tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
ARM: dts: am335x-base0033: Use IOPAD pinmux macro
Use the AM33XX pinmux IOPAD macro to define the physical address instead
of the offset from the padconf address. It makes the DTS easier to read
since matches the addresses listed in the Technical Reference Manual.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
authored by
Javier Martinez Canillas
and committed by
Tony Lindgren
e9a26770
8a3ecb21
+24
-24
+24
-24
arch/arm/boot/dts/am335x-base0033.dts
+24
-24
arch/arm/boot/dts/am335x-base0033.dts
···
46
46
&am33xx_pinmux {
47
47
nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
48
48
pinctrl-single,pins = <
49
-
0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
50
-
0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
51
-
0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
52
-
0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
53
-
0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
54
-
0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
55
-
0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
56
-
0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
57
-
0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
58
-
0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
59
-
0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
60
-
0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
61
-
0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
62
-
0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
63
-
0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
64
-
0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
65
-
0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
66
-
0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
67
-
0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
68
-
0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
69
-
0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
49
+
AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
50
+
AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
51
+
AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
52
+
AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
53
+
AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
54
+
AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
55
+
AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
56
+
AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
57
+
AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
58
+
AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
59
+
AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
60
+
AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
61
+
AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
62
+
AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
63
+
AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
64
+
AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
65
+
AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
66
+
AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
67
+
AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
68
+
AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
69
+
AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
70
70
>;
71
71
};
72
72
nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
73
73
pinctrl-single,pins = <
74
-
0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
74
+
AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
75
75
>;
76
76
};
77
77
78
78
leds_base_pins: pinmux_leds_base_pins {
79
79
pinctrl-single,pins = <
80
-
0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
81
-
0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
80
+
AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
81
+
AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
82
82
>;
83
83
};
84
84
};