <[e-mail]>
+ * Copyright (C) 2013 Cypress Semiconductor
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
···
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- *
- * Contact Cypress Semiconductor at www.cypress.com <[e-mail]>
+ * Contact Cypress Semiconductor at www.cypress.com <[e-mail]>
  *
  */
 
···
 #define CY_SPI_DATA_BUF_SIZE	(CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)
 #define CY_SPI_BITS_PER_WORD	8
 
-static int cyttsp_spi_xfer(struct cyttsp *ts,
+static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
 			   u8 op, u8 reg, u8 *buf, int length)
 {
-	struct spi_device *spi = to_spi_device(ts->dev);
+	struct spi_device *spi = to_spi_device(dev);
 	struct spi_message msg;
 	struct spi_transfer xfer[2];
-	u8 *wr_buf = &ts->xfer_buf[0];
-	u8 *rd_buf = &ts->xfer_buf[CY_SPI_DATA_BUF_SIZE];
+	u8 *wr_buf = &xfer_buf[0];
+	u8 *rd_buf = &xfer_buf[CY_SPI_DATA_BUF_SIZE];
 	int retval;
 	int i;
 
 	if (length > CY_SPI_DATA_SIZE) {
-		dev_err(ts->dev, "%s: length %d is too big.\n",
+		dev_err(dev, "%s: length %d is too big.\n",
 			__func__, length);
 		return -EINVAL;
 	}
···
 		break;
 
 	default:
-		dev_err(ts->dev, "%s: bad operation code=%d\n", __func__, op);
+		dev_err(dev, "%s: bad operation code=%d\n", __func__, op);
 		return -EINVAL;
 	}
 
 	retval = spi_sync(spi, &msg);
 	if (retval < 0) {
-		dev_dbg(ts->dev, "%s: spi_sync() error %d, len=%d, op=%d\n",
+		dev_dbg(dev, "%s: spi_sync() error %d, len=%d, op=%d\n",
 			__func__, retval, xfer[1].len, op);
 
 		/*
···
 
 	if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK1 ||
 	    rd_buf[CY_SPI_SYNC_BYTE + 1] != CY_SPI_SYNC_ACK2) {
-
-		dev_dbg(ts->dev, "%s: operation %d failed\n", __func__, op);
+		dev_dbg(dev, "%s: operation %d failed\n", __func__, op);
 
 		for (i = 0; i < CY_SPI_CMD_BYTES; i++)
-			dev_dbg(ts->dev, "%s: test rd_buf[%d]:0x%02x\n",
+			dev_dbg(dev, "%s: test rd_buf[%d]:0x%02x\n",
 				__func__, i, rd_buf[i]);
 		for (i = 0; i < length; i++)
-			dev_dbg(ts->dev, "%s: test buf[%d]:0x%02x\n",
+			dev_dbg(dev, "%s: test buf[%d]:0x%02x\n",
 				__func__, i, buf[i]);
 
 		return -EIO;
···
 	return 0;
 }
 
-static int cyttsp_spi_read_block_data(struct cyttsp *ts,
+static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf,
 				      u8 addr, u8 length, void *data)
 {
-	return cyttsp_spi_xfer(ts, CY_SPI_RD_OP, addr, data, length);
+	return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data,
+			length);
 }
 
-static int cyttsp_spi_write_block_data(struct cyttsp *ts,
+static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf,
 				       u8 addr, u8 length, const void *data)
 {
-	return cyttsp_spi_xfer(ts, CY_SPI_WR_OP, addr, (void *)data, length);
+	return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data,
+			length);
 }
 
 static const struct cyttsp_bus_ops cyttsp_spi_bus_ops = {

drivers/input/touchscreen/da9052_tsi.c

···
 	input_unregister_device(tsi->dev);
 	kfree(tsi);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/touchscreen/egalax_ts.c

···
 }
 
 static int egalax_ts_probe(struct i2c_client *client,
-				       const struct i2c_device_id *id)
+			   const struct i2c_device_id *id)
 {
 	struct egalax_ts *ts;
 	struct input_dev *input_dev;
-	int ret;
 	int error;
 
-	ts = kzalloc(sizeof(struct egalax_ts), GFP_KERNEL);
+	ts = devm_kzalloc(&client->dev, sizeof(struct egalax_ts), GFP_KERNEL);
 	if (!ts) {
 		dev_err(&client->dev, "Failed to allocate memory\n");
 		return -ENOMEM;
 	}
 
-	input_dev = input_allocate_device();
+	input_dev = devm_input_allocate_device(&client->dev);
 	if (!input_dev) {
 		dev_err(&client->dev, "Failed to allocate memory\n");
-		error = -ENOMEM;
-		goto err_free_ts;
+		return -ENOMEM;
 	}
 
 	ts->client = client;
···
 	error = egalax_wake_up_device(client);
 	if (error) {
 		dev_err(&client->dev, "Failed to wake up the controller\n");
-		goto err_free_dev;
+		return error;
 	}
 
-	ret = egalax_firmware_version(client);
-	if (ret < 0) {
+	error = egalax_firmware_version(client);
+	if (error < 0) {
 		dev_err(&client->dev, "Failed to read firmware version\n");
-		error = -EIO;
-		goto err_free_dev;
+		return error;
 	}
 
 	input_dev->name = "EETI eGalax Touch Screen";
 	input_dev->id.bustype = BUS_I2C;
-	input_dev->dev.parent = &client->dev;
 
 	__set_bit(EV_ABS, input_dev->evbit);
 	__set_bit(EV_KEY, input_dev->evbit);
···
 
 	input_set_drvdata(input_dev, ts);
 
-	error = request_threaded_irq(client->irq, NULL, egalax_ts_interrupt,
-				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-				     "egalax_ts", ts);
+	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					  egalax_ts_interrupt,
+					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					  "egalax_ts", ts);
 	if (error < 0) {
 		dev_err(&client->dev, "Failed to register interrupt\n");
-		goto err_free_dev;
+		return error;
 	}
 
 	error = input_register_device(ts->input_dev);
 	if (error)
-		goto err_free_irq;
+		return error;
 
 	i2c_set_clientdata(client, ts);
-	return 0;
-
-err_free_irq:
-	free_irq(client->irq, ts);
-err_free_dev:
-	input_free_device(input_dev);
-err_free_ts:
-	kfree(ts);
-
-	return error;
-}
-
-static int egalax_ts_remove(struct i2c_client *client)
-{
-	struct egalax_ts *ts = i2c_get_clientdata(client);
-
-	free_irq(client->irq, ts);
-
-	input_unregister_device(ts->input_dev);
-	kfree(ts);
-
 	return 0;
 }
 
···
 	},
 	.id_table	= egalax_ts_id,
 	.probe		= egalax_ts_probe,
-	.remove		= egalax_ts_remove,
 };
 
 module_i2c_driver(egalax_ts_driver);

drivers/input/touchscreen/intel-mid-touch.c

···
 	input_unregister_device(tsdev->input);
 	kfree(tsdev);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/touchscreen/jornada720_ts.c

···
  fail2:
 	free_irq(IRQ_GPIO9, pdev);
  fail1:
-	platform_set_drvdata(pdev, NULL);
 	input_free_device(input_dev);
 	kfree(jornada_ts);
 	return error;
···
 	struct jornada_ts *jornada_ts = platform_get_drvdata(pdev);
 
 	free_irq(IRQ_GPIO9, pdev);
-	platform_set_drvdata(pdev, NULL);
 	input_unregister_device(jornada_ts->dev);
 	kfree(jornada_ts);
 

drivers/input/touchscreen/mc13783_ts.c

···
 {
 	struct mc13783_ts_priv *priv = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
-
 	destroy_workqueue(priv->workq);
 	input_unregister_device(priv->idev);
 	kfree(priv);

drivers/input/touchscreen/ti_am335x_tsc.c

···
 
 	input_unregister_device(ts_dev->input);
 
-	platform_set_drvdata(pdev, NULL);
 	kfree(ts_dev);
 	return 0;
 }

drivers/input/touchscreen/tnetv107x-ts.c

···
 error_map:
 	release_mem_region(ts->res->start, resource_size(ts->res));
 error_res:
-	platform_set_drvdata(pdev, NULL);
 	kfree(ts);
 
 	return error;
···
 	clk_put(ts->clk);
 	iounmap(ts->regs);
 	release_mem_region(ts->res->start, resource_size(ts->res));
-	platform_set_drvdata(pdev, NULL);
 	kfree(ts);
 
 	return 0;

drivers/input/touchscreen/tps6507x-ts.c

···
 #include <linux/workqueue.h>
 #include <linux/slab.h>
 #include <linux/input.h>
+#include <linux/input-polldev.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/tps6507x.h>
 #include <linux/input/tps6507x-ts.h>
···
 };
 
 struct tps6507x_ts {
-	struct input_dev	*input_dev;
 	struct device		*dev;
-	char			phys[32];
-	struct delayed_work	work;
-	unsigned		polling;	/* polling is active */
-	struct ts_event		tc;
+	struct input_polled_dev	*poll_dev;
 	struct tps6507x_dev	*mfd;
-	u16			model;
-	unsigned		pendown;
-	int			irq;
-	void			(*clear_penirq)(void);
-	unsigned long		poll_period;	/* ms */
+	char			phys[32];
+	struct ts_event		tc;
 	u16			min_pressure;
-	int			vref;		/* non-zero to leave vref on */
+	bool			pendown;
 };
 
 static int tps6507x_read_u8(struct tps6507x_ts *tsc, u8 reg, u8 *data)
···
 	return ret;
 }
 
-static void tps6507x_ts_handler(struct work_struct *work)
+static void tps6507x_ts_poll(struct input_polled_dev *poll_dev)
 {
-	struct tps6507x_ts *tsc =  container_of(work,
-				struct tps6507x_ts, work.work);
-	struct input_dev *input_dev = tsc->input_dev;
-	int pendown;
-	int schd;
-	int poll = 0;
+	struct tps6507x_ts *tsc = poll_dev->private;
+	struct input_dev *input_dev = poll_dev->input;
+	bool pendown;
 	s32 ret;
 
-	ret =  tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_PRESSURE,
-				       &tsc->tc.pressure);
+	ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_PRESSURE,
+				      &tsc->tc.pressure);
 	if (ret)
 		goto done;
 
···
 		input_report_key(input_dev, BTN_TOUCH, 0);
 		input_report_abs(input_dev, ABS_PRESSURE, 0);
 		input_sync(input_dev);
-		tsc->pendown = 0;
+		tsc->pendown = false;
 	}
 
 	if (pendown) {
···
 		input_report_abs(input_dev, ABS_Y, tsc->tc.y);
 		input_report_abs(input_dev, ABS_PRESSURE, tsc->tc.pressure);
 		input_sync(input_dev);
-		tsc->pendown = 1;
-		poll = 1;
+		tsc->pendown = true;
 	}
 
 done:
-	/* always poll if not using interrupts */
-	poll = 1;
-
-	if (poll) {
-		schd = schedule_delayed_work(&tsc->work,
-					msecs_to_jiffies(tsc->poll_period));
-		if (schd)
-			tsc->polling = 1;
-		else {
-			tsc->polling = 0;
-			dev_err(tsc->dev, "re-schedule failed");
-		}
-	} else
-		tsc->polling = 0;
-
-	ret = tps6507x_adc_standby(tsc);
+	tps6507x_adc_standby(tsc);
 }
 
 static int tps6507x_ts_probe(struct platform_device *pdev)
 {
-	int error;
-	struct tps6507x_ts *tsc;
 	struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
-	struct touchscreen_init_data *init_data;
+	const struct tps6507x_board *tps_board;
+	const struct touchscreen_init_data *init_data;
+	struct tps6507x_ts *tsc;
+	struct input_polled_dev *poll_dev;
 	struct input_dev *input_dev;
-	struct tps6507x_board *tps_board;
-	int schd;
+	int error;
 
-	/**
+	/*
 	 * tps_board points to pmic related constants
 	 * coming from the board-evm file.
 	 */
-
-	tps_board = (struct tps6507x_board *)tps6507x_dev->dev->platform_data;
-
+	tps_board = dev_get_platdata(tps6507x_dev->dev);
 	if (!tps_board) {
 		dev_err(tps6507x_dev->dev,
 			"Could not find tps6507x platform data\n");
-		return -EIO;
+		return -ENODEV;
 	}
 
-	/**
+	/*
 	 * init_data points to array of regulator_init structures
 	 * coming from the board-evm file.
 	 */
-
 	init_data = tps_board->tps6507x_ts_init_data;
 
 	tsc = kzalloc(sizeof(struct tps6507x_ts), GFP_KERNEL);
 	if (!tsc) {
 		dev_err(tps6507x_dev->dev, "failed to allocate driver data\n");
-		error = -ENOMEM;
-		goto err0;
+		return -ENOMEM;
 	}
 
-	tps6507x_dev->ts = tsc;
 	tsc->mfd = tps6507x_dev;
 	tsc->dev = tps6507x_dev->dev;
-	input_dev = input_allocate_device();
-	if (!input_dev) {
-		dev_err(tsc->dev, "Failed to allocate input device.\n");
+	tsc->min_pressure = init_data ?
+			init_data->min_pressure : TPS_DEFAULT_MIN_PRESSURE;
+
+	snprintf(tsc->phys, sizeof(tsc->phys),
+		 "%s/input0", dev_name(tsc->dev));
+
+	poll_dev = input_allocate_polled_device();
+	if (!poll_dev) {
+		dev_err(tsc->dev, "Failed to allocate polled input device.\n");
 		error = -ENOMEM;
-		goto err1;
+		goto err_free_mem;
 	}
 
+	tsc->poll_dev = poll_dev;
+
+	poll_dev->private = tsc;
+	poll_dev->poll = tps6507x_ts_poll;
+	poll_dev->poll_interval = init_data ?
+			init_data->poll_period : TSC_DEFAULT_POLL_PERIOD;
+
+	input_dev = poll_dev->input;
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 
···
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_10BIT, 0, 0);
 
 	input_dev->name = "TPS6507x Touchscreen";
-	input_dev->id.bustype = BUS_I2C;
-	input_dev->dev.parent = tsc->dev;
-
-	snprintf(tsc->phys, sizeof(tsc->phys),
-		 "%s/input0", dev_name(tsc->dev));
 	input_dev->phys = tsc->phys;
-
-	dev_dbg(tsc->dev, "device: %s\n", input_dev->phys);
-
-	input_set_drvdata(input_dev, tsc);
-
-	tsc->input_dev = input_dev;
-
-	INIT_DELAYED_WORK(&tsc->work, tps6507x_ts_handler);
-
+	input_dev->dev.parent = tsc->dev;
+	input_dev->id.bustype = BUS_I2C;
 	if (init_data) {
-		tsc->poll_period = init_data->poll_period;
-		tsc->vref = init_data->vref;
-		tsc->min_pressure = init_data->min_pressure;
 		input_dev->id.vendor = init_data->vendor;
 		input_dev->id.product = init_data->product;
 		input_dev->id.version = init_data->version;
-	} else {
-		tsc->poll_period = TSC_DEFAULT_POLL_PERIOD;
-		tsc->min_pressure = TPS_DEFAULT_MIN_PRESSURE;
 	}
 
 	error = tps6507x_adc_standby(tsc);
 	if (error)
-		goto err2;
+		goto err_free_polled_dev;
 
-	error = input_register_device(input_dev);
+	error = input_register_polled_device(poll_dev);
 	if (error)
-		goto err2;
+		goto err_free_polled_dev;
 
-	schd = schedule_delayed_work(&tsc->work,
-				     msecs_to_jiffies(tsc->poll_period));
-
-	if (schd)
-		tsc->polling = 1;
-	else {
-		tsc->polling = 0;
-		dev_err(tsc->dev, "schedule failed");
-		goto err2;
-	 }
-	platform_set_drvdata(pdev, tps6507x_dev);
+	platform_set_drvdata(pdev, tsc);
 
 	return 0;
 
-err2:
-	cancel_delayed_work_sync(&tsc->work);
-	input_free_device(input_dev);
-err1:
+err_free_polled_dev:
+	input_free_polled_device(poll_dev);
+err_free_mem:
 	kfree(tsc);
-	tps6507x_dev->ts = NULL;
-err0:
 	return error;
 }
 
 static int tps6507x_ts_remove(struct platform_device *pdev)
 {
-	struct tps6507x_dev *tps6507x_dev = platform_get_drvdata(pdev);
-	struct tps6507x_ts *tsc = tps6507x_dev->ts;
-	struct input_dev *input_dev = tsc->input_dev;
+	struct tps6507x_ts *tsc = platform_get_drvdata(pdev);
+	struct input_polled_dev *poll_dev = tsc->poll_dev;
 
-	cancel_delayed_work_sync(&tsc->work);
+	input_unregister_polled_device(poll_dev);
+	input_free_polled_device(poll_dev);
 
-	input_unregister_device(input_dev);
-
-	tps6507x_dev->ts = NULL;
 	kfree(tsc);
 
 	return 0;

drivers/input/touchscreen/w90p910_ts.c

···
 	input_unregister_device(w90p910_ts->input);
 	kfree(w90p910_ts);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/touchscreen/wacom_i2c.c

···
 /*
  * Wacom Penabled Driver for I2C
  *
- * Copyright (c) 2011 Tatsunosuke Tobita, Wacom.
+ * Copyright (c) 2011 - 2013 Tatsunosuke Tobita, Wacom.
  * <[e-mail]>
  *
  * This program is free software; you can redistribute it
···
 #define WACOM_CMD_THROW0	0x05
 #define WACOM_CMD_THROW1	0x00
 #define WACOM_QUERY_SIZE	19
-#define WACOM_RETRY_CNT		100
 
 struct wacom_features {
 	int x_max;
···
 	struct i2c_client *client;
 	struct input_dev *input;
 	u8 data[WACOM_QUERY_SIZE];
+	bool prox;
+	int tool;
 };
 
 static int wacom_query_device(struct i2c_client *client,
···
 	y = le16_to_cpup((__le16 *)&data[6]);
 	pressure = le16_to_cpup((__le16 *)&data[8]);
 
+	if (!wac_i2c->prox)
+		wac_i2c->tool = (data[3] & 0x0c) ?
+			BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+
+	wac_i2c->prox = data[3] & 0x20;
+
 	input_report_key(input, BTN_TOUCH, tsw || ers);
-	input_report_key(input, BTN_TOOL_PEN, tsw);
-	input_report_key(input, BTN_TOOL_RUBBER, ers);
+	input_report_key(input, wac_i2c->tool, wac_i2c->prox);
 	input_report_key(input, BTN_STYLUS, f1);
 	input_report_key(input, BTN_STYLUS2, f2);
 	input_report_abs(input, ABS_X, x);

drivers/tty/sysrq.c

···
 #include <linux/uaccess.h>
 #include <linux/moduleparam.h>
 #include <linux/jiffies.h>
+#include <linux/syscalls.h>
 
 #include <asm/ptrace.h>
 #include <asm/irq_regs.h>
···
 
 	/* reset sequence handling */
 	bool reset_canceled;
+	bool reset_requested;
 	unsigned long reset_keybit[BITS_TO_LONGS(KEY_CNT)];
 	int reset_seq_len;
 	int reset_seq_cnt;
···
 	state->reset_seq_version = sysrq_reset_seq_version;
 }
 
-static void sysrq_do_reset(unsigned long dummy)
+static void sysrq_do_reset(unsigned long _state)
 {
-	__handle_sysrq(sysrq_xlate[KEY_B], false);
+	struct sysrq_state *state = (struct sysrq_state *) _state;
+
+	state->reset_requested = true;
+
+	sys_sync();
+	kernel_restart(NULL);
 }
 
 static void sysrq_handle_reset_request(struct sysrq_state *state)
 {
+	if (state->reset_requested)
+		__handle_sysrq(sysrq_xlate[KEY_B], false);
+
 	if (sysrq_reset_downtime_ms)
 		mod_timer(&state->keyreset_timer,
 			jiffies + msecs_to_jiffies(sysrq_reset_downtime_ms));
 	else
-		sysrq_do_reset(0);
+		sysrq_do_reset((unsigned long)state);
 }
 
 static void sysrq_detect_reset_sequence(struct sysrq_state *state,
···
 	sysrq->handle.handler = handler;
 	sysrq->handle.name = "sysrq";
 	sysrq->handle.private = sysrq;
-	setup_timer(&sysrq->keyreset_timer, sysrq_do_reset, 0);
+	setup_timer(&sysrq->keyreset_timer,
+		    sysrq_do_reset, (unsigned long)sysrq);
 
 	error = input_register_handle(&sysrq->handle);
 	if (error) {

include/linux/input/tps6507x-ts.h

···
 /* Board specific touch screen initial values */
 struct touchscreen_init_data {
 	int	poll_period;	/* ms */
-	int	vref;		/* non-zero to leave vref on */
 	__u16	min_pressure;	/* min reading to be treated as a touch */
 	__u16	vendor;
 	__u16	product;

include/linux/mfd/tps6507x.h

···
 
 	/* Client devices */
 	struct tps6507x_pmic *pmic;
-	struct tps6507x_ts *ts;
 };
 
 #endif /*  __LINUX_MFD_TPS6507X_H */

include/linux/platform_data/cyttsp4.h

···
+/*
+ * Header file for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <[e-mail]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com ([e-mail])
+ *
+ */
+#ifndef _CYTTSP4_H_
+#define _CYTTSP4_H_
+
+#define CYTTSP4_MT_NAME "cyttsp4_mt"
+#define CYTTSP4_I2C_NAME "cyttsp4_i2c_adapter"
+#define CYTTSP4_SPI_NAME "cyttsp4_spi_adapter"
+
+#define CY_TOUCH_SETTINGS_MAX 32
+
+struct touch_framework {
+	const uint16_t  *abs;
+	uint8_t         size;
+	uint8_t         enable_vkeys;
+} __packed;
+
+struct cyttsp4_mt_platform_data {
+	struct touch_framework *frmwrk;
+	unsigned short flags;
+	char const *inp_dev_name;
+};
+
+struct touch_settings {
+	const uint8_t *data;
+	uint32_t size;
+	uint8_t tag;
+} __packed;
+
+struct cyttsp4_core_platform_data {
+	int irq_gpio;
+	int rst_gpio;
+	int level_irq_udelay;
+	int (*xres)(struct cyttsp4_core_platform_data *pdata,
+		struct device *dev);
+	int (*init)(struct cyttsp4_core_platform_data *pdata,
+		int on, struct device *dev);
+	int (*power)(struct cyttsp4_core_platform_data *pdata,
+		int on, struct device *dev, atomic_t *ignore_irq);
+	int (*irq_stat)(struct cyttsp4_core_platform_data *pdata,
+		struct device *dev);
+	struct touch_settings *sett[CY_TOUCH_SETTINGS_MAX];
+};
+
+struct cyttsp4_platform_data {
+	struct cyttsp4_core_platform_data *core_pdata;
+	struct cyttsp4_mt_platform_data *mt_pdata;
+};
+
+#endif /* _CYTTSP4_H_ */

include/linux/platform_data/keypad-pxa27x.h

···
 struct pxa27x_keypad_platform_data {
 
 	/* code map for the matrix keys */
+	const struct matrix_keymap_data *matrix_keymap_data;
 	unsigned int	matrix_key_rows;
 	unsigned int	matrix_key_cols;
-	unsigned int	*matrix_key_map;
-	int		matrix_key_map_size;
 
 	/* direct keys */
 	int		direct_key_num;