tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
ARM: dts: imx: Add support for Advantech DMS-BA16
Add support for Advantech DMS-BA16 board, which uses
the Advantech BA-16 module.
Signed-off-by: Ken Lin <yungching0725@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
+140
+1
arch/arm/boot/dts/Makefile
+1
arch/arm/boot/dts/Makefile
+139
arch/arm/boot/dts/imx6q-dms-ba16.dts
+139
arch/arm/boot/dts/imx6q-dms-ba16.dts
···
1
+
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
+
3
+
/dts-v1/;
4
+
5
+
#include <dt-bindings/gpio/gpio.h>
6
+
#include "imx6q-ba16.dtsi"
7
+
8
+
/ {
9
+
model = "Advantech DMS-BA16";
10
+
compatible = "advantech,imx6q-dms-ba16", "advantech,imx6q-ba16", "fsl,imx6q";
11
+
12
+
reg_usb_otg_vbus: regulator-usbotgvbus {
13
+
compatible = "regulator-fixed";
14
+
regulator-name = "usb_otg_vbus";
15
+
regulator-min-microvolt = <5000000>;
16
+
regulator-max-microvolt = <5000000>;
17
+
pinctrl-names = "default";
18
+
pinctrl-0 = <&pinctrl_usbotgvbus>;
19
+
gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
20
+
enable-active-high;
21
+
};
22
+
23
+
sys_mclk: clock-sys-mclk {
24
+
compatible = "fixed-clock";
25
+
#clock-cells = <0>;
26
+
clock-frequency = <22000000>;
27
+
};
28
+
29
+
sound {
30
+
compatible = "fsl,imx6q-ba16-sgtl5000",
31
+
"fsl,imx-audio-sgtl5000";
32
+
model = "imx6q-ba16-sgtl5000";
33
+
ssi-controller = <&ssi1>;
34
+
audio-codec = <&sgtl5000>;
35
+
audio-routing =
36
+
"MIC_IN", "Mic Jack",
37
+
"Mic Jack", "Mic Bias",
38
+
"Headphone Jack", "HP_OUT";
39
+
mux-int-port = <1>;
40
+
mux-ext-port = <4>;
41
+
};
42
+
};
43
+
44
+
&ecspi5 {
45
+
cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
46
+
pinctrl-names = "default";
47
+
pinctrl-0 = <&pinctrl_ecspi5>;
48
+
status = "okay";
49
+
50
+
m25_eeprom: m25p80@0 {
51
+
compatible = "atmel,at25256B", "atmel,at25";
52
+
spi-max-frequency = <20000000>;
53
+
size = <0x8000>;
54
+
pagesize = <64>;
55
+
reg = <0>;
56
+
address-width = <16>;
57
+
};
58
+
};
59
+
60
+
&iomuxc {
61
+
pinctrl_i2c1_gpio: i2c1gpiogrp {
62
+
fsl,pins = <
63
+
MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x1b0b0
64
+
MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x1b0b0
65
+
>;
66
+
};
67
+
68
+
pinctrl_i2c2_gpio: i2c2gpiogrp {
69
+
fsl,pins = <
70
+
MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
71
+
MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0
72
+
>;
73
+
};
74
+
75
+
pinctrl_i2c3_gpio: i2c3gpiogrp {
76
+
fsl,pins = <
77
+
MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0
78
+
MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0
79
+
>;
80
+
};
81
+
82
+
pinctrl_usbotgvbus: usbotgvbusgrp {
83
+
fsl,pins = <
84
+
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
85
+
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
86
+
>;
87
+
};
88
+
};
89
+
90
+
&i2c1 {
91
+
clock-frequency = <100000>;
92
+
pinctrl-names = "default";
93
+
pinctrl-0 = <&pinctrl_i2c1>;
94
+
status = "okay";
95
+
96
+
sgtl5000: codec@a {
97
+
compatible = "fsl,sgtl5000";
98
+
reg = <0x0a>;
99
+
clocks = <&sys_mclk>;
100
+
lrclk-strength = <0x3>;
101
+
VDDA-supply = <®_1p8v>;
102
+
VDDIO-supply = <®_3p3v>;
103
+
};
104
+
};
105
+
106
+
&pwm2 {
107
+
pinctrl-names = "default";
108
+
pinctrl-0 = <&pinctrl_pwm2>;
109
+
status = "okay";
110
+
};
111
+
112
+
&sata {
113
+
fsl,no-spread-spectrum;
114
+
fsl,transmit-atten-16ths = <12>;
115
+
fsl,transmit-boost-mdB = <3330>;
116
+
fsl,transmit-level-mV = <1133>;
117
+
fsl,receive-dpll-mode = <1>;
118
+
status = "okay";
119
+
};
120
+
121
+
&usbotg {
122
+
vbus-supply = <®_usb_otg_vbus>;
123
+
pinctrl-names = "default";
124
+
pinctrl-0 = <&pinctrl_usbotg>;
125
+
dr_mode = "otg";
126
+
disable-over-current;
127
+
status = "okay";
128
+
};
129
+
130
+
&usdhc4 {
131
+
pinctrl-names = "default";
132
+
pinctrl-0 = <&pinctrl_usdhc4>;
133
+
bus-width = <8>;
134
+
cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
135
+
no-1-8-v;
136
+
keep-power-in-suspend;
137
+
wakeup-source;
138
+
status = "okay";
139
+
};