Merge tag 'qcom-arm64-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/fixes

Qualcomm ARM64 Devicetree fixes for v6.3

This correct SIM card selection on the two newly introduced
MSM8916-based USB modems.

The firmware-name for the first CDSP is corrected on the SA8540P Ride
board.

The PCIe controller in SC7280 is marked cache-coherent, which resolves
seen data corruption issues.

Labels are added to the vadc channel nodes on SC8280XP, as the Linux
driver was updated to not include the unit address when generating
device names and collisions thereby prevented registration of the
channels. Audio clocks and routing is corrected and a few regulators are
marked always-on for the Lenovo Thinkpad X13s, as their clients are not
fully described at this point.

SPI5 was accidentally enabled by default on SM6115, and is disabled
again.

CDSP on SM6375 is provided its power-domains, to appropriately vote for
during power up for the DSP.

The iommu mask for the PCIe controllers in SM8150 is updated, to match
what the hypervisor expects.

Th Venus firmware path is corrected on Xiaomi Mi Pad 5 Pro.

The UFS controller is marked cache coherent on SM8350 and SM8450.

The clocks for the second WSA macro on SM8450 is corrected, and given
its own clocks.

The bias-pull-up value for I2C pins are corrected on SM8550, to trigger
the selection of the strong pull. CPU compatibles and the base address
of the LPASS TLMM block are corrected.

* tag 'qcom-arm64-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
arm64: dts: qcom: sc8280xp-x13s: fix va dmic dai links and routing
arm64: dts: qcom: sc8280xp-x13s: fix dmic sample rate
arm64: dts: qcom: sc8280xp: fix lpass tx macro clocks
arm64: dts: qcom: sc8280xp: fix rx frame shapping info
arm64: dts: qcom: sm8450: correct WSA2 assigned clocks
arm64: dts: qcom: sc7280: Mark PCIe controller as cache coherent
arm64: dts: qcom: msm8916-ufi: Fix sim card selection pinctrl
arm64: dts: qcom: sm8250-xiaomi-elish: Correct venus firmware path
arm64: dts: qcom: sm8550: Use correct CPU compatibles
arm64: dts: qcom: sm8550: Add bias pull up value to tlmm i2c data clk states
arm64: dts: qcom: sm6375: Add missing power-domain-named to CDSP
...

Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Arnd Bergmann <[e-mail]>

arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts

···
 &gpio_leds_default {
 	pins = "gpio81", "gpio82", "gpio83";
 };
-
-&sim_ctrl_default {
-	pins = "gpio1", "gpio2";
-};

arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts

···
 	gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
 };
 
+&mpss {
+	pinctrl-0 = <&sim_ctrl_default>;
+	pinctrl-names = "default";
+};
+
 &button_default {
 	pins = "gpio37";
 	bias-pull-down;
···
 	pins = "gpio20", "gpio21", "gpio22";
 };
 
-&sim_ctrl_default {
-	pins = "gpio1", "gpio2";
+/* This selects the external SIM card slot by default */
+&msmgpio {
+	sim_ctrl_default: sim-ctrl-default-state {
+		esim-sel-pins {
+			pins = "gpio0", "gpio3";
+			bias-disable;
+			output-low;
+		};
+
+		sim-en-pins {
+			pins = "gpio1";
+			bias-disable;
+			output-low;
+		};
+
+		sim-sel-pins {
+			pins = "gpio2";
+			bias-disable;
+			output-high;
+		};
+	};
 };

arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi

···
 };
 
 &mpss {
-	pinctrl-0 = <&sim_ctrl_default>;
-	pinctrl-names = "default";
-
 	status = "okay";
 };
 
···
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-	};
-
-	sim_ctrl_default: sim-ctrl-default-state {
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-		output-low;
 	};
 };

arch/arm64/boot/dts/qcom/sa8540p-ride.dts

···
 };
 
 &remoteproc_nsp0 {
-	firmware-name = "qcom/sa8540p/cdsp.mbn";
+	firmware-name = "qcom/sa8540p/cdsp0.mbn";
 	status = "okay";
 };
 

arch/arm64/boot/dts/qcom/sc7280.dtsi

···
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_clkreq_n>;
 
+			dma-coherent;
+
 			iommus = <&apps_smmu 0x1c80 0x1>;
 
 			iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,

arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts

···
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_s11b: smps11 {
···
 			regulator-min-microvolt = <1272000>;
 			regulator-max-microvolt = <1272000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_s12b: smps12 {
···
 			regulator-min-microvolt = <984000>;
 			regulator-max-microvolt = <984000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l3b: ldo3 {
···
 			regulator-min-microvolt = <3008000>;
 			regulator-max-microvolt = <3960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-always-on;
 		};
 	};
 
···
 	pmic-die-temp@3 {
 		reg = <PMK8350_ADC7_DIE_TEMP>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_die_temp";
 	};
 
 	xo-therm@44 {
 		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "pmk8350_xo_therm";
 	};
 
 	pmic-die-temp@103 {
 		reg = <PM8350_ADC7_DIE_TEMP(1)>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmc8280_1_die_temp";
 	};
 
 	sys-therm@144 {
 		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm1";
 	};
 
 	sys-therm@145 {
 		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm2";
 	};
 
 	sys-therm@146 {
 		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm3";
 	};
 
 	sys-therm@147 {
 		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm4";
 	};
 
 	pmic-die-temp@303 {
 		reg = <PM8350_ADC7_DIE_TEMP(3)>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmc8280_2_die_temp";
 	};
 
 	sys-therm@344 {
 		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm5";
 	};
 
 	sys-therm@345 {
 		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm6";
 	};
 
 	sys-therm@346 {
 		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm7";
 	};
 
 	sys-therm@347 {
 		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm8";
 	};
 
 	pmic-die-temp@403 {
 		reg = <PMR735A_ADC7_DIE_TEMP>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmr735a_die_temp";
 	};
 };
 
···
 		"VA DMIC0", "MIC BIAS1",
 		"VA DMIC1", "MIC BIAS1",
 		"VA DMIC2", "MIC BIAS3",
-		"TX DMIC0", "MIC BIAS1",
-		"TX DMIC1", "MIC BIAS2",
-		"TX DMIC2", "MIC BIAS3",
+		"VA DMIC0", "VA MIC BIAS1",
+		"VA DMIC1", "VA MIC BIAS1",
+		"VA DMIC2", "VA MIC BIAS3",
 		"TX SWR_ADC1", "ADC2_OUTPUT";
 
 	wcd-playback-dai-link {
···
 	va-dai-link {
 		link-name = "VA Capture";
 		cpu {
-			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
 		};
 
 		platform {
···
 
 	vdd-micb-supply = <&vreg_s10b>;
 
-	qcom,dmic-sample-rate = <600000>;
+	qcom,dmic-sample-rate = <4800000>;
 
 	status = "okay";
 };

arch/arm64/boot/dts/qcom/sc8280xp.dtsi

···
 			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
 			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0B 0x01 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
-			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
-			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0x00 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0x0f 0xff 0xff>;
 			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff>;
 			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
-			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
 
 			#sound-dai-cells = <1>;
 			#address-cells = <2>;
···
 					      <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wake";
 
-			clocks = <&vamacro>;
+			clocks = <&txmacro>;
 			clock-names = "iface";
 			label = "TX";
 			#sound-dai-cells = <1>;
···
 
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
-			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x03 0x03 0x03>;
-			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02 0x01>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
 			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
-			qcom,ports-word-length =	/bits/ 8 <0xff 0x00 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
-			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x01>;
 
 			status = "disabled";
 		};

arch/arm64/boot/dts/qcom/sm6115.dtsi

···
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				status = "disabled";
 			};
 		};
 

arch/arm64/boot/dts/qcom/sm6375.dtsi

···
 			clock-names = "xo";
 
 			power-domains = <&rpmpd SM6375_VDDCX>;
+			power-domain-names = "cx";
 
 			memory-region = <&pil_cdsp_mem>;
 

arch/arm64/boot/dts/qcom/sm8150.dtsi

···
 				      "slave_q2a",
 				      "tbu";
 
-			iommus = <&apps_smmu 0x1d80 0x7f>;
+			iommus = <&apps_smmu 0x1d80 0x3f>;
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
 
···
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1e00 0x7f>;
+			iommus = <&apps_smmu 0x1e00 0x3f>;
 			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
 				    <0x100 &apps_smmu 0x1e01 0x1>;
 

arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts

···
 };
 
 &venus {
-	firmware-name = "qcom/sm8250/elish/venus.mbn";
+	firmware-name = "qcom/sm8250/xiaomi/elish/venus.mbn";
 	status = "okay";
 };

arch/arm64/boot/dts/qcom/sm8350.dtsi

···
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			clock-names =
 				"core_clk",

arch/arm64/boot/dts/qcom/sm8450.dtsi

···
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
···
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;

arch/arm64/boot/dts/qcom/sm8550.dtsi

···
 
 		CPU0: cpu@0 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a510";
 			reg = <0 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
···
 
 		CPU1: cpu@100 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a510";
 			reg = <0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
···
 
 		CPU2: cpu@200 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a510";
 			reg = <0 0x200>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
···
 
 		CPU3: cpu@300 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a715";
 			reg = <0 0x300>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
···
 
 		CPU4: cpu@400 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a715";
 			reg = <0 0x400>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
···
 
 		CPU5: cpu@500 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a710";
 			reg = <0 0x500>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
···
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a710";
 			reg = <0 0x600>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
···
 
 		CPU7: cpu@700 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-x3";
 			reg = <0 0x700>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
···
 			required-opps = <&rpmhpd_opp_nom>;
 
 			iommus = <&apps_smmu 0x60 0x0>;
+			dma-coherent;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
···
 		lpass_tlmm: pinctrl@6e80000 {
 			compatible = "qcom,sm8550-lpass-lpi-pinctrl";
 			reg = <0 0x06e80000 0 0x20000>,
-			      <0 0x0725a000 0 0x10000>;
+			      <0 0x07250000 0 0x10000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&lpass_tlmm 0 0 23>;
···
 				pins = "gpio28", "gpio29";
 				function = "qup1_se0";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
···
 				pins = "gpio32", "gpio33";
 				function = "qup1_se1";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
···
 				pins = "gpio36", "gpio37";
 				function = "qup1_se2";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
···
 				pins = "gpio40", "gpio41";
 				function = "qup1_se3";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
···
 				pins = "gpio44", "gpio45";
 				function = "qup1_se4";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
···
 				pins = "gpio52", "gpio53";
 				function = "qup1_se5";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
···
 				pins = "gpio48", "gpio49";
 				function = "qup1_se6";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
···
 					pins = "gpio57";
 					function = "qup2_se0_l1_mira";
 					drive-strength = <2>;
-					bias-pull-up;
+					bias-pull-up = <2200>;
 				};
 
 				sda-pins {
 					pins = "gpio56";
 					function = "qup2_se0_l0_mira";
 					drive-strength = <2>;
-					bias-pull-up;
+					bias-pull-up = <2200>;
 				};
 			};
 
···
 				pins = "gpio60", "gpio61";
 				function = "qup2_se1";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
···
 				pins = "gpio64", "gpio65";
 				function = "qup2_se2";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
···
 				pins = "gpio68", "gpio69";
 				function = "qup2_se3";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
···
 				pins = "gpio2", "gpio3";
 				function = "qup2_se4";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
···
 				pins = "gpio80", "gpio81";
 				function = "qup2_se5";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
···
 				pins = "gpio72", "gpio106";
 				function = "qup2_se7";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_spi0_cs: qup-spi0-cs-state {