Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68knommu fixes from Greg Ungerer:
"Nothing big, only a small collection of minor cleanups/fixes"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
arch: m68k: 68360: config: Remove unused function
m68knommu: fix irq handler types in 68360/commproc.c
m68k: remove check for CONFIG_BSEIP

arch/m68k/68360/commproc.c

···
 
 /* CPM interrupt vector functions. */
 struct	cpm_action {
-	void	(*handler)(void *);
-	void	*dev_id;
+	irq_handler_t	handler;
+	void		*dev_id;
 };
 static	struct	cpm_action cpm_vecs[CPMVEC_NR];
 static	void	cpm_interrupt(int irq, void * dev, struct pt_regs * regs);
 static	void	cpm_error_interrupt(void *);
 
 /* prototypes: */
-void cpm_install_handler(int vec, void (*handler)(), void *dev_id);
+void cpm_install_handler(int vec, irq_handler_t handler, void *dev_id);
 void m360_cpm_reset(void);
 
 
···
 /* Install a CPM interrupt handler.
 */
 void
-cpm_install_handler(int vec, void (*handler)(), void *dev_id)
+cpm_install_handler(int vec, irq_handler_t handler, void *dev_id)
 {
 
 	request_irq(vec, handler, 0, "timer", dev_id);

arch/m68k/68360/config.c

···
   pquicc->timer_tgcr  = tgcr_save;
 }
 
-int BSP_set_clock_mmss(unsigned long nowtime)
-{
-#if 0
-  short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-
-  tod->second1 = real_seconds / 10;
-  tod->second2 = real_seconds % 10;
-  tod->minute1 = real_minutes / 10;
-  tod->minute2 = real_minutes % 10;
-#endif
-  return 0;
-}
-
 void BSP_reset (void)
 {
   local_irq_disable();

arch/m68k/include/asm/commproc.h

···
 #define SICR_ENET_CLKRT	((uint)0x0000003d)
 #endif
 
-#ifdef CONFIG_BSEIP
-/* This ENET stuff is for the MPC823 with ethernet on SCC2.
- * This is unique to the BSE ip-Engine board.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0100)
-#define PA_ENET_RCLK	((ushort)0x0200)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-/* BSE uses port B and C bits for PHY control also.
-*/
-#define PB_BSE_POWERUP	((uint)0x00000004)
-#define PB_BSE_FDXDIS	((uint)0x00008000)
-#define PC_BSE_LOOPBACK	((ushort)0x0800)
-
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002c00)
-#endif
-
 /* SCC Event register as used by Ethernet.
 */
 #define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
···
 /* #define	CPMVEC_PIO_PC4		((ushort)0x01) */
 /* #define	CPMVEC_ERROR		((ushort)0x00) */
 
-extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
+extern void cpm_install_handler(int vec, irq_handler_t handler, void *dev_id);
 
 /* CPM interrupt configuration vector.
 */