Merge tag 'ux500-dts-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt

Ux500 DTS updates for the v5.11 kernels:

- Rename the DSI controllers to match the preferred
schema.
- Pull down the SDI2 feedback clock on the Skomer.
- Add proper supplies to the MaxToch touchscreen on
the Golden.

* tag 'ux500-dts-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: dts: ux500-golden: Add proper supplies to touchscreen
ARM: dts: ux500: skomer: Pull down SDI2 FBCLK
ARM: dts: ux500: Rename DSI controller nodes

Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Arnd Bergmann <[e-mail]>

arch/arm/boot/dts/ste-ab8500.dtsi

···
 		mcde@a0350000 {
 			vana-supply = <&ab8500_ldo_ana_reg>;
 
-			dsi-controller@a0351000 {
+			dsi@a0351000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
-			dsi-controller@a0352000 {
+			dsi@a0352000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
-			dsi-controller@a0353000 {
+			dsi@a0353000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
 		};

arch/arm/boot/dts/ste-ab8505.dtsi

···
 		mcde@a0350000 {
 			vana-supply = <&ab8500_ldo_ana_reg>;
 
-			dsi-controller@a0351000 {
+			dsi@a0351000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
-			dsi-controller@a0352000 {
+			dsi@a0352000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
-			dsi-controller@a0353000 {
+			dsi@a0353000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
 		};

arch/arm/boot/dts/ste-dbx5x0.dtsi

···
 			ranges;
 			status = "disabled";
 
-			dsi0: dsi-controller@a0351000 {
+			dsi0: dsi@a0351000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0351000 0x1000>;
 				clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
···
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
-			dsi1: dsi-controller@a0352000 {
+			dsi1: dsi@a0352000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0352000 0x1000>;
 				clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
···
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
-			dsi2: dsi-controller@a0353000 {
+			dsi2: dsi@a0353000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0353000 0x1000>;
 				/* This DSI port only has the Low Power / Energy Save clock */

arch/arm/boot/dts/ste-href-stuib.dtsi

···
 		mcde@a0350000 {
 			status = "okay";
 
-			dsi-controller@a0351000 {
+			dsi@a0351000 {
 				panel {
 					compatible = "samsung,s6d16d0";
 					reg = <0>;

arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi

···
 		mcde@a0350000 {
 			status = "okay";
 
-			dsi-controller@a0351000 {
+			dsi@a0351000 {
 				panel {
 					compatible = "samsung,s6d16d0";
 					reg = <0>;

arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi

···
 		mcde@a0350000 {
 			status = "okay";
 
-			dsi-controller@a0351000 {
+			dsi@a0351000 {
 				panel {
 					compatible = "sony,acx424akp";
 					reg = <0>;

arch/arm/boot/dts/ste-ux500-samsung-golden.dts

···
 				interrupt-parent = <&gpio6>;
 				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
 
+				/* VDDA is "analog supply", 2.57-3.47 V */
+				vdda-supply = <&ab8500_ldo_aux2_reg>;
+				/* VDD is "digital supply" 1.71-3.47V */
+				vdd-supply = <&ab8500_ldo_aux5_reg>;
+
 				pinctrl-names = "default";
 				pinctrl-0 = <&tsp_default>;
 			};
···
 						regulator-name = "vreg_tsp_a3v3";
 						regulator-min-microvolt = <3300000>;
 						regulator-max-microvolt = <3300000>;
-						regulator-always-on; /* FIXME */
 					};
 
 					ab8500_ldo_aux3 {
···
 						regulator-name = "vreg_tsp_1v8";
 						regulator-min-microvolt = <1800000>;
 						regulator-max-microvolt = <1800000>;
-						regulator-always-on; /* FIXME */
 					};
 
 					ab8500_ldo_aux6 {
···
 			pinctrl-names = "default";
 			pinctrl-0 = <&dsi_default_mode>;
 
-			dsi-controller@a0351000 {
+			dsi@a0351000 {
 				panel@0 {
 					compatible = "samsung,s6e63m0";
 					reg = <0>;

arch/arm/boot/dts/ste-ux500-samsung-skomer.dts

···
 			pinctrl-names = "default";
 			pinctrl-0 = <&dsi_default_mode>;
 
-			dsi-controller@a0351000 {
+			dsi@a0351000 {
 				panel {
 					/* NT35510-based Hydis HVA40WV1 */
 					compatible = "hydis,hva40wv1", "novatek,nt35510";
···
 			default_cfg5 {
 				pins = "GPIO21_AB3"; /* DAT31DIR */
 				ste,config = <&out_hi>;
+			};
+		};
+	};
+
+	/* The unused FBCLK needs to be pulled down on this machine */
+	sdi2 {
+		mc2_a_1_default {
+			default_cfg2 {
+				pins = "GPIO130_C8"; /* FBCLK */
+				ste,config = <&in_pd>;
 			};
 		};
 	};