ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi

Create a separate pinmux for qspi chip select in stm32mp15-pinctrl.dtsi.
In the case we want to use transfer_one() API to communicate with a SPI
device, chip select signal must be driven individually.

Signed-off-by: Patrice Chotard <[e-mail]>
Signed-off-by: Alexandre Torgue <[e-mail]>

arch/arm/boot/dts/stm32mp15-pinctrl.dtsi

···
 	};
 
 	qspi_bk1_pins_a: qspi-bk1-0 {
-		pins1 {
+		pins {
 			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
 				 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
 				 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
 				 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
 			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
-			bias-pull-up;
 			drive-push-pull;
 			slew-rate = <1>;
 		};
···
 			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
 				 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
 				 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
-				 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
-				 <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+				 <STM32_PINMUX('F', 6, ANALOG)>; /* QSPI_BK1_IO3 */
 		};
 	};
 
 	qspi_bk2_pins_a: qspi-bk2-0 {
-		pins1 {
+		pins {
 			pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
 				 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
 				 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
 				 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
 			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
-			bias-pull-up;
 			drive-push-pull;
 			slew-rate = <1>;
 		};
···
 			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
 				 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
 				 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
-				 <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
-				 <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+				 <STM32_PINMUX('G', 7, ANALOG)>; /* QSPI_BK2_IO3 */
+		};
+	};
+
+	qspi_cs1_pins_a: qspi-cs1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_cs1_sleep_pins_a: qspi-cs1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+		};
+	};
+
+	qspi_cs2_pins_a: qspi-cs2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_cs2_sleep_pins_a: qspi-cs2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
 		};
 	};
 

arch/arm/boot/dts/stm32mp157c-ev1.dts

···
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a
+		     &qspi_bk2_pins_a
+		     &qspi_cs2_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a
+		     &qspi_bk2_sleep_pins_a
+		     &qspi_cs2_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;