Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
[PATCH] dvb: bt8xx: updated documentation
updated documentation (Manu Abraham)
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
authored by
Johannes Stezenbach
and committed by
Linus Torvalds
df481ae5
4a2cc126
+16
-26
Documentation/dvb/bt8xx.txt
+16
-26
Documentation/dvb/bt8xx.txt
···
35
35
$ modprobe bttv (normally bttv is being loaded automatically by kmod)
36
36
$ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading)
37
37
38
-
3b) TwinHan
39
-
-----------
38
+
39
+
3b) TwinHan and Clones
40
+
--------------------------
40
41
41
42
$ modprobe bttv i2c_hw=1 card=0x71
42
43
$ modprobe dvb-bt8xx
43
44
$ modprobe dst
44
45
45
-
The value 0x71 will override the PCI type detection for dvb-bt8xx, which
46
-
is necessary for TwinHan cards.#
46
+
The value 0x71 will override the PCI type detection for dvb-bt8xx,
47
+
which is necessary for TwinHan cards.
47
48
48
-
If you're having an older card (blue color circuit) and card=0x71 locks your
49
-
machine, try using 0x68, too. If that does not work, ask on the DVB mailing list.
49
+
If you're having an older card (blue color circuit) and card=0x71 locks
50
+
your machine, try using 0x68, too. If that does not work, ask on the
51
+
mailing list.
50
52
51
-
The DST module takes a couple of useful parameters, in case the
52
-
dst drivers fails to detect your type of card correctly.
53
+
The DST module takes a couple of useful parameters.
53
54
54
-
dst_type takes values 0 (satellite), 1 (terrestial TV), 2 (cable).
55
+
verbose takes values 0 to 5. These values control the verbosity level.
55
56
56
-
dst_type_flags takes bit combined values:
57
-
1 = new tuner type packets. You can use this if your card is detected
58
-
and you have debug and you continually see the tuner packets not
59
-
working (make sure not a basic problem like dish alignment etc.)
57
+
debug takes values 0 and 1. You can either disable or enable debugging.
60
58
61
-
2 = TS 204. If your card tunes OK, but the picture is terrible, seemingly
62
-
breaking up in one half continually, and crc fails a lot, then
63
-
this is worth a try (or trying to turn off)
59
+
dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
60
+
0x20 means it has a Conditional Access slot.
64
61
65
-
4 = has symdiv. Some cards, mostly without new tuner packets, require
66
-
a symbol division algorithm. Doesn't apply to terrestial TV.
67
-
68
-
You can also specify a value to have the autodetected values turned off
69
-
(e.g. 0). The autodected values are determined bythe cards 'response
62
+
The autodected values are determined bythe cards 'response
70
63
string' which you can see in your logs e.g.
71
64
72
-
dst_check_ci: recognize DST-MOT
65
+
dst_get_device_id: Recognise [DSTMCI]
73
66
74
-
or
75
-
76
-
dst_check_ci: unable to recognize DSTXCI or STXCI
77
67
78
68
--
79
-
Authors: Richard Walker, Jamie Honan, Michael Hunold
69
+
Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham