regulator: s2mps11: fix incorrect register for buck10

For BUCK10 the control registers are wrongly set as buck9 control register
This patch corrects the control registers for buck10

Signed-off-by: Alim Akhtar <[e-mail]>
Signed-off-by: Mark Brown <[e-mail]>
Cc: [e-mail]

drivers/regulator/s2mps11.c

···
 	.min_uV		= S2MPS11_BUCK_MIN2,			\
 	.uV_step	= S2MPS11_BUCK_STEP2,			\
 	.n_voltages	= S2MPS11_BUCK_N_VOLTAGES,		\
-	.vsel_reg	= S2MPS11_REG_B9CTRL2,			\
+	.vsel_reg	= S2MPS11_REG_B10CTRL2,			\
 	.vsel_mask	= S2MPS11_BUCK_VSEL_MASK,		\
-	.enable_reg	= S2MPS11_REG_B9CTRL1,			\
+	.enable_reg	= S2MPS11_REG_B10CTRL1,			\
 	.enable_mask	= S2MPS11_ENABLE_MASK			\
 }