Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
[ARM] 4509/1: S3C: Create initial arch/arm/plat-s3c
Create the initial arch/arm/plat-s3c directory and start
linking it into the arch/arm build heirarchy ready to
receive the generic parts of the S3C24XX support to be
used when adding S3C6400 devices.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
authored by Ben Dooks and committed by Russell King d58153d8 531b617c
+1
arch/arm/Kconfig
+1
arch/arm/Kconfig
+76
arch/arm/plat-s3c/Kconfig
+76
arch/arm/plat-s3c/Kconfig
···
1
+
# arch/arm/plat-s3c/Kconfig
2
+
#
3
+
# Copyright 2007 Simtec Electronics
4
+
#
5
+
# Licensed under GPLv2
6
+
7
+
config PLAT_S3C
8
+
bool
9
+
depends on ARCH_S3C2410
10
+
default y if ARCH_S3C2410
11
+
select NO_IOPORT
12
+
help
13
+
Base platform code for any Samsung S3C device
14
+
15
+
comment "Boot options"
16
+
17
+
config S3C2410_BOOT_WATCHDOG
18
+
bool "S3C2410 Initialisation watchdog"
19
+
depends on PLAT_S3C && S3C2410_WATCHDOG
20
+
help
21
+
Say y to enable the watchdog during the kernel decompression
22
+
stage. If the kernel fails to uncompress, then the watchdog
23
+
will trigger a reset and the system should restart.
24
+
25
+
config S3C2410_BOOT_ERROR_RESET
26
+
bool "S3C2410 Reboot on decompression error"
27
+
depends on PLAT_S3C
28
+
help
29
+
Say y here to use the watchdog to reset the system if the
30
+
kernel decompressor detects an error during decompression.
31
+
32
+
comment "Power management"
33
+
34
+
config S3C2410_PM_DEBUG
35
+
bool "S3C2410 PM Suspend debug"
36
+
depends on PLAT_S3C && PM
37
+
help
38
+
Say Y here if you want verbose debugging from the PM Suspend and
39
+
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
40
+
for more information.
41
+
42
+
config S3C2410_PM_CHECK
43
+
bool "S3C2410 PM Suspend Memory CRC"
44
+
depends on PLAT_S3C && PM && CRC32
45
+
help
46
+
Enable the PM code's memory area checksum over sleep. This option
47
+
will generate CRCs of all blocks of memory, and store them before
48
+
going to sleep. The blocks are then checked on resume for any
49
+
errors.
50
+
51
+
Note, this can take several seconds depending on memory size
52
+
and CPU speed.
53
+
54
+
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
55
+
56
+
config S3C2410_PM_CHECK_CHUNKSIZE
57
+
int "S3C2410 PM Suspend CRC Chunksize (KiB)"
58
+
depends on PLAT_S3C && PM && S3C2410_PM_CHECK
59
+
default 64
60
+
help
61
+
Set the chunksize in Kilobytes of the CRC for checking memory
62
+
corruption over suspend and resume. A smaller value will mean that
63
+
the CRC data block will take more memory, but wil identify any
64
+
faults with better precision.
65
+
66
+
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
67
+
68
+
config S3C2410_LOWLEVEL_UART_PORT
69
+
int "S3C2410 UART to use for low-level messages"
70
+
depends on PLAT_S3C
71
+
default 0
72
+
help
73
+
Choice of which UART port to use for the low-level messages,
74
+
such as the `Uncompressing...` at start time. The value of
75
+
this configuration should be between zero and two. The port
76
+
must have been initialised by the boot-loader before use.
+1
-59
arch/arm/plat-s3c24xx/Kconfig
+1
-59
arch/arm/plat-s3c24xx/Kconfig
···
10
10
default y if ARCH_S3C2410
11
11
select NO_IOPORT
12
12
help
13
-
Base platform code for any Samsung S3C device
13
+
Base platform code for any Samsung S3C24XX device
14
14
15
15
if PLAT_S3C24XX
16
16
···
25
25
help
26
26
Common power management code for systems that are
27
27
compatible with the Simtec style of power management
28
-
29
-
config S3C2410_BOOT_WATCHDOG
30
-
bool "S3C2410 Initialisation watchdog"
31
-
depends on ARCH_S3C2410 && S3C2410_WATCHDOG
32
-
help
33
-
Say y to enable the watchdog during the kernel decompression
34
-
stage. If the kernel fails to uncompress, then the watchdog
35
-
will trigger a reset and the system should restart.
36
-
37
-
config S3C2410_BOOT_ERROR_RESET
38
-
bool "S3C2410 Reboot on decompression error"
39
-
depends on ARCH_S3C2410
40
-
help
41
-
Say y here to use the watchdog to reset the system if the
42
-
kernel decompressor detects an error during decompression.
43
-
44
-
config S3C2410_PM_DEBUG
45
-
bool "S3C2410 PM Suspend debug"
46
-
depends on ARCH_S3C2410 && PM
47
-
help
48
-
Say Y here if you want verbose debugging from the PM Suspend and
49
-
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
50
-
for more information.
51
-
52
-
config S3C2410_PM_CHECK
53
-
bool "S3C2410 PM Suspend Memory CRC"
54
-
depends on ARCH_S3C2410 && PM && CRC32
55
-
help
56
-
Enable the PM code's memory area checksum over sleep. This option
57
-
will generate CRCs of all blocks of memory, and store them before
58
-
going to sleep. The blocks are then checked on resume for any
59
-
errors.
60
-
61
-
Note, this can take several seconds depending on memory size
62
-
and CPU speed.
63
-
64
-
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
65
-
66
-
config S3C2410_PM_CHECK_CHUNKSIZE
67
-
int "S3C2410 PM Suspend CRC Chunksize (KiB)"
68
-
depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
69
-
default 64
70
-
help
71
-
Set the chunksize in Kilobytes of the CRC for checking memory
72
-
corruption over suspend and resume. A smaller value will mean that
73
-
the CRC data block will take more memory, but wil identify any
74
-
faults with better precision.
75
-
76
-
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
77
-
78
-
config S3C2410_LOWLEVEL_UART_PORT
79
-
int "S3C2410 UART to use for low-level messages"
80
-
default 0
81
-
help
82
-
Choice of which UART port to use for the low-level messages,
83
-
such as the `Uncompressing...` at start time. The value of
84
-
this configuration should be between zero and two. The port
85
-
must have been initialised by the boot-loader before use.
86
28
87
29
config S3C2410_DMA
88
30
bool "S3C2410 DMA support"