drm/panel: samsung-s6e88a0-ams427ap24: Add flip option

The way of implementing a flip option follows the existing
panel-samsung-s6e8aa0.c [1][2][3].

The value to flip the screen is taken from a downstream kernel file of
a similar but older panel [4]. The mipi clock [5] for the new panel
samsung-s6e88a0-ams427ap24 matches 461 MHz and a hardware read-out of the
0xcb values corresponds to revision R01 of that older panel [6]. Although
for samsung-s6e88a0-ams427ap24 that's in non-flipped state while in this
older driver it seems to be the other way around. Further up there is a
hint [7] basically saying for revision R01 to change the first word of the
0xcb command from 0x06 to 0x0e, which is actually setting BIT(3) of that
word. This causes a horizontal flip.

[1] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L103
[2] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L207-L211
[3] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L954-L974
[4] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c
[5] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L2027-L2028
[6] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L137-L151
[7] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L66-L74

Signed-off-by: Jakob Hauser <[e-mail]>
Reviewed-by: Neil Armstrong <[e-mail]>
Reviewed-by: Linus Walleij <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Neil Armstrong <[e-mail]>
Link: https://patchwork.freedesktop.org/patch/msgid/[e-mail]

drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams427ap24.c

···
 	struct mipi_dsi_device *dsi;
 	struct regulator_bulk_data *supplies;
 	struct gpio_desc *reset_gpio;
+	bool flip_horizontal;
 };
 
 static const struct regulator_bulk_data s6e88a0_ams427ap24_supplies[] = {
···
 	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xcc, 0x4c); // pixel clock divider pol.
 	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf2, 0x03, 0x0d); // unknown
 	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf1, 0xa5, 0xa5); // level 3 key off
+
+	if (ctx->flip_horizontal)
+		mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xcb, 0x0e); // flip display
+
 	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0xa5, 0xa5); // level 1 key off
 	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfc, 0xa5, 0xa5); // level 2 key off
 
···
 	drm_panel_init(&ctx->panel, dev, &s6e88a0_ams427ap24_panel_funcs,
 		       DRM_MODE_CONNECTOR_DSI);
 	ctx->panel.prepare_prev_first = true;
+
+	ctx->flip_horizontal = device_property_read_bool(dev, "flip-horizontal");
 
 	ret = s6e88a0_ams427ap24_register_backlight(ctx);
 	if (ret < 0)