hwmon: lis3: restore axis enabled bits

All axis enable bits are set to 0 at module remove.
Restore reset default value at init.

Signed-off-by: Samu Onkalo <[e-mail]>
Acked-by: Eric Piel <[e-mail]>
Signed-off-by: Guenter Roeck <[e-mail]>

drivers/hwmon/lis3lv02d_i2c.c

···
 	if (ret < 0)
 		return ret;
 
-	reg |= CTRL1_PD0;
+	reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
 	return lis3->write(lis3, CTRL_REG1, reg);
 }
 

drivers/hwmon/lis3lv02d_spi.c

···
 	if (ret < 0)
 		return ret;
 
-	reg |= CTRL1_PD0;
+	reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
 	return lis3->write(lis3, CTRL_REG1, reg);
 }