Merge tag 'bcm63138-v4' of http://github.com/brcm/linux into next/soc

Merge "ARM: BCM: Broadcom BCM63138 support" from Florian Fainelli:

This patchset adds very minimal support for the BCM63138 SoC which is
a xDSL SoC using a dual Cortex A9 CPU complex.

* tag 'bcm63138-v4' of http://github.com/brcm/linux:
MAINTAINERS: add entry for the Broadcom BCM63xx ARM SoCs
ARM: BCM63XX: add BCM963138DVT Reference platform DTS
ARM: BCM63XX: add BCM63138 minimal Device Tree
ARM: BCM63XX: add low-level UART debug support
ARM: BCM63XX: add basic support for the Broadcom BCM63138 DSL SoC

Conflicts:
arch/arm/Kconfig.debug

Signed-off-by: Arnd Bergmann <[e-mail]>

Documentation/devicetree/bindings/arm/bcm/bcm63138.txt

···
+Broadcom BCM63138 DSL System-on-a-Chip device tree bindings
+-----------------------------------------------------------
+
+Boards compatible with the BCM63138 DSL System-on-a-Chip should have the
+following properties:
+
+Required root node property:
+
+compatible: should be "brcm,bcm63138"

MAINTAINERS

···
 F:	arch/arm/boot/dts/bcm5301x.dtsi
 F:	arch/arm/boot/dts/bcm470*
 
+BROADCOM BCM63XX ARM ARCHITECTURE
+M:	Florian Fainelli <[e-mail]>
+L:	[e-mail]
+T:	git git://git.github.com/brcm/linux.git
+S:	Maintained
+F:	arch/arm/mach-bcm/bcm63xx.c
+F:	arch/arm/include/debug/bcm63xx.S
+
 BROADCOM BCM7XXX ARM ARCHITECTURE
 M:	Marc Carino <[e-mail]>
 M:	Brian Norris <[e-mail]>

arch/arm/Kconfig.debug

···
 		  mobile SoCs in the Kona family of chips (e.g. bcm28155,
 		  bcm11351, etc...)
 
+	config DEBUG_BCM63XX
+		bool "Kernel low-level debugging on BCM63XX UART"
+		depends on ARCH_BCM_63XX
+		select DEBUG_UART_BCM63XX
+
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
 		depends on ARCH_BERLIN
···
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
+	default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
 	default "mach/debug-macro.S"
 
 # Compatibility options for PL01x
···
 		ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
 		ARCH_IOP33X || ARCH_IXP4XX || \
 		ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
+
+# Compatibility options for BCM63xx
+config DEBUG_UART_BCM63XX
+	def_bool ARCH_BCM_63XX
 
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
···
 	default 0xffc02000 if DEBUG_SOCFPGA_UART
 	default 0xffd82340 if ARCH_IOP13XX
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
+	default 0xfffe8600 if DEBUG_UART_BCM63XX
 	default 0xfffff700 if ARCH_IOP33X
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_LL_UART_EFM32 || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
+		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+		DEBUG_UART_BCM63XX
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
···
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
+	default 0xfcfe8600 if DEBUG_UART_BCM63XX
 	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
 	default 0xfd000000 if ARCH_SPEAR13XX
 	default 0xfd012000 if ARCH_MV78XX0
···
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
+		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+		DEBUG_UART_BCM63XX
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"

arch/arm/boot/dts/Makefile

···
 dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
+dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
 dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
 	bcm21664-garnet.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \

arch/arm/boot/dts/bcm63138.dtsi

···
+/*
+ * Broadcom BCM63138 DSL SoCs Device Tree
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,bcm63138";
+	model = "Broadcom BCM63138 DSL SoC";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		uart0 = &serial0;
+		uart1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <500000000>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+	};
+
+	/* ARM bus */
+	axi@80000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x80000000 0x784000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		L2: cache-controller@1d000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x1d000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			cache-sets = <16>;
+			cache-size = <0x80000>;
+			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		scu: scu@1e000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x1e000 0x100>;
+		};
+
+		gic: interrupt-controller@1e100 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x1f000 0x1000
+				0x1e100 0x100>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+		};
+
+		global_timer: timer@1e200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x1e200 0x20>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		local_timer: local-timer@1e600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x1e600 0x20>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		twd_watchdog: watchdog@1e620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x1e620 0x20>;
+			interupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	/* Legacy UBUS base */
+	ubus@fffe8000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x8100>;
+
+		serial0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x1b>;
+			interrupts = <GIC_SPI 32 0>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		serial1: serial@620 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x620 0x1b>;
+			interrupts = <GIC_SPI 33 0>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+	};
+};

arch/arm/boot/dts/bcm963138dvt.dts

···
+/*
+ * Broadcom BCM63138 Reference Board DTS
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	compatible = "brcm,BCM963138DVT", "brcm,bcm63138";
+	model = "Broadcom BCM963138DVT";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory {
+		reg = <0x0 0x08000000>;
+	};
+
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};

arch/arm/include/debug/bcm63xx.S

···
+/*
+ * Broadcom BCM63xx low-level UART debug
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_bcm63xx.h>
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =CONFIG_DEBUG_UART_PHYS
+	ldr	\rv, =CONFIG_DEBUG_UART_VIRT
+	.endm
+
+	.macro	senduart, rd, rx
+	/* word access do not work */
+	strb	\rd, [\rx, #UART_FIFO_REG]
+	.endm
+
+	.macro	waituart, rd, rx
+1001:	ldr	\rd, [\rx, #UART_IR_REG]
+	tst	\rd, #(1 << UART_IR_TXEMPTY)
+	beq	1001b
+	.endm
+
+	.macro	busyuart, rd, rx
+1002:	ldr	\rd, [\rx, #UART_IR_REG]
+	tst	\rd, #(1 << UART_IR_TXTRESH)
+	beq	1002b
+	.endm

arch/arm/mach-bcm/Kconfig

···
 	  different SoC or with the older BCM47XX and BCM53XX based
 	  network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
 
+config ARCH_BCM_63XX
+	bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7
+	depends on MMU
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369 if SMP
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER
+	select CACHE_L2X0
+	select HAVE_ARM_ARCH_TIMER
+	select HAVE_ARM_TWD if SMP
+	select HAVE_ARM_SCU if SMP
+	select HAVE_SMP
+	help
+	  This enables support for systems based on Broadcom DSL SoCs.
+	  It currently supports the 'BCM63XX' ARM-based family, which includes
+	  the BCM63138 variant.
+
 config ARCH_BRCMSTB
 	bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7
 	depends on MMU

arch/arm/mach-bcm/Makefile

···
 # BCM5301X
 obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o
 
+# BCM63XXx
+obj-$(CONFIG_ARCH_BCM_63XX)	:= bcm63xx.o
+
 ifeq ($(CONFIG_ARCH_BRCMSTB),y)
 obj-y				+= brcmstb.o
 endif

arch/arm/mach-bcm/bcm63xx.c

···
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+
+static const char * const bcm63xx_dt_compat[] = {
+	"brcm,bcm63138",
+	NULL
+};
+
+DT_MACHINE_START(BCM63XXX_DT, "BCM63xx DSL SoC")
+	.dt_compat	= bcm63xx_dt_compat,
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+MACHINE_END