dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor

One of the two DMA controllers managed by the DMAMUX can be used by the
coprocessor. It is defined in the device tree with dma-masters.
When the two DMA controllers are used by the main CPU,
dma-masters = <&dma1, &dma2>; is specified in the device tree.
When one of the controllers is used by coprocessor (so not managed by
Linux), dma-masters = <&dma1>; is specified in the device tree.
In this case, Linux driver must not reset the DMAMUX, because it could have
been configured by the coprocessor to use the second DMA controller.
count is the number of DMA controllers defined in dma-masters property.
Reset only if resets property is found and valid in device tree, and if
the two DMA controllers are under Linux control.

Signed-off-by: Amelie Delaunay <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Vinod Koul <[e-mail]>

drivers/dma/stm32-dmamux.c

···
 		ret = PTR_ERR(rst);
 		if (ret == -EPROBE_DEFER)
 			goto err_clk;
-	} else {
+	} else if (count > 1) { /* Don't reset if there is only one dma-master */
 		reset_control_assert(rst);
 		udelay(2);
 		reset_control_deassert(rst);