gpio-tz1090: Replace commas with semi-colons

Replace commas with semicolons between irqchip callback initialisation
statements in tz1090_gpio_bank_probe. The commas appear to be a subtle
remnant of when the irqchips were statically initialised.

Thanks to Thomas Gleixner for spotting it while whipping up a coccinelle
script.

Reported-by: Thomas Gleixner <[e-mail]>
Signed-off-by: James Hogan <[e-mail]>
Cc: Alexandre Courbot <[e-mail]>
Cc: [e-mail]
Cc: [e-mail]
Signed-off-by: Linus Walleij <[e-mail]>

drivers/gpio/gpio-tz1090.c

···
 	gc->chip_types[0].handler		= handle_level_irq;
 	gc->chip_types[0].regs.ack		= REG_GPIO_IRQ_STS;
 	gc->chip_types[0].regs.mask		= REG_GPIO_IRQ_EN;
-	gc->chip_types[0].chip.irq_startup	= gpio_startup_irq,
-	gc->chip_types[0].chip.irq_ack		= irq_gc_ack_clr_bit,
-	gc->chip_types[0].chip.irq_mask		= irq_gc_mask_clr_bit,
-	gc->chip_types[0].chip.irq_unmask	= irq_gc_mask_set_bit,
-	gc->chip_types[0].chip.irq_set_type	= gpio_set_irq_type,
-	gc->chip_types[0].chip.irq_set_wake	= gpio_set_irq_wake,
-	gc->chip_types[0].chip.flags		= IRQCHIP_MASK_ON_SUSPEND,
+	gc->chip_types[0].chip.irq_startup	= gpio_startup_irq;
+	gc->chip_types[0].chip.irq_ack		= irq_gc_ack_clr_bit;
+	gc->chip_types[0].chip.irq_mask		= irq_gc_mask_clr_bit;
+	gc->chip_types[0].chip.irq_unmask	= irq_gc_mask_set_bit;
+	gc->chip_types[0].chip.irq_set_type	= gpio_set_irq_type;
+	gc->chip_types[0].chip.irq_set_wake	= gpio_set_irq_wake;
+	gc->chip_types[0].chip.flags		= IRQCHIP_MASK_ON_SUSPEND;
 
 	/* edge chip type */
 	gc->chip_types[1].type			= IRQ_TYPE_EDGE_BOTH;
 	gc->chip_types[1].handler		= handle_edge_irq;
 	gc->chip_types[1].regs.ack		= REG_GPIO_IRQ_STS;
 	gc->chip_types[1].regs.mask		= REG_GPIO_IRQ_EN;
-	gc->chip_types[1].chip.irq_startup	= gpio_startup_irq,
-	gc->chip_types[1].chip.irq_ack		= irq_gc_ack_clr_bit,
-	gc->chip_types[1].chip.irq_mask		= irq_gc_mask_clr_bit,
-	gc->chip_types[1].chip.irq_unmask	= irq_gc_mask_set_bit,
-	gc->chip_types[1].chip.irq_set_type	= gpio_set_irq_type,
-	gc->chip_types[1].chip.irq_set_wake	= gpio_set_irq_wake,
-	gc->chip_types[1].chip.flags		= IRQCHIP_MASK_ON_SUSPEND,
+	gc->chip_types[1].chip.irq_startup	= gpio_startup_irq;
+	gc->chip_types[1].chip.irq_ack		= irq_gc_ack_clr_bit;
+	gc->chip_types[1].chip.irq_mask		= irq_gc_mask_clr_bit;
+	gc->chip_types[1].chip.irq_unmask	= irq_gc_mask_set_bit;
+	gc->chip_types[1].chip.irq_set_type	= gpio_set_irq_type;
+	gc->chip_types[1].chip.irq_set_wake	= gpio_set_irq_wake;
+	gc->chip_types[1].chip.flags		= IRQCHIP_MASK_ON_SUSPEND;
 
 	/* Setup chained handler for this GPIO bank */
 	irq_set_handler_data(bank->irq, bank);