Merge tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
"Changes to existing drivers:
- Use of managed resources - omap, twl4030, ti_am335x_tscadc
- Advanced error handling - omap
- Rework clk management - omap
- Device Tree (re-)work - tc3589x, pm8921, da9055, sec
- IRC management overhaul and !BROKEN - pm8921
- Convert to regmap - ssbi, pm8921
- Use simple power-management ops - ucb1x00
- Include file clean-up - adp5520, cs5535, janz, lpc_ich,
- lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583,
rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc,
tps65912, vexpress-config, wm8350, ywm8350
- Various bug fixes across the subsystem
- NULL/invalid pointer dereference prevention
- Resource leak mitigation,
- Variable used initialised
- Staticise various containers
- Enforce return value checks

New drivers/supported devices:
- Add support for s2mps14 and s2mpa01 to sec
- Add support for da9063 (v5) to da9063
- Add support for atom-c2000 to gpio-ich
- Add support for come-{mbt10,cbt6,chl6} to kempld
- Add support for da9053 to da9052
- Add support for itco-wdt (v3) and baytrail to lpc_ich
- Add new drivers for tps65218, rtsx_usb, bcm590xx

(Re-)moved drivers:
- twl4030 ==> drivers/iio
- ti-ssp ==> /dev/null"

* tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits)
mfd: wm5110: Correct default for HEADPHONE_DETECT_1
mfd: arizona: Correct small errors in the DT binding documentation
mfd: arizona: Mark DSP clocking register as volatile
mfd: devicetree: bindings: Add pm8xxx RTC description
mfd: kempld-core: Fix potential hang-up during boot
mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01
mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail
mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail
mfd: sec-core: Fix I2C dummy device resource leak on probe failure
mfd: sec-core: Add of_compatible strings for clock MFD cells
mfd: Remove obsolete ti-ssp driver
Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks
mfd: bcm590xx: Fix type argument for module device table
mfd: lpc_ich: Add support for Intel Bay Trail SoC
mfd: lpc_ich: Add support for NM10 GPIO
mfd: lpc_ich: Change Avoton to iTCO v3
watchdog: iTCO_wdt: Add support for v3 silicon
mfd: lpc_ich: Add support for iTCO v3
mfd: lpc_ich: Remove lpc_ich_cfg struct use
mfd: lpc_ich: Only configure watchdog or GPIO when present
...

Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt

···
+* TWL4030 Monitoring Analog to Digital Converter (MADC)
+
+The MADC subsystem in the TWL4030 consists of a 10-bit ADC
+combined with a 16-input analog multiplexer.
+
+Required properties:
+  - compatible: Should contain "ti,twl4030-madc".
+  - interrupts: IRQ line for the MADC submodule.
+  - #io-channel-cells: Should be set to <1>.
+
+Optional properties:
+  - ti,system-uses-second-madc-irq: boolean, set if the second madc irq register
+				    should be used, which is intended to be used
+				    by Co-Processors (e.g. a modem).
+
+Example:
+
+&twl {
+	madc {
+		compatible = "ti,twl4030-madc";
+		interrupts = <3>;
+		#io-channel-cells = <1>;
+	};
+};

Documentation/devicetree/bindings/mfd/arizona.txt

···
 
 Required properties:
 
-  - compatible : one of the following chip-specific strings:
-	"wlf,wm5102"
-	"wlf,wm5110"
+  - compatible : One of the following chip-specific strings:
+        "wlf,wm5102"
+        "wlf,wm5110"
+        "wlf,wm8997"
   - reg : I2C slave address when connected using I2C, chip select number when
     using SPI.
 
···
   - #gpio-cells : Must be 2. The first cell is the pin number and the
     second cell is used to specify optional parameters (currently unused).
 
-  - AVDD1-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply,
-    SPKVDDL-supply, SPKVDDR-supply : power supplies for the device, as covered
+  - AVDD-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply (wm5102, wm5110),
+    CPVDD-supply, SPKVDDL-supply (wm5102, wm5110), SPKVDDR-supply (wm5102,
+    wm5110), SPKVDD-supply (wm8997) : Power supplies for the device, as covered
     in Documentation/devicetree/bindings/regulator/regulator.txt
 
 Optional properties:
···
 	compatible = "wlf,wm5102";
 	reg = <0x1a>;
 	interrupts = <347>;
+	interrupt-controller;
 	#interrupt-cells = <2>;
         interrupt-parent = <&gic>;
 
···
 	#gpio-cells = <2>;
 
 	wlf,gpio-defaults = <
-		0x00000000, /* AIF1TXLRCLK */
-		0xffffffff,
-		0xffffffff,
-		0xffffffff,
-		0xffffffff,
+		0x00000000 /* AIF1TXLRCLK */
+		0xffffffff
+		0xffffffff
+		0xffffffff
+		0xffffffff
 	>;
 };

Documentation/devicetree/bindings/mfd/bcm590xx.txt

···
+-------------------------------
+BCM590xx Power Management Units
+-------------------------------
+
+Required properties:
+- compatible: "brcm,bcm59056"
+- reg: I2C slave address
+- interrupts: interrupt for the PMU. Generic interrupt client node bindings
+  are described in interrupt-controller/interrupts.txt
+
+------------------
+Voltage Regulators
+------------------
+
+Optional child nodes:
+- regulators: container node for regulators following the generic
+  regulator binding in regulator/regulator.txt
+
+  The valid regulator node names for BCM59056 are:
+  	rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
+	mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
+	csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr
+
+Example:
+	pmu: bcm59056@8 {
+		compatible = "brcm,bcm59056";
+		reg = <0x08>;
+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+		regulators {
+			rfldo_reg: rfldo {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			...
+		};
+	};

Documentation/devicetree/bindings/mfd/da9055.txt

···
+* Dialog DA9055 Power Management Integrated Circuit (PMIC)
+
+DA9055 consists of a large and varied group of sub-devices (I2C Only):
+
+Device			 Supply Names	 Description
+------			 ------------	 -----------
+da9055-gpio		:		: GPIOs
+da9055-regulator	:		: Regulators
+da9055-onkey		:		: On key
+da9055-rtc		:		: RTC
+da9055-hwmon		:		: ADC
+da9055-watchdog		:		: Watchdog
+
+The CODEC device in DA9055 has a separate, configurable I2C address and so
+is instantiated separately from the PMIC.
+
+For details on accompanying CODEC I2C device, see the following:
+Documentation/devicetree/bindings/sound/da9055.txt
+
+======
+
+Required properties:
+- compatible : Should be "dlg,da9055-pmic"
+- reg: Specifies the I2C slave address (defaults to 0x5a but can be modified)
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the IRQs from da9055 are delivered to.
+- interrupts: IRQ line info for da9055 chip.
+- interrupt-controller: da9055 has internal IRQs (has own IRQ domain).
+- #interrupt-cells: Should be 1, is the local IRQ number for da9055.
+
+Sub-nodes:
+- regulators : Contain the regulator nodes. The DA9055 regulators are
+  bound using their names as listed below:
+
+    buck1     : regulator BUCK1
+    buck2     : regulator BUCK2
+    ldo1      : regulator LDO1
+    ldo2      : regulator LDO2
+    ldo3      : regulator LDO3
+    ldo4      : regulator LDO4
+    ldo5      : regulator LDO5
+    ldo6      : regulator LDO6
+
+  The bindings details of individual regulator device can be found in:
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Example:
+
+	pmic: da9055-pmic@5a {
+		compatible = "dlg,da9055-pmic";
+		reg = <0x5a>;
+		interrupt-parent = <&intc>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <2075000>;
+			};
+			buck2: BUCK2 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+			};
+			ldo1: LDO1 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};

Documentation/devicetree/bindings/mfd/omap-usb-host.txt

···
 - single-ulpi-bypass: Must be present if the controller contains a single
   ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1
 
+- clocks: a list of phandles and clock-specifier pairs, one for each entry in
+  clock-names.
+
+- clock-names: should include:
+  For OMAP3
+  * "usbhost_120m_fck" - 120MHz Functional clock.
+
+  For OMAP4+
+  * "refclk_60m_int" - 60MHz internal reference clock for UTMI clock mux
+  * "refclk_60m_ext_p1" - 60MHz external ref. clock for Port 1's UTMI clock mux.
+  * "refclk_60m_ext_p2" - 60MHz external ref. clock for Port 2's UTMI clock mux
+  * "utmi_p1_gfclk" - Port 1 UTMI clock mux.
+  * "utmi_p2_gfclk" - Port 2 UTMI clock mux.
+  * "usb_host_hs_utmi_p1_clk" - Port 1 UTMI clock gate.
+  * "usb_host_hs_utmi_p2_clk" - Port 2 UTMI clock gate.
+  * "usb_host_hs_utmi_p3_clk" - Port 3 UTMI clock gate.
+  * "usb_host_hs_hsic480m_p1_clk" - Port 1 480MHz HSIC clock gate.
+  * "usb_host_hs_hsic480m_p2_clk" - Port 2 480MHz HSIC clock gate.
+  * "usb_host_hs_hsic480m_p3_clk" - Port 3 480MHz HSIC clock gate.
+  * "usb_host_hs_hsic60m_p1_clk" - Port 1 60MHz HSIC clock gate.
+  * "usb_host_hs_hsic60m_p2_clk" - Port 2 60MHz HSIC clock gate.
+  * "usb_host_hs_hsic60m_p3_clk" - Port 3 60MHz HSIC clock gate.
+
 Required properties if child node exists:
 
 - #address-cells: Must be 1

Documentation/devicetree/bindings/mfd/omap-usb-tll.txt

···
 - interrupts : should contain the TLL module's interrupt
 - ti,hwmod : must contain "usb_tll_hs"
 
+Optional properties:
+
+- clocks: a list of phandles and clock-specifier pairs, one for each entry in
+  clock-names.
+
+- clock-names: should include:
+  * "usb_tll_hs_usb_ch0_clk" - USB TLL channel 0 clock
+  * "usb_tll_hs_usb_ch1_clk" - USB TLL channel 1 clock
+  * "usb_tll_hs_usb_ch2_clk" - USB TLL channel 2 clock
+
 Example:
 
 	usbhstll: usbhstll@4a062000 {

Documentation/devicetree/bindings/mfd/qcom,pm8xxx.txt

···
+Qualcomm PM8xxx PMIC multi-function devices
+
+The PM8xxx family of Power Management ICs are used to provide regulated
+voltages and other various functionality to Qualcomm SoCs.
+
+= PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8058"
+		    "qcom,pm8921"
+
+- #address-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1
+
+- #size-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 0
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: specifies the interrupt that indicates a subdevice
+		    has generated an interrupt (summary interrupt). The
+		    format of the specifier is defined by the binding document
+		    describing the node's interrupt parent.
+
+- #interrupt-cells:
+	Usage: required
+	Value type : <u32>
+	Definition: must be 2. Specifies the number of cells needed to encode
+		    an interrupt source. The 1st cell contains the interrupt
+		    number. The 2nd cell is the trigger type and level flags
+		    encoded as follows:
+
+			1 = low-to-high edge triggered
+			2 = high-to-low edge triggered
+			4 = active high level-sensitive
+			8 = active low level-sensitive
+
+- interrupt-controller:
+	Usage: required
+	Value type: <empty>
+	Definition: identifies this node as an interrupt controller
+
+= SUBCOMPONENTS
+
+The PMIC contains multiple independent functions, each described in a subnode.
+The below bindings specify the set of valid subnodes.
+
+== Real-Time Clock
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8058-rtc"
+		    "qcom,pm8921-rtc"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: single entry specifying the base address of the RTC registers
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: single entry specifying the RTC's alarm interrupt
+
+- allow-set-time:
+	Usage: optional
+	Value type: <empty>
+	Definition: indicates that the setting of RTC time is allowed by
+		    the host CPU
+
+= EXAMPLE
+
+	pmicintc: pmic@0 {
+		compatible = "qcom,pm8921";
+		interrupts = <104 8>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@11d {
+			compatible = "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts = <0x27 0>;
+		};
+	};

Documentation/devicetree/bindings/mfd/s2mps11.txt

···
 - interrupts: Interrupt specifiers for interrupt sources.
 
 Optional nodes:
-- clocks: s2mps11 provides three(AP/CP/BT) buffered 32.768 KHz outputs, so to
-  register these as clocks with common clock framework instantiate a sub-node
-  named "clocks". It uses the common clock binding documented in :
+- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz
+  outputs, so to register these as clocks with common clock framework
+  instantiate a sub-node named "clocks". It uses the common clock binding
+  documented in :
   [Documentation/devicetree/bindings/clock/clock-bindings.txt]
+  The s2mps14 provides two (AP/BT) buffered 32.768 KHz outputs.
   - #clock-cells: should be 1.
 
   - The following is the list of clocks generated by the controller. Each clock
     is assigned an identifier and client nodes use this identifier to specify
     the clock which they consume.
-    Clock               ID
-    ----------------------
-    32KhzAP		0
-    32KhzCP		1
-    32KhzBT		2
+    Clock               ID           Devices
+    ----------------------------------------------------------
+    32KhzAP		0            S2MPS11, S2MPS14, S5M8767
+    32KhzCP		1            S2MPS11, S5M8767
+    32KhzBT		2            S2MPS11, S2MPS14, S5M8767
+
+  - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk",
+		"samsung,s5m8767-clk"
 
 - regulators: The regulators of s2mps11 that have to be instantiated should be
 included in a sub-node named 'regulators'. Regulator nodes included in this
···
 		compatible = "samsung,s2mps11-pmic";
 		reg = <0x66>;
 
-		s2m_osc: clocks{
+		s2m_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
 			#clock-cells = 1;
 			clock-output-names = "xx", "yy", "zz";
 		};

arch/arm/boot/dts/omap4.dtsi

···
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			clocks = <&init_60m_fclk>,
+				 <&xclk60mhsp1_ck>,
+				 <&xclk60mhsp2_ck>;
+			clock-names = "refclk_60m_int",
+				      "refclk_60m_ext_p1",
+				      "refclk_60m_ext_p2";
 
 			usbhsohci: ohci@4a064800 {
 				compatible = "ti,ohci-omap3";

arch/arm/boot/dts/omap5.dtsi

···
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			clocks = <&l3init_60m_fclk>,
+				 <&xclk60mhsp1_ck>,
+				 <&xclk60mhsp2_ck>;
+			clock-names = "refclk_60m_int",
+				      "refclk_60m_ext_p1",
+				      "refclk_60m_ext_p2";
 
 			usbhsohci: ohci@4a064800 {
 				compatible = "ti,ohci-omap3";

arch/arm/mach-omap2/cclock3xxx_data.c

···
 	CLK(NULL,	"dss_tv_fck",	&dss_tv_fck),
 	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck),
 	CLK(NULL,	"dss2_alwon_fck",	&dss2_alwon_fck),
-	CLK(NULL,	"utmi_p1_gfclk",	&dummy_ck),
-	CLK(NULL,	"utmi_p2_gfclk",	&dummy_ck),
-	CLK(NULL,	"xclk60mhsp1_ck",	&dummy_ck),
-	CLK(NULL,	"xclk60mhsp2_ck",	&dummy_ck),
 	CLK(NULL,	"init_60m_fclk",	&dummy_ck),
 	CLK(NULL,	"gpt1_fck",	&gpt1_fck),
 	CLK(NULL,	"aes2_ick",	&aes2_ick),

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

···
 	.sysc = &omap3xxx_usb_host_hs_sysc,
 };
 
-static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
-	  { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", },
-};
-
 static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
 	{ .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, },
 	{ .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, },
···
 			.idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT,
 		},
 	},
-	.opt_clks	= omap3xxx_usb_host_hs_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks),
 
 	/*
 	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock

drivers/clk/ti/clk-3xxx.c

···
 	DT_CLK(NULL, "dss_tv_fck", "dss_tv_fck"),
 	DT_CLK(NULL, "dss_96m_fck", "dss_96m_fck"),
 	DT_CLK(NULL, "dss2_alwon_fck", "dss2_alwon_fck"),
-	DT_CLK(NULL, "utmi_p1_gfclk", "dummy_ck"),
-	DT_CLK(NULL, "utmi_p2_gfclk", "dummy_ck"),
-	DT_CLK(NULL, "xclk60mhsp1_ck", "dummy_ck"),
-	DT_CLK(NULL, "xclk60mhsp2_ck", "dummy_ck"),
 	DT_CLK(NULL, "init_60m_fclk", "dummy_ck"),
 	DT_CLK(NULL, "gpt1_fck", "gpt1_fck"),
 	DT_CLK(NULL, "aes2_ick", "aes2_ick"),

drivers/gpio/gpio-ich.c

···
 /*
- * Intel ICH6-10, Series 5 and 6 GPIO driver
+ * Intel ICH6-10, Series 5 and 6, Atom C2000 (Avoton/Rangeley) GPIO driver
  *
  * Copyright (C) 2010 Extreme Engineering Solutions.
  *
···
 
 static const u8 ichx_reglen[3] = {
 	0x30, 0x10, 0x10,
+};
+
+static const u8 avoton_regs[4][3] = {
+	{0x00, 0x80, 0x00},
+	{0x04, 0x84, 0x00},
+	{0x08, 0x88, 0x00},
+};
+
+static const u8 avoton_reglen[3] = {
+	0x10, 0x10, 0x00,
 };
 
 #define ICHX_WRITE(val, reg, base_res)	outl(val, (reg) + (base_res)->start)
···
 	.reglen = ichx_reglen,
 };
 
+/* Avoton */
+static struct ichx_desc avoton_desc = {
+	/* Avoton has only 59 GPIOs, but we assume the first set of register
+	 * (Core) has 32 instead of 31 to keep gpio-ich compliance
+	 */
+	.ngpio = 60,
+	.regs = avoton_regs,
+	.reglen = avoton_reglen,
+	.use_outlvl_cache = true,
+};
+
 static int ichx_gpio_request_regions(struct resource *res_base,
 						const char *name, u8 use_gpio)
 {
···
 		break;
 	case ICH_V10CONS_GPIO:
 		ichx_priv.desc = &ich10_cons_desc;
+		break;
+	case AVOTON_GPIO:
+		ichx_priv.desc = &avoton_desc;
 		break;
 	default:
 		return -ENODEV;

drivers/iio/adc/Kconfig

···
 	  Say yes here to build support for Texas Instruments ADC
 	  driver which is also a MFD client.
 
+config TWL4030_MADC
+	tristate "TWL4030 MADC (Monitoring A/D Converter)"
+	depends on TWL4030_CORE
+	help
+	This driver provides support for Triton TWL4030-MADC. The
+	driver supports both RT and SW conversion methods.
+
+	This driver can also be built as a module. If so, the module will be
+	called twl4030-madc.
+
 config TWL6030_GPADC
 	tristate "TWL6030 GPADC (General Purpose A/D Converter) Support"
 	depends on TWL4030_CORE

drivers/iio/adc/Makefile

···
 obj-$(CONFIG_NAU7802) += nau7802.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
+obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
 obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o
 obj-$(CONFIG_VF610_ADC) += vf610_adc.o
 obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o

drivers/mfd/88pm800.c

···
 	ret = pm800_pages_init(chip);
 	if (ret) {
 		dev_err(&client->dev, "pm800_pages_init failed!\n");
-		goto err_page_init;
+		goto err_device_init;
 	}
 
 	ret = device_800_init(chip, pdata);
···
 
 err_device_init:
 	pm800_pages_exit(chip);
-err_page_init:
 err_subchip_alloc:
 	pm80x_deinit();
 out_init:

drivers/mfd/88pm860x-core.c

···
 		chip->companion_addr = pdata->companion_addr;
 		chip->companion = i2c_new_dummy(chip->client->adapter,
 						chip->companion_addr);
+		if (!chip->companion) {
+			dev_err(&client->dev,
+				"Failed to allocate I2C companion device\n");
+			return -ENODEV;
+		}
 		chip->regmap_companion = regmap_init_i2c(chip->companion,
 							&pm860x_regmap_config);
 		if (IS_ERR(chip->regmap_companion)) {
 			ret = PTR_ERR(chip->regmap_companion);
 			dev_err(&chip->companion->dev,
 				"Failed to allocate register map: %d\n", ret);
+			i2c_unregister_device(chip->companion);
 			return ret;
 		}
 		i2c_set_clientdata(chip->companion, chip);

drivers/mfd/Kconfig

···
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
 
+config MFD_BCM590XX
+	tristate "Broadcom BCM590xx PMUs"
+	select MFD_CORE
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Support for the BCM590xx PMUs from Broadcom
+
 config MFD_CROS_EC
 	tristate "ChromeOS Embedded Controller"
 	select MFD_CORE
···
 	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 	depends on I2C=y
 	help
-	  Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
+	  Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a
 	  ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 	  usually found on PXA processors-based platforms. This includes
 	  the I2C driver and the core APIs _only_, you have to select
···
 	  device may provide functions like watchdog, GPIO, UART and I2C bus.
 
 	  The following modules are supported:
+		* COMe-bHL6
 		* COMe-bIP#
 		* COMe-bPC2 (ETXexpress-PC)
 		* COMe-bSC# (ETXexpress-SC T#)
+		* COMe-cBT6
 		* COMe-cCT6
 		* COMe-cDC2 (microETXexpress-DC)
+		* COMe-cHL6
 		* COMe-cPC2 (microETXexpress-PC)
+		* COMe-mBT10
 		* COMe-mCT10
+		* COMe-mTT10 (nanoETXexpress-TT)
 		* ETX-OH
 
 	  This driver can also be built as a module. If so, the module
···
 	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
+	select REGMAP_IRQ
 	select IRQ_DOMAIN
 	help
-	  Say yes here to support for Maxim Semiconductor MAX14577.
+	  Say yes here to add support for Maxim Semiconductor MAX14577.
 	  This is a Micro-USB IC with Charger controls on chip.
 	  This driver provides common support for accessing the device;
 	  additional drivers must be enabled in order to use the functionality
···
 	select REGMAP_I2C
 	select IRQ_DOMAIN
 	help
-	  Say yes here to support for Maxim Semiconductor MAX77686.
+	  Say yes here to add support for Maxim Semiconductor MAX77686.
 	  This is a Power Management IC with RTC on chip.
 	  This driver provides common support for accessing the device;
 	  additional drivers must be enabled in order to use the functionality
···
 	select MFD_CORE
 	select REGMAP_I2C
 	help
-	  Say yes here to support for Maxim Semiconductor MAX77693.
+	  Say yes here to add support for Maxim Semiconductor MAX77693.
 	  This is a companion Power Management IC with Flash, Haptic, Charger,
 	  and MUIC(Micro USB Interface Controller) controls on chip.
 	  This driver provides common support for accessing the device;
···
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	help
-	  Say yes here to support for Maxim Semiconductor MAX8907. This is
+	  Say yes here to add support for Maxim Semiconductor MAX8907. This is
 	  a Power Management IC. This driver provides common support for
 	  accessing the device; additional drivers must be enabled in order
 	  to use the functionality of the device.
···
 	depends on I2C=y
 	select MFD_CORE
 	help
-	  Say yes here to support for Maxim Semiconductor MAX8925. This is
+	  Say yes here to add support for Maxim Semiconductor MAX8925. This is
 	  a Power Management IC. This driver provides common support for
 	  accessing the device, additional drivers must be enabled in order
 	  to use the functionality of the device.
···
 	select MFD_CORE
 	select IRQ_DOMAIN
 	help
-	  Say yes here to support for Maxim Semiconductor MAX8997/8966.
+	  Say yes here to add support for Maxim Semiconductor MAX8997/8966.
 	  This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
 	  MUIC controls on chip.
 	  This driver provides common support for accessing the device;
···
 	select MFD_CORE
 	select IRQ_DOMAIN
 	help
-	  Say yes here to support for Maxim Semiconductor MAX8998 and
+	  Say yes here to add support for Maxim Semiconductor MAX8998 and
 	  National Semiconductor LP3974. This is a Power Management IC.
 	  This driver provides common support for accessing the device,
 	  additional drivers must be enabled in order to use the functionality
···
 
 config MFD_PM8921_CORE
 	tristate "Qualcomm PM8921 PMIC chip"
-	depends on (ARCH_MSM || HEXAGON)
-	depends on BROKEN
+	depends on (ARM || HEXAGON)
+	select IRQ_DOMAIN
 	select MFD_CORE
 	select MFD_PM8XXX
+	select REGMAP
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in PM8921 PMIC chip.
···
 
 	  Say M here if you want to include support for PM8921 chip as a module.
 	  This will build a module called "pm8921-core".
-
-config MFD_PM8XXX_IRQ
-	bool "Qualcomm PM8xxx IRQ features"
-	depends on MFD_PM8XXX
-	default y if MFD_PM8XXX
-	help
-	  This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
-
-	  This is required to use certain other PM 8xxx features, such as GPIO
-	  and MPP.
 
 config MFD_RDC321X
 	tristate "RDC R-321x southbridge"
···
 	  rts5229, rtl8411, etc. Realtek card reader supports access to many
 	  types of memory cards, such as Memory Stick, Memory Stick Pro,
 	  Secure Digital and MultiMediaCard.
+
+config MFD_RTSX_USB
+	tristate "Realtek USB card reader"
+	depends on USB
+	select MFD_CORE
+	help
+	  Select this option to get support for Realtek USB 2.0 card readers
+	  including RTS5129, RTS5139, RTS5179 and RTS5170.
+	  Realtek card reader supports access to many types of memory cards,
+	  such as Memory Stick Pro, Secure Digital and MultiMediaCard.
 
 config MFD_RC5T583
 	bool "Ricoh RC5T583 Power Management system device"
···
 	  If you say yes here you get support for the Palmas
 	  series of PMIC chips from Texas Instruments.
 
-config MFD_TI_SSP
-	tristate "TI Sequencer Serial Port support"
-	depends on ARCH_DAVINCI_TNETV107X
-	select MFD_CORE
-	---help---
-	  Say Y here if you want support for the Sequencer Serial Port
-	  in a Texas Instruments TNETV107X SoC.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ti-ssp.
-
 config TPS6105X
 	tristate "TI TPS61050/61052 Boost Converters"
 	depends on I2C
···
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called tps65217.
+
+config MFD_TPS65218
+	tristate "TI TPS65218 Power Management chips"
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  If you say yes here you get support for the TPS65218 series of
+	  Power Management chips.
+	  These include voltage regulators, gpio and other features
+	  that are often used in portable devices. Only regulator
+	  component is currently supported.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tps65218.
 
 config MFD_TPS6586X
 	bool "TI TPS6586x Power Management chips"
···
 	  boards, providing power management, RTC, GPIO, keypad, a
 	  high speed USB OTG transceiver, an audio codec (on most
 	  versions) and many other features.
-
-config TWL4030_MADC
-	tristate "TI TWL4030 MADC"
-	depends on TWL4030_CORE
-	help
-	This driver provides support for triton TWL4030-MADC. The
-	driver supports both RT and SW conversion methods.
-
-	This driver can be built as a module. If so it will be
-	named twl4030-madc
 
 config TWL4030_POWER
 	bool "TI TWL4030 power resources"
···
 	  in various ST Microelectronics and ST-Ericsson embedded
 	  Nomadik series.
 
-endmenu
-endif
-
 menu "Multimedia Capabilities Port drivers"
 	depends on ARCH_SA1100
 
···
 	help
 	  Platform configuration infrastructure for the ARM Ltd.
 	  Versatile Express.
+
+endmenu
+endif

drivers/mfd/Makefile

···
 obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
 obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
+obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
 obj-$(CONFIG_MFD_CROS_EC)	+= cros_ec.o
 obj-$(CONFIG_MFD_CROS_EC_I2C)	+= cros_ec_i2c.o
 obj-$(CONFIG_MFD_CROS_EC_SPI)	+= cros_ec_spi.o
 
 rtsx_pci-objs			:= rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
 obj-$(CONFIG_MFD_RTSX_PCI)	+= rtsx_pci.o
+obj-$(CONFIG_MFD_RTSX_USB)	+= rtsx_usb.o
 
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
···
 
 obj-$(CONFIG_MFD_DAVINCI_VOICECODEC)	+= davinci_voicecodec.o
 obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
-obj-$(CONFIG_MFD_TI_SSP)	+= ti-ssp.o
 obj-$(CONFIG_MFD_TI_AM335X_TSCADC)	+= ti_am335x_tscadc.o
 
 obj-$(CONFIG_MFD_STA2X11)	+= sta2x11-mfd.o
···
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_TPS6507X)		+= tps6507x.o
 obj-$(CONFIG_MFD_TPS65217)	+= tps65217.o
+obj-$(CONFIG_MFD_TPS65218)	+= tps65218.o
 obj-$(CONFIG_MFD_TPS65910)	+= tps65910.o
 tps65912-objs                   := tps65912-core.o tps65912-irq.o
 obj-$(CONFIG_MFD_TPS65912)	+= tps65912.o
···
 obj-$(CONFIG_MENELAUS)		+= menelaus.o
 
 obj-$(CONFIG_TWL4030_CORE)	+= twl-core.o twl4030-irq.o twl6030-irq.o
-obj-$(CONFIG_TWL4030_MADC)      += twl4030-madc.o
 obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
 obj-$(CONFIG_MFD_TWL4030_AUDIO)	+= twl4030-audio.o
 obj-$(CONFIG_TWL6040_CORE)	+= twl6040.o
···
 obj-$(CONFIG_MFD_CS5535)	+= cs5535-mfd.o
 obj-$(CONFIG_MFD_OMAP_USB_HOST)	+= omap-usb-host.o omap-usb-tll.o
 obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o ssbi.o
-obj-$(CONFIG_MFD_PM8XXX_IRQ) 	+= pm8xxx-irq.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
 obj-$(CONFIG_MFD_TPS65090)	+= tps65090.o
 obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o

drivers/mfd/adp5520.c

···
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>

drivers/mfd/as3722.c

···
 	regmap_reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC_CONFIGURATION_REG),
 	regmap_reg_range(AS3722_ASIC_ID1_REG, AS3722_ASIC_ID2_REG),
 	regmap_reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG),
+	regmap_reg_range(AS3722_FUSE7_REG, AS3722_FUSE7_REG),
 };
 
 static const struct regmap_access_table as3722_readable_table = {

drivers/mfd/bcm590xx.c

···
+/*
+ * Broadcom BCM590xx PMU
+ *
+ * Copyright 2014 Linaro Limited
+ * Author: Matt Porter <[e-mail]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/mfd/bcm590xx.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+static const struct mfd_cell bcm590xx_devs[] = {
+	{
+		.name = "bcm590xx-vregs",
+	},
+};
+
+static const struct regmap_config bcm590xx_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= BCM590XX_MAX_REGISTER,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static int bcm590xx_i2c_probe(struct i2c_client *i2c,
+			      const struct i2c_device_id *id)
+{
+	struct bcm590xx *bcm590xx;
+	int ret;
+
+	bcm590xx = devm_kzalloc(&i2c->dev, sizeof(*bcm590xx), GFP_KERNEL);
+	if (!bcm590xx)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, bcm590xx);
+	bcm590xx->dev = &i2c->dev;
+	bcm590xx->i2c_client = i2c;
+
+	bcm590xx->regmap = devm_regmap_init_i2c(i2c, &bcm590xx_regmap_config);
+	if (IS_ERR(bcm590xx->regmap)) {
+		ret = PTR_ERR(bcm590xx->regmap);
+		dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = mfd_add_devices(&i2c->dev, -1, bcm590xx_devs,
+			      ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL);
+	if (ret < 0)
+		dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
+
+	return ret;
+}
+
+static const struct of_device_id bcm590xx_of_match[] = {
+	{ .compatible = "brcm,bcm59056" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bcm590xx_of_match);
+
+static const struct i2c_device_id bcm590xx_i2c_id[] = {
+	{ "bcm59056" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, bcm590xx_i2c_id);
+
+static struct i2c_driver bcm590xx_i2c_driver = {
+	.driver = {
+		   .name = "bcm590xx",
+		   .owner = THIS_MODULE,
+		   .of_match_table = of_match_ptr(bcm590xx_of_match),
+	},
+	.probe = bcm590xx_i2c_probe,
+	.id_table = bcm590xx_i2c_id,
+};
+module_i2c_driver(bcm590xx_i2c_driver);
+
+MODULE_AUTHOR("Matt Porter <[e-mail]>");
+MODULE_DESCRIPTION("BCM590xx multi-function driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bcm590xx");

drivers/mfd/cs5535-mfd.c

···
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/mfd/core.h>
 #include <linux/module.h>
 #include <linux/pci.h>

drivers/mfd/da9052-core.c

···
 	case DA9052_EVENT_B_REG:
 	case DA9052_EVENT_C_REG:
 	case DA9052_EVENT_D_REG:
+	case DA9052_CONTROL_B_REG:
+	case DA9052_CONTROL_D_REG:
+	case DA9052_SUPPLY_REG:
 	case DA9052_FAULTLOG_REG:
 	case DA9052_CHG_TIME_REG:
 	case DA9052_ADC_RES_L_REG:

drivers/mfd/da9052-i2c.c

···
 					   DA9052_PARK_REGISTER,
 					   &val);
 		break;
+	case DA9053_BC:
 	default:
 		/*
 		 * For other chips parking of I2C register
···
 	{"da9053-aa", DA9053_AA},
 	{"da9053-ba", DA9053_BA},
 	{"da9053-bb", DA9053_BB},
+	{"da9053-bc", DA9053_BC},
 	{}
 };
 
···
 static const struct of_device_id dialog_dt_ids[] = {
 	{ .compatible = "dlg,da9052", .data = &da9052_i2c_id[0] },
 	{ .compatible = "dlg,da9053-aa", .data = &da9052_i2c_id[1] },
-	{ .compatible = "dlg,da9053-ab", .data = &da9052_i2c_id[2] },
+	{ .compatible = "dlg,da9053-ba", .data = &da9052_i2c_id[2] },
 	{ .compatible = "dlg,da9053-bb", .data = &da9052_i2c_id[3] },
+	{ .compatible = "dlg,da9053-bc", .data = &da9052_i2c_id[4] },
 	{ /* sentinel */ }
 };
 #endif

drivers/mfd/da9052-spi.c

···
 	{"da9053-aa", DA9053_AA},
 	{"da9053-ba", DA9053_BA},
 	{"da9053-bb", DA9053_BB},
+	{"da9053-bc", DA9053_BC},
 	{}
 };
 

drivers/mfd/da9055-i2c.c

···
 #include <linux/device.h>
 #include <linux/i2c.h>
 #include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <linux/mfd/da9055/core.h>
 
···
 };
 MODULE_DEVICE_TABLE(i2c, da9055_i2c_id);
 
+static const struct of_device_id da9055_of_match[] = {
+	{ .compatible = "dlg,da9055-pmic", },
+	{ }
+};
+
 static struct i2c_driver da9055_i2c_driver = {
 	.probe = da9055_i2c_probe,
 	.remove = da9055_i2c_remove,
···
 	.driver = {
 		.name = "da9055-pmic",
 		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(da9055_of_match),
 	},
 };
 

drivers/mfd/da9063-core.c

···
 int da9063_device_init(struct da9063 *da9063, unsigned int irq)
 {
 	struct da9063_pdata *pdata = da9063->dev->platform_data;
-	int model, revision;
+	int model, variant_id, variant_code;
 	int ret;
 
 	if (pdata) {
···
 		return -ENODEV;
 	}
 
-	ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &revision);
+	ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &variant_id);
 	if (ret < 0) {
-		dev_err(da9063->dev, "Cannot read chip revision id.\n");
+		dev_err(da9063->dev, "Cannot read chip variant id.\n");
 		return -EIO;
 	}
-	revision >>= DA9063_CHIP_VARIANT_SHIFT;
-	if (revision != 3) {
-		dev_err(da9063->dev, "Unknown chip revision: %d\n", revision);
+
+	variant_code = variant_id >> DA9063_CHIP_VARIANT_SHIFT;
+
+	dev_info(da9063->dev,
+		 "Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n",
+		 model, variant_id);
+
+	if (variant_code != PMIC_DA9063_BB) {
+		dev_err(da9063->dev, "Unknown chip variant code: 0x%02X\n",
+				variant_code);
 		return -ENODEV;
 	}
 
 	da9063->model = model;
-	da9063->revision = revision;
-
-	dev_info(da9063->dev,
-		 "Device detected (model-ID: 0x%02X  rev-ID: 0x%02X)\n",
-		 model, revision);
+	da9063->variant_code = variant_code;
 
 	ret = da9063_irq_init(da9063);
 	if (ret) {

drivers/mfd/janz-cmodio.c

···
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>

drivers/mfd/kempld-core.c

···
 		return -ENODEV;
 	}
 
-	/* Release hardware mutex if aquired */
-	if (!(index_reg & KEMPLD_MUTEX_KEY))
+	/* Release hardware mutex if acquired */
+	if (!(index_reg & KEMPLD_MUTEX_KEY)) {
 		iowrite8(KEMPLD_MUTEX_KEY, pld->io_index);
+		/* PXT and COMe-cPC2 boards may require a second release */
+		iowrite8(KEMPLD_MUTEX_KEY, pld->io_index);
+	}
 
 	mutex_unlock(&pld->lock);
 
···
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
 	}, {
+		.ident = "CHL6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-cHL6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "CHR2",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
···
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
 	}, {
+		.ident = "CVV6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-cBT"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "FRI2",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
···
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
 			DMI_MATCH(DMI_BOARD_NAME, "ETX-OH"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
+		.ident = "MVV1",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-mBT"),
 		},
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,

drivers/mfd/lpc_ich.c

···
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/errno.h>
···
 #define ACPIBASE_GPE_END	0x2f
 #define ACPIBASE_SMI_OFF	0x30
 #define ACPIBASE_SMI_END	0x33
+#define ACPIBASE_PMC_OFF	0x08
+#define ACPIBASE_PMC_END	0x0c
 #define ACPIBASE_TCO_OFF	0x60
 #define ACPIBASE_TCO_END	0x7f
-#define ACPICTRL		0x44
+#define ACPICTRL_PMCBASE	0x44
 
 #define ACPIBASE_GCS_OFF	0x3410
 #define ACPIBASE_GCS_END	0x3414
···
 #define wdt_mem_res(i) wdt_res(ICH_RES_MEM_OFF, i)
 #define wdt_res(b, i) (&wdt_ich_res[(b) + (i)])
 
-struct lpc_ich_cfg {
-	int base;
-	int ctrl;
-	int save;
-};
-
 struct lpc_ich_priv {
 	int chipset;
-	struct lpc_ich_cfg acpi;
-	struct lpc_ich_cfg gpio;
+
+	int abase;		/* ACPI base */
+	int actrl_pbase;	/* ACPI control or PMC base */
+	int gbase;		/* GPIO base */
+	int gctrl;		/* GPIO control */
+
+	int abase_save;		/* Cached ACPI base value */
+	int actrl_pbase_save;		/* Cached ACPI control or PMC base value */
+	int gctrl_save;		/* Cached GPIO control value */
 };
 
 static struct resource wdt_ich_res[] = {
···
 	{
 		.flags = IORESOURCE_IO,
 	},
-	/* GCS */
+	/* GCS or PMC */
 	{
 		.flags = IORESOURCE_MEM,
 	},
···
 	LPC_LPT_LP,	/* Lynx Point-LP */
 	LPC_WBG,	/* Wellsburg */
 	LPC_AVN,	/* Avoton SoC */
+	LPC_BAYTRAIL,   /* Bay Trail SoC */
 	LPC_COLETO,	/* Coleto Creek */
 	LPC_WPT_LP,	/* Wildcat Point-LP */
 };
···
 	[LPC_NM10] = {
 		.name = "NM10",
 		.iTCO_version = 2,
+		.gpio_version = ICH_V7_GPIO,
 	},
 	[LPC_ICH8] = {
 		.name = "ICH8 or ICH8R",
···
 	},
 	[LPC_AVN] = {
 		.name = "Avoton SoC",
-		.iTCO_version = 1,
+		.iTCO_version = 3,
+		.gpio_version = AVOTON_GPIO,
+	},
+	[LPC_BAYTRAIL] = {
+		.name = "Bay Trail SoC",
+		.iTCO_version = 3,
 	},
 	[LPC_COLETO] = {
 		.name = "Coleto Creek",
···
 	{ PCI_VDEVICE(INTEL, 0x1f39), LPC_AVN},
 	{ PCI_VDEVICE(INTEL, 0x1f3a), LPC_AVN},
 	{ PCI_VDEVICE(INTEL, 0x1f3b), LPC_AVN},
+	{ PCI_VDEVICE(INTEL, 0x0f1c), LPC_BAYTRAIL},
 	{ PCI_VDEVICE(INTEL, 0x2390), LPC_COLETO},
 	{ PCI_VDEVICE(INTEL, 0x9cc1), LPC_WPT_LP},
 	{ PCI_VDEVICE(INTEL, 0x9cc2), LPC_WPT_LP},
···
 {
 	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
 
-	if (priv->acpi.save >= 0) {
-		pci_write_config_byte(dev, priv->acpi.ctrl, priv->acpi.save);
-		priv->acpi.save = -1;
+	if (priv->abase_save >= 0) {
+		pci_write_config_byte(dev, priv->abase, priv->abase_save);
+		priv->abase_save = -1;
 	}
 
-	if (priv->gpio.save >= 0) {
-		pci_write_config_byte(dev, priv->gpio.ctrl, priv->gpio.save);
-		priv->gpio.save = -1;
+	if (priv->actrl_pbase_save >= 0) {
+		pci_write_config_byte(dev, priv->actrl_pbase,
+			priv->actrl_pbase_save);
+		priv->actrl_pbase_save = -1;
+	}
+
+	if (priv->gctrl_save >= 0) {
+		pci_write_config_byte(dev, priv->gctrl, priv->gctrl_save);
+		priv->gctrl_save = -1;
 	}
 }
 
···
 	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
 	u8 reg_save;
 
-	pci_read_config_byte(dev, priv->acpi.ctrl, &reg_save);
-	pci_write_config_byte(dev, priv->acpi.ctrl, reg_save | 0x10);
-	priv->acpi.save = reg_save;
+	switch (lpc_chipset_info[priv->chipset].iTCO_version) {
+	case 3:
+		/*
+		 * Some chipsets (eg Avoton) enable the ACPI space in the
+		 * ACPI BASE register.
+		 */
+		pci_read_config_byte(dev, priv->abase, &reg_save);
+		pci_write_config_byte(dev, priv->abase, reg_save | 0x2);
+		priv->abase_save = reg_save;
+		break;
+	default:
+		/*
+		 * Most chipsets enable the ACPI space in the ACPI control
+		 * register.
+		 */
+		pci_read_config_byte(dev, priv->actrl_pbase, &reg_save);
+		pci_write_config_byte(dev, priv->actrl_pbase, reg_save | 0x80);
+		priv->actrl_pbase_save = reg_save;
+		break;
+	}
 }
 
 static void lpc_ich_enable_gpio_space(struct pci_dev *dev)
···
 	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
 	u8 reg_save;
 
-	pci_read_config_byte(dev, priv->gpio.ctrl, &reg_save);
-	pci_write_config_byte(dev, priv->gpio.ctrl, reg_save | 0x10);
-	priv->gpio.save = reg_save;
+	pci_read_config_byte(dev, priv->gctrl, &reg_save);
+	pci_write_config_byte(dev, priv->gctrl, reg_save | 0x10);
+	priv->gctrl_save = reg_save;
+}
+
+static void lpc_ich_enable_pmc_space(struct pci_dev *dev)
+{
+	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
+	u8 reg_save;
+
+	pci_read_config_byte(dev, priv->actrl_pbase, &reg_save);
+	pci_write_config_byte(dev, priv->actrl_pbase, reg_save | 0x2);
+
+	priv->actrl_pbase_save = reg_save;
 }
 
 static void lpc_ich_finalize_cell(struct pci_dev *dev, struct mfd_cell *cell)
···
 	struct resource *res;
 
 	/* Setup power management base register */
-	pci_read_config_dword(dev, priv->acpi.base, &base_addr_cfg);
+	pci_read_config_dword(dev, priv->abase, &base_addr_cfg);
 	base_addr = base_addr_cfg & 0x0000ff80;
 	if (!base_addr) {
 		dev_notice(&dev->dev, "I/O space for ACPI uninitialized\n");
···
 
 gpe0_done:
 	/* Setup GPIO base register */
-	pci_read_config_dword(dev, priv->gpio.base, &base_addr_cfg);
+	pci_read_config_dword(dev, priv->gbase, &base_addr_cfg);
 	base_addr = base_addr_cfg & 0x0000ff80;
 	if (!base_addr) {
 		dev_notice(&dev->dev, "I/O space for GPIO uninitialized\n");
···
 	struct resource *res;
 
 	/* Setup power management base register */
-	pci_read_config_dword(dev, priv->acpi.base, &base_addr_cfg);
+	pci_read_config_dword(dev, priv->abase, &base_addr_cfg);
 	base_addr = base_addr_cfg & 0x0000ff80;
 	if (!base_addr) {
 		dev_notice(&dev->dev, "I/O space for ACPI uninitialized\n");
···
 	lpc_ich_enable_acpi_space(dev);
 
 	/*
+	 * iTCO v2:
 	 * Get the Memory-Mapped GCS register. To get access to it
 	 * we have to read RCBA from PCI Config space 0xf0 and use
 	 * it as base. GCS = RCBA + ICH6_GCS(0x3410).
+	 *
+	 * iTCO v3:
+	 * Get the Power Management Configuration register.  To get access
+	 * to it we have to read the PMC BASE from config space and address
+	 * the register at offset 0x8.
 	 */
 	if (lpc_chipset_info[priv->chipset].iTCO_version == 1) {
 		/* Don't register iomem for TCO ver 1 */
 		lpc_ich_cells[LPC_WDT].num_resources--;
-	} else {
+	} else if (lpc_chipset_info[priv->chipset].iTCO_version == 2) {
 		pci_read_config_dword(dev, RCBABASE, &base_addr_cfg);
 		base_addr = base_addr_cfg & 0xffffc000;
 		if (!(base_addr_cfg & 1)) {
···
 			ret = -ENODEV;
 			goto wdt_done;
 		}
-		res = wdt_mem_res(ICH_RES_MEM_GCS);
+		res = wdt_mem_res(ICH_RES_MEM_GCS_PMC);
 		res->start = base_addr + ACPIBASE_GCS_OFF;
 		res->end = base_addr + ACPIBASE_GCS_END;
+	} else if (lpc_chipset_info[priv->chipset].iTCO_version == 3) {
+		lpc_ich_enable_pmc_space(dev);
+		pci_read_config_dword(dev, ACPICTRL_PMCBASE, &base_addr_cfg);
+		base_addr = base_addr_cfg & 0xfffffe00;
+
+		res = wdt_mem_res(ICH_RES_MEM_GCS_PMC);
+		res->start = base_addr + ACPIBASE_PMC_OFF;
+		res->end = base_addr + ACPIBASE_PMC_END;
 	}
 
 	lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_WDT]);
···
 		return -ENOMEM;
 
 	priv->chipset = id->driver_data;
-	priv->acpi.save = -1;
-	priv->acpi.base = ACPIBASE;
-	priv->acpi.ctrl = ACPICTRL;
 
-	priv->gpio.save = -1;
+	priv->actrl_pbase_save = -1;
+	priv->abase_save = -1;
+
+	priv->abase = ACPIBASE;
+	priv->actrl_pbase = ACPICTRL_PMCBASE;
+
+	priv->gctrl_save = -1;
 	if (priv->chipset <= LPC_ICH5) {
-		priv->gpio.base = GPIOBASE_ICH0;
-		priv->gpio.ctrl = GPIOCTRL_ICH0;
+		priv->gbase = GPIOBASE_ICH0;
+		priv->gctrl = GPIOCTRL_ICH0;
 	} else {
-		priv->gpio.base = GPIOBASE_ICH6;
-		priv->gpio.ctrl = GPIOCTRL_ICH6;
+		priv->gbase = GPIOBASE_ICH6;
+		priv->gctrl = GPIOCTRL_ICH6;
 	}
 
 	pci_set_drvdata(dev, priv);
 
-	ret = lpc_ich_init_wdt(dev);
-	if (!ret)
-		cell_added = true;
+	if (lpc_chipset_info[priv->chipset].iTCO_version) {
+		ret = lpc_ich_init_wdt(dev);
+		if (!ret)
+			cell_added = true;
+	}
 
-	ret = lpc_ich_init_gpio(dev);
-	if (!ret)
-		cell_added = true;
+	if (lpc_chipset_info[priv->chipset].gpio_version) {
+		ret = lpc_ich_init_gpio(dev);
+		if (!ret)
+			cell_added = true;
+	}
 
 	/*
 	 * We only care if at least one or none of the cells registered

drivers/mfd/lpc_sch.c

···
  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/errno.h>

drivers/mfd/max14577.c

···
  * This driver is based on max8997.c
  */
 
+#include <linux/err.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/core.h>
···
 #include <linux/mfd/max14577-private.h>
 
 static struct mfd_cell max14577_devs[] = {
-	{ .name = "max14577-muic", },
+	{
+		.name = "max14577-muic",
+		.of_compatible = "maxim,max14577-muic",
+	},
 	{
 		.name = "max14577-regulator",
 		.of_compatible = "maxim,max14577-regulator",

drivers/mfd/max77686.c

···
 		dev_info(max77686->dev, "device found\n");
 
 	max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
+	if (!max77686->rtc) {
+		dev_err(max77686->dev, "Failed to allocate I2C device for RTC\n");
+		return -ENODEV;
+	}
 	i2c_set_clientdata(max77686->rtc, max77686);
 
 	max77686_irq_init(max77686);

drivers/mfd/max77693.c

···
 		dev_info(max77693->dev, "device ID: 0x%x\n", reg_data);
 
 	max77693->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
+	if (!max77693->muic) {
+		dev_err(max77693->dev, "Failed to allocate I2C device for MUIC\n");
+		return -ENODEV;
+	}
 	i2c_set_clientdata(max77693->muic, max77693);
 
 	max77693->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
+	if (!max77693->haptic) {
+		dev_err(max77693->dev, "Failed to allocate I2C device for Haptic\n");
+		ret = -ENODEV;
+		goto err_i2c_haptic;
+	}
 	i2c_set_clientdata(max77693->haptic, max77693);
 
 	/*
···
 	max77693_irq_exit(max77693);
 err_irq:
 err_regmap_muic:
-	i2c_unregister_device(max77693->muic);
 	i2c_unregister_device(max77693->haptic);
+err_i2c_haptic:
+	i2c_unregister_device(max77693->muic);
 	return ret;
 }
 

drivers/mfd/max8925-i2c.c

···
 	mutex_init(&chip->io_lock);
 
 	chip->rtc = i2c_new_dummy(chip->i2c->adapter, RTC_I2C_ADDR);
+	if (!chip->rtc) {
+		dev_err(chip->dev, "Failed to allocate I2C device for RTC\n");
+		return -ENODEV;
+	}
 	i2c_set_clientdata(chip->rtc, chip);
 
 	chip->adc = i2c_new_dummy(chip->i2c->adapter, ADC_I2C_ADDR);
+	if (!chip->adc) {
+		dev_err(chip->dev, "Failed to allocate I2C device for ADC\n");
+		i2c_unregister_device(chip->rtc);
+		return -ENODEV;
+	}
 	i2c_set_clientdata(chip->adc, chip);
 
 	device_init_wakeup(&client->dev, 1);

drivers/mfd/max8997.c

···
 	mutex_init(&max8997->iolock);
 
 	max8997->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
+	if (!max8997->rtc) {
+		dev_err(max8997->dev, "Failed to allocate I2C device for RTC\n");
+		return -ENODEV;
+	}
 	i2c_set_clientdata(max8997->rtc, max8997);
+
 	max8997->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
+	if (!max8997->haptic) {
+		dev_err(max8997->dev, "Failed to allocate I2C device for Haptic\n");
+		ret = -ENODEV;
+		goto err_i2c_haptic;
+	}
 	i2c_set_clientdata(max8997->haptic, max8997);
+
 	max8997->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
+	if (!max8997->muic) {
+		dev_err(max8997->dev, "Failed to allocate I2C device for MUIC\n");
+		ret = -ENODEV;
+		goto err_i2c_muic;
+	}
 	i2c_set_clientdata(max8997->muic, max8997);
 
 	pm_runtime_set_active(max8997->dev);
···
 err_mfd:
 	mfd_remove_devices(max8997->dev);
 	i2c_unregister_device(max8997->muic);
+err_i2c_muic:
 	i2c_unregister_device(max8997->haptic);
+err_i2c_haptic:
 	i2c_unregister_device(max8997->rtc);
 	return ret;
 }

drivers/mfd/max8998.c

···
 	mutex_init(&max8998->iolock);
 
 	max8998->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
+	if (!max8998->rtc) {
+		dev_err(&i2c->dev, "Failed to allocate I2C device for RTC\n");
+		return -ENODEV;
+	}
 	i2c_set_clientdata(max8998->rtc, max8998);
 
 	max8998_irq_init(max8998);

drivers/mfd/mc13xxx-spi.c

···
 
 	mc13xxx->irq = spi->irq;
 
+	spi->max_speed_hz = spi->max_speed_hz ? : 26000000;
+	ret = spi_setup(spi);
+	if (ret)
+		return ret;
+
 	mc13xxx->regmap = devm_regmap_init(&spi->dev, &regmap_mc13xxx_bus,
 					   &spi->dev,
 					   &mc13xxx_regmap_spi_config);

drivers/mfd/mcp-sa11x0.c

···
  *  MCP read/write timeouts from Jordi Colomer, rehacked by rmk.
  */
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/io.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>

drivers/mfd/omap-usb-host.c

···
 		goto err_mem;
 	}
 
-	need_logic_fck = false;
+	/* Set all clocks as invalid to begin with */
+	omap->ehci_logic_fck = ERR_PTR(-ENODEV);
+	omap->init_60m_fclk = ERR_PTR(-ENODEV);
+	omap->utmi_p1_gfclk = ERR_PTR(-ENODEV);
+	omap->utmi_p2_gfclk = ERR_PTR(-ENODEV);
+	omap->xclk60mhsp1_ck = ERR_PTR(-ENODEV);
+	omap->xclk60mhsp2_ck = ERR_PTR(-ENODEV);
+
 	for (i = 0; i < omap->nports; i++) {
-		if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
-			is_ehci_hsic_mode(i))
+		omap->utmi_clk[i] = ERR_PTR(-ENODEV);
+		omap->hsic480m_clk[i] = ERR_PTR(-ENODEV);
+		omap->hsic60m_clk[i] = ERR_PTR(-ENODEV);
+	}
+
+	/* for OMAP3 i.e. USBHS REV1 */
+	if (omap->usbhs_rev == OMAP_USBHS_REV1) {
+		need_logic_fck = false;
+		for (i = 0; i < omap->nports; i++) {
+			if (is_ehci_phy_mode(pdata->port_mode[i]) ||
+			    is_ehci_tll_mode(pdata->port_mode[i]) ||
+			    is_ehci_hsic_mode(pdata->port_mode[i]))
+
 				need_logic_fck |= true;
-	}
-
-	omap->ehci_logic_fck = ERR_PTR(-EINVAL);
-	if (need_logic_fck) {
-		omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
-		if (IS_ERR(omap->ehci_logic_fck)) {
-			ret = PTR_ERR(omap->ehci_logic_fck);
-			dev_dbg(dev, "ehci_logic_fck failed:%d\n", ret);
 		}
+
+		if (need_logic_fck) {
+			omap->ehci_logic_fck = devm_clk_get(dev,
+							    "usbhost_120m_fck");
+			if (IS_ERR(omap->ehci_logic_fck)) {
+				ret = PTR_ERR(omap->ehci_logic_fck);
+				dev_err(dev, "usbhost_120m_fck failed:%d\n",
+					ret);
+				goto err_mem;
+			}
+		}
+		goto initialize;
 	}
 
-	omap->utmi_p1_gfclk = clk_get(dev, "utmi_p1_gfclk");
+	/* for OMAP4+ i.e. USBHS REV2+ */
+	omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk");
 	if (IS_ERR(omap->utmi_p1_gfclk)) {
 		ret = PTR_ERR(omap->utmi_p1_gfclk);
 		dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
-		goto err_p1_gfclk;
+		goto err_mem;
 	}
 
-	omap->utmi_p2_gfclk = clk_get(dev, "utmi_p2_gfclk");
+	omap->utmi_p2_gfclk = devm_clk_get(dev, "utmi_p2_gfclk");
 	if (IS_ERR(omap->utmi_p2_gfclk)) {
 		ret = PTR_ERR(omap->utmi_p2_gfclk);
 		dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
-		goto err_p2_gfclk;
+		goto err_mem;
 	}
 
-	omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
+	omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1");
 	if (IS_ERR(omap->xclk60mhsp1_ck)) {
 		ret = PTR_ERR(omap->xclk60mhsp1_ck);
-		dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
-		goto err_xclk60mhsp1;
+		dev_err(dev, "refclk_60m_ext_p1 failed error:%d\n", ret);
+		goto err_mem;
 	}
 
-	omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
+	omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2");
 	if (IS_ERR(omap->xclk60mhsp2_ck)) {
 		ret = PTR_ERR(omap->xclk60mhsp2_ck);
-		dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
-		goto err_xclk60mhsp2;
+		dev_err(dev, "refclk_60m_ext_p2 failed error:%d\n", ret);
+		goto err_mem;
 	}
 
-	omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
+	omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int");
 	if (IS_ERR(omap->init_60m_fclk)) {
 		ret = PTR_ERR(omap->init_60m_fclk);
-		dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
-		goto err_init60m;
+		dev_err(dev, "refclk_60m_int failed error:%d\n", ret);
+		goto err_mem;
 	}
 
 	for (i = 0; i < omap->nports; i++) {
···
 		 * platforms have all clocks and we can function without
 		 * them
 		 */
-		omap->utmi_clk[i] = clk_get(dev, clkname);
-		if (IS_ERR(omap->utmi_clk[i]))
-			dev_dbg(dev, "Failed to get clock : %s : %ld\n",
-				clkname, PTR_ERR(omap->utmi_clk[i]));
+		omap->utmi_clk[i] = devm_clk_get(dev, clkname);
+		if (IS_ERR(omap->utmi_clk[i])) {
+			ret = PTR_ERR(omap->utmi_clk[i]);
+			dev_err(dev, "Failed to get clock : %s : %d\n",
+				clkname, ret);
+			goto err_mem;
+		}
 
 		snprintf(clkname, sizeof(clkname),
 				"usb_host_hs_hsic480m_p%d_clk", i + 1);
-		omap->hsic480m_clk[i] = clk_get(dev, clkname);
-		if (IS_ERR(omap->hsic480m_clk[i]))
-			dev_dbg(dev, "Failed to get clock : %s : %ld\n",
-				clkname, PTR_ERR(omap->hsic480m_clk[i]));
+		omap->hsic480m_clk[i] = devm_clk_get(dev, clkname);
+		if (IS_ERR(omap->hsic480m_clk[i])) {
+			ret = PTR_ERR(omap->hsic480m_clk[i]);
+			dev_err(dev, "Failed to get clock : %s : %d\n",
+				clkname, ret);
+			goto err_mem;
+		}
 
 		snprintf(clkname, sizeof(clkname),
 				"usb_host_hs_hsic60m_p%d_clk", i + 1);
-		omap->hsic60m_clk[i] = clk_get(dev, clkname);
-		if (IS_ERR(omap->hsic60m_clk[i]))
-			dev_dbg(dev, "Failed to get clock : %s : %ld\n",
-				clkname, PTR_ERR(omap->hsic60m_clk[i]));
+		omap->hsic60m_clk[i] = devm_clk_get(dev, clkname);
+		if (IS_ERR(omap->hsic60m_clk[i])) {
+			ret = PTR_ERR(omap->hsic60m_clk[i]);
+			dev_err(dev, "Failed to get clock : %s : %d\n",
+				clkname, ret);
+			goto err_mem;
+		}
 	}
 
 	if (is_ehci_phy_mode(pdata->port_mode[0])) {
-		/* for OMAP3, clk_set_parent fails */
 		ret = clk_set_parent(omap->utmi_p1_gfclk,
 					omap->xclk60mhsp1_ck);
-		if (ret != 0)
-			dev_dbg(dev, "xclk60mhsp1_ck set parent failed: %d\n",
-					ret);
+		if (ret != 0) {
+			dev_err(dev, "xclk60mhsp1_ck set parent failed: %d\n",
+				ret);
+			goto err_mem;
+		}
 	} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
 		ret = clk_set_parent(omap->utmi_p1_gfclk,
 					omap->init_60m_fclk);
-		if (ret != 0)
-			dev_dbg(dev, "P0 init_60m_fclk set parent failed: %d\n",
-					ret);
+		if (ret != 0) {
+			dev_err(dev, "P0 init_60m_fclk set parent failed: %d\n",
+				ret);
+			goto err_mem;
+		}
 	}
 
 	if (is_ehci_phy_mode(pdata->port_mode[1])) {
 		ret = clk_set_parent(omap->utmi_p2_gfclk,
 					omap->xclk60mhsp2_ck);
-		if (ret != 0)
-			dev_dbg(dev, "xclk60mhsp2_ck set parent failed: %d\n",
-					ret);
+		if (ret != 0) {
+			dev_err(dev, "xclk60mhsp2_ck set parent failed: %d\n",
+				ret);
+			goto err_mem;
+		}
 	} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
 		ret = clk_set_parent(omap->utmi_p2_gfclk,
 						omap->init_60m_fclk);
-		if (ret != 0)
-			dev_dbg(dev, "P1 init_60m_fclk set parent failed: %d\n",
-					ret);
+		if (ret != 0) {
+			dev_err(dev, "P1 init_60m_fclk set parent failed: %d\n",
+				ret);
+			goto err_mem;
+		}
 	}
 
+initialize:
 	omap_usbhs_init(dev);
 
 	if (dev->of_node) {
···
 
 		if (ret) {
 			dev_err(dev, "Failed to create DT children: %d\n", ret);
-			goto err_alloc;
+			goto err_mem;
 		}
 
 	} else {
···
 		if (ret) {
 			dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
 						ret);
-			goto err_alloc;
+			goto err_mem;
 		}
 	}
 
 	return 0;
-
-err_alloc:
-	for (i = 0; i < omap->nports; i++) {
-		if (!IS_ERR(omap->utmi_clk[i]))
-			clk_put(omap->utmi_clk[i]);
-		if (!IS_ERR(omap->hsic60m_clk[i]))
-			clk_put(omap->hsic60m_clk[i]);
-		if (!IS_ERR(omap->hsic480m_clk[i]))
-			clk_put(omap->hsic480m_clk[i]);
-	}
-
-	clk_put(omap->init_60m_fclk);
-
-err_init60m:
-	clk_put(omap->xclk60mhsp2_ck);
-
-err_xclk60mhsp2:
-	clk_put(omap->xclk60mhsp1_ck);
-
-err_xclk60mhsp1:
-	clk_put(omap->utmi_p2_gfclk);
-
-err_p2_gfclk:
-	clk_put(omap->utmi_p1_gfclk);
-
-err_p1_gfclk:
-	if (!IS_ERR(omap->ehci_logic_fck))
-		clk_put(omap->ehci_logic_fck);
 
 err_mem:
 	pm_runtime_disable(dev);
···
  */
 static int usbhs_omap_remove(struct platform_device *pdev)
 {
-	struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
-	int i;
-
-	for (i = 0; i < omap->nports; i++) {
-		if (!IS_ERR(omap->utmi_clk[i]))
-			clk_put(omap->utmi_clk[i]);
-		if (!IS_ERR(omap->hsic60m_clk[i]))
-			clk_put(omap->hsic60m_clk[i]);
-		if (!IS_ERR(omap->hsic480m_clk[i]))
-			clk_put(omap->hsic480m_clk[i]);
-	}
-
-	clk_put(omap->init_60m_fclk);
-	clk_put(omap->utmi_p1_gfclk);
-	clk_put(omap->utmi_p2_gfclk);
-	clk_put(omap->xclk60mhsp2_ck);
-	clk_put(omap->xclk60mhsp1_ck);
-
-	if (!IS_ERR(omap->ehci_logic_fck))
-		clk_put(omap->ehci_logic_fck);
-
 	pm_runtime_disable(&pdev->dev);
 
 	/* remove children */

drivers/mfd/omap-usb-tll.c

···
 		break;
 	}
 
-	tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk * [tll->nch]),
+	tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk *) * tll->nch,
 						GFP_KERNEL);
 	if (!tll->ch_clk) {
 		ret = -ENOMEM;

drivers/mfd/pcf50633-adc.c

···
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/completion.h>

drivers/mfd/pm8921-core.c

···
 #define pr_fmt(fmt) "%s: " fmt, __func__
 
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/ssbi.h>
+#include <linux/regmap.h>
+#include <linux/of_platform.h>
 #include <linux/mfd/core.h>
-#include <linux/mfd/pm8xxx/pm8921.h>
 #include <linux/mfd/pm8xxx/core.h>
+
+#define	SSBI_REG_ADDR_IRQ_BASE		0x1BB
+
+#define	SSBI_REG_ADDR_IRQ_ROOT		(SSBI_REG_ADDR_IRQ_BASE + 0)
+#define	SSBI_REG_ADDR_IRQ_M_STATUS1	(SSBI_REG_ADDR_IRQ_BASE + 1)
+#define	SSBI_REG_ADDR_IRQ_M_STATUS2	(SSBI_REG_ADDR_IRQ_BASE + 2)
+#define	SSBI_REG_ADDR_IRQ_M_STATUS3	(SSBI_REG_ADDR_IRQ_BASE + 3)
+#define	SSBI_REG_ADDR_IRQ_M_STATUS4	(SSBI_REG_ADDR_IRQ_BASE + 4)
+#define	SSBI_REG_ADDR_IRQ_BLK_SEL	(SSBI_REG_ADDR_IRQ_BASE + 5)
+#define	SSBI_REG_ADDR_IRQ_IT_STATUS	(SSBI_REG_ADDR_IRQ_BASE + 6)
+#define	SSBI_REG_ADDR_IRQ_CONFIG	(SSBI_REG_ADDR_IRQ_BASE + 7)
+#define	SSBI_REG_ADDR_IRQ_RT_STATUS	(SSBI_REG_ADDR_IRQ_BASE + 8)
+
+#define	PM_IRQF_LVL_SEL			0x01	/* level select */
+#define	PM_IRQF_MASK_FE			0x02	/* mask falling edge */
+#define	PM_IRQF_MASK_RE			0x04	/* mask rising edge */
+#define	PM_IRQF_CLR			0x08	/* clear interrupt */
+#define	PM_IRQF_BITS_MASK		0x70
+#define	PM_IRQF_BITS_SHIFT		4
+#define	PM_IRQF_WRITE			0x80
+
+#define	PM_IRQF_MASK_ALL		(PM_IRQF_MASK_FE | \
+					PM_IRQF_MASK_RE)
 
 #define REG_HWREV		0x002  /* PMIC4 revision */
 #define REG_HWREV_2		0x0E8  /* PMIC4 revision 2 */
 
+#define PM8921_NR_IRQS		256
+
+struct pm_irq_chip {
+	struct device		*dev;
+	struct regmap		*regmap;
+	spinlock_t		pm_irq_lock;
+	struct irq_domain	*irqdomain;
+	unsigned int		num_irqs;
+	unsigned int		num_blocks;
+	unsigned int		num_masters;
+	u8			config[0];
+};
+
 struct pm8921 {
 	struct device			*dev;
 	struct pm_irq_chip		*irq_chip;
+};
+
+static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, unsigned int bp,
+				 unsigned int *ip)
+{
+	int	rc;
+
+	spin_lock(&chip->pm_irq_lock);
+	rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, bp);
+	if (rc) {
+		pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);
+		goto bail;
+	}
+
+	rc = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_IT_STATUS, ip);
+	if (rc)
+		pr_err("Failed Reading Status rc=%d\n", rc);
+bail:
+	spin_unlock(&chip->pm_irq_lock);
+	return rc;
+}
+
+static int
+pm8xxx_config_irq(struct pm_irq_chip *chip, unsigned int bp, unsigned int cp)
+{
+	int	rc;
+
+	spin_lock(&chip->pm_irq_lock);
+	rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, bp);
+	if (rc) {
+		pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);
+		goto bail;
+	}
+
+	cp |= PM_IRQF_WRITE;
+	rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_CONFIG, cp);
+	if (rc)
+		pr_err("Failed Configuring IRQ rc=%d\n", rc);
+bail:
+	spin_unlock(&chip->pm_irq_lock);
+	return rc;
+}
+
+static int pm8xxx_irq_block_handler(struct pm_irq_chip *chip, int block)
+{
+	int pmirq, irq, i, ret = 0;
+	unsigned int bits;
+
+	ret = pm8xxx_read_block_irq(chip, block, &bits);
+	if (ret) {
+		pr_err("Failed reading %d block ret=%d", block, ret);
+		return ret;
+	}
+	if (!bits) {
+		pr_err("block bit set in master but no irqs: %d", block);
+		return 0;
+	}
+
+	/* Check IRQ bits */
+	for (i = 0; i < 8; i++) {
+		if (bits & (1 << i)) {
+			pmirq = block * 8 + i;
+			irq = irq_find_mapping(chip->irqdomain, pmirq);
+			generic_handle_irq(irq);
+		}
+	}
+	return 0;
+}
+
+static int pm8xxx_irq_master_handler(struct pm_irq_chip *chip, int master)
+{
+	unsigned int blockbits;
+	int block_number, i, ret = 0;
+
+	ret = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_M_STATUS1 + master,
+			  &blockbits);
+	if (ret) {
+		pr_err("Failed to read master %d ret=%d\n", master, ret);
+		return ret;
+	}
+	if (!blockbits) {
+		pr_err("master bit set in root but no blocks: %d", master);
+		return 0;
+	}
+
+	for (i = 0; i < 8; i++)
+		if (blockbits & (1 << i)) {
+			block_number = master * 8 + i;	/* block # */
+			ret |= pm8xxx_irq_block_handler(chip, block_number);
+		}
+	return ret;
+}
+
+static void pm8xxx_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct pm_irq_chip *chip = irq_desc_get_handler_data(desc);
+	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+	unsigned int root;
+	int	i, ret, masters = 0;
+
+	chained_irq_enter(irq_chip, desc);
+
+	ret = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_ROOT, &root);
+	if (ret) {
+		pr_err("Can't read root status ret=%d\n", ret);
+		return;
+	}
+
+	/* on pm8xxx series masters start from bit 1 of the root */
+	masters = root >> 1;
+
+	/* Read allowed masters for blocks. */
+	for (i = 0; i < chip->num_masters; i++)
+		if (masters & (1 << i))
+			pm8xxx_irq_master_handler(chip, i);
+
+	chained_irq_exit(irq_chip, desc);
+}
+
+static void pm8xxx_irq_mask_ack(struct irq_data *d)
+{
+	struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
+	unsigned int pmirq = irqd_to_hwirq(d);
+	int	irq_bit;
+	u8	block, config;
+
+	block = pmirq / 8;
+	irq_bit = pmirq % 8;
+
+	config = chip->config[pmirq] | PM_IRQF_MASK_ALL | PM_IRQF_CLR;
+	pm8xxx_config_irq(chip, block, config);
+}
+
+static void pm8xxx_irq_unmask(struct irq_data *d)
+{
+	struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
+	unsigned int pmirq = irqd_to_hwirq(d);
+	int	irq_bit;
+	u8	block, config;
+
+	block = pmirq / 8;
+	irq_bit = pmirq % 8;
+
+	config = chip->config[pmirq];
+	pm8xxx_config_irq(chip, block, config);
+}
+
+static int pm8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
+{
+	struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
+	unsigned int pmirq = irqd_to_hwirq(d);
+	int irq_bit;
+	u8 block, config;
+
+	block = pmirq / 8;
+	irq_bit  = pmirq % 8;
+
+	chip->config[pmirq] = (irq_bit << PM_IRQF_BITS_SHIFT)
+							| PM_IRQF_MASK_ALL;
+	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
+		if (flow_type & IRQF_TRIGGER_RISING)
+			chip->config[pmirq] &= ~PM_IRQF_MASK_RE;
+		if (flow_type & IRQF_TRIGGER_FALLING)
+			chip->config[pmirq] &= ~PM_IRQF_MASK_FE;
+	} else {
+		chip->config[pmirq] |= PM_IRQF_LVL_SEL;
+
+		if (flow_type & IRQF_TRIGGER_HIGH)
+			chip->config[pmirq] &= ~PM_IRQF_MASK_RE;
+		else
+			chip->config[pmirq] &= ~PM_IRQF_MASK_FE;
+	}
+
+	config = chip->config[pmirq] | PM_IRQF_CLR;
+	return pm8xxx_config_irq(chip, block, config);
+}
+
+static struct irq_chip pm8xxx_irq_chip = {
+	.name		= "pm8xxx",
+	.irq_mask_ack	= pm8xxx_irq_mask_ack,
+	.irq_unmask	= pm8xxx_irq_unmask,
+	.irq_set_type	= pm8xxx_irq_set_type,
+	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
+};
+
+/**
+ * pm8xxx_get_irq_stat - get the status of the irq line
+ * @chip: pointer to identify a pmic irq controller
+ * @irq: the irq number
+ *
+ * The pm8xxx gpio and mpp rely on the interrupt block to read
+ * the values on their pins. This function is to facilitate reading
+ * the status of a gpio or an mpp line. The caller has to convert the
+ * gpio number to irq number.
+ *
+ * RETURNS:
+ * an int indicating the value read on that line
+ */
+static int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
+{
+	int pmirq, rc;
+	unsigned int  block, bits, bit;
+	unsigned long flags;
+	struct irq_data *irq_data = irq_get_irq_data(irq);
+
+	pmirq = irq_data->hwirq;
+
+	block = pmirq / 8;
+	bit = pmirq % 8;
+
+	spin_lock_irqsave(&chip->pm_irq_lock, flags);
+
+	rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, block);
+	if (rc) {
+		pr_err("Failed Selecting block irq=%d pmirq=%d blk=%d rc=%d\n",
+			irq, pmirq, block, rc);
+		goto bail_out;
+	}
+
+	rc = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits);
+	if (rc) {
+		pr_err("Failed Configuring irq=%d pmirq=%d blk=%d rc=%d\n",
+			irq, pmirq, block, rc);
+		goto bail_out;
+	}
+
+	rc = (bits & (1 << bit)) ? 1 : 0;
+
+bail_out:
+	spin_unlock_irqrestore(&chip->pm_irq_lock, flags);
+
+	return rc;
+}
+
+static int pm8xxx_irq_domain_map(struct irq_domain *d, unsigned int irq,
+				   irq_hw_number_t hwirq)
+{
+	struct pm_irq_chip *chip = d->host_data;
+
+	irq_set_chip_and_handler(irq, &pm8xxx_irq_chip, handle_level_irq);
+	irq_set_chip_data(irq, chip);
+#ifdef CONFIG_ARM
+	set_irq_flags(irq, IRQF_VALID);
+#else
+	irq_set_noprobe(irq);
+#endif
+	return 0;
+}
+
+static const struct irq_domain_ops pm8xxx_irq_domain_ops = {
+	.xlate = irq_domain_xlate_twocell,
+	.map = pm8xxx_irq_domain_map,
 };
 
 static int pm8921_readb(const struct device *dev, u16 addr, u8 *val)
···
 	.pmic_read_irq_stat	= pm8921_read_irq_stat,
 };
 
-static int pm8921_add_subdevices(const struct pm8921_platform_data
-					   *pdata,
-					   struct pm8921 *pmic,
-					   u32 rev)
-{
-	int ret = 0, irq_base = 0;
-	struct pm_irq_chip *irq_chip;
+static const struct regmap_config ssbi_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 8,
+	.max_register = 0x3ff,
+	.fast_io = true,
+	.reg_read = ssbi_reg_read,
+	.reg_write = ssbi_reg_write
+};
 
-	if (pdata->irq_pdata) {
-		pdata->irq_pdata->irq_cdata.nirqs = PM8921_NR_IRQS;
-		pdata->irq_pdata->irq_cdata.rev = rev;
-		irq_base = pdata->irq_pdata->irq_base;
-		irq_chip = pm8xxx_irq_init(pmic->dev, pdata->irq_pdata);
-
-		if (IS_ERR(irq_chip)) {
-			pr_err("Failed to init interrupts ret=%ld\n",
-					PTR_ERR(irq_chip));
-			return PTR_ERR(irq_chip);
-		}
-		pmic->irq_chip = irq_chip;
-	}
-	return ret;
-}
+static const struct of_device_id pm8921_id_table[] = {
+	{ .compatible = "qcom,pm8058", },
+	{ .compatible = "qcom,pm8921", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pm8921_id_table);
 
 static int pm8921_probe(struct platform_device *pdev)
 {
-	const struct pm8921_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct pm8921 *pmic;
-	int rc;
-	u8 val;
+	struct regmap *regmap;
+	int irq, rc;
+	unsigned int val;
 	u32 rev;
+	struct pm_irq_chip *chip;
+	unsigned int nirqs = PM8921_NR_IRQS;
 
-	if (!pdata) {
-		pr_err("missing platform data\n");
-		return -EINVAL;
-	}
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
 
 	pmic = devm_kzalloc(&pdev->dev, sizeof(struct pm8921), GFP_KERNEL);
 	if (!pmic) {
···
 		return -ENOMEM;
 	}
 
+	regmap = devm_regmap_init(&pdev->dev, NULL, pdev->dev.parent,
+				  &ssbi_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
 	/* Read PMIC chip revision */
-	rc = ssbi_read(pdev->dev.parent, REG_HWREV, &val, sizeof(val));
+	rc = regmap_read(regmap, REG_HWREV, &val);
 	if (rc) {
 		pr_err("Failed to read hw rev reg %d:rc=%d\n", REG_HWREV, rc);
 		return rc;
···
 	rev = val;
 
 	/* Read PMIC chip revision 2 */
-	rc = ssbi_read(pdev->dev.parent, REG_HWREV_2, &val, sizeof(val));
+	rc = regmap_read(regmap, REG_HWREV_2, &val);
 	if (rc) {
 		pr_err("Failed to read hw rev 2 reg %d:rc=%d\n",
 			REG_HWREV_2, rc);
···
 	pm8921_drvdata.pm_chip_data = pmic;
 	platform_set_drvdata(pdev, &pm8921_drvdata);
 
-	rc = pm8921_add_subdevices(pdata, pmic, rev);
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip) +
+					sizeof(chip->config[0]) * nirqs,
+					GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	pmic->irq_chip = chip;
+	chip->dev = &pdev->dev;
+	chip->regmap = regmap;
+	chip->num_irqs = nirqs;
+	chip->num_blocks = DIV_ROUND_UP(chip->num_irqs, 8);
+	chip->num_masters = DIV_ROUND_UP(chip->num_blocks, 8);
+	spin_lock_init(&chip->pm_irq_lock);
+
+	chip->irqdomain = irq_domain_add_linear(pdev->dev.of_node, nirqs,
+						&pm8xxx_irq_domain_ops,
+						chip);
+	if (!chip->irqdomain)
+		return -ENODEV;
+
+	irq_set_handler_data(irq, chip);
+	irq_set_chained_handler(irq, pm8xxx_irq_handler);
+	irq_set_irq_wake(irq, 1);
+
+	rc = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
 	if (rc) {
-		pr_err("Cannot add subdevices rc=%d\n", rc);
-		goto err;
+		irq_set_chained_handler(irq, NULL);
+		irq_set_handler_data(irq, NULL);
+		irq_domain_remove(chip->irqdomain);
 	}
 
-	/* gpio might not work if no irq device is found */
-	WARN_ON(pmic->irq_chip == NULL);
-
-	return 0;
-
-err:
-	mfd_remove_devices(pmic->dev);
 	return rc;
+}
+
+static int pm8921_remove_child(struct device *dev, void *unused)
+{
+	platform_device_unregister(to_platform_device(dev));
+	return 0;
 }
 
 static int pm8921_remove(struct platform_device *pdev)
 {
-	struct pm8xxx_drvdata *drvdata;
-	struct pm8921 *pmic = NULL;
+	int irq = platform_get_irq(pdev, 0);
+	struct pm8921 *pmic = pm8921_drvdata.pm_chip_data;
+	struct pm_irq_chip *chip = pmic->irq_chip;
 
-	drvdata = platform_get_drvdata(pdev);
-	if (drvdata)
-		pmic = drvdata->pm_chip_data;
-	if (pmic) {
-		mfd_remove_devices(pmic->dev);
-		if (pmic->irq_chip) {
-			pm8xxx_irq_exit(pmic->irq_chip);
-			pmic->irq_chip = NULL;
-		}
-	}
+	device_for_each_child(&pdev->dev, NULL, pm8921_remove_child);
+	irq_set_chained_handler(irq, NULL);
+	irq_set_handler_data(irq, NULL);
+	irq_domain_remove(chip->irqdomain);
 
 	return 0;
 }
···
 	.driver		= {
 		.name	= "pm8921-core",
 		.owner	= THIS_MODULE,
+		.of_match_table = pm8921_id_table,
 	},
 };
 

drivers/mfd/pm8xxx-irq.c

···
-/*
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#define pr_fmt(fmt)	"%s: " fmt, __func__
-
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/mfd/pm8xxx/core.h>
-#include <linux/mfd/pm8xxx/irq.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-/* PMIC8xxx IRQ */
-
-#define	SSBI_REG_ADDR_IRQ_BASE		0x1BB
-
-#define	SSBI_REG_ADDR_IRQ_ROOT		(SSBI_REG_ADDR_IRQ_BASE + 0)
-#define	SSBI_REG_ADDR_IRQ_M_STATUS1	(SSBI_REG_ADDR_IRQ_BASE + 1)
-#define	SSBI_REG_ADDR_IRQ_M_STATUS2	(SSBI_REG_ADDR_IRQ_BASE + 2)
-#define	SSBI_REG_ADDR_IRQ_M_STATUS3	(SSBI_REG_ADDR_IRQ_BASE + 3)
-#define	SSBI_REG_ADDR_IRQ_M_STATUS4	(SSBI_REG_ADDR_IRQ_BASE + 4)
-#define	SSBI_REG_ADDR_IRQ_BLK_SEL	(SSBI_REG_ADDR_IRQ_BASE + 5)
-#define	SSBI_REG_ADDR_IRQ_IT_STATUS	(SSBI_REG_ADDR_IRQ_BASE + 6)
-#define	SSBI_REG_ADDR_IRQ_CONFIG	(SSBI_REG_ADDR_IRQ_BASE + 7)
-#define	SSBI_REG_ADDR_IRQ_RT_STATUS	(SSBI_REG_ADDR_IRQ_BASE + 8)
-
-#define	PM_IRQF_LVL_SEL			0x01	/* level select */
-#define	PM_IRQF_MASK_FE			0x02	/* mask falling edge */
-#define	PM_IRQF_MASK_RE			0x04	/* mask rising edge */
-#define	PM_IRQF_CLR			0x08	/* clear interrupt */
-#define	PM_IRQF_BITS_MASK		0x70
-#define	PM_IRQF_BITS_SHIFT		4
-#define	PM_IRQF_WRITE			0x80
-
-#define	PM_IRQF_MASK_ALL		(PM_IRQF_MASK_FE | \
-					PM_IRQF_MASK_RE)
-
-struct pm_irq_chip {
-	struct device		*dev;
-	spinlock_t		pm_irq_lock;
-	unsigned int		devirq;
-	unsigned int		irq_base;
-	unsigned int		num_irqs;
-	unsigned int		num_blocks;
-	unsigned int		num_masters;
-	u8			config[0];
-};
-
-static int pm8xxx_read_root_irq(const struct pm_irq_chip *chip, u8 *rp)
-{
-	return pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_ROOT, rp);
-}
-
-static int pm8xxx_read_master_irq(const struct pm_irq_chip *chip, u8 m, u8 *bp)
-{
-	return pm8xxx_readb(chip->dev,
-			SSBI_REG_ADDR_IRQ_M_STATUS1 + m, bp);
-}
-
-static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, u8 bp, u8 *ip)
-{
-	int	rc;
-
-	spin_lock(&chip->pm_irq_lock);
-	rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, bp);
-	if (rc) {
-		pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);
-		goto bail;
-	}
-
-	rc = pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_IT_STATUS, ip);
-	if (rc)
-		pr_err("Failed Reading Status rc=%d\n", rc);
-bail:
-	spin_unlock(&chip->pm_irq_lock);
-	return rc;
-}
-
-static int pm8xxx_config_irq(struct pm_irq_chip *chip, u8 bp, u8 cp)
-{
-	int	rc;
-
-	spin_lock(&chip->pm_irq_lock);
-	rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, bp);
-	if (rc) {
-		pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);
-		goto bail;
-	}
-
-	cp |= PM_IRQF_WRITE;
-	rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_CONFIG, cp);
-	if (rc)
-		pr_err("Failed Configuring IRQ rc=%d\n", rc);
-bail:
-	spin_unlock(&chip->pm_irq_lock);
-	return rc;
-}
-
-static int pm8xxx_irq_block_handler(struct pm_irq_chip *chip, int block)
-{
-	int pmirq, irq, i, ret = 0;
-	u8 bits;
-
-	ret = pm8xxx_read_block_irq(chip, block, &bits);
-	if (ret) {
-		pr_err("Failed reading %d block ret=%d", block, ret);
-		return ret;
-	}
-	if (!bits) {
-		pr_err("block bit set in master but no irqs: %d", block);
-		return 0;
-	}
-
-	/* Check IRQ bits */
-	for (i = 0; i < 8; i++) {
-		if (bits & (1 << i)) {
-			pmirq = block * 8 + i;
-			irq = pmirq + chip->irq_base;
-			generic_handle_irq(irq);
-		}
-	}
-	return 0;
-}
-
-static int pm8xxx_irq_master_handler(struct pm_irq_chip *chip, int master)
-{
-	u8 blockbits;
-	int block_number, i, ret = 0;
-
-	ret = pm8xxx_read_master_irq(chip, master, &blockbits);
-	if (ret) {
-		pr_err("Failed to read master %d ret=%d\n", master, ret);
-		return ret;
-	}
-	if (!blockbits) {
-		pr_err("master bit set in root but no blocks: %d", master);
-		return 0;
-	}
-
-	for (i = 0; i < 8; i++)
-		if (blockbits & (1 << i)) {
-			block_number = master * 8 + i;	/* block # */
-			ret |= pm8xxx_irq_block_handler(chip, block_number);
-		}
-	return ret;
-}
-
-static void pm8xxx_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	struct pm_irq_chip *chip = irq_desc_get_handler_data(desc);
-	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
-	u8	root;
-	int	i, ret, masters = 0;
-
-	ret = pm8xxx_read_root_irq(chip, &root);
-	if (ret) {
-		pr_err("Can't read root status ret=%d\n", ret);
-		return;
-	}
-
-	/* on pm8xxx series masters start from bit 1 of the root */
-	masters = root >> 1;
-
-	/* Read allowed masters for blocks. */
-	for (i = 0; i < chip->num_masters; i++)
-		if (masters & (1 << i))
-			pm8xxx_irq_master_handler(chip, i);
-
-	irq_chip->irq_ack(&desc->irq_data);
-}
-
-static void pm8xxx_irq_mask_ack(struct irq_data *d)
-{
-	struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
-	unsigned int pmirq = d->irq - chip->irq_base;
-	int	master, irq_bit;
-	u8	block, config;
-
-	block = pmirq / 8;
-	master = block / 8;
-	irq_bit = pmirq % 8;
-
-	config = chip->config[pmirq] | PM_IRQF_MASK_ALL | PM_IRQF_CLR;
-	pm8xxx_config_irq(chip, block, config);
-}
-
-static void pm8xxx_irq_unmask(struct irq_data *d)
-{
-	struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
-	unsigned int pmirq = d->irq - chip->irq_base;
-	int	master, irq_bit;
-	u8	block, config;
-
-	block = pmirq / 8;
-	master = block / 8;
-	irq_bit = pmirq % 8;
-
-	config = chip->config[pmirq];
-	pm8xxx_config_irq(chip, block, config);
-}
-
-static int pm8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
-	struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
-	unsigned int pmirq = d->irq - chip->irq_base;
-	int master, irq_bit;
-	u8 block, config;
-
-	block = pmirq / 8;
-	master = block / 8;
-	irq_bit  = pmirq % 8;
-
-	chip->config[pmirq] = (irq_bit << PM_IRQF_BITS_SHIFT)
-							| PM_IRQF_MASK_ALL;
-	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
-		if (flow_type & IRQF_TRIGGER_RISING)
-			chip->config[pmirq] &= ~PM_IRQF_MASK_RE;
-		if (flow_type & IRQF_TRIGGER_FALLING)
-			chip->config[pmirq] &= ~PM_IRQF_MASK_FE;
-	} else {
-		chip->config[pmirq] |= PM_IRQF_LVL_SEL;
-
-		if (flow_type & IRQF_TRIGGER_HIGH)
-			chip->config[pmirq] &= ~PM_IRQF_MASK_RE;
-		else
-			chip->config[pmirq] &= ~PM_IRQF_MASK_FE;
-	}
-
-	config = chip->config[pmirq] | PM_IRQF_CLR;
-	return pm8xxx_config_irq(chip, block, config);
-}
-
-static int pm8xxx_irq_set_wake(struct irq_data *d, unsigned int on)
-{
-	return 0;
-}
-
-static struct irq_chip pm8xxx_irq_chip = {
-	.name		= "pm8xxx",
-	.irq_mask_ack	= pm8xxx_irq_mask_ack,
-	.irq_unmask	= pm8xxx_irq_unmask,
-	.irq_set_type	= pm8xxx_irq_set_type,
-	.irq_set_wake	= pm8xxx_irq_set_wake,
-	.flags		= IRQCHIP_MASK_ON_SUSPEND,
-};
-
-/**
- * pm8xxx_get_irq_stat - get the status of the irq line
- * @chip: pointer to identify a pmic irq controller
- * @irq: the irq number
- *
- * The pm8xxx gpio and mpp rely on the interrupt block to read
- * the values on their pins. This function is to facilitate reading
- * the status of a gpio or an mpp line. The caller has to convert the
- * gpio number to irq number.
- *
- * RETURNS:
- * an int indicating the value read on that line
- */
-int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
-{
-	int pmirq, rc;
-	u8  block, bits, bit;
-	unsigned long flags;
-
-	if (chip == NULL || irq < chip->irq_base ||
-			irq >= chip->irq_base + chip->num_irqs)
-		return -EINVAL;
-
-	pmirq = irq - chip->irq_base;
-
-	block = pmirq / 8;
-	bit = pmirq % 8;
-
-	spin_lock_irqsave(&chip->pm_irq_lock, flags);
-
-	rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, block);
-	if (rc) {
-		pr_err("Failed Selecting block irq=%d pmirq=%d blk=%d rc=%d\n",
-			irq, pmirq, block, rc);
-		goto bail_out;
-	}
-
-	rc = pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits);
-	if (rc) {
-		pr_err("Failed Configuring irq=%d pmirq=%d blk=%d rc=%d\n",
-			irq, pmirq, block, rc);
-		goto bail_out;
-	}
-
-	rc = (bits & (1 << bit)) ? 1 : 0;
-
-bail_out:
-	spin_unlock_irqrestore(&chip->pm_irq_lock, flags);
-
-	return rc;
-}
-EXPORT_SYMBOL_GPL(pm8xxx_get_irq_stat);
-
-struct pm_irq_chip *  pm8xxx_irq_init(struct device *dev,
-				const struct pm8xxx_irq_platform_data *pdata)
-{
-	struct pm_irq_chip  *chip;
-	int devirq, rc;
-	unsigned int pmirq;
-
-	if (!pdata) {
-		pr_err("No platform data\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	devirq = pdata->devirq;
-	if (devirq < 0) {
-		pr_err("missing devirq\n");
-		rc = devirq;
-		return ERR_PTR(-EINVAL);
-	}
-
-	chip = kzalloc(sizeof(struct pm_irq_chip)
-			+ sizeof(u8) * pdata->irq_cdata.nirqs, GFP_KERNEL);
-	if (!chip) {
-		pr_err("Cannot alloc pm_irq_chip struct\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	chip->dev = dev;
-	chip->devirq = devirq;
-	chip->irq_base = pdata->irq_base;
-	chip->num_irqs = pdata->irq_cdata.nirqs;
-	chip->num_blocks = DIV_ROUND_UP(chip->num_irqs, 8);
-	chip->num_masters = DIV_ROUND_UP(chip->num_blocks, 8);
-	spin_lock_init(&chip->pm_irq_lock);
-
-	for (pmirq = 0; pmirq < chip->num_irqs; pmirq++) {
-		irq_set_chip_and_handler(chip->irq_base + pmirq,
-				&pm8xxx_irq_chip,
-				handle_level_irq);
-		irq_set_chip_data(chip->irq_base + pmirq, chip);
-#ifdef CONFIG_ARM
-		set_irq_flags(chip->irq_base + pmirq, IRQF_VALID);
-#else
-		irq_set_noprobe(chip->irq_base + pmirq);
-#endif
-	}
-
-	irq_set_irq_type(devirq, pdata->irq_trigger_flag);
-	irq_set_handler_data(devirq, chip);
-	irq_set_chained_handler(devirq, pm8xxx_irq_handler);
-	set_irq_wake(devirq, 1);
-
-	return chip;
-}
-
-int pm8xxx_irq_exit(struct pm_irq_chip *chip)
-{
-	irq_set_chained_handler(chip->devirq, NULL);
-	kfree(chip);
-	return 0;
-}

drivers/mfd/rc5t583-irq.c

···
  */
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/mfd/rc5t583.h>
 

drivers/mfd/rdc321x-southbridge.c

···
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>

drivers/mfd/retu-mfd.c

···
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/module.h>

drivers/mfd/rtsx_usb.c

···
+/* Driver for Realtek USB card reader
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Roger Tseng <[e-mail]>
+ */
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rtsx_usb.h>
+
+static int polling_pipe = 1;
+module_param(polling_pipe, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(polling_pipe, "polling pipe (0: ctl, 1: bulk)");
+
+static struct mfd_cell rtsx_usb_cells[] = {
+	[RTSX_USB_SD_CARD] = {
+		.name = "rtsx_usb_sdmmc",
+		.pdata_size = 0,
+	},
+	[RTSX_USB_MS_CARD] = {
+		.name = "rtsx_usb_ms",
+		.pdata_size = 0,
+	},
+};
+
+static void rtsx_usb_sg_timed_out(unsigned long data)
+{
+	struct rtsx_ucr *ucr = (struct rtsx_ucr *)data;
+
+	dev_dbg(&ucr->pusb_intf->dev, "%s: sg transfer timed out", __func__);
+	usb_sg_cancel(&ucr->current_sg);
+
+	/* we know the cancellation is caused by time-out */
+	ucr->current_sg.status = -ETIMEDOUT;
+}
+
+static int rtsx_usb_bulk_transfer_sglist(struct rtsx_ucr *ucr,
+		unsigned int pipe, struct scatterlist *sg, int num_sg,
+		unsigned int length, unsigned int *act_len, int timeout)
+{
+	int ret;
+
+	dev_dbg(&ucr->pusb_intf->dev, "%s: xfer %u bytes, %d entries\n",
+			__func__, length, num_sg);
+	ret = usb_sg_init(&ucr->current_sg, ucr->pusb_dev, pipe, 0,
+			sg, num_sg, length, GFP_NOIO);
+	if (ret)
+		return ret;
+
+	ucr->sg_timer.expires = jiffies + msecs_to_jiffies(timeout);
+	add_timer(&ucr->sg_timer);
+	usb_sg_wait(&ucr->current_sg);
+	del_timer(&ucr->sg_timer);
+
+	if (act_len)
+		*act_len = ucr->current_sg.bytes;
+
+	return ucr->current_sg.status;
+}
+
+int rtsx_usb_transfer_data(struct rtsx_ucr *ucr, unsigned int pipe,
+			      void *buf, unsigned int len, int num_sg,
+			      unsigned int *act_len, int timeout)
+{
+	if (timeout < 600)
+		timeout = 600;
+
+	if (num_sg)
+		return rtsx_usb_bulk_transfer_sglist(ucr, pipe,
+				(struct scatterlist *)buf, num_sg, len, act_len,
+				timeout);
+	else
+		return usb_bulk_msg(ucr->pusb_dev, pipe, buf, len, act_len,
+				timeout);
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_transfer_data);
+
+static inline void rtsx_usb_seq_cmd_hdr(struct rtsx_ucr *ucr,
+		u16 addr, u16 len, u8 seq_type)
+{
+	rtsx_usb_cmd_hdr_tag(ucr);
+
+	ucr->cmd_buf[PACKET_TYPE] = seq_type;
+	ucr->cmd_buf[5] = (u8)(len >> 8);
+	ucr->cmd_buf[6] = (u8)len;
+	ucr->cmd_buf[8] = (u8)(addr >> 8);
+	ucr->cmd_buf[9] = (u8)addr;
+
+	if (seq_type == SEQ_WRITE)
+		ucr->cmd_buf[STAGE_FLAG] = 0;
+	else
+		ucr->cmd_buf[STAGE_FLAG] = STAGE_R;
+}
+
+static int rtsx_usb_seq_write_register(struct rtsx_ucr *ucr,
+		u16 addr, u16 len, u8 *data)
+{
+	u16 cmd_len = ALIGN(SEQ_WRITE_DATA_OFFSET + len, 4);
+
+	if (!data)
+		return -EINVAL;
+
+	if (cmd_len > IOBUF_SIZE)
+		return -EINVAL;
+
+	rtsx_usb_seq_cmd_hdr(ucr, addr, len, SEQ_WRITE);
+	memcpy(ucr->cmd_buf + SEQ_WRITE_DATA_OFFSET, data, len);
+
+	return rtsx_usb_transfer_data(ucr,
+			usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT),
+			ucr->cmd_buf, cmd_len, 0, NULL, 100);
+}
+
+static int rtsx_usb_seq_read_register(struct rtsx_ucr *ucr,
+		u16 addr, u16 len, u8 *data)
+{
+	int i, ret;
+	u16 rsp_len = round_down(len, 4);
+	u16 res_len = len - rsp_len;
+
+	if (!data)
+		return -EINVAL;
+
+	/* 4-byte aligned part */
+	if (rsp_len) {
+		rtsx_usb_seq_cmd_hdr(ucr, addr, len, SEQ_READ);
+		ret = rtsx_usb_transfer_data(ucr,
+				usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT),
+				ucr->cmd_buf, 12, 0, NULL, 100);
+		if (ret)
+			return ret;
+
+		ret = rtsx_usb_transfer_data(ucr,
+				usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN),
+				data, rsp_len, 0, NULL, 100);
+		if (ret)
+			return ret;
+	}
+
+	/* unaligned part */
+	for (i = 0; i < res_len; i++) {
+		ret = rtsx_usb_read_register(ucr, addr + rsp_len + i,
+				data + rsp_len + i);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+int rtsx_usb_read_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len)
+{
+	return rtsx_usb_seq_read_register(ucr, PPBUF_BASE2, (u16)buf_len, buf);
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_read_ppbuf);
+
+int rtsx_usb_write_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len)
+{
+	return rtsx_usb_seq_write_register(ucr, PPBUF_BASE2, (u16)buf_len, buf);
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_write_ppbuf);
+
+int rtsx_usb_ep0_write_register(struct rtsx_ucr *ucr, u16 addr,
+		u8 mask, u8 data)
+{
+	u16 value, index;
+
+	addr |= EP0_WRITE_REG_CMD << EP0_OP_SHIFT;
+	value = swab16(addr);
+	index = mask | data << 8;
+
+	return usb_control_msg(ucr->pusb_dev,
+			usb_sndctrlpipe(ucr->pusb_dev, 0), RTSX_USB_REQ_REG_OP,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			value, index, NULL, 0, 100);
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_ep0_write_register);
+
+int rtsx_usb_ep0_read_register(struct rtsx_ucr *ucr, u16 addr, u8 *data)
+{
+	u16 value;
+
+	if (!data)
+		return -EINVAL;
+	*data = 0;
+
+	addr |= EP0_READ_REG_CMD << EP0_OP_SHIFT;
+	value = swab16(addr);
+
+	return usb_control_msg(ucr->pusb_dev,
+			usb_rcvctrlpipe(ucr->pusb_dev, 0), RTSX_USB_REQ_REG_OP,
+			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			value, 0, data, 1, 100);
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_ep0_read_register);
+
+void rtsx_usb_add_cmd(struct rtsx_ucr *ucr, u8 cmd_type, u16 reg_addr,
+		u8 mask, u8 data)
+{
+	int i;
+
+	if (ucr->cmd_idx < (IOBUF_SIZE - CMD_OFFSET) / 4) {
+		i = CMD_OFFSET + ucr->cmd_idx * 4;
+
+		ucr->cmd_buf[i++] = ((cmd_type & 0x03) << 6) |
+			(u8)((reg_addr >> 8) & 0x3F);
+		ucr->cmd_buf[i++] = (u8)reg_addr;
+		ucr->cmd_buf[i++] = mask;
+		ucr->cmd_buf[i++] = data;
+
+		ucr->cmd_idx++;
+	}
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_add_cmd);
+
+int rtsx_usb_send_cmd(struct rtsx_ucr *ucr, u8 flag, int timeout)
+{
+	int ret;
+
+	ucr->cmd_buf[CNT_H] = (u8)(ucr->cmd_idx >> 8);
+	ucr->cmd_buf[CNT_L] = (u8)(ucr->cmd_idx);
+	ucr->cmd_buf[STAGE_FLAG] = flag;
+
+	ret = rtsx_usb_transfer_data(ucr,
+			usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT),
+			ucr->cmd_buf, ucr->cmd_idx * 4 + CMD_OFFSET,
+			0, NULL, timeout);
+	if (ret) {
+		rtsx_usb_clear_fsm_err(ucr);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_send_cmd);
+
+int rtsx_usb_get_rsp(struct rtsx_ucr *ucr, int rsp_len, int timeout)
+{
+	if (rsp_len <= 0)
+		return -EINVAL;
+
+	rsp_len = ALIGN(rsp_len, 4);
+
+	return rtsx_usb_transfer_data(ucr,
+			usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN),
+			ucr->rsp_buf, rsp_len, 0, NULL, timeout);
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_get_rsp);
+
+static int rtsx_usb_get_status_with_bulk(struct rtsx_ucr *ucr, u16 *status)
+{
+	int ret;
+
+	rtsx_usb_init_cmd(ucr);
+	rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_EXIST, 0x00, 0x00);
+	rtsx_usb_add_cmd(ucr, READ_REG_CMD, OCPSTAT, 0x00, 0x00);
+	ret = rtsx_usb_send_cmd(ucr, MODE_CR, 100);
+	if (ret)
+		return ret;
+
+	ret = rtsx_usb_get_rsp(ucr, 2, 100);
+	if (ret)
+		return ret;
+
+	*status = ((ucr->rsp_buf[0] >> 2) & 0x0f) |
+		  ((ucr->rsp_buf[1] & 0x03) << 4);
+
+	return 0;
+}
+
+int rtsx_usb_get_card_status(struct rtsx_ucr *ucr, u16 *status)
+{
+	int ret;
+
+	if (!status)
+		return -EINVAL;
+
+	if (polling_pipe == 0)
+		ret = usb_control_msg(ucr->pusb_dev,
+				usb_rcvctrlpipe(ucr->pusb_dev, 0),
+				RTSX_USB_REQ_POLL,
+				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				0, 0, status, 2, 100);
+	else
+		ret = rtsx_usb_get_status_with_bulk(ucr, status);
+
+	/* usb_control_msg may return positive when success */
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_get_card_status);
+
+static int rtsx_usb_write_phy_register(struct rtsx_ucr *ucr, u8 addr, u8 val)
+{
+	dev_dbg(&ucr->pusb_intf->dev, "Write 0x%x to phy register 0x%x\n",
+			val, addr);
+
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VSTAIN, 0xFF, val);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VCONTROL, 0xFF, addr & 0x0F);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x01);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VCONTROL,
+			0xFF, (addr >> 4) & 0x0F);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x01);
+
+	return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+int rtsx_usb_write_register(struct rtsx_ucr *ucr, u16 addr, u8 mask, u8 data)
+{
+	rtsx_usb_init_cmd(ucr);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, addr, mask, data);
+	return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_write_register);
+
+int rtsx_usb_read_register(struct rtsx_ucr *ucr, u16 addr, u8 *data)
+{
+	int ret;
+
+	if (data != NULL)
+		*data = 0;
+
+	rtsx_usb_init_cmd(ucr);
+	rtsx_usb_add_cmd(ucr, READ_REG_CMD, addr, 0, 0);
+	ret = rtsx_usb_send_cmd(ucr, MODE_CR, 100);
+	if (ret)
+		return ret;
+
+	ret = rtsx_usb_get_rsp(ucr, 1, 100);
+	if (ret)
+		return ret;
+
+	if (data != NULL)
+		*data = ucr->rsp_buf[0];
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_read_register);
+
+static inline u8 double_ssc_depth(u8 depth)
+{
+	return (depth > 1) ? (depth - 1) : depth;
+}
+
+static u8 revise_ssc_depth(u8 ssc_depth, u8 div)
+{
+	if (div > CLK_DIV_1) {
+		if (ssc_depth > div - 1)
+			ssc_depth -= (div - 1);
+		else
+			ssc_depth = SSC_DEPTH_2M;
+	}
+
+	return ssc_depth;
+}
+
+int rtsx_usb_switch_clock(struct rtsx_ucr *ucr, unsigned int card_clock,
+		u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk)
+{
+	int ret;
+	u8 n, clk_divider, mcu_cnt, div;
+
+	if (!card_clock) {
+		ucr->cur_clk = 0;
+		return 0;
+	}
+
+	if (initial_mode) {
+		/* We use 250k(around) here, in initial stage */
+		clk_divider = SD_CLK_DIVIDE_128;
+		card_clock = 30000000;
+	} else {
+		clk_divider = SD_CLK_DIVIDE_0;
+	}
+
+	ret = rtsx_usb_write_register(ucr, SD_CFG1,
+			SD_CLK_DIVIDE_MASK, clk_divider);
+	if (ret < 0)
+		return ret;
+
+	card_clock /= 1000000;
+	dev_dbg(&ucr->pusb_intf->dev,
+			"Switch card clock to %dMHz\n", card_clock);
+
+	if (!initial_mode && double_clk)
+		card_clock *= 2;
+	dev_dbg(&ucr->pusb_intf->dev,
+			"Internal SSC clock: %dMHz (cur_clk = %d)\n",
+			card_clock, ucr->cur_clk);
+
+	if (card_clock == ucr->cur_clk)
+		return 0;
+
+	/* Converting clock value into internal settings: n and div */
+	n = card_clock - 2;
+	if ((card_clock <= 2) || (n > MAX_DIV_N))
+		return -EINVAL;
+
+	mcu_cnt = 60/card_clock + 3;
+	if (mcu_cnt > 15)
+		mcu_cnt = 15;
+
+	/* Make sure that the SSC clock div_n is not less than MIN_DIV_N */
+
+	div = CLK_DIV_1;
+	while (n < MIN_DIV_N && div < CLK_DIV_4) {
+		n = (n + 2) * 2 - 2;
+		div++;
+	}
+	dev_dbg(&ucr->pusb_intf->dev, "n = %d, div = %d\n", n, div);
+
+	if (double_clk)
+		ssc_depth = double_ssc_depth(ssc_depth);
+
+	ssc_depth = revise_ssc_depth(ssc_depth, div);
+	dev_dbg(&ucr->pusb_intf->dev, "ssc_depth = %d\n", ssc_depth);
+
+	rtsx_usb_init_cmd(ucr);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV, CLK_CHANGE, CLK_CHANGE);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV,
+			0x3F, (div << 4) | mcu_cnt);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_CTL2,
+			SSC_DEPTH_MASK, ssc_depth);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, n);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, SSC_RSTB);
+	if (vpclk) {
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+				PHASE_NOT_RESET, 0);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+				PHASE_NOT_RESET, PHASE_NOT_RESET);
+	}
+
+	ret = rtsx_usb_send_cmd(ucr, MODE_C, 2000);
+	if (ret < 0)
+		return ret;
+
+	ret = rtsx_usb_write_register(ucr, SSC_CTL1, 0xff,
+			SSC_RSTB | SSC_8X_EN | SSC_SEL_4M);
+	if (ret < 0)
+		return ret;
+
+	/* Wait SSC clock stable */
+	usleep_range(100, 1000);
+
+	ret = rtsx_usb_write_register(ucr, CLK_DIV, CLK_CHANGE, 0);
+	if (ret < 0)
+		return ret;
+
+	ucr->cur_clk = card_clock;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_switch_clock);
+
+int rtsx_usb_card_exclusive_check(struct rtsx_ucr *ucr, int card)
+{
+	int ret;
+	u16 val;
+	u16 cd_mask[] = {
+		[RTSX_USB_SD_CARD] = (CD_MASK & ~SD_CD),
+		[RTSX_USB_MS_CARD] = (CD_MASK & ~MS_CD)
+	};
+
+	ret = rtsx_usb_get_card_status(ucr, &val);
+	/*
+	 * If get status fails, return 0 (ok) for the exclusive check
+	 * and let the flow fail at somewhere else.
+	 */
+	if (ret)
+		return 0;
+
+	if (val & cd_mask[card])
+		return -EIO;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_usb_card_exclusive_check);
+
+static int rtsx_usb_reset_chip(struct rtsx_ucr *ucr)
+{
+	int ret;
+	u8 val;
+
+	rtsx_usb_init_cmd(ucr);
+
+	if (CHECK_PKG(ucr, LQFP48)) {
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL,
+				LDO3318_PWR_MASK, LDO_SUSPEND);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL,
+				FORCE_LDO_POWERB, FORCE_LDO_POWERB);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1,
+				0x30, 0x10);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5,
+				0x03, 0x01);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6,
+				0x0C, 0x04);
+	}
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SYS_DUMMY0, NYET_MSAK, NYET_EN);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CD_DEGLITCH_WIDTH, 0xFF, 0x08);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+			CD_DEGLITCH_EN, XD_CD_DEGLITCH_EN, 0x0);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD30_DRIVE_SEL,
+			SD30_DRIVE_MASK, DRIVER_TYPE_D);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+			CARD_DRIVE_SEL, SD20_DRIVE_MASK, 0x0);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, LDO_POWER_CFG, 0xE0, 0x0);
+
+	if (ucr->is_rts5179)
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				CARD_PULL_CTL5, 0x03, 0x01);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DMA1_CTL,
+		       EXTEND_DMA1_ASYNC_SIGNAL, EXTEND_DMA1_ASYNC_SIGNAL);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_INT_PEND,
+			XD_INT | MS_INT | SD_INT,
+			XD_INT | MS_INT | SD_INT);
+
+	ret = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+	if (ret)
+		return ret;
+
+	/* config non-crystal mode */
+	rtsx_usb_read_register(ucr, CFG_MODE, &val);
+	if ((val & XTAL_FREE) || ((val & CLK_MODE_MASK) == CLK_MODE_NON_XTAL)) {
+		ret = rtsx_usb_write_phy_register(ucr, 0xC2, 0x7C);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int rtsx_usb_init_chip(struct rtsx_ucr *ucr)
+{
+	int ret;
+	u8 val;
+
+	rtsx_usb_clear_fsm_err(ucr);
+
+	/* power on SSC */
+	ret = rtsx_usb_write_register(ucr,
+			FPDCTL, SSC_POWER_MASK, SSC_POWER_ON);
+	if (ret)
+		return ret;
+
+	usleep_range(100, 1000);
+	ret = rtsx_usb_write_register(ucr, CLK_DIV, CLK_CHANGE, 0x00);
+	if (ret)
+		return ret;
+
+	/* determine IC version */
+	ret = rtsx_usb_read_register(ucr, HW_VERSION, &val);
+	if (ret)
+		return ret;
+
+	ucr->ic_version = val & HW_VER_MASK;
+
+	/* determine package */
+	ret = rtsx_usb_read_register(ucr, CARD_SHARE_MODE, &val);
+	if (ret)
+		return ret;
+
+	if (val & CARD_SHARE_LQFP_SEL) {
+		ucr->package = LQFP48;
+		dev_dbg(&ucr->pusb_intf->dev, "Package: LQFP48\n");
+	} else {
+		ucr->package = QFN24;
+		dev_dbg(&ucr->pusb_intf->dev, "Package: QFN24\n");
+	}
+
+	/* determine IC variations */
+	rtsx_usb_read_register(ucr, CFG_MODE_1, &val);
+	if (val & RTS5179) {
+		ucr->is_rts5179 = true;
+		dev_dbg(&ucr->pusb_intf->dev, "Device is rts5179\n");
+	} else {
+		ucr->is_rts5179 = false;
+	}
+
+	return rtsx_usb_reset_chip(ucr);
+}
+
+static int rtsx_usb_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct rtsx_ucr *ucr;
+	int ret;
+
+	dev_dbg(&intf->dev,
+		": Realtek USB Card Reader found at bus %03d address %03d\n",
+		 usb_dev->bus->busnum, usb_dev->devnum);
+
+	ucr = devm_kzalloc(&intf->dev, sizeof(*ucr), GFP_KERNEL);
+	if (!ucr)
+		return -ENOMEM;
+
+	ucr->pusb_dev = usb_dev;
+
+	ucr->iobuf = usb_alloc_coherent(ucr->pusb_dev, IOBUF_SIZE,
+			GFP_KERNEL, &ucr->iobuf_dma);
+	if (!ucr->iobuf)
+		return -ENOMEM;
+
+	usb_set_intfdata(intf, ucr);
+
+	ucr->vendor_id = id->idVendor;
+	ucr->product_id = id->idProduct;
+	ucr->cmd_buf = ucr->rsp_buf = ucr->iobuf;
+
+	mutex_init(&ucr->dev_mutex);
+
+	ucr->pusb_intf = intf;
+
+	/* initialize */
+	ret = rtsx_usb_init_chip(ucr);
+	if (ret)
+		goto out_init_fail;
+
+	ret = mfd_add_devices(&intf->dev, usb_dev->devnum, rtsx_usb_cells,
+			ARRAY_SIZE(rtsx_usb_cells), NULL, 0, NULL);
+	if (ret)
+		goto out_init_fail;
+
+	/* initialize USB SG transfer timer */
+	init_timer(&ucr->sg_timer);
+	setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr);
+#ifdef CONFIG_PM
+	intf->needs_remote_wakeup = 1;
+	usb_enable_autosuspend(usb_dev);
+#endif
+
+	return 0;
+
+out_init_fail:
+	usb_free_coherent(ucr->pusb_dev, IOBUF_SIZE, ucr->iobuf,
+			ucr->iobuf_dma);
+	return ret;
+}
+
+static void rtsx_usb_disconnect(struct usb_interface *intf)
+{
+	struct rtsx_ucr *ucr = (struct rtsx_ucr *)usb_get_intfdata(intf);
+
+	dev_dbg(&intf->dev, "%s called\n", __func__);
+
+	mfd_remove_devices(&intf->dev);
+
+	usb_set_intfdata(ucr->pusb_intf, NULL);
+	usb_free_coherent(ucr->pusb_dev, IOBUF_SIZE, ucr->iobuf,
+			ucr->iobuf_dma);
+}
+
+#ifdef CONFIG_PM
+static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct rtsx_ucr *ucr =
+		(struct rtsx_ucr *)usb_get_intfdata(intf);
+
+	dev_dbg(&intf->dev, "%s called with pm message 0x%04u\n",
+			__func__, message.event);
+
+	mutex_lock(&ucr->dev_mutex);
+	rtsx_usb_turn_off_led(ucr);
+	mutex_unlock(&ucr->dev_mutex);
+	return 0;
+}
+
+static int rtsx_usb_resume(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static int rtsx_usb_reset_resume(struct usb_interface *intf)
+{
+	struct rtsx_ucr *ucr =
+		(struct rtsx_ucr *)usb_get_intfdata(intf);
+
+	rtsx_usb_reset_chip(ucr);
+	return 0;
+}
+
+#else /* CONFIG_PM */
+
+#define rtsx_usb_suspend NULL
+#define rtsx_usb_resume NULL
+#define rtsx_usb_reset_resume NULL
+
+#endif /* CONFIG_PM */
+
+
+static int rtsx_usb_pre_reset(struct usb_interface *intf)
+{
+	struct rtsx_ucr *ucr = (struct rtsx_ucr *)usb_get_intfdata(intf);
+
+	mutex_lock(&ucr->dev_mutex);
+	return 0;
+}
+
+static int rtsx_usb_post_reset(struct usb_interface *intf)
+{
+	struct rtsx_ucr *ucr = (struct rtsx_ucr *)usb_get_intfdata(intf);
+
+	mutex_unlock(&ucr->dev_mutex);
+	return 0;
+}
+
+static struct usb_device_id rtsx_usb_usb_ids[] = {
+	{ USB_DEVICE(0x0BDA, 0x0129) },
+	{ USB_DEVICE(0x0BDA, 0x0139) },
+	{ USB_DEVICE(0x0BDA, 0x0140) },
+	{ }
+};
+
+static struct usb_driver rtsx_usb_driver = {
+	.name			= "rtsx_usb",
+	.probe			= rtsx_usb_probe,
+	.disconnect		= rtsx_usb_disconnect,
+	.suspend		= rtsx_usb_suspend,
+	.resume			= rtsx_usb_resume,
+	.reset_resume		= rtsx_usb_reset_resume,
+	.pre_reset		= rtsx_usb_pre_reset,
+	.post_reset		= rtsx_usb_post_reset,
+	.id_table		= rtsx_usb_usb_ids,
+	.supports_autosuspend	= 1,
+	.soft_unbind		= 1,
+};
+
+module_usb_driver(rtsx_usb_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Roger Tseng <[e-mail]>");
+MODULE_DESCRIPTION("Realtek USB Card Reader Driver");

drivers/mfd/sec-core.c

···
 		.name = "s5m-rtc",
 	}, {
 		.name = "s5m8767-clk",
+		.of_compatible = "samsung,s5m8767-clk",
 	}
 };
 
···
 		.name = "s2mps11-pmic",
 	}, {
 		.name = "s2mps11-clk",
+		.of_compatible = "samsung,s2mps11-clk",
 	}
 };
 
···
 		.name = "s2mps14-rtc",
 	}, {
 		.name = "s2mps14-clk",
+		.of_compatible = "samsung,s2mps14-clk",
 	}
 };
 
···
 	switch (sec_pmic->device_type) {
 	case S2MPA01:
 		regmap = &s2mpa01_regmap_config;
+		/*
+		 * The rtc-s5m driver does not support S2MPA01 and there
+		 * is no mfd_cell for S2MPA01 RTC device.
+		 * However we must pass something to devm_regmap_init_i2c()
+		 * so use S5M-like regmap config even though it wouldn't work.
+		 */
+		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	case S2MPS11X:
 		regmap = &s2mps11_regmap_config;
···
 		ret = PTR_ERR(sec_pmic->regmap_rtc);
 		dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n",
 			ret);
-		return ret;
+		goto err_regmap_rtc;
 	}
 
 	if (pdata && pdata->cfg_pmic_irq)
···
 	}
 
 	if (ret)
-		goto err;
+		goto err_mfd;
 
 	device_init_wakeup(sec_pmic->dev, sec_pmic->wakeup);
 
 	return ret;
 
-err:
+err_mfd:
 	sec_irq_exit(sec_pmic);
+err_regmap_rtc:
 	i2c_unregister_device(sec_pmic->rtc);
 	return ret;
 }

drivers/mfd/smsc-ece1099.c

···
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>

drivers/mfd/stmpe.c

···
 		if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET))
 			return 0;
 		usleep_range(100, 200);
-	};
+	}
 	return -EIO;
 }
 

drivers/mfd/stw481x.c

···
 	},
 };
 
-const struct regmap_config stw481x_regmap_config = {
+static const struct regmap_config stw481x_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 };
···
 	i2c_set_clientdata(client, stw481x);
 	stw481x->client = client;
 	stw481x->map = devm_regmap_init_i2c(client, &stw481x_regmap_config);
+	if (IS_ERR(stw481x->map)) {
+		ret = PTR_ERR(stw481x->map);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
 
 	ret = stw481x_startup(stw481x);
 	if (ret) {

drivers/mfd/syscon.c

···
 
 static int syscon_match_pdevname(struct device *dev, void *data)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	const struct platform_device_id *id = platform_get_device_id(pdev);
-
-	if (id)
-		if (!strcmp(id->name, (const char *)data))
-			return 1;
-
 	return !strcmp(dev_name(dev), (const char *)data);
 }
 
···
 
 	platform_set_drvdata(pdev, syscon);
 
-	dev_info(dev, "regmap %pR registered\n", res);
+	dev_dbg(dev, "regmap %pR registered\n", res);
 
 	return 0;
 }

drivers/mfd/tc3589x.c

···
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/tc3589x.h>
+#include <linux/err.h>
 
 /**
  * enum tc3589x_version - indicates the TC3589x version
···
 		.name		= "tc3589x-gpio",
 		.num_resources	= ARRAY_SIZE(gpio_resources),
 		.resources	= &gpio_resources[0],
-		.of_compatible	= "tc3589x-gpio",
+		.of_compatible	= "toshiba,tc3589x-gpio",
 	},
 };
 
···
 		.name           = "tc3589x-keypad",
 		.num_resources  = ARRAY_SIZE(keypad_resources),
 		.resources      = &keypad_resources[0],
-		.of_compatible	= "tc3589x-keypad",
+		.of_compatible	= "toshiba,tc3589x-keypad",
 	},
 };
 
···
 	return ret;
 }
 
-static int tc3589x_of_probe(struct device_node *np,
-			struct tc3589x_platform_data *pdata)
+#ifdef CONFIG_OF
+static const struct of_device_id tc3589x_match[] = {
+	/* Legacy compatible string */
+	{ .compatible = "tc3589x", .data = (void *) TC3589X_UNKNOWN },
+	{ .compatible = "toshiba,tc35890", .data = (void *) TC3589X_TC35890 },
+	{ .compatible = "toshiba,tc35892", .data = (void *) TC3589X_TC35892 },
+	{ .compatible = "toshiba,tc35893", .data = (void *) TC3589X_TC35893 },
+	{ .compatible = "toshiba,tc35894", .data = (void *) TC3589X_TC35894 },
+	{ .compatible = "toshiba,tc35895", .data = (void *) TC3589X_TC35895 },
+	{ .compatible = "toshiba,tc35896", .data = (void *) TC3589X_TC35896 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, tc3589x_match);
+
+static struct tc3589x_platform_data *
+tc3589x_of_probe(struct device *dev, enum tc3589x_version *version)
 {
+	struct device_node *np = dev->of_node;
+	struct tc3589x_platform_data *pdata;
 	struct device_node *child;
+	const struct of_device_id *of_id;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	of_id = of_match_device(tc3589x_match, dev);
+	if (!of_id)
+		return ERR_PTR(-ENODEV);
+	*version = (enum tc3589x_version) of_id->data;
 
 	for_each_child_of_node(np, child) {
-		if (!strcmp(child->name, "tc3589x_gpio")) {
+		if (of_device_is_compatible(child, "toshiba,tc3589x-gpio"))
 			pdata->block |= TC3589x_BLOCK_GPIO;
-		}
-		if (!strcmp(child->name, "tc3589x_keypad")) {
+		if (of_device_is_compatible(child, "toshiba,tc3589x-keypad"))
 			pdata->block |= TC3589x_BLOCK_KEYPAD;
-		}
 	}
 
-	return 0;
+	return pdata;
 }
+#else
+static inline struct tc3589x_platform_data *
+tc3589x_of_probe(struct device *dev, enum tc3589x_version *version)
+{
+	dev_err(dev, "no device tree support\n");
+	return ERR_PTR(-ENODEV);
+}
+#endif
 
 static int tc3589x_probe(struct i2c_client *i2c,
 				   const struct i2c_device_id *id)
 {
-	struct tc3589x_platform_data *pdata = dev_get_platdata(&i2c->dev);
 	struct device_node *np = i2c->dev.of_node;
+	struct tc3589x_platform_data *pdata = dev_get_platdata(&i2c->dev);
 	struct tc3589x *tc3589x;
+	enum tc3589x_version version;
 	int ret;
 
 	if (!pdata) {
-		if (np) {
-			pdata = devm_kzalloc(&i2c->dev, sizeof(*pdata), GFP_KERNEL);
-			if (!pdata)
-				return -ENOMEM;
-
-			ret = tc3589x_of_probe(np, pdata);
-			if (ret)
-				return ret;
-		}
-		else {
+		pdata = tc3589x_of_probe(&i2c->dev, &version);
+		if (IS_ERR(pdata)) {
 			dev_err(&i2c->dev, "No platform data or DT found\n");
-			return -EINVAL;
+			return PTR_ERR(pdata);
 		}
+	} else {
+		/* When not probing from device tree we have this ID */
+		version = id->driver_data;
 	}
 
 	if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA
···
 	tc3589x->pdata = pdata;
 	tc3589x->irq_base = pdata->irq_base;
 
-	switch (id->driver_data) {
+	switch (version) {
 	case TC3589X_TC35893:
 	case TC3589X_TC35895:
 	case TC3589X_TC35896:
···
 MODULE_DEVICE_TABLE(i2c, tc3589x_id);
 
 static struct i2c_driver tc3589x_driver = {
-	.driver.name	= "tc3589x",
-	.driver.owner	= THIS_MODULE,
-	.driver.pm	= &tc3589x_dev_pm_ops,
+	.driver = {
+		.name	= "tc3589x",
+		.owner	= THIS_MODULE,
+		.pm	= &tc3589x_dev_pm_ops,
+		.of_match_table = of_match_ptr(tc3589x_match),
+	},
 	.probe		= tc3589x_probe,
 	.remove		= tc3589x_remove,
 	.id_table	= tc3589x_id,

drivers/mfd/ti-ssp.c

···
-/*
- * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs
- *
- * Copyright (C) 2010 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/sched.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/ti_ssp.h>
-
-/* Register Offsets */
-#define REG_REV		0x00
-#define REG_IOSEL_1	0x04
-#define REG_IOSEL_2	0x08
-#define REG_PREDIV	0x0c
-#define REG_INTR_ST	0x10
-#define REG_INTR_EN	0x14
-#define REG_TEST_CTRL	0x18
-
-/* Per port registers */
-#define PORT_CFG_2	0x00
-#define PORT_ADDR	0x04
-#define PORT_DATA	0x08
-#define PORT_CFG_1	0x0c
-#define PORT_STATE	0x10
-
-#define SSP_PORT_CONFIG_MASK	(SSP_EARLY_DIN | SSP_DELAY_DOUT)
-#define SSP_PORT_CLKRATE_MASK	0x0f
-
-#define SSP_SEQRAM_WR_EN	BIT(4)
-#define SSP_SEQRAM_RD_EN	BIT(5)
-#define SSP_START		BIT(15)
-#define SSP_BUSY		BIT(10)
-#define SSP_PORT_ASL		BIT(7)
-#define SSP_PORT_CFO1		BIT(6)
-
-#define SSP_PORT_SEQRAM_SIZE	32
-
-static const int ssp_port_base[]   = {0x040, 0x080};
-static const int ssp_port_seqram[] = {0x100, 0x180};
-
-struct ti_ssp {
-	struct resource		*res;
-	struct device		*dev;
-	void __iomem		*regs;
-	spinlock_t		lock;
-	struct clk		*clk;
-	int			irq;
-	wait_queue_head_t	wqh;
-
-	/*
-	 * Some of the iosel2 register bits always read-back as 0, we need to
-	 * remember these values so that we don't clobber previously set
-	 * values.
-	 */
-	u32			iosel2;
-};
-
-static inline struct ti_ssp *dev_to_ssp(struct device *dev)
-{
-	return dev_get_drvdata(dev->parent);
-}
-
-static inline int dev_to_port(struct device *dev)
-{
-	return to_platform_device(dev)->id;
-}
-
-/* Register Access Helpers, rmw() functions need to run locked */
-static inline u32 ssp_read(struct ti_ssp *ssp, int reg)
-{
-	return __raw_readl(ssp->regs + reg);
-}
-
-static inline void ssp_write(struct ti_ssp *ssp, int reg, u32 val)
-{
-	__raw_writel(val, ssp->regs + reg);
-}
-
-static inline void ssp_rmw(struct ti_ssp *ssp, int reg, u32 mask, u32 bits)
-{
-	ssp_write(ssp, reg, (ssp_read(ssp, reg) & ~mask) | bits);
-}
-
-static inline u32 ssp_port_read(struct ti_ssp *ssp, int port, int reg)
-{
-	return ssp_read(ssp, ssp_port_base[port] + reg);
-}
-
-static inline void ssp_port_write(struct ti_ssp *ssp, int port, int reg,
-				  u32 val)
-{
-	ssp_write(ssp, ssp_port_base[port] + reg, val);
-}
-
-static inline void ssp_port_rmw(struct ti_ssp *ssp, int port, int reg,
-				u32 mask, u32 bits)
-{
-	ssp_rmw(ssp, ssp_port_base[port] + reg, mask, bits);
-}
-
-static inline void ssp_port_clr_bits(struct ti_ssp *ssp, int port, int reg,
-				     u32 bits)
-{
-	ssp_port_rmw(ssp, port, reg, bits, 0);
-}
-
-static inline void ssp_port_set_bits(struct ti_ssp *ssp, int port, int reg,
-				     u32 bits)
-{
-	ssp_port_rmw(ssp, port, reg, 0, bits);
-}
-
-/* Called to setup port clock mode, caller must hold ssp->lock */
-static int __set_mode(struct ti_ssp *ssp, int port, int mode)
-{
-	mode &= SSP_PORT_CONFIG_MASK;
-	ssp_port_rmw(ssp, port, PORT_CFG_1, SSP_PORT_CONFIG_MASK, mode);
-
-	return 0;
-}
-
-int ti_ssp_set_mode(struct device *dev, int mode)
-{
-	struct ti_ssp *ssp = dev_to_ssp(dev);
-	int port = dev_to_port(dev);
-	int ret;
-
-	spin_lock(&ssp->lock);
-	ret = __set_mode(ssp, port, mode);
-	spin_unlock(&ssp->lock);
-
-	return ret;
-}
-EXPORT_SYMBOL(ti_ssp_set_mode);
-
-/* Called to setup iosel2, caller must hold ssp->lock */
-static void __set_iosel2(struct ti_ssp *ssp, u32 mask, u32 val)
-{
-	ssp->iosel2 = (ssp->iosel2 & ~mask) | val;
-	ssp_write(ssp, REG_IOSEL_2, ssp->iosel2);
-}
-
-/* Called to setup port iosel, caller must hold ssp->lock */
-static void __set_iosel(struct ti_ssp *ssp, int port, u32 iosel)
-{
-	unsigned val, shift = port ? 16 : 0;
-
-	/* IOSEL1 gets the least significant 16 bits */
-	val = ssp_read(ssp, REG_IOSEL_1);
-	val &= 0xffff << (port ? 0 : 16);
-	val |= (iosel & 0xffff) << (port ? 16 : 0);
-	ssp_write(ssp, REG_IOSEL_1, val);
-
-	/* IOSEL2 gets the most significant 16 bits */
-	val = (iosel >> 16) & 0x7;
-	__set_iosel2(ssp, 0x7 << shift, val << shift);
-}
-
-int ti_ssp_set_iosel(struct device *dev, u32 iosel)
-{
-	struct ti_ssp *ssp = dev_to_ssp(dev);
-	int port = dev_to_port(dev);
-
-	spin_lock(&ssp->lock);
-	__set_iosel(ssp, port, iosel);
-	spin_unlock(&ssp->lock);
-
-	return 0;
-}
-EXPORT_SYMBOL(ti_ssp_set_iosel);
-
-int ti_ssp_load(struct device *dev, int offs, u32* prog, int len)
-{
-	struct ti_ssp *ssp = dev_to_ssp(dev);
-	int port = dev_to_port(dev);
-	int i;
-
-	if (len > SSP_PORT_SEQRAM_SIZE)
-		return -ENOSPC;
-
-	spin_lock(&ssp->lock);
-
-	/* Enable SeqRAM access */
-	ssp_port_set_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN);
-
-	/* Copy code */
-	for (i = 0; i < len; i++) {
-		__raw_writel(prog[i], ssp->regs + offs + 4*i +
-			     ssp_port_seqram[port]);
-	}
-
-	/* Disable SeqRAM access */
-	ssp_port_clr_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN);
-
-	spin_unlock(&ssp->lock);
-
-	return 0;
-}
-EXPORT_SYMBOL(ti_ssp_load);
-
-int ti_ssp_raw_read(struct device *dev)
-{
-	struct ti_ssp *ssp = dev_to_ssp(dev);
-	int port = dev_to_port(dev);
-	int shift = port ? 27 : 11;
-
-	return (ssp_read(ssp, REG_IOSEL_2) >> shift) & 0xf;
-}
-EXPORT_SYMBOL(ti_ssp_raw_read);
-
-int ti_ssp_raw_write(struct device *dev, u32 val)
-{
-	struct ti_ssp *ssp = dev_to_ssp(dev);
-	int port = dev_to_port(dev), shift;
-
-	spin_lock(&ssp->lock);
-
-	shift = port ? 22 : 6;
-	val &= 0xf;
-	__set_iosel2(ssp, 0xf << shift, val << shift);
-
-	spin_unlock(&ssp->lock);
-
-	return 0;
-}
-EXPORT_SYMBOL(ti_ssp_raw_write);
-
-static inline int __xfer_done(struct ti_ssp *ssp, int port)
-{
-	return !(ssp_port_read(ssp, port, PORT_CFG_1) & SSP_BUSY);
-}
-
-int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output)
-{
-	struct ti_ssp *ssp = dev_to_ssp(dev);
-	int port = dev_to_port(dev);
-	int ret;
-
-	if (pc & ~(0x3f))
-		return -EINVAL;
-
-	/* Grab ssp->lock to serialize rmw on ssp registers */
-	spin_lock(&ssp->lock);
-
-	ssp_port_write(ssp, port, PORT_ADDR, input >> 16);
-	ssp_port_write(ssp, port, PORT_DATA, input & 0xffff);
-	ssp_port_rmw(ssp, port, PORT_CFG_1, 0x3f, pc);
-
-	/* grab wait queue head lock to avoid race with the isr */
-	spin_lock_irq(&ssp->wqh.lock);
-
-	/* kick off sequence execution in hardware */
-	ssp_port_set_bits(ssp, port, PORT_CFG_1, SSP_START);
-
-	/* drop ssp lock; no register writes beyond this */
-	spin_unlock(&ssp->lock);
-
-	ret = wait_event_interruptible_locked_irq(ssp->wqh,
-						  __xfer_done(ssp, port));
-	spin_unlock_irq(&ssp->wqh.lock);
-
-	if (ret < 0)
-		return ret;
-
-	if (output) {
-		*output = (ssp_port_read(ssp, port, PORT_ADDR) << 16) |
-			  (ssp_port_read(ssp, port, PORT_DATA) &  0xffff);
-	}
-
-	ret = ssp_port_read(ssp, port, PORT_STATE) & 0x3f; /* stop address */
-
-	return ret;
-}
-EXPORT_SYMBOL(ti_ssp_run);
-
-static irqreturn_t ti_ssp_interrupt(int irq, void *dev_data)
-{
-	struct ti_ssp *ssp = dev_data;
-
-	spin_lock(&ssp->wqh.lock);
-
-	ssp_write(ssp, REG_INTR_ST, 0x3);
-	wake_up_locked(&ssp->wqh);
-
-	spin_unlock(&ssp->wqh.lock);
-
-	return IRQ_HANDLED;
-}
-
-static int ti_ssp_probe(struct platform_device *pdev)
-{
-	static struct ti_ssp *ssp;
-	const struct ti_ssp_data *pdata = dev_get_platdata(&pdev->dev);
-	int error = 0, prediv = 0xff, id;
-	unsigned long sysclk;
-	struct device *dev = &pdev->dev;
-	struct mfd_cell cells[2];
-
-	ssp = kzalloc(sizeof(*ssp), GFP_KERNEL);
-	if (!ssp) {
-		dev_err(dev, "cannot allocate device info\n");
-		return -ENOMEM;
-	}
-
-	ssp->dev = dev;
-	dev_set_drvdata(dev, ssp);
-
-	ssp->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!ssp->res) {
-		error = -ENODEV;
-		dev_err(dev, "cannot determine register area\n");
-		goto error_res;
-	}
-
-	if (!request_mem_region(ssp->res->start, resource_size(ssp->res),
-				pdev->name)) {
-		error = -ENOMEM;
-		dev_err(dev, "cannot claim register memory\n");
-		goto error_res;
-	}
-
-	ssp->regs = ioremap(ssp->res->start, resource_size(ssp->res));
-	if (!ssp->regs) {
-		error = -ENOMEM;
-		dev_err(dev, "cannot map register memory\n");
-		goto error_map;
-	}
-
-	ssp->clk = clk_get(dev, NULL);
-	if (IS_ERR(ssp->clk)) {
-		error = PTR_ERR(ssp->clk);
-		dev_err(dev, "cannot claim device clock\n");
-		goto error_clk;
-	}
-
-	ssp->irq = platform_get_irq(pdev, 0);
-	if (ssp->irq < 0) {
-		error = -ENODEV;
-		dev_err(dev, "unknown irq\n");
-		goto error_irq;
-	}
-
-	error = request_threaded_irq(ssp->irq, NULL, ti_ssp_interrupt, 0,
-				     dev_name(dev), ssp);
-	if (error < 0) {
-		dev_err(dev, "cannot acquire irq\n");
-		goto error_irq;
-	}
-
-	spin_lock_init(&ssp->lock);
-	init_waitqueue_head(&ssp->wqh);
-
-	/* Power on and initialize SSP */
-	error = clk_enable(ssp->clk);
-	if (error) {
-		dev_err(dev, "cannot enable device clock\n");
-		goto error_enable;
-	}
-
-	/* Reset registers to a sensible known state */
-	ssp_write(ssp, REG_IOSEL_1, 0);
-	ssp_write(ssp, REG_IOSEL_2, 0);
-	ssp_write(ssp, REG_INTR_EN, 0x3);
-	ssp_write(ssp, REG_INTR_ST, 0x3);
-	ssp_write(ssp, REG_TEST_CTRL, 0);
-	ssp_port_write(ssp, 0, PORT_CFG_1, SSP_PORT_ASL);
-	ssp_port_write(ssp, 1, PORT_CFG_1, SSP_PORT_ASL);
-	ssp_port_write(ssp, 0, PORT_CFG_2, SSP_PORT_CFO1);
-	ssp_port_write(ssp, 1, PORT_CFG_2, SSP_PORT_CFO1);
-
-	sysclk = clk_get_rate(ssp->clk);
-	if (pdata && pdata->out_clock)
-		prediv = (sysclk / pdata->out_clock) - 1;
-	prediv = clamp(prediv, 0, 0xff);
-	ssp_rmw(ssp, REG_PREDIV, 0xff, prediv);
-
-	memset(cells, 0, sizeof(cells));
-	for (id = 0; id < 2; id++) {
-		const struct ti_ssp_dev_data *data = &pdata->dev_data[id];
-
-		cells[id].id		= id;
-		cells[id].name		= data->dev_name;
-		cells[id].platform_data	= data->pdata;
-	}
-
-	error = mfd_add_devices(dev, 0, cells, 2, NULL, 0, NULL);
-	if (error < 0) {
-		dev_err(dev, "cannot add mfd cells\n");
-		goto error_enable;
-	}
-
-	return 0;
-
-error_enable:
-	free_irq(ssp->irq, ssp);
-error_irq:
-	clk_put(ssp->clk);
-error_clk:
-	iounmap(ssp->regs);
-error_map:
-	release_mem_region(ssp->res->start, resource_size(ssp->res));
-error_res:
-	kfree(ssp);
-	return error;
-}
-
-static int ti_ssp_remove(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct ti_ssp *ssp = dev_get_drvdata(dev);
-
-	mfd_remove_devices(dev);
-	clk_disable(ssp->clk);
-	free_irq(ssp->irq, ssp);
-	clk_put(ssp->clk);
-	iounmap(ssp->regs);
-	release_mem_region(ssp->res->start, resource_size(ssp->res));
-	kfree(ssp);
-	return 0;
-}
-
-static struct platform_driver ti_ssp_driver = {
-	.probe		= ti_ssp_probe,
-	.remove		= ti_ssp_remove,
-	.driver		= {
-		.name	= "ti-ssp",
-		.owner	= THIS_MODULE,
-	}
-};
-
-module_platform_driver(ti_ssp_driver);
-
-MODULE_DESCRIPTION("Sequencer Serial Port (SSP) Driver");
-MODULE_AUTHOR("Cyril Chemparathy");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ti-ssp");

drivers/mfd/ti_am335x_tscadc.c

···
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/io.h>
···
 		return -EINVAL;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "no memory resource defined.\n");
-		return -EINVAL;
-	}
-
 	/* Allocate memory for device */
 	tscadc = devm_kzalloc(&pdev->dev,
 			sizeof(struct ti_tscadc_dev), GFP_KERNEL);
···
 	} else
 		tscadc->irq = err;
 
-	res = devm_request_mem_region(&pdev->dev,
-			res->start, resource_size(res), pdev->name);
-	if (!res) {
-		dev_err(&pdev->dev, "failed to reserve registers.\n");
-		return -EBUSY;
-	}
-
-	tscadc->tscadc_base = devm_ioremap(&pdev->dev,
-			res->start, resource_size(res));
-	if (!tscadc->tscadc_base) {
-		dev_err(&pdev->dev, "failed to map registers.\n");
-		return -ENOMEM;
-	}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	tscadc->tscadc_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(tscadc->tscadc_base))
+		return PTR_ERR(tscadc->tscadc_base);
 
 	tscadc->regmap_tscadc = devm_regmap_init_mmio(&pdev->dev,
 			tscadc->tscadc_base, &tscadc_regmap_config);

drivers/mfd/timberdale.c

···
 	for (i = 0; i < TIMBERDALE_NR_IRQS; i++)
 		msix_entries[i].entry = i;
 
-	err = pci_enable_msix(dev, msix_entries, TIMBERDALE_NR_IRQS);
+	err = pci_enable_msix_exact(dev, msix_entries, TIMBERDALE_NR_IRQS);
 	if (err) {
 		dev_err(&dev->dev,
 			"MSI-X init failed: %d, expected entries: %d\n",

drivers/mfd/tps65218.c

···
+/*
+ * Driver for TPS65218 Integrated power management chipsets
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps65218.h>
+
+#define TPS65218_PASSWORD_REGS_UNLOCK   0x7D
+
+/**
+ * tps65218_reg_read: Read a single tps65218 register.
+ *
+ * @tps: Device to read from.
+ * @reg: Register to read.
+ * @val: Contians the value
+ */
+int tps65218_reg_read(struct tps65218 *tps, unsigned int reg,
+			unsigned int *val)
+{
+	return regmap_read(tps->regmap, reg, val);
+}
+EXPORT_SYMBOL_GPL(tps65218_reg_read);
+
+/**
+ * tps65218_reg_write: Write a single tps65218 register.
+ *
+ * @tps65218: Device to write to.
+ * @reg: Register to write to.
+ * @val: Value to write.
+ * @level: Password protected level
+ */
+int tps65218_reg_write(struct tps65218 *tps, unsigned int reg,
+			unsigned int val, unsigned int level)
+{
+	int ret;
+	unsigned int xor_reg_val;
+
+	switch (level) {
+	case TPS65218_PROTECT_NONE:
+		return regmap_write(tps->regmap, reg, val);
+	case TPS65218_PROTECT_L1:
+		xor_reg_val = reg ^ TPS65218_PASSWORD_REGS_UNLOCK;
+		ret = regmap_write(tps->regmap, TPS65218_REG_PASSWORD,
+							xor_reg_val);
+		if (ret < 0)
+			return ret;
+
+		return regmap_write(tps->regmap, reg, val);
+	default:
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL_GPL(tps65218_reg_write);
+
+/**
+ * tps65218_update_bits: Modify bits w.r.t mask, val and level.
+ *
+ * @tps65218: Device to write to.
+ * @reg: Register to read-write to.
+ * @mask: Mask.
+ * @val: Value to write.
+ * @level: Password protected level
+ */
+static int tps65218_update_bits(struct tps65218 *tps, unsigned int reg,
+		unsigned int mask, unsigned int val, unsigned int level)
+{
+	int ret;
+	unsigned int data;
+
+	ret = tps65218_reg_read(tps, reg, &data);
+	if (ret) {
+		dev_err(tps->dev, "Read from reg 0x%x failed\n", reg);
+		return ret;
+	}
+
+	data &= ~mask;
+	data |= val & mask;
+
+	mutex_lock(&tps->tps_lock);
+	ret = tps65218_reg_write(tps, reg, data, level);
+	if (ret)
+		dev_err(tps->dev, "Write for reg 0x%x failed\n", reg);
+	mutex_unlock(&tps->tps_lock);
+
+	return ret;
+}
+
+int tps65218_set_bits(struct tps65218 *tps, unsigned int reg,
+		unsigned int mask, unsigned int val, unsigned int level)
+{
+	return tps65218_update_bits(tps, reg, mask, val, level);
+}
+EXPORT_SYMBOL_GPL(tps65218_set_bits);
+
+int tps65218_clear_bits(struct tps65218 *tps, unsigned int reg,
+		unsigned int mask, unsigned int level)
+{
+	return tps65218_update_bits(tps, reg, mask, 0, level);
+}
+EXPORT_SYMBOL_GPL(tps65218_clear_bits);
+
+static struct regmap_config tps65218_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static const struct regmap_irq tps65218_irqs[] = {
+	/* INT1 IRQs */
+	[TPS65218_PRGC_IRQ] = {
+		.mask = TPS65218_INT1_PRGC,
+	},
+	[TPS65218_CC_AQC_IRQ] = {
+		.mask = TPS65218_INT1_CC_AQC,
+	},
+	[TPS65218_HOT_IRQ] = {
+		.mask = TPS65218_INT1_HOT,
+	},
+	[TPS65218_PB_IRQ] = {
+		.mask = TPS65218_INT1_PB,
+	},
+	[TPS65218_AC_IRQ] = {
+		.mask = TPS65218_INT1_AC,
+	},
+	[TPS65218_VPRG_IRQ] = {
+		.mask = TPS65218_INT1_VPRG,
+	},
+	[TPS65218_INVALID1_IRQ] = {
+	},
+	[TPS65218_INVALID2_IRQ] = {
+	},
+	/* INT2 IRQs*/
+	[TPS65218_LS1_I_IRQ] = {
+		.mask = TPS65218_INT2_LS1_I,
+		.reg_offset = 1,
+	},
+	[TPS65218_LS2_I_IRQ] = {
+		.mask = TPS65218_INT2_LS2_I,
+		.reg_offset = 1,
+	},
+	[TPS65218_LS3_I_IRQ] = {
+		.mask = TPS65218_INT2_LS3_I,
+		.reg_offset = 1,
+	},
+	[TPS65218_LS1_F_IRQ] = {
+		.mask = TPS65218_INT2_LS1_F,
+		.reg_offset = 1,
+	},
+	[TPS65218_LS2_F_IRQ] = {
+		.mask = TPS65218_INT2_LS2_F,
+		.reg_offset = 1,
+	},
+	[TPS65218_LS3_F_IRQ] = {
+		.mask = TPS65218_INT2_LS3_F,
+		.reg_offset = 1,
+	},
+	[TPS65218_INVALID3_IRQ] = {
+	},
+	[TPS65218_INVALID4_IRQ] = {
+	},
+};
+
+static struct regmap_irq_chip tps65218_irq_chip = {
+	.name = "tps65218",
+	.irqs = tps65218_irqs,
+	.num_irqs = ARRAY_SIZE(tps65218_irqs),
+
+	.num_regs = 2,
+	.mask_base = TPS65218_REG_INT_MASK1,
+};
+
+static const struct of_device_id of_tps65218_match_table[] = {
+	{ .compatible = "ti,tps65218", },
+};
+
+static int tps65218_probe(struct i2c_client *client,
+				const struct i2c_device_id *ids)
+{
+	struct tps65218 *tps;
+	const struct of_device_id *match;
+	int ret;
+
+	match = of_match_device(of_tps65218_match_table, &client->dev);
+	if (!match) {
+		dev_err(&client->dev,
+			"Failed to find matching dt id\n");
+		return -EINVAL;
+	}
+
+	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+	if (!tps)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, tps);
+	tps->dev = &client->dev;
+	tps->irq = client->irq;
+	tps->regmap = devm_regmap_init_i2c(client, &tps65218_regmap_config);
+	if (IS_ERR(tps->regmap)) {
+		ret = PTR_ERR(tps->regmap);
+		dev_err(tps->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	mutex_init(&tps->tps_lock);
+
+	ret = regmap_add_irq_chip(tps->regmap, tps->irq,
+			IRQF_ONESHOT, 0, &tps65218_irq_chip,
+			&tps->irq_data);
+	if (ret < 0)
+		return ret;
+
+	ret = of_platform_populate(client->dev.of_node, NULL, NULL,
+				   &client->dev);
+	if (ret < 0)
+		goto err_irq;
+
+	return 0;
+
+err_irq:
+	regmap_del_irq_chip(tps->irq, tps->irq_data);
+
+	return ret;
+}
+
+static int tps65218_remove(struct i2c_client *client)
+{
+	struct tps65218 *tps = i2c_get_clientdata(client);
+
+	regmap_del_irq_chip(tps->irq, tps->irq_data);
+
+	return 0;
+}
+
+static const struct i2c_device_id tps65218_id_table[] = {
+	{ "tps65218", TPS65218 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, tps65218_id_table);
+
+static struct i2c_driver tps65218_driver = {
+	.driver		= {
+		.name	= "tps65218",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_tps65218_match_table,
+	},
+	.probe		= tps65218_probe,
+	.remove		= tps65218_remove,
+	.id_table       = tps65218_id_table,
+};
+
+module_i2c_driver(tps65218_driver);
+
+MODULE_AUTHOR("J Keerthy <[e-mail]>");
+MODULE_DESCRIPTION("TPS65218 chip family multi-function driver");
+MODULE_LICENSE("GPL v2");

drivers/mfd/tps65910.c

···
 	ret = regmap_add_irq_chip(tps65910->regmap, tps65910->chip_irq,
 		IRQF_ONESHOT, pdata->irq_base,
 		tps6591x_irqs_chip, &tps65910->irq_data);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_warn(tps65910->dev, "Failed to add irq_chip %d\n", ret);
+		tps65910->chip_irq = 0;
+	}
 	return ret;
 }
 
···
 			      regmap_irq_get_domain(tps65910->irq_data));
 	if (ret < 0) {
 		dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret);
+		tps65910_irq_exit(tps65910);
 		return ret;
 	}
 

drivers/mfd/tps65912-core.c

···
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/mfd/core.h>

drivers/mfd/tps65912-irq.c

···
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/bug.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>

drivers/mfd/twl-core.c

···
 static bool twl4030_49_nop_reg(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
-	case 0:
-	case 3:
-	case 40:
-	case 41:
-	case 42:
+	case 0x00:
+	case 0x03:
+	case 0x40:
+	case 0x41:
+	case 0x42:
 		return false;
 	default:
 		return true;

drivers/mfd/twl4030-irq.c

···
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
-#include <linux/init.h>
 #include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>

drivers/mfd/twl4030-madc.c drivers/iio/adc/twl4030-madc.c

···
  *
  */
 
-#include <linux/init.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
···
 #include <linux/gfp.h>
 #include <linux/err.h>
 
-/*
+#include <linux/iio/iio.h>
+
+/**
  * struct twl4030_madc_data - a container for madc info
- * @dev - pointer to device structure for madc
- * @lock - mutex protecting this data structure
- * @requests - Array of request struct corresponding to SW1, SW2 and RT
- * @imr - Interrupt mask register of MADC
- * @isr - Interrupt status register of MADC
+ * @dev:		Pointer to device structure for madc
+ * @lock:		Mutex protecting this data structure
+ * @requests:		Array of request struct corresponding to SW1, SW2 and RT
+ * @use_second_irq:	IRQ selection (main or co-processor)
+ * @imr:		Interrupt mask register of MADC
+ * @isr:		Interrupt status register of MADC
  */
 struct twl4030_madc_data {
 	struct device *dev;
 	struct mutex lock;	/* mutex protecting this data structure */
 	struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS];
-	int imr;
-	int isr;
+	bool use_second_irq;
+	u8 imr;
+	u8 isr;
+};
+
+static int twl4030_madc_read(struct iio_dev *iio_dev,
+			     const struct iio_chan_spec *chan,
+			     int *val, int *val2, long mask)
+{
+	struct twl4030_madc_data *madc = iio_priv(iio_dev);
+	struct twl4030_madc_request req;
+	int ret;
+
+	req.method = madc->use_second_irq ? TWL4030_MADC_SW2 : TWL4030_MADC_SW1;
+
+	req.channels = BIT(chan->channel);
+	req.active = false;
+	req.func_cb = NULL;
+	req.type = TWL4030_MADC_WAIT;
+	req.raw = !(mask == IIO_CHAN_INFO_PROCESSED);
+	req.do_avg = (mask == IIO_CHAN_INFO_AVERAGE_RAW);
+
+	ret = twl4030_madc_conversion(&req);
+	if (ret < 0)
+		return ret;
+
+	*val = req.rbuf[chan->channel];
+
+	return IIO_VAL_INT;
+}
+
+static const struct iio_info twl4030_madc_iio_info = {
+	.read_raw = &twl4030_madc_read,
+	.driver_module = THIS_MODULE,
+};
+
+#define TWL4030_ADC_CHANNEL(_channel, _type, _name) {	\
+	.type = _type,					\
+	.channel = _channel,				\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |  \
+			      BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \
+			      BIT(IIO_CHAN_INFO_PROCESSED), \
+	.datasheet_name = _name,			\
+	.indexed = 1,					\
+}
+
+static const struct iio_chan_spec twl4030_madc_iio_channels[] = {
+	TWL4030_ADC_CHANNEL(0, IIO_VOLTAGE, "ADCIN0"),
+	TWL4030_ADC_CHANNEL(1, IIO_TEMP, "ADCIN1"),
+	TWL4030_ADC_CHANNEL(2, IIO_VOLTAGE, "ADCIN2"),
+	TWL4030_ADC_CHANNEL(3, IIO_VOLTAGE, "ADCIN3"),
+	TWL4030_ADC_CHANNEL(4, IIO_VOLTAGE, "ADCIN4"),
+	TWL4030_ADC_CHANNEL(5, IIO_VOLTAGE, "ADCIN5"),
+	TWL4030_ADC_CHANNEL(6, IIO_VOLTAGE, "ADCIN6"),
+	TWL4030_ADC_CHANNEL(7, IIO_VOLTAGE, "ADCIN7"),
+	TWL4030_ADC_CHANNEL(8, IIO_VOLTAGE, "ADCIN8"),
+	TWL4030_ADC_CHANNEL(9, IIO_VOLTAGE, "ADCIN9"),
+	TWL4030_ADC_CHANNEL(10, IIO_CURRENT, "ADCIN10"),
+	TWL4030_ADC_CHANNEL(11, IIO_VOLTAGE, "ADCIN11"),
+	TWL4030_ADC_CHANNEL(12, IIO_VOLTAGE, "ADCIN12"),
+	TWL4030_ADC_CHANNEL(13, IIO_VOLTAGE, "ADCIN13"),
+	TWL4030_ADC_CHANNEL(14, IIO_VOLTAGE, "ADCIN14"),
+	TWL4030_ADC_CHANNEL(15, IIO_VOLTAGE, "ADCIN15"),
 };
 
 static struct twl4030_madc_data *twl4030_madc;
···
 };
 
 
-/*
- * Conversion table from -3 to 55 degree Celcius
- */
-static int therm_tbl[] = {
-30800,	29500,	28300,	27100,
-26000,	24900,	23900,	22900,	22000,	21100,	20300,	19400,	18700,	17900,
-17200,	16500,	15900,	15300,	14700,	14100,	13600,	13100,	12600,	12100,
-11600,	11200,	10800,	10400,	10000,	9630,	9280,	8950,	8620,	8310,
-8020,	7730,	7460,	7200,	6950,	6710,	6470,	6250,	6040,	5830,
-5640,	5450,	5260,	5090,	4920,	4760,	4600,	4450,	4310,	4170,
-4040,	3910,	3790,	3670,	3550
+/* Conversion table from -3 to 55 degrees Celcius */
+static int twl4030_therm_tbl[] = {
+	30800,	29500,	28300,	27100,
+	26000,	24900,	23900,	22900,	22000,	21100,	20300,	19400,	18700,
+	17900,	17200,	16500,	15900,	15300,	14700,	14100,	13600,	13100,
+	12600,	12100,	11600,	11200,	10800,	10400,	10000,	9630,	9280,
+	8950,	8620,	8310,	8020,	7730,	7460,	7200,	6950,	6710,
+	6470,	6250,	6040,	5830,	5640,	5450,	5260,	5090,	4920,
+	4760,	4600,	4450,	4310,	4170,	4040,	3910,	3790,	3670,
+	3550
 };
 
 /*
···
 			      },
 };
 
-/*
- * Function to read a particular channel value.
- * @madc - pointer to struct twl4030_madc_data
- * @reg - lsb of ADC Channel
- * If the i2c read fails it returns an error else returns 0.
+/**
+ * twl4030_madc_channel_raw_read() - Function to read a particular channel value
+ * @madc:	pointer to struct twl4030_madc_data
+ * @reg:	lsb of ADC Channel
+ *
+ * Return: 0 on success, an error code otherwise.
  */
 static int twl4030_madc_channel_raw_read(struct twl4030_madc_data *madc, u8 reg)
 {
-	u8 msb, lsb;
+	u16 val;
 	int ret;
 	/*
 	 * For each ADC channel, we have MSB and LSB register pair. MSB address
 	 * is always LSB address+1. reg parameter is the address of LSB register
 	 */
-	ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &msb, reg + 1);
+	ret = twl_i2c_read_u16(TWL4030_MODULE_MADC, &val, reg);
 	if (ret) {
-		dev_err(madc->dev, "unable to read MSB register 0x%X\n",
-			reg + 1);
-		return ret;
-	}
-	ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &lsb, reg);
-	if (ret) {
-		dev_err(madc->dev, "unable to read LSB register 0x%X\n", reg);
+		dev_err(madc->dev, "unable to read register 0x%X\n", reg);
 		return ret;
 	}
 
-	return (int)(((msb << 8) | lsb) >> 6);
+	return (int)(val >> 6);
 }
 
 /*
- * Return battery temperature
+ * Return battery temperature in degrees Celsius
  * Or < 0 on failure.
  */
 static int twl4030battery_temperature(int raw_volt)
···
 	int temp, curr, volt, res, ret;
 
 	volt = (raw_volt * TEMP_STEP_SIZE) / TEMP_PSR_R;
-	/* Getting and calculating the supply current in micro ampers */
+	/* Getting and calculating the supply current in micro amperes */
 	ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, &val,
 		REG_BCICTL2);
 	if (ret < 0)
 		return ret;
+
 	curr = ((val & TWL4030_BCI_ITHEN) + 1) * 10;
 	/* Getting and calculating the thermistor resistance in ohms */
 	res = volt * 1000 / curr;
 	/* calculating temperature */
 	for (temp = 58; temp >= 0; temp--) {
-		int actual = therm_tbl[temp];
-
+		int actual = twl4030_therm_tbl[temp];
 		if ((actual - res) >= 0)
 			break;
 	}
···
 	else /* slope of 0.88 mV/mA */
 		return (raw_volt * CURR_STEP_SIZE) / CURR_PSR_R2;
 }
+
 /*
  * Function to read channel values
  * @madc - pointer to twl4030_madc_data struct
  * @reg_base - Base address of the first channel
- * @Channels - 16 bit bitmap. If the bit is set, channel value is read
+ * @Channels - 16 bit bitmap. If the bit is set, channel's value is read
  * @buf - The channel values are stored here. if read fails error
  * @raw - Return raw values without conversion
  * value is stored
···
 				      long channels, int *buf,
 				      bool raw)
 {
-	int count = 0, count_req = 0, i;
+	int count = 0;
+	int i;
 	u8 reg;
 
 	for_each_set_bit(i, &channels, TWL4030_MADC_MAX_CHANNELS) {
-		reg = reg_base + 2 * i;
+		reg = reg_base + (2 * i);
 		buf[i] = twl4030_madc_channel_raw_read(madc, reg);
 		if (buf[i] < 0) {
-			dev_err(madc->dev,
-				"Unable to read register 0x%X\n", reg);
-			count_req++;
-			continue;
+			dev_err(madc->dev, "Unable to read register 0x%X\n",
+				reg);
+			return buf[i];
 		}
 		if (raw) {
 			count++;
···
 			buf[i] = twl4030battery_current(buf[i]);
 			if (buf[i] < 0) {
 				dev_err(madc->dev, "err reading current\n");
-				count_req++;
+				return buf[i];
 			} else {
 				count++;
 				buf[i] = buf[i] - 750;
···
 			buf[i] = twl4030battery_temperature(buf[i]);
 			if (buf[i] < 0) {
 				dev_err(madc->dev, "err reading temperature\n");
-				count_req++;
+				return buf[i];
 			} else {
 				buf[i] -= 3;
 				count++;
···
 				twl4030_divider_ratios[i].numerator);
 		}
 	}
-	if (count_req)
-		dev_err(madc->dev, "%d channel conversion failed\n", count_req);
 
 	return count;
 }
···
 			madc->imr);
 		return ret;
 	}
+
 	val &= ~(1 << id);
 	ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, val, madc->imr);
 	if (ret) {
 		dev_err(madc->dev,
 			"unable to write imr register 0x%X\n", madc->imr);
 		return ret;
-
 	}
 
 	return 0;
···
 			continue;
 		ret = twl4030_madc_disable_irq(madc, i);
 		if (ret < 0)
-			dev_dbg(madc->dev, "Disable interrupt failed%d\n", i);
+			dev_dbg(madc->dev, "Disable interrupt failed %d\n", i);
 		madc->requests[i].result_pending = 1;
 	}
 	for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
···
 {
 	const struct twl4030_madc_conversion_method *method;
 	int ret = 0;
+
+	if (conv_method != TWL4030_MADC_SW1 && conv_method != TWL4030_MADC_SW2)
+		return -ENOTSUPP;
+
 	method = &twl4030_conversion_methods[conv_method];
-	switch (conv_method) {
-	case TWL4030_MADC_SW1:
-	case TWL4030_MADC_SW2:
-		ret = twl_i2c_write_u8(TWL4030_MODULE_MADC,
-				       TWL4030_MADC_SW_START, method->ctrl);
-		if (ret) {
-			dev_err(madc->dev,
-				"unable to write ctrl register 0x%X\n",
-				method->ctrl);
-			return ret;
-		}
-		break;
-	default:
-		break;
+	ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, TWL4030_MADC_SW_START,
+			       method->ctrl);
+	if (ret) {
+		dev_err(madc->dev, "unable to write ctrl register 0x%X\n",
+			method->ctrl);
+		return ret;
 	}
 
 	return 0;
···
 int twl4030_madc_conversion(struct twl4030_madc_request *req)
 {
 	const struct twl4030_madc_conversion_method *method;
-	u8 ch_msb, ch_lsb;
 	int ret;
 
 	if (!req || !twl4030_madc)
···
 		ret = -EBUSY;
 		goto out;
 	}
-	ch_msb = (req->channels >> 8) & 0xff;
-	ch_lsb = req->channels & 0xff;
 	method = &twl4030_conversion_methods[req->method];
 	/* Select channels to be converted */
-	ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_msb, method->sel + 1);
+	ret = twl_i2c_write_u16(TWL4030_MODULE_MADC, req->channels, method->sel);
 	if (ret) {
 		dev_err(twl4030_madc->dev,
-			"unable to write sel register 0x%X\n", method->sel + 1);
-		goto out;
-	}
-	ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_lsb, method->sel);
-	if (ret) {
-		dev_err(twl4030_madc->dev,
-			"unable to write sel register 0x%X\n", method->sel + 1);
+			"unable to write sel register 0x%X\n", method->sel);
 		goto out;
 	}
 	/* Select averaging for all channels if do_avg is set */
 	if (req->do_avg) {
-		ret = twl_i2c_write_u8(TWL4030_MODULE_MADC,
-				       ch_msb, method->avg + 1);
+		ret = twl_i2c_write_u16(TWL4030_MODULE_MADC, req->channels,
+				       method->avg);
 		if (ret) {
 			dev_err(twl4030_madc->dev,
 				"unable to write avg register 0x%X\n",
-				method->avg + 1);
-			goto out;
-		}
-		ret = twl_i2c_write_u8(TWL4030_MODULE_MADC,
-				       ch_lsb, method->avg);
-		if (ret) {
-			dev_err(twl4030_madc->dev,
-				"unable to write sel reg 0x%X\n",
-				method->sel + 1);
+				method->avg);
 			goto out;
 		}
 	}
···
 }
 EXPORT_SYMBOL_GPL(twl4030_madc_conversion);
 
-/*
- * Return channel value
- * Or < 0 on failure.
- */
 int twl4030_get_madc_conversion(int channel_no)
 {
 	struct twl4030_madc_request req;
···
 }
 EXPORT_SYMBOL_GPL(twl4030_get_madc_conversion);
 
-/*
+/**
+ * twl4030_madc_set_current_generator() - setup bias current
+ *
+ * @madc:	pointer to twl4030_madc_data struct
+ * @chan:	can be one of the two values:
+ *		TWL4030_BCI_ITHEN
+ *		Enables bias current for main battery type reading
+ *		TWL4030_BCI_TYPEN
+ *		Enables bias current for main battery temperature sensing
+ * @on:		enable or disable chan.
+ *
  * Function to enable or disable bias current for
  * main battery type reading or temperature sensing
- * @madc - pointer to twl4030_madc_data struct
- * @chan - can be one of the two values
- * TWL4030_BCI_ITHEN - Enables bias current for main battery type reading
- * TWL4030_BCI_TYPEN - Enables bias current for main battery temperature
- * sensing
- * @on - enable or disable chan.
  */
 static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc,
 					      int chan, int on)
 {
 	int ret;
+	int regmask;
 	u8 regval;
 
 	ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE,
···
 			TWL4030_BCI_BCICTL1);
 		return ret;
 	}
+
+	regmask = chan ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN;
 	if (on)
-		regval |= chan ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN;
+		regval |= regmask;
 	else
-		regval &= chan ? ~TWL4030_BCI_ITHEN : ~TWL4030_BCI_TYPEN;
+		regval &= ~regmask;
+
 	ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
 			       regval, TWL4030_BCI_BCICTL1);
 	if (ret) {
···
 /*
  * Function that sets MADC software power on bit to enable MADC
  * @madc - pointer to twl4030_madc_data struct
- * @on - Enable or disable MADC software powen on bit.
+ * @on - Enable or disable MADC software power on bit.
  * returns error if i2c read/write fails else 0
  */
 static int twl4030_madc_set_power(struct twl4030_madc_data *madc, int on)
···
 {
 	struct twl4030_madc_data *madc;
 	struct twl4030_madc_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	int ret;
+	struct device_node *np = pdev->dev.of_node;
+	int irq, ret;
 	u8 regval;
+	struct iio_dev *iio_dev = NULL;
 
-	if (!pdata) {
-		dev_err(&pdev->dev, "platform_data not available\n");
+	if (!pdata && !np) {
+		dev_err(&pdev->dev, "neither platform data nor Device Tree node available\n");
 		return -EINVAL;
 	}
-	madc = kzalloc(sizeof(*madc), GFP_KERNEL);
-	if (!madc)
-		return -ENOMEM;
 
+	iio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*madc));
+	if (!iio_dev) {
+		dev_err(&pdev->dev, "failed allocating iio device\n");
+		return -ENOMEM;
+	}
+
+	madc = iio_priv(iio_dev);
 	madc->dev = &pdev->dev;
+
+	iio_dev->name = dev_name(&pdev->dev);
+	iio_dev->dev.parent = &pdev->dev;
+	iio_dev->dev.of_node = pdev->dev.of_node;
+	iio_dev->info = &twl4030_madc_iio_info;
+	iio_dev->modes = INDIO_DIRECT_MODE;
+	iio_dev->channels = twl4030_madc_iio_channels;
+	iio_dev->num_channels = ARRAY_SIZE(twl4030_madc_iio_channels);
 
 	/*
 	 * Phoenix provides 2 interrupt lines. The first one is connected to
 	 * the OMAP. The other one can be connected to the other processor such
 	 * as modem. Hence two separate ISR and IMR registers.
 	 */
-	madc->imr = (pdata->irq_line == 1) ?
-	    TWL4030_MADC_IMR1 : TWL4030_MADC_IMR2;
-	madc->isr = (pdata->irq_line == 1) ?
-	    TWL4030_MADC_ISR1 : TWL4030_MADC_ISR2;
+	if (pdata)
+		madc->use_second_irq = (pdata->irq_line != 1);
+	else
+		madc->use_second_irq = of_property_read_bool(np,
+				       "ti,system-uses-second-madc-irq");
+
+	madc->imr = madc->use_second_irq ? TWL4030_MADC_IMR2 :
+					   TWL4030_MADC_IMR1;
+	madc->isr = madc->use_second_irq ? TWL4030_MADC_ISR2 :
+					   TWL4030_MADC_ISR1;
+
 	ret = twl4030_madc_set_power(madc, 1);
 	if (ret < 0)
-		goto err_power;
+		return ret;
 	ret = twl4030_madc_set_current_generator(madc, 0, 1);
 	if (ret < 0)
 		goto err_current_generator;
···
 		}
 	}
 
-	platform_set_drvdata(pdev, madc);
+	platform_set_drvdata(pdev, iio_dev);
 	mutex_init(&madc->lock);
-	ret = request_threaded_irq(platform_get_irq(pdev, 0), NULL,
+
+	irq = platform_get_irq(pdev, 0);
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 				   twl4030_madc_threaded_irq_handler,
 				   IRQF_TRIGGER_RISING, "twl4030_madc", madc);
 	if (ret) {
-		dev_dbg(&pdev->dev, "could not request irq\n");
+		dev_err(&pdev->dev, "could not request irq\n");
 		goto err_i2c;
 	}
 	twl4030_madc = madc;
+
+	ret = iio_device_register(iio_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "could not register iio device\n");
+		goto err_i2c;
+	}
+
 	return 0;
+
 err_i2c:
 	twl4030_madc_set_current_generator(madc, 0, 0);
 err_current_generator:
 	twl4030_madc_set_power(madc, 0);
-err_power:
-	kfree(madc);
-
 	return ret;
 }
 
 static int twl4030_madc_remove(struct platform_device *pdev)
 {
-	struct twl4030_madc_data *madc = platform_get_drvdata(pdev);
+	struct iio_dev *iio_dev = platform_get_drvdata(pdev);
+	struct twl4030_madc_data *madc = iio_priv(iio_dev);
 
-	free_irq(platform_get_irq(pdev, 0), madc);
+	iio_device_unregister(iio_dev);
+
 	twl4030_madc_set_current_generator(madc, 0, 0);
 	twl4030_madc_set_power(madc, 0);
-	kfree(madc);
 
 	return 0;
 }
+
+#ifdef CONFIG_OF
+static const struct of_device_id twl_madc_of_match[] = {
+	{ .compatible = "ti,twl4030-madc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, twl_madc_of_match);
+#endif
 
 static struct platform_driver twl4030_madc_driver = {
 	.probe = twl4030_madc_probe,
···
 	.driver = {
 		   .name = "twl4030_madc",
 		   .owner = THIS_MODULE,
-		   },
+		   .of_match_table = of_match_ptr(twl_madc_of_match),
+	},
 };
 
 module_platform_driver(twl4030_madc_driver);

drivers/mfd/twl6030-irq.c

···
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
-#include <linux/init.h>
 #include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>

drivers/mfd/twl6040.c

···
 	init_completion(&twl6040->ready);
 
 	twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
+	if (twl6040->rev < 0) {
+		dev_err(&client->dev, "Failed to read revision register: %d\n",
+			twl6040->rev);
+		goto gpio_err;
+	}
 
 	/* ERRATA: Automatic power-up is not possible in ES1.0 */
 	if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
···
 	}
 
 	/* dual-access registers controlled by I2C only */
-	twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL);
 	regmap_register_patch(twl6040->regmap, twl6040_patch,
 			      ARRAY_SIZE(twl6040_patch));
 

drivers/mfd/ucb1x00-core.c

···
 }
 #endif
 
-static const struct dev_pm_ops ucb1x00_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(ucb1x00_suspend, ucb1x00_resume)
-};
+static SIMPLE_DEV_PM_OPS(ucb1x00_pm_ops, ucb1x00_suspend, ucb1x00_resume);
 
 static struct mcp_driver ucb1x00_driver = {
 	.drv		= {

drivers/mfd/vexpress-config.c

···
 #include <linux/bitops.h>
 #include <linux/completion.h>
 #include <linux/export.h>
-#include <linux/init.h>
 #include <linux/list.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
···
 
 #define VEXPRESS_CONFIG_MAX_BRIDGES 2
 
-struct vexpress_config_bridge {
+static struct vexpress_config_bridge {
 	struct device_node *node;
 	struct vexpress_config_bridge_info *info;
 	struct list_head transactions;

drivers/mfd/vexpress-sysreg.c

···
 		struct device_node *node)
 {
 	struct vexpress_sysreg_config_func *config_func;
-	u32 site;
+	u32 site = 0;
 	u32 position = 0;
 	u32 dcc = 0;
 	u32 func_device[2];

drivers/mfd/wm5102-tables.c

···
 	{ 0x171, 0x0000 },
 	{ 0x35E, 0x000C },
 	{ 0x2D4, 0x0000 },
+	{ 0x4DC, 0x0900 },
 	{ 0x80, 0x0000 },
 };
 
···
 	case ARIZONA_DSP1_STATUS_1:
 	case ARIZONA_DSP1_STATUS_2:
 	case ARIZONA_DSP1_STATUS_3:
+	case ARIZONA_DSP1_WDMA_BUFFER_1:
+	case ARIZONA_DSP1_WDMA_BUFFER_2:
+	case ARIZONA_DSP1_WDMA_BUFFER_3:
+	case ARIZONA_DSP1_WDMA_BUFFER_4:
+	case ARIZONA_DSP1_WDMA_BUFFER_5:
+	case ARIZONA_DSP1_WDMA_BUFFER_6:
+	case ARIZONA_DSP1_WDMA_BUFFER_7:
+	case ARIZONA_DSP1_WDMA_BUFFER_8:
+	case ARIZONA_DSP1_RDMA_BUFFER_1:
+	case ARIZONA_DSP1_RDMA_BUFFER_2:
+	case ARIZONA_DSP1_RDMA_BUFFER_3:
+	case ARIZONA_DSP1_RDMA_BUFFER_4:
+	case ARIZONA_DSP1_RDMA_BUFFER_5:
+	case ARIZONA_DSP1_RDMA_BUFFER_6:
+	case ARIZONA_DSP1_WDMA_CONFIG_1:
+	case ARIZONA_DSP1_WDMA_CONFIG_2:
+	case ARIZONA_DSP1_RDMA_CONFIG_1:
 	case ARIZONA_DSP1_SCRATCH_0:
 	case ARIZONA_DSP1_SCRATCH_1:
 	case ARIZONA_DSP1_SCRATCH_2:
···
 	case ARIZONA_AOD_IRQ1:
 	case ARIZONA_AOD_IRQ2:
 	case ARIZONA_AOD_IRQ_RAW_STATUS:
+	case ARIZONA_DSP1_CLOCKING_1:
 	case ARIZONA_DSP1_STATUS_1:
 	case ARIZONA_DSP1_STATUS_2:
 	case ARIZONA_DSP1_STATUS_3:
+	case ARIZONA_DSP1_WDMA_BUFFER_1:
+	case ARIZONA_DSP1_WDMA_BUFFER_2:
+	case ARIZONA_DSP1_WDMA_BUFFER_3:
+	case ARIZONA_DSP1_WDMA_BUFFER_4:
+	case ARIZONA_DSP1_WDMA_BUFFER_5:
+	case ARIZONA_DSP1_WDMA_BUFFER_6:
+	case ARIZONA_DSP1_WDMA_BUFFER_7:
+	case ARIZONA_DSP1_WDMA_BUFFER_8:
+	case ARIZONA_DSP1_RDMA_BUFFER_1:
+	case ARIZONA_DSP1_RDMA_BUFFER_2:
+	case ARIZONA_DSP1_RDMA_BUFFER_3:
+	case ARIZONA_DSP1_RDMA_BUFFER_4:
+	case ARIZONA_DSP1_RDMA_BUFFER_5:
+	case ARIZONA_DSP1_RDMA_BUFFER_6:
+	case ARIZONA_DSP1_WDMA_CONFIG_1:
+	case ARIZONA_DSP1_WDMA_CONFIG_2:
+	case ARIZONA_DSP1_RDMA_CONFIG_1:
 	case ARIZONA_DSP1_SCRATCH_0:
 	case ARIZONA_DSP1_SCRATCH_1:
 	case ARIZONA_DSP1_SCRATCH_2:

drivers/mfd/wm5110-tables.c

···
 	{ 0x00000219, 0x01A6 },    /* R537   - Mic Bias Ctrl 2 */
 	{ 0x0000021A, 0x01A6 },    /* R538   - Mic Bias Ctrl 3 */
 	{ 0x00000293, 0x0000 },    /* R659   - Accessory Detect Mode 1 */
-	{ 0x0000029B, 0x0020 },    /* R667   - Headphone Detect 1 */
+	{ 0x0000029B, 0x0028 },    /* R667   - Headphone Detect 1 */
 	{ 0x0000029C, 0x0000 },    /* R668   - Headphone Detect 2 */
 	{ 0x000002A2, 0x0000 },    /* R674   - Micd clamp control */
 	{ 0x000002A3, 0x1102 },    /* R675   - Mic Detect 1 */
···
 	case ARIZONA_DSP1_STATUS_1:
 	case ARIZONA_DSP1_STATUS_2:
 	case ARIZONA_DSP1_STATUS_3:
+	case ARIZONA_DSP1_STATUS_4:
+	case ARIZONA_DSP1_WDMA_BUFFER_1:
+	case ARIZONA_DSP1_WDMA_BUFFER_2:
+	case ARIZONA_DSP1_WDMA_BUFFER_3:
+	case ARIZONA_DSP1_WDMA_BUFFER_4:
+	case ARIZONA_DSP1_WDMA_BUFFER_5:
+	case ARIZONA_DSP1_WDMA_BUFFER_6:
+	case ARIZONA_DSP1_WDMA_BUFFER_7:
+	case ARIZONA_DSP1_WDMA_BUFFER_8:
+	case ARIZONA_DSP1_RDMA_BUFFER_1:
+	case ARIZONA_DSP1_RDMA_BUFFER_2:
+	case ARIZONA_DSP1_RDMA_BUFFER_3:
+	case ARIZONA_DSP1_RDMA_BUFFER_4:
+	case ARIZONA_DSP1_RDMA_BUFFER_5:
+	case ARIZONA_DSP1_RDMA_BUFFER_6:
+	case ARIZONA_DSP1_WDMA_CONFIG_1:
+	case ARIZONA_DSP1_WDMA_CONFIG_2:
+	case ARIZONA_DSP1_WDMA_OFFSET_1:
+	case ARIZONA_DSP1_RDMA_CONFIG_1:
+	case ARIZONA_DSP1_RDMA_OFFSET_1:
+	case ARIZONA_DSP1_EXTERNAL_START_SELECT_1:
 	case ARIZONA_DSP1_SCRATCH_0:
 	case ARIZONA_DSP1_SCRATCH_1:
 	case ARIZONA_DSP1_SCRATCH_2:
···
 	case ARIZONA_DSP2_STATUS_1:
 	case ARIZONA_DSP2_STATUS_2:
 	case ARIZONA_DSP2_STATUS_3:
+	case ARIZONA_DSP2_STATUS_4:
+	case ARIZONA_DSP2_WDMA_BUFFER_1:
+	case ARIZONA_DSP2_WDMA_BUFFER_2:
+	case ARIZONA_DSP2_WDMA_BUFFER_3:
+	case ARIZONA_DSP2_WDMA_BUFFER_4:
+	case ARIZONA_DSP2_WDMA_BUFFER_5:
+	case ARIZONA_DSP2_WDMA_BUFFER_6:
+	case ARIZONA_DSP2_WDMA_BUFFER_7:
+	case ARIZONA_DSP2_WDMA_BUFFER_8:
+	case ARIZONA_DSP2_RDMA_BUFFER_1:
+	case ARIZONA_DSP2_RDMA_BUFFER_2:
+	case ARIZONA_DSP2_RDMA_BUFFER_3:
+	case ARIZONA_DSP2_RDMA_BUFFER_4:
+	case ARIZONA_DSP2_RDMA_BUFFER_5:
+	case ARIZONA_DSP2_RDMA_BUFFER_6:
+	case ARIZONA_DSP2_WDMA_CONFIG_1:
+	case ARIZONA_DSP2_WDMA_CONFIG_2:
+	case ARIZONA_DSP2_WDMA_OFFSET_1:
+	case ARIZONA_DSP2_RDMA_CONFIG_1:
+	case ARIZONA_DSP2_RDMA_OFFSET_1:
+	case ARIZONA_DSP2_EXTERNAL_START_SELECT_1:
 	case ARIZONA_DSP2_SCRATCH_0:
 	case ARIZONA_DSP2_SCRATCH_1:
 	case ARIZONA_DSP2_SCRATCH_2:
···
 	case ARIZONA_DSP3_STATUS_1:
 	case ARIZONA_DSP3_STATUS_2:
 	case ARIZONA_DSP3_STATUS_3:
+	case ARIZONA_DSP3_STATUS_4:
+	case ARIZONA_DSP3_WDMA_BUFFER_1:
+	case ARIZONA_DSP3_WDMA_BUFFER_2:
+	case ARIZONA_DSP3_WDMA_BUFFER_3:
+	case ARIZONA_DSP3_WDMA_BUFFER_4:
+	case ARIZONA_DSP3_WDMA_BUFFER_5:
+	case ARIZONA_DSP3_WDMA_BUFFER_6:
+	case ARIZONA_DSP3_WDMA_BUFFER_7:
+	case ARIZONA_DSP3_WDMA_BUFFER_8:
+	case ARIZONA_DSP3_RDMA_BUFFER_1:
+	case ARIZONA_DSP3_RDMA_BUFFER_2:
+	case ARIZONA_DSP3_RDMA_BUFFER_3:
+	case ARIZONA_DSP3_RDMA_BUFFER_4:
+	case ARIZONA_DSP3_RDMA_BUFFER_5:
+	case ARIZONA_DSP3_RDMA_BUFFER_6:
+	case ARIZONA_DSP3_WDMA_CONFIG_1:
+	case ARIZONA_DSP3_WDMA_CONFIG_2:
+	case ARIZONA_DSP3_WDMA_OFFSET_1:
+	case ARIZONA_DSP3_RDMA_CONFIG_1:
+	case ARIZONA_DSP3_RDMA_OFFSET_1:
+	case ARIZONA_DSP3_EXTERNAL_START_SELECT_1:
 	case ARIZONA_DSP3_SCRATCH_0:
 	case ARIZONA_DSP3_SCRATCH_1:
 	case ARIZONA_DSP3_SCRATCH_2:
···
 	case ARIZONA_DSP4_STATUS_1:
 	case ARIZONA_DSP4_STATUS_2:
 	case ARIZONA_DSP4_STATUS_3:
+	case ARIZONA_DSP4_STATUS_4:
+	case ARIZONA_DSP4_WDMA_BUFFER_1:
+	case ARIZONA_DSP4_WDMA_BUFFER_2:
+	case ARIZONA_DSP4_WDMA_BUFFER_3:
+	case ARIZONA_DSP4_WDMA_BUFFER_4:
+	case ARIZONA_DSP4_WDMA_BUFFER_5:
+	case ARIZONA_DSP4_WDMA_BUFFER_6:
+	case ARIZONA_DSP4_WDMA_BUFFER_7:
+	case ARIZONA_DSP4_WDMA_BUFFER_8:
+	case ARIZONA_DSP4_RDMA_BUFFER_1:
+	case ARIZONA_DSP4_RDMA_BUFFER_2:
+	case ARIZONA_DSP4_RDMA_BUFFER_3:
+	case ARIZONA_DSP4_RDMA_BUFFER_4:
+	case ARIZONA_DSP4_RDMA_BUFFER_5:
+	case ARIZONA_DSP4_RDMA_BUFFER_6:
+	case ARIZONA_DSP4_WDMA_CONFIG_1:
+	case ARIZONA_DSP4_WDMA_CONFIG_2:
+	case ARIZONA_DSP4_WDMA_OFFSET_1:
+	case ARIZONA_DSP4_RDMA_CONFIG_1:
+	case ARIZONA_DSP4_RDMA_OFFSET_1:
+	case ARIZONA_DSP4_EXTERNAL_START_SELECT_1:
 	case ARIZONA_DSP4_SCRATCH_0:
 	case ARIZONA_DSP4_SCRATCH_1:
 	case ARIZONA_DSP4_SCRATCH_2:
···
 	case ARIZONA_DSP1_STATUS_1:
 	case ARIZONA_DSP1_STATUS_2:
 	case ARIZONA_DSP1_STATUS_3:
+	case ARIZONA_DSP1_STATUS_4:
+	case ARIZONA_DSP1_WDMA_BUFFER_1:
+	case ARIZONA_DSP1_WDMA_BUFFER_2:
+	case ARIZONA_DSP1_WDMA_BUFFER_3:
+	case ARIZONA_DSP1_WDMA_BUFFER_4:
+	case ARIZONA_DSP1_WDMA_BUFFER_5:
+	case ARIZONA_DSP1_WDMA_BUFFER_6:
+	case ARIZONA_DSP1_WDMA_BUFFER_7:
+	case ARIZONA_DSP1_WDMA_BUFFER_8:
+	case ARIZONA_DSP1_RDMA_BUFFER_1:
+	case ARIZONA_DSP1_RDMA_BUFFER_2:
+	case ARIZONA_DSP1_RDMA_BUFFER_3:
+	case ARIZONA_DSP1_RDMA_BUFFER_4:
+	case ARIZONA_DSP1_RDMA_BUFFER_5:
+	case ARIZONA_DSP1_RDMA_BUFFER_6:
+	case ARIZONA_DSP1_WDMA_CONFIG_1:
+	case ARIZONA_DSP1_WDMA_CONFIG_2:
+	case ARIZONA_DSP1_WDMA_OFFSET_1:
+	case ARIZONA_DSP1_RDMA_CONFIG_1:
+	case ARIZONA_DSP1_RDMA_OFFSET_1:
+	case ARIZONA_DSP1_EXTERNAL_START_SELECT_1:
 	case ARIZONA_DSP1_SCRATCH_0:
 	case ARIZONA_DSP1_SCRATCH_1:
 	case ARIZONA_DSP1_SCRATCH_2:
 	case ARIZONA_DSP1_SCRATCH_3:
+	case ARIZONA_DSP1_CLOCKING_1:
 	case ARIZONA_DSP2_STATUS_1:
 	case ARIZONA_DSP2_STATUS_2:
 	case ARIZONA_DSP2_STATUS_3:
+	case ARIZONA_DSP2_STATUS_4:
+	case ARIZONA_DSP2_WDMA_BUFFER_1:
+	case ARIZONA_DSP2_WDMA_BUFFER_2:
+	case ARIZONA_DSP2_WDMA_BUFFER_3:
+	case ARIZONA_DSP2_WDMA_BUFFER_4:
+	case ARIZONA_DSP2_WDMA_BUFFER_5:
+	case ARIZONA_DSP2_WDMA_BUFFER_6:
+	case ARIZONA_DSP2_WDMA_BUFFER_7:
+	case ARIZONA_DSP2_WDMA_BUFFER_8:
+	case ARIZONA_DSP2_RDMA_BUFFER_1:
+	case ARIZONA_DSP2_RDMA_BUFFER_2:
+	case ARIZONA_DSP2_RDMA_BUFFER_3:
+	case ARIZONA_DSP2_RDMA_BUFFER_4:
+	case ARIZONA_DSP2_RDMA_BUFFER_5:
+	case ARIZONA_DSP2_RDMA_BUFFER_6:
+	case ARIZONA_DSP2_WDMA_CONFIG_1:
+	case ARIZONA_DSP2_WDMA_CONFIG_2:
+	case ARIZONA_DSP2_WDMA_OFFSET_1:
+	case ARIZONA_DSP2_RDMA_CONFIG_1:
+	case ARIZONA_DSP2_RDMA_OFFSET_1:
+	case ARIZONA_DSP2_EXTERNAL_START_SELECT_1:
 	case ARIZONA_DSP2_SCRATCH_0:
 	case ARIZONA_DSP2_SCRATCH_1:
 	case ARIZONA_DSP2_SCRATCH_2:
 	case ARIZONA_DSP2_SCRATCH_3:
+	case ARIZONA_DSP2_CLOCKING_1:
 	case ARIZONA_DSP3_STATUS_1:
 	case ARIZONA_DSP3_STATUS_2:
 	case ARIZONA_DSP3_STATUS_3:
+	case ARIZONA_DSP3_STATUS_4:
+	case ARIZONA_DSP3_WDMA_BUFFER_1:
+	case ARIZONA_DSP3_WDMA_BUFFER_2:
+	case ARIZONA_DSP3_WDMA_BUFFER_3:
+	case ARIZONA_DSP3_WDMA_BUFFER_4:
+	case ARIZONA_DSP3_WDMA_BUFFER_5:
+	case ARIZONA_DSP3_WDMA_BUFFER_6:
+	case ARIZONA_DSP3_WDMA_BUFFER_7:
+	case ARIZONA_DSP3_WDMA_BUFFER_8:
+	case ARIZONA_DSP3_RDMA_BUFFER_1:
+	case ARIZONA_DSP3_RDMA_BUFFER_2:
+	case ARIZONA_DSP3_RDMA_BUFFER_3:
+	case ARIZONA_DSP3_RDMA_BUFFER_4:
+	case ARIZONA_DSP3_RDMA_BUFFER_5:
+	case ARIZONA_DSP3_RDMA_BUFFER_6:
+	case ARIZONA_DSP3_WDMA_CONFIG_1:
+	case ARIZONA_DSP3_WDMA_CONFIG_2:
+	case ARIZONA_DSP3_WDMA_OFFSET_1:
+	case ARIZONA_DSP3_RDMA_CONFIG_1:
+	case ARIZONA_DSP3_RDMA_OFFSET_1:
+	case ARIZONA_DSP3_EXTERNAL_START_SELECT_1:
 	case ARIZONA_DSP3_SCRATCH_0:
 	case ARIZONA_DSP3_SCRATCH_1:
 	case ARIZONA_DSP3_SCRATCH_2:
 	case ARIZONA_DSP3_SCRATCH_3:
+	case ARIZONA_DSP3_CLOCKING_1:
 	case ARIZONA_DSP4_STATUS_1:
 	case ARIZONA_DSP4_STATUS_2:
 	case ARIZONA_DSP4_STATUS_3:
+	case ARIZONA_DSP4_STATUS_4:
+	case ARIZONA_DSP4_WDMA_BUFFER_1:
+	case ARIZONA_DSP4_WDMA_BUFFER_2:
+	case ARIZONA_DSP4_WDMA_BUFFER_3:
+	case ARIZONA_DSP4_WDMA_BUFFER_4:
+	case ARIZONA_DSP4_WDMA_BUFFER_5:
+	case ARIZONA_DSP4_WDMA_BUFFER_6:
+	case ARIZONA_DSP4_WDMA_BUFFER_7:
+	case ARIZONA_DSP4_WDMA_BUFFER_8:
+	case ARIZONA_DSP4_RDMA_BUFFER_1:
+	case ARIZONA_DSP4_RDMA_BUFFER_2:
+	case ARIZONA_DSP4_RDMA_BUFFER_3:
+	case ARIZONA_DSP4_RDMA_BUFFER_4:
+	case ARIZONA_DSP4_RDMA_BUFFER_5:
+	case ARIZONA_DSP4_RDMA_BUFFER_6:
+	case ARIZONA_DSP4_WDMA_CONFIG_1:
+	case ARIZONA_DSP4_WDMA_CONFIG_2:
+	case ARIZONA_DSP4_WDMA_OFFSET_1:
+	case ARIZONA_DSP4_RDMA_CONFIG_1:
+	case ARIZONA_DSP4_RDMA_OFFSET_1:
+	case ARIZONA_DSP4_EXTERNAL_START_SELECT_1:
 	case ARIZONA_DSP4_SCRATCH_0:
 	case ARIZONA_DSP4_SCRATCH_1:
 	case ARIZONA_DSP4_SCRATCH_2:
 	case ARIZONA_DSP4_SCRATCH_3:
+	case ARIZONA_DSP4_CLOCKING_1:
 		return true;
 	default:
 		return wm5110_is_adsp_memory(dev, reg);

drivers/mfd/wm8350-core.c

···
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/bug.h>
 #include <linux/device.h>

drivers/mfd/wm8350-irq.c

···
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/bug.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>

drivers/mfd/wm8400-core.c

···
 			    const struct i2c_device_id *id)
 {
 	struct wm8400 *wm8400;
-	int ret;
 
 	wm8400 = devm_kzalloc(&i2c->dev, sizeof(struct wm8400), GFP_KERNEL);
-	if (wm8400 == NULL) {
-		ret = -ENOMEM;
-		goto err;
-	}
+	if (!wm8400)
+		return -ENOMEM;
 
 	wm8400->regmap = devm_regmap_init_i2c(i2c, &wm8400_regmap_config);
-	if (IS_ERR(wm8400->regmap)) {
-		ret = PTR_ERR(wm8400->regmap);
-		goto err;
-	}
+	if (IS_ERR(wm8400->regmap))
+		return PTR_ERR(wm8400->regmap);
 
 	wm8400->dev = &i2c->dev;
 	i2c_set_clientdata(i2c, wm8400);
 
-	ret = wm8400_init(wm8400, dev_get_platdata(&i2c->dev));
-	if (ret != 0)
-		goto err;
-
-	return 0;
-
-err:
-	return ret;
+	return wm8400_init(wm8400, dev_get_platdata(&i2c->dev));
 }
 
 static int wm8400_i2c_remove(struct i2c_client *i2c)

drivers/watchdog/iTCO_wdt.c

···
 
 /* Module and version information */
 #define DRV_NAME	"iTCO_wdt"
-#define DRV_VERSION	"1.10"
+#define DRV_VERSION	"1.11"
 
 /* Includes */
 #include <linux/module.h>		/* For module specific items */
···
 	unsigned int iTCO_version;
 	struct resource *tco_res;
 	struct resource *smi_res;
-	struct resource *gcs_res;
-	/* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2)*/
-	unsigned long __iomem *gcs;
+	/*
+	 * NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2),
+	 * or memory-mapped PMC register bit 4 (TCO version 3).
+	 */
+	struct resource *gcs_pmc_res;
+	unsigned long __iomem *gcs_pmc;
 	/* the lock for io operations */
 	spinlock_t io_lock;
 	struct platform_device *dev;
···
  * Some TCO specific functions
  */
 
-static inline unsigned int seconds_to_ticks(int seconds)
+/*
+ * The iTCO v1 and v2's internal timer is stored as ticks which decrement
+ * every 0.6 seconds.  v3's internal timer is stored as seconds (some
+ * datasheets incorrectly state 0.6 seconds).
+ */
+static inline unsigned int seconds_to_ticks(int secs)
 {
-	/* the internal timer is stored as ticks which decrement
-	 * every 0.6 seconds */
-	return (seconds * 10) / 6;
+	return iTCO_wdt_private.iTCO_version == 3 ? secs : (secs * 10) / 6;
+}
+
+static inline unsigned int ticks_to_seconds(int ticks)
+{
+	return iTCO_wdt_private.iTCO_version == 3 ? ticks : (ticks * 6) / 10;
 }
 
 static void iTCO_wdt_set_NO_REBOOT_bit(void)
···
 	u32 val32;
 
 	/* Set the NO_REBOOT bit: this disables reboots */
-	if (iTCO_wdt_private.iTCO_version == 2) {
-		val32 = readl(iTCO_wdt_private.gcs);
+	if (iTCO_wdt_private.iTCO_version == 3) {
+		val32 = readl(iTCO_wdt_private.gcs_pmc);
+		val32 |= 0x00000010;
+		writel(val32, iTCO_wdt_private.gcs_pmc);
+	} else if (iTCO_wdt_private.iTCO_version == 2) {
+		val32 = readl(iTCO_wdt_private.gcs_pmc);
 		val32 |= 0x00000020;
-		writel(val32, iTCO_wdt_private.gcs);
+		writel(val32, iTCO_wdt_private.gcs_pmc);
 	} else if (iTCO_wdt_private.iTCO_version == 1) {
 		pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
 		val32 |= 0x00000002;
···
 	u32 val32;
 
 	/* Unset the NO_REBOOT bit: this enables reboots */
-	if (iTCO_wdt_private.iTCO_version == 2) {
-		val32 = readl(iTCO_wdt_private.gcs);
-		val32 &= 0xffffffdf;
-		writel(val32, iTCO_wdt_private.gcs);
+	if (iTCO_wdt_private.iTCO_version == 3) {
+		val32 = readl(iTCO_wdt_private.gcs_pmc);
+		val32 &= 0xffffffef;
+		writel(val32, iTCO_wdt_private.gcs_pmc);
 
-		val32 = readl(iTCO_wdt_private.gcs);
+		val32 = readl(iTCO_wdt_private.gcs_pmc);
+		if (val32 & 0x00000010)
+			ret = -EIO;
+	} else if (iTCO_wdt_private.iTCO_version == 2) {
+		val32 = readl(iTCO_wdt_private.gcs_pmc);
+		val32 &= 0xffffffdf;
+		writel(val32, iTCO_wdt_private.gcs_pmc);
+
+		val32 = readl(iTCO_wdt_private.gcs_pmc);
 		if (val32 & 0x00000020)
 			ret = -EIO;
 	} else if (iTCO_wdt_private.iTCO_version == 1) {
···
 
 	/* Force the timer to its reload value by writing to the TCO_RLD
 	   register */
-	if (iTCO_wdt_private.iTCO_version == 2)
+	if (iTCO_wdt_private.iTCO_version >= 2)
 		outw(0x01, TCO_RLD);
 	else if (iTCO_wdt_private.iTCO_version == 1)
 		outb(0x01, TCO_RLD);
···
 	iTCO_vendor_pre_keepalive(iTCO_wdt_private.smi_res, wd_dev->timeout);
 
 	/* Reload the timer by writing to the TCO Timer Counter register */
-	if (iTCO_wdt_private.iTCO_version == 2)
+	if (iTCO_wdt_private.iTCO_version >= 2) {
 		outw(0x01, TCO_RLD);
-	else if (iTCO_wdt_private.iTCO_version == 1) {
+	} else if (iTCO_wdt_private.iTCO_version == 1) {
 		/* Reset the timeout status bit so that the timer
 		 * needs to count down twice again before rebooting */
 		outw(0x0008, TCO1_STS);	/* write 1 to clear bit */
···
 	/* "Values of 0h-3h are ignored and should not be attempted" */
 	if (tmrval < 0x04)
 		return -EINVAL;
-	if (((iTCO_wdt_private.iTCO_version == 2) && (tmrval > 0x3ff)) ||
+	if (((iTCO_wdt_private.iTCO_version >= 2) && (tmrval > 0x3ff)) ||
 	    ((iTCO_wdt_private.iTCO_version == 1) && (tmrval > 0x03f)))
 		return -EINVAL;
 
 	iTCO_vendor_pre_set_heartbeat(tmrval);
 
 	/* Write new heartbeat to watchdog */
-	if (iTCO_wdt_private.iTCO_version == 2) {
+	if (iTCO_wdt_private.iTCO_version >= 2) {
 		spin_lock(&iTCO_wdt_private.io_lock);
 		val16 = inw(TCOv2_TMR);
 		val16 &= 0xfc00;
···
 	unsigned int time_left = 0;
 
 	/* read the TCO Timer */
-	if (iTCO_wdt_private.iTCO_version == 2) {
+	if (iTCO_wdt_private.iTCO_version >= 2) {
 		spin_lock(&iTCO_wdt_private.io_lock);
 		val16 = inw(TCO_RLD);
 		val16 &= 0x3ff;
 		spin_unlock(&iTCO_wdt_private.io_lock);
 
-		time_left = (val16 * 6) / 10;
+		time_left = ticks_to_seconds(val16);
 	} else if (iTCO_wdt_private.iTCO_version == 1) {
 		spin_lock(&iTCO_wdt_private.io_lock);
 		val8 = inb(TCO_RLD);
···
 			val8 += (inb(TCOv1_TMR) & 0x3f);
 		spin_unlock(&iTCO_wdt_private.io_lock);
 
-		time_left = (val8 * 6) / 10;
+		time_left = ticks_to_seconds(val8);
 	}
 	return time_left;
 }
···
 			resource_size(iTCO_wdt_private.tco_res));
 	release_region(iTCO_wdt_private.smi_res->start,
 			resource_size(iTCO_wdt_private.smi_res));
-	if (iTCO_wdt_private.iTCO_version == 2) {
-		iounmap(iTCO_wdt_private.gcs);
-		release_mem_region(iTCO_wdt_private.gcs_res->start,
-				resource_size(iTCO_wdt_private.gcs_res));
+	if (iTCO_wdt_private.iTCO_version >= 2) {
+		iounmap(iTCO_wdt_private.gcs_pmc);
+		release_mem_region(iTCO_wdt_private.gcs_pmc_res->start,
+				resource_size(iTCO_wdt_private.gcs_pmc_res));
 	}
 
 	iTCO_wdt_private.tco_res = NULL;
 	iTCO_wdt_private.smi_res = NULL;
-	iTCO_wdt_private.gcs_res = NULL;
-	iTCO_wdt_private.gcs = NULL;
+	iTCO_wdt_private.gcs_pmc_res = NULL;
+	iTCO_wdt_private.gcs_pmc = NULL;
 }
 
 static int iTCO_wdt_probe(struct platform_device *dev)
···
 	iTCO_wdt_private.pdev = to_pci_dev(dev->dev.parent);
 
 	/*
-	 * Get the Memory-Mapped GCS register, we need it for the
-	 * NO_REBOOT flag (TCO v2).
+	 * Get the Memory-Mapped GCS or PMC register, we need it for the
+	 * NO_REBOOT flag (TCO v2 and v3).
 	 */
-	if (iTCO_wdt_private.iTCO_version == 2) {
-		iTCO_wdt_private.gcs_res = platform_get_resource(dev,
+	if (iTCO_wdt_private.iTCO_version >= 2) {
+		iTCO_wdt_private.gcs_pmc_res = platform_get_resource(dev,
 							IORESOURCE_MEM,
-							ICH_RES_MEM_GCS);
+							ICH_RES_MEM_GCS_PMC);
 
-		if (!iTCO_wdt_private.gcs_res)
+		if (!iTCO_wdt_private.gcs_pmc_res)
 			goto out;
 
-		if (!request_mem_region(iTCO_wdt_private.gcs_res->start,
-			resource_size(iTCO_wdt_private.gcs_res), dev->name)) {
+		if (!request_mem_region(iTCO_wdt_private.gcs_pmc_res->start,
+			resource_size(iTCO_wdt_private.gcs_pmc_res), dev->name)) {
 			ret = -EBUSY;
 			goto out;
 		}
-		iTCO_wdt_private.gcs = ioremap(iTCO_wdt_private.gcs_res->start,
-			resource_size(iTCO_wdt_private.gcs_res));
-		if (!iTCO_wdt_private.gcs) {
+		iTCO_wdt_private.gcs_pmc = ioremap(iTCO_wdt_private.gcs_pmc_res->start,
+			resource_size(iTCO_wdt_private.gcs_pmc_res));
+		if (!iTCO_wdt_private.gcs_pmc) {
 			ret = -EIO;
-			goto unreg_gcs;
+			goto unreg_gcs_pmc;
 		}
 	}
 
···
 	if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) {
 		pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n");
 		ret = -ENODEV;	/* Cannot reset NO_REBOOT bit */
-		goto unmap_gcs;
+		goto unmap_gcs_pmc;
 	}
 
 	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
···
 		pr_err("I/O address 0x%04llx already in use, device disabled\n",
 		       (u64)SMI_EN);
 		ret = -EBUSY;
-		goto unmap_gcs;
+		goto unmap_gcs_pmc;
 	}
 	if (turn_SMI_watchdog_clear_off >= iTCO_wdt_private.iTCO_version) {
 		/*
···
 		ich_info->name, ich_info->iTCO_version, (u64)TCOBASE);
 
 	/* Clear out the (probably old) status */
-	outw(0x0008, TCO1_STS);	/* Clear the Time Out Status bit */
-	outw(0x0002, TCO2_STS);	/* Clear SECOND_TO_STS bit */
-	outw(0x0004, TCO2_STS);	/* Clear BOOT_STS bit */
+	if (iTCO_wdt_private.iTCO_version == 3) {
+		outl(0x20008, TCO1_STS);
+	} else {
+		outw(0x0008, TCO1_STS);	/* Clear the Time Out Status bit */
+		outw(0x0002, TCO2_STS);	/* Clear SECOND_TO_STS bit */
+		outw(0x0004, TCO2_STS);	/* Clear BOOT_STS bit */
+	}
 
 	iTCO_wdt_watchdog_dev.bootstatus = 0;
 	iTCO_wdt_watchdog_dev.timeout = WATCHDOG_TIMEOUT;
···
 unreg_smi:
 	release_region(iTCO_wdt_private.smi_res->start,
 			resource_size(iTCO_wdt_private.smi_res));
-unmap_gcs:
-	if (iTCO_wdt_private.iTCO_version == 2)
-		iounmap(iTCO_wdt_private.gcs);
-unreg_gcs:
-	if (iTCO_wdt_private.iTCO_version == 2)
-		release_mem_region(iTCO_wdt_private.gcs_res->start,
-				resource_size(iTCO_wdt_private.gcs_res));
+unmap_gcs_pmc:
+	if (iTCO_wdt_private.iTCO_version >= 2)
+		iounmap(iTCO_wdt_private.gcs_pmc);
+unreg_gcs_pmc:
+	if (iTCO_wdt_private.iTCO_version >= 2)
+		release_mem_region(iTCO_wdt_private.gcs_pmc_res->start,
+				resource_size(iTCO_wdt_private.gcs_pmc_res));
 out:
 	iTCO_wdt_private.tco_res = NULL;
 	iTCO_wdt_private.smi_res = NULL;
-	iTCO_wdt_private.gcs_res = NULL;
-	iTCO_wdt_private.gcs = NULL;
+	iTCO_wdt_private.gcs_pmc_res = NULL;
+	iTCO_wdt_private.gcs_pmc = NULL;
 
 	return ret;
 }

include/linux/i2c/twl.h

···
 	return twl_i2c_read(mod_no, val, reg, 1);
 }
 
+static inline int twl_i2c_write_u16(u8 mod_no, u16 val, u8 reg) {
+	val = cpu_to_le16(val);
+	return twl_i2c_write(mod_no, (u8*) &val, reg, 2);
+}
+
+static inline int twl_i2c_read_u16(u8 mod_no, u16 *val, u8 reg) {
+	int ret;
+	ret = twl_i2c_read(mod_no, (u8*) val, reg, 2);
+	*val = le16_to_cpu(*val);
+	return ret;
+}
+
 int twl_get_type(void);
 int twl_get_version(void);
 int twl_get_hfclk_rate(void);

include/linux/i2c/twl4030-madc.h

···
 
 struct twl4030_madc_request {
 	unsigned long channels;
-	u16 do_avg;
+	bool do_avg;
 	u16 method;
 	u16 type;
 	bool active;

include/linux/mfd/arizona/registers.h

···
 #define ARIZONA_DSP1_STATUS_1                    0x1104
 #define ARIZONA_DSP1_STATUS_2                    0x1105
 #define ARIZONA_DSP1_STATUS_3                    0x1106
+#define ARIZONA_DSP1_STATUS_4                    0x1107
+#define ARIZONA_DSP1_WDMA_BUFFER_1               0x1110
+#define ARIZONA_DSP1_WDMA_BUFFER_2               0x1111
+#define ARIZONA_DSP1_WDMA_BUFFER_3               0x1112
+#define ARIZONA_DSP1_WDMA_BUFFER_4               0x1113
+#define ARIZONA_DSP1_WDMA_BUFFER_5               0x1114
+#define ARIZONA_DSP1_WDMA_BUFFER_6               0x1115
+#define ARIZONA_DSP1_WDMA_BUFFER_7               0x1116
+#define ARIZONA_DSP1_WDMA_BUFFER_8               0x1117
+#define ARIZONA_DSP1_RDMA_BUFFER_1               0x1120
+#define ARIZONA_DSP1_RDMA_BUFFER_2               0x1121
+#define ARIZONA_DSP1_RDMA_BUFFER_3               0x1122
+#define ARIZONA_DSP1_RDMA_BUFFER_4               0x1123
+#define ARIZONA_DSP1_RDMA_BUFFER_5               0x1124
+#define ARIZONA_DSP1_RDMA_BUFFER_6               0x1125
+#define ARIZONA_DSP1_WDMA_CONFIG_1               0x1130
+#define ARIZONA_DSP1_WDMA_CONFIG_2               0x1131
+#define ARIZONA_DSP1_WDMA_OFFSET_1               0x1132
+#define ARIZONA_DSP1_RDMA_CONFIG_1               0x1134
+#define ARIZONA_DSP1_RDMA_OFFSET_1               0x1135
+#define ARIZONA_DSP1_EXTERNAL_START_SELECT_1     0x1138
 #define ARIZONA_DSP1_SCRATCH_0                   0x1140
 #define ARIZONA_DSP1_SCRATCH_1                   0x1141
 #define ARIZONA_DSP1_SCRATCH_2                   0x1142
···
 #define ARIZONA_DSP2_STATUS_1                    0x1204
 #define ARIZONA_DSP2_STATUS_2                    0x1205
 #define ARIZONA_DSP2_STATUS_3                    0x1206
+#define ARIZONA_DSP2_STATUS_4                    0x1207
+#define ARIZONA_DSP2_WDMA_BUFFER_1               0x1210
+#define ARIZONA_DSP2_WDMA_BUFFER_2               0x1211
+#define ARIZONA_DSP2_WDMA_BUFFER_3               0x1212
+#define ARIZONA_DSP2_WDMA_BUFFER_4               0x1213
+#define ARIZONA_DSP2_WDMA_BUFFER_5               0x1214
+#define ARIZONA_DSP2_WDMA_BUFFER_6               0x1215
+#define ARIZONA_DSP2_WDMA_BUFFER_7               0x1216
+#define ARIZONA_DSP2_WDMA_BUFFER_8               0x1217
+#define ARIZONA_DSP2_RDMA_BUFFER_1               0x1220
+#define ARIZONA_DSP2_RDMA_BUFFER_2               0x1221
+#define ARIZONA_DSP2_RDMA_BUFFER_3               0x1222
+#define ARIZONA_DSP2_RDMA_BUFFER_4               0x1223
+#define ARIZONA_DSP2_RDMA_BUFFER_5               0x1224
+#define ARIZONA_DSP2_RDMA_BUFFER_6               0x1225
+#define ARIZONA_DSP2_WDMA_CONFIG_1               0x1230
+#define ARIZONA_DSP2_WDMA_CONFIG_2               0x1231
+#define ARIZONA_DSP2_WDMA_OFFSET_1               0x1232
+#define ARIZONA_DSP2_RDMA_CONFIG_1               0x1234
+#define ARIZONA_DSP2_RDMA_OFFSET_1               0x1235
+#define ARIZONA_DSP2_EXTERNAL_START_SELECT_1     0x1238
 #define ARIZONA_DSP2_SCRATCH_0                   0x1240
 #define ARIZONA_DSP2_SCRATCH_1                   0x1241
 #define ARIZONA_DSP2_SCRATCH_2                   0x1242
···
 #define ARIZONA_DSP3_STATUS_1                    0x1304
 #define ARIZONA_DSP3_STATUS_2                    0x1305
 #define ARIZONA_DSP3_STATUS_3                    0x1306
+#define ARIZONA_DSP3_STATUS_4                    0x1307
+#define ARIZONA_DSP3_WDMA_BUFFER_1               0x1310
+#define ARIZONA_DSP3_WDMA_BUFFER_2               0x1311
+#define ARIZONA_DSP3_WDMA_BUFFER_3               0x1312
+#define ARIZONA_DSP3_WDMA_BUFFER_4               0x1313
+#define ARIZONA_DSP3_WDMA_BUFFER_5               0x1314
+#define ARIZONA_DSP3_WDMA_BUFFER_6               0x1315
+#define ARIZONA_DSP3_WDMA_BUFFER_7               0x1316
+#define ARIZONA_DSP3_WDMA_BUFFER_8               0x1317
+#define ARIZONA_DSP3_RDMA_BUFFER_1               0x1320
+#define ARIZONA_DSP3_RDMA_BUFFER_2               0x1321
+#define ARIZONA_DSP3_RDMA_BUFFER_3               0x1322
+#define ARIZONA_DSP3_RDMA_BUFFER_4               0x1323
+#define ARIZONA_DSP3_RDMA_BUFFER_5               0x1324
+#define ARIZONA_DSP3_RDMA_BUFFER_6               0x1325
+#define ARIZONA_DSP3_WDMA_CONFIG_1               0x1330
+#define ARIZONA_DSP3_WDMA_CONFIG_2               0x1331
+#define ARIZONA_DSP3_WDMA_OFFSET_1               0x1332
+#define ARIZONA_DSP3_RDMA_CONFIG_1               0x1334
+#define ARIZONA_DSP3_RDMA_OFFSET_1               0x1335
+#define ARIZONA_DSP3_EXTERNAL_START_SELECT_1     0x1338
 #define ARIZONA_DSP3_SCRATCH_0                   0x1340
 #define ARIZONA_DSP3_SCRATCH_1                   0x1341
 #define ARIZONA_DSP3_SCRATCH_2                   0x1342
···
 #define ARIZONA_DSP4_STATUS_1                    0x1404
 #define ARIZONA_DSP4_STATUS_2                    0x1405
 #define ARIZONA_DSP4_STATUS_3                    0x1406
+#define ARIZONA_DSP4_STATUS_4                    0x1407
+#define ARIZONA_DSP4_WDMA_BUFFER_1               0x1410
+#define ARIZONA_DSP4_WDMA_BUFFER_2               0x1411
+#define ARIZONA_DSP4_WDMA_BUFFER_3               0x1412
+#define ARIZONA_DSP4_WDMA_BUFFER_4               0x1413
+#define ARIZONA_DSP4_WDMA_BUFFER_5               0x1414
+#define ARIZONA_DSP4_WDMA_BUFFER_6               0x1415
+#define ARIZONA_DSP4_WDMA_BUFFER_7               0x1416
+#define ARIZONA_DSP4_WDMA_BUFFER_8               0x1417
+#define ARIZONA_DSP4_RDMA_BUFFER_1               0x1420
+#define ARIZONA_DSP4_RDMA_BUFFER_2               0x1421
+#define ARIZONA_DSP4_RDMA_BUFFER_3               0x1422
+#define ARIZONA_DSP4_RDMA_BUFFER_4               0x1423
+#define ARIZONA_DSP4_RDMA_BUFFER_5               0x1424
+#define ARIZONA_DSP4_RDMA_BUFFER_6               0x1425
+#define ARIZONA_DSP4_WDMA_CONFIG_1               0x1430
+#define ARIZONA_DSP4_WDMA_CONFIG_2               0x1431
+#define ARIZONA_DSP4_WDMA_OFFSET_1               0x1432
+#define ARIZONA_DSP4_RDMA_CONFIG_1               0x1434
+#define ARIZONA_DSP4_RDMA_OFFSET_1               0x1435
+#define ARIZONA_DSP4_EXTERNAL_START_SELECT_1     0x1438
 #define ARIZONA_DSP4_SCRATCH_0                   0x1440
 #define ARIZONA_DSP4_SCRATCH_1                   0x1441
 #define ARIZONA_DSP4_SCRATCH_2                   0x1442

include/linux/mfd/bcm590xx.h

···
+/*
+ * Broadcom BCM590xx PMU
+ *
+ * Copyright 2014 Linaro Limited
+ * Author: Matt Porter <[e-mail]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_BCM590XX_H
+#define __LINUX_MFD_BCM590XX_H
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+/* max register address */
+#define BCM590XX_MAX_REGISTER	0xe7
+
+struct bcm590xx {
+	struct device *dev;
+	struct i2c_client *i2c_client;
+	struct regmap *regmap;
+	unsigned int id;
+};
+
+#endif /*  __LINUX_MFD_BCM590XX_H */

include/linux/mfd/da9052/da9052.h

···
 	DA9053_AA,
 	DA9053_BA,
 	DA9053_BB,
+	DA9053_BC,
 };
 
 struct da9052_pdata;

include/linux/mfd/da9063/core.h

···
 	PMIC_DA9063 = 0x61,
 };
 
+enum da9063_variant_codes {
+	PMIC_DA9063_BB = 0x5
+};
+
 /* Interrupts */
 enum da9063_irqs {
 	DA9063_IRQ_ONKEY = 0,
···
 	/* Device */
 	struct device	*dev;
 	unsigned short	model;
-	unsigned short	revision;
+	unsigned char	variant_code;
 	unsigned int	flags;
 
 	/* Control interface */

include/linux/mfd/da9063/registers.h

···
 #define	_DA9063_REG_H
 
 #define DA9063_I2C_PAGE_SEL_SHIFT	1
-
 #define	DA9063_EVENT_REG_NUM		4
-#define	DA9210_EVENT_REG_NUM		2
-#define	DA9063_EXT_EVENT_REG_NUM	(DA9063_EVENT_REG_NUM + \
-						DA9210_EVENT_REG_NUM)
 
 /* Page selection I2C or SPI always in the begining of any page. */
 /* Page 0 : I2C access 0x000 - 0x0FF	SPI access 0x000 - 0x07F */
···
 #define	DA9063_REG_GPIO_10_11		0x1A
 #define	DA9063_REG_GPIO_12_13		0x1B
 #define	DA9063_REG_GPIO_14_15		0x1C
-#define	DA9063_REG_GPIO_MODE_0_7	0x1D
-#define	DA9063_REG_GPIO_MODE_8_15	0x1E
-#define	DA9063_REG_GPIO_SWITCH_CONT	0x1F
+#define	DA9063_REG_GPIO_MODE0_7		0x1D
+#define	DA9063_REG_GPIO_MODE8_15	0x1E
+#define	DA9063_REG_SWITCH_CONT		0x1F
 
 /* Regulator Control Registers */
 #define	DA9063_REG_BCORE2_CONT		0x20
···
 #define	DA9063_REG_LDO9_CONT		0x2E
 #define	DA9063_REG_LDO10_CONT		0x2F
 #define	DA9063_REG_LDO11_CONT		0x30
-#define	DA9063_REG_VIB			0x31
+#define	DA9063_REG_SUPPLIES		0x31
 #define	DA9063_REG_DVC_1		0x32
 #define	DA9063_REG_DVC_2		0x33
 
···
 #define	DA9063_REG_ADCIN1_RES		0x3A
 #define	DA9063_REG_ADCIN2_RES		0x3B
 #define	DA9063_REG_ADCIN3_RES		0x3C
-#define	DA9063_REG_MON1_RES		0x3D
-#define	DA9063_REG_MON2_RES		0x3E
-#define	DA9063_REG_MON3_RES		0x3F
+#define	DA9063_REG_MON_A8_RES		0x3D
+#define	DA9063_REG_MON_A9_RES		0x3E
+#define	DA9063_REG_MON_A10_RES		0x3F
 
 /* RTC Calendar and Alarm Registers */
 #define	DA9063_REG_COUNT_S		0x40
···
 #define	DA9063_REG_COUNT_D		0x43
 #define	DA9063_REG_COUNT_MO		0x44
 #define	DA9063_REG_COUNT_Y		0x45
-#define	DA9063_REG_ALARM_MI		0x46
-#define	DA9063_REG_ALARM_H		0x47
-#define	DA9063_REG_ALARM_D		0x48
-#define	DA9063_REG_ALARM_MO		0x49
-#define	DA9063_REG_ALARM_Y		0x4A
-#define	DA9063_REG_SECOND_A		0x4B
-#define	DA9063_REG_SECOND_B		0x4C
-#define	DA9063_REG_SECOND_C		0x4D
-#define	DA9063_REG_SECOND_D		0x4E
+#define	DA9063_REG_ALARM_S		0x46
+#define	DA9063_REG_ALARM_MI		0x47
+#define	DA9063_REG_ALARM_H		0x48
+#define	DA9063_REG_ALARM_D		0x49
+#define	DA9063_REG_ALARM_MO		0x4A
+#define	DA9063_REG_ALARM_Y		0x4B
+#define	DA9063_REG_SECOND_A		0x4C
+#define	DA9063_REG_SECOND_B		0x4D
+#define	DA9063_REG_SECOND_C		0x4E
+#define	DA9063_REG_SECOND_D		0x4F
 
 /* Sequencer Control Registers */
 #define	DA9063_REG_SEQ			0x81
···
 #define	DA9063_REG_CONFIG_J		0x10F
 #define	DA9063_REG_CONFIG_K		0x110
 #define	DA9063_REG_CONFIG_L		0x111
-#define	DA9063_REG_MON_REG_1		0x112
-#define	DA9063_REG_MON_REG_2		0x113
-#define	DA9063_REG_MON_REG_3		0x114
-#define	DA9063_REG_MON_REG_4		0x115
-#define	DA9063_REG_MON_REG_5		0x116
-#define	DA9063_REG_MON_REG_6		0x117
-#define	DA9063_REG_TRIM_CLDR		0x118
+#define	DA9063_REG_CONFIG_M		0x112
+#define	DA9063_REG_CONFIG_N		0x113
 
+#define	DA9063_REG_MON_REG_1		0x114
+#define	DA9063_REG_MON_REG_2		0x115
+#define	DA9063_REG_MON_REG_3		0x116
+#define	DA9063_REG_MON_REG_4		0x117
+#define	DA9063_REG_MON_REG_5		0x11E
+#define	DA9063_REG_MON_REG_6		0x11F
+#define	DA9063_REG_TRIM_CLDR		0x120
 /* General Purpose Registers */
-#define	DA9063_REG_GP_ID_0		0x119
-#define	DA9063_REG_GP_ID_1		0x11A
-#define	DA9063_REG_GP_ID_2		0x11B
-#define	DA9063_REG_GP_ID_3		0x11C
-#define	DA9063_REG_GP_ID_4		0x11D
-#define	DA9063_REG_GP_ID_5		0x11E
-#define	DA9063_REG_GP_ID_6		0x11F
-#define	DA9063_REG_GP_ID_7		0x120
-#define	DA9063_REG_GP_ID_8		0x121
-#define	DA9063_REG_GP_ID_9		0x122
-#define	DA9063_REG_GP_ID_10		0x123
-#define	DA9063_REG_GP_ID_11		0x124
-#define	DA9063_REG_GP_ID_12		0x125
-#define	DA9063_REG_GP_ID_13		0x126
-#define	DA9063_REG_GP_ID_14		0x127
-#define	DA9063_REG_GP_ID_15		0x128
-#define	DA9063_REG_GP_ID_16		0x129
-#define	DA9063_REG_GP_ID_17		0x12A
-#define	DA9063_REG_GP_ID_18		0x12B
-#define	DA9063_REG_GP_ID_19		0x12C
+#define	DA9063_REG_GP_ID_0		0x121
+#define	DA9063_REG_GP_ID_1		0x122
+#define	DA9063_REG_GP_ID_2		0x123
+#define	DA9063_REG_GP_ID_3		0x124
+#define	DA9063_REG_GP_ID_4		0x125
+#define	DA9063_REG_GP_ID_5		0x126
+#define	DA9063_REG_GP_ID_6		0x127
+#define	DA9063_REG_GP_ID_7		0x128
+#define	DA9063_REG_GP_ID_8		0x129
+#define	DA9063_REG_GP_ID_9		0x12A
+#define	DA9063_REG_GP_ID_10		0x12B
+#define	DA9063_REG_GP_ID_11		0x12C
+#define	DA9063_REG_GP_ID_12		0x12D
+#define	DA9063_REG_GP_ID_13		0x12E
+#define	DA9063_REG_GP_ID_14		0x12F
+#define	DA9063_REG_GP_ID_15		0x130
+#define	DA9063_REG_GP_ID_16		0x131
+#define	DA9063_REG_GP_ID_17		0x132
+#define	DA9063_REG_GP_ID_18		0x133
+#define	DA9063_REG_GP_ID_19		0x134
 
 /* Chip ID and variant */
 #define	DA9063_REG_CHIP_ID		0x181
···
 /* DA9063_REG_CONTROL_B (addr=0x0F) */
 #define	DA9063_CHG_SEL				0x01
 #define	DA9063_WATCHDOG_PD			0x02
+#define	DA9063_RESET_BLINKING			0x04
 #define	DA9063_NRES_MODE			0x08
 #define	DA9063_NONKEY_LOCK			0x10
+#define	DA9063_BUCK_SLOWSTART			0x80
 
 /* DA9063_REG_CONTROL_C (addr=0x10) */
 #define	DA9063_DEBOUNCING_MASK			0x07
···
 #define	DA9063_GPADC_PAUSE			0x02
 #define	DA9063_PMIF_DIS				0x04
 #define	DA9063_HS2WIRE_DIS			0x08
+#define	DA9063_CLDR_PAUSE			0x10
 #define	DA9063_BBAT_DIS				0x20
 #define	DA9063_OUT_32K_PAUSE			0x40
 #define	DA9063_PMCONT_DIS			0x80
···
 #define		DA9063_GPIO15_TYPE_GPO		0x04
 #define	DA9063_GPIO15_NO_WAKEUP			0x80
 
-/* DA9063_REG_GPIO_MODE_0_7 (addr=0x1D) */
+/* DA9063_REG_GPIO_MODE0_7 (addr=0x1D) */
 #define	DA9063_GPIO0_MODE			0x01
 #define	DA9063_GPIO1_MODE			0x02
 #define	DA9063_GPIO2_MODE			0x04
···
 #define	DA9063_GPIO6_MODE			0x40
 #define	DA9063_GPIO7_MODE			0x80
 
-/* DA9063_REG_GPIO_MODE_8_15 (addr=0x1E) */
+/* DA9063_REG_GPIO_MODE8_15 (addr=0x1E) */
 #define	DA9063_GPIO8_MODE			0x01
 #define	DA9063_GPIO9_MODE			0x02
 #define	DA9063_GPIO10_MODE			0x04
···
 #define		DA9063_SWITCH_SR_5MV		0x10
 #define		DA9063_SWITCH_SR_10MV		0x20
 #define		DA9063_SWITCH_SR_50MV		0x30
-#define	DA9063_SWITCH_SR_DIS			0x40
+#define	DA9063_CORE_SW_INTERNAL			0x40
 #define	DA9063_CP_EN_MODE			0x80
 
 /* DA9063_REGL_Bxxxx_CONT common bits (addr=0x20-0x25) */
 #define	DA9063_BUCK_EN				0x01
-#define DA9063_BUCK_GPI_MASK			0x06
+#define	DA9063_BUCK_GPI_MASK			0x06
 #define		DA9063_BUCK_GPI_OFF		0x00
 #define		DA9063_BUCK_GPI_GPIO1		0x02
 #define		DA9063_BUCK_GPI_GPIO2		0x04
···
 #define DA9063_COUNT_YEAR_MASK			0x3F
 #define DA9063_MONITOR				0x40
 
-/* DA9063_REG_ALARM_MI (addr=0x46) */
+/* DA9063_REG_ALARM_S (addr=0x46) */
+#define DA9063_ALARM_S_MASK			0x3F
 #define DA9063_ALARM_STATUS_ALARM		0x80
 #define DA9063_ALARM_STATUS_TICK		0x40
+/* DA9063_REG_ALARM_MI (addr=0x47) */
 #define DA9063_ALARM_MIN_MASK			0x3F
 
-/* DA9063_REG_ALARM_H (addr=0x47) */
+/* DA9063_REG_ALARM_H (addr=0x48) */
 #define DA9063_ALARM_HOUR_MASK			0x1F
 
-/* DA9063_REG_ALARM_D (addr=0x48) */
+/* DA9063_REG_ALARM_D (addr=0x49) */
 #define DA9063_ALARM_DAY_MASK			0x1F
 
-/* DA9063_REG_ALARM_MO (addr=0x49) */
+/* DA9063_REG_ALARM_MO (addr=0x4A) */
 #define DA9063_TICK_WAKE			0x20
 #define DA9063_TICK_TYPE			0x10
 #define		DA9063_TICK_TYPE_SEC		0x00
 #define		DA9063_TICK_TYPE_MIN		0x10
 #define DA9063_ALARM_MONTH_MASK			0x0F
 
-/* DA9063_REG_ALARM_Y (addr=0x4A) */
+/* DA9063_REG_ALARM_Y (addr=0x4B) */
 #define DA9063_TICK_ON				0x80
 #define DA9063_ALARM_ON				0x40
 #define DA9063_ALARM_YEAR_MASK			0x3F
···
 
 /* DA9063_REG_Bxxxx_CFG common bits (addr=0x9D-0xA2) */
 #define DA9063_BUCK_FB_MASK			0x07
-#define DA9063_BUCK_PD_DIS_SHIFT		5
+#define DA9063_BUCK_PD_DIS_MASK		0x20
 #define DA9063_BUCK_MODE_MASK			0xC0
 #define		DA9063_BUCK_MODE_MANUAL		0x00
 #define		DA9063_BUCK_MODE_SLEEP		0x40

include/linux/mfd/lpc_ich.h

···
 #define LPC_ICH_H
 
 /* Watchdog resources */
-#define ICH_RES_IO_TCO	0
-#define ICH_RES_IO_SMI	1
-#define ICH_RES_MEM_OFF	2
-#define ICH_RES_MEM_GCS	0
+#define ICH_RES_IO_TCO		0
+#define ICH_RES_IO_SMI		1
+#define ICH_RES_MEM_OFF		2
+#define ICH_RES_MEM_GCS_PMC	0
 
 /* GPIO resources */
 #define ICH_RES_GPIO	0
 #define ICH_RES_GPE0	1
 
 /* GPIO compatibility */
-#define ICH_I3100_GPIO		0x401
-#define ICH_V5_GPIO		0x501
-#define ICH_V6_GPIO		0x601
-#define ICH_V7_GPIO		0x701
-#define ICH_V9_GPIO		0x801
-#define ICH_V10CORP_GPIO	0xa01
-#define ICH_V10CONS_GPIO	0xa11
+enum {
+	ICH_I3100_GPIO,
+	ICH_V5_GPIO,
+	ICH_V6_GPIO,
+	ICH_V7_GPIO,
+	ICH_V9_GPIO,
+	ICH_V10CORP_GPIO,
+	ICH_V10CONS_GPIO,
+	AVOTON_GPIO,
+};
 
 struct lpc_ich_info {
 	char name[32];

include/linux/mfd/max14577-private.h

···
 /* MAX14577 regulator SFOUT LDO voltage, fixed, uV */
 #define MAX14577_REGULATOR_SAFEOUT_VOLTAGE		4900000
 
-enum max14577_irq_source {
-	MAX14577_IRQ_INT1 = 0,
-	MAX14577_IRQ_INT2,
-	MAX14577_IRQ_INT3,
-
-	MAX14577_IRQ_REGS_NUM,
-};
-
 enum max14577_irq {
 	/* INT1 */
 	MAX14577_IRQ_INT1_ADC,

include/linux/mfd/max14577.h

···
 #ifndef __MAX14577_H__
 #define __MAX14577_H__
 
-#include <linux/mfd/max14577-private.h>
 #include <linux/regulator/consumer.h>
-
-/*
- * MAX14577 Regulator
- */
 
 /* MAX14577 regulator IDs */
 enum max14577_regulators {

include/linux/mfd/pm8xxx/irq.h

···
-/*
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/*
- * Qualcomm PMIC irq 8xxx driver header file
- *
- */
-
-#ifndef __MFD_PM8XXX_IRQ_H
-#define __MFD_PM8XXX_IRQ_H
-
-#include <linux/errno.h>
-#include <linux/err.h>
-
-struct pm8xxx_irq_core_data {
-	u32		rev;
-	int		nirqs;
-};
-
-struct pm8xxx_irq_platform_data {
-	int				irq_base;
-	struct pm8xxx_irq_core_data	irq_cdata;
-	int				devirq;
-	int				irq_trigger_flag;
-};
-
-struct pm_irq_chip;
-
-#ifdef CONFIG_MFD_PM8XXX_IRQ
-int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq);
-struct pm_irq_chip *pm8xxx_irq_init(struct device *dev,
-				const struct pm8xxx_irq_platform_data *pdata);
-int pm8xxx_irq_exit(struct pm_irq_chip *chip);
-#else
-static inline int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
-{
-	return -ENXIO;
-}
-static inline struct pm_irq_chip *pm8xxx_irq_init(
-				const struct device *dev,
-				const struct pm8xxx_irq_platform_data *pdata)
-{
-	return ERR_PTR(-ENXIO);
-}
-static inline int pm8xxx_irq_exit(struct pm_irq_chip *chip)
-{
-	return -ENXIO;
-}
-#endif /* CONFIG_MFD_PM8XXX_IRQ */
-#endif /* __MFD_PM8XXX_IRQ_H */

include/linux/mfd/pm8xxx/pm8921.h

···
-/*
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/*
- * Qualcomm PMIC 8921 driver header file
- *
- */
-
-#ifndef __MFD_PM8921_H
-#define __MFD_PM8921_H
-
-#include <linux/mfd/pm8xxx/irq.h>
-
-#define PM8921_NR_IRQS		256
-
-struct pm8921_platform_data {
-	int					irq_base;
-	struct pm8xxx_irq_platform_data		*irq_pdata;
-};
-
-#endif

include/linux/mfd/rtsx_usb.h

···
+/* Driver for Realtek RTS5139 USB card reader
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Roger Tseng <[e-mail]>
+ */
+
+#ifndef __RTSX_USB_H
+#define __RTSX_USB_H
+
+#include <linux/usb.h>
+
+/* related module names */
+#define RTSX_USB_SD_CARD	0
+#define RTSX_USB_MS_CARD	1
+
+/* endpoint numbers */
+#define EP_BULK_OUT		1
+#define EP_BULK_IN		2
+#define EP_INTR_IN		3
+
+/* USB vendor requests */
+#define RTSX_USB_REQ_REG_OP	0x00
+#define RTSX_USB_REQ_POLL	0x02
+
+/* miscellaneous parameters */
+#define MIN_DIV_N		60
+#define MAX_DIV_N		120
+
+#define MAX_PHASE		15
+#define RX_TUNING_CNT		3
+
+#define QFN24			0
+#define LQFP48			1
+#define CHECK_PKG(ucr, pkg)	((ucr)->package == (pkg))
+
+/* data structures */
+struct rtsx_ucr {
+	u16			vendor_id;
+	u16			product_id;
+
+	int			package;
+	u8			ic_version;
+	bool			is_rts5179;
+
+	unsigned int		cur_clk;
+
+	u8			*cmd_buf;
+	unsigned int		cmd_idx;
+	u8			*rsp_buf;
+
+	struct usb_device	*pusb_dev;
+	struct usb_interface	*pusb_intf;
+	struct usb_sg_request	current_sg;
+	unsigned char		*iobuf;
+	dma_addr_t		iobuf_dma;
+
+	struct timer_list	sg_timer;
+	struct mutex		dev_mutex;
+};
+
+/* buffer size */
+#define IOBUF_SIZE		1024
+
+/* prototypes of exported functions */
+extern int rtsx_usb_get_card_status(struct rtsx_ucr *ucr, u16 *status);
+
+extern int rtsx_usb_read_register(struct rtsx_ucr *ucr, u16 addr, u8 *data);
+extern int rtsx_usb_write_register(struct rtsx_ucr *ucr, u16 addr, u8 mask,
+		u8 data);
+
+extern int rtsx_usb_ep0_write_register(struct rtsx_ucr *ucr, u16 addr, u8 mask,
+		u8 data);
+extern int rtsx_usb_ep0_read_register(struct rtsx_ucr *ucr, u16 addr,
+		u8 *data);
+
+extern void rtsx_usb_add_cmd(struct rtsx_ucr *ucr, u8 cmd_type,
+		u16 reg_addr, u8 mask, u8 data);
+extern int rtsx_usb_send_cmd(struct rtsx_ucr *ucr, u8 flag, int timeout);
+extern int rtsx_usb_get_rsp(struct rtsx_ucr *ucr, int rsp_len, int timeout);
+extern int rtsx_usb_transfer_data(struct rtsx_ucr *ucr, unsigned int pipe,
+			      void *buf, unsigned int len, int use_sg,
+			      unsigned int *act_len, int timeout);
+
+extern int rtsx_usb_read_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len);
+extern int rtsx_usb_write_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len);
+extern int rtsx_usb_switch_clock(struct rtsx_ucr *ucr, unsigned int card_clock,
+		u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk);
+extern int rtsx_usb_card_exclusive_check(struct rtsx_ucr *ucr, int card);
+
+/* card status */
+#define SD_CD		0x01
+#define MS_CD		0x02
+#define XD_CD		0x04
+#define CD_MASK		(SD_CD | MS_CD | XD_CD)
+#define SD_WP		0x08
+
+/* reader command field offset & parameters */
+#define READ_REG_CMD		0
+#define WRITE_REG_CMD		1
+#define CHECK_REG_CMD		2
+
+#define PACKET_TYPE		4
+#define CNT_H			5
+#define CNT_L			6
+#define STAGE_FLAG		7
+#define CMD_OFFSET		8
+#define SEQ_WRITE_DATA_OFFSET	12
+
+#define BATCH_CMD		0
+#define SEQ_READ		1
+#define SEQ_WRITE		2
+
+#define STAGE_R			0x01
+#define STAGE_DI		0x02
+#define STAGE_DO		0x04
+#define STAGE_MS_STATUS		0x08
+#define STAGE_XD_STATUS		0x10
+#define MODE_C			0x00
+#define MODE_CR			(STAGE_R)
+#define MODE_CDIR		(STAGE_R | STAGE_DI)
+#define MODE_CDOR		(STAGE_R | STAGE_DO)
+
+#define EP0_OP_SHIFT		14
+#define EP0_READ_REG_CMD	2
+#define EP0_WRITE_REG_CMD	3
+
+#define rtsx_usb_cmd_hdr_tag(ucr)		\
+	do {					\
+		ucr->cmd_buf[0] = 'R';		\
+		ucr->cmd_buf[1] = 'T';		\
+		ucr->cmd_buf[2] = 'C';		\
+		ucr->cmd_buf[3] = 'R';		\
+	} while (0)
+
+static inline void rtsx_usb_init_cmd(struct rtsx_ucr *ucr)
+{
+	rtsx_usb_cmd_hdr_tag(ucr);
+	ucr->cmd_idx = 0;
+	ucr->cmd_buf[PACKET_TYPE] = BATCH_CMD;
+}
+
+/* internal register address */
+#define FPDCTL				0xFC00
+#define SSC_DIV_N_0			0xFC07
+#define SSC_CTL1			0xFC09
+#define SSC_CTL2			0xFC0A
+#define CFG_MODE			0xFC0E
+#define CFG_MODE_1			0xFC0F
+#define RCCTL				0xFC14
+#define SOF_WDOG			0xFC28
+#define SYS_DUMMY0			0xFC30
+
+#define MS_BLKEND			0xFD30
+#define MS_READ_START			0xFD31
+#define MS_READ_COUNT			0xFD32
+#define MS_WRITE_START			0xFD33
+#define MS_WRITE_COUNT			0xFD34
+#define MS_COMMAND			0xFD35
+#define MS_OLD_BLOCK_0			0xFD36
+#define MS_OLD_BLOCK_1			0xFD37
+#define MS_NEW_BLOCK_0			0xFD38
+#define MS_NEW_BLOCK_1			0xFD39
+#define MS_LOG_BLOCK_0			0xFD3A
+#define MS_LOG_BLOCK_1			0xFD3B
+#define MS_BUS_WIDTH			0xFD3C
+#define MS_PAGE_START			0xFD3D
+#define MS_PAGE_LENGTH			0xFD3E
+#define MS_CFG				0xFD40
+#define MS_TPC				0xFD41
+#define MS_TRANS_CFG			0xFD42
+#define MS_TRANSFER			0xFD43
+#define MS_INT_REG			0xFD44
+#define MS_BYTE_CNT			0xFD45
+#define MS_SECTOR_CNT_L			0xFD46
+#define MS_SECTOR_CNT_H			0xFD47
+#define MS_DBUS_H			0xFD48
+
+#define CARD_DMA1_CTL			0xFD5C
+#define CARD_PULL_CTL1			0xFD60
+#define CARD_PULL_CTL2			0xFD61
+#define CARD_PULL_CTL3			0xFD62
+#define CARD_PULL_CTL4			0xFD63
+#define CARD_PULL_CTL5			0xFD64
+#define CARD_PULL_CTL6			0xFD65
+#define CARD_EXIST			0xFD6F
+#define CARD_INT_PEND			0xFD71
+
+#define LDO_POWER_CFG			0xFD7B
+
+#define SD_CFG1				0xFDA0
+#define SD_CFG2				0xFDA1
+#define SD_CFG3				0xFDA2
+#define SD_STAT1			0xFDA3
+#define SD_STAT2			0xFDA4
+#define SD_BUS_STAT			0xFDA5
+#define SD_PAD_CTL			0xFDA6
+#define SD_SAMPLE_POINT_CTL		0xFDA7
+#define SD_PUSH_POINT_CTL		0xFDA8
+#define SD_CMD0				0xFDA9
+#define SD_CMD1				0xFDAA
+#define SD_CMD2				0xFDAB
+#define SD_CMD3				0xFDAC
+#define SD_CMD4				0xFDAD
+#define SD_CMD5				0xFDAE
+#define SD_BYTE_CNT_L			0xFDAF
+#define SD_BYTE_CNT_H			0xFDB0
+#define SD_BLOCK_CNT_L			0xFDB1
+#define SD_BLOCK_CNT_H			0xFDB2
+#define SD_TRANSFER			0xFDB3
+#define SD_CMD_STATE			0xFDB5
+#define SD_DATA_STATE			0xFDB6
+#define SD_VPCLK0_CTL			0xFC2A
+#define SD_VPCLK1_CTL			0xFC2B
+#define SD_DCMPS0_CTL			0xFC2C
+#define SD_DCMPS1_CTL			0xFC2D
+
+#define CARD_DMA1_CTL			0xFD5C
+
+#define HW_VERSION			0xFC01
+
+#define SSC_CLK_FPGA_SEL		0xFC02
+#define CLK_DIV				0xFC03
+#define SFSM_ED				0xFC04
+
+#define CD_DEGLITCH_WIDTH		0xFC20
+#define CD_DEGLITCH_EN			0xFC21
+#define AUTO_DELINK_EN			0xFC23
+
+#define FPGA_PULL_CTL			0xFC1D
+#define CARD_CLK_SOURCE			0xFC2E
+
+#define CARD_SHARE_MODE			0xFD51
+#define CARD_DRIVE_SEL			0xFD52
+#define CARD_STOP			0xFD53
+#define CARD_OE				0xFD54
+#define CARD_AUTO_BLINK			0xFD55
+#define CARD_GPIO			0xFD56
+#define SD30_DRIVE_SEL			0xFD57
+
+#define CARD_DATA_SOURCE		0xFD5D
+#define CARD_SELECT			0xFD5E
+
+#define CARD_CLK_EN			0xFD79
+#define CARD_PWR_CTL			0xFD7A
+
+#define OCPCTL				0xFD80
+#define OCPPARA1			0xFD81
+#define OCPPARA2			0xFD82
+#define OCPSTAT				0xFD83
+
+#define HS_USB_STAT			0xFE01
+#define HS_VCONTROL			0xFE26
+#define HS_VSTAIN			0xFE27
+#define HS_VLOADM			0xFE28
+#define HS_VSTAOUT			0xFE29
+
+#define MC_IRQ				0xFF00
+#define MC_IRQEN			0xFF01
+#define MC_FIFO_CTL			0xFF02
+#define MC_FIFO_BC0			0xFF03
+#define MC_FIFO_BC1			0xFF04
+#define MC_FIFO_STAT			0xFF05
+#define MC_FIFO_MODE			0xFF06
+#define MC_FIFO_RD_PTR0			0xFF07
+#define MC_FIFO_RD_PTR1			0xFF08
+#define MC_DMA_CTL			0xFF10
+#define MC_DMA_TC0			0xFF11
+#define MC_DMA_TC1			0xFF12
+#define MC_DMA_TC2			0xFF13
+#define MC_DMA_TC3			0xFF14
+#define MC_DMA_RST			0xFF15
+
+#define RBUF_SIZE_MASK			0xFBFF
+#define RBUF_BASE			0xF000
+#define PPBUF_BASE1			0xF800
+#define PPBUF_BASE2			0xFA00
+
+/* internal register value macros */
+#define POWER_OFF			0x03
+#define PARTIAL_POWER_ON		0x02
+#define POWER_ON			0x00
+#define POWER_MASK			0x03
+#define LDO3318_PWR_MASK		0x0C
+#define LDO_ON				0x00
+#define LDO_SUSPEND			0x08
+#define LDO_OFF				0x0C
+#define DV3318_AUTO_PWR_OFF		0x10
+#define FORCE_LDO_POWERB		0x60
+
+/* LDO_POWER_CFG */
+#define TUNE_SD18_MASK			0x1C
+#define TUNE_SD18_1V7			0x00
+#define TUNE_SD18_1V8			(0x01 << 2)
+#define TUNE_SD18_1V9			(0x02 << 2)
+#define TUNE_SD18_2V0			(0x03 << 2)
+#define TUNE_SD18_2V7			(0x04 << 2)
+#define TUNE_SD18_2V8			(0x05 << 2)
+#define TUNE_SD18_2V9			(0x06 << 2)
+#define TUNE_SD18_3V3			(0x07 << 2)
+
+/* CLK_DIV */
+#define CLK_CHANGE			0x80
+#define CLK_DIV_1			0x00
+#define CLK_DIV_2			0x01
+#define CLK_DIV_4			0x02
+#define CLK_DIV_8			0x03
+
+#define SSC_POWER_MASK			0x01
+#define SSC_POWER_DOWN			0x01
+#define SSC_POWER_ON			0x00
+
+#define FPGA_VER			0x80
+#define HW_VER_MASK			0x0F
+
+#define EXTEND_DMA1_ASYNC_SIGNAL	0x02
+
+/* CFG_MODE*/
+#define XTAL_FREE			0x80
+#define CLK_MODE_MASK			0x03
+#define CLK_MODE_12M_XTAL		0x00
+#define CLK_MODE_NON_XTAL		0x01
+#define CLK_MODE_24M_OSC		0x02
+#define CLK_MODE_48M_OSC		0x03
+
+/* CFG_MODE_1*/
+#define RTS5179				0x02
+
+#define NYET_EN				0x01
+#define NYET_MSAK			0x01
+
+#define SD30_DRIVE_MASK			0x07
+#define SD20_DRIVE_MASK			0x03
+
+#define DISABLE_SD_CD			0x08
+#define DISABLE_MS_CD			0x10
+#define DISABLE_XD_CD			0x20
+#define SD_CD_DEGLITCH_EN		0x01
+#define MS_CD_DEGLITCH_EN		0x02
+#define XD_CD_DEGLITCH_EN		0x04
+
+#define	CARD_SHARE_LQFP48		0x04
+#define	CARD_SHARE_QFN24		0x00
+#define CARD_SHARE_LQFP_SEL		0x04
+#define	CARD_SHARE_XD			0x00
+#define	CARD_SHARE_SD			0x01
+#define	CARD_SHARE_MS			0x02
+#define CARD_SHARE_MASK			0x03
+
+
+/* SD30_DRIVE_SEL */
+#define DRIVER_TYPE_A			0x05
+#define DRIVER_TYPE_B			0x03
+#define DRIVER_TYPE_C			0x02
+#define DRIVER_TYPE_D			0x01
+
+/* SD_BUS_STAT */
+#define	SD_CLK_TOGGLE_EN		0x80
+#define	SD_CLK_FORCE_STOP	        0x40
+#define	SD_DAT3_STATUS		        0x10
+#define	SD_DAT2_STATUS		        0x08
+#define	SD_DAT1_STATUS		        0x04
+#define	SD_DAT0_STATUS		        0x02
+#define	SD_CMD_STATUS			0x01
+
+/* SD_PAD_CTL */
+#define	SD_IO_USING_1V8		        0x80
+#define	SD_IO_USING_3V3		        0x7F
+#define	TYPE_A_DRIVING		        0x00
+#define	TYPE_B_DRIVING			0x01
+#define	TYPE_C_DRIVING			0x02
+#define	TYPE_D_DRIVING		        0x03
+
+/* CARD_CLK_EN */
+#define SD_CLK_EN			0x04
+#define MS_CLK_EN			0x08
+
+/* CARD_SELECT */
+#define SD_MOD_SEL			2
+#define MS_MOD_SEL			3
+
+/* CARD_SHARE_MODE */
+#define	CARD_SHARE_LQFP48		0x04
+#define	CARD_SHARE_QFN24		0x00
+#define CARD_SHARE_LQFP_SEL		0x04
+#define	CARD_SHARE_XD			0x00
+#define	CARD_SHARE_SD			0x01
+#define	CARD_SHARE_MS			0x02
+#define CARD_SHARE_MASK			0x03
+
+/* SSC_CTL1 */
+#define SSC_RSTB			0x80
+#define SSC_8X_EN			0x40
+#define SSC_FIX_FRAC			0x20
+#define SSC_SEL_1M			0x00
+#define SSC_SEL_2M			0x08
+#define SSC_SEL_4M			0x10
+#define SSC_SEL_8M			0x18
+
+/* SSC_CTL2 */
+#define SSC_DEPTH_MASK			0x03
+#define SSC_DEPTH_DISALBE		0x00
+#define SSC_DEPTH_2M			0x01
+#define SSC_DEPTH_1M			0x02
+#define SSC_DEPTH_512K			0x03
+
+/* SD_VPCLK0_CTL */
+#define PHASE_CHANGE			0x80
+#define PHASE_NOT_RESET			0x40
+
+/* SD_TRANSFER */
+#define	SD_TRANSFER_START		0x80
+#define	SD_TRANSFER_END			0x40
+#define SD_STAT_IDLE			0x20
+#define	SD_TRANSFER_ERR			0x10
+#define	SD_TM_NORMAL_WRITE		0x00
+#define	SD_TM_AUTO_WRITE_3		0x01
+#define	SD_TM_AUTO_WRITE_4		0x02
+#define	SD_TM_AUTO_READ_3		0x05
+#define	SD_TM_AUTO_READ_4		0x06
+#define	SD_TM_CMD_RSP			0x08
+#define	SD_TM_AUTO_WRITE_1		0x09
+#define	SD_TM_AUTO_WRITE_2		0x0A
+#define	SD_TM_NORMAL_READ		0x0C
+#define	SD_TM_AUTO_READ_1		0x0D
+#define	SD_TM_AUTO_READ_2		0x0E
+#define	SD_TM_AUTO_TUNING		0x0F
+
+/* SD_CFG1 */
+#define SD_CLK_DIVIDE_0			0x00
+#define	SD_CLK_DIVIDE_256		0xC0
+#define	SD_CLK_DIVIDE_128		0x80
+#define SD_CLK_DIVIDE_MASK		0xC0
+#define	SD_BUS_WIDTH_1BIT		0x00
+#define	SD_BUS_WIDTH_4BIT		0x01
+#define	SD_BUS_WIDTH_8BIT		0x02
+#define	SD_ASYNC_FIFO_RST		0x10
+#define	SD_20_MODE			0x00
+#define	SD_DDR_MODE			0x04
+#define	SD_30_MODE			0x08
+
+/* SD_CFG2 */
+#define	SD_CALCULATE_CRC7		0x00
+#define	SD_NO_CALCULATE_CRC7		0x80
+#define	SD_CHECK_CRC16			0x00
+#define	SD_NO_CHECK_CRC16		0x40
+#define SD_WAIT_CRC_TO_EN		0x20
+#define	SD_WAIT_BUSY_END		0x08
+#define	SD_NO_WAIT_BUSY_END		0x00
+#define	SD_CHECK_CRC7			0x00
+#define	SD_NO_CHECK_CRC7		0x04
+#define	SD_RSP_LEN_0			0x00
+#define	SD_RSP_LEN_6			0x01
+#define	SD_RSP_LEN_17			0x02
+#define	SD_RSP_TYPE_R0			0x04
+#define	SD_RSP_TYPE_R1			0x01
+#define	SD_RSP_TYPE_R1b			0x09
+#define	SD_RSP_TYPE_R2			0x02
+#define	SD_RSP_TYPE_R3			0x05
+#define	SD_RSP_TYPE_R4			0x05
+#define	SD_RSP_TYPE_R5			0x01
+#define	SD_RSP_TYPE_R6			0x01
+#define	SD_RSP_TYPE_R7			0x01
+
+/* SD_STAT1 */
+#define	SD_CRC7_ERR			0x80
+#define	SD_CRC16_ERR			0x40
+#define	SD_CRC_WRITE_ERR		0x20
+#define	SD_CRC_WRITE_ERR_MASK		0x1C
+#define	GET_CRC_TIME_OUT		0x02
+#define	SD_TUNING_COMPARE_ERR		0x01
+
+/* SD_DATA_STATE */
+#define SD_DATA_IDLE			0x80
+
+/* CARD_DATA_SOURCE */
+#define PINGPONG_BUFFER			0x01
+#define RING_BUFFER			0x00
+
+/* CARD_OE */
+#define SD_OUTPUT_EN			0x04
+#define MS_OUTPUT_EN			0x08
+
+/* CARD_STOP */
+#define SD_STOP				0x04
+#define MS_STOP				0x08
+#define SD_CLR_ERR			0x40
+#define MS_CLR_ERR			0x80
+
+/* CARD_CLK_SOURCE */
+#define CRC_FIX_CLK			(0x00 << 0)
+#define CRC_VAR_CLK0			(0x01 << 0)
+#define CRC_VAR_CLK1			(0x02 << 0)
+#define SD30_FIX_CLK			(0x00 << 2)
+#define SD30_VAR_CLK0			(0x01 << 2)
+#define SD30_VAR_CLK1			(0x02 << 2)
+#define SAMPLE_FIX_CLK			(0x00 << 4)
+#define SAMPLE_VAR_CLK0			(0x01 << 4)
+#define SAMPLE_VAR_CLK1			(0x02 << 4)
+
+/* SD_SAMPLE_POINT_CTL */
+#define	DDR_FIX_RX_DAT			0x00
+#define	DDR_VAR_RX_DAT			0x80
+#define	DDR_FIX_RX_DAT_EDGE		0x00
+#define	DDR_FIX_RX_DAT_14_DELAY		0x40
+#define	DDR_FIX_RX_CMD			0x00
+#define	DDR_VAR_RX_CMD			0x20
+#define	DDR_FIX_RX_CMD_POS_EDGE		0x00
+#define	DDR_FIX_RX_CMD_14_DELAY		0x10
+#define	SD20_RX_POS_EDGE		0x00
+#define	SD20_RX_14_DELAY		0x08
+#define SD20_RX_SEL_MASK		0x08
+
+/* SD_PUSH_POINT_CTL */
+#define	DDR_FIX_TX_CMD_DAT		0x00
+#define	DDR_VAR_TX_CMD_DAT		0x80
+#define	DDR_FIX_TX_DAT_14_TSU		0x00
+#define	DDR_FIX_TX_DAT_12_TSU		0x40
+#define	DDR_FIX_TX_CMD_NEG_EDGE		0x00
+#define	DDR_FIX_TX_CMD_14_AHEAD		0x20
+#define	SD20_TX_NEG_EDGE		0x00
+#define	SD20_TX_14_AHEAD		0x10
+#define SD20_TX_SEL_MASK		0x10
+#define	DDR_VAR_SDCLK_POL_SWAP		0x01
+
+/* MS_CFG */
+#define	SAMPLE_TIME_RISING		0x00
+#define	SAMPLE_TIME_FALLING		0x80
+#define	PUSH_TIME_DEFAULT		0x00
+#define	PUSH_TIME_ODD			0x40
+#define	NO_EXTEND_TOGGLE		0x00
+#define	EXTEND_TOGGLE_CHK		0x20
+#define	MS_BUS_WIDTH_1			0x00
+#define	MS_BUS_WIDTH_4			0x10
+#define	MS_BUS_WIDTH_8			0x18
+#define	MS_2K_SECTOR_MODE		0x04
+#define	MS_512_SECTOR_MODE		0x00
+#define	MS_TOGGLE_TIMEOUT_EN		0x00
+#define	MS_TOGGLE_TIMEOUT_DISEN		0x01
+#define MS_NO_CHECK_INT			0x02
+
+/* MS_TRANS_CFG */
+#define	WAIT_INT			0x80
+#define	NO_WAIT_INT			0x00
+#define	NO_AUTO_READ_INT_REG		0x00
+#define	AUTO_READ_INT_REG		0x40
+#define	MS_CRC16_ERR			0x20
+#define	MS_RDY_TIMEOUT			0x10
+#define	MS_INT_CMDNK			0x08
+#define	MS_INT_BREQ			0x04
+#define	MS_INT_ERR			0x02
+#define	MS_INT_CED			0x01
+
+/* MS_TRANSFER */
+#define	MS_TRANSFER_START		0x80
+#define	MS_TRANSFER_END			0x40
+#define	MS_TRANSFER_ERR			0x20
+#define	MS_BS_STATE			0x10
+#define	MS_TM_READ_BYTES		0x00
+#define	MS_TM_NORMAL_READ		0x01
+#define	MS_TM_WRITE_BYTES		0x04
+#define	MS_TM_NORMAL_WRITE		0x05
+#define	MS_TM_AUTO_READ			0x08
+#define	MS_TM_AUTO_WRITE		0x0C
+#define MS_TM_SET_CMD			0x06
+#define MS_TM_COPY_PAGE			0x07
+#define MS_TM_MULTI_READ		0x02
+#define MS_TM_MULTI_WRITE		0x03
+
+/* MC_FIFO_CTL */
+#define FIFO_FLUSH			0x01
+
+/* MC_DMA_RST */
+#define DMA_RESET  0x01
+
+/* MC_DMA_CTL */
+#define DMA_TC_EQ_0			0x80
+#define DMA_DIR_TO_CARD			0x00
+#define DMA_DIR_FROM_CARD		0x02
+#define DMA_EN				0x01
+#define DMA_128				(0 << 2)
+#define DMA_256				(1 << 2)
+#define DMA_512				(2 << 2)
+#define DMA_1024			(3 << 2)
+#define DMA_PACK_SIZE_MASK		0x0C
+
+/* CARD_INT_PEND */
+#define XD_INT				0x10
+#define MS_INT				0x08
+#define SD_INT				0x04
+
+/* LED operations*/
+static inline int rtsx_usb_turn_on_led(struct rtsx_ucr *ucr)
+{
+	return  rtsx_usb_ep0_write_register(ucr, CARD_GPIO, 0x03, 0x02);
+}
+
+static inline int rtsx_usb_turn_off_led(struct rtsx_ucr *ucr)
+{
+	return rtsx_usb_ep0_write_register(ucr, CARD_GPIO, 0x03, 0x03);
+}
+
+/* HW error clearing */
+static inline void rtsx_usb_clear_fsm_err(struct rtsx_ucr *ucr)
+{
+	rtsx_usb_ep0_write_register(ucr, SFSM_ED, 0xf8, 0xf8);
+}
+
+static inline void rtsx_usb_clear_dma_err(struct rtsx_ucr *ucr)
+{
+	rtsx_usb_ep0_write_register(ucr, MC_FIFO_CTL,
+			FIFO_FLUSH, FIFO_FLUSH);
+	rtsx_usb_ep0_write_register(ucr, MC_DMA_RST, DMA_RESET, DMA_RESET);
+}
+#endif /* __RTS51139_H */

include/linux/mfd/tps65218.h

···
+/*
+ * linux/mfd/tps65218.h
+ *
+ * Functions to access TPS65219 power management chip.
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#ifndef __LINUX_MFD_TPS65218_H
+#define __LINUX_MFD_TPS65218_H
+
+#include <linux/i2c.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/bitops.h>
+
+/* TPS chip id list */
+#define TPS65218			0xF0
+
+/* I2C ID for TPS65218 part */
+#define TPS65218_I2C_ID			0x24
+
+/* All register addresses */
+#define TPS65218_REG_CHIPID		0x00
+#define TPS65218_REG_INT1		0x01
+#define TPS65218_REG_INT2		0x02
+#define TPS65218_REG_INT_MASK1		0x03
+#define TPS65218_REG_INT_MASK2		0x04
+#define TPS65218_REG_STATUS		0x05
+#define TPS65218_REG_CONTROL		0x06
+#define TPS65218_REG_FLAG		0x07
+
+#define TPS65218_REG_PASSWORD		0x10
+#define TPS65218_REG_ENABLE1		0x11
+#define TPS65218_REG_ENABLE2		0x12
+#define TPS65218_REG_CONFIG1		0x13
+#define TPS65218_REG_CONFIG2		0x14
+#define TPS65218_REG_CONFIG3		0x15
+#define TPS65218_REG_CONTROL_DCDC1	0x16
+#define TPS65218_REG_CONTROL_DCDC2	0x17
+#define TPS65218_REG_CONTROL_DCDC3	0x18
+#define TPS65218_REG_CONTROL_DCDC4	0x19
+#define TPS65218_REG_CONTRL_SLEW_RATE	0x1A
+#define TPS65218_REG_CONTROL_LDO1	0x1B
+#define TPS65218_REG_SEQ1		0x20
+#define TPS65218_REG_SEQ2		0x21
+#define TPS65218_REG_SEQ3		0x22
+#define TPS65218_REG_SEQ4		0x23
+#define TPS65218_REG_SEQ5		0x24
+#define TPS65218_REG_SEQ6		0x25
+#define TPS65218_REG_SEQ7		0x26
+
+/* Register field definitions */
+#define TPS65218_CHIPID_CHIP_MASK	0xF8
+#define TPS65218_CHIPID_REV_MASK	0x07
+
+#define TPS65218_INT1_VPRG		BIT(5)
+#define TPS65218_INT1_AC		BIT(4)
+#define TPS65218_INT1_PB		BIT(3)
+#define TPS65218_INT1_HOT		BIT(2)
+#define TPS65218_INT1_CC_AQC		BIT(1)
+#define TPS65218_INT1_PRGC		BIT(0)
+
+#define TPS65218_INT2_LS3_F		BIT(5)
+#define TPS65218_INT2_LS2_F		BIT(4)
+#define TPS65218_INT2_LS1_F		BIT(3)
+#define TPS65218_INT2_LS3_I		BIT(2)
+#define TPS65218_INT2_LS2_I		BIT(1)
+#define TPS65218_INT2_LS1_I		BIT(0)
+
+#define TPS65218_INT_MASK1_VPRG		BIT(5)
+#define TPS65218_INT_MASK1_AC		BIT(4)
+#define TPS65218_INT_MASK1_PB		BIT(3)
+#define TPS65218_INT_MASK1_HOT		BIT(2)
+#define TPS65218_INT_MASK1_CC_AQC	BIT(1)
+#define TPS65218_INT_MASK1_PRGC		BIT(0)
+
+#define TPS65218_INT_MASK2_LS3_F	BIT(5)
+#define TPS65218_INT_MASK2_LS2_F	BIT(4)
+#define TPS65218_INT_MASK2_LS1_F	BIT(3)
+#define TPS65218_INT_MASK2_LS3_I	BIT(2)
+#define TPS65218_INT_MASK2_LS2_I	BIT(1)
+#define TPS65218_INT_MASK2_LS1_I	BIT(0)
+
+#define TPS65218_STATUS_FSEAL		BIT(7)
+#define TPS65218_STATUS_EE		BIT(6)
+#define TPS65218_STATUS_AC_STATE	BIT(5)
+#define TPS65218_STATUS_PB_STATE	BIT(4)
+#define TPS65218_STATUS_STATE_MASK	0xC
+#define TPS65218_STATUS_CC_STAT		0x3
+
+#define TPS65218_CONTROL_OFFNPFO	BIT(1)
+#define TPS65218_CONTROL_CC_AQ	BIT(0)
+
+#define TPS65218_FLAG_GPO3_FLG		BIT(7)
+#define TPS65218_FLAG_GPO2_FLG		BIT(6)
+#define TPS65218_FLAG_GPO1_FLG		BIT(5)
+#define TPS65218_FLAG_LDO1_FLG		BIT(4)
+#define TPS65218_FLAG_DC4_FLG		BIT(3)
+#define TPS65218_FLAG_DC3_FLG		BIT(2)
+#define TPS65218_FLAG_DC2_FLG		BIT(1)
+#define TPS65218_FLAG_DC1_FLG		BIT(0)
+
+#define TPS65218_ENABLE1_DC6_EN		BIT(5)
+#define TPS65218_ENABLE1_DC5_EN		BIT(4)
+#define TPS65218_ENABLE1_DC4_EN		BIT(3)
+#define TPS65218_ENABLE1_DC3_EN		BIT(2)
+#define TPS65218_ENABLE1_DC2_EN		BIT(1)
+#define TPS65218_ENABLE1_DC1_EN		BIT(0)
+
+#define TPS65218_ENABLE2_GPIO3		BIT(6)
+#define TPS65218_ENABLE2_GPIO2		BIT(5)
+#define TPS65218_ENABLE2_GPIO1		BIT(4)
+#define TPS65218_ENABLE2_LS3_EN		BIT(3)
+#define TPS65218_ENABLE2_LS2_EN		BIT(2)
+#define TPS65218_ENABLE2_LS1_EN		BIT(1)
+#define TPS65218_ENABLE2_LDO1_EN	BIT(0)
+
+
+#define TPS65218_CONFIG1_TRST		BIT(7)
+#define TPS65218_CONFIG1_GPO2_BUF	BIT(6)
+#define TPS65218_CONFIG1_IO1_SEL	BIT(5)
+#define TPS65218_CONFIG1_PGDLY_MASK	0x18
+#define TPS65218_CONFIG1_STRICT		BIT(2)
+#define TPS65218_CONFIG1_UVLO_MASK	0x3
+
+#define TPS65218_CONFIG2_DC12_RST	BIT(7)
+#define TPS65218_CONFIG2_UVLOHYS	BIT(6)
+#define TPS65218_CONFIG2_LS3ILIM_MASK	0xC
+#define TPS65218_CONFIG2_LS2ILIM_MASK	0x3
+
+#define TPS65218_CONFIG3_LS3NPFO	BIT(5)
+#define TPS65218_CONFIG3_LS2NPFO	BIT(4)
+#define TPS65218_CONFIG3_LS1NPFO	BIT(3)
+#define TPS65218_CONFIG3_LS3DCHRG	BIT(2)
+#define TPS65218_CONFIG3_LS2DCHRG	BIT(1)
+#define TPS65218_CONFIG3_LS1DCHRG	BIT(0)
+
+#define TPS65218_CONTROL_DCDC1_PFM	BIT(7)
+#define TPS65218_CONTROL_DCDC1_MASK	0x7F
+
+#define TPS65218_CONTROL_DCDC2_PFM	BIT(7)
+#define TPS65218_CONTROL_DCDC2_MASK	0x3F
+
+#define TPS65218_CONTROL_DCDC3_PFM	BIT(7)
+#define TPS65218_CONTROL_DCDC3_MASK	0x3F
+
+#define TPS65218_CONTROL_DCDC4_PFM	BIT(7)
+#define TPS65218_CONTROL_DCDC4_MASK	0x3F
+
+#define TPS65218_SLEW_RATE_GO		BIT(7)
+#define TPS65218_SLEW_RATE_GODSBL	BIT(6)
+#define TPS65218_SLEW_RATE_SLEW_MASK	0x7
+
+#define TPS65218_CONTROL_LDO1_MASK	0x3F
+
+#define TPS65218_SEQ1_DLY8		BIT(7)
+#define TPS65218_SEQ1_DLY7		BIT(6)
+#define TPS65218_SEQ1_DLY6		BIT(5)
+#define TPS65218_SEQ1_DLY5		BIT(4)
+#define TPS65218_SEQ1_DLY4		BIT(3)
+#define TPS65218_SEQ1_DLY3		BIT(2)
+#define TPS65218_SEQ1_DLY2		BIT(1)
+#define TPS65218_SEQ1_DLY1		BIT(0)
+
+#define TPS65218_SEQ2_DLYFCTR		BIT(7)
+#define TPS65218_SEQ2_DLY9		BIT(0)
+
+#define TPS65218_SEQ3_DC2_SEQ_MASK	0xF0
+#define TPS65218_SEQ3_DC1_SEQ_MASK	0xF
+
+#define TPS65218_SEQ4_DC4_SEQ_MASK	0xF0
+#define TPS65218_SEQ4_DC3_SEQ_MASK	0xF
+
+#define TPS65218_SEQ5_DC6_SEQ_MASK	0xF0
+#define TPS65218_SEQ5_DC5_SEQ_MASK	0xF
+
+#define TPS65218_SEQ6_LS1_SEQ_MASK	0xF0
+#define TPS65218_SEQ6_LDO1_SEQ_MASK	0xF
+
+#define TPS65218_SEQ7_GPO3_SEQ_MASK	0xF0
+#define TPS65218_SEQ7_GPO1_SEQ_MASK	0xF
+#define TPS65218_PROTECT_NONE		0
+#define TPS65218_PROTECT_L1		1
+
+enum tps65218_regulator_id {
+	/* DCDC's */
+	TPS65218_DCDC_1,
+	TPS65218_DCDC_2,
+	TPS65218_DCDC_3,
+	TPS65218_DCDC_4,
+	TPS65218_DCDC_5,
+	TPS65218_DCDC_6,
+	/* LDOs */
+	TPS65218_LDO_1,
+};
+
+#define TPS65218_MAX_REG_ID		TPS65218_LDO_1
+
+/* Number of step-down converters available */
+#define TPS65218_NUM_DCDC		6
+/* Number of LDO voltage regulators available */
+#define TPS65218_NUM_LDO		1
+/* Number of total regulators available */
+#define TPS65218_NUM_REGULATOR		(TPS65218_NUM_DCDC + TPS65218_NUM_LDO)
+
+/* Define the TPS65218 IRQ numbers */
+enum tps65218_irqs {
+	/* INT1 registers */
+	TPS65218_PRGC_IRQ,
+	TPS65218_CC_AQC_IRQ,
+	TPS65218_HOT_IRQ,
+	TPS65218_PB_IRQ,
+	TPS65218_AC_IRQ,
+	TPS65218_VPRG_IRQ,
+	TPS65218_INVALID1_IRQ,
+	TPS65218_INVALID2_IRQ,
+	/* INT2 registers */
+	TPS65218_LS1_I_IRQ,
+	TPS65218_LS2_I_IRQ,
+	TPS65218_LS3_I_IRQ,
+	TPS65218_LS1_F_IRQ,
+	TPS65218_LS2_F_IRQ,
+	TPS65218_LS3_F_IRQ,
+	TPS65218_INVALID3_IRQ,
+	TPS65218_INVALID4_IRQ,
+};
+
+/**
+ * struct tps_info - packages regulator constraints
+ * @id:			Id of the regulator
+ * @name:		Voltage regulator name
+ * @min_uV:		minimum micro volts
+ * @max_uV:		minimum micro volts
+ *
+ * This data is used to check the regualtor voltage limits while setting.
+ */
+struct tps_info {
+	int id;
+	const char *name;
+	int min_uV;
+	int max_uV;
+};
+
+/**
+ * struct tps65218 - tps65218 sub-driver chip access routines
+ *
+ * Device data may be used to access the TPS65218 chip
+ */
+
+struct tps65218 {
+	struct device *dev;
+	unsigned int id;
+
+	struct mutex tps_lock;		/* lock guarding the data structure */
+	/* IRQ Data */
+	int irq;
+	u32 irq_mask;
+	struct regmap_irq_chip_data *irq_data;
+	struct regulator_desc desc[TPS65218_NUM_REGULATOR];
+	struct regulator_dev *rdev[TPS65218_NUM_REGULATOR];
+	struct tps_info *info[TPS65218_NUM_REGULATOR];
+	struct regmap *regmap;
+};
+
+int tps65218_reg_read(struct tps65218 *tps, unsigned int reg,
+					unsigned int *val);
+int tps65218_reg_write(struct tps65218 *tps, unsigned int reg,
+			unsigned int val, unsigned int level);
+int tps65218_set_bits(struct tps65218 *tps, unsigned int reg,
+		unsigned int mask, unsigned int val, unsigned int level);
+int tps65218_clear_bits(struct tps65218 *tps, unsigned int reg,
+		unsigned int mask, unsigned int level);
+
+#endif /*  __LINUX_MFD_TPS65218_H */

include/linux/ssbi.h

···
 int ssbi_write(struct device *dev, u16 addr, const u8 *buf, int len);
 int ssbi_read(struct device *dev, u16 addr, u8 *buf, int len);
 
+static inline int
+ssbi_reg_read(void *context, unsigned int reg, unsigned int *val)
+{
+	int ret;
+	u8 v;
+
+	ret = ssbi_read(context, reg, &v, 1);
+	if (!ret)
+		*val = v;
+
+	return ret;
+}
+
+static inline int
+ssbi_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+	u8 v = val;
+	return ssbi_write(context, reg, &v, 1);
+}
+
 #endif