Merge tag 'i2c-host-6.17-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

i2c-host for v6.17, part 2

- apple: add support for Apple A7–A11, T2 chips
- qcom-geni: fix controller frequency mapping
- stm32f7: add DMA-safe transfer support
- tegra: use controller reset if device reset is missing
- tegra: remove unnecessary dma_sync*() calls

Documentation/devicetree/bindings/i2c/apple,i2c.yaml

···
   compatible:
     items:
       - enum:
+          - apple,s5l8960x-i2c
+          - apple,t7000-i2c
+          - apple,s8000-i2c
+          - apple,t8010-i2c
+          - apple,t8015-i2c
           - apple,t8103-i2c
           - apple,t8112-i2c
           - apple,t6000-i2c

drivers/i2c/busses/i2c-qcom-geni.c

···
 
 /* source_clock = 32 MHz */
 static const struct geni_i2c_clk_fld geni_i2c_clk_map_32mhz[] = {
-	{ I2C_MAX_STANDARD_MODE_FREQ, 8, 14, 18, 40 },
-	{ I2C_MAX_FAST_MODE_FREQ, 4,  3, 11, 20 },
-	{ I2C_MAX_FAST_MODE_PLUS_FREQ, 2, 3,  6, 15 },
+	{ I2C_MAX_STANDARD_MODE_FREQ, 8, 14, 18, 38 },
+	{ I2C_MAX_FAST_MODE_FREQ, 4,  3, 9, 19 },
+	{ I2C_MAX_FAST_MODE_PLUS_FREQ, 2, 3, 5, 15 },
 	{}
 };
 

drivers/i2c/busses/i2c-stm32f7.c

···
 {
 	struct stm32f7_i2c_dev *i2c_dev = arg;
 	struct stm32_i2c_dma *dma = i2c_dev->dma;
+	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
 
 	stm32f7_i2c_disable_dma_req(i2c_dev);
 	dmaengine_terminate_async(dma->chan_using);
 	dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
 			 dma->dma_data_dir);
+	if (!f7_msg->smbus)
+		i2c_put_dma_safe_msg_buf(f7_msg->buf, i2c_dev->msg, true);
 	complete(&dma->dma_complete);
 }
 
···
 {
 	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
 	void __iomem *base = i2c_dev->base;
+	u8 *dma_buf;
 	u32 cr1, cr2;
 	int ret;
 
···
 
 	/* Configure DMA or enable RX/TX interrupt */
 	i2c_dev->use_dma = false;
-	if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN
-	    && !i2c_dev->atomic) {
-		ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma,
-					      msg->flags & I2C_M_RD,
-					      f7_msg->count, f7_msg->buf,
-					      stm32f7_i2c_dma_callback,
-					      i2c_dev);
-		if (!ret)
-			i2c_dev->use_dma = true;
-		else
-			dev_warn(i2c_dev->dev, "can't use DMA\n");
+	if (i2c_dev->dma && !i2c_dev->atomic) {
+		dma_buf = i2c_get_dma_safe_msg_buf(msg, STM32F7_I2C_DMA_LEN_MIN);
+		if (dma_buf) {
+			f7_msg->buf = dma_buf;
+			ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma,
+						      msg->flags & I2C_M_RD,
+						      f7_msg->count, f7_msg->buf,
+						      stm32f7_i2c_dma_callback,
+						      i2c_dev);
+			if (ret) {
+				dev_warn(i2c_dev->dev, "can't use DMA\n");
+				i2c_put_dma_safe_msg_buf(f7_msg->buf, msg, false);
+				f7_msg->buf = msg->buf;
+			} else {
+				i2c_dev->use_dma = true;
+			}
+		}
 	}
 
 	if (!i2c_dev->use_dma) {

drivers/i2c/busses/i2c-tegra.c

···
 #define I2C_MST_FIFO_STATUS_TX			GENMASK(23, 16)
 #define I2C_MST_FIFO_STATUS_RX			GENMASK(7, 0)
 
+#define I2C_MASTER_RESET_CNTRL			0x0a8
+
 /* configuration load timeout in microseconds */
 #define I2C_CONFIG_LOAD_TIMEOUT			1000000
 
···
  * @has_mst_fifo: The I2C controller contains the new MST FIFO interface that
  *		provides additional features and allows for longer messages to
  *		be transferred in one go.
+ * @has_mst_reset: The I2C controller contains MASTER_RESET_CTRL register which
+ *		provides an alternative to controller reset when configured as
+ *		I2C master
  * @quirks: I2C adapter quirks for limiting write/read transfer size and not
  *		allowing 0 length transfers.
  * @supports_bus_clear: Bus Clear support to recover from bus hang during
···
 	bool has_multi_master_mode;
 	bool has_slcg_override_reg;
 	bool has_mst_fifo;
+	bool has_mst_reset;
 	const struct i2c_adapter_quirks *quirks;
 	bool supports_bus_clear;
 	bool has_apb_dma;
···
 	return 0;
 }
 
+static int tegra_i2c_master_reset(struct tegra_i2c_dev *i2c_dev)
+{
+	if (!i2c_dev->hw->has_mst_reset)
+		return -EOPNOTSUPP;
+
+	/*
+	 * Writing 1 to I2C_MASTER_RESET_CNTRL will reset all internal state of
+	 * Master logic including FIFOs. Clear this bit to 0 for normal operation.
+	 * SW needs to wait for 2us after assertion and de-assertion of this soft
+	 * reset.
+	 */
+	i2c_writel(i2c_dev, 0x1, I2C_MASTER_RESET_CNTRL);
+	fsleep(2);
+
+	i2c_writel(i2c_dev, 0x0, I2C_MASTER_RESET_CNTRL);
+	fsleep(2);
+
+	return 0;
+}
+
 static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 {
 	u32 val, clk_divisor, clk_multiplier, tsu_thd, tlow, thigh, non_hs_mode;
 	struct i2c_timings *t = &i2c_dev->timings;
 	int err;
+
+	/*
+	 * Reset the controller before initializing it.
+	 * In case if device_reset() returns -ENOENT, i.e. when the reset is
+	 * not available, the internal software reset will be used if it is
+	 * supported by the controller.
+	 */
+	err = device_reset(i2c_dev->dev);
+	if (err == -ENOENT)
+		err = tegra_i2c_master_reset(i2c_dev);
 
 	/*
 	 * The reset shouldn't ever fail in practice. The failure will be a
···
 	 * emit a noisy warning on error, which won't stay unnoticed and
 	 * won't hose machine entirely.
 	 */
-	err = device_reset(i2c_dev->dev);
 	WARN_ON_ONCE(err);
 
 	if (IS_DVC(i2c_dev))
···
 
 	if (i2c_dev->dma_mode) {
 		if (i2c_dev->msg_read) {
-			dma_sync_single_for_device(i2c_dev->dma_dev,
-						   i2c_dev->dma_phys,
-						   xfer_size, DMA_FROM_DEVICE);
-
 			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
 			if (err)
 				return err;
-		} else {
-			dma_sync_single_for_cpu(i2c_dev->dma_dev,
-						i2c_dev->dma_phys,
-						xfer_size, DMA_TO_DEVICE);
 		}
 	}
 
···
 		if (i2c_dev->dma_mode) {
 			memcpy(i2c_dev->dma_buf + I2C_PACKET_HEADER_SIZE,
 			       msg->buf, i2c_dev->msg_len);
-
-			dma_sync_single_for_device(i2c_dev->dma_dev,
-						   i2c_dev->dma_phys,
-						   xfer_size, DMA_TO_DEVICE);
-
 			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
 			if (err)
 				return err;
···
 			return -ETIMEDOUT;
 		}
 
-		if (i2c_dev->msg_read && i2c_dev->msg_err == I2C_ERR_NONE) {
-			dma_sync_single_for_cpu(i2c_dev->dma_dev,
-						i2c_dev->dma_phys,
-						xfer_size, DMA_FROM_DEVICE);
-
+		if (i2c_dev->msg_read && i2c_dev->msg_err == I2C_ERR_NONE)
 			memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf, i2c_dev->msg_len);
-		}
 	}
 
 	time_left = tegra_i2c_wait_completion(i2c_dev, &i2c_dev->msg_complete,
···
 	.has_multi_master_mode = false,
 	.has_slcg_override_reg = false,
 	.has_mst_fifo = false,
+	.has_mst_reset = false,
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = false,
 	.has_apb_dma = true,
···
 	.has_multi_master_mode = false,
 	.has_slcg_override_reg = false,
 	.has_mst_fifo = false,
+	.has_mst_reset = false,
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = false,
 	.has_apb_dma = true,
···
 	.has_multi_master_mode = false,
 	.has_slcg_override_reg = false,
 	.has_mst_fifo = false,
+	.has_mst_reset = false,
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = true,
 	.has_apb_dma = true,
···
 	.has_multi_master_mode = false,
 	.has_slcg_override_reg = true,
 	.has_mst_fifo = false,
+	.has_mst_reset = false,
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = true,
 	.has_apb_dma = true,
···
 	.has_multi_master_mode = false,
 	.has_slcg_override_reg = true,
 	.has_mst_fifo = false,
+	.has_mst_reset = false,
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = true,
 	.has_apb_dma = true,
···
 	.has_multi_master_mode = false,
 	.has_slcg_override_reg = true,
 	.has_mst_fifo = false,
+	.has_mst_reset = false,
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = true,
 	.has_apb_dma = false,
···
 	.has_multi_master_mode = true,
 	.has_slcg_override_reg = true,
 	.has_mst_fifo = true,
+	.has_mst_reset = true,
 	.quirks = &tegra194_i2c_quirks,
 	.supports_bus_clear = true,
 	.has_apb_dma = false,