ASoC: samsung: speyside: convert to snd_soc_dapm_xxx()

This patch converts below functions.

dapm->dev -> snd_soc_dapm_to_dev()
dapm->card -> snd_soc_dapm_to_card()
dapm->component -> snd_soc_dapm_to_component()

dapm_kcontrol_get_value() -> snd_soc_dapm_kcontrol_get_value()

snd_soc_component_enable_pin() -> snd_soc_dapm_enable_pin()
snd_soc_component_enable_pin_unlocked() -> snd_soc_dapm_enable_pin_unlocked()
snd_soc_component_disable_pin() -> snd_soc_dapm_disable_pin()
snd_soc_component_disable_pin_unlocked() -> snd_soc_dapm_disable_pin_unlocked()
snd_soc_component_nc_pin() -> snd_soc_dapm_nc_pin()
snd_soc_component_nc_pin_unlocked() -> snd_soc_dapm_nc_pin_unlocked()
snd_soc_component_get_pin_status() -> snd_soc_dapm_get_pin_status()
snd_soc_component_force_enable_pin() -> snd_soc_dapm_force_enable_pin()
snd_soc_component_force_enable_pin_unlocked() -> snd_soc_dapm_force_enable_pin_unlocked()
snd_soc_component_force_bias_level() -> snd_soc_dapm_force_bias_level()
snd_soc_component_get_bias_level() -> snd_soc_dapm_get_bias_level()
snd_soc_component_init_bias_level() -> snd_soc_dapm_init_bias_level()
snd_soc_component_get_dapm() -> snd_soc_component_to_dapm()

snd_soc_dapm_kcontrol_component() -> snd_soc_dapm_kcontrol_to_component()
snd_soc_dapm_kcontrol_widget() -> snd_soc_dapm_kcontrol_to_widget()
snd_soc_dapm_kcontrol_dapm() -> snd_soc_dapm_kcontrol_to_dapm()
snd_soc_dapm_np_pin() -> snd_soc_dapm_disable_pin()

Signed-off-by: Kuninori Morimoto <[e-mail]>
Reviewed-by: Charles Keepax <[e-mail]>
Link: https://patch.msgid.link/[e-mail]
Signed-off-by: Mark Brown <[e-mail]>

sound/soc/samsung/speyside.c

···
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[1]);
 	codec_dai = snd_soc_rtd_to_codec(rtd, 0);
 
-	if (dapm->dev != codec_dai->dev)
+	if (snd_soc_dapm_to_dev(dapm) != codec_dai->dev)
 		return 0;
 
 	switch (level) {
···
 	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[1]);
 	codec_dai = snd_soc_rtd_to_codec(rtd, 0);
 
-	if (dapm->dev != codec_dai->dev)
+	if (snd_soc_dapm_to_dev(dapm) != codec_dai->dev)
 		return 0;
 
 	switch (level) {
 	case SND_SOC_BIAS_PREPARE:
-		if (card->dapm.bias_level == SND_SOC_BIAS_STANDBY) {
+		if (snd_soc_dapm_get_bias_level(dapm) == SND_SOC_BIAS_STANDBY) {
 			ret = snd_soc_dai_set_pll(codec_dai, 0,
 						  WM8996_FLL_MCLK2,
 						  32768, MCLK_AUDIO_RATE);
···
 	gpiod_direction_output(speyside_hpsel_gpio, speyside_jack_polarity);
 
 	/* Re-run DAPM to make sure we're using the correct mic bias */
-	snd_soc_dapm_sync(snd_soc_component_get_dapm(component));
+	snd_soc_dapm_sync(snd_soc_component_to_dapm(component));
 }
 
 static int speyside_wm0010_init(struct snd_soc_pcm_runtime *rtd)
···
 
 static int speyside_late_probe(struct snd_soc_card *card)
 {
-	snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");
-	snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic");
-	snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC");
-	snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC");
-	snd_soc_dapm_ignore_suspend(&card->dapm, "Main Speaker");
-	snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output");
-	snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input");
+	struct snd_soc_dapm_context *dapm = snd_soc_card_to_dapm(card);
+
+	snd_soc_dapm_ignore_suspend(dapm, "Headphone");
+	snd_soc_dapm_ignore_suspend(dapm, "Headset Mic");
+	snd_soc_dapm_ignore_suspend(dapm, "Main AMIC");
+	snd_soc_dapm_ignore_suspend(dapm, "Main DMIC");
+	snd_soc_dapm_ignore_suspend(dapm, "Main Speaker");
+	snd_soc_dapm_ignore_suspend(dapm, "WM1250 Output");
+	snd_soc_dapm_ignore_suspend(dapm, "WM1250 Input");
 
 	return 0;
 }