crypto: qat - add support for MMP FW

Load Modular Math Processor(MMP) firmware into QAT devices to support
public key algorithm acceleration.

Signed-off-by: Pingchao Yang <[e-mail]>
Signed-off-by: Tadeusz Struk <[e-mail]>
Signed-off-by: Herbert Xu <[e-mail]>

drivers/crypto/qat/qat_common/adf_accel_devices.h

···
 	struct adf_hw_device_class *dev_class;
 	uint32_t (*get_accel_mask)(uint32_t fuse);
 	uint32_t (*get_ae_mask)(uint32_t fuse);
+	uint32_t (*get_sram_bar_id)(struct adf_hw_device_data *self);
 	uint32_t (*get_misc_bar_id)(struct adf_hw_device_data *self);
 	uint32_t (*get_etr_bar_id)(struct adf_hw_device_data *self);
 	uint32_t (*get_num_aes)(struct adf_hw_device_data *self);

drivers/crypto/qat/qat_common/adf_common_drv.h

···
 void qat_uclo_del_uof_obj(struct icp_qat_fw_loader_handle *handle);
 int qat_uclo_map_uof_obj(struct icp_qat_fw_loader_handle *handle,
 			 void *addr_ptr, int mem_size);
+void qat_uclo_wr_mimage(struct icp_qat_fw_loader_handle *handle,
+			void *addr_ptr, int mem_size);
 #endif

drivers/crypto/qat/qat_common/qat_hal.c

···
 	struct icp_qat_fw_loader_handle *handle;
 	struct adf_accel_pci *pci_info = &accel_dev->accel_pci_dev;
 	struct adf_hw_device_data *hw_data = accel_dev->hw_device;
-	struct adf_bar *bar =
+	struct adf_bar *misc_bar =
 			&pci_info->pci_bars[hw_data->get_misc_bar_id(hw_data)];
+	struct adf_bar *sram_bar =
+			&pci_info->pci_bars[hw_data->get_sram_bar_id(hw_data)];
 
 	handle = kzalloc(sizeof(*handle), GFP_KERNEL);
 	if (!handle)
 		return -ENOMEM;
 
-	handle->hal_cap_g_ctl_csr_addr_v = bar->virt_addr +
+	handle->hal_cap_g_ctl_csr_addr_v = misc_bar->virt_addr +
 						ICP_DH895XCC_CAP_OFFSET;
-	handle->hal_cap_ae_xfer_csr_addr_v = bar->virt_addr +
+	handle->hal_cap_ae_xfer_csr_addr_v = misc_bar->virt_addr +
 						ICP_DH895XCC_AE_OFFSET;
-	handle->hal_ep_csr_addr_v = bar->virt_addr + ICP_DH895XCC_EP_OFFSET;
+	handle->hal_ep_csr_addr_v = misc_bar->virt_addr +
+				    ICP_DH895XCC_EP_OFFSET;
 	handle->hal_cap_ae_local_csr_addr_v =
 		handle->hal_cap_ae_xfer_csr_addr_v + LOCAL_TO_XFER_REG_OFFSET;
-
+	handle->hal_sram_addr_v = sram_bar->virt_addr;
 	handle->hal_handle = kzalloc(sizeof(*handle->hal_handle), GFP_KERNEL);
 	if (!handle->hal_handle)
 		goto out_hal_handle;

drivers/crypto/qat/qat_common/qat_uclo.c

···
 static int qat_uclo_init_ae_memory(struct icp_qat_fw_loader_handle *handle,
 				   struct icp_qat_uof_initmem *init_mem)
 {
-	unsigned int i;
-	struct icp_qat_uof_memvar_attr *mem_val_attr;
-
-	mem_val_attr =
-		(struct icp_qat_uof_memvar_attr *)((unsigned long)init_mem +
-		sizeof(struct icp_qat_uof_initmem));
-
 	switch (init_mem->region) {
-	case ICP_QAT_UOF_SRAM_REGION:
-		if ((init_mem->addr + init_mem->num_in_bytes) >
-		    ICP_DH895XCC_PESRAM_BAR_SIZE) {
-			pr_err("QAT: initmem on SRAM is out of range");
-			return -EINVAL;
-		}
-		for (i = 0; i < init_mem->val_attr_num; i++) {
-			qat_uclo_wr_sram_by_words(handle,
-						  init_mem->addr +
-						  mem_val_attr->offset_in_byte,
-						  &mem_val_attr->value, 4);
-			mem_val_attr++;
-		}
-		break;
 	case ICP_QAT_UOF_LMEM_REGION:
 		if (qat_uclo_init_lmem_seg(handle, init_mem))
 			return -EINVAL;
···
 out_err:
 	kfree(obj_handle->uword_buf);
 	return -EFAULT;
+}
+
+void qat_uclo_wr_mimage(struct icp_qat_fw_loader_handle *handle,
+			void *addr_ptr, int mem_size)
+{
+	qat_uclo_wr_sram_by_words(handle, 0, addr_ptr, ALIGN(mem_size, 4));
 }
 
 int qat_uclo_map_uof_obj(struct icp_qat_fw_loader_handle *handle,

drivers/crypto/qat/qat_dh895xcc/adf_dh895xcc_hw_data.c

···
 	return ADF_DH895XCC_ETR_BAR;
 }
 
+static uint32_t get_sram_bar_id(struct adf_hw_device_data *self)
+{
+	return ADF_DH895XCC_SRAM_BAR;
+}
+
 static enum dev_sku_info get_sku(struct adf_hw_device_data *self)
 {
 	int sku = (self->fuses & ADF_DH895XCC_FUSECTL_SKU_MASK)
···
 	hw_data->get_num_aes = get_num_aes;
 	hw_data->get_etr_bar_id = get_etr_bar_id;
 	hw_data->get_misc_bar_id = get_misc_bar_id;
+	hw_data->get_sram_bar_id = get_sram_bar_id;
 	hw_data->get_sku = get_sku;
 	hw_data->fw_name = ADF_DH895XCC_FW;
 	hw_data->init_admin_comms = adf_init_admin_comms;

drivers/crypto/qat/qat_dh895xcc/adf_dh895xcc_hw_data.h

···
 #define ADF_DH895x_HW_DATA_H_
 
 /* PCIe configuration space */
+#define ADF_DH895XCC_SRAM_BAR 0
 #define ADF_DH895XCC_PMISC_BAR 1
 #define ADF_DH895XCC_ETR_BAR 2
 #define ADF_DH895XCC_RX_RINGS_OFFSET 8