Merge tag 'soc-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC fixes from Arnd Bergmann:
"These are mainly devicetree fixes for the rockchip and nxp platforms
on arm64, addressing mistakes in the board and soc specific
descriptions.

In particular the newly added Rock 5T board required multiple bugfixes
for PCIe and USB, while on the i.MX platform there are a number of
regulator related fixes. The only other platforms with devicetree
fixes are at91 with a fixup for SD/MMC and a change to enable all the
available UARTS on the Axiado reference board.

Also on the at91 platform, a Kconfig change addresses a regression
that stopped the DMA engine from working in 6.17-rc.

Three drivers each have a simple bugfix, stopping incorrect behavior
in op-tee firmware, the tee subsystem and the qualcomm mdt_loader.

Two trivial MAINTAINERS file changes are needed to make sure that
patches reach the correct maintainer, but don't change the actual
responsibilities"

* tag 'soc-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
ARM: dts: microchip: sama7d65: Force SDMMC Legacy mode
ARM: at91: select ARCH_MICROCHIP
arm64: dts: rockchip: fix second M.2 slot on ROCK 5T
arm64: dts: rockchip: fix USB on RADXA ROCK 5T
MAINTAINERS: exclude defconfig from ARM64 PORT
arm64: dts: axiado: Add missing UART aliases
MAINTAINERS: Update Nobuhiro Iwamatsu's email address
arm64: dts: rockchip: Add vcc-supply to SPI flash on Pinephone Pro
arm64: dts: rockchip: fix es8388 address on rk3588s-roc-pc
arm64: dts: rockchip: Fix Bluetooth interrupts flag on Neardi LBA3368
arm64: dts: rockchip: correct network description on Sige5
arm64: dts: rockchip: Minor whitespace cleanup
ARM: dts: rockchip: Minor whitespace cleanup
arm64: dts: rockchip: Add supplies for eMMC on rk3588-orangepi-5
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5 plus
arm64: dts: imx95: Fix JPEG encoder node assigned clock
arm64: dts: imx95-19x19-evk: correct the phy setting for flexcan1/2
arm64: dts: imx8mp: Fix missing microSD slot vqmmc on Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp: Fix missing microSD slot vqmmc on DH electronics i.MX8M Plus DHCOM
arm64: dts: imx8mp-tqma8mpql: remove virtual 3.3V regulator
...

.mailmap

···
 Nikolay Aleksandrov <[e-mail]> <[e-mail]>
 Nikolay Aleksandrov <[e-mail]> <[e-mail]>
 Nikolay Aleksandrov <[e-mail]> <[e-mail]>
+Nobuhiro Iwamatsu <[e-mail]> <[e-mail]>
 Odelu Kukatla <[e-mail]> <[e-mail]>
 Oleksandr Natalenko <[e-mail]> <[e-mail]>
 Oleksij Rempel <[e-mail]> <[e-mail]>

MAINTAINERS

···
 F:	arch/arm/boot/dts/nspire/
 
 ARM/TOSHIBA VISCONTI ARCHITECTURE
-M:	Nobuhiro Iwamatsu <[e-mail]>
+M:	Nobuhiro Iwamatsu <[e-mail]>
 L:	[e-mail] (moderated for non-subscribers)
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti.git
···
 F:	drivers/virt/coco/pkvm-guest/
 F:	tools/testing/selftests/arm64/
 X:	arch/arm64/boot/dts/
+X:	arch/arm64/configs/defconfig
 
 ARROW SPEEDCHIPS XRS7000 SERIES ETHERNET SWITCH DRIVER
 M:	George McCollister <[e-mail]>

arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts

···
 
 &sdmmc1 {
 	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc1_default>;
 	status = "okay";

arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts

···
 	phy-mode = "rmii";
 	phy-handle = <&phy0>;
 	assigned-clocks = <&cru SCLK_MAC_SRC>;
-	assigned-clock-rates= <50000000>;
+	assigned-clock-rates = <50000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&rmii_pins>;
 	status = "okay";

arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts

···
 &i2s0 {
 	/delete-property/ pinctrl-0;
 	rockchip,trcm-sync-rx-only;
-	pinctrl-0 =  <&i2s0m0_sclk_rx>,
-		     <&i2s0m0_lrck_rx>,
-		     <&i2s0m0_sdi0>;
+	pinctrl-0 = <&i2s0m0_sclk_rx>,
+		    <&i2s0m0_lrck_rx>,
+		    <&i2s0m0_sdi0>;
 	pinctrl-names = "default";
 	status = "okay";
 };

arch/arm/mach-at91/Kconfig

···
 # SPDX-License-Identifier: GPL-2.0-only
+config ARCH_MICROCHIP
+	bool
+
 menuconfig ARCH_AT91
 	bool "AT91/Microchip SoCs"
 	depends on (CPU_LITTLE_ENDIAN && (ARCH_MULTI_V4T || ARCH_MULTI_V5)) || \
···
 	select GPIOLIB
 	select PINCTRL
 	select SOC_BUS
+	select ARCH_MICROCHIP
 
 if ARCH_AT91
 config SOC_SAMV7

arch/arm64/boot/dts/axiado/ax3000-evk.dts

···
 	#size-cells = <2>;
 
 	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
 		serial3 = &uart3;
 	};
 

arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts

···
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
 	bus-width = <4>;
 	status = "okay";
 };

arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi

···
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
 	bus-width = <4>;
 	status = "okay";
 };

arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts

···
 	status = "okay";
 };
 
+&reg_usdhc2_vqmmc {
+	status = "okay";
+};
+
 &sai5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai5>;
···
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
···
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
···
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {

arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts

···
 	status = "okay";
 };
 
+&reg_usdhc2_vqmmc {
+	status = "okay";
+};
+
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
···
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
···
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
···
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {

arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi

···
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
 
-	/* identical to buck4_reg, but should never change */
-	reg_vcc3v3: regulator-vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3";
-		regulator-min-microvolt = <3300000>;
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vqmmc>;
+		regulator-name = "V_SD2";
+		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		vin-supply = <&ldo5_reg>;
+		status = "disabled";
 	};
 };
 
···
 		read-only;
 		reg = <0x53>;
 		pagesize = <16>;
-		vcc-supply = <&reg_vcc3v3>;
+		vcc-supply = <&buck4_reg>;
 	};
 
 	m24c64: eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
-		vcc-supply = <&reg_vcc3v3>;
+		vcc-supply = <&buck4_reg>;
 	};
+};
+
+&usdhc2 {
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
 };
 
 &usdhc3 {
···
 	non-removable;
 	no-sd;
 	no-sdio;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&buck4_reg>;
 	vqmmc-supply = <&buck5_reg>;
 	status = "okay";
 };
···
 
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x10>;
+	};
+
+	pinctrl_reg_usdhc2_vqmmc: regusdhc2vqmmcgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04		0xc0>;
 	};
 
 	pinctrl_usdhc3: usdhc3grp {

arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts

···
 	flexcan1_phy: can-phy0 {
 		compatible = "nxp,tjr1443";
 		#phy-cells = <0>;
-		max-bitrate = <1000000>;
+		max-bitrate = <8000000>;
 		enable-gpios = <&i2c6_pcal6416 6 GPIO_ACTIVE_HIGH>;
-		standby-gpios = <&i2c6_pcal6416 5 GPIO_ACTIVE_HIGH>;
+		standby-gpios = <&i2c6_pcal6416 5 GPIO_ACTIVE_LOW>;
 	};
 
 	flexcan2_phy: can-phy1 {
 		compatible = "nxp,tjr1443";
 		#phy-cells = <0>;
-		max-bitrate = <1000000>;
-		enable-gpios = <&i2c6_pcal6416 4 GPIO_ACTIVE_HIGH>;
-		standby-gpios = <&i2c6_pcal6416 3 GPIO_ACTIVE_HIGH>;
+		max-bitrate = <8000000>;
+		enable-gpios = <&i2c4_gpio_expander_21 4 GPIO_ACTIVE_HIGH>;
+		standby-gpios = <&i2c4_gpio_expander_21 3 GPIO_ACTIVE_LOW>;
 	};
 
 	reg_vref_1v8: regulator-1p8v {

arch/arm64/boot/dts/freescale/imx95.dtsi

···
 				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&scmi_clk IMX95_CLK_VPU>,
 				 <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>;
-			assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>;
+			assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>;
 			assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>;
 			power-domains = <&scmi_devpd IMX95_PD_VPU>;
 		};

arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi

···
 	};
 
 	vcc_cam_avdd: regulator-vcc-cam-avdd {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		regulator-name = "vcc_cam_avdd";
 		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
···
 	};
 
 	vcc_cam_dovdd: regulator-vcc-cam-dovdd {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		regulator-name = "vcc_cam_dovdd";
 		gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
···
 	};
 
 	vcc_cam_dvdd: regulator-vcc-cam-dvdd {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		regulator-name = "vcc_cam_dvdd";
 		gpio = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
···
 	};
 
 	vcc_lens_afvdd: regulator-vcc-lens-afvdd {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		regulator-name = "vcc_lens_afvdd";
 		gpio = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";

arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso

···
 	};
 
 	cam_afvdd_2v8: regulator-cam-afvdd-2v8 {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		gpio = <&pca9670 2 GPIO_ACTIVE_LOW>;
 		regulator-max-microvolt = <2800000>;
 		regulator-min-microvolt = <2800000>;
···
 	};
 
 	cam_avdd_2v8: regulator-cam-avdd-2v8 {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		gpio = <&pca9670 4 GPIO_ACTIVE_LOW>;
 		regulator-max-microvolt = <2800000>;
 		regulator-min-microvolt = <2800000>;
···
 	};
 
 	cam_dovdd_1v8: regulator-cam-dovdd-1v8 {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 	        gpio = <&pca9670 3 GPIO_ACTIVE_LOW>;
 	        regulator-max-microvolt = <1800000>;
 	        regulator-min-microvolt = <1800000>;

arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts

···
 	status = "okay";
 };
 
-&usb_host_ohci{
+&usb_host_ohci {
 	status = "okay";
 };

arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts

···
 
 	bluetooth {
 		compatible = "brcm,bcm4345c5";
-		interrupts-extended = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+		interrupts-extended = <&gpio3 RK_PA7 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "host-wakeup";
 		clocks = <&rk808 RK808_CLKOUT1>;
 		clock-names = "lpo";

arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts

···
 		reg = <0>;
 		m25p,fast-read;
 		spi-max-frequency = <10000000>;
+		vcc-supply = <&vcc_3v0>;
 	};
 };
 

arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts

···
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
+		vcc-supply = <&vcc_1v8>;
 	};
 };
 

arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso

···
 	};
 
 	cam_afvdd_2v8: regulator-cam-afvdd-2v8 {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		gpio = <&pca9670 2 GPIO_ACTIVE_LOW>;
 		regulator-max-microvolt = <2800000>;
 		regulator-min-microvolt = <2800000>;
···
 	};
 
 	cam_avdd_2v8: regulator-cam-avdd-2v8 {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		gpio = <&pca9670 4 GPIO_ACTIVE_LOW>;
 		regulator-max-microvolt = <2800000>;
 		regulator-min-microvolt = <2800000>;
···
 	};
 
 	cam_dovdd_1v8: regulator-cam-dovdd-1v8 {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 	        gpio = <&pca9670 3 GPIO_ACTIVE_LOW>;
 	        regulator-max-microvolt = <1800000>;
 	        regulator-min-microvolt = <1800000>;

arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi

···
 			gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 			pinctrl-names = "default";
-			pinctrl-0 =<&blue_led>;
+			pinctrl-0 = <&blue_led>;
 		};
 
 		led-1 {
···
 			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 			pinctrl-names = "default";
-			pinctrl-0 =<&heartbeat_led>;
+			pinctrl-0 = <&heartbeat_led>;
 		};
 	};
 

arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts

···
 		     &eth1m0_tx_bus2
 		     &eth1m0_rx_bus2
 		     &eth1m0_rgmii_clk
-		     &eth1m0_rgmii_bus
-		     &ethm0_clk1_25m_out>;
+		     &eth1m0_rgmii_bus>;
 	status = "okay";
 };
 
···
 	rgmii_phy0: phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <0x1>;
-		clocks = <&cru REFCLKO25M_GMAC0_OUT>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&gmac0_rst>;
 		reset-assert-us = <20000>;
···
 	rgmii_phy1: phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <0x1>;
-		clocks = <&cru REFCLKO25M_GMAC1_OUT>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&gmac1_rst>;
 		reset-assert-us = <20000>;

arch/arm64/boot/dts/rockchip/rk3582-radxa-e52c.dts

···
 		compatible = "belling,bl24c16a", "atmel,24c16";
 		reg = <0x50>;
 		pagesize = <16>;
+		read-only;
 		vcc-supply = <&vcc_3v3_pmu>;
 	};
 };

arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts

···
 	pinctrl-names = "default";
 	pinctrl-0 = <&hp_detect>;
 	simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
-	simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
+	simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
 	simple-audio-card,widgets =
 		"Microphone", "Onboard Microphone",
 		"Microphone", "Microphone Jack",

arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi

···
 	max-frequency = <200000000>;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc_1v8_s3>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts

···
 	status = "okay";
 };
 
+&pcie30phy {
+	data-lanes = <1 1 2 2>;
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3x2_rst>;
+	reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pcie3x4 {
+	num-lanes = <2>;
+};
+
 &pinctrl {
 	hdmirx {
 		hdmirx_hpd: hdmirx-5v-detection {
···
 		};
 	};
 
+	pcie3 {
+		pcie3x2_rst: pcie3x2-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	sound {
 		hp_detect: hp-detect {
 			rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };
···
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2_0_vcc3v3_en>;
 	status = "okay";
+};
+
+&vcc5v0_host {
+	enable-active-high;
+	gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_host_en>;
 };

arch/arm64/boot/dts/rockchip/rk3588j.dtsi

···
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-1200000000{
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <750000 750000 950000>;
 			clock-latency-ns = <40000>;
···
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-1200000000{
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <750000 750000 950000>;
 			clock-latency-ns = <40000>;

arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts

···
 &i2c3 {
 	status = "okay";
 
-	es8388: audio-codec@10 {
+	es8388: audio-codec@11 {
 		compatible = "everest,es8388", "everest,es8328";
-		reg = <0x10>;
+		reg = <0x11>;
 		clocks = <&cru I2S1_8CH_MCLKOUT>;
 		AVDD-supply = <&vcc_3v3_s0>;
 		DVDD-supply = <&vcc_1v8_s0>;

drivers/soc/qcom/mdt_loader.c

···
 	if (phend > fw->size)
 		return false;
 
-	if (ehdr->e_shentsize != sizeof(struct elf32_shdr))
-		return false;
+	if (ehdr->e_shentsize || ehdr->e_shnum) {
+		if (ehdr->e_shentsize != sizeof(struct elf32_shdr))
+			return false;
 
-	shend = size_add(size_mul(sizeof(struct elf32_shdr), ehdr->e_shnum), ehdr->e_shoff);
-	if (shend > fw->size)
-		return false;
+		shend = size_add(size_mul(sizeof(struct elf32_shdr), ehdr->e_shnum), ehdr->e_shoff);
+		if (shend > fw->size)
+			return false;
+	}
 
 	return true;
 }

drivers/tee/optee/ffa_abi.c

···
  * with a matching configuration.
  */
 
-static bool optee_ffa_api_is_compatbile(struct ffa_device *ffa_dev,
+static bool optee_ffa_api_is_compatible(struct ffa_device *ffa_dev,
 					const struct ffa_ops *ops)
 {
 	const struct ffa_msg_ops *msg_ops = ops->msg_ops;
···
 	ffa_ops = ffa_dev->ops;
 	notif_ops = ffa_ops->notifier_ops;
 
-	if (!optee_ffa_api_is_compatbile(ffa_dev, ffa_ops))
+	if (!optee_ffa_api_is_compatible(ffa_dev, ffa_ops))
 		return -EINVAL;
 
 	if (!optee_ffa_exchange_caps(ffa_dev, ffa_ops, &sec_caps,

drivers/tee/tee_shm.c

···
 	pages = kcalloc(nr_pages, sizeof(*pages), GFP_KERNEL);
 	if (!pages) {
 		rc = -ENOMEM;
-		goto err;
+		goto err_pages;
 	}
 
 	for (i = 0; i < nr_pages; i++)
···
 		rc = shm_register(shm->ctx, shm, pages, nr_pages,
 				  (unsigned long)shm->kaddr);
 		if (rc)
-			goto err;
+			goto err_kfree;
 	}
 
 	return 0;
-err:
+err_kfree:
+	kfree(pages);
+err_pages:
 	free_pages_exact(shm->kaddr, shm->size);
 	shm->kaddr = NULL;
 	return rc;
···
  */
 void tee_shm_put(struct tee_shm *shm)
 {
-	struct tee_device *teedev = shm->ctx->teedev;
+	struct tee_device *teedev;
 	bool do_release = false;
 
+	if (!shm || !shm->ctx || !shm->ctx->teedev)
+		return;
+
+	teedev = shm->ctx->teedev;
 	mutex_lock(&teedev->mutex);
 	if (refcount_dec_and_test(&shm->refcount)) {
 		/*