Merge tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Samsung DT updates for v4.2

- for exyos3250
: use s3c6410-rtc instead of exynos3250-rtc
: add JPEG codec node and support it on exynos3250-rinato
: use s3c-rtc clock id for exynos3250-rinato and monk boards

- for exynos4
: add JPEG codec node and syscon property to MIPI DPHY
: remove obsolete MIPI DPHY reg property
: enable s3c-rtc on exynos4412-trats2

- for exynos5
: add syscon property to MIPI DPHY for exynos5420
: enable s3c-rtc on exynos5420-arndale-octa
: add missing irq pinctrl for max77686 on exynos5250-smdk5250

: clk: add bindings for 32kHz clocks from s2mps11
: fix pinctrl for s2mps11-irq on exynos5420-arndale-octa

- for exynos5422-odroidxu3
: add mmc detect gpio and LEDs
: add HS400 support, simple-audio-card and rtc_src clock

* tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: Add syscon property to the MIPI DPHY for exynos4415
ARM: dts: Remove obsolete MIPI DPHY 'reg' property for exynos4
ARM: dts: Use last parent for clocks during power domain on/off
ARM: dts: add support JPEG codec for exynos3250-rinato
ARM: dts: support simple-audio-card for exynos5420 and exynos5422-odroidxu3
ARM: dts: add jpeg-codec node for exynos4 and exynos4x12
ARM: dts: Enable S3C RTC on exynos4412-trats2 and exynos5420-arndale-octa
ARM: dts: Use define for s3c-rtc clock id for exynos3250-monk
ARM: dts: Use define for s3c-rtc clock id for exynos3250-rinato
ARM: dts: Use s3c6410-rtc instead of exynos3250-rtc for exynos3250/4415
ARM: dts: add 'rtc_src' clock to rtc node for exynos5422-odroidxu3
clk: samsung: Add bindings for 32kHz clocks from s2mps11
ARM: dts: fix pinctrl for s2mps11-irq on exynos5420-arndale-octa
ARM: dts: Add syscon property to the MIPI phy in exynos5420
ARM: dts: Add HS400 support for exynos5422-odroidxu3
ARM: dts: Add LEDs for exynos5422-odroidxu3
ARM: dts: add mmc detect gpio for exynos5422-odroidxu3
ARM: dts: add JPEG codec device node for exynos3250
ARM: dts: Add missing irq pinctrl for max77686 on smdk5250

Documentation/devicetree/bindings/rtc/s3c-rtc.txt

···
     * "samsung,s3c2416-rtc" - for controllers compatible with s3c2416 rtc.
     * "samsung,s3c2443-rtc" - for controllers compatible with s3c2443 rtc.
     * "samsung,s3c6410-rtc" - for controllers compatible with s3c6410 rtc.
-    * "samsung,exynos3250-rtc" - for controllers compatible with exynos3250 rtc.
+    * "samsung,exynos3250-rtc" - (deprecated) for controllers compatible with
+                                 exynos3250 rtc (use "samsung,s3c6410-rtc").
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: Two interrupt numbers to the cpu should be specified. First

arch/arm/boot/dts/exynos3250-monk.dts

···
 #include "exynos3250.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
 
 / {
 	model = "Samsung Monk board";
···
 };
 
 &rtc {
-	clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
+	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
 	clock-names = "rtc", "rtc_src";
 	status = "okay";
 };

arch/arm/boot/dts/exynos3250-rinato.dts

···
 #include "exynos3250.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
 
 / {
 	model = "Samsung Rinato board";
···
 	status = "okay";
 };
 
+&jpeg {
+	status = "okay";
+};
+
 &mshc_0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
···
 };
 
 &rtc {
-	clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
+	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
 	clock-names = "rtc", "rtc_src";
 	status = "okay";
 };

arch/arm/boot/dts/exynos3250.dtsi

···
 		};
 
 		rtc: rtc@10070000 {
-			compatible = "samsung,exynos3250-rtc";
+			compatible = "samsung,s3c6410-rtc";
 			reg = <0x10070000 0x100>;
 			interrupts = <0 73 0>, <0 74 0>;
 			interrupt-parent = <&pmu_system_controller>;
···
 			compatible = "samsung,exynos3250-pinctrl";
 			reg = <0x11400000 0x1000>;
 			interrupts = <0 240 0>;
+		};
+
+		jpeg: codec@11830000 {
+			compatible = "samsung,exynos3250-jpeg";
+			reg = <0x11830000 0x1000>;
+			interrupts = <0 171 0>;
+			clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>;
+			clock-names = "jpeg", "sclk";
+			power-domains = <&pd_cam>;
+			assigned-clocks = <&cmu CLK_MOUT_CAM_BLK>, <&cmu CLK_SCLK_JPEG>;
+			assigned-clock-rates = <0>, <150000000>;
+			assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>;
+			status = "disabled";
 		};
 
 		fimd: fimd@11c00000 {

arch/arm/boot/dts/exynos4.dtsi

···
 
 	mipi_phy: video-phy@10020710 {
 		compatible = "samsung,s5pv210-mipi-video-phy";
-		reg = <0x10020710 8>;
 		#phy-cells = <1>;
 		syscon = <&pmu_system_controller>;
 	};
···
 		status = "disabled";
 	};
 
-	rtc@10070000 {
+	rtc: rtc@10070000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupt-parent = <&pmu_system_controller>;
···
 
 	tmu: tmu@100C0000 {
 		#include "exynos4412-tmu-sensor-conf.dtsi"
+	};
+
+	jpeg-codec@11840000 {
+		compatible = "samsung,exynos4210-jpeg";
+		reg = <0x11840000 0x1000>;
+		interrupts = <0 88 0>;
+		clocks = <&clock CLK_JPEG>;
+		clock-names = "jpeg";
+		power-domains = <&pd_cam>;
 	};
 
 	hdmi: hdmi@12D00000 {

arch/arm/boot/dts/exynos4412-trats2.dts

···
 #include "exynos4412.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77686.h>
 
 / {
 	model = "Samsung Trats 2 based on Exynos4412";
···
 		pinctrl-names = "default";
 		status = "okay";
 
-		max77686_pmic@09 {
+		max77686: max77686_pmic@09 {
 			compatible = "maxim,max77686";
 			interrupt-parent = <&gpx0>;
 			interrupts = <7 0>;
···
 
 		PIN_SLP(gpv4-0, INPUT, DOWN);
 	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
 };

arch/arm/boot/dts/exynos4415.dtsi

···
 
 		mipi_phy: video-phy@10020710 {
 			compatible = "samsung,s5pv210-mipi-video-phy";
-			reg = <0x10020710 8>;
 			#phy-cells = <1>;
+			syscon = <&pmu_system_controller>;
 		};
 
 		pd_cam: cam-power-domain@10024000 {
···
 		};
 
 		rtc: rtc@10070000 {
-			compatible = "samsung,exynos3250-rtc";
+			compatible = "samsung,s3c6410-rtc";
 			reg = <0x10070000 0x100>;
 			interrupts = <0 73 0>, <0 74 0>;
 			status = "disabled";

arch/arm/boot/dts/exynos4x12.dtsi

···
 		status = "disabled";
 	};
 
+	jpeg-codec@11840000 {
+		compatible = "samsung,exynos4212-jpeg";
+	};
+
 	hdmi: hdmi@12D00000 {
 		compatible = "samsung,exynos4212-hdmi";
 	};

arch/arm/boot/dts/exynos5250-smdk5250.dts

···
 		reg = <0x09>;
 		interrupt-parent = <&gpx3>;
 		interrupts = <2 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77686_irq>;
+		wakeup-source;
 
 		voltage-regulators {
 			ldo1_reg: LDO1 {
···
 			label = "Kernel";
 			reg = <0x40000 0xc0000>;
 		};
+	};
+};
+
+&pinctrl_0 {
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
 	};
 };

arch/arm/boot/dts/exynos5420-arndale-octa.dts

···
 #include "exynos5420.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
 
 / {
 	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
···
 			compatible = "samsung,exynos5420-oscclk";
 			clock-frequency = <24000000>;
 		};
-	};
-
-	rtc@101E0000 {
-		status = "okay";
 	};
 
 	codec@11000000 {
···
 			s2mps11,buck4-ramp-enable = <1>;
 
 			interrupt-parent = <&gpx3>;
-			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&s2mps11_irq>;
 
 			s2mps11_osc: clocks {
 				#clock-cells = <1>;
···
 
 &cci {
 	status = "disabled";
+};
+
+&pinctrl_0 {
+	s2mps11_irq: s2mps11-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
 };

arch/arm/boot/dts/exynos5420.dtsi

···
 	mfc_pd: power-domain@10044060 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044060 0x20>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
-			<&clock CLK_MOUT_USER_ACLK333>;
-		clock-names = "oscclk", "pclk0", "clk0";
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>;
+		clock-names = "oscclk", "clk0";
 		#power-domain-cells = <0>;
 	};
 
···
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x100440C0 0x20>;
 		#power-domain-cells = <0>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK200>,
+		clocks = <&clock CLK_FIN_PLL>,
 			 <&clock CLK_MOUT_USER_ACLK200_DISP1>,
-			 <&clock CLK_MOUT_SW_ACLK300>,
 			 <&clock CLK_MOUT_USER_ACLK300_DISP1>,
-			 <&clock CLK_MOUT_SW_ACLK400>,
 			 <&clock CLK_MOUT_USER_ACLK400_DISP1>,
 			 <&clock CLK_FIMD1>, <&clock CLK_MIXER>;
-		clock-names = "oscclk", "pclk0", "clk0",
-			      "pclk1", "clk1", "pclk2", "clk2",
-			      "asb0", "asb1";
+		clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
 	};
 
 	pinctrl_0: pinctrl@13400000 {
···
 			<&clock_audss EXYNOS_I2S_BUS>,
 			<&clock_audss EXYNOS_SCLK_I2S>;
 		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+		#clock-cells = <1>;
+		clock-output-names = "i2s_cdclk0";
+		#sound-dai-cells = <1>;
 		samsung,idma-addr = <0x03000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_bus>;
···
 		dma-names = "tx", "rx";
 		clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
 		clock-names = "iis", "i2s_opclk0";
+		#clock-cells = <1>;
+		clock-output-names = "i2s_cdclk1";
+		#sound-dai-cells = <1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s1_bus>;
 		status = "disabled";
···
 		dma-names = "tx", "rx";
 		clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
 		clock-names = "iis", "i2s_opclk0";
+		#clock-cells = <1>;
+		clock-output-names = "i2s_cdclk2";
+		#sound-dai-cells = <1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2_bus>;
 		status = "disabled";
···
 
 	mipi_phy: video-phy@10040714 {
 		compatible = "samsung,s5pv210-mipi-video-phy";
-		reg = <0x10040714 12>;
+		syscon = <&pmu_system_controller>;
 		#phy-cells = <1>;
 	};
 

arch/arm/boot/dts/exynos5422-odroidxu3.dts

···
 */
 
 /dts-v1/;
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5800.dtsi"
 
 / {
···
 		};
 	};
 
-	rtc@101E0000 {
-		status = "okay";
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "blue:heartbeart";
+			gpios = <&gpb2 2 0>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		eMMC {
+			label = "green:eMMC";
+			gpios = <&gpb2 1 0>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		microSD {
+			label = "red:microSD";
+			gpios = <&gpx2 3 0>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
 	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "Odroid-XU3";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speakers", "Speakers";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Headphone Jack", "MICBIAS",
+			"IN1", "Headphone Jack",
+			"Speakers", "SPKL",
+			"Speakers", "SPKR";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0 0>;
+			system-clock-frequency = <19200000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&max98090>;
+			clocks = <&i2s0 CLK_I2S_CDCLK>;
+		};
+	};
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+			<&clock_audss EXYNOS_MOUT_I2S>,
+			<&clock_audss EXYNOS_DOUT_AUD_BUS>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>,
+			<&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-rates = <0>,
+			<0>,
+			<19200000>;
+};
+
+&hsi2c_5 {
+	status = "okay";
+	max98090: max98090@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 0>;
+		clocks = <&i2s0 CLK_I2S_CDCLK>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
 };
 
 &hdmi {
···
 &mmc_0 {
 	status = "okay";
 	mmc-pwrseq = <&emmc_pwrseq>;
-	broken-cd;
+	cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+	samsung,read-strobe-delay = <90>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
 };
 
 &mmc_2 {
···
 		reg = <0x45>;
 		shunt-resistor = <10000>;
 	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
 };

include/dt-bindings/clock/samsung,s2mps11.h

···
+/*
+ * Copyright (C) 2015 Markus Reichl
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clocks for the Samsung S2MPS11 PMIC.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S2MPS11_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S2MPS11_CLOCK_H
+
+/* Fixed rate clocks. */
+
+#define S2MPS11_CLK_AP		0
+#define S2MPS11_CLK_CP		1
+#define S2MPS11_CLK_BT		2
+
+/* Total number of clocks. */
+#define S2MPS11_CLKS_NUM		(S2MPS11_CLK_BT + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S2MPS11_CLOCK_H */