Documentation/ABI: Fix typos

Fix typos in Documentation/ABI. The changes are in descriptions or
comments where they shouldn't affect use of the ABIs.

Signed-off-by: Bjorn Helgaas <[e-mail]>
Reviewed-by: Randy Dunlap <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Jonathan Corbet <[e-mail]>

Documentation/ABI/stable/sysfs-block

···
 		capable of executing requests targeting different sector ranges
 		in parallel. For instance, single LUN multi-actuator hard-disks
 		will have an independent_access_ranges directory if the device
-		correctly advertizes the sector ranges of its actuators.
+		correctly advertises the sector ranges of its actuators.
 
 		The independent_access_ranges directory contains one directory
 		per access range, with each range described using the sector

Documentation/ABI/stable/sysfs-class-infiniband

···
 		pkeys/<n>:		(RO) Displays the contents of the physical
 					key table n = 0..126
 
-		mcgs/:			(RO) Muticast group table
+		mcgs/:			(RO) Multicast group table
 
 		<m>/gid_idx/0:		(RO) Display the GID mapping m = 1..2
 

Documentation/ABI/stable/sysfs-platform-wmi-bmof

···
 Date:		Jun 2017
 KernelVersion:	4.13
 Description:
-		Binary MOF metadata used to decribe the details of available ACPI WMI interfaces.
+		Binary MOF metadata used to describe the details of available ACPI WMI interfaces.
 
 		See Documentation/wmi/devices/wmi-bmof.rst for details.

Documentation/ABI/testing/debugfs-driver-habanalabs

···
 Date:           Oct 2022
 KernelVersion:  6.2
 Contact:        [e-mail]
-Description:    The watchdog timeout value in seconds for a device relese upon
+Description:    The watchdog timeout value in seconds for a device release upon
                 certain error cases, after which the device is reset.
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/dma_size

Documentation/ABI/testing/procfs-diskstats

···
 
 		==  ===================================
 		 1  major number
-		 2  minor mumber
+		 2  minor number
 		 3  device name
 		 4  reads completed successfully
 		 5  reads merged

Documentation/ABI/testing/sysfs-bus-coreboot

···
 Date:		August 2022
 Contact:	Jack Rosenthal <[e-mail]>
 Description:
-		This is the pyhsical memory address that the CBMEM entry's data
+		This is the physical memory address that the CBMEM entry's data
 		begins at, in hexadecimal (e.g., ``0x76ffe000``).
 
 What:		/sys/bus/coreboot/devices/cbmem-<id>/size

Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x

···
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <[e-mail]>
 Description:	(RW) Used in conjunction with @addr_idx.  Specifies the range of
-		addresses to trigger on.  Inclusion or exclusion is specificed
+		addresses to trigger on.  Inclusion or exclusion is specified
 		in the corresponding access type register.
 
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/addr_single
···
 Date:		September 2015
 KernelVersion:	4.4
 Contact:	Mathieu Poirier <[e-mail]>
-Description: 	(RO) Print the content of the ETM Trace Start/Stop Conrol
+Description: 	(RO) Print the content of the ETM Trace Start/Stop Control
 		register (0x018). The value is read directly from the HW.
 
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtecr1
 Date:		September 2015
 KernelVersion:	4.4
 Contact:	Mathieu Poirier <[e-mail]>
-Description: 	(RO) Print the content of the ETM Enable Conrol #1
+Description: 	(RO) Print the content of the ETM Enable Control #1
 		register (0x024). The value is read directly from the HW.
 
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtecr2
 Date:		September 2015
 KernelVersion:	4.4
 Contact:	Mathieu Poirier <[e-mail]>
-Description: 	(RO) Print the content of the ETM Enable Conrol #2
+Description: 	(RO) Print the content of the ETM Enable Control #2
 		register (0x01c). The value is read directly from the HW.

Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x

···
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <[e-mail]>
 Description:	(Read) Returns the maximum size of the data value, data address,
-		VMID, context ID and instuction address in the trace unit
+		VMID, context ID and instruction address in the trace unit
 		(0x1E8).  The value is taken directly from the HW.
 
 What:		/sys/bus/coresight/devices/etm<N>/trcidr/trcidr3

Documentation/ABI/testing/sysfs-bus-event_source-devices-events

···
 		If a <term> is specified alone (without an assigned value), it
 		is implied that 0x1 is assigned to that <term>.
 
-		Examples (each of these lines would be in a seperate file):
+		Examples (each of these lines would be in a separate file):
 
 			event=0x2abc
 			event=0x423,inv,cmask=0x3
···
 
 		A string representing a floating point value expressed in
 		scientific notation to be multiplied by the event count
-		recieved from the kernel to match the unit specified in the
+		received from the kernel to match the unit specified in the
 		<event>.unit file.
 
 		Example:

Documentation/ABI/testing/sysfs-bus-fsi-devices-sbefifo

···
 		Indicates whether or not this SBE device has experienced a
 		timeout; i.e. the SBE did not respond within the time allotted
 		by the driver. A value of 1 indicates that a timeout has
-		ocurred and no transfers have completed since the timeout. A
-		value of 0 indicates that no timeout has ocurred, or if one
+		occurred and no transfers have completed since the timeout. A
+		value of 0 indicates that no timeout has occurred, or if one
 		has, more recent transfers have completed successful.

Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480

···
 		NONE     no device
 		USB      USB device is attached
 		UART     UART is attached
-		CHARGER  Charger is attaced
+		CHARGER  Charger is attached
 		JIG      JIG is attached
 		=======  ======================
 

Documentation/ABI/testing/sysfs-bus-nfit

···
 Contact:	[e-mail]
 Description:
 		(RO) ACPI specification 6.2 section 5.2.25.9, defines an
-		identifier for an NVDIMM, which refelects the id attribute.
+		identifier for an NVDIMM, which reflects the id attribute.
 
 
 What:		/sys/bus/nd/devices/nmemX/nfit/subsystem_vendor

Documentation/ABI/testing/sysfs-bus-papr-pmem

···
 				  Indicating that contents of the
 				  NVDIMM have been scrubbed.
 		* "locked"
-				  Indicating that NVDIMM contents cant
+				  Indicating that NVDIMM contents can't
 				  be modified until next power cycle.
 
 What:		/sys/bus/nd/devices/nmemX/papr/perf_stats

Documentation/ABI/testing/sysfs-bus-umc

···
                 Controller (UMC).
 
                 The umc bus presents each of the individual
-                capabilties as a device.
+                capabilities as a device.
 
 What:           /sys/bus/umc/devices/.../capability_id
 Date:           July 2008

Documentation/ABI/testing/sysfs-class

···
 What:		/sys/class/
-Date:		Febuary 2006
+Date:		February 2006
 Contact:	Greg Kroah-Hartman <[e-mail]>
 Description:
 		The /sys/class directory will consist of a group of

Documentation/ABI/testing/sysfs-class-cxl

···
 Date:           September 2014
 Contact:        [e-mail]
 Description:    read only
-                Decimal value of the size of the MMIO space that may be mmaped
+                Decimal value of the size of the MMIO space that may be mmapped
                 by userspace.
 Users:		https://github.com/ibm-capi/libcxl
 
···
 Date:           September 2014
 Contact:        [e-mail]
 Description:    read only
-                Decimal value of the size of the MMIO space that may be mmaped
+                Decimal value of the size of the MMIO space that may be mmapped
                 by userspace. This includes all slave contexts space also.
 Users:		https://github.com/ibm-capi/libcxl
 

Documentation/ABI/testing/sysfs-class-mtd

···
 Contact:	[e-mail]
 Description:
 		Major and minor numbers of the character device corresponding
-		to the read-only variant of thie MTD device (in
+		to the read-only variant of the MTD device (in
 		<major>:<minor> format).  In this case <minor> will be odd.
 
 What:		/sys/class/mtd/mtdX/erasesize

Documentation/ABI/testing/sysfs-class-net

···
 Contact:	[e-mail]
 Description:
 		Indicates the current physical link state of the interface.
-		Posssible values are:
+		Possible values are:
 
 		== =====================
 		0  physical link is down

Documentation/ABI/testing/sysfs-class-net-queues

···
 Description:
 		Mask of the CPU(s) currently enabled to participate into the
 		Transmit Packet Steering packet processing flow for this
-		network device transmit queue. Possible vaules depend on the
+		network device transmit queue. Possible values depend on the
 		number of available CPU(s) in the system.
 
 What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs

Documentation/ABI/testing/sysfs-class-power-wilco

···
 		Long Life:
 			Customized charge rate for last longer battery life.
 			On Wilco device this mode is pre-configured in the factory
-			through EC's private PID. Swiching to a different mode will
+			through EC's private PID. Switching to a different mode will
 			be denied by Wilco EC when Long Life mode is enabled.
 
 What:		/sys/class/power_supply/wilco-charger/charge_control_start_threshold

Documentation/ABI/testing/sysfs-class-remoteproc

···
 		collected userspace will directly read from the remote
 		processor's device memory. Extra buffer will not be used to
 		copy the dump. Also recovery process will not proceed until
-		all data is read by usersapce.
+		all data is read by userspace.
 
 What:		/sys/class/remoteproc/.../recovery
 Date:		July 2020

Documentation/ABI/testing/sysfs-class-thermal

···
 		This is given by thermal zone driver as part of registration.
 		E.g: "acpitz" indicates it's an ACPI thermal device.
 		In order to keep it consistent with hwmon sys attribute; this
-		shouldbe a short, lowercase string, not containing spaces nor
+		should be a short, lowercase string, not containing spaces nor
 		dashes.
 
 		RO, Required

Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc

···
 KernelVersion:  3.11
 Contact:        Thomas Pugliese <[e-mail]>
 Description:
-                The device notification time slot (DNTS) count and inverval in
+                The device notification time slot (DNTS) count and interval in
                 milliseconds that the WUSB host should use.  This controls how
                 often the devices will have the opportunity to send
                 notifications to the host.

Documentation/ABI/testing/sysfs-devices-online

···
 		After a successful execution of the bus type's .offline()
 		callback the device cannot be used for any purpose until either
 		it is removed (i.e. device_del() is called for it), or its bus
-		type's .online() is exeucted successfully.
+		type's .online() is executed successfully.

Documentation/ABI/testing/sysfs-driver-ge-achc

···
 		firmware via the EzPort interface. For this the kernel
 		will load "achc.bin" via the firmware API (so usually
 		from /lib/firmware). The write will block until the FW
-		has either been flashed successfully or an error occured.
+		has either been flashed successfully or an error occurred.
 
 What:		/sys/bus/spi/<dev>/reset
 Date:		Jul 2021

Documentation/ABI/testing/sysfs-driver-tegra-fuse

···
 Contact:	Peter De Schrijver <[e-mail]>
 Description:	read-only access to the efuses on Tegra20, Tegra30, Tegra114
 		and Tegra124 SoC's from NVIDIA. The efuses contain write once
-		data programmed at the factory. The data is layed out in 32bit
+		data programmed at the factory. The data is laid out in 32bit
 		words in LSB first format. Each bit represents a single value
 		as decoded from the fuse registers. Bits order/assignment
 		exactly matches the HW registers, including any unused bits.

Documentation/ABI/testing/sysfs-firmware-acpi

···
 			 hotplug events associated with the given class of
 			 devices and will allow those devices to be ejected with
 			 the help of the _EJ0 control method.  Unsetting it
-			 effectively disables hotplug for the correspoinding
+			 effectively disables hotplug for the corresponding
 			 class of devices.
 		======== =======================================================
 

Documentation/ABI/testing/sysfs-firmware-sgi_uv

···
 			conn_port
 
 		The conn_hub entry contains a value representing the unique
-		oridinal value of the hub on the other end of the fabric
+		ordinal value of the hub on the other end of the fabric
 		cable plugged into the port. If the port is disconnected,
 		the value returned will be -1.
 
 		The conn_port entry contains a value representing the unique
-		oridinal value of the port on the other end of the fabric cable
+		ordinal value of the port on the other end of the fabric cable
 		plugged into the port. If the port is disconnected, the value
 		returned will be -1.
 

Documentation/ABI/testing/sysfs-fs-f2fs

···
 		0x00  DISABLE         disable IPU(=default option in LFS mode)
 		0x01  FORCE           all the time
 		0x02  SSR             if SSR mode is activated
-		0x04  UTIL            if FS utilization is over threashold
+		0x04  UTIL            if FS utilization is over threshold
 		0x08  SSR_UTIL        if SSR mode is activated and FS utilization is over
-		                      threashold
+		                      threshold
 		0x10  FSYNC           activated in fsync path only for high performance
 		                      flash storages. IPU will be triggered only if the
 		                      # of dirty pages over min_fsync_blocks.
···
 Contact:	"Konstantin Vyshetsky" <[e-mail]>
 Description:	Controls the number of discards a thread will issue at a time.
 		Higher number will allow the discard thread to finish its work
-		faster, at the cost of higher latency for incomming I/O.
+		faster, at the cost of higher latency for incoming I/O.
 
 What:		/sys/fs/f2fs/<disk>/min_discard_issue_time
 Date:		December 2021
···
 		state. 2048 trials is set by default.
 
 What:		/sys/fs/f2fs/<disk>/extension_list
-Date:		Feburary 2018
+Date:		February 2018
 Contact:	"Chao Yu" <[e-mail]>
 Description:	Used to control configure extension list:
 		- Query: cat /sys/fs/f2fs/<disk>/extension_list

Documentation/ABI/testing/sysfs-kernel-mm-damon

···
 What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/sz/min
 Date:		Mar 2022
 Contact:	SeongJae Park <[e-mail]>
-Description:	Writing to and reading from this file sets and gets the mimimum
+Description:	Writing to and reading from this file sets and gets the minimum
 		size of the scheme's target regions in bytes.
 
 What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/sz/max

Documentation/ABI/testing/sysfs-memory-page-offline

···
 		dropping it if possible. The kernel will then be placed
 		on the bad page list and never be reused.
 
-		The offlining is done in kernel specific granuality.
+		The offlining is done in kernel specific granularity.
 		Normally it's the base page size of the kernel, but
 		this might change.
 
···
 		to access this page assuming it's poisoned by the
 		hardware.
 
-		The offlining is done in kernel specific granuality.
+		The offlining is done in kernel specific granularity.
 		Normally it's the base page size of the kernel, but
 		this might change.
 

Documentation/ABI/testing/sysfs-platform-dell-laptop

···
 Contact:	Gabriele Mazzotta <[e-mail]>,
 		Pali Rohár <[e-mail]>
 Description:
-		This file allows to specifiy the on/off threshold value,
+		This file allows to specify the on/off threshold value,
 		as reported by the ambient light sensor.
 
 What:		/sys/class/leds/dell::kbd_backlight/start_triggers

Documentation/ABI/testing/sysfs-platform-dfl-fme

···
 Contact:	Wu Hao <[e-mail]>
 Description:	Read-Write. Read this file to get errors detected on FME.
 		Write this file to clear errors logged in fme_errors. Write
-		fials with -EINVAL if input parsing fails or input error code
+		fails with -EINVAL if input parsing fails or input error code
 		doesn't match.
 
 What:		/sys/bus/platform/devices/dfl-fme.0/errors/first_error

Documentation/ABI/testing/sysfs-platform-kim

···
 		The device name flows down to architecture specific board
 		initialization file from the ATAGS bootloader
 		firmware. The name exposed is read from the user-space
-		dameon and opens the device when install is requested.
+		daemon and opens the device when install is requested.
 
 What:		/sys/devices/platform/kim/baud_rate
 Date:		January 2010

Documentation/ABI/testing/sysfs-platform-sst-atom

···
 Contact:	"Sebastien Guiriec" <[e-mail]>
 Description:
 		LPE Firmware version for SST driver on all atom
-		plaforms (BYT/CHT/Merrifield/BSW).
+		platforms (BYT/CHT/Merrifield/BSW).
 		If the FW has never been loaded it will display::
 
 			"FW not yet loaded"