ASoC: TWL4030: Capture route runtime DAPM ordering fix

Fix the ordering problem in DAPM domain, when the user
changes between digital and analog sources during active
capture (or loopback) scenario.
Before this patch, when the user changed from analog source
to digital there were a short time, when the codec enabled
analog mic bias (2.2 volts) instead of the correct digital
mic bias (1.8 volts) to the digital microphones.
This behaviour caused by the former implementation of
selecting the correct type of bias. This was done at the
POST_REG event of the DAPM_MUX_E("TXx Capture Route")
widget.
By moving the bias type selection as DAPM_SUPPLY and
connecting it to the corresponding digimic widget the
problematic situation can be avoided.

Signed-off-by: Peter Ujfalusi <[e-mail]>
Acked-by: Mark Brown <[e-mail]>
Signed-off-by: Liam Girdwood <[e-mail]>

sound/soc/codecs/twl4030.c

···
 			TWL4030_REG_VSTPGA, 0, 0x29, 0,
 			twl4030_dapm_dbypassv_tlv);
 
-static int micpath_event(struct snd_soc_dapm_widget *w,
-	struct snd_kcontrol *kcontrol, int event)
-{
-	struct soc_enum *e = (struct soc_enum *)w->kcontrols->private_value;
-	unsigned char adcmicsel, micbias_ctl;
-
-	adcmicsel = twl4030_read_reg_cache(w->codec, TWL4030_REG_ADCMICSEL);
-	micbias_ctl = twl4030_read_reg_cache(w->codec, TWL4030_REG_MICBIAS_CTL);
-	/* Prepare the bits for the given TX path:
-	 * shift_l == 0: TX1 microphone path
-	 * shift_l == 2: TX2 microphone path */
-	if (e->shift_l) {
-		/* TX2 microphone path */
-		if (adcmicsel & TWL4030_TX2IN_SEL)
-			micbias_ctl |= TWL4030_MICBIAS2_CTL; /* digimic */
-		else
-			micbias_ctl &= ~TWL4030_MICBIAS2_CTL;
-	} else {
-		/* TX1 microphone path */
-		if (adcmicsel & TWL4030_TX1IN_SEL)
-			micbias_ctl |= TWL4030_MICBIAS1_CTL; /* digimic */
-		else
-			micbias_ctl &= ~TWL4030_MICBIAS1_CTL;
-	}
-
-	twl4030_write(w->codec, TWL4030_REG_MICBIAS_CTL, micbias_ctl);
-
-	return 0;
-}
-
 /*
  * Output PGA builder:
  * Handle the muting and unmuting of the given output (turning off the
···
 	/* Analog/Digital mic path selection.
 	   TX1 Left/Right: either analog Left/Right or Digimic0
 	   TX2 Left/Right: either analog Left/Right or Digimic1 */
-	SND_SOC_DAPM_MUX_E("TX1 Capture Route", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_micpathtx1_control, micpath_event,
-		SND_SOC_DAPM_POST_REG),
-	SND_SOC_DAPM_MUX_E("TX2 Capture Route", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_micpathtx2_control, micpath_event,
-		SND_SOC_DAPM_POST_REG),
+	SND_SOC_DAPM_MUX("TX1 Capture Route", SND_SOC_NOPM, 0, 0,
+		&twl4030_dapm_micpathtx1_control),
+	SND_SOC_DAPM_MUX("TX2 Capture Route", SND_SOC_NOPM, 0, 0,
+		&twl4030_dapm_micpathtx2_control),
 
 	/* Analog input mixers for the capture amplifiers */
 	SND_SOC_DAPM_MIXER("Analog Left",
···
 	SND_SOC_DAPM_PGA_E("Digimic1 Enable",
 		TWL4030_REG_ADCMICSEL, 3, 0, NULL, 0,
 		digimic_event, SND_SOC_DAPM_POST_PMU),
+
+	SND_SOC_DAPM_SUPPLY("micbias1 select", TWL4030_REG_MICBIAS_CTL, 5, 0,
+			    NULL, 0),
+	SND_SOC_DAPM_SUPPLY("micbias2 select", TWL4030_REG_MICBIAS_CTL, 6, 0,
+			    NULL, 0),
 
 	SND_SOC_DAPM_MICBIAS("Mic Bias 1", TWL4030_REG_MICBIAS_CTL, 0, 0),
 	SND_SOC_DAPM_MICBIAS("Mic Bias 2", TWL4030_REG_MICBIAS_CTL, 1, 0),
···
 
 	{"Digimic0 Enable", NULL, "DIGIMIC0"},
 	{"Digimic1 Enable", NULL, "DIGIMIC1"},
+
+	{"DIGIMIC0", NULL, "micbias1 select"},
+	{"DIGIMIC1", NULL, "micbias2 select"},
 
 	/* TX1 Left capture path */
 	{"TX1 Capture Route", "Analog", "ADC Physical Left"},