Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
"We had a small batch of fixes before -rc1, but here is a larger one.
It contains a backmerge of 4.12-rc1 since some of the downstream
branches we merge had that as base; at the same time we already had
merged contents before -rc1 and rebase wasn't the right solution.

A mix of random smaller fixes and a few things worth pointing out:

- We've started telling people to avoid cross-tree shared branches if
all they're doing is picking up one or two DT-used constants from a
shared include file, and instead to use the numeric values on first
submission. Follow-up moving over to symbolic names are sent in
right after -rc1, i.e. here. It's only a few minor patches of this
type.

- Linus Walleij and others are resurrecting the 'Gemini' platform,
and wanted a cut-down platform-specific defconfig for it. So I
picked that up for them.

- Rob Herring ran 'savedefconfig' on arm64, it's a bit churny but it
helps people to prepare patches since it's a pain when defconfig
and current savedefconfig contents differs too much.

- Devicetree additions for some pinctrl drivers for Armada that were
merged this window. I'd have preferred to see those earlier but
it's not a huge deail.

The biggest change worth pointing out though since it's touching other
parts of the tree: We added prefixes to be used when cross-including
DT contents between arm64 and arm, allowing someone to #include
<arm/foo.dtsi> from arm64, and likewise. As part of that, we needed
arm/foo.dtsi to work on arm as well. The way I suggested this to Heiko
resulted in a recursive symlink.

Instead, I've now moved it out of arch/*/boot/dts/include, into a
shared location under scripts/dtc. While I was at it, I consolidated
so all architectures now behave the same way in this manner.

Rob Herring (DT maintainer) has acked it. I cc:d most other arch
maintainers but nobody seems to care much; it doesn't really affect
them since functionality is unchanged for them by default"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
arm64: dts: rockchip: fix include reference
firmware: ti_sci: fix strncat length check
ARM: remove duplicate 'const' annotations'
arm64: defconfig: enable options needed for QCom DB410c board
arm64: defconfig: sync with savedefconfig
ARM: configs: add a gemini defconfig
devicetree: Move include prefixes from arch to separate directory
ARM: dts: dra7: Reduce cpu thermal shutdown temperature
memory: omap-gpmc: Fix debug output for access width
ARM: dts: LogicPD Torpedo: Fix camera pin mux
ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES
ARM: dts: gta04: fix polarity of clocks for mcbsp4
ARM: dts: dra7: Add power hold and power controller properties to palmas
soc: imx: add PM dependency for IMX7_PM_DOMAINS
ARM: dts: imx6sx-sdb: Remove OPP override
ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin
soc: bcm: brcmstb: Correctly match 7435 SoC
tee: add ARM_SMCCC dependency
ARM: omap2+: make omap4_get_cpu1_ns_pa_addr declaration usable
ARM64: dts: mediatek: configure some fixed mmc parameters
...

arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi

···
 / {
 	aliases {
-		ethernet = &ethernet;
+		ethernet0 = &ethernet;
 	};
 };
 

arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi

···
 / {
 	aliases {
-		ethernet = &ethernet;
+		ethernet0 = &ethernet;
 	};
 };
 

arch/arm/boot/dts/bcm283x.dtsi

···
 				brcm,pins = <0 1>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c0_gpio32: i2c0_gpio32 {
-				brcm,pins = <32 34>;
+			i2c0_gpio28: i2c0_gpio28 {
+				brcm,pins = <28 29>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
 			i2c0_gpio44: i2c0_gpio44 {
···
 			/* Separate from the uart0_gpio14 group
 			 * because it conflicts with spi1_gpio16, and
 			 * people often run uart0 on the two pins
-			 * without flow contrl.
+			 * without flow control.
 			 */
 			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
 				brcm,pins = <16 17>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
-			uart0_gpio30: uart0_gpio30 {
+			uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
 				brcm,pins = <30 31>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
-			uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 {
+			uart0_gpio32: uart0_gpio32 {
 				brcm,pins = <32 33>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			uart0_gpio36: uart0_gpio36 {
+				brcm,pins = <36 37>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
+				brcm,pins = <38 39>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
 			uart1_gpio14: uart1_gpio14 {
···
 			uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
 				brcm,pins = <30 31>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_gpio36: uart1_gpio36 {
-				brcm,pins = <36 37 38 39>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 			uart1_gpio40: uart1_gpio40 {
 				brcm,pins = <40 41>;

arch/arm/boot/dts/dra7-evm.dts

···
 	tps659038: tps659038@58 {
 		compatible = "ti,tps659038";
 		reg = <0x58>;
+		ti,palmas-override-powerhold;
+		ti,system-power-controller;
 
 		tps659038_pmic {
 			compatible = "ti,tps659038-pmic";

arch/arm/boot/dts/dra7.dtsi

···
 	coefficients = <0 2000>;
 };
 
+&cpu_crit {
+	temperature = <120000>; /* milli Celsius */
+};
+
 /include/ "dra7xx-clocks.dtsi"

arch/arm/boot/dts/imx53-qsrb.dts

···
 	imx53-qsrb {
 		pinctrl_pmic: pmicgrp {
 			fsl,pins = <
-				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1e4 /* IRQ */
+				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1c4 /* IRQ */
 			>;
 		};
 	};

arch/arm/boot/dts/imx6sx-sdb.dts

···
 	model = "Freescale i.MX6 SoloX SDB RevB Board";
 };
 
-&cpu0 {
-	operating-points = <
-		/* kHz    uV */
-		996000  1250000
-		792000  1175000
-		396000  1175000
-		198000  1175000
-		>;
-	fsl,soc-operating-points = <
-		/* ARM kHz      SOC uV */
-		996000	1250000
-		792000	1175000
-		396000	1175000
-		198000  1175000
-	>;
-};
-
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";

arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts

···
 			OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0)   /* cam_xclka.cam_xclka */
 			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0)   /* cam_pclk.cam_pclk */
 
-			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
-			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
-			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
+			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
+			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
 			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0)   /* cam_d3.cam_d3 */
 			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0)   /* cam_d4.cam_d4 */
 			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0)   /* cam_d5.cam_d5 */

arch/arm/boot/dts/mt7623.dtsi

···
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
 	};
 
 	watchdog: watchdog@10007000 {

arch/arm/boot/dts/omap3-gta04.dtsi

···
 		simple-audio-card,bitclock-master = <&telephony_link_master>;
 		simple-audio-card,frame-master = <&telephony_link_master>;
 		simple-audio-card,format = "i2s";
-
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-inversion;
 		simple-audio-card,cpu {
 			sound-dai = <&mcbsp4>;
 		};

arch/arm/boot/dts/omap4-panda-a4.dts

···
 /* Pandaboard Rev A4+ have external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
 		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
 		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;

arch/arm/boot/dts/omap4-panda-es.dts

···
 /* PandaboardES has external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
 		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
 		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;

arch/arm/configs/gemini_defconfig

···
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_USER_NS=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_GEMINI=y
+CONFIG_PCI=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_CMDLINE="console=ttyS0,115200n8"
+CONFIG_KEXEC=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_GEMINI_WATCHDOG=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_FOTG210_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GEMINI=y
+CONFIG_DMADEVICES=y
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_ROMFS_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y

arch/arm/mach-at91/pm.c

···
 	{ .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
 };
 
-static const struct of_device_id const ramc_ids[] __initconst = {
+static const struct of_device_id ramc_ids[] __initconst = {
 	{ .compatible = "atmel,at91rm9200-sdramc", .data = &ramc_infos[0] },
 	{ .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },

arch/arm/mach-bcm/bcm_kona_smc.c

···
 	unsigned result;
 };
 
-static const struct of_device_id const bcm_kona_smc_ids[] __initconst = {
+static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
 	{.compatible = "brcm,kona-smc"},
 	{.compatible = "bcm,kona-smc"}, /* deprecated name */
 	{},

arch/arm/mach-cns3xxx/core.c

···
 	.power_off	= csn3xxx_usb_power_off,
 };
 
-static const struct of_dev_auxdata const cns3xxx_auxdata[] __initconst = {
+static const struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
 	{ "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
 	{ "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
 	{ "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },

arch/arm/mach-omap2/common.h

···
 extern const struct smp_operations omap4_smp_ops;
 #endif
 
+extern u32 omap4_get_cpu1_ns_pa_addr(void);
+
 #if defined(CONFIG_SMP) && defined(CONFIG_PM)
 extern int omap4_mpuss_init(void);
 extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
 extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
-extern u32 omap4_get_cpu1_ns_pa_addr(void);
 #else
 static inline int omap4_enter_lowpower(unsigned int cpu,
 					unsigned int power_state)

arch/arm/mach-omap2/omap-mpuss-lowpower.c

···
 {}
 #endif
 
-u32 omap4_get_cpu1_ns_pa_addr(void)
-{
-	return old_cpu1_ns_pa_addr;
-}
-
 /**
  * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
  * The purpose of this function is to manage low power programming
···
 }
 
 #endif
+
+u32 omap4_get_cpu1_ns_pa_addr(void)
+{
+	return old_cpu1_ns_pa_addr;
+}
 
 /*
  * For kexec, we must set CPU1_WAKEUP_NS_PA_ADDR to point to

arch/arm/mach-omap2/omap-smp.c

···
 
 	cpu1_startup_pa = readl_relaxed(cfg.wakeupgen_base +
 					OMAP_AUX_CORE_BOOT_1);
-	cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr();
 
 	/* Did the configured secondary_startup() get overwritten? */
 	if (!omap4_smp_cpu1_startup_valid(cpu1_startup_pa))
···
 	 * If omap4 or 5 has NS_PA_ADDR configured, CPU1 may be in a
 	 * deeper idle state in WFI and will wake to an invalid address.
 	 */
-	if ((soc_is_omap44xx() || soc_is_omap54xx()) &&
-	    !omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr))
-		needs_reset = true;
+	if ((soc_is_omap44xx() || soc_is_omap54xx())) {
+		cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr();
+		if (!omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr))
+			needs_reset = true;
+	} else {
+		cpu1_ns_pa_addr = 0;
+	}
 
 	if (!needs_reset || !c->cpu1_rstctrl_va)
 		return;

arch/arm/mach-omap2/prm_common.c

···
 };
 #endif
 
-static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = {
+static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
 #ifdef CONFIG_SOC_AM33XX
 	{ .compatible = "ti,am3-prcm", .data = &am3_prm_data },
 #endif

arch/arm/mach-omap2/vc.c

···
 	u8 hsscll_12;
 };
 
-static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = {
+static const struct i2c_init_data omap4_i2c_timing_data[] __initconst = {
 	{
 		.load = 50,
 		.loadbits = 0x3,

arch/arm/mach-spear/time.c

···
 	setup_irq(irq, &spear_timer_irq);
 }
 
-static const struct of_device_id const timer_of_match[] __initconst = {
+static const struct of_device_id timer_of_match[] __initconst = {
 	{ .compatible = "st,spear-timer", },
 	{ },
 };

arch/arm64/Kconfig.platforms

···
 	select ARMADA_AP806_SYSCON
 	select ARMADA_CP110_SYSCON
 	select ARMADA_37XX_CLK
+	select GPIOLIB
+	select GPIOLIB_IRQCHIP
 	select MVEBU_ODMI
 	select MVEBU_PIC
+	select OF_GPIO
+	select PINCTRL
+	select PINCTRL_ARMADA_37XX
 	help
 	  This enables support for Marvell EBU familly, including:
 	   - Armada 3700 SoC Family

arch/arm64/boot/dts/marvell/armada-3720-db.dts

···
 };
 
 &i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 
 	gpio_exp: pca9555@22 {
···
 
 &spi0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
 
 	m25p80@0 {
 		compatible = "jedec,spi-nor";
···
 
 /* Exported on the micro USB connector CON32 through an FTDI */
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
 	status = "okay";
 };
 
···
 };
 
 &eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
 	phy-mode = "rgmii-id";
 	phy = <&phy0>;
 	status = "okay";

arch/arm64/boot/dts/marvell/armada-37xx.dtsi

···
 				#clock-cells = <1>;
 			};
 
-			gpio1: gpio@13800 {
-				compatible = "marvell,mvebu-gpio-3700",
+			pinctrl_nb: pinctrl@13800 {
+				compatible = "marvell,armada3710-nb-pinctrl",
 				"syscon", "simple-mfd";
-				reg = <0x13800 0x500>;
+				reg = <0x13800 0x100>, <0x13C00 0x20>;
+				gpionb: gpio {
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_nb 0 0 36>;
+					gpio-controller;
+					interrupts =
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				};
 
 				xtalclk: xtal-clk {
 					compatible = "marvell,armada-3700-xtal-clock";
 					clock-output-names = "xtal";
 					#clock-cells = <0>;
 				};
+
+				spi_quad_pins: spi-quad-pins {
+					groups = "spi_quad";
+					function = "spi";
+				};
+
+				i2c1_pins: i2c1-pins {
+					groups = "i2c1";
+					function = "i2c";
+				};
+
+				i2c2_pins: i2c2-pins {
+					groups = "i2c2";
+					function = "i2c";
+				};
+
+				uart1_pins: uart1-pins {
+					groups = "uart1";
+					function = "uart";
+				};
+
+				uart2_pins: uart2-pins {
+					groups = "uart2";
+					function = "uart";
+				};
+			};
+
+			pinctrl_sb: pinctrl@18800 {
+				compatible = "marvell,armada3710-sb-pinctrl",
+				"syscon", "simple-mfd";
+				reg = <0x18800 0x100>, <0x18C00 0x20>;
+				gpiosb: gpio {
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_sb 0 0 29>;
+					gpio-controller;
+					interrupts =
+					<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				rgmii_pins: mii-pins {
+					groups = "rgmii";
+					function = "mii";
+				};
+
 			};
 
 			eth0: ethernet@30000 {

arch/arm64/boot/dts/mediatek/mt8173-evb.dts

···
 	bus-width = <8>;
 	max-frequency = <50000000>;
 	cap-mmc-highspeed;
+	mediatek,hs200-cmd-int-delay=<26>;
+	mediatek,hs400-cmd-int-delay=<14>;
+	mediatek,hs400-cmd-resp-sel-rising;
 	vmmc-supply = <&mt6397_vemc_3v3_reg>;
 	vqmmc-supply = <&mt6397_vio18_reg>;
 	non-removable;

arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts

···
 
 /dts-v1/;
 #include "rk3399-gru.dtsi"
-#include <include/dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 /*
  * Kevin-specific things

arch/arm64/configs/defconfig

···
 CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
···
 CONFIG_ARCH_ZX=y
 CONFIG_ARCH_ZYNQMP=y
 CONFIG_PCI=y
-CONFIG_PCI_MSI=y
 CONFIG_PCI_IOV=y
-CONFIG_PCI_AARDVARK=y
-CONFIG_PCIE_RCAR=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_XGENE=y
 CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_HISI=y
 CONFIG_PCIE_QCOM=y
 CONFIG_PCIE_ARMADA_8K=y
+CONFIG_PCI_AARDVARK=y
+CONFIG_PCIE_RCAR=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_XGENE=y
 CONFIG_ARM64_VA_BITS_48=y
 CONFIG_SCHED_MC=y
 CONFIG_NUMA=y
···
 CONFIG_TRANSPARENT_HUGEPAGE=y
 CONFIG_CMA=y
 CONFIG_SECCOMP=y
-CONFIG_XEN=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
+CONFIG_XEN=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_COMPAT=y
-CONFIG_CPU_IDLE=y
 CONFIG_HIBERNATION=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_CPU_FREQ=y
···
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
 CONFIG_VIRTIO_BLK=y
-CONFIG_EEPROM_AT25=m
 CONFIG_SRAM=y
+CONFIG_EEPROM_AT25=m
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_SAS_ATA=y
···
 CONFIG_AHCI_MVEBU=y
 CONFIG_AHCI_XGENE=y
 CONFIG_AHCI_QORIQ=y
-CONFIG_SATA_RCAR=y
 CONFIG_SATA_SIL24=y
+CONFIG_SATA_RCAR=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
 CONFIG_NETDEVICES=y
···
 CONFIG_E1000E=y
 CONFIG_IGB=y
 CONFIG_IGBVF=y
-CONFIG_MVPP2=y
 CONFIG_MVNETA=y
+CONFIG_MVPP2=y
 CONFIG_SKY2=y
 CONFIG_RAVB=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=m
-CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BUS_MUX_MMIOREG=y
 CONFIG_MESON_GXL_PHY=m
 CONFIG_MICREL_PHY=y
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
+CONFIG_REALTEK_PHY=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_RTL8152=m
···
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MESON=y
+CONFIG_SERIAL_MESON_CONSOLE=y
 CONFIG_SERIAL_SAMSUNG=y
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
 CONFIG_SERIAL_TEGRA=y
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=11
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_MESON=y
-CONFIG_SERIAL_MESON_CONSOLE=y
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_SERIAL_XILINX_PS_UART=y
···
 CONFIG_I2C_RCAR=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
 CONFIG_SPI=y
-CONFIG_SPI_MESON_SPIFC=m
 CONFIG_SPI_BCM2835=m
 CONFIG_SPI_BCM2835AUX=m
+CONFIG_SPI_MESON_SPIFC=m
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_QUP=y
-CONFIG_SPI_SPIDEV=m
 CONFIG_SPI_S3C64XX=y
+CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_MAX77620=y
···
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_MAX77620=y
 CONFIG_POWER_RESET_MSM=y
-CONFIG_BATTERY_BQ27XXX=y
 CONFIG_POWER_RESET_XGENE=y
 CONFIG_POWER_RESET_SYSCON=y
+CONFIG_BATTERY_BQ27XXX=y
+CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_INA2XX=m
-CONFIG_SENSORS_ARM_SCPI=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_EMULATION=y
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
-CONFIG_BCM2835_THERMAL=y
+CONFIG_THERMAL_EMULATION=y
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_WATCHDOG=y
-CONFIG_BCM2835_WDT=y
-CONFIG_RENESAS_WDT=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_MESON_GXBB_WATCHDOG=m
 CONFIG_MESON_WATCHDOG=m
-CONFIG_MFD_EXYNOS_LPASS=m
-CONFIG_MFD_MAX77620=y
-CONFIG_MFD_RK808=y
-CONFIG_MFD_SPMI_PMIC=y
-CONFIG_MFD_SEC_CORE=y
-CONFIG_MFD_HI655X_PMIC=y
-CONFIG_REGULATOR=y
+CONFIG_RENESAS_WDT=y
+CONFIG_BCM2835_WDT=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_I2C=y
+CONFIG_MFD_EXYNOS_LPASS=m
+CONFIG_MFD_HI655X_PMIC=y
+CONFIG_MFD_MAX77620=y
+CONFIG_MFD_SPMI_PMIC=y
+CONFIG_MFD_RK808=y
+CONFIG_MFD_SEC_CORE=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_HI655X=y
···
 CONFIG_DRM_EXYNOS_HDMI=y
 CONFIG_DRM_EXYNOS_MIC=y
 CONFIG_DRM_RCAR_DU=m
-CONFIG_DRM_RCAR_HDMI=y
 CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_RCAR_VSP=y
 CONFIG_DRM_TEGRA=m
-CONFIG_DRM_VC4=m
 CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_VC4=m
 CONFIG_DRM_HISI_KIRIN=m
 CONFIG_DRM_MESON=m
 CONFIG_FB=y
···
 CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_BCM2835_SOC_I2S=m
-CONFIG_SND_SOC_RCAR=y
 CONFIG_SND_SOC_SAMSUNG=y
+CONFIG_SND_SOC_RCAR=y
 CONFIG_SND_SOC_AK4613=y
 CONFIG_USB=y
 CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USB_XHCI_RCAR=y
-CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_XHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MSM=y
+CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_OHCI_EXYNOS=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_EXYNOS=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_RENESAS_USBHS=m
 CONFIG_USB_STORAGE=y
-CONFIG_USB_DWC2=y
 CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_USB_ISP1760=y
 CONFIG_USB_HSIC_USB3503=y
 CONFIG_USB_MSM_OTG=y
+CONFIG_USB_QCOM_8X16_PHY=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_MESON_GX=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ACPI=y
 CONFIG_MMC_SDHCI_PLTFM=y
···
 CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_MMC_SDHCI_CADENCE=y
 CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_MMC_MESON_GX=y
 CONFIG_MMC_SDHCI_MSM=y
 CONFIG_MMC_SPI=y
 CONFIG_MMC_SDHI=y
···
 CONFIG_MMC_DW_K3=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SUNXI=y
-CONFIG_MMC_SDHCI_XENON=y
 CONFIG_MMC_BCM2835=y
+CONFIG_MMC_SDHCI_XENON=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_SYSCON=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_S5M=y
 CONFIG_RTC_DRV_DS3232=y
 CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_S3C=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_SUN6I=y
-CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_TEGRA=y
 CONFIG_RTC_DRV_XGENE=y
-CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2835=m
 CONFIG_MV_XOR_V2=y
 CONFIG_PL330_DMA=y
-CONFIG_DMA_BCM2835=m
 CONFIG_TEGRA20_APB_DMA=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_QCOM_HIDMA_MGMT=y
···
 CONFIG_VIRTIO_MMIO=y
 CONFIG_XEN_GNTDEV=y
 CONFIG_XEN_GRANT_DEV_ALLOC=y
+CONFIG_COMMON_CLK_RK808=y
 CONFIG_COMMON_CLK_SCPI=y
 CONFIG_COMMON_CLK_CS2000_CP=y
 CONFIG_COMMON_CLK_S2MPS11=y
-CONFIG_COMMON_CLK_PWM=y
-CONFIG_COMMON_CLK_RK808=y
 CONFIG_CLK_QORIQ=y
+CONFIG_COMMON_CLK_PWM=y
 CONFIG_COMMON_CLK_QCOM=y
+CONFIG_QCOM_CLK_SMD_RPM=y
 CONFIG_MSM_GCC_8916=y
 CONFIG_MSM_GCC_8994=y
 CONFIG_MSM_MMCC_8996=y
 CONFIG_HWSPINLOCK_QCOM=y
-CONFIG_MAILBOX=y
 CONFIG_ARM_MHU=y
 CONFIG_PLATFORM_MHU=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_HI6220_MBOX=y
 CONFIG_ARM_SMMU=y
 CONFIG_ARM_SMMU_V3=y
+CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_QCOM_SMEM=y
-CONFIG_QCOM_SMD=y
 CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
 CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
 CONFIG_ARCH_TEGRA_186_SOC=y
 CONFIG_EXTCON_USB_GPIO=y
+CONFIG_IIO=y
+CONFIG_EXYNOS_ADC=y
 CONFIG_PWM=y
 CONFIG_PWM_BCM2835=m
-CONFIG_PWM_ROCKCHIP=y
-CONFIG_PWM_TEGRA=m
 CONFIG_PWM_MESON=m
-CONFIG_COMMON_RESET_HI6220=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_PWM_SAMSUNG=y
+CONFIG_PWM_TEGRA=m
 CONFIG_PHY_RCAR_GEN3_USB2=y
 CONFIG_PHY_HI6220_USB=y
+CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_PHY_ROCKCHIP_EMMC=y
-CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_XGENE=y
 CONFIG_PHY_TEGRA_XUSB=y
 CONFIG_ARM_SCPI_PROTOCOL=y
-CONFIG_ACPI=y
-CONFIG_IIO=y
-CONFIG_EXYNOS_ADC=y
-CONFIG_PWM_SAMSUNG=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_ACPI=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
···
 CONFIG_CUSE=m
 CONFIG_OVERLAY_FS=m
 CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_EFIVAR_FS=y
···
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_ECHAINIV=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_CRYPTO_DEV_SAFEXCEL=m
 CONFIG_ARM64_CRYPTO=y
 CONFIG_CRYPTO_SHA1_ARM64_CE=y
 CONFIG_CRYPTO_SHA2_ARM64_CE=y
 CONFIG_CRYPTO_GHASH_ARM64_CE=y
 CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
 CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set

drivers/firmware/ti_sci.c

···
 	info->debug_buffer[info->debug_region_size] = 0;
 
 	info->d = debugfs_create_file(strncat(debug_name, dev_name(dev),
-					      sizeof(debug_name)),
+					      sizeof(debug_name) -
+					      sizeof("ti_sci_debug@")),
 				      0444, NULL, info, &ti_sci_debug_fops);
 	if (IS_ERR(info->d))
 		return PTR_ERR(info->d);

drivers/memory/omap-gpmc.c

···
 	pr_info("gpmc cs%i access configuration:\n", cs);
 	GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1,  4,  4, "time-para-granularity");
 	GPMC_GET_RAW(GPMC_CS_CONFIG1,  8,  9, "mux-add-data");
-	GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13,
+	GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 12, 13, 1,
 			 GPMC_CONFIG1_DEVICESIZE_MAX, "device-width");
 	GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin");
 	GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write");

drivers/soc/bcm/brcmstb/common.c

···
 	{ .compatible = "brcm,bcm7420-sun-top-ctrl", },
 	{ .compatible = "brcm,bcm7425-sun-top-ctrl", },
 	{ .compatible = "brcm,bcm7429-sun-top-ctrl", },
-	{ .compatible = "brcm,bcm7425-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7435-sun-top-ctrl", },
 	{ .compatible = "brcm,brcmstb-sun-top-ctrl", },
 	{ }
 };

drivers/soc/imx/Kconfig

···
 
 config IMX7_PM_DOMAINS
 	bool "i.MX7 PM domains"
-	select PM_GENERIC_DOMAINS
 	depends on SOC_IMX7D || (COMPILE_TEST && OF)
+	depends on PM
+	select PM_GENERIC_DOMAINS
 	default y if SOC_IMX7D
 
 endmenu

drivers/tee/Kconfig

···
 # Generic Trusted Execution Environment Configuration
 config TEE
 	tristate "Trusted Execution Environment support"
+	depends on HAVE_ARM_SMCCC || COMPILE_TEST
 	select DMA_SHARED_BUFFER
 	select GENERIC_ALLOCATOR
 	help

include/linux/soc/renesas/rcar-rst.h

···
 #ifndef __LINUX_SOC_RENESAS_RCAR_RST_H__
 #define __LINUX_SOC_RENESAS_RCAR_RST_H__
 
+#if defined(CONFIG_ARCH_RCAR_GEN1) || defined(CONFIG_ARCH_RCAR_GEN2) || \
+    defined(CONFIG_ARCH_R8A7795) || defined(CONFIG_ARCH_R8A7796)
 int rcar_rst_read_mode_pins(u32 *mode);
+#else
+static inline int rcar_rst_read_mode_pins(u32 *mode) { return -ENODEV; }
+#endif
 
 #endif /* __LINUX_SOC_RENESAS_RCAR_RST_H__ */

scripts/Makefile.lib

···
 
 dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc                    \
 		 -I$(srctree)/arch/$(SRCARCH)/boot/dts                   \
-		 -I$(srctree)/arch/$(SRCARCH)/boot/dts/include           \
+		 -I$(srctree)/scripts/dtc/include-prefixes               \
 		 -I$(srctree)/drivers/of/testcase-data                   \
 		 -undef -D__DTS__