ACPI: Fix whitespace inconsistencies

Replaces spaces with tabs where spaces have been (inconsistently) used
for indentation and removes trailing whitespaces.

Signed-off-by: Maximilian Luz <[e-mail]>
Signed-off-by: Rafael J. Wysocki <[e-mail]>

drivers/acpi/acpi_video.c

···
 				ACPI_VIDEO_FIRST_LEVEL - 1 - bqc_value;
 
 		level = device->brightness->levels[bqc_value +
-		                                   ACPI_VIDEO_FIRST_LEVEL];
+						   ACPI_VIDEO_FIRST_LEVEL];
 	} else {
 		level = bqc_value;
 	}
···
 		goto out_free_levels;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-	                  "found %d brightness levels\n",
-	                  br->count - ACPI_VIDEO_FIRST_LEVEL));
+			  "found %d brightness levels\n",
+			  br->count - ACPI_VIDEO_FIRST_LEVEL));
 	return 0;
 
 out_free_levels:

drivers/acpi/battery.c

···
 	 */
 	if ((battery->state & ACPI_BATTERY_STATE_CRITICAL) ||
 	    (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) &&
-            (battery->capacity_now <= battery->alarm)))
+	     (battery->capacity_now <= battery->alarm)))
 		acpi_pm_wakeup_event(&battery->device->dev);
 
 	return result;

drivers/acpi/event.c

···
 	event.type = type;
 	event.data = data;
 	return (blocking_notifier_call_chain(&acpi_chain_head, 0, (void *)&event)
-                        == NOTIFY_BAD) ? -EINVAL : 0;
+			== NOTIFY_BAD) ? -EINVAL : 0;
 }
 EXPORT_SYMBOL(acpi_notifier_call_chain);
 

drivers/acpi/internal.h

···
 void acpi_power_add_remove_device(struct acpi_device *adev, bool add);
 int acpi_power_wakeup_list_init(struct list_head *list, int *system_level);
 int acpi_device_sleep_wake(struct acpi_device *dev,
-                           int enable, int sleep_state, int dev_state);
+			   int enable, int sleep_state, int dev_state);
 int acpi_power_get_inferred_state(struct acpi_device *device, int *state);
 int acpi_power_on_resources(struct acpi_device *device, int state);
 int acpi_power_transition(struct acpi_device *device, int state);

drivers/acpi/nfit/core.c

···
  * these commands.
  */
 enum nfit_aux_cmds {
-        NFIT_CMD_TRANSLATE_SPA = 5,
-        NFIT_CMD_ARS_INJECT_SET = 7,
-        NFIT_CMD_ARS_INJECT_CLEAR = 8,
-        NFIT_CMD_ARS_INJECT_GET = 9,
+	NFIT_CMD_TRANSLATE_SPA = 5,
+	NFIT_CMD_ARS_INJECT_SET = 7,
+	NFIT_CMD_ARS_INJECT_CLEAR = 8,
+	NFIT_CMD_ARS_INJECT_GET = 9,
 };
 
 static void acpi_nfit_init_dsms(struct acpi_nfit_desc *acpi_desc)
···
 	nfit_blk->bdw_offset = nfit_mem->bdw->offset;
 	mmio = &nfit_blk->mmio[BDW];
 	mmio->addr.base = devm_nvdimm_memremap(dev, nfit_mem->spa_bdw->address,
-                        nfit_mem->spa_bdw->length, nd_blk_memremap_flags(ndbr));
+			nfit_mem->spa_bdw->length, nd_blk_memremap_flags(ndbr));
 	if (!mmio->addr.base) {
 		dev_dbg(dev, "%s failed to map bdw\n",
 				nvdimm_name(nvdimm));

drivers/acpi/pci_irq.c

···
 	 * configure the IRQ assigned to this slot|dev|pin.  The 'source_index'
 	 * indicates which resource descriptor in the resource template (of
 	 * the link device) this interrupt is allocated from.
-	 * 
+	 *
 	 * NOTE: Don't query the Link Device for IRQ information at this time
 	 *       because Link Device enumeration may not have occurred yet
 	 *       (e.g. exists somewhere 'below' this _PRT entry in the ACPI

drivers/acpi/pci_link.c

···
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <[e-mail]>
  *  Copyright (C) 2002       Dominik Brodowski <[e-mail]>
  *
- * TBD: 
- *      1. Support more than one IRQ resource entry per link device (index).
+ * TBD:
+ *	1. Support more than one IRQ resource entry per link device (index).
  *	2. Implement start/stop mechanism and use ACPI Bus Driver facilities
  *	   for IRQ management (e.g. start()->_SRS).
  */
···
 		}
 	}
 
-	/* 
-	 * Query and parse _CRS to get the current IRQ assignment. 
+	/*
+	 * Query and parse _CRS to get the current IRQ assignment.
 	 */
 
 	status = acpi_walk_resources(link->device->handle, METHOD_NAME__CRS,
···
 /*
  * "acpi_irq_balance" (default in APIC mode) enables ACPI to use PIC Interrupt
  * Link Devices to move the PIRQs around to minimize sharing.
- * 
+ *
  * "acpi_irq_nobalance" (default in PIC mode) tells ACPI not to move any PIC IRQs
  * that the BIOS has already set to active.  This is necessary because
  * ACPI has no automatic means of knowing what ISA IRQs are used.  Note that
···
  *
  * Note that PCI IRQ routers have a list of possible IRQs,
  * which may not include the IRQs this table says are available.
- * 
+ *
  * Since this heuristic can't tell the difference between a link
  * that no device will attach to, vs. a link which may be shared
  * by multiple active devices -- it is not optimal.

drivers/acpi/pci_mcfg.c

···
 {
 	if (!memcmp(f->oem_id, mcfg_oem_id, ACPI_OEM_ID_SIZE) &&
 	    !memcmp(f->oem_table_id, mcfg_oem_table_id,
-	            ACPI_OEM_TABLE_ID_SIZE) &&
+		    ACPI_OEM_TABLE_ID_SIZE) &&
 	    f->oem_revision == mcfg_oem_revision &&
 	    f->segment == segment &&
 	    resource_contains(&f->bus_range, bus_range))

drivers/acpi/power.c

···
  * 1. via "Device Specific (D-State) Control"
  * 2. via "Power Resource Control".
  * The code below deals with ACPI Power Resources control.
- * 
+ *
  * An ACPI "power resource object" represents a software controllable power
  * plane, clock plane, or other resource depended on by a device.
  *
···
  * -ENODEV if the execution of either _DSW or _PSW has failed
  */
 int acpi_device_sleep_wake(struct acpi_device *dev,
-                           int enable, int sleep_state, int dev_state)
+			   int enable, int sleep_state, int dev_state)
 {
 	union acpi_object in_arg[3];
 	struct acpi_object_list arg_list = { 3, in_arg };
···
 
 /*
  * Prepare a wakeup device, two steps (Ref ACPI 2.0:P229):
- * 1. Power on the power resources required for the wakeup device 
+ * 1. Power on the power resources required for the wakeup device
  * 2. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power
  *    State Wake) for the device, if present
  */

drivers/acpi/processor_perflib.c

···
 				  (u32) px->control, (u32) px->status));
 
 		/*
- 		 * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
+		 * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
 		 */
 		if (!px->core_frequency ||
 		    ((u32)(px->core_frequency * 1000) !=
···
 		goto err_ret;
 
 	/*
-	 * Now that we have _PSD data from all CPUs, lets setup P-state 
+	 * Now that we have _PSD data from all CPUs, lets setup P-state
 	 * domain info.
 	 */
 	for_each_possible_cpu(i) {
···
 			if (match_pdomain->domain != pdomain->domain)
 				continue;
 
-			match_pr->performance->shared_type = 
+			match_pr->performance->shared_type =
 					pr->performance->shared_type;
 			cpumask_copy(match_pr->performance->shared_cpu_map,
 				     pr->performance->shared_cpu_map);

drivers/acpi/sbs.c

···
 					 state_readers[i].mode,
 					 ACPI_SBS_BATTERY,
 					 state_readers[i].command,
-				         (u8 *)battery +
+					 (u8 *)battery +
 						state_readers[i].offset);
 		if (result)
 			goto end;

drivers/acpi/sbshc.c

···
 EXPORT_SYMBOL_GPL(acpi_smbus_write);
 
 int acpi_smbus_register_callback(struct acpi_smb_hc *hc,
-			         smbus_alarm_callback callback, void *context)
+				 smbus_alarm_callback callback, void *context)
 {
 	mutex_lock(&hc->lock);
 	hc->callback = callback;

drivers/acpi/sbshc.h

···
 typedef void (*smbus_alarm_callback)(void *context);
 
 extern int acpi_smbus_read(struct acpi_smb_hc *hc, u8 protocol, u8 address,
-	       u8 command, u8 * data);
+		u8 command, u8 *data);
 extern int acpi_smbus_write(struct acpi_smb_hc *hc, u8 protocol, u8 slave_address,
-		u8 command, u8 * data, u8 length);
+		u8 command, u8 *data, u8 length);
 extern int acpi_smbus_register_callback(struct acpi_smb_hc *hc,
-			         smbus_alarm_callback callback, void *context);
+		smbus_alarm_callback callback, void *context);
 extern int acpi_smbus_unregister_callback(struct acpi_smb_hc *hc);

drivers/acpi/video_detect.c

···
 		DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"),
 		},
 	},
-        {
-         .callback = video_detect_force_video,
-         .ident = "ThinkPad X201T",
-         .matches = {
-                DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-                DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201T"),
-                },
-        },
+	{
+	 .callback = video_detect_force_video,
+	 .ident = "ThinkPad X201T",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201T"),
+		},
+	},
 
 	/* The native backlight controls do not work on some older machines */
 	{

drivers/acpi/wakeup.c

···
 		if (!dev->wakeup.flags.valid
 		    || sleep_state > (u32) dev->wakeup.sleep_state
 		    || !(device_may_wakeup(&dev->dev)
-		        || dev->wakeup.prepare_count))
+			 || dev->wakeup.prepare_count))
 			continue;
 
 		if (device_may_wakeup(&dev->dev))
···
 		if (!dev->wakeup.flags.valid
 		    || sleep_state > (u32) dev->wakeup.sleep_state
 		    || !(device_may_wakeup(&dev->dev)
-		        || dev->wakeup.prepare_count))
+			 || dev->wakeup.prepare_count))
 			continue;
 
 		acpi_set_gpe_wake_mask(dev->wakeup.gpe_device, dev->wakeup.gpe_number,