ARM: dts: exynos: Move pmu and timer nodes out of soc

The ARM PMU and ARM architected timer nodes are part of ARM CPU design
therefore they should not be inside the soc node. This also fixes DTC
W=1 warnings like:

arch/arm/boot/dts/exynos3250.dtsi:106.21-135.5:
Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property
arch/arm/boot/dts/exynos3250.dtsi:676.7-680.5:
Warning (simple_bus_reg): /soc/pmu: missing or empty reg/ranges property

Signed-off-by: Krzysztof Kozlowski <[e-mail]>
Tested-by: Marek Szyprowski <[e-mail]>

arch/arm/boot/dts/exynos3250.dtsi

···
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
···
 				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			#pwm-cells = <3>;
 			status = "disabled";
-		};
-
-		pmu {
-			compatible = "arm,cortex-a7-pmu";
-			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		ppmu_dmc0: ppmu_dmc0@106a0000 {

arch/arm/boot/dts/exynos4.dtsi

···
 		serial3 = &serial_3;
 	};
 
+	pmu: pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <2 2>, <3 2>;
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
···
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0x10440000 0x1000>;
-		};
-
-		pmu: pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupt-parent = <&combiner>;
-			interrupts = <2 2>, <3 2>;
 		};
 
 		sys_reg: syscon@10010000 {

arch/arm/boot/dts/exynos5250.dtsi

···
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <1 2>, <22 4>;
+	};
+
 	soc: soc {
 		sysram@2020000 {
 			compatible = "mmio-sram";
···
 			power-domains = <&pd_mau>;
 		};
 
-		timer {
-			compatible = "arm,armv7-timer";
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-			/*
-			 * Unfortunately we need this since some versions
-			 * of U-Boot on Exynos don't set the CNTFRQ register,
-			 * so we need the value from DT.
-			 */
-			clock-frequency = <24000000>;
-		};
-
 		mct@101c0000 {
 			compatible = "samsung,exynos4210-mct";
 			reg = <0x101C0000 0x800>;
···
 						<0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
 						<0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
 			};
-		};
-
-		pmu {
-			compatible = "arm,cortex-a15-pmu";
-			interrupt-parent = <&combiner>;
-			interrupts = <1 2>, <22 4>;
 		};
 
 		pinctrl_0: pinctrl@11400000 {
···
 			       };
 		       };
 		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		/*
+		 * Unfortunately we need this since some versions
+		 * of U-Boot on Exynos don't set the CNTFRQ register,
+		 * so we need the value from DT.
+		 */
+		clock-frequency = <24000000>;
 	};
 };
 

arch/arm/boot/dts/exynos54xx.dtsi

···
 		usbdrdphy1 = &usbdrd_phy1;
 	};
 
+	arm_a7_pmu: arm-a7-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	arm_a15_pmu: arm-a15-pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <1 2>,
+			     <7 0>,
+			     <16 6>,
+			     <19 2>;
+		status = "disabled";
+	};
+
 	soc: soc {
-		arm_a7_pmu: arm-a7-pmu {
-			compatible = "arm,cortex-a7-pmu";
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		arm_a15_pmu: arm-a15-pmu {
-			compatible = "arm,cortex-a15-pmu";
-			interrupt-parent = <&combiner>;
-			interrupts = <1 2>,
-				     <7 0>,
-				     <16 6>,
-				     <19 2>;
-			status = "disabled";
-		};
-
 		sysram@2020000 {
 			compatible = "mmio-sram";
 			reg = <0x02020000 0x54000>;