Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
ARM: ux500: update defconfig
ARM: u300: update defconfig
ARM: at91: enable additional boards in existing soc defconfig files
ARM: at91: refresh soc defconfig files for 3.2
ARM: at91: rename defconfig files appropriately
ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as module
ARM: OMAP2+: Remove empty io.h
ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is defined
ARM: OMAP: smartreflex: fix IRQ handling bug
ARM: OMAP: PM: only register TWL with voltage layer when device is present
ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIs
arm: mx28: fix bit operation in clock setting
ARM: imx: export imx_ioremap
ARM: imx/mm-imx3: conditionally compile i.MX31 and i.MX35 code
ARM: mx5: Fix checkpatch warnings in cpu-imx5.c
MAINTAINERS: Add missing directory
ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35'
ARM: imx6q: move clock register map to machine_desc.map_io
ARM: pxa168/gplugd: add the correct SSP device
ARM: Update mach-types to fix mxs build breakage
...

MAINTAINERS

···
 S:	Maintained
 T:	git git://git.pengutronix.de/git/imx/linux-2.6.git
 F:	arch/arm/mach-mx*/
+F:	arch/arm/mach-imx/
 F:	arch/arm/plat-mxc/
 
 ARM/FREESCALE IMX51
···
 S:	Maintained
 T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
 F:	arch/arm/mach-imx/*imx6*
+
+ARM/FREESCALE MXS ARM ARCHITECTURE
+M:	Shawn Guo <[e-mail]>
+L:	[e-mail] (moderated for non-subscribers)
+S:	Maintained
+T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
+F:	arch/arm/mach-mxs/
 
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <[e-mail]>

arch/arm/configs/at91cap9adk_defconfig arch/arm/configs/at91sam9rl_defconfig

···
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91CAP9=y
-CONFIG_MACH_AT91CAP9ADK=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
+CONFIG_ARCH_AT91SAM9RL=y
+CONFIG_MACH_AT91SAM9RLEK=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
 CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
-CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=24576
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
 # CONFIG_SERIO is not set
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
+CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_FS=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

arch/arm/configs/at91rm9200_defconfig

···
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
···
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
···
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
 CONFIG_MTD_CHAR=y
···
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_EEPROM_LEGACY=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
···
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_TUN=m
+CONFIG_ARM_AT91_ETHER=y
 CONFIG_PHYLIB=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_MICREL_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_PPP=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=y
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
···
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
 CONFIG_USB_EPSON2888=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
···
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_LEGACY_PTY_COUNT=32
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
···
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_SMB_FS=m
 CONFIG_CIFS=m
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
···
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_CRYPTO_PCBC=y
 CONFIG_CRYPTO_SHA1=y

arch/arm/configs/at91sam9260ek_defconfig arch/arm/configs/at91sam9g20_defconfig

···
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_AT91SAM9260EK=y
+CONFIG_ARCH_AT91SAM9G20=y
+CONFIG_MACH_AT91SAM9G20EK=y
+CONFIG_MACH_AT91SAM9G20EK_2MMC=y
+CONFIG_MACH_CPU9G20=y
+CONFIG_MACH_ACMENETUSFOXG20=y
+CONFIG_MACH_PORTUXG20=y
+CONFIG_MACH_STAMP9G20=y
+CONFIG_MACH_PCONTROL_G20=y
+CONFIG_MACH_GSIA18S=y
+CONFIG_MACH_USB_A9G20=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
···
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
+CONFIG_HW_RANDOM=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
+CONFIG_MMC=y
+CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
+CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
 CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set

arch/arm/configs/at91sam9g20ek_defconfig arch/arm/configs/at91cap9_defconfig

···
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G20=y
-CONFIG_MACH_AT91SAM9G20EK=y
-CONFIG_MACH_AT91SAM9G20EK_2MMC=y
+CONFIG_ARCH_AT91CAP9=y
+CONFIG_MACH_AT91CAP9ADK=y
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y
···
 CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_SERIO is not set
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
-CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_AT73C213=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_FB=y
+CONFIG_FB_ATMEL=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_GADGETFS=m
+CONFIG_USB_ETH=m
 CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_USER=y

arch/arm/configs/at91sam9g45_defconfig

···
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9G45=y
 CONFIG_MACH_AT91SAM9M10G45EK=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_SLOW_CLOCK=y
 CONFIG_AEABI=y
···
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_MII=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_DAVICOM_PHY=y
 CONFIG_LIBERTAS_THINFIRM=m
 CONFIG_LIBERTAS_THINFIRM_USB=m
 CONFIG_AT76C50X_USB=m
···
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 # CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
 CONFIG_FB_UDL=m

arch/arm/configs/at91sam9rlek_defconfig arch/arm/configs/at91sam9260_defconfig

···
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9RL=y
-CONFIG_MACH_AT91SAM9RLEK=y
+CONFIG_ARCH_AT91SAM9260=y
+CONFIG_ARCH_AT91SAM9260_SAM9XE=y
+CONFIG_MACH_AT91SAM9260EK=y
+CONFIG_MACH_CAM60=y
+CONFIG_MACH_SAM9_L9260=y
+CONFIG_MACH_AFEB9260=y
+CONFIG_MACH_USB_A9260=y
+CONFIG_MACH_QIL_A9260=y
+CONFIG_MACH_CPU9260=y
+CONFIG_MACH_FLEXIBITY=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
+CONFIG_PACKET=y
 CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_ATMEL_SSC=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
 # CONFIG_SERIO is not set
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
···
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_G_SERIAL=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y

arch/arm/configs/ezx_defconfig

···
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_MMC=y

arch/arm/configs/imote2_defconfig

···
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_MMC=y

arch/arm/configs/magician_defconfig

···
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_USB_GADGETFS=m

arch/arm/configs/omap1_defconfig

···
 CONFIG_MACH_NOKIA770=y
 CONFIG_MACH_AMS_DELTA=y
 CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
 CONFIG_OMAP_ARM_216MHZ=y
 CONFIG_OMAP_ARM_195MHZ=y
 CONFIG_OMAP_ARM_192MHZ=y

arch/arm/configs/u300_defconfig

···
 CONFIG_ARCH_U300=y
 CONFIG_MACH_U300=y
 CONFIG_MACH_U300_BS335=y
-CONFIG_MACH_U300_DUAL_RAM=y
-CONFIG_U300_DEBUG=y
 CONFIG_MACH_U300_SPIDUMMY=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
···
 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
 CONFIG_CPU_IDLE=y
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 # CONFIG_SUSPEND is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_MISC_DEVICES is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_HWMON is not set
···
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
···
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRC32 is not set

arch/arm/configs/u8500_defconfig

···
 CONFIG_ARCH_U8500=y
 CONFIG_UX500_SOC_DB5500=y
 CONFIG_UX500_SOC_DB8500=y
-CONFIG_MACH_U8500=y
+CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
 CONFIG_NO_HZ=y
···
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
···
 CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
···
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
-# CONFIG_HWMON is not set
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
+CONFIG_AB5500_CORE=y
 CONFIG_AB8500_CORE=y
 CONFIG_REGULATOR_AB8500=y
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_MUSB_PIO_ONLY=y
 CONFIG_USB_GADGET=y
 CONFIG_AB8500_USB=y
 CONFIG_MMC=y
···
 CONFIG_STE_DMA40=y
 CONFIG_STAGING=y
 CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
+CONFIG_HSEM_U8500=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y

arch/arm/configs/zeus_defconfig

···
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m

arch/arm/mach-exynos/cpuidle.c

···
 #include <linux/init.h>
 #include <linux/cpuidle.h>
 #include <linux/io.h>
+#include <linux/export.h>
+#include <linux/time.h>
 
 #include <asm/proc-fns.h>
 

arch/arm/mach-highbank/highbank.c

···
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
+#include <linux/smp.h>
 
 #include <asm/cacheflush.h>
 #include <asm/unified.h>
···
 
 void highbank_set_cpu_jump(int cpu, void *jump_addr)
 {
+#ifdef CONFIG_SMP
+	cpu = cpu_logical_map(cpu);
+#endif
 	writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
 	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
 	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),

arch/arm/mach-imx/Kconfig

···
 config HAVE_IMX_SRC
 	bool
 
-#
-# ARCH_MX31 and ARCH_MX35 are left for compatibility
-# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
-# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
-# more sensible) names are used: SOC_IMX31 and SOC_IMX35
 config ARCH_MX1
 	bool
 
···
 	bool
 
 config MACH_MX27
-	bool
-
-config ARCH_MX31
-	bool
-
-config ARCH_MX35
 	bool
 
 config SOC_IMX1
···
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select ARCH_MXC_AUDMUX_V2
-	select ARCH_MX31
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 
···
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select HAVE_EPIT
-	select ARCH_MX35
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 

arch/arm/mach-imx/clock-imx6q.c

···
 	imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
 };
 
+void __init imx6q_clock_map_io(void)
+{
+	iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
+}
+
 int __init mx6q_clocks_init(void)
 {
 	struct device_node *np;
 	void __iomem *base;
 	int i, irq;
-
-	iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
 
 	/* retrieve the freqency of fixed clocks from device tree */
 	for_each_compatible_node(np, NULL, "fixed-clock") {

arch/arm/mach-imx/mach-imx6q.c

···
 {
 	imx_lluart_map_io();
 	imx_scu_map_io();
+	imx6q_clock_map_io();
 }
 
 static void __init imx6q_gpio_add_irq_domain(struct device_node *np,

arch/arm/mach-imx/mm-imx3.c

···
 static void imx3_idle(void)
 {
 	unsigned long reg = 0;
-	__asm__ __volatile__(
-		/* disable I and D cache */
-		"mrc p15, 0, %0, c1, c0, 0\n"
-		"bic %0, %0, #0x00001000\n"
-		"bic %0, %0, #0x00000004\n"
-		"mcr p15, 0, %0, c1, c0, 0\n"
-		/* invalidate I cache */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c5, 0\n"
-		/* clear and invalidate D cache */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c14, 0\n"
-		/* WFI */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c0, 4\n"
-		"nop\n" "nop\n" "nop\n" "nop\n"
-		"nop\n" "nop\n" "nop\n"
-		/* enable I and D cache */
-		"mrc p15, 0, %0, c1, c0, 0\n"
-		"orr %0, %0, #0x00001000\n"
-		"orr %0, %0, #0x00000004\n"
-		"mcr p15, 0, %0, c1, c0, 0\n"
-		: "=r" (reg));
+
+	if (!need_resched())
+		__asm__ __volatile__(
+			/* disable I and D cache */
+			"mrc p15, 0, %0, c1, c0, 0\n"
+			"bic %0, %0, #0x00001000\n"
+			"bic %0, %0, #0x00000004\n"
+			"mcr p15, 0, %0, c1, c0, 0\n"
+			/* invalidate I cache */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c5, 0\n"
+			/* clear and invalidate D cache */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c14, 0\n"
+			/* WFI */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c0, 4\n"
+			"nop\n" "nop\n" "nop\n" "nop\n"
+			"nop\n" "nop\n" "nop\n"
+			/* enable I and D cache */
+			"mrc p15, 0, %0, c1, c0, 0\n"
+			"orr %0, %0, #0x00001000\n"
+			"orr %0, %0, #0x00000004\n"
+			"mcr p15, 0, %0, c1, c0, 0\n"
+			: "=r" (reg));
+	local_irq_enable();
 }
 
 static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
···
 	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
 }
 
+#ifdef CONFIG_SOC_IMX31
 static struct map_desc mx31_io_desc[] __initdata = {
 	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
 	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
···
 	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
 }
 
-static struct map_desc mx35_io_desc[] __initdata = {
-	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
-	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
 void __init imx31_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
 	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-	imx_idle = imx3_idle;
-	imx_ioremap = imx3_ioremap;
-}
-
-void __init imx35_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX35);
-	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-	imx_idle = imx3_idle;
+	pm_idle = imx3_idle;
 	imx_ioremap = imx3_ioremap;
 }
 
 void __init mx31_init_irq(void)
 {
 	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-}
-
-void __init mx35_init_irq(void)
-{
-	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
 }
 
 static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
···
 	}
 
 	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
+}
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+static struct map_desc mx35_io_desc[] __initdata = {
+	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx35_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+	pm_idle = imx3_idle;
+	imx_ioremap = imx3_ioremap;
+}
+
+void __init mx35_init_irq(void)
+{
+	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
 }
 
 static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
···
 
 	imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
 }
+#endif /* ifdef CONFIG_SOC_IMX35 */

arch/arm/mach-imx/src.c

···
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/smp.h>
 #include <asm/unified.h>
 
 #define SRC_SCR				0x000
···
 
 static void __iomem *src_base;
 
+#ifndef CONFIG_SMP
+#define cpu_logical_map(cpu)		0
+#endif
+
 void imx_enable_cpu(int cpu, bool enable)
 {
 	u32 mask, val;
 
+	cpu = cpu_logical_map(cpu);
 	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
 	val = readl_relaxed(src_base + SRC_SCR);
 	val = enable ? val | mask : val & ~mask;
···
 
 void imx_set_cpu_jump(int cpu, void *jump_addr)
 {
+	cpu = cpu_logical_map(cpu);
 	writel_relaxed(BSYM(virt_to_phys(jump_addr)),
 		       src_base + SRC_GPR1 + cpu * 8);
 }

arch/arm/mach-mmp/gplugd.c

···
 
 	/* on-chip devices */
 	pxa168_add_uart(3);
-	pxa168_add_ssp(0);
+	pxa168_add_ssp(1);
 	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
 
 	pxa168_add_eth(&gplugd_eth_platform_data);

arch/arm/mach-mmp/include/mach/gpio-pxa.h

···
 #define GPIO_REGS_VIRT	(APB_VIRT_BASE + 0x19000)
 
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x)	(GPIO_REGS_VIRT + (x))
+#define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
 
 #define NR_BUILTIN_GPIO		IRQ_GPIO_NUM
 

arch/arm/mach-mx5/cpu.c

···
 #include <linux/init.h>
 #include <linux/module.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static int mx5_cpu_rev = -1;
 
···
 	if (!cpu_is_mx51())
 		return 0;
 
-	if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) {
+	if (mx51_revision() < IMX_CHIP_REVISION_3_0 &&
+			(elf_hwcap & HWCAP_NEON)) {
 		elf_hwcap &= ~HWCAP_NEON;
 		pr_info("Turning off NEON support, detected broken NEON implementation\n");
 	}

arch/arm/mach-mx5/mm.c

···
 
 static void imx5_idle(void)
 {
-	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	if (!need_resched())
+		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	local_irq_enable();
 }
 
 /*
···
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-	imx_idle = imx5_idle;
+	pm_idle = imx5_idle;
 }
 
 void __init imx53_init_early(void)

arch/arm/mach-mxs/clock-mx28.c

···
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
 	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg | (1 << clk->enable_shift)) {				\
+	if (reg & (1 << clk->enable_shift)) {				\
 		pr_err("%s: clock is gated\n", __func__);		\
 		return -EINVAL;						\
 	}								\

arch/arm/mach-omap1/Kconfig

···
 comment "OMAP CPU Speed"
 	depends on ARCH_OMAP1
 
-config OMAP_CLOCKS_SET_BY_BOOTLOADER
-	bool "OMAP clocks set by bootloader"
-	depends on ARCH_OMAP1
-	help
-	  Enable this option to prevent the kernel from overriding the clock
-	  frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
-	  internal LCD controller and MPU peripherals.
-
 config OMAP_ARM_216MHZ
 	bool "OMAP ARM 216 MHz CPU (1710 only)"
         depends on ARCH_OMAP1 && ARCH_OMAP16XX

arch/arm/mach-omap1/board-ams-delta.c

···
 	omap_cfg_reg(J19_1610_CAM_D6);
 	omap_cfg_reg(J18_1610_CAM_D7);
 
-	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
-
 	omap_board_config = ams_delta_config;
 	omap_board_config_size = ARRAY_SIZE(ams_delta_config);
 	omap_serial_init();
···
 }
 arch_initcall(ams_delta_modem_init);
 
+static void __init ams_delta_map_io(void)
+{
+	omap15xx_map_io();
+	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
+}
+
 MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	/* Maintainer: Jonathan McDowell <[e-mail]> */
 	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
+	.map_io		= ams_delta_map_io,
 	.init_early	= omap1_init_early,
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,

arch/arm/mach-omap1/clock.h

···
 
 #include <plat/clock.h>
 
-extern int __init omap1_clk_init(void);
+int omap1_clk_init(void);
+void omap1_clk_late_init(void);
 extern int omap1_clk_enable(struct clk *clk);
 extern void omap1_clk_disable(struct clk *clk);
 extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);

arch/arm/mach-omap1/clock_data.c

···
 	.clk_disable_unused	= omap1_clk_disable_unused,
 };
 
+static void __init omap1_show_rates(void)
+{
+	pr_notice("Clocking rate (xtal/DPLL1/MPU): "
+			"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+		ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+		ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+		arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+}
+
 int __init omap1_clk_init(void)
 {
 	struct omap_clk *c;
···
 	/* We want to be in syncronous scalable mode */
 	omap_writew(0x1000, ARM_SYSST);
 
-#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
-	/* Use values set by bootloader. Determine PLL rate and recalculate
-	 * dependent clocks as if kernel had changed PLL or divisors.
+
+	/*
+	 * Initially use the values set by bootloader. Determine PLL rate and
+	 * recalculate dependent clocks as if kernel had changed PLL or
+	 * divisors. See also omap1_clk_late_init() that can reprogram dpll1
+	 * after the SRAM is initialized.
 	 */
 	{
 		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
···
 			}
 		}
 	}
-#else
-	/* Find the highest supported frequency and enable it */
-	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
-		printk(KERN_ERR "System frequencies not set. Check your config.\n");
-		/* Guess sane values (60MHz) */
-		omap_writew(0x2290, DPLL_CTL);
-		omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
-		ck_dpll1.rate = 60000000;
-	}
-#endif
 	propagate_rate(&ck_dpll1);
 	/* Cache rates for clocks connected to ck_ref (not dpll1) */
 	propagate_rate(&ck_ref);
-	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
-		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-
+	omap1_show_rates();
 	if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
 		/* Select slicer output as OMAP input clock */
 		omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
···
 		clk_enable(&arm_gpio_ck);
 
 	return 0;
+}
+
+#define OMAP1_DPLL1_SANE_VALUE	60000000
+
+void __init omap1_clk_late_init(void)
+{
+	if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE)
+		return;
+
+	/* Find the highest supported frequency and enable it */
+	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+		pr_err("System frequencies not set, using default. Check your config.\n");
+		omap_writew(0x2290, DPLL_CTL);
+		omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
+		ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
+	}
+	propagate_rate(&ck_dpll1);
+	omap1_show_rates();
 }

arch/arm/mach-omap1/devices.c

···
 #include <plat/omap7xx.h>
 #include <plat/mcbsp.h>
 
+#include "clock.h"
+
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
···
 		return -ENODEV;
 
 	omap_sram_init();
+	omap1_clk_late_init();
 
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.

arch/arm/mach-omap2/Kconfig

···
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"
 	depends on ARCH_OMAP3
+	select ARM_AMBA
 	select OC_ETM
 	help
 	  Say Y here to enable debugging hardware of omap3

arch/arm/mach-omap2/Makefile

···
 
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
-	 common.o gpio.o dma.o wd_timer.o
+	 common.o gpio.o dma.o wd_timer.o display.o
 
 omap-2-3-common				= irq.o sdrc.o
 hwmod-common				= omap_hwmod.o \
···
 smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
 obj-y					+= $(smsc911x-m) $(smsc911x-y)
 obj-$(CONFIG_ARCH_OMAP4)		+= hwspinlock.o
-
-disp-$(CONFIG_OMAP2_DSS)		:= display.o
-obj-y					+= $(disp-m) $(disp-y)
 
 obj-y					+= common-board-devices.o twl-common.o

arch/arm/mach-omap2/cpuidle34xx.c

···
 
 #include <linux/sched.h>
 #include <linux/cpuidle.h>
+#include <linux/export.h>
 
 #include <plat/prcm.h>
 #include <plat/irqs.h>

arch/arm/mach-omap2/display.c

···
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 #include <plat/omap-pm.h>
+#include <plat/common.h>
 
 #include "control.h"
+#include "display.h"
+
+#define DISPC_CONTROL		0x0040
+#define DISPC_CONTROL2		0x0238
+#define DISPC_IRQSTATUS		0x0018
+
+#define DSS_SYSCONFIG		0x10
+#define DSS_SYSSTATUS		0x14
+#define DSS_CONTROL		0x40
+#define DSS_SDI_CONTROL		0x44
+#define DSS_PLL_CONTROL		0x48
+
+#define LCD_EN_MASK		(0x1 << 0)
+#define DIGIT_EN_MASK		(0x1 << 1)
+
+#define FRAMEDONE_IRQ_SHIFT	0
+#define EVSYNC_EVEN_IRQ_SHIFT	2
+#define EVSYNC_ODD_IRQ_SHIFT	3
+#define FRAMEDONE2_IRQ_SHIFT	22
+#define FRAMEDONETV_IRQ_SHIFT	24
+
+/*
+ * FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC
+ *     reset before deciding that something has gone wrong
+ */
+#define FRAMEDONE_IRQ_TIMEOUT		100
 
 static struct platform_device omap_display_device = {
 	.name          = "omapdss",
···
 	r = platform_device_register(&omap_display_device);
 	if (r < 0)
 		printk(KERN_ERR "Unable to register OMAP-Display device\n");
+
+	return r;
+}
+
+static void dispc_disable_outputs(void)
+{
+	u32 v, irq_mask = 0;
+	bool lcd_en, digit_en, lcd2_en = false;
+	int i;
+	struct omap_dss_dispc_dev_attr *da;
+	struct omap_hwmod *oh;
+
+	oh = omap_hwmod_lookup("dss_dispc");
+	if (!oh) {
+		WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n");
+		return;
+	}
+
+	if (!oh->dev_attr) {
+		pr_err("display: could not disable outputs during reset due to missing dev_attr\n");
+		return;
+	}
+
+	da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr;
+
+	/* store value of LCDENABLE and DIGITENABLE bits */
+	v = omap_hwmod_read(oh, DISPC_CONTROL);
+	lcd_en = v & LCD_EN_MASK;
+	digit_en = v & DIGIT_EN_MASK;
+
+	/* store value of LCDENABLE for LCD2 */
+	if (da->manager_count > 2) {
+		v = omap_hwmod_read(oh, DISPC_CONTROL2);
+		lcd2_en = v & LCD_EN_MASK;
+	}
+
+	if (!(lcd_en | digit_en | lcd2_en))
+		return; /* no managers currently enabled */
+
+	/*
+	 * If any manager was enabled, we need to disable it before
+	 * DSS clocks are disabled or DISPC module is reset
+	 */
+	if (lcd_en)
+		irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT;
+
+	if (digit_en) {
+		if (da->has_framedonetv_irq) {
+			irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT;
+		} else {
+			irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT |
+				1 << EVSYNC_ODD_IRQ_SHIFT;
+		}
+	}
+
+	if (lcd2_en)
+		irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT;
+
+	/*
+	 * clear any previous FRAMEDONE, FRAMEDONETV,
+	 * EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts
+	 */
+	omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS);
+
+	/* disable LCD and TV managers */
+	v = omap_hwmod_read(oh, DISPC_CONTROL);
+	v &= ~(LCD_EN_MASK | DIGIT_EN_MASK);
+	omap_hwmod_write(v, oh, DISPC_CONTROL);
+
+	/* disable LCD2 manager */
+	if (da->manager_count > 2) {
+		v = omap_hwmod_read(oh, DISPC_CONTROL2);
+		v &= ~LCD_EN_MASK;
+		omap_hwmod_write(v, oh, DISPC_CONTROL2);
+	}
+
+	i = 0;
+	while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) !=
+	       irq_mask) {
+		i++;
+		if (i > FRAMEDONE_IRQ_TIMEOUT) {
+			pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n");
+			break;
+		}
+		mdelay(1);
+	}
+}
+
+#define MAX_MODULE_SOFTRESET_WAIT	10000
+int omap_dss_reset(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	int c = 0;
+	int i, r;
+
+	if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) {
+		pr_err("dss_core: hwmod data doesn't contain reset data\n");
+		return -EINVAL;
+	}
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk)
+			clk_enable(oc->_clk);
+
+	dispc_disable_outputs();
+
+	/* clear SDI registers */
+	if (cpu_is_omap3430()) {
+		omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL);
+		omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL);
+	}
+
+	/*
+	 * clear DSS_CONTROL register to switch DSS clock sources to
+	 * PRCM clock, if any
+	 */
+	omap_hwmod_write(0x0, oh, DSS_CONTROL);
+
+	omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
+				& SYSS_RESETDONE_MASK),
+			MAX_MODULE_SOFTRESET_WAIT, c);
+
+	if (c == MAX_MODULE_SOFTRESET_WAIT)
+		pr_warning("dss_core: waiting for reset to finish failed\n");
+	else
+		pr_debug("dss_core: softreset done\n");
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk)
+			clk_disable(oc->_clk);
+
+	r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
 
 	return r;
 }

arch/arm/mach-omap2/display.h

···
+/*
+ * display.h - OMAP2+ integration-specific DSS header
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_DISPLAY_H
+#define __ARCH_ARM_MACH_OMAP2_DISPLAY_H
+
+#include <linux/kernel.h>
+
+struct omap_dss_dispc_dev_attr {
+	u8	manager_count;
+	bool	has_framedonetv_irq;
+};
+
+#endif

arch/arm/mach-omap2/omap_hwmod.c

···
 		ohii = &oh->mpu_irqs[i++];
 	} while (ohii->irq != -1);
 
-	return i;
+	return i-1;
 }
 
 /**
···
 		ohdi = &oh->sdma_reqs[i++];
 	} while (ohdi->dma_req != -1);
 
-	return i;
+	return i-1;
 }
 
 /**
···
 		mem = &os->addr[i++];
 	} while (mem->pa_start != mem->pa_end);
 
-	return i;
+	return i-1;
 }
 
 /**

arch/arm/mach-omap2/omap_hwmod_2420_data.c

···
 };
 
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+	/*
+	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+	 * driver does not use these clocks.
+	 */
 	{ .role = "tv_clk", .clk = "dss_54m_fck" },
 	{ .role = "sys_clk", .clk = "dss2_fck" },
 };
···
 	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_slaves),
 	.masters	= omap2420_dss_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2420_dss_masters),
-	.flags		= HWMOD_NO_IDLEST,
+	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 };
 
 /* l4_core -> dss_dispc */
···
 	.slaves		= omap2420_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_dispc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr
 };
 
 /* l4_core -> dss_rfbi */
···
 	&omap2420_l4_core__dss_rfbi,
 };
 
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "dss_ick" },
+};
+
 static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
 	.name		= "dss_rfbi",
 	.class		= &omap2_rfbi_hwmod_class,
···
 			.module_offs = CORE_MOD,
 		},
 	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
 	.slaves		= omap2420_dss_rfbi_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_rfbi_slaves),
 	.flags		= HWMOD_NO_IDLEST,
···
 static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
 	.master		= &omap2420_l4_core_hwmod,
 	.slave		= &omap2420_dss_venc_hwmod,
-	.clk		= "dss_54m_fck",
+	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
 	.fw = {
 		.omap2 = {
···
 static struct omap_hwmod omap2420_dss_venc_hwmod = {
 	.name		= "dss_venc",
 	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss1_fck",
+	.main_clk	= "dss_54m_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,

arch/arm/mach-omap2/omap_hwmod_2430_data.c

···
 };
 
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+	/*
+	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+	 * driver does not use these clocks.
+	 */
 	{ .role = "tv_clk", .clk = "dss_54m_fck" },
 	{ .role = "sys_clk", .clk = "dss2_fck" },
 };
···
 	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_slaves),
 	.masters	= omap2430_dss_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2430_dss_masters),
-	.flags		= HWMOD_NO_IDLEST,
+	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 };
 
 /* l4_core -> dss_dispc */
···
 	.slaves		= omap2430_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_dispc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr
 };
 
 /* l4_core -> dss_rfbi */
···
 	&omap2430_l4_core__dss_rfbi,
 };
 
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "dss_ick" },
+};
+
 static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
 	.name		= "dss_rfbi",
 	.class		= &omap2_rfbi_hwmod_class,
···
 			.module_offs = CORE_MOD,
 		},
 	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
 	.slaves		= omap2430_dss_rfbi_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_rfbi_slaves),
 	.flags		= HWMOD_NO_IDLEST,
···
 static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
 	.master		= &omap2430_l4_core_hwmod,
 	.slave		= &omap2430_dss_venc_hwmod,
-	.clk		= "dss_54m_fck",
+	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
 	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
···
 static struct omap_hwmod omap2430_dss_venc_hwmod = {
 	.name		= "dss_venc",
 	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss1_fck",
+	.main_clk	= "dss_54m_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,

arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c

···
 #include <plat/omap_hwmod.h>
 #include <plat/serial.h>
 #include <plat/dma.h>
+#include <plat/common.h>
 
 #include <mach/irqs.h>
 
···
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
 struct omap_hwmod_class omap2_dss_hwmod_class = {
 	.name	= "dss",
 	.sysc	= &omap2_dss_sysc,
+	.reset	= omap_dss_reset,
 };
 
 /*

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

···
 };
 
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
-	{ .role = "tv_clk", .clk = "dss_tv_fck" },
-	{ .role = "video_clk", .clk = "dss_96m_fck" },
+	/*
+	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+	 * driver does not use these clocks.
+	 */
 	{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
+	{ .role = "tv_clk", .clk = "dss_tv_fck" },
+	/* required only on OMAP3430 */
+	{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
 };
 
 static struct omap_hwmod omap3430es1_dss_core_hwmod = {
···
 	.slaves_cnt	= ARRAY_SIZE(omap3430es1_dss_slaves),
 	.masters	= omap3xxx_dss_masters,
 	.masters_cnt	= ARRAY_SIZE(omap3xxx_dss_masters),
-	.flags		= HWMOD_NO_IDLEST,
+	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 };
 
 static struct omap_hwmod omap3xxx_dss_core_hwmod = {
 	.name		= "dss_core",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.class		= &omap2_dss_hwmod_class,
 	.main_clk	= "dss1_alwon_fck", /* instead of dss_fck */
 	.sdma_reqs	= omap3xxx_dss_sdma_chs,
···
 	.slaves		= omap3xxx_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr
 };
 
 /*
···
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_dss_dsi1_hwmod,
+	.clk		= "dss_ick",
 	.addr		= omap3xxx_dss_dsi1_addrs,
 	.fw = {
 		.omap2 = {
···
 	&omap3xxx_l4_core__dss_dsi1,
 };
 
+static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
+	{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
+};
+
 static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
 	.name		= "dss_dsi1",
 	.class		= &omap3xxx_dsi_hwmod_class,
···
 			.module_offs = OMAP3430_DSS_MOD,
 		},
 	},
+	.opt_clks	= dss_dsi1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_opt_clks),
 	.slaves		= omap3xxx_dss_dsi1_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
 	.flags		= HWMOD_NO_IDLEST,
···
 	&omap3xxx_l4_core__dss_rfbi,
 };
 
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "dss_ick" },
+};
+
 static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
 	.name		= "dss_rfbi",
 	.class		= &omap2_rfbi_hwmod_class,
···
 			.module_offs = OMAP3430_DSS_MOD,
 		},
 	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
 	.slaves		= omap3xxx_dss_rfbi_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
 	.flags		= HWMOD_NO_IDLEST,
···
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_dss_venc_hwmod,
-	.clk		= "dss_tv_fck",
+	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
 	.fw = {
 		.omap2 = {
···
 	&omap3xxx_l4_core__dss_venc,
 };
 
+static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = {
+	/* required only on OMAP3430 */
+	{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
+};
+
 static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
 	.name		= "dss_venc",
 	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss1_alwon_fck",
+	.main_clk	= "dss_tv_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
···
 			.module_offs = OMAP3430_DSS_MOD,
 		},
 	},
+	.opt_clks	= dss_venc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_venc_opt_clks),
 	.slaves		= omap3xxx_dss_venc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_venc_slaves),
 	.flags		= HWMOD_NO_IDLEST,

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

···
 #include <plat/mmc.h>
 #include <plat/i2c.h>
 #include <plat/dmtimer.h>
+#include <plat/common.h>
 
 #include "omap_hwmod_common_data.h"
 
···
 static struct omap_hwmod_class omap44xx_dss_hwmod_class = {
 	.name	= "dss",
 	.sysc	= &omap44xx_dss_sysc,
+	.reset	= omap_dss_reset,
 };
 
 /* dss */
···
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
 	{ .role = "sys_clk", .clk = "dss_sys_clk" },
 	{ .role = "tv_clk", .clk = "dss_tv_clk" },
-	{ .role = "dss_clk", .clk = "dss_dss_clk" },
-	{ .role = "video_clk", .clk = "dss_48mhz_clk" },
+	{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
 };
 
 static struct omap_hwmod omap44xx_dss_hwmod = {
 	.name		= "dss_core",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.class		= &omap44xx_dss_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
 	.main_clk	= "dss_dss_clk",
···
 	{ }
 };
 
+static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = {
+	.manager_count		= 3,
+	.has_framedonetv_irq	= 1
+};
+
 /* l4_per -> dss_dispc */
 static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = {
 	.master		= &omap44xx_l4_per_hwmod,
···
 	&omap44xx_l4_per__dss_dispc,
 };
 
-static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-	{ .role = "tv_clk", .clk = "dss_tv_clk" },
-	{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
-};
-
 static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
 	.name		= "dss_dispc",
 	.class		= &omap44xx_dispc_hwmod_class,
···
 			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
 		},
 	},
-	.opt_clks	= dss_dispc_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_dispc_opt_clks),
 	.slaves		= omap44xx_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_dispc_slaves),
+	.dev_attr	= &omap44xx_dss_dispc_dev_attr
 };
 
 /*
···
 	.clkdm_name	= "l3_dss_clkdm",
 	.mpu_irqs	= omap44xx_dss_hdmi_irqs,
 	.sdma_reqs	= omap44xx_dss_hdmi_sdma_reqs,
-	.main_clk	= "dss_dss_clk",
+	.main_clk	= "dss_48mhz_clk",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
···
 	.name		= "dss_venc",
 	.class		= &omap44xx_venc_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
-	.main_clk	= "dss_dss_clk",
+	.main_clk	= "dss_tv_clk",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,

arch/arm/mach-omap2/omap_hwmod_common_data.c

···
 	.srst_shift	= SYSC_TYPE2_SOFTRESET_SHIFT,
 };
 
+struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {
+	.manager_count		= 2,
+	.has_framedonetv_irq	= 0
+};

arch/arm/mach-omap2/omap_hwmod_common_data.h

···
 
 #include <plat/omap_hwmod.h>
 
+#include "display.h"
+
 /* Common address space across OMAP2xxx */
 extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[];
 extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[];
···
 extern struct omap_hwmod_class omap2xxx_dma_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_mcspi_class;
+
+extern struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr;
 
 #endif

arch/arm/mach-omap2/omap_l3_noc.c

···
 static const struct of_device_id l3_noc_match[] = {
 	{.compatible = "ti,omap4-l3-noc", },
 	{},
-}
+};
 MODULE_DEVICE_TABLE(of, l3_noc_match);
 #else
 #define l3_noc_match NULL

arch/arm/mach-omap2/pm.c

···
 #include "powerdomain.h"
 #include "clockdomain.h"
 #include "pm.h"
+#include "twl-common.h"
 
 static struct omap_device_pm_latency *pm_lats;
 
···
 
 static int __init omap2_common_pm_late_init(void)
 {
-	/* Init the OMAP TWL parameters */
-	omap3_twl_init();
-	omap4_twl_init();
-
 	/* Init the voltage layer */
+	omap_pmic_late_init();
 	omap_voltage_late_init();
 
 	/* Initialize the voltages */

arch/arm/mach-omap2/smartreflex.c

···
 		sr_write_reg(sr_info, ERRCONFIG_V1, status);
 	} else if (sr_info->ip_type == SR_TYPE_V2) {
 		/* Read the status bits */
-		sr_read_reg(sr_info, IRQSTATUS);
+		status = sr_read_reg(sr_info, IRQSTATUS);
 
 		/* Clear them by writing back */
 		sr_write_reg(sr_info, IRQSTATUS, status);

arch/arm/mach-omap2/twl-common.c

···
 #include <plat/usb.h>
 
 #include "twl-common.h"
+#include "pm.h"
 
 static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.addr		= 0x48,
···
 	pmic_i2c_board_info.platform_data = pmic_data;
 
 	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
+}
+
+void __init omap_pmic_late_init(void)
+{
+	/* Init the OMAP TWL parameters (if PMIC has been registerd) */
+	if (!pmic_i2c_board_info.irq)
+		return;
+
+	omap3_twl_init();
+	omap4_twl_init();
 }
 
 #if defined(CONFIG_ARCH_OMAP3)

arch/arm/mach-omap2/twl-common.h

···
 #ifndef __OMAP_PMIC_COMMON__
 #define __OMAP_PMIC_COMMON__
 
+#include <plat/irqs.h>
+
 #define TWL_COMMON_PDATA_USB		(1 << 0)
 #define TWL_COMMON_PDATA_BCI		(1 << 1)
 #define TWL_COMMON_PDATA_MADC		(1 << 2)
···
 
 void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
 		    struct twl4030_platform_data *pmic_data);
+void omap_pmic_late_init(void);
 
 static inline void omap2_pmic_init(const char *pmic_type,
 				   struct twl4030_platform_data *pmic_data)

arch/arm/mach-pxa/balloon3.c

···
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static void balloon3_udc_command(int cmd)
 {
 	if (cmd == PXA2XX_UDC_CMD_CONNECT)

arch/arm/mach-pxa/colibri-pxa320.c

···
 static inline void __init colibri_pxa320_init_eth(void) {}
 #endif /* CONFIG_AX88796 */
 
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
 	.gpio_vbus		= mfp_to_gpio(MFP_PIN_GPIO96),
 	.gpio_pullup		= -1,

arch/arm/mach-pxa/gumstix.c

···
 }
 #endif
 
-#ifdef CONFIG_USB_GADGET_PXA25X
+#ifdef CONFIG_USB_PXA25X
 static struct gpio_vbus_mach_info gumstix_udc_info = {
 	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
 	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,

arch/arm/mach-pxa/include/mach/palm27x.h

···
 #define palm27x_lcd_init(power, mode)	do {} while (0)
 #endif
 
-#if	defined(CONFIG_USB_GADGET_PXA27X) || \
-	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if	defined(CONFIG_USB_PXA27X) || \
+	defined(CONFIG_USB_PXA27X_MODULE)
 extern void __init palm27x_udc_init(int vbus, int pullup,
 					int vbus_inverted);
 #else

arch/arm/mach-pxa/palm27x.c

···
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if	defined(CONFIG_USB_GADGET_PXA27X) || \
-	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if	defined(CONFIG_USB_PXA27X) || \
+	defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info palm27x_udc_info = {
 	.gpio_vbus_inverted	= 1,
 };

arch/arm/mach-pxa/palmtc.c

···
 /******************************************************************************
  * UDC
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE)
+#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
 static struct gpio_vbus_mach_info palmtc_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,

arch/arm/mach-pxa/vpac270.c

···
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
 	.gpio_vbus		= GPIO41_VPAC270_UDC_DETECT,
 	.gpio_pullup		= -1,

arch/arm/mach-s3c64xx/mach-crag6410-module.c

···
  * published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 

arch/arm/plat-mxc/include/mach/common.h

···
 };
 
 extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
-extern void (*imx_idle)(void);
 extern void imx_print_silicon_rev(const char *cpu, int srev);
 
 void avic_handle_irq(struct pt_regs *);
···
 extern void imx53_smd_common_init(void);
 extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_pm_init(void);
+extern void imx6q_clock_map_io(void);
 #endif

arch/arm/plat-mxc/include/mach/mxc.h

···
 #define IMX_CHIP_REVISION_3_3		0x33
 #define IMX_CHIP_REVISION_UNKNOWN	0xff
 
-#define IMX_CHIP_REVISION_1_0_STRING		"1.0"
-#define IMX_CHIP_REVISION_1_1_STRING		"1.1"
-#define IMX_CHIP_REVISION_1_2_STRING		"1.2"
-#define IMX_CHIP_REVISION_1_3_STRING		"1.3"
-#define IMX_CHIP_REVISION_2_0_STRING		"2.0"
-#define IMX_CHIP_REVISION_2_1_STRING		"2.1"
-#define IMX_CHIP_REVISION_2_2_STRING		"2.2"
-#define IMX_CHIP_REVISION_2_3_STRING		"2.3"
-#define IMX_CHIP_REVISION_3_0_STRING		"3.0"
-#define IMX_CHIP_REVISION_3_1_STRING		"3.1"
-#define IMX_CHIP_REVISION_3_2_STRING		"3.2"
-#define IMX_CHIP_REVISION_3_3_STRING		"3.3"
-#define IMX_CHIP_REVISION_UNKNOWN_STRING	"unknown"
-
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
 #endif

arch/arm/plat-mxc/include/mach/system.h

···
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
 #define __ASM_ARCH_MXC_SYSTEM_H__
 
-extern void (*imx_idle)(void);
-
 static inline void arch_idle(void)
 {
-	if (imx_idle != NULL)
-		(imx_idle)();
-	else
-		cpu_do_idle();
+	cpu_do_idle();
 }
 
 void arch_reset(char mode, const char *cmd);

arch/arm/plat-mxc/system.c

···
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>
···
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-void (*imx_idle)(void) = NULL;
 void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
+EXPORT_SYMBOL_GPL(imx_ioremap);
 
 static void __iomem *wdog_base;
 

arch/arm/plat-omap/include/plat/clock.h

···
 	u8			auto_recal_bit;
 	u8			recal_en_bit;
 	u8			recal_st_bit;
-	u8			flags;
 #  endif
+	u8			flags;
 };
 
 #endif

arch/arm/plat-omap/include/plat/common.h

···
 #include <linux/delay.h>
 
 #include <plat/i2c.h>
+#include <plat/omap_hwmod.h>
 
 struct sys_timer;
 
···
 void am35xx_init_early(void);
 void ti816x_init_early(void);
 void omap4430_init_early(void);
+
+extern int omap_dss_reset(struct omap_hwmod *);
 
 void omap_sram_init(void);
 

arch/arm/plat-s3c24xx/cpu-freq-debugfs.c

···
 */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>

arch/arm/plat-s5p/sysmmu.c

···
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/export.h>
 
 #include <asm/pgtable.h>
 

arch/arm/plat-samsung/include/plat/gpio-cfg.h

···
 #ifndef __PLAT_GPIO_CFG_H
 #define __PLAT_GPIO_CFG_H __FILE__
 
+#include<linux/types.h>
+
 typedef unsigned int __bitwise__ samsung_gpio_pull_t;
 typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
 

arch/arm/plat-samsung/pd.c

···
 */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
 #include <linux/pm_runtime.h>

arch/arm/plat-samsung/pwm.c

···
  * the Free Software Foundation; either version 2 of the License.
 */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>

arch/arm/tools/mach-types

···
 thales_adc		MACH_THALES_ADC		THALES_ADC		3492
 ubisys_p9d_evp		MACH_UBISYS_P9D_EVP	UBISYS_P9D_EVP		3493
 atdgp318		MACH_ATDGP318		ATDGP318		3494
+m28evk			MACH_M28EVK		M28EVK			3613
 smdk4212		MACH_SMDK4212		SMDK4212		3638
 smdk4412		MACH_SMDK4412		SMDK4412		3765

include/video/omapdss.h

···
 	void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask);
 };
 
-#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS)
 /* Init with the board info */
 extern int omap_display_init(struct omap_dss_board_info *board_data);
-#else
-static inline int omap_display_init(struct omap_dss_board_info *board_data)
-{
-	return 0;
-}
-#endif
 
 struct omap_display_platform_data {
 	struct omap_dss_board_info *board_data;