Merge remote-tracking branch 'agust/next' into next

<<
Please pull mpc5xxx patches for v3.9. The bestcomm driver is
moved to drivers/dma (so it will be usable for ColdFire).
mpc5121 now provides common dtsi file and existing mpc5121 device
trees use it. There are some minor clock init and sparse fixes
and updates for various 5200 device tree files from Grant. Some
fixes for bugs in the mpc5121 DIU driver are also included here
(Andrew Morton suggested to push them via my mpc5xxx tree).
>>

arch/powerpc/boot/dts/a3m071.dts

···
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+
 / {
 	model = "anonymous,a3m071";
 	compatible = "anonymous,a3m071";
···
 		reg = <0xf0000000 0x00000100>;
 		bus-frequency = <0>; /* From boot loader */
 		system-frequency = <0>; /* From boot loader */
-
-		timer@600 {
-			fsl,has-wdt;
-		};
 
 		spi@f00 {
 			status = "disabled";

arch/powerpc/boot/dts/a4m072.dts

···
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+
 / {
 	model = "anonymous,a4m072";
 	compatible = "anonymous,a4m072";
···
 			fsl,init-ext-48mhz-en = <0x0>;
 			fsl,init-fd-enable = <0x01>;
 			fsl,init-fd-counters = <0x3333>;
-		};
-
-		timer@600 {
-			fsl,has-wdt;
-		};
-
-		gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
 		};
 
 		spi@f00 {

arch/powerpc/boot/dts/cm5200.dts

···
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+
 / {
 	model = "schindler,cm5200";
 	compatible = "schindler,cm5200";
 
 	soc5200@f0000000 {
-		timer@600 {	// General Purpose Timer
-			fsl,has-wdt;
-		};
-
 		can@900 {
 			status = "disabled";
 		};

arch/powerpc/boot/dts/digsy_mtc.dts

···
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { gpio-controller; fsl,has-wdt; };
+&gpt1 { gpio-controller; };
+
 / {
 	model = "intercontrol,digsy-mtc";
 	compatible = "intercontrol,digsy-mtc";
···
 	};
 
 	soc5200@f0000000 {
-		timer@600 {	// General Purpose Timer
-			#gpio-cells = <2>;
-			fsl,has-wdt;
-			gpio-controller;
-		};
-
-		timer@610 {
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
 		rtc@800 {
 			status = "disabled";
 		};

arch/powerpc/boot/dts/lite5200b.dts

···
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+
 / {
 	model = "fsl,lite5200b";
 	compatible = "fsl,lite5200b";
+
+	leds {
+		compatible = "gpio-leds";
+		tmr2 {
+			gpios = <&gpt2 0 1>;
+		};
+		tmr3 {
+			gpios = <&gpt3 0 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		led1 { gpios = <&gpio_wkup 2 1>; };
+		led2 { gpios = <&gpio_simple 3 1>; };
+		led3 { gpios = <&gpio_wkup 3 1>; };
+		led4 { gpios = <&gpio_simple 2 1>; };
+	};
 
 	memory {
 		reg = <0x00000000 0x10000000>;	// 256MB
 	};
 
 	soc5200@f0000000 {
-		timer@600 {	// General Purpose Timer
-			fsl,has-wdt;
-		};
-
 		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <0>;

arch/powerpc/boot/dts/media5200.dts

···
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+
 / {
 	model = "fsl,media5200";
 	compatible = "fsl,media5200";
···
 
 	soc5200@f0000000 {
 		bus-frequency = <132000000>;// 132 MHz
-
-		timer@600 {	// General Purpose Timer
-			fsl,has-wdt;
-		};
 
 		psc@2000 {	// PSC1
 			status = "disabled";

arch/powerpc/boot/dts/motionpro.dts

···
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt6 { // Motion-PRO status LED
+	compatible = "promess,motionpro-led";
+	label = "motionpro-statusled";
+	blink-delay = <100>; // 100 msec
+};
+&gpt7 { // Motion-PRO ready LED
+	compatible = "promess,motionpro-led";
+	label = "motionpro-readyled";
+};
+
 / {
 	model = "promess,motionpro";
 	compatible = "promess,motionpro";
 
 	soc5200@f0000000 {
-		timer@600 {	// General Purpose Timer
-			fsl,has-wdt;
-		};
-
-		timer@660 {	// Motion-PRO status LED
-			compatible = "promess,motionpro-led";
-			label = "motionpro-statusled";
-			blink-delay = <100>; // 100 msec
-		};
-
-		timer@670 {	// Motion-PRO ready LED
-			compatible = "promess,motionpro-led";
-			label = "motionpro-readyled";
-		};
-
 		can@900 {
 			status = "disabled";
 		};

arch/powerpc/boot/dts/mpc5121.dtsi

···
+/*
+ * base MPC5121 Device Tree Source
+ *
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "mpc5121";
+	compatible = "fsl,mpc5121";
+	#address-cells = <1>;
+	#size-cells = <1>;
+        interrupt-parent = <&ipic>;
+
+	aliases {
+		ethernet0 = &eth0;
+		pci = &pci;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5121@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <0x20>;	/* 32 bytes */
+			i-cache-line-size = <0x20>;	/* 32 bytes */
+			d-cache-size = <0x8000>;	/* L1, 32K */
+			i-cache-size = <0x8000>;	/* L1, 32K */
+			timebase-frequency = <49500000>;/* 49.5 MHz (csb/4) */
+			bus-frequency = <198000000>;	/* 198 MHz csb bus */
+			clock-frequency = <396000000>;	/* 396 MHz ppc core */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	/* 256MB at 0 */
+	};
+
+	mbx@20000000 {
+		compatible = "fsl,mpc5121-mbx";
+		reg = <0x20000000 0x4000>;
+		interrupts = <66 0x8>;
+	};
+
+	sram@30000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x30000000 0x20000>;	/* 128K at 0x30000000 */
+	};
+
+	nfc@40000000 {
+		compatible = "fsl,mpc5121-nfc";
+		reg = <0x40000000 0x100000>;	/* 1M at 0x40000000 */
+		interrupts = <6 8>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	localbus@80000020 {
+		compatible = "fsl,mpc5121-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0x80000020 0x40>;
+		interrupts = <7 0x8>;
+		ranges = <0x0 0x0 0xfc000000 0x04000000>;
+	};
+
+	soc@80000000 {
+		compatible = "fsl,mpc5121-immr";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		ranges = <0x0 0x80000000 0x400000>;
+		reg = <0x80000000 0x400000>;
+		bus-frequency = <66000000>;	/* 66 MHz ips bus */
+
+
+		/*
+		 * IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@c00 {
+			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0xc00 0x100>;
+		};
+
+		/* Watchdog timer */
+		wdt@900 {
+			compatible = "fsl,mpc5121-wdt";
+			reg = <0x900 0x100>;
+		};
+
+		/* Real time clock */
+		rtc@a00 {
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+		};
+
+		/* Reset module */
+		reset@e00 {
+			compatible = "fsl,mpc5121-reset";
+			reg = <0xe00 0x100>;
+		};
+
+		/* Clock control */
+		clock@f00 {
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+		};
+
+		/* Power Management Controller */
+		pmc@1000{
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x8>;
+		};
+
+		gpio@1100 {
+			compatible = "fsl,mpc5121-gpio";
+			reg = <0x1100 0x100>;
+			interrupts = <78 0x8>;
+		};
+
+		can@1300 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x1300 0x80>;
+			interrupts = <12 0x8>;
+		};
+
+		can@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x1380 0x80>;
+			interrupts = <13 0x8>;
+		};
+
+		sdhc@1500 {
+			compatible = "fsl,mpc5121-sdhc";
+			reg = <0x1500 0x100>;
+			interrupts = <8 0x8>;
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1700 0x20>;
+			interrupts = <9 0x8>;
+		};
+
+		i2c@1720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1720 0x20>;
+			interrupts = <10 0x8>;
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1740 0x20>;
+			interrupts = <11 0x8>;
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		axe@2000 {
+			compatible = "fsl,mpc5121-axe";
+			reg = <0x2000 0x100>;
+			interrupts = <42 0x8>;
+		};
+
+		display@2100 {
+			compatible = "fsl,mpc5121-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+		};
+
+		can@2300 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x2300 0x80>;
+			interrupts = <90 0x8>;
+		};
+
+		can@2380 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x2380 0x80>;
+			interrupts = <91 0x8>;
+		};
+
+		viu@2400 {
+			compatible = "fsl,mpc5121-viu";
+			reg = <0x2400 0x400>;
+			interrupts = <67 0x8>;
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x800>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		eth0: ethernet@2800 {
+			device_type = "network";
+			compatible = "fsl,mpc5121-fec";
+			reg = <0x2800 0x800>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+		};
+
+		/* USB1 using external ULPI PHY */
+		usb@3000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x3000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <43 0x8>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		/* USB0 using internal UTMI PHY */
+		usb@4000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x4000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <44 0x8>;
+			dr_mode = "otg";
+			phy_type = "utmi_wide";
+		};
+
+		/* IO control */
+		ioctl@a000 {
+			compatible = "fsl,mpc5121-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		/* LocalPlus controller */
+		lpc@10000 {
+			compatible = "fsl,mpc5121-lpc";
+			reg = <0x10000 0x200>;
+		};
+
+		pata@10200 {
+			compatible = "fsl,mpc5121-pata";
+			reg = <0x10200 0x100>;
+			interrupts = <5 0x8>;
+		};
+
+		/* 512x PSCs are not 52xx PSC compatible */
+
+		/* PSC0 */
+		psc@11000 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11000 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC1 */
+		psc@11100 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11100 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC2 */
+		psc@11200 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11200 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC3 */
+		psc@11300 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			reg = <0x11300 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC4 */
+		psc@11400 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			reg = <0x11400 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC5 */
+		psc@11500 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11500 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC6 */
+		psc@11600 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11600 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC7 */
+		psc@11700 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11700 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC8 */
+		psc@11800 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11800 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC9 */
+		psc@11900 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11900 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC10 */
+		psc@11a00 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11a00 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC11 */
+		psc@11b00 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11b00 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		pscfifo@11f00 {
+			compatible = "fsl,mpc5121-psc-fifo";
+			reg = <0x11f00 0x100>;
+			interrupts = <40 0x8>;
+		};
+
+		dma@14000 {
+			compatible = "fsl,mpc5121-dma";
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+		};
+	};
+
+	pci: pci@80008500 {
+		compatible = "fsl,mpc5121-pci";
+		device_type = "pci";
+		interrupts = <1 0x8>;
+		clock-frequency = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+
+		reg = <0x80008500 0x100	/* internal registers */
+		       0x80008300 0x8>;	/* config space access registers */
+		bus-range = <0x0 0x0>;
+		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
+	};
+};

arch/powerpc/boot/dts/mpc5121ads.dts

···
 /*
  * MPC5121E ADS Device Tree Source
  *
- * Copyright 2007,2008 Freescale Semiconductor Inc.
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
···
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5121.dtsi"
 
 / {
 	model = "mpc5121ads";
 	compatible = "fsl,mpc5121ads";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		pci = &pci;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5121@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <0x20>;	// 32 bytes
-			i-cache-line-size = <0x20>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
-			bus-frequency = <198000000>;	// 198 MHz csb bus
-			clock-frequency = <396000000>;	// 396 MHz ppc core
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;	// 256MB at 0
-	};
-
-	mbx@20000000 {
-		compatible = "fsl,mpc5121-mbx";
-		reg = <0x20000000 0x4000>;
-		interrupts = <66 0x8>;
-		interrupt-parent = < &ipic >;
-	};
-
-	sram@30000000 {
-		compatible = "fsl,mpc5121-sram";
-		reg = <0x30000000 0x20000>;		// 128K at 0x30000000
-	};
 
 	nfc@40000000 {
-		compatible = "fsl,mpc5121-nfc";
-		reg = <0x40000000 0x100000>;	// 1M at 0x40000000
-		interrupts = <6 8>;
-		interrupt-parent = < &ipic >;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		// ADS has two Hynix 512MB Nand flash chips in a single
-		// stacked package.
+		/*
+		 * ADS has two Hynix 512MB Nand flash chips in a single
+		 * stacked package.
+		 */
 		chips = <2>;
+
 		nand@0 {
 			label = "nand";
-			reg = <0x00000000 0x40000000>;	// 512MB + 512MB
+			reg = <0x00000000 0x40000000>;	/* 512MB + 512MB */
 		};
 	};
 
 	localbus@80000020 {
-		compatible = "fsl,mpc5121-localbus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0x80000020 0x40>;
-
 		ranges = <0x0 0x0 0xfc000000 0x04000000
 			  0x2 0x0 0x82000000 0x00008000>;
 
···
 			#size-cells = <1>;
 			bank-width = <4>;
 			device-width = <2>;
+
 			protected@0 {
 				label = "protected";
 				reg = <0x00000000 0x00040000>;  // first sector is protected
···
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			reg = <0x2 0xa 0x5>;
-			interrupt-parent = < &ipic >;
-			// irq routing
-			//	all irqs but touch screen are routed to irq0 (ipic 48)
-			//	touch screen is statically routed to irq1 (ipic 17)
-			//	so don't use it here
+			/* irq routing:
+			 * all irqs but touch screen are routed to irq0 (ipic 48)
+			 * touch screen is statically routed to irq1 (ipic 17)
+			 * so don't use it here
+			 */
 			interrupts = <48 0x8>;
 		};
 	};
 
 	soc@80000000 {
-		compatible = "fsl,mpc5121-immr";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <2>;
-		ranges = <0x0 0x80000000 0x400000>;
-		reg = <0x80000000 0x400000>;
-		bus-frequency = <66000000>;	// 66 MHz ips bus
-
-
-		// IPIC
-		// interrupts cell = <intr #, sense>
-		// sense values match linux IORESOURCE_IRQ_* defines:
-		// sense == 8: Level, low assertion
-		// sense == 2: Edge, high-to-low change
-		//
-		ipic: interrupt-controller@c00 {
-			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0xc00 0x100>;
-		};
-
-		rtc@a00 {	// Real time clock
-			compatible = "fsl,mpc5121-rtc";
-			reg = <0xa00 0x100>;
-			interrupts = <79 0x8 80 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-		reset@e00 {	// Reset module
-			compatible = "fsl,mpc5121-reset";
-			reg = <0xe00 0x100>;
-		};
-
-		clock@f00 {	// Clock control
-			compatible = "fsl,mpc5121-clock";
-			reg = <0xf00 0x100>;
-		};
-
-		pmc@1000{  //Power Management Controller
-			compatible = "fsl,mpc5121-pmc";
-			reg = <0x1000 0x100>;
-			interrupts = <83 0x2>;
-			interrupt-parent = < &ipic >;
-		};
-
-		gpio@1100 {
-			compatible = "fsl,mpc5121-gpio";
-			reg = <0x1100 0x100>;
-			interrupts = <78 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-		can@1300 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <12 0x8>;
-			interrupt-parent = < &ipic >;
-			reg = <0x1300 0x80>;
-		};
-
-		can@1380 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <13 0x8>;
-			interrupt-parent = < &ipic >;
-			reg = <0x1380 0x80>;
-		};
 
 		i2c@1700 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1700 0x20>;
-			interrupts = <9 0x8>;
-			interrupt-parent = < &ipic >;
 			fsl,preserve-clocking;
 
 			hwmon@4a {
···
 			};
 		};
 
-		i2c@1720 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1720 0x20>;
-			interrupts = <10 0x8>;
-			interrupt-parent = < &ipic >;
+		eth0: ethernet@2800 {
+			phy-handle = <&phy0>;
 		};
 
-		i2c@1740 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1740 0x20>;
-			interrupts = <11 0x8>;
-			interrupt-parent = < &ipic >;
+		can@2300 {
+			status = "disabled";
 		};
 
-		i2ccontrol@1760 {
-			compatible = "fsl,mpc5121-i2c-ctrl";
-			reg = <0x1760 0x8>;
+		can@2380 {
+			status = "disabled";
 		};
 
-		axe@2000 {
-			compatible = "fsl,mpc5121-axe";
-			reg = <0x2000 0x100>;
-			interrupts = <42 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-		display@2100 {
-			compatible = "fsl,mpc5121-diu";
-			reg = <0x2100 0x100>;
-			interrupts = <64 0x8>;
-			interrupt-parent = < &ipic >;
+		viu@2400 {
+			status = "disabled";
 		};
 
 		mdio@2800 {
-			compatible = "fsl,mpc5121-fec-mdio";
-			reg = <0x2800 0x800>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy: ethernet-phy@0 {
+			phy0: ethernet-phy@0 {
 				reg = <1>;
-				device_type = "ethernet-phy";
 			};
 		};
 
-		ethernet@2800 {
-			device_type = "network";
-			compatible = "fsl,mpc5121-fec";
-			reg = <0x2800 0x800>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <4 0x8>;
-			interrupt-parent = < &ipic >;
-			phy-handle = < &phy >;
-			fsl,align-tx-packets = <4>;
+		/* mpc5121ads only uses USB0 */
+		usb@3000 {
+			status = "disabled";
 		};
 
-		// 5121e has two dr usb modules
-		// mpc5121_ads only uses USB0
-
-		// USB1 using external ULPI PHY
-		//usb@3000 {
-		//	compatible = "fsl,mpc5121-usb2-dr";
-		//	reg = <0x3000 0x1000>;
-		//	#address-cells = <1>;
-		//	#size-cells = <0>;
-		//	interrupt-parent = < &ipic >;
-		//	interrupts = <43 0x8>;
-		//	dr_mode = "otg";
-		//	phy_type = "ulpi";
-		//};
-
-		// USB0 using internal UTMI PHY
+		/* USB0 using internal UTMI PHY */
 		usb@4000 {
-			compatible = "fsl,mpc5121-usb2-dr";
-			reg = <0x4000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = < &ipic >;
-			interrupts = <44 0x8>;
-			dr_mode = "otg";
-			phy_type = "utmi_wide";
+			dr_mode = "host";
 			fsl,invert-drvvbus;
 			fsl,invert-pwr-fault;
 		};
 
-		// IO control
-		ioctl@a000 {
-			compatible = "fsl,mpc5121-ioctl";
-			reg = <0xA000 0x1000>;
-		};
-
-		pata@10200 {
-			compatible = "fsl,mpc5121-pata";
-			reg = <0x10200 0x100>;
-			interrupts = <5 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-		// 512x PSCs are not 52xx PSC compatible
-		// PSC3 serial port A aka ttyPSC0
-		serial@11300 {
-			device_type = "serial";
+		/* PSC3 serial port A aka ttyPSC0 */
+		psc@11300 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			// Logical port assignment needed until driver
-			// learns to use aliases
-			port-number = <0>;
-			cell-index = <3>;
-			reg = <0x11300 0x100>;
-			interrupts = <40 0x8>;
-			interrupt-parent = < &ipic >;
-			rx-fifo-size = <16>;
-			tx-fifo-size = <16>;
 		};
 
-		// PSC4 serial port B aka ttyPSC1
-		serial@11400 {
-			device_type = "serial";
+		/* PSC4 serial port B aka ttyPSC1 */
+		psc@11400 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			// Logical port assignment needed until driver
-			// learns to use aliases
-			port-number = <1>;
-			cell-index = <4>;
-			reg = <0x11400 0x100>;
-			interrupts = <40 0x8>;
-			interrupt-parent = < &ipic >;
-			rx-fifo-size = <16>;
-			tx-fifo-size = <16>;
 		};
 
-		// PSC5 in ac97 mode
-		ac97@11500 {
+		/* PSC5 in ac97 mode */
+		ac97: psc@11500 {
 			compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
-			cell-index = <5>;
-			reg = <0x11500 0x100>;
-			interrupts = <40 0x8>;
-			interrupt-parent = < &ipic >;
 			fsl,mode = "ac97-slave";
-			rx-fifo-size = <384>;
-			tx-fifo-size = <384>;
+			fsl,rx-fifo-size = <384>;
+			fsl,tx-fifo-size = <384>;
 		};
-
-		pscfifo@11f00 {
-			compatible = "fsl,mpc5121-psc-fifo";
-			reg = <0x11f00 0x100>;
-			interrupts = <40 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-		dma@14000 {
-			compatible = "fsl,mpc5121-dma";
-			reg = <0x14000 0x1800>;
-			interrupts = <65 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
 	};
 
 	pci: pci@80008500 {
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
-				// IDSEL 0x15 - Slot 1 PCI
+				/* IDSEL 0x15 - Slot 1 PCI */
 				 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
 				 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
 				 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
 				 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
 
-				// IDSEL 0x16 - Slot 2 MiniPCI
+				/* IDSEL 0x16 - Slot 2 MiniPCI */
 				 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
 				 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
 
-				// IDSEL 0x17 - Slot 3 MiniPCI
+				/* IDSEL 0x17 - Slot 3 MiniPCI */
 				 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
 				 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
 				>;
-		interrupt-parent = < &ipic >;
-		interrupts = <1 0x8>;
-		bus-range = <0 0>;
-		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
-			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
-		clock-frequency = <0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0x80008500 0x100		/* internal registers */
-		       0x80008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc5121-pci";
-		device_type = "pci";
 	};
 };

arch/powerpc/boot/dts/mpc5200b.dtsi

···
 			reg = <0x500 0x80>;
 		};
 
-		timer@600 {	// General Purpose Timer
+		gpt0: timer@600 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x600 0x10>;
 			interrupts = <1 9 0>;
+			// add 'fsl,has-wdt' to enable watchdog
 		};
 
-		timer@610 {	// General Purpose Timer
+		gpt1: timer@610 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x610 0x10>;
 			interrupts = <1 10 0>;
 		};
 
-		timer@620 {	// General Purpose Timer
+		gpt2: timer@620 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x620 0x10>;
 			interrupts = <1 11 0>;
 		};
 
-		timer@630 {	// General Purpose Timer
+		gpt3: timer@630 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x630 0x10>;
 			interrupts = <1 12 0>;
 		};
 
-		timer@640 {	// General Purpose Timer
+		gpt4: timer@640 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x640 0x10>;
 			interrupts = <1 13 0>;
 		};
 
-		timer@650 {	// General Purpose Timer
+		gpt5: timer@650 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x650 0x10>;
 			interrupts = <1 14 0>;
 		};
 
-		timer@660 {	// General Purpose Timer
+		gpt6: timer@660 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x660 0x10>;
 			interrupts = <1 15 0>;
 		};
 
-		timer@670 {	// General Purpose Timer
+		gpt7: timer@670 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x670 0x10>;
 			interrupts = <1 16 0>;
 		};

arch/powerpc/boot/dts/mucmc52.dts

···
 
 /include/ "mpc5200b.dtsi"
 
+/* Timer pins that need to be in GPIO mode */
+&gpt0 { gpio-controller; };
+&gpt1 { gpio-controller; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+
+/* Disabled timers */
+&gpt4 { status = "disabled"; };
+&gpt5 { status = "disabled"; };
+&gpt6 { status = "disabled"; };
+&gpt7 { status = "disabled"; };
+
 / {
 	model = "manroland,mucmc52";
 	compatible = "manroland,mucmc52";
 
 	soc5200@f0000000 {
-		gpt0: timer@600 {	// GPT 0 in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		timer@640 {
-			status = "disabled";
-		};
-
-		timer@650 {
-			status = "disabled";
-		};
-
-		timer@660 {
-			status = "disabled";
-		};
-
-		timer@670 {
-			status = "disabled";
-		};
-
 		rtc@800 {
 			status = "disabled";
 		};

arch/powerpc/boot/dts/o2d.dtsi

···
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 {
+	gpio-controller;
+	fsl,has-wdt;
+	fsl,wdt-on-boot = <0>;
+};
+&gpt1 { gpio-controller; };
+
 / {
 	model = "ifm,o2d";
 	compatible = "ifm,o2d";
···
 	};
 
 	soc5200@f0000000 {
-
-		gpio_simple: gpio@b00 {
-		};
-
-		timer@600 {	// General Purpose Timer
-			#gpio-cells = <2>;
-			gpio-controller;
-			fsl,has-wdt;
-			fsl,wdt-on-boot = <0>;
-		};
-
-		timer@610 {
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		timer7: timer@670 {
-		};
 
 		rtc@800 {
 			status = "disabled";
···
 		csi@3,0 {
 			compatible = "ifm,o2d-csi";
 			reg = <3 0 0x00100000>;
-			ifm,csi-clk-handle = <&timer7>;
+			ifm,csi-clk-handle = <&gpt7>;
 			gpios = <&gpio_simple 23 0	/* imag_capture */
 				 &gpio_simple 26 0	/* imag_reset */
 				 &gpio_simple 29 0>;	/* imag_master_en */

arch/powerpc/boot/dts/pcm030.dts

···
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
 / {
 	model = "phytec,pcm030";
 	compatible = "phytec,pcm030";
 
 	soc5200@f0000000 {
-		timer@600 {		// General Purpose Timer
-			fsl,has-wdt;
-		};
-
-		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
 		audioplatform: psc@2000 { /* PSC1 in ac97 mode */
 			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
 			cell-index = <0>;

arch/powerpc/boot/dts/pcm032.dts

···
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
 / {
 	model = "phytec,pcm032";
 	compatible = "phytec,pcm032";
···
 	};
 
 	soc5200@f0000000 {
-		timer@600 {		// General Purpose Timer
-			fsl,has-wdt;
-		};
-
-		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
 		psc@2000 {	/* PSC1 is ac97 */
 			compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
 			cell-index = <0>;

arch/powerpc/boot/dts/pdm360ng.dts

···
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5121.dtsi"
 
 / {
 	model = "pdm360ng";
···
 	#size-cells = <1>;
 	interrupt-parent = <&ipic>;
 
-	aliases {
-		ethernet0 = &eth0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5121@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <0x20>;	// 32 bytes
-			i-cache-line-size = <0x20>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
-			bus-frequency = <198000000>;	// 198 MHz csb bus
-			clock-frequency = <396000000>;	// 396 MHz ppc core
-		};
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>;	// 512MB at 0
 	};
 
 	nfc@40000000 {
-		compatible = "fsl,mpc5121-nfc";
-		reg = <0x40000000 0x100000>;
-		interrupts = <0x6 0x8>;
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
 		bank-width = <0x1>;
 		chips = <0x1>;
 
···
 		};
 	};
 
-	sram@50000000 {
-		compatible = "fsl,mpc5121-sram";
-		reg = <0x50000000 0x20000>;	// 128K at 0x50000000
-	};
-
 	localbus@80000020 {
-		compatible = "fsl,mpc5121-localbus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0x80000020 0x40>;
-
 		ranges = <0x0 0x0 0xf0000000 0x10000000   /* Flash */
 			  0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */
 
···
 	};
 
 	soc@80000000 {
-		compatible = "fsl,mpc5121-immr";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <2>;
-		ranges = <0x0 0x80000000 0x400000>;
-		reg = <0x80000000 0x400000>;
-		bus-frequency = <66000000>;	// 66 MHz ips bus
-
-		// IPIC
-		// interrupts cell = <intr #, sense>
-		// sense values match linux IORESOURCE_IRQ_* defines:
-		// sense == 8: Level, low assertion
-		// sense == 2: Edge, high-to-low change
-		//
-		ipic: interrupt-controller@c00 {
-			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0xc00 0x100>;
-		};
-
-		rtc@a00 {	// Real time clock
-			compatible = "fsl,mpc5121-rtc";
-			reg = <0xa00 0x100>;
-			interrupts = <79 0x8 80 0x8>;
-		};
-
-		reset@e00 {	// Reset module
-			compatible = "fsl,mpc5121-reset";
-			reg = <0xe00 0x100>;
-		};
-
-		clock@f00 {	// Clock control
-			compatible = "fsl,mpc5121-clock";
-			reg = <0xf00 0x100>;
-		};
-
-		pmc@1000{	//Power Management Controller
-			compatible = "fsl,mpc5121-pmc";
-			reg = <0x1000 0x100>;
-			interrupts = <83 0x2>;
-		};
-
-		gpio@1100 {
-			compatible = "fsl,mpc5121-gpio";
-			reg = <0x1100 0x100>;
-			interrupts = <78 0x8>;
-		};
-
-		can@1300 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <12 0x8>;
-			reg = <0x1300 0x80>;
-		};
-
-		can@1380 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <13 0x8>;
-			reg = <0x1380 0x80>;
-		};
 
 		i2c@1700 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c";
-			reg = <0x1700 0x20>;
-			interrupts = <0x9 0x8>;
 			fsl,preserve-clocking;
 
 			eeprom@50 {
···
 			};
 		};
 
+		i2c@1720 {
+			status = "disabled";
+		};
+
 		i2c@1740 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c";
-			reg = <0x1740 0x20>;
-			interrupts = <0xb 0x8>;
 			fsl,preserve-clocking;
 		};
 
-		i2ccontrol@1760 {
-			compatible = "fsl,mpc5121-i2c-ctrl";
-			reg = <0x1760 0x8>;
-		};
-
-		axe@2000 {
-			compatible = "fsl,mpc5121-axe";
-			reg = <0x2000 0x100>;
-			interrupts = <42 0x8>;
-		};
-
-		display@2100 {
-			compatible = "fsl,mpc5121-diu";
-			reg = <0x2100 0x100>;
-			interrupts = <64 0x8>;
-		};
-
-		can@2300 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <90 0x8>;
-			reg = <0x2300 0x80>;
-		};
-
-		can@2380 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <91 0x8>;
-			reg = <0x2380 0x80>;
-		};
-
-		viu@2400 {
-			compatible = "fsl,mpc5121-viu";
-			reg = <0x2400 0x400>;
-			interrupts = <67 0x8>;
+		ethernet@2800 {
+			phy-handle = <&phy0>;
 		};
 
 		mdio@2800 {
-			compatible = "fsl,mpc5121-fec-mdio";
-			reg = <0x2800 0x200>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy: ethernet-phy@0 {
+			phy0: ethernet-phy@1f {
 				compatible = "smsc,lan8700";
 				reg = <0x1f>;
 			};
 		};
 
-		eth0: ethernet@2800 {
-			compatible = "fsl,mpc5121-fec";
-			reg = <0x2800 0x200>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <4 0x8>;
-			phy-handle = < &phy >;
-		};
-
-		// USB1 using external ULPI PHY
+		/* USB1 using external ULPI PHY */
 		usb@3000 {
-			compatible = "fsl,mpc5121-usb2-dr";
-			reg = <0x3000 0x600>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <43 0x8>;
 			dr_mode = "host";
-			phy_type = "ulpi";
 		};
 
-		// USB0 using internal UTMI PHY
+		/* USB0 using internal UTMI PHY */
 		usb@4000 {
-			compatible = "fsl,mpc5121-usb2-dr";
-			reg = <0x4000 0x600>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <44 0x8>;
-			dr_mode = "otg";
-			phy_type = "utmi_wide";
 			fsl,invert-pwr-fault;
 		};
 
-		// IO control
-		ioctl@a000 {
-			compatible = "fsl,mpc5121-ioctl";
-			reg = <0xA000 0x1000>;
-		};
-
-		// 512x PSCs are not 52xx PSCs compatible
-		serial@11000 {
+		psc@11000 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <0>;
-			reg = <0x11000 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11100 {
+		psc@11100 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <1>;
-			reg = <0x11100 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11200 {
+		psc@11200 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <2>;
-			reg = <0x11200 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11300 {
+		psc@11300 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <3>;
-			reg = <0x11300 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11400 {
+		psc@11400 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <4>;
-			reg = <0x11400 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11600 {
+		psc@11500 {
+			status = "disabled";
+		};
+
+		psc@11600 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <6>;
-			reg = <0x11600 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11800 {
+		psc@11700 {
+			status = "disabled";
+		};
+
+		psc@11800 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <8>;
-			reg = <0x11800 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11B00 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <11>;
-			reg = <0x11B00 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-		};
-
-		pscfifo@11f00 {
-			compatible = "fsl,mpc5121-psc-fifo";
-			reg = <0x11f00 0x100>;
-			interrupts = <40 0x8>;
-		};
-
-		spi@11900 {
+		psc@11900 {
 			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
-			cell-index = <9>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x11900 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 
-			// 7845 touch screen controller
+			/* ADS7845 touch screen controller */
 			ts@0 {
 				compatible = "ti,ads7846";
 				reg = <0x0>;
 				spi-max-frequency = <3000000>;
-				// pen irq is GPIO25
+				/* pen irq is GPIO25 */
 				interrupts = <78 0x8>;
 			};
 		};
 
-		dma@14000 {
-			compatible = "fsl,mpc5121-dma";
-			reg = <0x14000 0x1800>;
-			interrupts = <65 0x8>;
+		psc@11a00 {
+			status = "disabled";
+		};
+
+		psc@11b00 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
 		};
 	};
 };

arch/powerpc/boot/dts/uc101.dts

···
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { gpio-controller; };
+&gpt1 { gpio-controller; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
 / {
 	model = "manroland,uc101";
 	compatible = "manroland,uc101";
 
 	soc5200@f0000000 {
-		gpt0: timer@600 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
 		rtc@800 {
 			status = "disabled";
 		};

arch/powerpc/include/asm/mpc5121.h

···
 	u32	m4ccr;	/* MSCAN4 CCR */
 	u8	res[0x98]; /* Reserved */
 };
+
+/*
+ * LPC Module
+ */
+struct mpc512x_lpc {
+	u32	cs_cfg[8];	/* CS config */
+	u32	cs_ctrl;	/* CS Control Register */
+	u32	cs_status;	/* CS Status Register */
+	u32	burst_ctrl;	/* CS Burst Control Register */
+	u32	deadcycle_ctrl;	/* CS Deadcycle Control Register */
+	u32	holdcycle_ctrl;	/* CS Holdcycle Control Register */
+	u32	alt;		/* Address Latch Timing Register */
+};
+
+int mpc512x_cs_config(unsigned int cs, u32 val);
+int __init mpc5121_clk_init(void);
+
 #endif /* __ASM_POWERPC_MPC5121_H__ */

arch/powerpc/platforms/512x/clock.c

···
 
 #include <linux/of_platform.h>
 #include <asm/mpc5xxx.h>
+#include <asm/mpc5121.h>
 #include <asm/clk_interface.h>
 
 #undef CLK_DEBUG
···
 	u32 dccr;		/* DIU Clk Cnfg Reg */
 };
 
-struct mpc512x_clockctl __iomem *clockctl;
+static struct mpc512x_clockctl __iomem *clockctl;
 
 static int mpc5121_clk_enable(struct clk *clk)
 {
···
 		36, 40, 44, 48,
 		52, 56, 60, 64
 	};
-	int spmf = (clockctl->spmr >> 24) & 0xf;
+	int spmf = (in_be32(&clockctl->spmr) >> 24) & 0xf;
 	return spmf_to_mult[spmf];
 }
 
···
 		52, 56, 58, 62,
 		60, 64, 66,
 	};
-	int sysdiv = (clockctl->scfr2 >> 26) & 0x3f;
+	int sysdiv = (in_be32(&clockctl->scfr2) >> 26) & 0x3f;
 	return sysdiv_to_div_x_2[sysdiv];
 }
 
···
 
 static long ips_to_ref(unsigned long rate)
 {
-	int ips_div = (clockctl->scfr1 >> 23) & 0x7;
+	int ips_div = (in_be32(&clockctl->scfr1) >> 23) & 0x7;
 
 	rate *= ips_div;	/* csb_clk = ips_clk * ips_div */
 	rate *= 2;		/* sys_clk = csb_clk * 2 */
···
 
 static void diu_clk_calc(struct clk *clk)
 {
-	int diudiv_x_2 = clockctl->scfr1 & 0xff;
+	int diudiv_x_2 = in_be32(&clockctl->scfr1) & 0xff;
 	unsigned long rate;
 
 	rate = sys_clk.rate;
···
 
 static void generic_div_clk_calc(struct clk *clk)
 {
-	int div = (clockctl->scfr1 >> clk->div_shift) & 0x7;
+	int div = (in_be32(&clockctl->scfr1) >> clk->div_shift) & 0x7;
 
 	clk->rate = clk->parent->rate / div;
 }
···
 
 static void e300_clk_calc(struct clk *clk)
 {
-	int spmf = (clockctl->spmr >> 16) & 0xf;
+	int spmf = (in_be32(&clockctl->spmr) >> 16) & 0xf;
 	int ratex2 = clk->parent->rate * spmf;
 
 	clk->rate = ratex2 / 2;
···
 	.calc = ac97_clk_calc,
 };
 
-struct clk *rate_clks[] = {
+static struct clk *rate_clks[] = {
 	&ref_clk,
 	&sys_clk,
 	&diu_clk,
···
  * There are two clk enable registers with 32 enable bits each
  * psc clocks and device clocks are all stored in dev_clks
  */
-struct clk dev_clks[2][32];
+static struct clk dev_clks[2][32];
 
 /*
  * Given a psc number return the dev_clk
···
 	out_be32(&clockctl->pccr[pscnum], 0x00020000);
 	out_be32(&clockctl->pccr[pscnum], 0x00030000);
 
-	if (clockctl->pccr[pscnum] & 0x80) {
+	if (in_be32(&clockctl->pccr[pscnum]) & 0x80) {
 		clk->rate = spdif_rxclk.rate;
 		return;
 	}
 
-	switch ((clockctl->pccr[pscnum] >> 14) & 0x3) {
+	switch ((in_be32(&clockctl->pccr[pscnum]) >> 14) & 0x3) {
 	case 0:
 		mclk_src = sys_clk.rate;
 		break;
···
 		break;
 	}
 
-	mclk_div = ((clockctl->pccr[pscnum] >> 17) & 0x7fff) + 1;
+	mclk_div = ((in_be32(&clockctl->pccr[pscnum]) >> 17) & 0x7fff) + 1;
 	clk->rate = mclk_src / mclk_div;
 }
 
···
 static void psc_clks_init(void)
 {
 	struct device_node *np;
-	const u32 *cell_index;
 	struct platform_device *ofdev;
+	u32 reg;
 
 	for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
-		cell_index = of_get_property(np, "cell-index", NULL);
-		if (cell_index) {
-			int pscnum = *cell_index;
+		if (!of_property_read_u32(np, "reg", &reg)) {
+			int pscnum = (reg & 0xf00) >> 8;
 			struct clk *clk = psc_dev_clk(pscnum);
 
 			clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL;
···
 			 * AC97 is special rate clock does
 			 * not go through normal path
 			 */
-			if (strcmp("ac97", np->name) == 0)
+			if (of_device_is_compatible(np, "fsl,mpc5121-psc-ac97"))
 				clk->rate = ac97_clk.rate;
 			else
 				psc_calc_rate(clk, pscnum, np);

arch/powerpc/platforms/512x/mpc512x_shared.c

···
 
 void __init mpc512x_init(void)
 {
-	mpc512x_declare_of_platform_devices();
 	mpc5121_clk_init();
+	mpc512x_declare_of_platform_devices();
 	mpc512x_restart_init();
 	mpc512x_psc_fifo_init();
 }
+
+/**
+ * mpc512x_cs_config - Setup chip select configuration
+ * @cs: chip select number
+ * @val: chip select configuration value
+ *
+ * Perform chip select configuration for devices on LocalPlus Bus.
+ * Intended to dynamically reconfigure the chip select parameters
+ * for configurable devices on the bus.
+ */
+int mpc512x_cs_config(unsigned int cs, u32 val)
+{
+	static struct mpc512x_lpc __iomem *lpc;
+	struct device_node *np;
+
+	if (cs > 7)
+		return -EINVAL;
+
+	if (!lpc) {
+		np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-lpc");
+		lpc = of_iomap(np, 0);
+		of_node_put(np);
+		if (!lpc)
+			return -ENOMEM;
+	}
+
+	out_be32(&lpc->cs_cfg[cs], val);
+	return 0;
+}
+EXPORT_SYMBOL(mpc512x_cs_config);

arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c

···
 #include <asm/mpc52xx.h>
 #include <asm/time.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/bestcomm_priv.h>
-#include <sysdev/bestcomm/gen_bd.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/gen_bd.h>
 
 MODULE_AUTHOR("Grant Likely <[e-mail]>");
 MODULE_DESCRIPTION("MPC5200 LocalPlus FIFO device driver");

arch/powerpc/platforms/Kconfig

···
 	  Uses information from the OF or flattened device tree to instantiate
 	  platform devices for direct mapped RTC chips like the DS1742 or DS1743.
 
-source "arch/powerpc/sysdev/bestcomm/Kconfig"
-
 config SIMPLE_GPIO
 	bool "Support for simple, memory-mapped GPIO controllers"
 	depends on PPC

arch/powerpc/sysdev/Makefile

···
 obj-$(CONFIG_FSL_RIO)		+= fsl_rio.o fsl_rmu.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
-obj-$(CONFIG_PPC_BESTCOMM)	+= bestcomm/
 mv64x60-$(CONFIG_PCI)		+= mv64x60_pci.o
 obj-$(CONFIG_MV64X60)		+= $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
 				   mv64x60_udbg.o

arch/powerpc/sysdev/bestcomm/ata.c drivers/dma/bestcomm/ata.c

···
 #include <linux/types.h>
 #include <asm/io.h>
 
-#include "bestcomm.h"
-#include "bestcomm_priv.h"
-#include "ata.h"
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/ata.h>
 
 
 /* ======================================================================== */

arch/powerpc/sysdev/bestcomm/bestcomm.c drivers/dma/bestcomm/bestcomm.c

···
 #include <asm/irq.h>
 #include <asm/mpc52xx.h>
 
-#include "sram.h"
-#include "bestcomm_priv.h"
-#include "bestcomm.h"
+#include <linux/fsl/bestcomm/sram.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include "linux/fsl/bestcomm/bestcomm.h"
 
 #define DRIVER_NAME "bestcomm-core"
 

arch/powerpc/sysdev/bestcomm/fec.c drivers/dma/bestcomm/fec.c

···
 #include <linux/types.h>
 #include <asm/io.h>
 
-#include "bestcomm.h"
-#include "bestcomm_priv.h"
-#include "fec.h"
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/fec.h>
 
 
 /* ======================================================================== */

arch/powerpc/sysdev/bestcomm/gen_bd.c drivers/dma/bestcomm/gen_bd.c

···
 #include <asm/mpc52xx.h>
 #include <asm/mpc52xx_psc.h>
 
-#include "bestcomm.h"
-#include "bestcomm_priv.h"
-#include "gen_bd.h"
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/gen_bd.h>
 
 
 /* ======================================================================== */

arch/powerpc/sysdev/bestcomm/sram.c drivers/dma/bestcomm/sram.c

···
 #include <asm/io.h>
 #include <asm/mmu.h>
 
-#include "sram.h"
+#include <linux/fsl/bestcomm/sram.h>
 
 
 /* Struct keeping our 'state' */

arch/powerpc/sysdev/mpc5xxx_clocks.c

···
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/export.h>
+#include <asm/mpc5xxx.h>
 
-unsigned int
-mpc5xxx_get_bus_frequency(struct device_node *node)
+unsigned long mpc5xxx_get_bus_frequency(struct device_node *node)
 {
 	struct device_node *np;
 	const unsigned int *p_bus_freq = NULL;

drivers/Makefile

···
 obj-y				+= amba/
 # Many drivers will want to use DMA so this has to be made available
 # really early.
-obj-$(CONFIG_DMA_ENGINE)	+= dma/
+obj-$(CONFIG_DMADEVICES)	+= dma/
 
 obj-$(CONFIG_VIRTIO)		+= virtio/
 obj-$(CONFIG_XEN)		+= xen/

drivers/ata/pata_mpc52xx.c

···
 #include <asm/prom.h>
 #include <asm/mpc52xx.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/bestcomm_priv.h>
-#include <sysdev/bestcomm/ata.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/ata.h>
 
 #define DRV_NAME	"mpc52xx_ata"
 

drivers/dma/Kconfig

···
 	---help---
 	  Enable support for the Freescale MPC512x built-in DMA engine.
 
+source "drivers/dma/bestcomm/Kconfig"
+
 config MV_XOR
 	bool "Marvell XOR engine support"
 	depends on PLAT_ORION

drivers/dma/Makefile

···
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o
+obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC) += dw_dmac.o
 obj-$(CONFIG_AT_HDMAC) += at_hdmac.o

drivers/net/ethernet/freescale/fec_mpc52xx.c

···
 #include <asm/delay.h>
 #include <asm/mpc52xx.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/fec.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/fec.h>
 
 #include "fec_mpc52xx.h"
 

drivers/video/fsl-diu-fb.c

···
 #define PF_COMP_0_MASK		0x0000000F
 #define PF_COMP_0_SHIFT		0
 
-#define MAKE_PF(alpha, red, blue, green, size, c0, c1, c2, c3) \
+#define MAKE_PF(alpha, red, green, blue, size, c0, c1, c2, c3) \
 	cpu_to_le32(PF_BYTE_F | (alpha << PF_ALPHA_C_SHIFT) | \
 	(blue << PF_BLUE_C_SHIFT) | (green << PF_GREEN_C_SHIFT) | \
 	(red << PF_RED_C_SHIFT) | (c3 << PF_COMP_3_SHIFT) | \
···
 	switch (bits_per_pixel) {
 	case 32:
 		/* 0x88883316 */
-		return MAKE_PF(3, 2, 0, 1, 3, 8, 8, 8, 8);
+		return MAKE_PF(3, 2, 1, 0, 3, 8, 8, 8, 8);
 	case 24:
 		/* 0x88082219 */
-		return MAKE_PF(4, 0, 1, 2, 2, 0, 8, 8, 8);
+		return MAKE_PF(4, 0, 1, 2, 2, 8, 8, 8, 0);
 	case 16:
 		/* 0x65053118 */
 		return MAKE_PF(4, 2, 1, 0, 1, 5, 6, 5, 0);
···
 	return 0;
 }
 
+static inline void fsl_diu_enable_interrupts(struct fsl_diu_data *data)
+{
+	u32 int_mask = INT_UNDRUN; /* enable underrun detection */
+
+	if (IS_ENABLED(CONFIG_NOT_COHERENT_CACHE))
+		int_mask |= INT_VSYNC; /* enable vertical sync */
+
+	clrbits32(&data->diu_reg->int_mask, int_mask);
+}
+
 /* turn on fb if count == 1
  */
 static int fsl_diu_open(struct fb_info *info, int user)
···
 		if (res < 0)
 			mfbi->count--;
 		else {
-			struct fsl_diu_data *data = mfbi->parent;
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-			/*
-			 * Enable underrun detection and vertical sync
-			 * interrupts.
-			 */
-			clrbits32(&data->diu_reg->int_mask,
-				  INT_UNDRUN | INT_VSYNC);
-#else
-			/* Enable underrun detection */
-			clrbits32(&data->diu_reg->int_mask, INT_UNDRUN);
-#endif
+			fsl_diu_enable_interrupts(mfbi->parent);
 			fsl_diu_enable_panel(info);
 		}
 	}
···
 	mfbi->count--;
 	if (mfbi->count == 0) {
 		struct fsl_diu_data *data = mfbi->parent;
+		bool disable = true;
+		int i;
 
-		/* Disable interrupts */
-		out_be32(&data->diu_reg->int_mask, 0xffffffff);
+		/* Disable interrupts only if all AOIs are closed */
+		for (i = 0; i < NUM_AOIS; i++) {
+			struct mfb_info *mi = data->fsl_diu_info[i].par;
+
+			if (mi->count)
+				disable = false;
+		}
+		if (disable)
+			out_be32(&data->diu_reg->int_mask, 0xffffffff);
 		fsl_diu_disable_panel(info);
 	}
 
···
 	out_be32(&data->diu_reg->desc[1], data->dummy_ad.paddr);
 	out_be32(&data->diu_reg->desc[2], data->dummy_ad.paddr);
 
-	for (i = 0; i < NUM_AOIS; i++) {
-		ret = install_fb(&data->fsl_diu_info[i]);
-		if (ret) {
-			dev_err(&pdev->dev, "could not register fb %d\n", i);
-			goto error;
-		}
-	}
-
 	/*
 	 * Older versions of U-Boot leave interrupts enabled, so disable
 	 * all of them and clear the status register.
···
 	in_be32(&data->diu_reg->int_status);
 
 	ret = request_irq(data->irq, fsl_diu_isr, 0, "fsl-diu-fb",
-			  &data->diu_reg);
+			  data->diu_reg);
 	if (ret) {
 		dev_err(&pdev->dev, "could not claim irq\n");
 		goto error;
+	}
+
+	for (i = 0; i < NUM_AOIS; i++) {
+		ret = install_fb(&data->fsl_diu_info[i]);
+		if (ret) {
+			dev_err(&pdev->dev, "could not register fb %d\n", i);
+			free_irq(data->irq, data->diu_reg);
+			goto error;
+		}
 	}
 
 	sysfs_attr_init(&data->dev_attr.attr);
···
 	data = dev_get_drvdata(&pdev->dev);
 	disable_lcdc(&data->fsl_diu_info[0]);
 
-	free_irq(data->irq, &data->diu_reg);
+	free_irq(data->irq, data->diu_reg);
 
 	for (i = 0; i < NUM_AOIS; i++)
 		uninstall_fb(&data->fsl_diu_info[i]);

sound/soc/fsl/mpc5200_dma.c

···
 
 #include <sound/soc.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/gen_bd.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/gen_bd.h>
 #include <asm/mpc52xx_psc.h>
 
 #include "mpc5200_dma.h"