drm/amd/display: Enable backlight support for pre-DCE11 ASICs

Initializing ABM and DMCU modules for dce 80/81/83/100 as in DCE110
Adding constructors and destructors for each module.
Adding register list for DMCU in dce80 as some registers are missing
in dce80 from the basic list. DMCU is never used, so it would not have
any functional impact.

Signed-off-by: Mikita Lipski <[e-mail]>
Reviewed-by: Harry Wentland <[e-mail]>
Signed-off-by: Alex Deucher <[e-mail]>

drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.h

···
 	SR(SMU_INTERRUPT_CONTROL), \
 	SR(DC_DMCU_SCRATCH)
 
+#define DMCU_DCE80_REG_LIST() \
+	SR(DMCU_CTRL), \
+	SR(DMCU_STATUS), \
+	SR(DMCU_RAM_ACCESS_CTRL), \
+	SR(DMCU_IRAM_WR_CTRL), \
+	SR(DMCU_IRAM_WR_DATA), \
+	SR(MASTER_COMM_DATA_REG1), \
+	SR(MASTER_COMM_DATA_REG2), \
+	SR(MASTER_COMM_DATA_REG3), \
+	SR(MASTER_COMM_CMD_REG), \
+	SR(MASTER_COMM_CNTL_REG), \
+	SR(DMCU_IRAM_RD_CTRL), \
+	SR(DMCU_IRAM_RD_DATA), \
+	SR(DMCU_INTERRUPT_TO_UC_EN_MASK), \
+	SR(SMU_INTERRUPT_CONTROL), \
+	SR(DC_DMCU_SCRATCH)
+
 #define DMCU_DCE110_COMMON_REG_LIST() \
 	DMCU_COMMON_REG_LIST_DCE_BASE(), \
 	SR(DCI_MEM_PWR_STATUS)
···
 			STATIC_SCREEN3_INT_TO_UC_EN, mask_sh), \
 	DMCU_SF(DMCU_INTERRUPT_TO_UC_EN_MASK, \
 			STATIC_SCREEN4_INT_TO_UC_EN, mask_sh), \
+	DMCU_SF(SMU_INTERRUPT_CONTROL, DC_SMU_INT_ENABLE, mask_sh)
+
+#define DMCU_MASK_SH_LIST_DCE80(mask_sh) \
+	DMCU_SF(DMCU_CTRL, \
+			DMCU_ENABLE, mask_sh), \
+	DMCU_SF(DMCU_STATUS, \
+			UC_IN_STOP_MODE, mask_sh), \
+	DMCU_SF(DMCU_STATUS, \
+			UC_IN_RESET, mask_sh), \
+	DMCU_SF(DMCU_RAM_ACCESS_CTRL, \
+			IRAM_HOST_ACCESS_EN, mask_sh), \
+	DMCU_SF(DMCU_RAM_ACCESS_CTRL, \
+			IRAM_WR_ADDR_AUTO_INC, mask_sh), \
+	DMCU_SF(DMCU_RAM_ACCESS_CTRL, \
+			IRAM_RD_ADDR_AUTO_INC, mask_sh), \
+	DMCU_SF(MASTER_COMM_CMD_REG, \
+			MASTER_COMM_CMD_REG_BYTE0, mask_sh), \
+	DMCU_SF(MASTER_COMM_CNTL_REG, MASTER_COMM_INTERRUPT, mask_sh), \
 	DMCU_SF(SMU_INTERRUPT_CONTROL, DC_SMU_INT_ENABLE, mask_sh)
 
 #define DMCU_MASK_SH_LIST_DCE110(mask_sh) \

drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c

···
 #include "dce/dce_10_0_d.h"
 #include "dce/dce_10_0_sh_mask.h"
 
+#include "dce/dce_dmcu.h"
+#include "dce/dce_abm.h"
+
 #ifndef mmMC_HUB_RDREQ_DMIF_LIMIT
 #include "gmc/gmc_8_2_d.h"
 #include "gmc/gmc_8_2_sh_mask.h"
···
 		CS_COMMON_MASK_SH_LIST_DCE_COMMON_BASE(_MASK)
 };
 
+static const struct dce_dmcu_registers dmcu_regs = {
+		DMCU_DCE110_COMMON_REG_LIST()
+};
 
+static const struct dce_dmcu_shift dmcu_shift = {
+		DMCU_MASK_SH_LIST_DCE110(__SHIFT)
+};
+
+static const struct dce_dmcu_mask dmcu_mask = {
+		DMCU_MASK_SH_LIST_DCE110(_MASK)
+};
+
+static const struct dce_abm_registers abm_regs = {
+		ABM_DCE110_COMMON_REG_LIST()
+};
+
+static const struct dce_abm_shift abm_shift = {
+		ABM_MASK_SH_LIST_DCE110(__SHIFT)
+};
+
+static const struct dce_abm_mask abm_mask = {
+		ABM_MASK_SH_LIST_DCE110(_MASK)
+};
 
 #define DCFE_MEM_PWR_CTRL_REG_BASE 0x1b03
 
···
 	if (pool->base.display_clock != NULL)
 		dce_disp_clk_destroy(&pool->base.display_clock);
 
+	if (pool->base.abm != NULL)
+				dce_abm_destroy(&pool->base.abm);
+
+	if (pool->base.dmcu != NULL)
+			dce_dmcu_destroy(&pool->base.dmcu);
+
 	if (pool->base.irqs != NULL)
 		dal_irq_service_destroy(&pool->base.irqs);
 }
···
 		goto res_create_fail;
 	}
 
+	pool->base.dmcu = dce_dmcu_create(ctx,
+			&dmcu_regs,
+			&dmcu_shift,
+			&dmcu_mask);
+	if (pool->base.dmcu == NULL) {
+		dm_error("DC: failed to create dmcu!\n");
+		BREAK_TO_DEBUGGER();
+		goto res_create_fail;
+	}
+
+	pool->base.abm = dce_abm_create(ctx,
+				&abm_regs,
+				&abm_shift,
+				&abm_mask);
+	if (pool->base.abm == NULL) {
+		dm_error("DC: failed to create abm!\n");
+		BREAK_TO_DEBUGGER();
+		goto res_create_fail;
+	}
 
 	/* get static clock information for PPLIB or firmware, save
 	 * max_clock_state

drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c

···
 
 #include "reg_helper.h"
 
+#include "dce/dce_dmcu.h"
+#include "dce/dce_abm.h"
 /* TODO remove this include */
 
 #ifndef mmMC_HUB_RDREQ_DMIF_LIMIT
···
 		.num_pll = 2,
 };
 
+static const struct dce_dmcu_registers dmcu_regs = {
+		DMCU_DCE80_REG_LIST()
+};
+
+static const struct dce_dmcu_shift dmcu_shift = {
+		DMCU_MASK_SH_LIST_DCE80(__SHIFT)
+};
+
+static const struct dce_dmcu_mask dmcu_mask = {
+		DMCU_MASK_SH_LIST_DCE80(_MASK)
+};
+static const struct dce_abm_registers abm_regs = {
+		ABM_DCE110_COMMON_REG_LIST()
+};
+
+static const struct dce_abm_shift abm_shift = {
+		ABM_MASK_SH_LIST_DCE110(__SHIFT)
+};
+
+static const struct dce_abm_mask abm_mask = {
+		ABM_MASK_SH_LIST_DCE110(_MASK)
+};
+
 #define CTX  ctx
 #define REG(reg) mm ## reg
 
···
 		}
 	}
 
+	if (pool->base.abm != NULL)
+			dce_abm_destroy(&pool->base.abm);
+
+	if (pool->base.dmcu != NULL)
+			dce_dmcu_destroy(&pool->base.dmcu);
+
 	if (pool->base.dp_clock_source != NULL)
 		dce80_clock_source_destroy(&pool->base.dp_clock_source);
 
···
 		goto res_create_fail;
 	}
 
+	pool->base.dmcu = dce_dmcu_create(ctx,
+			&dmcu_regs,
+			&dmcu_shift,
+			&dmcu_mask);
+	if (pool->base.dmcu == NULL) {
+		dm_error("DC: failed to create dmcu!\n");
+		BREAK_TO_DEBUGGER();
+		goto res_create_fail;
+	}
 
+	pool->base.abm = dce_abm_create(ctx,
+			&abm_regs,
+			&abm_shift,
+			&abm_mask);
+	if (pool->base.abm == NULL) {
+		dm_error("DC: failed to create abm!\n");
+		BREAK_TO_DEBUGGER();
+		goto res_create_fail;
+	}
 	if (dm_pp_get_static_clocks(ctx, &static_clk_info))
 		pool->base.display_clock->max_clks_state =
 					static_clk_info.max_clocks_state;
···
 		goto res_create_fail;
 	}
 
+	pool->base.dmcu = dce_dmcu_create(ctx,
+			&dmcu_regs,
+			&dmcu_shift,
+			&dmcu_mask);
+	if (pool->base.dmcu == NULL) {
+		dm_error("DC: failed to create dmcu!\n");
+		BREAK_TO_DEBUGGER();
+		goto res_create_fail;
+	}
+
+	pool->base.abm = dce_abm_create(ctx,
+			&abm_regs,
+			&abm_shift,
+			&abm_mask);
+	if (pool->base.abm == NULL) {
+		dm_error("DC: failed to create abm!\n");
+		BREAK_TO_DEBUGGER();
+		goto res_create_fail;
+	}
 
 	if (dm_pp_get_static_clocks(ctx, &static_clk_info))
 		pool->base.display_clock->max_clks_state =
···
 		goto res_create_fail;
 	}
 
+	pool->base.dmcu = dce_dmcu_create(ctx,
+			&dmcu_regs,
+			&dmcu_shift,
+			&dmcu_mask);
+	if (pool->base.dmcu == NULL) {
+		dm_error("DC: failed to create dmcu!\n");
+		BREAK_TO_DEBUGGER();
+		goto res_create_fail;
+	}
+
+	pool->base.abm = dce_abm_create(ctx,
+			&abm_regs,
+			&abm_shift,
+			&abm_mask);
+	if (pool->base.abm == NULL) {
+		dm_error("DC: failed to create abm!\n");
+		BREAK_TO_DEBUGGER();
+		goto res_create_fail;
+	}
 
 	if (dm_pp_get_static_clocks(ctx, &static_clk_info))
 		pool->base.display_clock->max_clks_state =