Merge tag 'socfpga_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/drivers

SoCFPGA updates for v5.13
- Patches from Krzysztof Kozlowski the cleans up and consolidate support for
SoCFPGA platforms
- Rename ARCH_SOCFPGA into ARCH_INTEL_SOCFPGA
- Consolidate ARCH_STRATIX10 into ARCH_INTEL_SOCFPGA
- Consolidate ARCH_AGILEX into ARCH_INTEL_SOCFPGA
- Consolidate ARCH_N5X into ARCH_INTEL_SOCFPGA

* tag 'socfpga_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: drop ARCH_SOCFPGA
reset: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs
i2c: altera: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs
fpga: altera: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs
dmaengine: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs
clk: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs (and compile test)
clk: socfpga: allow compile testing of Stratix 10 / Agilex clocks
arm64: socfpga: merge Agilex and N5X into ARCH_INTEL_SOCFPGA
EDAC: altera: merge ARCH_SOCFPGA and ARCH_STRATIX10
clk: socfpga: merge ARCH_SOCFPGA and ARCH_STRATIX10
clk: socfpga: build together Stratix 10, Agilex and N5X clock drivers
net: stmmac: merge ARCH_SOCFPGA and ARCH_STRATIX10
mfd: altera: merge ARCH_SOCFPGA and ARCH_STRATIX10
ARM: socfpga: introduce common ARCH_INTEL_SOCFPGA
clk: socfpga: allow building N5X clocks with ARCH_N5X

Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Arnd Bergmann <[e-mail]>

arch/arm/Kconfig

···
 # selected platforms.
 config ARCH_NR_GPIO
 	int
-	default 2048 if ARCH_SOCFPGA
+	default 2048 if ARCH_INTEL_SOCFPGA
 	default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \
 		ARCH_ZYNQ || ARCH_ASPEED
 	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \

arch/arm/Kconfig.debug

···
 		  on SD5203 UART.
 
 	config DEBUG_SOCFPGA_UART0
-		depends on ARCH_SOCFPGA
+		depends on ARCH_INTEL_SOCFPGA
 		bool "Use SOCFPGA UART0 for low-level debug"
 		select DEBUG_UART_8250
 		help
···
 		  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
 
 	config DEBUG_SOCFPGA_ARRIA10_UART1
-		depends on ARCH_SOCFPGA
+		depends on ARCH_INTEL_SOCFPGA
 		bool "Use SOCFPGA Arria10 UART1 for low-level debug"
 		select DEBUG_UART_8250
 		help
···
 		  on SOCFPGA(Arria 10) based platforms.
 
 	config DEBUG_SOCFPGA_CYCLONE5_UART1
-		depends on ARCH_SOCFPGA
+		depends on ARCH_INTEL_SOCFPGA
 		bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug"
 		select DEBUG_UART_8250
 		help

arch/arm/Makefile

···
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
 machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
-machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
+machine-$(CONFIG_ARCH_INTEL_SOCFPGA)	+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi

arch/arm/boot/dts/Makefile

···
 	s5pv210-smdkc110.dtb \
 	s5pv210-smdkv210.dtb \
 	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SOCFPGA) += \
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
 	socfpga_arria10_socdk_nand.dtb \
 	socfpga_arria10_socdk_qspi.dtb \

arch/arm/configs/multi_v7_defconfig

···
 CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_RENESAS=y
-CONFIG_ARCH_SOCFPGA=y
+CONFIG_ARCH_INTEL_SOCFPGA=y
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR13XX=y
 CONFIG_MACH_SPEAR1310=y

arch/arm/configs/socfpga_defconfig

···
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
-CONFIG_ARCH_SOCFPGA=y
+CONFIG_ARCH_INTEL_SOCFPGA=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2

arch/arm/mach-socfpga/Kconfig

···
 # SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_SOCFPGA
+menuconfig ARCH_INTEL_SOCFPGA
 	bool "Altera SOCFPGA family"
 	depends on ARCH_MULTI_V7
 	select ARCH_SUPPORTS_BIG_ENDIAN
···
 	select PL310_ERRATA_753970 if PL310
 	select PL310_ERRATA_769419
 
-if ARCH_SOCFPGA
+if ARCH_INTEL_SOCFPGA
 config SOCFPGA_SUSPEND
 	bool "Suspend to RAM on SOCFPGA"
 	help

arch/arm64/Kconfig.platforms

···
 	help
 	  This enables support for the Actions Semiconductor S900 SoC family.
 
-config ARCH_AGILEX
-	bool "Intel's Agilex SoCFPGA Family"
-	help
-	  This enables support for Intel's Agilex SoCFPGA Family.
-
-config ARCH_N5X
-	bool "Intel's eASIC N5X SoCFPGA Family"
-	help
-	  This enables support for Intel's eASIC N5X SoCFPGA Family.
-
 config ARCH_SUNXI
 	bool "Allwinner sunxi 64-bit SoC Family"
 	select ARCH_HAS_RESET_CONTROLLER
···
 	help
 	  This enables support for AMD Seattle SOC Family
 
-config ARCH_STRATIX10
-	bool "Altera's Stratix 10 SoCFPGA Family"
+config ARCH_INTEL_SOCFPGA
+	bool "Intel's SoCFPGA ARMv8 Families"
 	help
-	  This enables support for Altera's Stratix 10 SoCFPGA Family.
+	  This enables support for Intel's SoCFPGA ARMv8 families:
+	  Stratix 10 (ex. Altera), Agilex and eASIC N5X.
 
 config ARCH_SYNQUACER
 	bool "Socionext SynQuacer SoC Family"

arch/arm64/boot/dts/altera/Makefile

···
 # SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb \
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_stratix10_socdk.dtb \
 				socfpga_stratix10_socdk_nand.dtb

arch/arm64/boot/dts/intel/Makefile

···
 # SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \
-			     socfpga_agilex_socdk_nand.dtb
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_socdk.dtb \
+				socfpga_agilex_socdk_nand.dtb \
+				socfpga_n5x_socdk.dtb
 dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
-dtb-$(CONFIG_ARCH_N5X) += socfpga_n5x_socdk.dtb

arch/arm64/configs/defconfig

···
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_S32=y
 CONFIG_ARCH_SEATTLE=y
-CONFIG_ARCH_STRATIX10=y
+CONFIG_ARCH_INTEL_SOCFPGA=y
 CONFIG_ARCH_SYNQUACER=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_ARCH_SPRD=y

drivers/clk/Kconfig

···
 source "drivers/clk/rockchip/Kconfig"
 source "drivers/clk/samsung/Kconfig"
 source "drivers/clk/sifive/Kconfig"
+source "drivers/clk/socfpga/Kconfig"
 source "drivers/clk/sprd/Kconfig"
 source "drivers/clk/sunxi/Kconfig"
 source "drivers/clk/sunxi-ng/Kconfig"

drivers/clk/Makefile

···
 obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
 obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
 obj-$(CONFIG_CLK_SIFIVE)		+= sifive/
-obj-$(CONFIG_ARCH_SOCFPGA)		+= socfpga/
-obj-$(CONFIG_ARCH_AGILEX)		+= socfpga/
-obj-$(CONFIG_ARCH_STRATIX10)		+= socfpga/
+obj-y					+= socfpga/
 obj-$(CONFIG_PLAT_SPEAR)		+= spear/
 obj-y					+= sprd/
 obj-$(CONFIG_ARCH_STI)			+= st/

drivers/clk/socfpga/Kconfig

···
+# SPDX-License-Identifier: GPL-2.0
+config CLK_INTEL_SOCFPGA
+	bool "Intel SoCFPGA family clock support" if COMPILE_TEST && !ARCH_INTEL_SOCFPGA
+	default ARCH_INTEL_SOCFPGA
+	help
+	  Support for the clock controllers present on Intel SoCFPGA and eASIC
+	  devices like Aria, Cyclone, Stratix 10, Agilex and N5X eASIC.
+
+if CLK_INTEL_SOCFPGA
+
+config CLK_INTEL_SOCFPGA32
+	bool "Intel Aria / Cyclone clock controller support" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA)
+	default ARM && ARCH_INTEL_SOCFPGA
+
+config CLK_INTEL_SOCFPGA64
+	bool "Intel Stratix / Agilex / N5X clock controller support" if COMPILE_TEST && (!ARM64 || !ARCH_INTEL_SOCFPGA)
+	default ARM64 && ARCH_INTEL_SOCFPGA
+
+endif # CLK_INTEL_SOCFPGA

drivers/clk/socfpga/Makefile

···
 # SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_ARCH_SOCFPGA) += clk.o clk-gate.o clk-pll.o clk-periph.o
-obj-$(CONFIG_ARCH_SOCFPGA) += clk-pll-a10.o clk-periph-a10.o clk-gate-a10.o
-obj-$(CONFIG_ARCH_STRATIX10) += clk-s10.o
-obj-$(CONFIG_ARCH_STRATIX10) += clk-pll-s10.o clk-periph-s10.o clk-gate-s10.o
-obj-$(CONFIG_ARCH_AGILEX) += clk-agilex.o
-obj-$(CONFIG_ARCH_AGILEX) += clk-pll-s10.o clk-periph-s10.o clk-gate-s10.o
+obj-$(CONFIG_CLK_INTEL_SOCFPGA32) += clk.o clk-gate.o clk-pll.o clk-periph.o \
+				     clk-pll-a10.o clk-periph-a10.o clk-gate-a10.o
+obj-$(CONFIG_CLK_INTEL_SOCFPGA64) += clk-s10.o \
+				     clk-pll-s10.o clk-periph-s10.o clk-gate-s10.o \
+				     clk-agilex.o

drivers/dma/Kconfig

···
 
 config AXI_DMAC
 	tristate "Analog Devices AXI-DMAC DMA support"
-	depends on MICROBLAZE || NIOS2 || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_SOCFPGA || COMPILE_TEST
+	depends on MICROBLAZE || NIOS2 || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_INTEL_SOCFPGA || COMPILE_TEST
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	select REGMAP_MMIO

drivers/edac/Kconfig

···
 
 config EDAC_ALTERA
 	bool "Altera SOCFPGA ECC"
-	depends on EDAC=y && (ARCH_SOCFPGA || ARCH_STRATIX10)
+	depends on EDAC=y && ARCH_INTEL_SOCFPGA
 	help
 	  Support for error detection and correction on the
 	  Altera SOCs. This is the global enable for the

drivers/edac/altera_edac.c

···
 	dci->mod_name = ecc_name;
 	dci->dev_name = ecc_name;
 
-	/* Update the PortB IRQs - A10 has 4, S10 has 2, Index accordingly */
-#ifdef CONFIG_ARCH_STRATIX10
+	/*
+	 * Update the PortB IRQs - A10 has 4, S10 has 2, Index accordingly
+	 *
+	 * FIXME: Instead of ifdefs with different architectures the driver
+	 *        should properly use compatibles.
+	 */
+#ifdef CONFIG_64BIT
 	altdev->sb_irq = irq_of_parse_and_map(np, 1);
 #else
 	altdev->sb_irq = irq_of_parse_and_map(np, 2);
···
 		goto err_release_group_1;
 	}
 
-#ifdef CONFIG_ARCH_STRATIX10
+#ifdef CONFIG_64BIT
 	/* Use IRQ to determine SError origin instead of assigning IRQ */
 	rc = of_property_read_u32_index(np, "interrupts", 1, &altdev->db_irq);
 	if (rc) {
···
 		goto err_release_group1;
 	}
 
-#ifdef CONFIG_ARCH_STRATIX10
+#ifdef CONFIG_64BIT
 	/* Use IRQ to determine SError origin instead of assigning IRQ */
 	rc = of_property_read_u32_index(np, "interrupts", 0, &altdev->db_irq);
 	if (rc) {
···
 /************** Stratix 10 EDAC Double Bit Error Handler ************/
 #define to_a10edac(p, m) container_of(p, struct altr_arria10_edac, m)
 
-#ifdef CONFIG_ARCH_STRATIX10
+#ifdef CONFIG_64BIT
 /* panic routine issues reboot on non-zero panic_timeout */
 extern int panic_timeout;
 
···
 					 altr_edac_a10_irq_handler,
 					 edac);
 
-#ifdef CONFIG_ARCH_STRATIX10
+#ifdef CONFIG_64BIT
 	{
 		int dberror, err_addr;
 

drivers/firmware/Kconfig

···
 
 config INTEL_STRATIX10_SERVICE
 	tristate "Intel Stratix10 Service Layer"
-	depends on (ARCH_STRATIX10 || ARCH_AGILEX) && HAVE_ARM_SMCCC
+	depends on ARCH_INTEL_SOCFPGA && HAVE_ARM_SMCCC
 	default n
 	help
 	  Intel Stratix10 service layer runs at privileged exception level,

drivers/fpga/Kconfig

···
 
 config FPGA_MGR_SOCFPGA
 	tristate "Altera SOCFPGA FPGA Manager"
-	depends on ARCH_SOCFPGA || COMPILE_TEST
+	depends on ARCH_INTEL_SOCFPGA || COMPILE_TEST
 	help
 	  FPGA manager driver support for Altera SOCFPGA.
 
 config FPGA_MGR_SOCFPGA_A10
 	tristate "Altera SoCFPGA Arria10"
-	depends on ARCH_SOCFPGA || COMPILE_TEST
+	depends on ARCH_INTEL_SOCFPGA || COMPILE_TEST
 	select REGMAP_MMIO
 	help
 	  FPGA manager driver support for Altera Arria10 SoCFPGA.
···
 
 config FPGA_MGR_STRATIX10_SOC
 	tristate "Intel Stratix10 SoC FPGA Manager"
-	depends on (ARCH_STRATIX10 && INTEL_STRATIX10_SERVICE)
+	depends on (ARCH_INTEL_SOCFPGA && INTEL_STRATIX10_SERVICE)
 	help
 	  FPGA manager driver support for the Intel Stratix10 SoC.
 
···
 
 config SOCFPGA_FPGA_BRIDGE
 	tristate "Altera SoCFPGA FPGA Bridges"
-	depends on ARCH_SOCFPGA && FPGA_BRIDGE
+	depends on ARCH_INTEL_SOCFPGA && FPGA_BRIDGE
 	help
 	  Say Y to enable drivers for FPGA bridges for Altera SOCFPGA
 	  devices.

drivers/i2c/busses/Kconfig

···
 
 config I2C_ALTERA
 	tristate "Altera Soft IP I2C"
-	depends on ARCH_SOCFPGA || NIOS2 || COMPILE_TEST
+	depends on ARCH_INTEL_SOCFPGA || NIOS2 || COMPILE_TEST
 	depends on OF
 	help
 	  If you say yes to this option, support will be included for the

drivers/mfd/Kconfig

···
 
 config MFD_ALTERA_A10SR
 	bool "Altera Arria10 DevKit System Resource chip"
-	depends on ARCH_SOCFPGA && SPI_MASTER=y && OF
+	depends on ARCH_INTEL_SOCFPGA && SPI_MASTER=y && OF
 	select REGMAP_SPI
 	select MFD_CORE
 	help
···
 
 config MFD_ALTERA_SYSMGR
 	bool "Altera SOCFPGA System Manager"
-	depends on (ARCH_SOCFPGA || ARCH_STRATIX10) && OF
+	depends on ARCH_INTEL_SOCFPGA && OF
 	select MFD_SYSCON
 	help
 	  Select this to get System Manager support for all Altera branded

drivers/net/ethernet/stmicro/stmmac/Kconfig

···
 
 config DWMAC_SOCFPGA
 	tristate "SOCFPGA dwmac support"
-	default (ARCH_SOCFPGA || ARCH_STRATIX10)
-	depends on OF && (ARCH_SOCFPGA || ARCH_STRATIX10 || COMPILE_TEST)
+	default ARCH_INTEL_SOCFPGA
+	depends on OF && (ARCH_INTEL_SOCFPGA || COMPILE_TEST)
 	select MFD_SYSCON
 	help
 	  Support for ethernet controller on Altera SOCFPGA

drivers/reset/Kconfig

···
 
 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST
-	default ARCH_AGILEX || ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARC
+	default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
 	help
 	  This enables a simple reset controller driver for reset lines that
 	  that can be asserted and deasserted by toggling bits in a contiguous,
···
 	  This enables the RCC reset controller driver for STM32 MPUs.
 
 config RESET_SOCFPGA
-	bool "SoCFPGA Reset Driver" if COMPILE_TEST && !ARCH_SOCFPGA
-	default ARCH_SOCFPGA
+	bool "SoCFPGA Reset Driver" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA)
+	default ARM && ARCH_INTEL_SOCFPGA
 	select RESET_SIMPLE
 	help
 	  This enables the reset driver for the SoCFPGA ARMv7 platforms. This