[SCSI] mvsas: increase port type detection delay to suit Seagate's 10k6 drive ST3450856SS 0003

I increased the delay step by step until loading of mvsas
reliably detected the drive 200 times in sequence. A much better
approach would be to monitor the hardware for some flag which
indicates that port detection has finished, but I do not have any
hardware documentation.

Signed-off-by: Reinhard Nissl <[e-mail]>
Cc: Ke Wei <[e-mail]>
Signed-off-by: James Bottomley <[e-mail]>

drivers/scsi/mvsas.c

···
 
 	/* enable auto port detection */
 	mw32(GBL_PORT_TYPE, MODE_AUTO_DET_EN);
-	msleep(100);
+	msleep(1100);
 	/* init and reset phys */
 	for (i = 0; i < mvi->chip->n_phy; i++) {
 		u32 lo = be32_to_cpu(*(u32 *)&mvi->sas_addr[4]);