regulator: rt6752: Add support for Richtek RTQ6752

Add suport for Richtek RTQ6752.

Signed-off-by: ChiYuan Huang <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Mark Brown <[e-mail]>

drivers/regulator/Kconfig

···
 	  the Richtek RTMV20. It can support the load current up to 6A and
 	  integrate strobe/vsync/fsin signal to synchronize the IR camera.
 
+config REGULATOR_RTQ6752
+	tristate "Richtek RTQ6752 TFT LCD voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver adds support for Richtek RTQ6752. RTQ6752 includes two
+	  synchronous boost converters for PAVDD, and one synchronous NAVDD
+	  buck-boost. This device is suitable for automotive TFT-LCD panel.
+
 config REGULATOR_S2MPA01
 	tristate "Samsung S2MPA01 voltage regulator"
 	depends on MFD_SEC_CORE || COMPILE_TEST

drivers/regulator/Makefile

···
 obj-$(CONFIG_REGULATOR_RT6160)	+= rt6160-regulator.o
 obj-$(CONFIG_REGULATOR_RT6245)	+= rt6245-regulator.o
 obj-$(CONFIG_REGULATOR_RTMV20)	+= rtmv20-regulator.o
+obj-$(CONFIG_REGULATOR_RTQ6752)	+= rtq6752-regulator.o
 obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
 obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
 obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o

drivers/regulator/rtq6752-regulator.c

···
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+enum {
+	RTQ6752_IDX_PAVDD = 0,
+	RTQ6752_IDX_NAVDD = 1,
+	RTQ6752_IDX_MAX
+};
+
+#define RTQ6752_REG_PAVDD	0x00
+#define RTQ6752_REG_NAVDD	0x01
+#define RTQ6752_REG_PAVDDONDLY	0x07
+#define RTQ6752_REG_PAVDDSSTIME	0x07
+#define RTQ6752_REG_NAVDDONDLY	0x0D
+#define RTQ6752_REG_NAVDDSSTIME	0x0E
+#define RTQ6752_REG_OPTION1	0x12
+#define RTQ6752_REG_CHSWITCH	0x16
+#define RTQ6752_REG_FAULT	0x1D
+
+#define RTQ6752_VOUT_MASK	GENMASK(5, 0)
+#define RTQ6752_NAVDDEN_MASK	BIT(3)
+#define RTQ6752_PAVDDEN_MASK	BIT(0)
+#define RTQ6752_PAVDDAD_MASK	BIT(4)
+#define RTQ6752_NAVDDAD_MASK	BIT(3)
+#define RTQ6752_PAVDDF_MASK	BIT(3)
+#define RTQ6752_NAVDDF_MASK	BIT(0)
+#define RTQ6752_ENABLE_MASK	(BIT(RTQ6752_IDX_MAX) - 1)
+
+#define RTQ6752_VOUT_MINUV	5000000
+#define RTQ6752_VOUT_STEPUV	50000
+#define RTQ6752_VOUT_NUM	47
+#define RTQ6752_I2CRDY_TIMEUS	1000
+#define RTQ6752_MINSS_TIMEUS	5000
+
+struct rtq6752_priv {
+	struct regmap *regmap;
+	struct gpio_desc *enable_gpio;
+	struct mutex lock;
+	unsigned char enable_flag;
+};
+
+static int rtq6752_set_vdd_enable(struct regulator_dev *rdev)
+{
+	struct rtq6752_priv *priv = rdev_get_drvdata(rdev);
+	int rid = rdev_get_id(rdev), ret;
+
+	mutex_lock(&priv->lock);
+	if (!priv->enable_flag && priv->enable_gpio) {
+		gpiod_set_value(priv->enable_gpio, 1);
+
+		usleep_range(RTQ6752_I2CRDY_TIMEUS,
+			     RTQ6752_I2CRDY_TIMEUS + 100);
+
+		regcache_cache_only(priv->regmap, false);
+		ret = regcache_sync(priv->regmap);
+		if (ret) {
+			mutex_unlock(&priv->lock);
+			return ret;
+		}
+	}
+
+	priv->enable_flag |= BIT(rid);
+	mutex_unlock(&priv->lock);
+
+	return regulator_enable_regmap(rdev);
+}
+
+static int rtq6752_set_vdd_disable(struct regulator_dev *rdev)
+{
+	struct rtq6752_priv *priv = rdev_get_drvdata(rdev);
+	int rid = rdev_get_id(rdev), ret;
+
+	ret = regulator_disable_regmap(rdev);
+	if (ret)
+		return ret;
+
+	mutex_lock(&priv->lock);
+	priv->enable_flag &= ~BIT(rid);
+
+	if (!priv->enable_flag && priv->enable_gpio) {
+		regcache_cache_only(priv->regmap, true);
+		regcache_mark_dirty(priv->regmap);
+
+		gpiod_set_value(priv->enable_gpio, 0);
+	}
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static int rtq6752_get_error_flags(struct regulator_dev *rdev,
+				   unsigned int *flags)
+{
+	unsigned int val, events = 0;
+	const unsigned int fault_mask[] = {
+		RTQ6752_PAVDDF_MASK, RTQ6752_NAVDDF_MASK };
+	int rid = rdev_get_id(rdev), ret;
+
+	ret = regmap_read(rdev->regmap, RTQ6752_REG_FAULT, &val);
+	if (ret)
+		return ret;
+
+	if (val & fault_mask[rid])
+		events = REGULATOR_ERROR_REGULATION_OUT;
+
+	*flags = events;
+	return 0;
+}
+
+static const struct regulator_ops rtq6752_regulator_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = rtq6752_set_vdd_enable,
+	.disable = rtq6752_set_vdd_disable,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_active_discharge = regulator_set_active_discharge_regmap,
+	.get_error_flags = rtq6752_get_error_flags,
+};
+
+static const struct regulator_desc rtq6752_regulator_descs[] = {
+	{
+		.name = "rtq6752-pavdd",
+		.of_match = of_match_ptr("pavdd"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RTQ6752_IDX_PAVDD,
+		.n_voltages = RTQ6752_VOUT_NUM,
+		.ops = &rtq6752_regulator_ops,
+		.owner = THIS_MODULE,
+		.min_uV = RTQ6752_VOUT_MINUV,
+		.uV_step = RTQ6752_VOUT_STEPUV,
+		.enable_time = RTQ6752_MINSS_TIMEUS,
+		.vsel_reg = RTQ6752_REG_PAVDD,
+		.vsel_mask = RTQ6752_VOUT_MASK,
+		.enable_reg = RTQ6752_REG_CHSWITCH,
+		.enable_mask = RTQ6752_PAVDDEN_MASK,
+		.active_discharge_reg = RTQ6752_REG_OPTION1,
+		.active_discharge_mask = RTQ6752_PAVDDAD_MASK,
+		.active_discharge_off = RTQ6752_PAVDDAD_MASK,
+	},
+	{
+		.name = "rtq6752-navdd",
+		.of_match = of_match_ptr("navdd"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RTQ6752_IDX_NAVDD,
+		.n_voltages = RTQ6752_VOUT_NUM,
+		.ops = &rtq6752_regulator_ops,
+		.owner = THIS_MODULE,
+		.min_uV = RTQ6752_VOUT_MINUV,
+		.uV_step = RTQ6752_VOUT_STEPUV,
+		.enable_time = RTQ6752_MINSS_TIMEUS,
+		.vsel_reg = RTQ6752_REG_NAVDD,
+		.vsel_mask = RTQ6752_VOUT_MASK,
+		.enable_reg = RTQ6752_REG_CHSWITCH,
+		.enable_mask = RTQ6752_NAVDDEN_MASK,
+		.active_discharge_reg = RTQ6752_REG_OPTION1,
+		.active_discharge_mask = RTQ6752_NAVDDAD_MASK,
+		.active_discharge_off = RTQ6752_NAVDDAD_MASK,
+	}
+};
+
+static int rtq6752_init_device_properties(struct rtq6752_priv *priv)
+{
+	u8 raw_vals[] = { 0, 0 };
+	int ret;
+
+	/* Configure PAVDD on and softstart delay time to the minimum */
+	ret = regmap_raw_write(priv->regmap, RTQ6752_REG_PAVDDONDLY, raw_vals,
+			       ARRAY_SIZE(raw_vals));
+	if (ret)
+		return ret;
+
+	/* Configure NAVDD on and softstart delay time to the minimum */
+	return regmap_raw_write(priv->regmap, RTQ6752_REG_NAVDDONDLY, raw_vals,
+				ARRAY_SIZE(raw_vals));
+}
+
+static bool rtq6752_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	if (reg == RTQ6752_REG_FAULT)
+		return true;
+	return false;
+}
+
+static const struct reg_default rtq6752_reg_defaults[] = {
+	{ RTQ6752_REG_PAVDD, 0x14 },
+	{ RTQ6752_REG_NAVDD, 0x14 },
+	{ RTQ6752_REG_PAVDDONDLY, 0x01 },
+	{ RTQ6752_REG_PAVDDSSTIME, 0x01 },
+	{ RTQ6752_REG_NAVDDONDLY, 0x01 },
+	{ RTQ6752_REG_NAVDDSSTIME, 0x01 },
+	{ RTQ6752_REG_OPTION1, 0x07 },
+	{ RTQ6752_REG_CHSWITCH, 0x29 },
+};
+
+static const struct regmap_config rtq6752_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = RTQ6752_REG_FAULT,
+	.reg_defaults = rtq6752_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(rtq6752_reg_defaults),
+	.volatile_reg = rtq6752_is_volatile_reg,
+};
+
+static int rtq6752_probe(struct i2c_client *i2c)
+{
+	struct rtq6752_priv *priv;
+	struct regulator_config reg_cfg = {};
+	struct regulator_dev *rdev;
+	int i, ret;
+
+	priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_init(&priv->lock);
+
+	priv->enable_gpio = devm_gpiod_get_optional(&i2c->dev, "enable",
+						    GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->enable_gpio)) {
+		dev_err(&i2c->dev, "Failed to get 'enable' gpio\n");
+		return PTR_ERR(priv->enable_gpio);
+	}
+
+	usleep_range(RTQ6752_I2CRDY_TIMEUS, RTQ6752_I2CRDY_TIMEUS + 100);
+	/* Default EN pin to high, PAVDD and NAVDD will be on */
+	priv->enable_flag = RTQ6752_ENABLE_MASK;
+
+	priv->regmap = devm_regmap_init_i2c(i2c, &rtq6752_regmap_config);
+	if (IS_ERR(priv->regmap)) {
+		dev_err(&i2c->dev, "Failed to init regmap\n");
+		return PTR_ERR(priv->regmap);
+	}
+
+	ret = rtq6752_init_device_properties(priv);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to init device properties\n");
+		return ret;
+	}
+
+	reg_cfg.dev = &i2c->dev;
+	reg_cfg.regmap = priv->regmap;
+	reg_cfg.driver_data = priv;
+
+	for (i = 0; i < ARRAY_SIZE(rtq6752_regulator_descs); i++) {
+		rdev = devm_regulator_register(&i2c->dev,
+					       rtq6752_regulator_descs + i,
+					       &reg_cfg);
+		if (IS_ERR(rdev)) {
+			dev_err(&i2c->dev, "Failed to init %d regulator\n", i);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct of_device_id __maybe_unused rtq6752_device_table[] = {
+	{ .compatible = "richtek,rtq6752", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rtq6752_device_table);
+
+static struct i2c_driver rtq6752_driver = {
+	.driver = {
+		.name = "rtq6752",
+		.of_match_table = rtq6752_device_table,
+	},
+	.probe_new = rtq6752_probe,
+};
+module_i2c_driver(rtq6752_driver);
+
+MODULE_AUTHOR("ChiYuan Hwang <[e-mail]>");
+MODULE_DESCRIPTION("Richtek RTQ6752 Regulator Driver");
+MODULE_LICENSE("GPL v2");