MIPS: PMC-Sierra Yosemite: Remove support.

Nobody seems to be interested anymore and upstream also never had an
ethernet driver.

Signed-off-by: Ralf Baechle <[e-mail]>

arch/mips/Kconfig

···
 	  of integrated peripherals, interfaces and DSPs in addition to
 	  a variety of MIPS cores.
 
-config PMC_YOSEMITE
-	bool "PMC-Sierra Yosemite eval board"
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_COHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_CPU_RM7K
-	select IRQ_CPU_RM9K
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_RM9000
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_SMP
-	help
-	  Yosemite is an evaluation board for the RM9000x2 processor
-	  manufactured by PMC-Sierra.
-
 config POWERTV
 	bool "Cisco PowerTV"
 	select BOOT_ELF32
···
 config IRQ_CPU_RM7K
 	bool
 
-config IRQ_CPU_RM9K
-	bool
-
 config IRQ_MSP_SLP
 	bool
 
···
 
 config NO_EXCEPT_FILL
 	bool
-
-config MIPS_RM9122
-	bool
-	select SERIAL_RM9000
 
 config SOC_EMMA2RH
 	bool
···
 	select GENERIC_GPIO
 
 config SWAP_IO_SPACE
-	bool
-
-config SERIAL_RM9000
 	bool
 
 config SGI_HAS_INDYDOG
···
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
 
-config CPU_RM9000
-	bool "RM9000"
-	depends on SYS_HAS_CPU_RM9000
-	select CPU_HAS_PREFETCH
-	select CPU_SUPPORTS_32BIT_KERNEL
-	select CPU_SUPPORTS_64BIT_KERNEL
-	select CPU_SUPPORTS_HIGHMEM
-	select CPU_SUPPORTS_HUGEPAGES
-	select WEAK_ORDERING
-
 config CPU_SB1
 	bool "SB1"
 	depends on SYS_HAS_CPU_SB1
···
 	bool
 
 config SYS_HAS_CPU_RM7000
-	bool
-
-config SYS_HAS_CPU_RM9000
 	bool
 
 config SYS_HAS_CPU_SB1

arch/mips/Makefile

···
 			-Wa,--trap
 cflags-$(CONFIG_CPU_RM7000)	+= $(call cc-option,-march=rm7000,-march=r5000) \
 			-Wa,--trap
-cflags-$(CONFIG_CPU_RM9000)	+= $(call cc-option,-march=rm9000,-march=r5000) \
-			-Wa,--trap
 cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-march=sb1,-march=r5000) \
 			-Wa,--trap
 cflags-$(CONFIG_CPU_R8000)	+= -march=r8000 -Wa,--trap

arch/mips/configs/yosemite_defconfig

···
-CONFIG_PMC_YOSEMITE=y
-CONFIG_HIGHMEM=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_HZ_1000=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETWORK_SECMARK=y
-CONFIG_FW_LOADER=m
-CONFIG_CONNECTOR=m
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
-CONFIG_SGI_IOC4=m
-CONFIG_RAID_ATTRS=m
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=m
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_QLA3XXX=m
-CONFIG_CHELSIO_T3=m
-CONFIG_NETXEN_NIC=m
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_FUSE_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC16=m
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m

arch/mips/include/asm/hazards.h

···
 	)
 #define instruction_hazard() do { } while (0)
 
-#elif defined(CONFIG_CPU_RM9000)
-
-/*
- * RM9000 hazards.  When the JTLB is updated by tlbwi or tlbwr, a subsequent
- * use of the JTLB for instructions should not occur for 4 cpu cycles and use
- * for data translations should not occur for 3 cpu cycles.
- */
-
-ASMMACRO(mtc0_tlbw_hazard,
-	 _ssnop; _ssnop; _ssnop; _ssnop
-	)
-ASMMACRO(tlbw_use_hazard,
-	 _ssnop; _ssnop; _ssnop; _ssnop
-	)
-ASMMACRO(tlb_probe_hazard,
-	 _ssnop; _ssnop; _ssnop; _ssnop
-	)
-ASMMACRO(irq_enable_hazard,
-	)
-ASMMACRO(irq_disable_hazard,
-	)
-ASMMACRO(back_to_back_c0_hazard,
-	)
-#define instruction_hazard() do { } while (0)
-
 #elif defined(CONFIG_CPU_SB1)
 
 /*

arch/mips/include/asm/mach-ar7/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-ath79/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-au1x00/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-bcm47xx/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-bcm63xx/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-cavium-octeon/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-cobalt/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-dec/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-emma2rh/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-generic/irq.h

···
 #endif
 #endif
 
-#ifdef CONFIG_IRQ_CPU_RM9K
-#ifndef RM9K_CPU_IRQ_BASE
-#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12)
-#endif
-#endif
-
 #endif /* CONFIG_IRQ_CPU */
 
 #endif /* __ASM_MACH_GENERIC_IRQ_H */

arch/mips/include/asm/mach-ip22/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-ip27/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			1
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-ip28/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			1
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-ip32/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR   1
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-jazz/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-jz4740/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-lantiq/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR        0
 #define MIPS_CACHE_SYNC_WAR             0
 #define TX49XX_ICACHE_INDEX_INV_WAR     0
-#define RM9000_CDEX_SMP_WAR             0
 #define ICACHE_REFILLS_WORKAROUND_WAR   0
 #define R10000_LLSC_WAR                 0
 #define MIPS34K_MISSED_ITLB_WAR         0

arch/mips/include/asm/mach-lasat/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-loongson/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-loongson1/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-malta/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	1
 #define MIPS_CACHE_SYNC_WAR		1
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	1
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-netlogic/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-pnx833x/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-pnx8550/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-powertv/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	1
 #define MIPS_CACHE_SYNC_WAR		1
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	1
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-rc32434/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	1
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-rm/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-sead3/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	1
 #define MIPS_CACHE_SYNC_WAR		1
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	1
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-sibyte/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-tx39xx/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-tx49xx/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	1
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-vr41xx/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-wrppmc/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	1
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0

arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h

···
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 04, 07 Ralf Baechle ([e-mail])
- */
-#ifndef __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H
-
-/*
- * Momentum Jaguar ATX always has the RM9000 processor.
- */
-#define cpu_has_watch		1
-#define cpu_has_mips16		0
-#define cpu_has_divec		0
-#define cpu_has_vce		0
-#define cpu_has_cache_cdex_p	0
-#define cpu_has_cache_cdex_s	0
-#define cpu_has_prefetch	1
-#define cpu_has_mcheck		0
-#define cpu_has_ejtag		0
-
-#define cpu_has_llsc		1
-#define cpu_has_vtag_icache	0
-#define cpu_has_dc_aliases	0
-#define cpu_has_ic_fills_f_dc	0
-#define cpu_has_dsp		0
-#define cpu_has_dsp2		0
-#define cpu_has_mipsmt		0
-#define cpu_has_userlocal	0
-#define cpu_icache_snoops_remote_store	0
-
-#define cpu_has_nofpuex		0
-#define cpu_has_64bits		1
-
-#define cpu_has_inclusive_pcaches	0
-
-#define cpu_dcache_line_size()	32
-#define cpu_icache_line_size()	32
-#define cpu_scache_line_size()	32
-
-#define cpu_has_mips32r1	0
-#define cpu_has_mips32r2	0
-#define cpu_has_mips64r1	0
-#define cpu_has_mips64r2	0
-
-#endif /* __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H */

arch/mips/include/asm/mach-yosemite/war.h

···
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <[e-mail]>
- */
-#ifndef __ASM_MIPS_MACH_YOSEMITE_WAR_H
-#define __ASM_MIPS_MACH_YOSEMITE_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR	0
-#define R4600_V1_HIT_CACHEOP_WAR	0
-#define R4600_V2_HIT_CACHEOP_WAR	0
-#define R5432_CP0_INTERRUPT_WAR		0
-#define BCM1250_M3_WAR			0
-#define SIBYTE_1956_WAR			0
-#define MIPS4K_ICACHE_REFILL_WAR	0
-#define MIPS_CACHE_SYNC_WAR		0
-#define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		1
-#define ICACHE_REFILLS_WORKAROUND_WAR	1
-#define R10000_LLSC_WAR			0
-#define MIPS34K_MISSED_ITLB_WAR		0
-
-#endif /* __ASM_MIPS_MACH_YOSEMITE_WAR_H */

arch/mips/include/asm/mipsregs.h

···
 #define read_c0_framemask()	__read_32bit_c0_register($21, 0)
 #define write_c0_framemask(val)	__write_32bit_c0_register($21, 0, val)
 
-/* RM9000 PerfControl performance counter control register */
-#define read_c0_perfcontrol()	__read_32bit_c0_register($22, 0)
-#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val)
-
 #define read_c0_diag()		__read_32bit_c0_register($22, 0)
 #define write_c0_diag(val)	__write_32bit_c0_register($22, 0, val)
 
···
 #define write_c0_perfcntr3(val)	__write_32bit_c0_register($25, 7, val)
 #define read_c0_perfcntr3_64()	__read_64bit_c0_register($25, 7)
 #define write_c0_perfcntr3_64(val) __write_64bit_c0_register($25, 7, val)
-
-/* RM9000 PerfCount performance counter register */
-#define read_c0_perfcount()	__read_64bit_c0_register($25, 0)
-#define write_c0_perfcount(val)	__write_64bit_c0_register($25, 0, val)
 
 #define read_c0_ecc()		__read_32bit_c0_register($26, 0)
 #define write_c0_ecc(val)	__write_32bit_c0_register($26, 0, val)

arch/mips/include/asm/mmu_context.h

···
 #define ASID_INC	0x10
 #define ASID_MASK	0xff0
 
-#elif defined(CONFIG_CPU_RM9000)
-
-#define ASID_INC	0x1
-#define ASID_MASK	0xfff
-
-/* SMTC/34K debug hack - but maybe we'll keep it */
 #elif defined(CONFIG_MIPS_MT_SMTC)
 
 #define ASID_INC	0x1

arch/mips/include/asm/module.h

···
 #define MODULE_PROC_FAMILY "R10000 "
 #elif defined CONFIG_CPU_RM7000
 #define MODULE_PROC_FAMILY "RM7000 "
-#elif defined CONFIG_CPU_RM9000
-#define MODULE_PROC_FAMILY "RM9000 "
 #elif defined CONFIG_CPU_SB1
 #define MODULE_PROC_FAMILY "SB1 "
 #elif defined CONFIG_CPU_LOONGSON1

arch/mips/include/asm/pgtable-bits.h

···
 #define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT)
 #define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)
 
-#elif defined(CONFIG_CPU_RM9000)
-
-#define _CACHE_WT		    (0<<_CACHE_SHIFT)
-#define _CACHE_WTWA		    (1<<_CACHE_SHIFT)
-#define _CACHE_UC_B		    (2<<_CACHE_SHIFT)
-#define _CACHE_WB		    (3<<_CACHE_SHIFT)
-#define _CACHE_CWBEA		    (4<<_CACHE_SHIFT)
-#define _CACHE_CWB		    (5<<_CACHE_SHIFT)
-#define _CACHE_UCNB		    (6<<_CACHE_SHIFT)
-#define _CACHE_FPC		    (7<<_CACHE_SHIFT)
-
-#define _CACHE_UNCACHED		    _CACHE_UC_B
-#define _CACHE_CACHABLE_NONCOHERENT _CACHE_WB
-
 #else
 
 #define _CACHE_CACHABLE_NO_WA	    (0<<_CACHE_SHIFT)  /* R4600 only      */

arch/mips/include/asm/pmc-sierra/msp71xx/war.h

···
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \

arch/mips/include/asm/titan_dep.h

···
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani ([e-mail])
- *
- * Board specific definititions for the PMC-Sierra Yosemite
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __TITAN_DEP_H__
-#define __TITAN_DEP_H__
-
-#include <asm/addrspace.h>              /* for KSEG1ADDR() */
-#include <asm/byteorder.h>              /* for cpu_to_le32() */
-
-#define TITAN_READ(ofs)							\
-	(*(volatile u32 *)(ocd_base+(ofs)))
-#define TITAN_READ_16(ofs)						\
-	(*(volatile u16 *)(ocd_base+(ofs)))
-#define TITAN_READ_8(ofs)						\
-	(*(volatile u8 *)(ocd_base+(ofs)))
-
-#define TITAN_WRITE(ofs, data)						\
-	do { *(volatile u32 *)(ocd_base+(ofs)) = (data); } while (0)
-#define TITAN_WRITE_16(ofs, data)					\
-	do { *(volatile u16 *)(ocd_base+(ofs)) = (data); } while (0)
-#define TITAN_WRITE_8(ofs, data)					\
-	do { *(volatile u8 *)(ocd_base+(ofs)) = (data); } while (0)
-
-/*
- * PCI specific defines
- */
-#define	TITAN_PCI_0_CONFIG_ADDRESS	0x780
-#define	TITAN_PCI_0_CONFIG_DATA		0x784
-
-/*
- * HT specific defines
- */
-#define RM9000x2_HTLINK_REG		0xbb000644
-#define RM9000x2_BASE_ADDR		0xbb000000
-
-#define OCD_BASE			0xfb000000UL
-#define OCD_SIZE			0x3000UL
-
-extern unsigned long ocd_base;
-
-/*
- * OCD Registers
- */
-#define RM9000x2_OCD_LKB5		0x0128		/* Ethernet */
-#define RM9000x2_OCD_LKM5		0x012c
-
-#define RM9000x2_OCD_LKB7		0x0138		/* HT Region 0 */
-#define RM9000x2_OCD_LKM7		0x013c
-#define RM9000x2_OCD_LKB8		0x0140		/* HT Region 1 */
-#define RM9000x2_OCD_LKM8		0x0144
-
-#define RM9000x2_OCD_LKB9		0x0148		/* Local Bus */
-#define RM9000x2_OCD_LKM9		0x014c
-#define RM9000x2_OCD_LKB10		0x0150
-#define RM9000x2_OCD_LKM10		0x0154
-#define RM9000x2_OCD_LKB11		0x0158
-#define RM9000x2_OCD_LKM11		0x015c
-#define RM9000x2_OCD_LKB12		0x0160
-#define RM9000x2_OCD_LKM12		0x0164
-
-#define RM9000x2_OCD_LKB13		0x0168		/* Scratch RAM */
-#define RM9000x2_OCD_LKM13		0x016c
-
-#define RM9000x2_OCD_LPD0		0x0200		/* Local Bus */
-#define RM9000x2_OCD_LPD1		0x0210
-#define RM9000x2_OCD_LPD2		0x0220
-#define RM9000x2_OCD_LPD3		0x0230
-
-#define RM9000x2_OCD_HTDVID		0x0600	/* HT Device Header */
-#define RM9000x2_OCD_HTSC		0x0604
-#define RM9000x2_OCD_HTCCR		0x0608
-#define RM9000x2_OCD_HTBHL		0x060c
-#define RM9000x2_OCD_HTBAR0		0x0610
-#define RM9000x2_OCD_HTBAR1		0x0614
-#define RM9000x2_OCD_HTBAR2		0x0618
-#define RM9000x2_OCD_HTBAR3		0x061c
-#define RM9000x2_OCD_HTBAR4		0x0620
-#define RM9000x2_OCD_HTBAR5		0x0624
-#define RM9000x2_OCD_HTCBCPT		0x0628
-#define RM9000x2_OCD_HTSDVID		0x062c
-#define RM9000x2_OCD_HTXRA		0x0630
-#define RM9000x2_OCD_HTCAP1		0x0634
-#define RM9000x2_OCD_HTIL		0x063c
-
-#define RM9000x2_OCD_HTLCC		0x0640	/* HT Capability Block */
-#define RM9000x2_OCD_HTLINK		0x0644
-#define RM9000x2_OCD_HTFQREV		0x0648
-
-#define RM9000x2_OCD_HTERCTL		0x0668	/* HT Controller */
-#define RM9000x2_OCD_HTRXDB		0x066c
-#define RM9000x2_OCD_HTIMPED		0x0670
-#define RM9000x2_OCD_HTSWIMP		0x0674
-#define RM9000x2_OCD_HTCAL		0x0678
-
-#define RM9000x2_OCD_HTBAA30		0x0680
-#define RM9000x2_OCD_HTBAA54		0x0684
-#define RM9000x2_OCD_HTMASK0		0x0688
-#define RM9000x2_OCD_HTMASK1		0x068c
-#define RM9000x2_OCD_HTMASK2		0x0690
-#define RM9000x2_OCD_HTMASK3		0x0694
-#define RM9000x2_OCD_HTMASK4		0x0698
-#define RM9000x2_OCD_HTMASK5		0x069c
-
-#define RM9000x2_OCD_HTIFCTL		0x06a0
-#define RM9000x2_OCD_HTPLL		0x06a4
-
-#define RM9000x2_OCD_HTSRI		0x06b0
-#define RM9000x2_OCD_HTRXNUM		0x06b4
-#define RM9000x2_OCD_HTTXNUM		0x06b8
-
-#define RM9000x2_OCD_HTTXCNT		0x06c8
-
-#define RM9000x2_OCD_HTERROR		0x06d8
-#define RM9000x2_OCD_HTRCRCE		0x06dc
-#define RM9000x2_OCD_HTEOI		0x06e0
-
-#define RM9000x2_OCD_CRCR		0x06f0
-
-#define RM9000x2_OCD_HTCFGA		0x06f8
-#define RM9000x2_OCD_HTCFGD		0x06fc
-
-#define RM9000x2_OCD_INTMSG		0x0a00
-
-#define RM9000x2_OCD_INTPIN0		0x0a40
-#define RM9000x2_OCD_INTPIN1		0x0a44
-#define RM9000x2_OCD_INTPIN2		0x0a48
-#define RM9000x2_OCD_INTPIN3		0x0a4c
-#define RM9000x2_OCD_INTPIN4		0x0a50
-#define RM9000x2_OCD_INTPIN5		0x0a54
-#define RM9000x2_OCD_INTPIN6		0x0a58
-#define RM9000x2_OCD_INTPIN7		0x0a5c
-#define RM9000x2_OCD_SEM		0x0a60
-#define RM9000x2_OCD_SEMSET		0x0a64
-#define RM9000x2_OCD_SEMCLR		0x0a68
-
-#define RM9000x2_OCD_TKT		0x0a70
-#define RM9000x2_OCD_TKTINC		0x0a74
-
-#define RM9000x2_OCD_NMICONFIG		0x0ac0		/* Interrupts */
-#define RM9000x2_OCD_INTP0PRI		0x1a80
-#define RM9000x2_OCD_INTP1PRI		0x1a80
-#define RM9000x2_OCD_INTP0STATUS0	0x1b00
-#define RM9000x2_OCD_INTP0MASK0		0x1b04
-#define RM9000x2_OCD_INTP0SET0		0x1b08
-#define RM9000x2_OCD_INTP0CLEAR0	0x1b0c
-#define RM9000x2_OCD_INTP0STATUS1	0x1b10
-#define RM9000x2_OCD_INTP0MASK1		0x1b14
-#define RM9000x2_OCD_INTP0SET1		0x1b18
-#define RM9000x2_OCD_INTP0CLEAR1	0x1b1c
-#define RM9000x2_OCD_INTP0STATUS2	0x1b20
-#define RM9000x2_OCD_INTP0MASK2		0x1b24
-#define RM9000x2_OCD_INTP0SET2		0x1b28
-#define RM9000x2_OCD_INTP0CLEAR2	0x1b2c
-#define RM9000x2_OCD_INTP0STATUS3	0x1b30
-#define RM9000x2_OCD_INTP0MASK3		0x1b34
-#define RM9000x2_OCD_INTP0SET3		0x1b38
-#define RM9000x2_OCD_INTP0CLEAR3	0x1b3c
-#define RM9000x2_OCD_INTP0STATUS4	0x1b40
-#define RM9000x2_OCD_INTP0MASK4		0x1b44
-#define RM9000x2_OCD_INTP0SET4		0x1b48
-#define RM9000x2_OCD_INTP0CLEAR4	0x1b4c
-#define RM9000x2_OCD_INTP0STATUS5	0x1b50
-#define RM9000x2_OCD_INTP0MASK5		0x1b54
-#define RM9000x2_OCD_INTP0SET5		0x1b58
-#define RM9000x2_OCD_INTP0CLEAR5	0x1b5c
-#define RM9000x2_OCD_INTP0STATUS6	0x1b60
-#define RM9000x2_OCD_INTP0MASK6		0x1b64
-#define RM9000x2_OCD_INTP0SET6		0x1b68
-#define RM9000x2_OCD_INTP0CLEAR6	0x1b6c
-#define RM9000x2_OCD_INTP0STATUS7	0x1b70
-#define RM9000x2_OCD_INTP0MASK7		0x1b74
-#define RM9000x2_OCD_INTP0SET7		0x1b78
-#define RM9000x2_OCD_INTP0CLEAR7	0x1b7c
-#define RM9000x2_OCD_INTP1STATUS0	0x2b00
-#define RM9000x2_OCD_INTP1MASK0		0x2b04
-#define RM9000x2_OCD_INTP1SET0		0x2b08
-#define RM9000x2_OCD_INTP1CLEAR0	0x2b0c
-#define RM9000x2_OCD_INTP1STATUS1	0x2b10
-#define RM9000x2_OCD_INTP1MASK1		0x2b14
-#define RM9000x2_OCD_INTP1SET1		0x2b18
-#define RM9000x2_OCD_INTP1CLEAR1	0x2b1c
-#define RM9000x2_OCD_INTP1STATUS2	0x2b20
-#define RM9000x2_OCD_INTP1MASK2		0x2b24
-#define RM9000x2_OCD_INTP1SET2		0x2b28
-#define RM9000x2_OCD_INTP1CLEAR2	0x2b2c
-#define RM9000x2_OCD_INTP1STATUS3	0x2b30
-#define RM9000x2_OCD_INTP1MASK3		0x2b34
-#define RM9000x2_OCD_INTP1SET3		0x2b38
-#define RM9000x2_OCD_INTP1CLEAR3	0x2b3c
-#define RM9000x2_OCD_INTP1STATUS4	0x2b40
-#define RM9000x2_OCD_INTP1MASK4		0x2b44
-#define RM9000x2_OCD_INTP1SET4		0x2b48
-#define RM9000x2_OCD_INTP1CLEAR4	0x2b4c
-#define RM9000x2_OCD_INTP1STATUS5	0x2b50
-#define RM9000x2_OCD_INTP1MASK5		0x2b54
-#define RM9000x2_OCD_INTP1SET5		0x2b58
-#define RM9000x2_OCD_INTP1CLEAR5	0x2b5c
-#define RM9000x2_OCD_INTP1STATUS6	0x2b60
-#define RM9000x2_OCD_INTP1MASK6		0x2b64
-#define RM9000x2_OCD_INTP1SET6		0x2b68
-#define RM9000x2_OCD_INTP1CLEAR6	0x2b6c
-#define RM9000x2_OCD_INTP1STATUS7	0x2b70
-#define RM9000x2_OCD_INTP1MASK7		0x2b74
-#define RM9000x2_OCD_INTP1SET7		0x2b78
-#define RM9000x2_OCD_INTP1CLEAR7	0x2b7c
-
-#define OCD_READ(reg)		(*(volatile unsigned int *)(ocd_base + (reg)))
-#define OCD_WRITE(reg, val)					\
-	do { *(volatile unsigned int *)(ocd_base + (reg)) = (val); } while (0)
-
-/*
- * Hypertransport specific macros
- */
-#define RM9K_WRITE(ofs, data)   *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs) = data
-#define RM9K_WRITE_8(ofs, data) *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs) = data
-#define RM9K_WRITE_16(ofs, data) *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs) = data
-
-#define RM9K_READ(ofs, val)     *(val) = *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs)
-#define RM9K_READ_8(ofs, val)   *(val) = *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs)
-#define RM9K_READ_16(ofs, val)  *(val) = *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs)
-
-#endif

arch/mips/include/asm/war.h

···
 #endif
 
 /*
- * On the RM9000 there is a problem which makes the CreateDirtyExclusive
- * eache operation unusable on SMP systems.
- */
-#ifndef RM9000_CDEX_SMP_WAR
-#error Check setting of RM9000_CDEX_SMP_WAR for your platform
-#endif
-
-/*
  * The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra
  * opposes it being called that) where invalid instructions in the same
  * I-cache line worth of instructions being fetched may case spurious

arch/mips/kernel/Makefile

···
 obj-$(CONFIG_I8259)		+= i8259.o
 obj-$(CONFIG_IRQ_CPU)		+= irq_cpu.o
 obj-$(CONFIG_IRQ_CPU_RM7K)	+= irq-rm7000.o
-obj-$(CONFIG_IRQ_CPU_RM9K)	+= irq-rm9000.o
 obj-$(CONFIG_MIPS_MSC)		+= irq-msc01.o
 obj-$(CONFIG_IRQ_TXX9)		+= irq_txx9.o
 obj-$(CONFIG_IRQ_GT641XX)	+= irq-gt641xx.o

arch/mips/kernel/irq-rm9000.c

···
-/*
- * Copyright (C) 2003 Ralf Baechle
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Handler for RM9000 extended interrupts.  These are a non-standard
- * feature so we handle them separately from standard interrupts.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-
-static inline void unmask_rm9k_irq(struct irq_data *d)
-{
-	set_c0_intcontrol(0x1000 << (d->irq - RM9K_CPU_IRQ_BASE));
-}
-
-static inline void mask_rm9k_irq(struct irq_data *d)
-{
-	clear_c0_intcontrol(0x1000 << (d->irq - RM9K_CPU_IRQ_BASE));
-}
-
-static inline void rm9k_cpu_irq_enable(struct irq_data *d)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	unmask_rm9k_irq(d);
-	local_irq_restore(flags);
-}
-
-/*
- * Performance counter interrupts are global on all processors.
- */
-static void local_rm9k_perfcounter_irq_startup(void *args)
-{
-	rm9k_cpu_irq_enable(args);
-}
-
-static unsigned int rm9k_perfcounter_irq_startup(struct irq_data *d)
-{
-	on_each_cpu(local_rm9k_perfcounter_irq_startup, d, 1);
-
-	return 0;
-}
-
-static void local_rm9k_perfcounter_irq_shutdown(void *args)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	mask_rm9k_irq(args);
-	local_irq_restore(flags);
-}
-
-static void rm9k_perfcounter_irq_shutdown(struct irq_data *d)
-{
-	on_each_cpu(local_rm9k_perfcounter_irq_shutdown, d, 1);
-}
-
-static struct irq_chip rm9k_irq_controller = {
-	.name = "RM9000",
-	.irq_ack = mask_rm9k_irq,
-	.irq_mask = mask_rm9k_irq,
-	.irq_mask_ack = mask_rm9k_irq,
-	.irq_unmask = unmask_rm9k_irq,
-	.irq_eoi = unmask_rm9k_irq
-};
-
-static struct irq_chip rm9k_perfcounter_irq = {
-	.name = "RM9000",
-	.irq_startup = rm9k_perfcounter_irq_startup,
-	.irq_shutdown = rm9k_perfcounter_irq_shutdown,
-	.irq_ack = mask_rm9k_irq,
-	.irq_mask = mask_rm9k_irq,
-	.irq_mask_ack = mask_rm9k_irq,
-	.irq_unmask = unmask_rm9k_irq,
-};
-
-unsigned int rm9000_perfcount_irq;
-
-EXPORT_SYMBOL(rm9000_perfcount_irq);
-
-void __init rm9k_cpu_irq_init(void)
-{
-	int base = RM9K_CPU_IRQ_BASE;
-	int i;
-
-	clear_c0_intcontrol(0x0000f000);		/* Mask all */
-
-	for (i = base; i < base + 4; i++)
-		irq_set_chip_and_handler(i, &rm9k_irq_controller,
-					 handle_level_irq);
-
-	rm9000_perfcount_irq = base + 1;
-	irq_set_chip_and_handler(rm9000_perfcount_irq, &rm9k_perfcounter_irq,
-				 handle_percpu_irq);
-}

arch/mips/mm/c-r4k.c

···
 	case CPU_RM7000:
 		rm7k_erratum31();
 
-	case CPU_RM9000:
 		icache_size = 1 << (12 + ((config & CONF_IC) >> 9));
 		c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
 		c->icache.ways = 4;
···
 		c->dcache.ways = 4;
 		c->dcache.waybit = __ffs(dcache_size / c->dcache.ways);
 
-#if !defined(CONFIG_SMP) || !defined(RM9000_CDEX_SMP_WAR)
 		c->options |= MIPS_CPU_CACHE_CDEX_P;
-#endif
 		c->options |= MIPS_CPU_PREFETCH;
 		break;
 
···
                 return;
 
 	case CPU_RM7000:
-	case CPU_RM9000:
 #ifdef CONFIG_RM7000_CPU_SCACHE
 		rm7k_sc_init();
 #endif

arch/mips/mm/page.c

···
 			pref_bias_copy_load = 256;
 			break;
 
-		case CPU_RM9000:
-			/*
-			 * As a workaround for erratum G105 which make the
-			 * PrepareForStore hint unusable we fall back to
-			 * StoreRetained on the RM9000.  Once it is known which
-			 * versions of the RM9000 we'll be able to condition-
-			 * alize this.
-			 */
-
 		case CPU_R10000:
 		case CPU_R12000:
 		case CPU_R14000:

arch/mips/mm/tlbex.c

···
 		tlbw(p);
 		break;
 
-	case CPU_RM9000:
-		/*
-		 * When the JTLB is updated by tlbwi or tlbwr, a subsequent
-		 * use of the JTLB for instructions should not occur for 4
-		 * cpu cycles and use for data translations should not occur
-		 * for 3 cpu cycles.
-		 */
-		uasm_i_ssnop(p);
-		uasm_i_ssnop(p);
-		uasm_i_ssnop(p);
-		uasm_i_ssnop(p);
-		tlbw(p);
-		uasm_i_ssnop(p);
-		uasm_i_ssnop(p);
-		uasm_i_ssnop(p);
-		uasm_i_ssnop(p);
-		break;
-
 	case CPU_VR4111:
 	case CPU_VR4121:
 	case CPU_VR4122:

arch/mips/oprofile/Makefile

···
 oprofile-$(CONFIG_CPU_MIPS64)		+= op_model_mipsxx.o
 oprofile-$(CONFIG_CPU_R10000)		+= op_model_mipsxx.o
 oprofile-$(CONFIG_CPU_SB1)		+= op_model_mipsxx.o
-oprofile-$(CONFIG_CPU_RM9000)		+= op_model_rm9000.o
 oprofile-$(CONFIG_CPU_LOONGSON2)	+= op_model_loongson2.o

arch/mips/oprofile/common.c

···
 #include "op_impl.h"
 
 extern struct op_mips_model op_model_mipsxx_ops __weak;
-extern struct op_mips_model op_model_rm9000_ops __weak;
 extern struct op_mips_model op_model_loongson2_ops __weak;
 
 static struct op_mips_model *model;
···
 		lmodel = &op_model_mipsxx_ops;
 		break;
 
-	case CPU_RM9000:
-		lmodel = &op_model_rm9000_ops;
-		break;
 	case CPU_LOONGSON2:
 		lmodel = &op_model_loongson2_ops;
 		break;

arch/mips/oprofile/op_model_rm9000.c

···
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004 by Ralf Baechle
- */
-#include <linux/init.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-
-#include "op_impl.h"
-
-#define RM9K_COUNTER1_EVENT(event)	((event) << 0)
-#define RM9K_COUNTER1_SUPERVISOR	(1ULL    <<  7)
-#define RM9K_COUNTER1_KERNEL		(1ULL    <<  8)
-#define RM9K_COUNTER1_USER		(1ULL    <<  9)
-#define RM9K_COUNTER1_ENABLE		(1ULL    << 10)
-#define RM9K_COUNTER1_OVERFLOW		(1ULL    << 15)
-
-#define RM9K_COUNTER2_EVENT(event)	((event) << 16)
-#define RM9K_COUNTER2_SUPERVISOR	(1ULL    << 23)
-#define RM9K_COUNTER2_KERNEL		(1ULL    << 24)
-#define RM9K_COUNTER2_USER		(1ULL    << 25)
-#define RM9K_COUNTER2_ENABLE		(1ULL    << 26)
-#define RM9K_COUNTER2_OVERFLOW		(1ULL    << 31)
-
-extern unsigned int rm9000_perfcount_irq;
-
-static struct rm9k_register_config {
-	unsigned int control;
-	unsigned int reset_counter1;
-	unsigned int reset_counter2;
-} reg;
-
-/* Compute all of the registers in preparation for enabling profiling.  */
-
-static void rm9000_reg_setup(struct op_counter_config *ctr)
-{
-	unsigned int control = 0;
-
-	/* Compute the performance counter control word.  */
-	/* For now count kernel and user mode */
-	if (ctr[0].enabled)
-		control |= RM9K_COUNTER1_EVENT(ctr[0].event) |
-		           RM9K_COUNTER1_KERNEL |
-		           RM9K_COUNTER1_USER |
-		           RM9K_COUNTER1_ENABLE;
-	if (ctr[1].enabled)
-		control |= RM9K_COUNTER2_EVENT(ctr[1].event) |
-		           RM9K_COUNTER2_KERNEL |
-		           RM9K_COUNTER2_USER |
-		           RM9K_COUNTER2_ENABLE;
-	reg.control = control;
-
-	reg.reset_counter1 = 0x80000000 - ctr[0].count;
-	reg.reset_counter2 = 0x80000000 - ctr[1].count;
-}
-
-/* Program all of the registers in preparation for enabling profiling.  */
-
-static void rm9000_cpu_setup(void *args)
-{
-	uint64_t perfcount;
-
-	perfcount = ((uint64_t) reg.reset_counter2 << 32) | reg.reset_counter1;
-	write_c0_perfcount(perfcount);
-}
-
-static void rm9000_cpu_start(void *args)
-{
-	/* Start all counters on current CPU */
-	write_c0_perfcontrol(reg.control);
-}
-
-static void rm9000_cpu_stop(void *args)
-{
-	/* Stop all counters on current CPU */
-	write_c0_perfcontrol(0);
-}
-
-static irqreturn_t rm9000_perfcount_handler(int irq, void *dev_id)
-{
-	unsigned int control = read_c0_perfcontrol();
-	struct pt_regs *regs = get_irq_regs();
-	uint32_t counter1, counter2;
-	uint64_t counters;
-
-	/*
-	 * RM9000 combines two 32-bit performance counters into a single
-	 * 64-bit coprocessor zero register.  To avoid a race updating the
-	 * registers we need to stop the counters while we're messing with
-	 * them ...
-	 */
-	write_c0_perfcontrol(0);
-
-	counters = read_c0_perfcount();
-	counter1 = counters;
-	counter2 = counters >> 32;
-
-	if (control & RM9K_COUNTER1_OVERFLOW) {
-		oprofile_add_sample(regs, 0);
-		counter1 = reg.reset_counter1;
-	}
-	if (control & RM9K_COUNTER2_OVERFLOW) {
-		oprofile_add_sample(regs, 1);
-		counter2 = reg.reset_counter2;
-	}
-
-	counters = ((uint64_t)counter2 << 32) | counter1;
-	write_c0_perfcount(counters);
-	write_c0_perfcontrol(reg.control);
-
-	return IRQ_HANDLED;
-}
-
-static int __init rm9000_init(void)
-{
-	return request_irq(rm9000_perfcount_irq, rm9000_perfcount_handler,
-	                   0, "Perfcounter", NULL);
-}
-
-static void rm9000_exit(void)
-{
-	free_irq(rm9000_perfcount_irq, NULL);
-}
-
-struct op_mips_model op_model_rm9000_ops = {
-	.reg_setup	= rm9000_reg_setup,
-	.cpu_setup	= rm9000_cpu_setup,
-	.init		= rm9000_init,
-	.exit		= rm9000_exit,
-	.cpu_start	= rm9000_cpu_start,
-	.cpu_stop	= rm9000_cpu_stop,
-	.cpu_type	= "mips/rm9000",
-	.num_counters	= 2
-};

arch/mips/pci/Makefile

···
 obj-$(CONFIG_PMC_MSP7120_GW)	+= fixup-pmcmsp.o ops-pmcmsp.o
 obj-$(CONFIG_PMC_MSP7120_EVAL)	+= fixup-pmcmsp.o ops-pmcmsp.o
 obj-$(CONFIG_PMC_MSP7120_FPGA)	+= fixup-pmcmsp.o ops-pmcmsp.o
-obj-$(CONFIG_PMC_YOSEMITE)	+= fixup-yosemite.o ops-titan.o ops-titan-ht.o \
-				   pci-yosemite.o
 obj-$(CONFIG_SGI_IP27)		+= ops-bridge.o pci-ip27.o
 obj-$(CONFIG_SGI_IP32)		+= fixup-ip32.o ops-mace.o pci-ip32.o
 obj-$(CONFIG_SIBYTE_SB1250)	+= fixup-sb1250.o pci-sb1250.o

arch/mips/pci/fixup-yosemite.c

···
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani ([e-mail])
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (pin == 0)
-		return -1;
-
-	return 3;			/* Everything goes to one irq bit */
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}

arch/mips/pci/ops-titan-ht.c

···
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani ([e-mail])
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-#include <asm/titan_dep.h>
-
-static int titan_ht_config_read_dword(struct pci_bus *bus, unsigned int devfn,
-	int offset, u32 *val)
-{
-	volatile uint32_t address;
-	int busno;
-
-	busno = bus->number;
-
-	address = (busno << 16) | (devfn << 8) | (offset & 0xfc) | 0x80000000;
-	if (busno != 0)
-		address |= 1;
-
-	/*
-	 * RM9000 HT Errata: Issue back to back HT config
-	 * transcations. Issue a BIU sync before and
-	 * after the HT cycle
-	 */
-
-	*(volatile int32_t *) 0xfb0000f0 |= 0x2;
-
-	udelay(30);
-
-	*(volatile int32_t *) 0xfb0006f8 = address;
-	*(val) = *(volatile int32_t *) 0xfb0006fc;
-
-	udelay(30);
-
-	* (volatile int32_t *) 0xfb0000f0 |= 0x2;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int titan_ht_config_read(struct pci_bus *bus, unsigned int devfn,
-	int offset, int size, u32 *val)
-{
-	uint32_t dword;
-
-	titan_ht_config_read_dword(bus, devfn, offset, &dword);
-
-	dword >>= ((offset & 3) << 3);
-	dword &= (0xffffffffU >> ((4 - size) << 8));
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static inline int titan_ht_config_write_dword(struct pci_bus *bus,
-	unsigned int devfn, int offset, u32 val)
-{
-	volatile uint32_t address;
-	int busno;
-
-	busno = bus->number;
-
-	address = (busno << 16) | (devfn << 8) | (offset & 0xfc) | 0x80000000;
-	if (busno != 0)
-		address |= 1;
-
-	*(volatile int32_t *) 0xfb0000f0 |= 0x2;
-
-	udelay(30);
-
-	*(volatile int32_t *) 0xfb0006f8 = address;
-	*(volatile int32_t *) 0xfb0006fc = val;
-
-	udelay(30);
-
-	*(volatile int32_t *) 0xfb0000f0 |= 0x2;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int titan_ht_config_write(struct pci_bus *bus, unsigned int devfn,
-	int offset, int size, u32 val)
-{
-	uint32_t val1, val2, mask;
-
-	titan_ht_config_read_dword(bus, devfn, offset, &val2);
-
-	val1 = val << ((offset & 3) << 3);
-	mask = ~(0xffffffffU >> ((4 - size) << 8));
-	val2 &= ~(mask << ((offset & 3) << 8));
-
-	titan_ht_config_write_dword(bus, devfn, offset, val1 | val2);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops titan_ht_pci_ops = {
-	.read	= titan_ht_config_read,
-	.write	= titan_ht_config_write,
-};

arch/mips/pci/ops-titan.c

···
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani ([e-mail])
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-
-#include <asm/pci.h>
-#include <asm/io.h>
-#include <asm/rm9k-ocd.h>
-
-/*
- * PCI specific defines
- */
-#define	TITAN_PCI_0_CONFIG_ADDRESS	0x780
-#define	TITAN_PCI_0_CONFIG_DATA		0x784
-
-/*
- * Titan PCI Config Read Byte
- */
-static int titan_read_config(struct pci_bus *bus, unsigned int devfn, int reg,
-	int size, u32 * val)
-{
-	uint32_t address, tmp;
-	int dev, busno, func;
-
-	busno = bus->number;
-	dev = PCI_SLOT(devfn);
-	func = PCI_FUNC(devfn);
-
-	address = (busno << 16) | (dev << 11) | (func << 8) |
-	          (reg & 0xfc) | 0x80000000;
-
-
-	/* start the configuration cycle */
-	ocd_writel(address, TITAN_PCI_0_CONFIG_ADDRESS);
-	tmp = ocd_readl(TITAN_PCI_0_CONFIG_DATA) >> ((reg & 3) << 3);
-
-	switch (size) {
-	case 1:
-		tmp &= 0xff;
-	case 2:
-		tmp &= 0xffff;
-	}
-	*val = tmp;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int titan_write_config(struct pci_bus *bus, unsigned int devfn, int reg,
-	int size, u32 val)
-{
-	uint32_t address;
-	int dev, busno, func;
-
-	busno = bus->number;
-	dev = PCI_SLOT(devfn);
-	func = PCI_FUNC(devfn);
-
-	address = (busno << 16) | (dev << 11) | (func << 8) |
-		(reg & 0xfc) | 0x80000000;
-
-	/* start the configuration cycle */
-	ocd_writel(address, TITAN_PCI_0_CONFIG_ADDRESS);
-
-	/* write the data */
-	switch (size) {
-	case 1:
-		ocd_writeb(val, TITAN_PCI_0_CONFIG_DATA + (~reg & 0x3));
-		break;
-
-	case 2:
-		ocd_writew(val, TITAN_PCI_0_CONFIG_DATA + (~reg & 0x2));
-		break;
-
-	case 4:
-		ocd_writel(val, TITAN_PCI_0_CONFIG_DATA);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * Titan PCI structure
- */
-struct pci_ops titan_pci_ops = {
-	titan_read_config,
-	titan_write_config,
-};

arch/mips/pci/pci-yosemite.c

···
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004 by Ralf Baechle ([e-mail])
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/titan_dep.h>
-
-extern struct pci_ops titan_pci_ops;
-
-static struct resource py_mem_resource = {
-	.start	= 0xe0000000UL,
-	.end	= 0xe3ffffffUL,
-	.name	= "Titan PCI MEM",
-	.flags	= IORESOURCE_MEM
-};
-
-/*
- * PMON really reserves 16MB of I/O port space but that's stupid, nothing
- * needs that much since allocations are limited to 256 bytes per device
- * anyway.  So we just claim 64kB here.
- */
-#define TITAN_IO_SIZE	0x0000ffffUL
-#define TITAN_IO_BASE	0xe8000000UL
-
-static struct resource py_io_resource = {
-	.start	= 0x00001000UL,
-	.end	= TITAN_IO_SIZE - 1,
-	.name	= "Titan IO MEM",
-	.flags	= IORESOURCE_IO,
-};
-
-static struct pci_controller py_controller = {
-	.pci_ops	= &titan_pci_ops,
-	.mem_resource	= &py_mem_resource,
-	.mem_offset	= 0x00000000UL,
-	.io_resource	= &py_io_resource,
-	.io_offset	= 0x00000000UL
-};
-
-static char ioremap_failed[] __initdata = "Could not ioremap I/O port range";
-
-static int __init pmc_yosemite_setup(void)
-{
-	unsigned long io_v_base;
-
-	io_v_base = (unsigned long) ioremap(TITAN_IO_BASE, TITAN_IO_SIZE);
-	if (!io_v_base)
-		panic(ioremap_failed);
-
-	set_io_port_base(io_v_base);
-	py_controller.io_map_base = io_v_base;
-	TITAN_WRITE(RM9000x2_OCD_LKM7, TITAN_READ(RM9000x2_OCD_LKM7) | 1);
-
-	ioport_resource.end = TITAN_IO_SIZE - 1;
-
-	register_pci_controller(&py_controller);
-
-	return 0;
-}
-
-arch_initcall(pmc_yosemite_setup);

arch/mips/pmc-sierra/Kconfig

···
 
 endchoice
 
-config HYPERTRANSPORT
-	bool "Hypertransport Support for PMC-Sierra Yosemite"
-	depends on PMC_YOSEMITE
-
 config MSP_HAS_USB
 	boolean
 	depends on PMC_MSP

arch/mips/pmc-sierra/Platform

···
 cflags-$(CONFIG_PMC_MSP)	+= -I$(srctree)/arch/mips/include/asm/pmc-sierra/msp71xx \
 					-mno-branch-likely
 load-$(CONFIG_PMC_MSP)		+= 0xffffffff80100000
-
-#
-# PMC-Sierra Yosemite
-#
-platform-$(CONFIG_PMC_YOSEMITE)	+= pmc-sierra/yosemite/
-cflags-$(CONFIG_PMC_YOSEMITE)	+= -I$(srctree)/arch/mips/include/asm/mach-yosemite
-load-$(CONFIG_PMC_YOSEMITE)	+= 0xffffffff80100000

arch/mips/pmc-sierra/yosemite/Makefile

···
-#
-# Makefile for the PMC-Sierra Titan
-#
-
-obj-y    += irq.o prom.o py-console.o setup.o
-
-obj-$(CONFIG_SMP)		+= smp.o

arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c

···
-/*
- *  Copyright (C) 2003 PMC-Sierra Inc.
- *  Author: Manish Lachwani ([e-mail])
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Description:
- *
- * This code reads the ATMEL 24CXX EEPROM. The PMC-Sierra Yosemite board uses the ATMEL
- * 24C32/24C64 which uses two byte addressing as compared to 24C16. Note that this program
- * uses the serial port like /dev/ttyS0, to communicate with the EEPROM. Hence, you are
- * expected to have a connectivity from the EEPROM to the serial port. This program does
- * __not__ communicate using the I2C protocol
- */
-
-#include "atmel_read_eeprom.h"
-
-static void delay(int delay)
-{
-	while (delay--);
-}
-
-static void send_bit(unsigned char bit)
-{
-	scl_lo;
-	delay(TXX);
-	if (bit)
-		sda_hi;
-	else
-		sda_lo;
-
-	delay(TXX);
-	scl_hi;
-	delay(TXX);
-}
-
-static void send_ack(void)
-{
-	send_bit(0);
-}
-
-static void send_byte(unsigned char byte)
-{
-	int	i = 0;
-
-	for (i = 7; i >= 0; i--)
-		send_bit((byte >> i) & 0x01);
-}
-
-static void send_start(void)
-{
-	sda_hi;
-	delay(TXX);
-	scl_hi;
-	delay(TXX);
-	sda_lo;
-	delay(TXX);
-}
-
-static void send_stop(void)
-{
-	sda_lo;
-	delay(TXX);
-	scl_hi;
-	delay(TXX);
-	sda_hi;
-	delay(TXX);
-}
-
-static void do_idle(void)
-{
-	sda_hi;
-	scl_hi;
-	vcc_off;
-}
-
-static int recv_bit(void)
-{
-	int	status;
-
-	scl_lo;
-	delay(TXX);
-	sda_hi;
-	delay(TXX);
-	scl_hi;
-	delay(TXX);
-
-	return 1;
-}
-
-static unsigned char recv_byte(void) {
-        int i;
-        unsigned char byte=0;
-
-        for (i=7;i>=0;i--)
-                byte |= (recv_bit() << i);
-
-        return byte;
-}
-
-static int recv_ack(void)
-{
-	unsigned int	ack;
-
-	ack = (unsigned int)recv_bit();
-	scl_lo;
-
-	if (ack) {
-		do_idle();
-		printk(KERN_ERR "Error reading the Atmel 24C32/24C64 EEPROM\n");
-		return -1;
-	}
-
-	return ack;
-}
-
-/*
- * This function does the actual read of the EEPROM. It needs the buffer into which the
- * read data is copied, the size of the EEPROM being read and the buffer size
- */
-int read_eeprom(char *buffer, int eeprom_size, int size)
-{
-	int	i = 0, err;
-
-	send_start();
-	send_byte(W_HEADER);
-	recv_ack();
-
-	/* EEPROM with size of more than 2K need two byte addressing */
-	if (eeprom_size > 2048) {
-		send_byte(0x00);
-		recv_ack();
-	}
-
-	send_start();
-	send_byte(R_HEADER);
-	err = recv_ack();
-	if (err == -1)
-		return err;
-
-	for (i = 0; i < size; i++) {
-		*buffer++ = recv_byte();
-		send_ack();
-	}
-
-	/* Note : We should do some check if the buffer contains correct information */
-
-	send_stop();
-}

arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h

···
-/*
- *  arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
- *
- *  Copyright (C) 2003 PMC-Sierra Inc.
- *  Author: Manish Lachwani ([e-mail])
- *  Copyright (C) 2005 Ralf Baechle ([e-mail])
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Header file for atmel_read_eeprom.c
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <asm/pci.h>
-#include <asm/io.h>
-#include <linux/init.h>
-#include <asm/termios.h>
-#include <asm/ioctls.h>
-#include <linux/ioctl.h>
-#include <linux/fcntl.h>
-
-#define	DEFAULT_PORT 	"/dev/ttyS0"	/* Port to open */
-#define	TXX		0 		/* Dummy loop for spinning */
-
-#define	BLOCK_SEL	0x00
-#define	SLAVE_ADDR	0xa0
-#define	READ_BIT	0x01
-#define	WRITE_BIT	0x00
-#define	R_HEADER	SLAVE_ADDR + BLOCK_SEL + READ_BIT
-#define	W_HEADER	SLAVE_ADDR + BLOCK_SEL + WRITE_BIT
-
-/*
- * Clock, Voltages and Data
- */
-#define	vcc_off		(ioctl(fd, TIOCSBRK, 0))
-#define	vcc_on		(ioctl(fd, TIOCCBRK, 0))
-#define	sda_hi		(ioctl(fd, TIOCMBIS, &dtr))
-#define	sda_lo		(ioctl(fd, TIOCMBIC, &dtr))
-#define	scl_lo		(ioctl(fd, TIOCMBIC, &rts))
-#define	scl_hi		(ioctl(fd, TIOCMBIS, &rts))
-
-const char rts = TIOCM_RTS;
-const char dtr = TIOCM_DTR;
-int fd;

arch/mips/pmc-sierra/yosemite/ht-irq.c

···
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani ([e-mail])
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/pci.h>
-
-/*
- * HT Bus fixup for the Titan
- * XXX IRQ values need to change based on the board layout
- */
-void __init titan_ht_pcibios_fixup_bus(struct pci_bus *bus)
-{
-	/*
-	 * PLX and SPKT related changes go here
-	 */
-}

arch/mips/pmc-sierra/yosemite/ht.c

···
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani ([e-mail])
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <asm/pci.h>
-#include <asm/io.h>
-
-#include <linux/init.h>
-#include <asm/titan_dep.h>
-
-#ifdef CONFIG_HYPERTRANSPORT
-
-
-/*
- * This function check if the Hypertransport Link Initialization completed. If
- * it did, then proceed further with scanning bus #2
- */
-static __inline__ int check_titan_htlink(void)
-{
-        u32 val;
-
-        val = *(volatile uint32_t *)(RM9000x2_HTLINK_REG);
-        if (val & 0x00000020)
-                /* HT Link Initialization completed */
-                return 1;
-        else
-                return 0;
-}
-
-static int titan_ht_config_read_dword(struct pci_dev *device,
-                                             int offset, u32* val)
-{
-        int dev, bus, func;
-        uint32_t address_reg, data_reg;
-        uint32_t address;
-
-        bus = device->bus->number;
-        dev = PCI_SLOT(device->devfn);
-        func = PCI_FUNC(device->devfn);
-
-	/* XXX Need to change the Bus # */
-        if (bus > 2)
-                address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) |
-                                                        0x80000000 | 0x1;
-        else
-                address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000;
-
-        address_reg = RM9000x2_OCD_HTCFGA;
-        data_reg =  RM9000x2_OCD_HTCFGD;
-
-        RM9K_WRITE(address_reg, address);
-        RM9K_READ(data_reg, val);
-
-        return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int titan_ht_config_read_word(struct pci_dev *device,
-                                             int offset, u16* val)
-{
-        int dev, bus, func;
-        uint32_t address_reg, data_reg;
-        uint32_t address;
-
-        bus = device->bus->number;
-        dev = PCI_SLOT(device->devfn);
-        func = PCI_FUNC(device->devfn);
-
-	/* XXX Need to change the Bus # */
-        if (bus > 2)
-                address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) |
-                                                0x80000000 | 0x1;
-        else
-                address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000;
-
-        address_reg = RM9000x2_OCD_HTCFGA;
-        data_reg =  RM9000x2_OCD_HTCFGD;
-
-        if ((offset & 0x3) == 0)
-                offset = 0x2;
-        else
-                offset = 0x0;
-
-        RM9K_WRITE(address_reg, address);
-        RM9K_READ_16(data_reg + offset, val);
-
-        return PCIBIOS_SUCCESSFUL;
-}
-
-
-u32 longswap(unsigned long l)
-{
-        unsigned char b1, b2, b3, b4;
-
-        b1 = l&255;
-        b2 = (l>>8)&255;
-        b3 = (l>>16)&255;
-        b4 = (l>>24)&255;
-
-        return ((b1<<24) + (b2<<16) + (b3<<8) + b4);
-}
-
-
-static int titan_ht_config_read_byte(struct pci_dev *device,
-                                             int offset, u8* val)
-{
-        int dev, bus, func;
-        uint32_t address_reg, data_reg;
-        uint32_t address;
-        int offset1;
-
-        bus = device->bus->number;
-        dev = PCI_SLOT(device->devfn);
-        func = PCI_FUNC(device->devfn);
-
-	/* XXX Need to change the Bus # */
-        if (bus > 2)
-                address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) |
-                                                        0x80000000 | 0x1;
-        else
-                address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000;
-
-        address_reg = RM9000x2_OCD_HTCFGA;
-        data_reg =  RM9000x2_OCD_HTCFGD;
-
-        RM9K_WRITE(address_reg, address);
-
-        if ((offset & 0x3) == 0) {
-                offset1 = 0x3;
-        }
-        if ((offset & 0x3) == 1) {
-                offset1 = 0x2;
-        }
-        if ((offset & 0x3) == 2) {
-                offset1 = 0x1;
-        }
-        if ((offset & 0x3) == 3) {
-                offset1 = 0x0;
-        }
-        RM9K_READ_8(data_reg + offset1, val);
-
-        return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int titan_ht_config_write_dword(struct pci_dev *device,
-                                             int offset, u8 val)
-{
-        int dev, bus, func;
-        uint32_t address_reg, data_reg;
-        uint32_t address;
-
-        bus = device->bus->number;
-        dev = PCI_SLOT(device->devfn);
-        func = PCI_FUNC(device->devfn);
-
-	/* XXX Need to change the Bus # */
-        if (bus > 2)
-                address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) |
-                                                        0x80000000 | 0x1;
-        else
-              address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000;
-
-        address_reg = RM9000x2_OCD_HTCFGA;
-        data_reg =  RM9000x2_OCD_HTCFGD;
-
-        RM9K_WRITE(address_reg, address);
-        RM9K_WRITE(data_reg, val);
-
-        return PCIBIOS_SUCCESSFUL;
-}
-
-static int titan_ht_config_write_word(struct pci_dev *device,
-                                             int offset, u8 val)
-{
-        int dev, bus, func;
-        uint32_t address_reg, data_reg;
-        uint32_t address;
-
-        bus = device->bus->number;
-        dev = PCI_SLOT(device->devfn);
-        func = PCI_FUNC(device->devfn);
-
-	/* XXX Need to change the Bus # */
-        if (bus > 2)
-                address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) |
-                                0x80000000 | 0x1;
-        else
-                address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000;
-
-        address_reg = RM9000x2_OCD_HTCFGA;
-        data_reg =  RM9000x2_OCD_HTCFGD;
-
-        if ((offset & 0x3) == 0)
-                offset = 0x2;
-        else
-                offset = 0x0;
-
-        RM9K_WRITE(address_reg, address);
-        RM9K_WRITE_16(data_reg + offset, val);
-
-        return PCIBIOS_SUCCESSFUL;
-}
-
-static int titan_ht_config_write_byte(struct pci_dev *device,
-                                             int offset, u8 val)
-{
-        int dev, bus, func;
-        uint32_t address_reg, data_reg;
-        uint32_t address;
-        int offset1;
-
-        bus = device->bus->number;
-        dev = PCI_SLOT(device->devfn);
-        func = PCI_FUNC(device->devfn);
-
-	/* XXX Need to change the Bus # */
-        if (bus > 2)
-                address = (bus << 16) | (dev << 11) | (func << 8) | (offset & 0xfc) |
-                                0x80000000 | 0x1;
-        else
-                address = (dev << 11) | (func << 8) | (offset & 0xfc) | 0x80000000;
-
-        address_reg = RM9000x2_OCD_HTCFGA;
-        data_reg =  RM9000x2_OCD_HTCFGD;
-
-        RM9K_WRITE(address_reg, address);
-
-        if ((offset & 0x3) == 0) {
-             offset1 = 0x3;
-        }
-        if ((offset & 0x3) == 1) {
-             offset1 = 0x2;
-        }
-        if ((offset & 0x3) == 2) {
-             offset1 = 0x1;
-        }
-        if ((offset & 0x3) == 3) {
-            offset1 = 0x0;
-        }
-
-        RM9K_WRITE_8(data_reg + offset1, val);
-        return PCIBIOS_SUCCESSFUL;
-}
-
-
-static void titan_pcibios_set_master(struct pci_dev *dev)
-{
-        u16 cmd;
-        int bus = dev->bus->number;
-
-	if (check_titan_htlink())
-            titan_ht_config_read_word(dev, PCI_COMMAND, &cmd);
-
-	cmd |= PCI_COMMAND_MASTER;
-
-	if (check_titan_htlink())
-            titan_ht_config_write_word(dev, PCI_COMMAND, cmd);
-}
-
-
-int pcibios_enable_resources(struct pci_dev *dev)
-{
-        u16 cmd, old_cmd;
-        u8 tmp1;
-        int idx;
-        struct resource *r;
-        int bus = dev->bus->number;
-
-	if (check_titan_htlink())
-            titan_ht_config_read_word(dev, PCI_COMMAND, &cmd);
-
-	old_cmd = cmd;
-        for (idx = 0; idx < 6; idx++) {
-                r = &dev->resource[idx];
-                if (!r->start && r->end) {
-                        printk(KERN_ERR
-                               "PCI: Device %s not available because of "
-                               "resource collisions\n", pci_name(dev));
-                        return -EINVAL;
-                }
-                if (r->flags & IORESOURCE_IO)
-                        cmd |= PCI_COMMAND_IO;
-                if (r->flags & IORESOURCE_MEM)
-                        cmd |= PCI_COMMAND_MEMORY;
-        }
-        if (cmd != old_cmd) {
-		if (check_titan_htlink())
-                   titan_ht_config_write_word(dev, PCI_COMMAND, cmd);
-	}
-
-	if (check_titan_htlink())
-		titan_ht_config_read_byte(dev, PCI_CACHE_LINE_SIZE, &tmp1);
-
-	if (tmp1 != 8) {
-                printk(KERN_WARNING "PCI setting cache line size to 8 from "
-                       "%d\n", tmp1);
-	}
-
-	if (check_titan_htlink())
-		titan_ht_config_write_byte(dev, PCI_CACHE_LINE_SIZE, 8);
-
-	if (check_titan_htlink())
-		titan_ht_config_read_byte(dev, PCI_LATENCY_TIMER, &tmp1);
-
-	if (tmp1 < 32 || tmp1 == 0xff) {
-                printk(KERN_WARNING "PCI setting latency timer to 32 from %d\n",
-                       tmp1);
-	}
-
-	if (check_titan_htlink())
-		titan_ht_config_write_byte(dev, PCI_LATENCY_TIMER, 32);
-
-	return 0;
-}
-
-
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-        return pcibios_enable_resources(dev);
-}
-
-resource_size_t pcibios_align_resource(void *data, const struct resource *res,
-				resource_size_t size, resource_size_t align)
-{
-        struct pci_dev *dev = data;
-	resource_size_t start = res->start;
-
-        if (res->flags & IORESOURCE_IO) {
-                /* We need to avoid collisions with `mirrored' VGA ports
-                   and other strange ISA hardware, so we always want the
-                   addresses kilobyte aligned.  */
-                if (size > 0x100) {
-                        printk(KERN_ERR "PCI: I/O Region %s/%d too large"
-                               " (%ld bytes)\n", pci_name(dev),
-                                dev->resource - res, size);
-                }
-
-                start = (start + 1024 - 1) & ~(1024 - 1);
-        }
-
-	return start;
-}
-
-struct pci_ops titan_pci_ops = {
-        titan_ht_config_read_byte,
-        titan_ht_config_read_word,
-        titan_ht_config_read_dword,
-        titan_ht_config_write_byte,
-        titan_ht_config_write_word,
-        titan_ht_config_write_dword
-};
-
-void __init pcibios_fixup_bus(struct pci_bus *c)
-{
-        titan_ht_pcibios_fixup_bus(c);
-}
-
-void __init pcibios_init(void)
-{
-
-        /* Reset PCI I/O and PCI MEM values */
-	/* XXX Need to add the proper values here */
-        ioport_resource.start = 0xe0000000;
-        ioport_resource.end   = 0xe0000000 + 0x20000000 - 1;
-        iomem_resource.start  = 0xc0000000;
-        iomem_resource.end    = 0xc0000000 + 0x20000000 - 1;
-
-	/* XXX Need to add bus values */
-        pci_scan_bus(2, &titan_pci_ops, NULL);
-        pci_scan_bus(3, &titan_pci_ops, NULL);
-}
-
-unsigned __init int pcibios_assign_all_busses(void)
-{
-        /* We want to use the PCI bus detection done by PMON */
-        return 0;
-}
-
-#endif /* CONFIG_HYPERTRANSPORT */

arch/mips/pmc-sierra/yosemite/irq.c

···
-/*
- * Copyright (C) 2003 PMC-Sierra Inc.
- * Author: Manish Lachwani ([e-mail])
- *
- * Copyright (C) 2006 Ralf Baechle ([e-mail])
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Second level Interrupt handlers for the PMC-Sierra Titan/Yosemite board
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/timex.h>
-#include <linux/random.h>
-#include <linux/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/titan_dep.h>
-
-/* Hypertransport specific */
-#define IRQ_ACK_BITS            0x00000000	/* Ack bits */
-
-#define HYPERTRANSPORT_INTA     0x78		/* INTA# */
-#define HYPERTRANSPORT_INTB     0x79		/* INTB# */
-#define HYPERTRANSPORT_INTC     0x7a		/* INTC# */
-#define HYPERTRANSPORT_INTD     0x7b		/* INTD# */
-
-extern void titan_mailbox_irq(void);
-
-#ifdef CONFIG_HYPERTRANSPORT
-/*
- * Handle hypertransport & SMP interrupts. The interrupt lines are scarce.
- * For interprocessor interrupts, the best thing to do is to use the INTMSG
- * register. We use the same external interrupt line, i.e. INTB3 and monitor
- * another status bit
- */
-static void ll_ht_smp_irq_handler(int irq)
-{
-	u32 status = OCD_READ(RM9000x2_OCD_INTP0STATUS4);
-
-	/* Ack all the bits that correspond to the interrupt sources */
-	if (status != 0)
-		OCD_WRITE(RM9000x2_OCD_INTP0STATUS4, IRQ_ACK_BITS);
-
-	status = OCD_READ(RM9000x2_OCD_INTP1STATUS4);
-	if (status != 0)
-		OCD_WRITE(RM9000x2_OCD_INTP1STATUS4, IRQ_ACK_BITS);
-
-#ifdef CONFIG_HT_LEVEL_TRIGGER
-	/*
-	 * Level Trigger Mode only. Send the HT EOI message back to the source.
-	 */
-	switch (status) {
-	case 0x1000000:
-		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTA);
-		break;
-	case 0x2000000:
-		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTB);
-		break;
-	case 0x4000000:
-		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTC);
-		break;
-	case 0x8000000:
-		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTD);
-		break;
-	case 0x0000001:
-		/* PLX */
-		OCD_WRITE(RM9000x2_OCD_HTEOI, 0x20);
-		OCD_WRITE(IRQ_CLEAR_REG, IRQ_ACK_BITS);
-		break;
-	case 0xf000000:
-		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTA);
-		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTB);
-		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTC);
-		OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTD);
-		break;
-	}
-#endif /* CONFIG_HT_LEVEL_TRIGGER */
-
-	do_IRQ(irq);
-}
-#endif
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int cause = read_c0_cause();
-	unsigned int status = read_c0_status();
-	unsigned int pending = cause & status;
-
-	if (pending & STATUSF_IP7) {
-		do_IRQ(7);
-	} else if (pending & STATUSF_IP2) {
-#ifdef CONFIG_HYPERTRANSPORT
-		ll_ht_smp_irq_handler(2);
-#else
-		do_IRQ(2);
-#endif
-	} else if (pending & STATUSF_IP3) {
-		do_IRQ(3);
-	} else if (pending & STATUSF_IP4) {
-		do_IRQ(4);
-	} else if (pending & STATUSF_IP5) {
-#ifdef CONFIG_SMP
-		titan_mailbox_irq();
-#else
-		do_IRQ(5);
-#endif
-	} else if (pending & STATUSF_IP6) {
-		do_IRQ(4);
-	}
-}
-
-/*
- * Initialize the next level interrupt handler
- */
-void __init arch_init_irq(void)
-{
-	clear_c0_status(ST0_IM);
-
-	mips_cpu_irq_init();
-	rm7k_cpu_irq_init();
-	rm9k_cpu_irq_init();
-}

arch/mips/pmc-sierra/yosemite/prom.c

···
-/*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Copyright (C) 2003, 2004 PMC-Sierra Inc.
- * Author: Manish Lachwani ([e-mail])
- * Copyright (C) 2004 Ralf Baechle
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/smp.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/smp-ops.h>
-#include <asm/bootinfo.h>
-#include <asm/pmon.h>
-
-#ifdef CONFIG_SMP
-extern void prom_grab_secondary(void);
-#else
-#define prom_grab_secondary() do { } while (0)
-#endif
-
-#include "setup.h"
-
-struct callvectors *debug_vectors;
-
-extern unsigned long yosemite_base;
-extern unsigned long cpu_clock_freq;
-
-const char *get_system_type(void)
-{
-	return "PMC-Sierra Yosemite";
-}
-
-static void prom_cpu0_exit(void *arg)
-{
-	void *nvram = (void *) YOSEMITE_RTC_BASE;
-
-	/* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
-	writeb(0x84, nvram + 0xff7);
-
-	/* wait for the watchdog to go off */
-	mdelay(100 + (1000 / 16));
-
-	/* if the watchdog fails for some reason, let people know */
-	printk(KERN_NOTICE "Watchdog reset failed\n");
-}
-
-/*
- * Reset the NVRAM over the local bus
- */
-static void prom_exit(void)
-{
-#ifdef CONFIG_SMP
-	if (smp_processor_id())
-		/* CPU 1 */
-		smp_call_function(prom_cpu0_exit, NULL, 1);
-#endif
-	prom_cpu0_exit(NULL);
-}
-
-/*
- * Halt the system
- */
-static void prom_halt(void)
-{
-	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-	while (1)
-		__asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0");
-}
-
-extern struct plat_smp_ops yos_smp_ops;
-
-/*
- * Init routine which accepts the variables from PMON
- */
-void __init prom_init(void)
-{
-	int argc = fw_arg0;
-	char **arg = (char **) fw_arg1;
-	char **env = (char **) fw_arg2;
-	struct callvectors *cv = (struct callvectors *) fw_arg3;
-	int i = 0;
-
-	/* Callbacks for halt, restart */
-	_machine_restart = (void (*)(char *)) prom_exit;
-	_machine_halt = prom_halt;
-	pm_power_off = prom_halt;
-
-	debug_vectors = cv;
-	arcs_cmdline[0] = '\0';
-
-	/* Get the boot parameters */
-	for (i = 1; i < argc; i++) {
-		if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >=
-		    sizeof(arcs_cmdline))
-			break;
-
-		strcat(arcs_cmdline, arg[i]);
-		strcat(arcs_cmdline, " ");
-	}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	if ((strstr(arcs_cmdline, "console=ttyS")) == NULL)
-		strcat(arcs_cmdline, "console=ttyS0,115200");
-#endif
-
-	while (*env) {
-		if (strncmp("ocd_base", *env, strlen("ocd_base")) == 0)
-			yosemite_base =
-			    simple_strtol(*env + strlen("ocd_base="), NULL,
-					  16);
-
-		if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0)
-			cpu_clock_freq =
-			    simple_strtol(*env + strlen("cpuclock="), NULL,
-					  10);
-
-		env++;
-	}
-
-	prom_grab_secondary();
-
-	register_smp_ops(&yos_smp_ops);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
-{
-}

arch/mips/pmc-sierra/yosemite/py-console.c

···
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001, 2002, 2004 Ralf Baechle
- */
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/termios.h>
-#include <linux/sched.h>
-#include <linux/tty.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-
-/* SUPERIO uart register map */
-struct yo_uartregs {
-	union {
-		volatile u8	rbr;	/* read only, DLAB == 0 */
-		volatile u8	thr;	/* write only, DLAB == 0 */
-		volatile u8	dll;	/* DLAB == 1 */
-	} u1;
-	union {
-		volatile u8	ier;	/* DLAB == 0 */
-		volatile u8	dlm;	/* DLAB == 1 */
-	} u2;
-	union {
-		volatile u8	iir;	/* read only */
-		volatile u8	fcr;	/* write only */
-	} u3;
-	volatile u8	iu_lcr;
-	volatile u8	iu_mcr;
-	volatile u8	iu_lsr;
-	volatile u8	iu_msr;
-	volatile u8	iu_scr;
-} yo_uregs_t;
-
-#define iu_rbr u1.rbr
-#define iu_thr u1.thr
-#define iu_dll u1.dll
-#define iu_ier u2.ier
-#define iu_dlm u2.dlm
-#define iu_iir u3.iir
-#define iu_fcr u3.fcr
-
-#define ssnop()		__asm__ __volatile__("sll	$0, $0, 1\n");
-#define ssnop_4()	do { ssnop(); ssnop(); ssnop(); ssnop(); } while (0)
-
-#define IO_BASE_64	0x9000000000000000ULL
-
-static unsigned char readb_outer_space(unsigned long long phys)
-{
-	unsigned long long vaddr = IO_BASE_64 | phys;
-	unsigned char res;
-	unsigned int sr;
-
-	sr = read_c0_status();
-	write_c0_status((sr | ST0_KX) & ~ ST0_IE);
-	ssnop_4();
-
-	__asm__ __volatile__ (
-	"	.set	mips3		\n"
-	"	ld	%0, %1		\n"
-	"	lbu	%0, (%0)	\n"
-	"	.set	mips0		\n"
-	: "=r" (res)
-	: "m" (vaddr));
-
-	write_c0_status(sr);
-	ssnop_4();
-
-	return res;
-}
-
-static void writeb_outer_space(unsigned long long phys, unsigned char c)
-{
-	unsigned long long vaddr = IO_BASE_64 | phys;
-	unsigned long tmp;
-	unsigned int sr;
-
-	sr = read_c0_status();
-	write_c0_status((sr | ST0_KX) & ~ ST0_IE);
-	ssnop_4();
-
-	__asm__ __volatile__ (
-	"	.set	mips3		\n"
-	"	ld	%0, %1		\n"
-	"	sb	%2, (%0)	\n"
-	"	.set	mips0		\n"
-	: "=&r" (tmp)
-	: "m" (vaddr), "r" (c));
-
-	write_c0_status(sr);
-	ssnop_4();
-}
-
-void prom_putchar(char c)
-{
-	unsigned long lsr = 0xfd000008ULL + offsetof(struct yo_uartregs, iu_lsr);
-	unsigned long thr = 0xfd000008ULL + offsetof(struct yo_uartregs, iu_thr);
-
-	while ((readb_outer_space(lsr) & 0x20) == 0);
-	writeb_outer_space(thr, c);
-}

arch/mips/pmc-sierra/yosemite/setup.c

···
-/*
- *  Copyright (C) 2003 PMC-Sierra Inc.
- *  Author: Manish Lachwani ([e-mail])
- *
- * Copyright (C) 2004 by Ralf Baechle ([e-mail])
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/bcd.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/swap.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/termios.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/time.h>
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/serial.h>
-#include <asm/titan_dep.h>
-#include <asm/m48t37.h>
-
-#include "setup.h"
-
-unsigned char titan_ge_mac_addr_base[6] = {
-	// 0x00, 0x03, 0xcc, 0x1d, 0x22, 0x00
-	0x00, 0xe0, 0x04, 0x00, 0x00, 0x21
-};
-
-unsigned long cpu_clock_freq;
-unsigned long yosemite_base;
-
-static struct m48t37_rtc *m48t37_base;
-
-void __init bus_error_init(void)
-{
-	/* Do nothing */
-}
-
-
-void read_persistent_clock(struct timespec *ts)
-{
-	unsigned int year, month, day, hour, min, sec;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	/* Stop the update to the time */
-	m48t37_base->control = 0x40;
-
-	year = bcd2bin(m48t37_base->year);
-	year += bcd2bin(m48t37_base->century) * 100;
-
-	month = bcd2bin(m48t37_base->month);
-	day = bcd2bin(m48t37_base->date);
-	hour = bcd2bin(m48t37_base->hour);
-	min = bcd2bin(m48t37_base->min);
-	sec = bcd2bin(m48t37_base->sec);
-
-	/* Start the update to the time again */
-	m48t37_base->control = 0x00;
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	ts->tv_sec = mktime(year, month, day, hour, min, sec);
-	ts->tv_nsec = 0;
-}
-
-int rtc_mips_set_time(unsigned long tim)
-{
-	struct rtc_time tm;
-	unsigned long flags;
-
-	/*
-	 * Convert to a more useful format -- note months count from 0
-	 * and years from 1900
-	 */
-	rtc_time_to_tm(tim, &tm);
-	tm.tm_year += 1900;
-	tm.tm_mon += 1;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	/* enable writing */
-	m48t37_base->control = 0x80;
-
-	/* year */
-	m48t37_base->year = bin2bcd(tm.tm_year % 100);
-	m48t37_base->century = bin2bcd(tm.tm_year / 100);
-
-	/* month */
-	m48t37_base->month = bin2bcd(tm.tm_mon);
-
-	/* day */
-	m48t37_base->date = bin2bcd(tm.tm_mday);
-
-	/* hour/min/sec */
-	m48t37_base->hour = bin2bcd(tm.tm_hour);
-	m48t37_base->min = bin2bcd(tm.tm_min);
-	m48t37_base->sec = bin2bcd(tm.tm_sec);
-
-	/* day of week -- not really used, but let's keep it up-to-date */
-	m48t37_base->day = bin2bcd(tm.tm_wday + 1);
-
-	/* disable writing */
-	m48t37_base->control = 0x00;
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return 0;
-}
-
-void __init plat_time_init(void)
-{
-	mips_hpt_frequency = cpu_clock_freq / 2;
-mips_hpt_frequency = 33000000 * 3 * 5;
-}
-
-unsigned long ocd_base;
-
-EXPORT_SYMBOL(ocd_base);
-
-/*
- * Common setup before any secondaries are started
- */
-
-#define TITAN_UART_CLK		3686400
-#define TITAN_SERIAL_BASE_BAUD	(TITAN_UART_CLK / 16)
-#define TITAN_SERIAL_IRQ	4
-#define TITAN_SERIAL_BASE	0xfd000008UL
-
-static void __init py_map_ocd(void)
-{
-	ocd_base = (unsigned long) ioremap(OCD_BASE, OCD_SIZE);
-	if (!ocd_base)
-		panic("Mapping OCD failed - game over.  Your score is 0.");
-
-	/* Kludge for PMON bug ... */
-	OCD_WRITE(0x0710, 0x0ffff029);
-}
-
-static void __init py_uart_setup(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct uart_port up;
-
-	/*
-	 * Register to interrupt zero because we share the interrupt with
-	 * the serial driver which we don't properly support yet.
-	 */
-	memset(&up, 0, sizeof(up));
-	up.membase      = (unsigned char *) ioremap(TITAN_SERIAL_BASE, 8);
-	up.irq          = TITAN_SERIAL_IRQ;
-	up.uartclk      = TITAN_UART_CLK;
-	up.regshift     = 0;
-	up.iotype       = UPIO_MEM;
-	up.flags        = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	up.line         = 0;
-
-	if (early_serial_setup(&up))
-		printk(KERN_ERR "Early serial init of port 0 failed\n");
-#endif /* CONFIG_SERIAL_8250 */
-}
-
-static void __init py_rtc_setup(void)
-{
-	m48t37_base = ioremap(YOSEMITE_RTC_BASE, YOSEMITE_RTC_SIZE);
-	if (!m48t37_base)
-		printk(KERN_ERR "Mapping the RTC failed\n");
-}
-
-/* Not only time init but that's what the hook it's called through is named */
-static void __init py_late_time_init(void)
-{
-	py_map_ocd();
-	py_uart_setup();
-	py_rtc_setup();
-}
-
-void __init plat_mem_setup(void)
-{
-	late_time_init = py_late_time_init;
-
-	/* Add memory regions */
-	add_memory_region(0x00000000, 0x10000000, BOOT_MEM_RAM);
-
-#if 0 /* XXX Crash ...  */
-	OCD_WRITE(RM9000x2_OCD_HTSC,
-	          OCD_READ(RM9000x2_OCD_HTSC) | HYPERTRANSPORT_ENABLE);
-
-	/* Set the BAR. Shifted mode */
-	OCD_WRITE(RM9000x2_OCD_HTBAR0, HYPERTRANSPORT_BAR0_ADDR);
-	OCD_WRITE(RM9000x2_OCD_HTMASK0, HYPERTRANSPORT_SIZE0);
-#endif
-}

arch/mips/pmc-sierra/yosemite/setup.h

···
-/*
- * Copyright 2003, 04 PMC-Sierra
- * Author: Manish Lachwani ([e-mail])
- * Copyright 2004 Ralf Baechle <[e-mail]>
- *
- * Board specific definititions for the PMC-Sierra Yosemite
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef __SETUP_H__
-#define __SETUP_H__
-
-/* M48T37 RTC + NVRAM */
-#define	YOSEMITE_RTC_BASE		0xfc800000
-#define	YOSEMITE_RTC_SIZE		0x00800000
-
-#define HYPERTRANSPORT_BAR0_ADDR        0x00000006
-#define HYPERTRANSPORT_SIZE0            0x0fffffff
-#define HYPERTRANSPORT_BAR0_ATTR        0x00002000
-
-#define HYPERTRANSPORT_ENABLE           0x6
-
-/*
- * EEPROM Size
- */
-#define	TITAN_ATMEL_24C32_SIZE		32768
-#define	TITAN_ATMEL_24C64_SIZE		65536
-
-#endif /* __SETUP_H__ */

arch/mips/pmc-sierra/yosemite/smp.c

···
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-
-#include <asm/pmon.h>
-#include <asm/titan_dep.h>
-#include <asm/time.h>
-
-#define LAUNCHSTACK_SIZE 256
-
-static __cpuinitdata arch_spinlock_t launch_lock = __ARCH_SPIN_LOCK_UNLOCKED;
-
-static unsigned long secondary_sp __cpuinitdata;
-static unsigned long secondary_gp __cpuinitdata;
-
-static unsigned char launchstack[LAUNCHSTACK_SIZE] __initdata
-	__attribute__((aligned(2 * sizeof(long))));
-
-static void __init prom_smp_bootstrap(void)
-{
-	local_irq_disable();
-
-	while (arch_spin_is_locked(&launch_lock));
-
-	__asm__ __volatile__(
-	"	move	$sp, %0		\n"
-	"	move	$gp, %1		\n"
-	"	j	smp_bootstrap	\n"
-	:
-	: "r" (secondary_sp), "r" (secondary_gp));
-}
-
-/*
- * PMON is a fragile beast.  It'll blow up once the mappings it's littering
- * right into the middle of KSEG3 are blown away so we have to grab the slave
- * core early and keep it in a waiting loop.
- */
-void __init prom_grab_secondary(void)
-{
-	arch_spin_lock(&launch_lock);
-
-	pmon_cpustart(1, &prom_smp_bootstrap,
-	              launchstack + LAUNCHSTACK_SIZE, 0);
-}
-
-void titan_mailbox_irq(void)
-{
-	int cpu = smp_processor_id();
-	unsigned long status;
-
-	switch (cpu) {
-	case 0:
-		status = OCD_READ(RM9000x2_OCD_INTP0STATUS3);
-		OCD_WRITE(RM9000x2_OCD_INTP0CLEAR3, status);
-
-		if (status & 0x2)
-			smp_call_function_interrupt();
-		if (status & 0x4)
-			scheduler_ipi();
-		break;
-
-	case 1:
-		status = OCD_READ(RM9000x2_OCD_INTP1STATUS3);
-		OCD_WRITE(RM9000x2_OCD_INTP1CLEAR3, status);
-
-		if (status & 0x2)
-			smp_call_function_interrupt();
-		if (status & 0x4)
-			scheduler_ipi();
-		break;
-	}
-}
-
-/*
- * Send inter-processor interrupt
- */
-static void yos_send_ipi_single(int cpu, unsigned int action)
-{
-	/*
-	 * Generate an INTMSG so that it can be sent over to the
-	 * destination CPU. The INTMSG will put the STATUS bits
-	 * based on the action desired. An alternative strategy
-	 * is to write to the Interrupt Set register, read the
-	 * Interrupt Status register and clear the Interrupt
-	 * Clear register. The latter is preffered.
-	 */
-	switch (action) {
-	case SMP_RESCHEDULE_YOURSELF:
-		if (cpu == 1)
-			OCD_WRITE(RM9000x2_OCD_INTP1SET3, 4);
-		else
-			OCD_WRITE(RM9000x2_OCD_INTP0SET3, 4);
-		break;
-
-	case SMP_CALL_FUNCTION:
-		if (cpu == 1)
-			OCD_WRITE(RM9000x2_OCD_INTP1SET3, 2);
-		else
-			OCD_WRITE(RM9000x2_OCD_INTP0SET3, 2);
-		break;
-	}
-}
-
-static void yos_send_ipi_mask(const struct cpumask *mask, unsigned int action)
-{
-	unsigned int i;
-
-	for_each_cpu(i, mask)
-		yos_send_ipi_single(i, action);
-}
-
-/*
- *  After we've done initial boot, this function is called to allow the
- *  board code to clean up state, if needed
- */
-static void __cpuinit yos_init_secondary(void)
-{
-}
-
-static void __cpuinit yos_smp_finish(void)
-{
-	set_c0_status(ST0_CO | ST0_IM | ST0_IE);
-}
-
-/* Hook for after all CPUs are online */
-static void yos_cpus_done(void)
-{
-}
-
-/*
- * Firmware CPU startup hook
- * Complicated by PMON's weird interface which tries to minimic the UNIX fork.
- * It launches the next * available CPU and copies some information on the
- * stack so the first thing we do is throw away that stuff and load useful
- * values into the registers ...
- */
-static void __cpuinit yos_boot_secondary(int cpu, struct task_struct *idle)
-{
-	unsigned long gp = (unsigned long) task_thread_info(idle);
-	unsigned long sp = __KSTK_TOS(idle);
-
-	secondary_sp = sp;
-	secondary_gp = gp;
-
-	arch_spin_unlock(&launch_lock);
-}
-
-/*
- * Detect available CPUs, populate cpu_possible_mask before smp_init
- *
- * We don't want to start the secondary CPU yet nor do we have a nice probing
- * feature in PMON so we just assume presence of the secondary core.
- */
-static void __init yos_smp_setup(void)
-{
-	int i;
-
-	init_cpu_possible(cpu_none_mask);
-
-	for (i = 0; i < 2; i++) {
-		set_cpu_possible(i, true);
-		__cpu_number_map[i]	= i;
-		__cpu_logical_map[i]	= i;
-	}
-}
-
-static void __init yos_prepare_cpus(unsigned int max_cpus)
-{
-	/*
-	 * Be paranoid.  Enable the IPI only if we're really about to go SMP.
-	 */
-	if (num_possible_cpus())
-		set_c0_status(STATUSF_IP5);
-}
-
-struct plat_smp_ops yos_smp_ops = {
-	.send_ipi_single	= yos_send_ipi_single,
-	.send_ipi_mask		= yos_send_ipi_mask,
-	.init_secondary		= yos_init_secondary,
-	.smp_finish		= yos_smp_finish,
-	.cpus_done		= yos_cpus_done,
-	.boot_secondary		= yos_boot_secondary,
-	.smp_setup		= yos_smp_setup,
-	.prepare_cpus		= yos_prepare_cpus,
-};